--- /dev/null
+/*
+ * Moxa C101 synchronous serial card driver for Linux
+ *
+ * Copyright (C) 2000-2003 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>
+ *
+ * Sources of information:
+ * Hitachi HD64570 SCA User's Manual
+ * Moxa C101 User's Manual
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/capability.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
+#include <linux/hdlc.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "hd64570.h"
+
+
+static const char* version = "Moxa C101 driver version: 1.15";
+static const char* devname = "C101";
+
+#undef DEBUG_PKT
+#define DEBUG_RINGS
+
+#define C101_PAGE 0x1D00
+#define C101_DTR 0x1E00
+#define C101_SCA 0x1F00
+#define C101_WINDOW_SIZE 0x2000
+#define C101_MAPPED_RAM_SIZE 0x4000
+
+#define RAM_SIZE (256 * 1024)
+#define TX_RING_BUFFERS 10
+#define RX_RING_BUFFERS ((RAM_SIZE - C101_WINDOW_SIZE) / \
+ (sizeof(pkt_desc) + HDLC_MAX_MRU) - TX_RING_BUFFERS)
+
+#define CLOCK_BASE 9830400 /* 9.8304 MHz */
+#define PAGE0_ALWAYS_MAPPED
+
+static char *hw; /* pointer to hw=xxx command line string */
+
+
+typedef struct card_s {
+ struct net_device *dev;
+ spinlock_t lock; /* TX lock */
+ u8 __iomem *win0base; /* ISA window base address */
+ u32 phy_winbase; /* ISA physical base address */
+ sync_serial_settings settings;
+ int rxpart; /* partial frame received, next frame invalid*/
+ unsigned short encoding;
+ unsigned short parity;
+ u16 rx_ring_buffers; /* number of buffers in a ring */
+ u16 tx_ring_buffers;
+ u16 buff_offset; /* offset of first buffer of first channel */
+ u16 rxin; /* rx ring buffer 'in' pointer */
+ u16 txin; /* tx ring buffer 'in' and 'last' pointers */
+ u16 txlast;
+ u8 rxs, txs, tmc; /* SCA registers */
+ u8 irq; /* IRQ (3-15) */
+ u8 page;
+
+ struct card_s *next_card;
+}card_t;
+
+typedef card_t port_t;
+
+static card_t *first_card;
+static card_t **new_card = &first_card;
+
+
+#define sca_in(reg, card) readb((card)->win0base + C101_SCA + (reg))
+#define sca_out(value, reg, card) writeb(value, (card)->win0base + C101_SCA + (reg))
+#define sca_inw(reg, card) readw((card)->win0base + C101_SCA + (reg))
+
+/* EDA address register must be set in EDAL, EDAH order - 8 bit ISA bus */
+#define sca_outw(value, reg, card) do { \
+ writeb(value & 0xFF, (card)->win0base + C101_SCA + (reg)); \
+ writeb((value >> 8 ) & 0xFF, (card)->win0base + C101_SCA + (reg + 1));\
+} while(0)
+
+#define port_to_card(port) (port)
+#define log_node(port) (0)
+#define phy_node(port) (0)
+#define winsize(card) (C101_WINDOW_SIZE)
+#define win0base(card) ((card)->win0base)
+#define winbase(card) ((card)->win0base + 0x2000)
+#define get_port(card, port) (card)
+static void sca_msci_intr(port_t *port);
+
+
+static inline u8 sca_get_page(card_t *card)
+{
+ return card->page;
+}
+
+static inline void openwin(card_t *card, u8 page)
+{
+ card->page = page;
+ writeb(page, card->win0base + C101_PAGE);
+}
+
+
+#include "hd64570.c"
+
+
+static inline void set_carrier(port_t *port)
+{
+ if (!(sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD))
+ netif_carrier_on(port_to_dev(port));
+ else
+ netif_carrier_off(port_to_dev(port));
+}
+
+
+static void sca_msci_intr(port_t *port)
+{
+ u8 stat = sca_in(MSCI0_OFFSET + ST1, port); /* read MSCI ST1 status */
+
+ /* Reset MSCI TX underrun and CDCD (ignored) status bit */
+ sca_out(stat & (ST1_UDRN | ST1_CDCD), MSCI0_OFFSET + ST1, port);
+
+ if (stat & ST1_UDRN) {
+ /* TX Underrun error detected */
+ port_to_dev(port)->stats.tx_errors++;
+ port_to_dev(port)->stats.tx_fifo_errors++;
+ }
+
+ stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI1 ST1 status */
+ /* Reset MSCI CDCD status bit - uses ch#2 DCD input */
+ sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, port);
+
+ if (stat & ST1_CDCD)
+ set_carrier(port);
+}
+
+
+static void c101_set_iface(port_t *port)
+{
+ u8 rxs = port->rxs & CLK_BRG_MASK;
+ u8 txs = port->txs & CLK_BRG_MASK;
+
+ switch(port->settings.clock_type) {
+ case CLOCK_INT:
+ rxs |= CLK_BRG_RX; /* TX clock */
+ txs |= CLK_RXCLK_TX; /* BRG output */
+ break;
+
+ case CLOCK_TXINT:
+ rxs |= CLK_LINE_RX; /* RXC input */
+ txs |= CLK_BRG_TX; /* BRG output */
+ break;
+
+ case CLOCK_TXFROMRX:
+ rxs |= CLK_LINE_RX; /* RXC input */
+ txs |= CLK_RXCLK_TX; /* RX clock */
+ break;
+
+ default: /* EXTernal clock */
+ rxs |= CLK_LINE_RX; /* RXC input */
+ txs |= CLK_LINE_TX; /* TXC input */
+ }
+
+ port->rxs = rxs;
+ port->txs = txs;
+ sca_out(rxs, MSCI1_OFFSET + RXS, port);
+ sca_out(txs, MSCI1_OFFSET + TXS, port);
+ sca_set_port(port);
+}
+
+
+static int c101_open(struct net_device *dev)
+{
+ port_t *port = dev_to_port(dev);
+ int result;
+
+ result = hdlc_open(dev);
+ if (result)
+ return result;
+
+ writeb(1, port->win0base + C101_DTR);
+ sca_out(0, MSCI1_OFFSET + CTL, port); /* RTS uses ch#2 output */
+ sca_open(dev);
+ /* DCD is connected to port 2 !@#$%^& - disable MSCI0 CDCD interrupt */
+ sca_out(IE1_UDRN, MSCI0_OFFSET + IE1, port);
+ sca_out(IE0_TXINT, MSCI0_OFFSET + IE0, port);
+
+ set_carrier(port);
+
+ /* enable MSCI1 CDCD interrupt */
+ sca_out(IE1_CDCD, MSCI1_OFFSET + IE1, port);
+ sca_out(IE0_RXINTA, MSCI1_OFFSET + IE0, port);
+ sca_out(0x48, IER0, port); /* TXINT #0 and RXINT #1 */
+ c101_set_iface(port);
+ return 0;
+}
+
+
+static int c101_close(struct net_device *dev)
+{
+ port_t *port = dev_to_port(dev);
+
+ sca_close(dev);
+ writeb(0, port->win0base + C101_DTR);
+ sca_out(CTL_NORTS, MSCI1_OFFSET + CTL, port);
+ hdlc_close(dev);
+ return 0;
+}
+
+
+static int c101_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ const size_t size = sizeof(sync_serial_settings);
+ sync_serial_settings new_line;
+ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+ port_t *port = dev_to_port(dev);
+
+#ifdef DEBUG_RINGS
+ if (cmd == SIOCDEVPRIVATE) {
+ sca_dump_rings(dev);
+ printk(KERN_DEBUG "MSCI1: ST: %02x %02x %02x %02x\n",
+ sca_in(MSCI1_OFFSET + ST0, port),
+ sca_in(MSCI1_OFFSET + ST1, port),
+ sca_in(MSCI1_OFFSET + ST2, port),
+ sca_in(MSCI1_OFFSET + ST3, port));
+ return 0;
+ }
+#endif
+ if (cmd != SIOCWANDEV)
+ return hdlc_ioctl(dev, ifr, cmd);
+
+ switch(ifr->ifr_settings.type) {
+ case IF_GET_IFACE:
+ ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
+ if (ifr->ifr_settings.size < size) {
+ ifr->ifr_settings.size = size; /* data size wanted */
+ return -ENOBUFS;
+ }
+ if (copy_to_user(line, &port->settings, size))
+ return -EFAULT;
+ return 0;
+
+ case IF_IFACE_SYNC_SERIAL:
+ if(!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (copy_from_user(&new_line, line, size))
+ return -EFAULT;
+
+ if (new_line.clock_type != CLOCK_EXT &&
+ new_line.clock_type != CLOCK_TXFROMRX &&
+ new_line.clock_type != CLOCK_INT &&
+ new_line.clock_type != CLOCK_TXINT)
+ return -EINVAL; /* No such clock setting */
+
+ if (new_line.loopback != 0 && new_line.loopback != 1)
+ return -EINVAL;
+
+ memcpy(&port->settings, &new_line, size); /* Update settings */
+ c101_set_iface(port);
+ return 0;
+
+ default:
+ return hdlc_ioctl(dev, ifr, cmd);
+ }
+}
+
+
+
+static void c101_destroy_card(card_t *card)
+{
+ readb(card->win0base + C101_PAGE); /* Resets SCA? */
+
+ if (card->irq)
+ free_irq(card->irq, card);
+
+ if (card->win0base) {
+ iounmap(card->win0base);
+ release_mem_region(card->phy_winbase, C101_MAPPED_RAM_SIZE);
+ }
+
+ free_netdev(card->dev);
+
+ kfree(card);
+}
+
+static const struct net_device_ops c101_ops = {
+ .ndo_open = c101_open,
+ .ndo_stop = c101_close,
+ .ndo_change_mtu = hdlc_change_mtu,
+ .ndo_start_xmit = hdlc_start_xmit,
+ .ndo_do_ioctl = c101_ioctl,
+};
+
+static int __init c101_run(unsigned long irq, unsigned long winbase)
+{
+ struct net_device *dev;
+ hdlc_device *hdlc;
+ card_t *card;
+ int result;
+
+ if (irq<3 || irq>15 || irq == 6) /* FIXME */ {
+ pr_err("invalid IRQ value\n");
+ return -ENODEV;
+ }
+
+ if (winbase < 0xC0000 || winbase > 0xDFFFF || (winbase & 0x3FFF) !=0) {
+ pr_err("invalid RAM value\n");
+ return -ENODEV;
+ }
+
+ card = kzalloc(sizeof(card_t), GFP_KERNEL);
+ if (card == NULL)
+ return -ENOBUFS;
+
+ card->dev = alloc_hdlcdev(card);
+ if (!card->dev) {
+ pr_err("unable to allocate memory\n");
+ kfree(card);
+ return -ENOBUFS;
+ }
+
+ if (request_irq(irq, sca_intr, 0, devname, card)) {
+ pr_err("could not allocate IRQ\n");
+ c101_destroy_card(card);
+ return -EBUSY;
+ }
+ card->irq = irq;
+
+ if (!request_mem_region(winbase, C101_MAPPED_RAM_SIZE, devname)) {
+ pr_err("could not request RAM window\n");
+ c101_destroy_card(card);
+ return -EBUSY;
+ }
+ card->phy_winbase = winbase;
+ card->win0base = ioremap(winbase, C101_MAPPED_RAM_SIZE);
+ if (!card->win0base) {
+ pr_err("could not map I/O address\n");
+ c101_destroy_card(card);
+ return -EFAULT;
+ }
+
+ card->tx_ring_buffers = TX_RING_BUFFERS;
+ card->rx_ring_buffers = RX_RING_BUFFERS;
+ card->buff_offset = C101_WINDOW_SIZE; /* Bytes 1D00-1FFF reserved */
+
+ readb(card->win0base + C101_PAGE); /* Resets SCA? */
+ udelay(100);
+ writeb(0, card->win0base + C101_PAGE);
+ writeb(0, card->win0base + C101_DTR); /* Power-up for RAM? */
+
+ sca_init(card, 0);
+
+ dev = port_to_dev(card);
+ hdlc = dev_to_hdlc(dev);
+
+ spin_lock_init(&card->lock);
+ dev->irq = irq;
+ dev->mem_start = winbase;
+ dev->mem_end = winbase + C101_MAPPED_RAM_SIZE - 1;
+ dev->tx_queue_len = 50;
+ dev->netdev_ops = &c101_ops;
+ hdlc->attach = sca_attach;
+ hdlc->xmit = sca_xmit;
+ card->settings.clock_type = CLOCK_EXT;
+
+ result = register_hdlc_device(dev);
+ if (result) {
+ pr_warn("unable to register hdlc device\n");
+ c101_destroy_card(card);
+ return result;
+ }
+
+ sca_init_port(card); /* Set up C101 memory */
+ set_carrier(card);
+
+ netdev_info(dev, "Moxa C101 on IRQ%u, using %u TX + %u RX packets rings\n",
+ card->irq, card->tx_ring_buffers, card->rx_ring_buffers);
+
+ *new_card = card;
+ new_card = &card->next_card;
+ return 0;
+}
+
+
+
+static int __init c101_init(void)
+{
+ if (hw == NULL) {
+#ifdef MODULE
+ pr_info("no card initialized\n");
+#endif
+ return -EINVAL; /* no parameters specified, abort */
+ }
+
+ pr_info("%s\n", version);
+
+ do {
+ unsigned long irq, ram;
+
+ irq = simple_strtoul(hw, &hw, 0);
+
+ if (*hw++ != ',')
+ break;
+ ram = simple_strtoul(hw, &hw, 0);
+
+ if (*hw == ':' || *hw == '\x0')
+ c101_run(irq, ram);
+
+ if (*hw == '\x0')
+ return first_card ? 0 : -EINVAL;
+ }while(*hw++ == ':');
+
+ pr_err("invalid hardware parameters\n");
+ return first_card ? 0 : -EINVAL;
+}
+
+
+static void __exit c101_cleanup(void)
+{
+ card_t *card = first_card;
+
+ while (card) {
+ card_t *ptr = card;
+ card = card->next_card;
+ unregister_hdlc_device(port_to_dev(ptr));
+ c101_destroy_card(ptr);
+ }
+}
+
+
+module_init(c101_init);
+module_exit(c101_cleanup);
+
+MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
+MODULE_DESCRIPTION("Moxa C101 serial port driver");
+MODULE_LICENSE("GPL v2");
+module_param(hw, charp, 0444);
+MODULE_PARM_DESC(hw, "irq,ram:irq,...");
Code Review / kvmfornfv.git / blobdiff