--- /dev/null
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _HW_H_
+#define _HW_H_
+
+#include "targaddrs.h"
+
+#define ATH10K_FW_DIR "ath10k"
+
+/* QCA988X 1.0 definitions (unsupported) */
+#define QCA988X_HW_1_0_CHIP_ID_REV 0x0
+
+/* QCA988X 2.0 definitions */
+#define QCA988X_HW_2_0_VERSION 0x4100016c
+#define QCA988X_HW_2_0_CHIP_ID_REV 0x2
+#define QCA988X_HW_2_0_FW_DIR ATH10K_FW_DIR "/QCA988X/hw2.0"
+#define QCA988X_HW_2_0_FW_FILE "firmware.bin"
+#define QCA988X_HW_2_0_OTP_FILE "otp.bin"
+#define QCA988X_HW_2_0_BOARD_DATA_FILE "board.bin"
+#define QCA988X_HW_2_0_PATCH_LOAD_ADDR 0x1234
+
+/* QCA6174 target BMI version signatures */
+#define QCA6174_HW_1_0_VERSION 0x05000000
+#define QCA6174_HW_1_1_VERSION 0x05000001
+#define QCA6174_HW_1_3_VERSION 0x05000003
+#define QCA6174_HW_2_1_VERSION 0x05010000
+#define QCA6174_HW_3_0_VERSION 0x05020000
+#define QCA6174_HW_3_2_VERSION 0x05030000
+
+enum qca6174_pci_rev {
+ QCA6174_PCI_REV_1_1 = 0x11,
+ QCA6174_PCI_REV_1_3 = 0x13,
+ QCA6174_PCI_REV_2_0 = 0x20,
+ QCA6174_PCI_REV_3_0 = 0x30,
+};
+
+enum qca6174_chip_id_rev {
+ QCA6174_HW_1_0_CHIP_ID_REV = 0,
+ QCA6174_HW_1_1_CHIP_ID_REV = 1,
+ QCA6174_HW_1_3_CHIP_ID_REV = 2,
+ QCA6174_HW_2_1_CHIP_ID_REV = 4,
+ QCA6174_HW_2_2_CHIP_ID_REV = 5,
+ QCA6174_HW_3_0_CHIP_ID_REV = 8,
+ QCA6174_HW_3_1_CHIP_ID_REV = 9,
+ QCA6174_HW_3_2_CHIP_ID_REV = 10,
+};
+
+#define QCA6174_HW_2_1_FW_DIR "ath10k/QCA6174/hw2.1"
+#define QCA6174_HW_2_1_FW_FILE "firmware.bin"
+#define QCA6174_HW_2_1_OTP_FILE "otp.bin"
+#define QCA6174_HW_2_1_BOARD_DATA_FILE "board.bin"
+#define QCA6174_HW_2_1_PATCH_LOAD_ADDR 0x1234
+
+#define QCA6174_HW_3_0_FW_DIR "ath10k/QCA6174/hw3.0"
+#define QCA6174_HW_3_0_FW_FILE "firmware.bin"
+#define QCA6174_HW_3_0_OTP_FILE "otp.bin"
+#define QCA6174_HW_3_0_BOARD_DATA_FILE "board.bin"
+#define QCA6174_HW_3_0_PATCH_LOAD_ADDR 0x1234
+
+#define ATH10K_FW_API2_FILE "firmware-2.bin"
+#define ATH10K_FW_API3_FILE "firmware-3.bin"
+
+/* added support for ATH10K_FW_IE_WMI_OP_VERSION */
+#define ATH10K_FW_API4_FILE "firmware-4.bin"
+
+#define ATH10K_FW_UTF_FILE "utf.bin"
+
+/* includes also the null byte */
+#define ATH10K_FIRMWARE_MAGIC "QCA-ATH10K"
+
+#define REG_DUMP_COUNT_QCA988X 60
+
+#define QCA988X_CAL_DATA_LEN 2116
+
+struct ath10k_fw_ie {
+ __le32 id;
+ __le32 len;
+ u8 data[0];
+};
+
+enum ath10k_fw_ie_type {
+ ATH10K_FW_IE_FW_VERSION = 0,
+ ATH10K_FW_IE_TIMESTAMP = 1,
+ ATH10K_FW_IE_FEATURES = 2,
+ ATH10K_FW_IE_FW_IMAGE = 3,
+ ATH10K_FW_IE_OTP_IMAGE = 4,
+
+ /* WMI "operations" interface version, 32 bit value. Supported from
+ * FW API 4 and above.
+ */
+ ATH10K_FW_IE_WMI_OP_VERSION = 5,
+};
+
+enum ath10k_fw_wmi_op_version {
+ ATH10K_FW_WMI_OP_VERSION_UNSET = 0,
+
+ ATH10K_FW_WMI_OP_VERSION_MAIN = 1,
+ ATH10K_FW_WMI_OP_VERSION_10_1 = 2,
+ ATH10K_FW_WMI_OP_VERSION_10_2 = 3,
+ ATH10K_FW_WMI_OP_VERSION_TLV = 4,
+ ATH10K_FW_WMI_OP_VERSION_10_2_4 = 5,
+
+ /* keep last */
+ ATH10K_FW_WMI_OP_VERSION_MAX,
+};
+
+enum ath10k_hw_rev {
+ ATH10K_HW_QCA988X,
+ ATH10K_HW_QCA6174,
+};
+
+struct ath10k_hw_regs {
+ u32 rtc_state_cold_reset_mask;
+ u32 rtc_soc_base_address;
+ u32 rtc_wmac_base_address;
+ u32 soc_core_base_address;
+ u32 ce_wrapper_base_address;
+ u32 ce0_base_address;
+ u32 ce1_base_address;
+ u32 ce2_base_address;
+ u32 ce3_base_address;
+ u32 ce4_base_address;
+ u32 ce5_base_address;
+ u32 ce6_base_address;
+ u32 ce7_base_address;
+ u32 soc_reset_control_si0_rst_mask;
+ u32 soc_reset_control_ce_rst_mask;
+ u32 soc_chip_id_address;
+ u32 scratch_3_address;
+};
+
+extern const struct ath10k_hw_regs qca988x_regs;
+extern const struct ath10k_hw_regs qca6174_regs;
+
+#define QCA_REV_988X(ar) ((ar)->hw_rev == ATH10K_HW_QCA988X)
+#define QCA_REV_6174(ar) ((ar)->hw_rev == ATH10K_HW_QCA6174)
+
+/* Known pecularities:
+ * - current FW doesn't support raw rx mode (last tested v599)
+ * - current FW dumps upon raw tx mode (last tested v599)
+ * - raw appears in nwifi decap, raw and nwifi appear in ethernet decap
+ * - raw have FCS, nwifi doesn't
+ * - ethernet frames have 802.11 header decapped and parts (base hdr, cipher
+ * param, llc/snap) are aligned to 4byte boundaries each */
+enum ath10k_hw_txrx_mode {
+ ATH10K_HW_TXRX_RAW = 0,
+ ATH10K_HW_TXRX_NATIVE_WIFI = 1,
+ ATH10K_HW_TXRX_ETHERNET = 2,
+
+ /* Valid for HTT >= 3.0. Used for management frames in TX_FRM. */
+ ATH10K_HW_TXRX_MGMT = 3,
+};
+
+enum ath10k_mcast2ucast_mode {
+ ATH10K_MCAST2UCAST_DISABLED = 0,
+ ATH10K_MCAST2UCAST_ENABLED = 1,
+};
+
+struct ath10k_pktlog_hdr {
+ __le16 flags;
+ __le16 missed_cnt;
+ __le16 log_type;
+ __le16 size;
+ __le32 timestamp;
+ u8 payload[0];
+} __packed;
+
+/* Target specific defines for MAIN firmware */
+#define TARGET_NUM_VDEVS 8
+#define TARGET_NUM_PEER_AST 2
+#define TARGET_NUM_WDS_ENTRIES 32
+#define TARGET_DMA_BURST_SIZE 0
+#define TARGET_MAC_AGGR_DELIM 0
+#define TARGET_AST_SKID_LIMIT 16
+#define TARGET_NUM_STATIONS 16
+#define TARGET_NUM_PEERS ((TARGET_NUM_STATIONS) + \
+ (TARGET_NUM_VDEVS))
+#define TARGET_NUM_OFFLOAD_PEERS 0
+#define TARGET_NUM_OFFLOAD_REORDER_BUFS 0
+#define TARGET_NUM_PEER_KEYS 2
+#define TARGET_NUM_TIDS ((TARGET_NUM_PEERS) * 2)
+#define TARGET_TX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2))
+#define TARGET_RX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2))
+#define TARGET_RX_TIMEOUT_LO_PRI 100
+#define TARGET_RX_TIMEOUT_HI_PRI 40
+
+/* Native Wifi decap mode is used to align IP frames to 4-byte boundaries and
+ * avoid a very expensive re-alignment in mac80211. */
+#define TARGET_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI
+
+#define TARGET_SCAN_MAX_PENDING_REQS 4
+#define TARGET_BMISS_OFFLOAD_MAX_VDEV 3
+#define TARGET_ROAM_OFFLOAD_MAX_VDEV 3
+#define TARGET_ROAM_OFFLOAD_MAX_AP_PROFILES 8
+#define TARGET_GTK_OFFLOAD_MAX_VDEV 3
+#define TARGET_NUM_MCAST_GROUPS 0
+#define TARGET_NUM_MCAST_TABLE_ELEMS 0
+#define TARGET_MCAST2UCAST_MODE ATH10K_MCAST2UCAST_DISABLED
+#define TARGET_TX_DBG_LOG_SIZE 1024
+#define TARGET_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 0
+#define TARGET_VOW_CONFIG 0
+#define TARGET_NUM_MSDU_DESC (1024 + 400)
+#define TARGET_MAX_FRAG_ENTRIES 0
+
+/* Target specific defines for 10.X firmware */
+#define TARGET_10X_NUM_VDEVS 16
+#define TARGET_10X_NUM_PEER_AST 2
+#define TARGET_10X_NUM_WDS_ENTRIES 32
+#define TARGET_10X_DMA_BURST_SIZE 0
+#define TARGET_10X_MAC_AGGR_DELIM 0
+#define TARGET_10X_AST_SKID_LIMIT 16
+#define TARGET_10X_NUM_STATIONS 128
+#define TARGET_10X_NUM_PEERS ((TARGET_10X_NUM_STATIONS) + \
+ (TARGET_10X_NUM_VDEVS))
+#define TARGET_10X_NUM_OFFLOAD_PEERS 0
+#define TARGET_10X_NUM_OFFLOAD_REORDER_BUFS 0
+#define TARGET_10X_NUM_PEER_KEYS 2
+#define TARGET_10X_NUM_TIDS_MAX 256
+#define TARGET_10X_NUM_TIDS min((TARGET_10X_NUM_TIDS_MAX), \
+ (TARGET_10X_NUM_PEERS) * 2)
+#define TARGET_10X_TX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2))
+#define TARGET_10X_RX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2))
+#define TARGET_10X_RX_TIMEOUT_LO_PRI 100
+#define TARGET_10X_RX_TIMEOUT_HI_PRI 40
+#define TARGET_10X_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI
+#define TARGET_10X_SCAN_MAX_PENDING_REQS 4
+#define TARGET_10X_BMISS_OFFLOAD_MAX_VDEV 2
+#define TARGET_10X_ROAM_OFFLOAD_MAX_VDEV 2
+#define TARGET_10X_ROAM_OFFLOAD_MAX_AP_PROFILES 8
+#define TARGET_10X_GTK_OFFLOAD_MAX_VDEV 3
+#define TARGET_10X_NUM_MCAST_GROUPS 0
+#define TARGET_10X_NUM_MCAST_TABLE_ELEMS 0
+#define TARGET_10X_MCAST2UCAST_MODE ATH10K_MCAST2UCAST_DISABLED
+#define TARGET_10X_TX_DBG_LOG_SIZE 1024
+#define TARGET_10X_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1
+#define TARGET_10X_VOW_CONFIG 0
+#define TARGET_10X_NUM_MSDU_DESC (1024 + 400)
+#define TARGET_10X_MAX_FRAG_ENTRIES 0
+
+/* 10.2 parameters */
+#define TARGET_10_2_DMA_BURST_SIZE 1
+
+/* Target specific defines for WMI-TLV firmware */
+#define TARGET_TLV_NUM_VDEVS 3
+#define TARGET_TLV_NUM_STATIONS 32
+#define TARGET_TLV_NUM_PEERS ((TARGET_TLV_NUM_STATIONS) + \
+ (TARGET_TLV_NUM_VDEVS) + \
+ 2)
+#define TARGET_TLV_NUM_TIDS ((TARGET_TLV_NUM_PEERS) * 2)
+#define TARGET_TLV_NUM_MSDU_DESC (1024 + 32)
+
+/* Number of Copy Engines supported */
+#define CE_COUNT 8
+
+/*
+ * Total number of PCIe MSI interrupts requested for all interrupt sources.
+ * PCIe standard forces this to be a power of 2.
+ * Some Host OS's limit MSI requests that can be granted to 8
+ * so for now we abide by this limit and avoid requesting more
+ * than that.
+ */
+#define MSI_NUM_REQUEST_LOG2 3
+#define MSI_NUM_REQUEST (1<<MSI_NUM_REQUEST_LOG2)
+
+/*
+ * Granted MSIs are assigned as follows:
+ * Firmware uses the first
+ * Remaining MSIs, if any, are used by Copy Engines
+ * This mapping is known to both Target firmware and Host software.
+ * It may be changed as long as Host and Target are kept in sync.
+ */
+/* MSI for firmware (errors, etc.) */
+#define MSI_ASSIGN_FW 0
+
+/* MSIs for Copy Engines */
+#define MSI_ASSIGN_CE_INITIAL 1
+#define MSI_ASSIGN_CE_MAX 7
+
+/* as of IP3.7.1 */
+#define RTC_STATE_V_ON 3
+
+#define RTC_STATE_COLD_RESET_MASK ar->regs->rtc_state_cold_reset_mask
+#define RTC_STATE_V_LSB 0
+#define RTC_STATE_V_MASK 0x00000007
+#define RTC_STATE_ADDRESS 0x0000
+#define PCIE_SOC_WAKE_V_MASK 0x00000001
+#define PCIE_SOC_WAKE_ADDRESS 0x0004
+#define PCIE_SOC_WAKE_RESET 0x00000000
+#define SOC_GLOBAL_RESET_ADDRESS 0x0008
+
+#define RTC_SOC_BASE_ADDRESS ar->regs->rtc_soc_base_address
+#define RTC_WMAC_BASE_ADDRESS ar->regs->rtc_wmac_base_address
+#define MAC_COEX_BASE_ADDRESS 0x00006000
+#define BT_COEX_BASE_ADDRESS 0x00007000
+#define SOC_PCIE_BASE_ADDRESS 0x00008000
+#define SOC_CORE_BASE_ADDRESS ar->regs->soc_core_base_address
+#define WLAN_UART_BASE_ADDRESS 0x0000c000
+#define WLAN_SI_BASE_ADDRESS 0x00010000
+#define WLAN_GPIO_BASE_ADDRESS 0x00014000
+#define WLAN_ANALOG_INTF_BASE_ADDRESS 0x0001c000
+#define WLAN_MAC_BASE_ADDRESS 0x00020000
+#define EFUSE_BASE_ADDRESS 0x00030000
+#define FPGA_REG_BASE_ADDRESS 0x00039000
+#define WLAN_UART2_BASE_ADDRESS 0x00054c00
+#define CE_WRAPPER_BASE_ADDRESS ar->regs->ce_wrapper_base_address
+#define CE0_BASE_ADDRESS ar->regs->ce0_base_address
+#define CE1_BASE_ADDRESS ar->regs->ce1_base_address
+#define CE2_BASE_ADDRESS ar->regs->ce2_base_address
+#define CE3_BASE_ADDRESS ar->regs->ce3_base_address
+#define CE4_BASE_ADDRESS ar->regs->ce4_base_address
+#define CE5_BASE_ADDRESS ar->regs->ce5_base_address
+#define CE6_BASE_ADDRESS ar->regs->ce6_base_address
+#define CE7_BASE_ADDRESS ar->regs->ce7_base_address
+#define DBI_BASE_ADDRESS 0x00060000
+#define WLAN_ANALOG_INTF_PCIE_BASE_ADDRESS 0x0006c000
+#define PCIE_LOCAL_BASE_ADDRESS 0x00080000
+
+#define SOC_RESET_CONTROL_ADDRESS 0x00000000
+#define SOC_RESET_CONTROL_OFFSET 0x00000000
+#define SOC_RESET_CONTROL_SI0_RST_MASK ar->regs->soc_reset_control_si0_rst_mask
+#define SOC_RESET_CONTROL_CE_RST_MASK ar->regs->soc_reset_control_ce_rst_mask
+#define SOC_RESET_CONTROL_CPU_WARM_RST_MASK 0x00000040
+#define SOC_CPU_CLOCK_OFFSET 0x00000020
+#define SOC_CPU_CLOCK_STANDARD_LSB 0
+#define SOC_CPU_CLOCK_STANDARD_MASK 0x00000003
+#define SOC_CLOCK_CONTROL_OFFSET 0x00000028
+#define SOC_CLOCK_CONTROL_SI0_CLK_MASK 0x00000001
+#define SOC_SYSTEM_SLEEP_OFFSET 0x000000c4
+#define SOC_LPO_CAL_OFFSET 0x000000e0
+#define SOC_LPO_CAL_ENABLE_LSB 20
+#define SOC_LPO_CAL_ENABLE_MASK 0x00100000
+#define SOC_LF_TIMER_CONTROL0_ADDRESS 0x00000050
+#define SOC_LF_TIMER_CONTROL0_ENABLE_MASK 0x00000004
+
+#define SOC_CHIP_ID_ADDRESS ar->regs->soc_chip_id_address
+#define SOC_CHIP_ID_REV_LSB 8
+#define SOC_CHIP_ID_REV_MASK 0x00000f00
+
+#define WLAN_RESET_CONTROL_COLD_RST_MASK 0x00000008
+#define WLAN_RESET_CONTROL_WARM_RST_MASK 0x00000004
+#define WLAN_SYSTEM_SLEEP_DISABLE_LSB 0
+#define WLAN_SYSTEM_SLEEP_DISABLE_MASK 0x00000001
+
+#define WLAN_GPIO_PIN0_ADDRESS 0x00000028
+#define WLAN_GPIO_PIN0_CONFIG_MASK 0x00007800
+#define WLAN_GPIO_PIN1_ADDRESS 0x0000002c
+#define WLAN_GPIO_PIN1_CONFIG_MASK 0x00007800
+#define WLAN_GPIO_PIN10_ADDRESS 0x00000050
+#define WLAN_GPIO_PIN11_ADDRESS 0x00000054
+#define WLAN_GPIO_PIN12_ADDRESS 0x00000058
+#define WLAN_GPIO_PIN13_ADDRESS 0x0000005c
+
+#define CLOCK_GPIO_OFFSET 0xffffffff
+#define CLOCK_GPIO_BT_CLK_OUT_EN_LSB 0
+#define CLOCK_GPIO_BT_CLK_OUT_EN_MASK 0
+
+#define SI_CONFIG_OFFSET 0x00000000
+#define SI_CONFIG_BIDIR_OD_DATA_LSB 18
+#define SI_CONFIG_BIDIR_OD_DATA_MASK 0x00040000
+#define SI_CONFIG_I2C_LSB 16
+#define SI_CONFIG_I2C_MASK 0x00010000
+#define SI_CONFIG_POS_SAMPLE_LSB 7
+#define SI_CONFIG_POS_SAMPLE_MASK 0x00000080
+#define SI_CONFIG_INACTIVE_DATA_LSB 5
+#define SI_CONFIG_INACTIVE_DATA_MASK 0x00000020
+#define SI_CONFIG_INACTIVE_CLK_LSB 4
+#define SI_CONFIG_INACTIVE_CLK_MASK 0x00000010
+#define SI_CONFIG_DIVIDER_LSB 0
+#define SI_CONFIG_DIVIDER_MASK 0x0000000f
+#define SI_CS_OFFSET 0x00000004
+#define SI_CS_DONE_ERR_MASK 0x00000400
+#define SI_CS_DONE_INT_MASK 0x00000200
+#define SI_CS_START_LSB 8
+#define SI_CS_START_MASK 0x00000100
+#define SI_CS_RX_CNT_LSB 4
+#define SI_CS_RX_CNT_MASK 0x000000f0
+#define SI_CS_TX_CNT_LSB 0
+#define SI_CS_TX_CNT_MASK 0x0000000f
+
+#define SI_TX_DATA0_OFFSET 0x00000008
+#define SI_TX_DATA1_OFFSET 0x0000000c
+#define SI_RX_DATA0_OFFSET 0x00000010
+#define SI_RX_DATA1_OFFSET 0x00000014
+
+#define CORE_CTRL_CPU_INTR_MASK 0x00002000
+#define CORE_CTRL_PCIE_REG_31_MASK 0x00000800
+#define CORE_CTRL_ADDRESS 0x0000
+#define PCIE_INTR_ENABLE_ADDRESS 0x0008
+#define PCIE_INTR_CAUSE_ADDRESS 0x000c
+#define PCIE_INTR_CLR_ADDRESS 0x0014
+#define SCRATCH_3_ADDRESS ar->regs->scratch_3_address
+#define CPU_INTR_ADDRESS 0x0010
+
+/* Firmware indications to the Host via SCRATCH_3 register. */
+#define FW_INDICATOR_ADDRESS (SOC_CORE_BASE_ADDRESS + SCRATCH_3_ADDRESS)
+#define FW_IND_EVENT_PENDING 1
+#define FW_IND_INITIALIZED 2
+
+/* HOST_REG interrupt from firmware */
+#define PCIE_INTR_FIRMWARE_MASK 0x00000400
+#define PCIE_INTR_CE_MASK_ALL 0x0007f800
+
+#define DRAM_BASE_ADDRESS 0x00400000
+
+#define MISSING 0
+
+#define SYSTEM_SLEEP_OFFSET SOC_SYSTEM_SLEEP_OFFSET
+#define WLAN_SYSTEM_SLEEP_OFFSET SOC_SYSTEM_SLEEP_OFFSET
+#define WLAN_RESET_CONTROL_OFFSET SOC_RESET_CONTROL_OFFSET
+#define CLOCK_CONTROL_OFFSET SOC_CLOCK_CONTROL_OFFSET
+#define CLOCK_CONTROL_SI0_CLK_MASK SOC_CLOCK_CONTROL_SI0_CLK_MASK
+#define RESET_CONTROL_MBOX_RST_MASK MISSING
+#define RESET_CONTROL_SI0_RST_MASK SOC_RESET_CONTROL_SI0_RST_MASK
+#define GPIO_BASE_ADDRESS WLAN_GPIO_BASE_ADDRESS
+#define GPIO_PIN0_OFFSET WLAN_GPIO_PIN0_ADDRESS
+#define GPIO_PIN1_OFFSET WLAN_GPIO_PIN1_ADDRESS
+#define GPIO_PIN0_CONFIG_MASK WLAN_GPIO_PIN0_CONFIG_MASK
+#define GPIO_PIN1_CONFIG_MASK WLAN_GPIO_PIN1_CONFIG_MASK
+#define SI_BASE_ADDRESS WLAN_SI_BASE_ADDRESS
+#define SCRATCH_BASE_ADDRESS SOC_CORE_BASE_ADDRESS
+#define LOCAL_SCRATCH_OFFSET 0x18
+#define CPU_CLOCK_OFFSET SOC_CPU_CLOCK_OFFSET
+#define LPO_CAL_OFFSET SOC_LPO_CAL_OFFSET
+#define GPIO_PIN10_OFFSET WLAN_GPIO_PIN10_ADDRESS
+#define GPIO_PIN11_OFFSET WLAN_GPIO_PIN11_ADDRESS
+#define GPIO_PIN12_OFFSET WLAN_GPIO_PIN12_ADDRESS
+#define GPIO_PIN13_OFFSET WLAN_GPIO_PIN13_ADDRESS
+#define CPU_CLOCK_STANDARD_LSB SOC_CPU_CLOCK_STANDARD_LSB
+#define CPU_CLOCK_STANDARD_MASK SOC_CPU_CLOCK_STANDARD_MASK
+#define LPO_CAL_ENABLE_LSB SOC_LPO_CAL_ENABLE_LSB
+#define LPO_CAL_ENABLE_MASK SOC_LPO_CAL_ENABLE_MASK
+#define ANALOG_INTF_BASE_ADDRESS WLAN_ANALOG_INTF_BASE_ADDRESS
+#define MBOX_BASE_ADDRESS MISSING
+#define INT_STATUS_ENABLE_ERROR_LSB MISSING
+#define INT_STATUS_ENABLE_ERROR_MASK MISSING
+#define INT_STATUS_ENABLE_CPU_LSB MISSING
+#define INT_STATUS_ENABLE_CPU_MASK MISSING
+#define INT_STATUS_ENABLE_COUNTER_LSB MISSING
+#define INT_STATUS_ENABLE_COUNTER_MASK MISSING
+#define INT_STATUS_ENABLE_MBOX_DATA_LSB MISSING
+#define INT_STATUS_ENABLE_MBOX_DATA_MASK MISSING
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB MISSING
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK MISSING
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB MISSING
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK MISSING
+#define COUNTER_INT_STATUS_ENABLE_BIT_LSB MISSING
+#define COUNTER_INT_STATUS_ENABLE_BIT_MASK MISSING
+#define INT_STATUS_ENABLE_ADDRESS MISSING
+#define CPU_INT_STATUS_ENABLE_BIT_LSB MISSING
+#define CPU_INT_STATUS_ENABLE_BIT_MASK MISSING
+#define HOST_INT_STATUS_ADDRESS MISSING
+#define CPU_INT_STATUS_ADDRESS MISSING
+#define ERROR_INT_STATUS_ADDRESS MISSING
+#define ERROR_INT_STATUS_WAKEUP_MASK MISSING
+#define ERROR_INT_STATUS_WAKEUP_LSB MISSING
+#define ERROR_INT_STATUS_RX_UNDERFLOW_MASK MISSING
+#define ERROR_INT_STATUS_RX_UNDERFLOW_LSB MISSING
+#define ERROR_INT_STATUS_TX_OVERFLOW_MASK MISSING
+#define ERROR_INT_STATUS_TX_OVERFLOW_LSB MISSING
+#define COUNT_DEC_ADDRESS MISSING
+#define HOST_INT_STATUS_CPU_MASK MISSING
+#define HOST_INT_STATUS_CPU_LSB MISSING
+#define HOST_INT_STATUS_ERROR_MASK MISSING
+#define HOST_INT_STATUS_ERROR_LSB MISSING
+#define HOST_INT_STATUS_COUNTER_MASK MISSING
+#define HOST_INT_STATUS_COUNTER_LSB MISSING
+#define RX_LOOKAHEAD_VALID_ADDRESS MISSING
+#define WINDOW_DATA_ADDRESS MISSING
+#define WINDOW_READ_ADDR_ADDRESS MISSING
+#define WINDOW_WRITE_ADDR_ADDRESS MISSING
+
+#define RTC_STATE_V_GET(x) (((x) & RTC_STATE_V_MASK) >> RTC_STATE_V_LSB)
+
+#endif /* _HW_H_ */
Code Review / kvmfornfv.git / blobdiff