Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / usb / hso.c
diff --git a/kernel/drivers/net/usb/hso.c b/kernel/drivers/net/usb/hso.c
new file mode 100644 (file)
index 0000000..111d907
--- /dev/null
@@ -0,0 +1,3323 @@
+/******************************************************************************
+ *
+ * Driver for Option High Speed Mobile Devices.
+ *
+ *  Copyright (C) 2008 Option International
+ *                     Filip Aben <f.aben@option.com>
+ *                     Denis Joseph Barrow <d.barow@option.com>
+ *                     Jan Dumon <j.dumon@option.com>
+ *  Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd)
+ *                     <ajb@spheresystems.co.uk>
+ *  Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
+ *  Copyright (C) 2008 Novell, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ *  USA
+ *
+ *
+ *****************************************************************************/
+
+/******************************************************************************
+ *
+ * Description of the device:
+ *
+ * Interface 0:        Contains the IP network interface on the bulk end points.
+ *             The multiplexed serial ports are using the interrupt and
+ *             control endpoints.
+ *             Interrupt contains a bitmap telling which multiplexed
+ *             serialport needs servicing.
+ *
+ * Interface 1:        Diagnostics port, uses bulk only, do not submit urbs until the
+ *             port is opened, as this have a huge impact on the network port
+ *             throughput.
+ *
+ * Interface 2:        Standard modem interface - circuit switched interface, this
+ *             can be used to make a standard ppp connection however it
+ *              should not be used in conjunction with the IP network interface
+ *              enabled for USB performance reasons i.e. if using this set
+ *              ideally disable_net=1.
+ *
+ *****************************************************************************/
+
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/module.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/kmod.h>
+#include <linux/rfkill.h>
+#include <linux/ip.h>
+#include <linux/uaccess.h>
+#include <linux/usb/cdc.h>
+#include <net/arp.h>
+#include <asm/byteorder.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+
+#define MOD_AUTHOR                     "Option Wireless"
+#define MOD_DESCRIPTION                        "USB High Speed Option driver"
+#define MOD_LICENSE                    "GPL"
+
+#define HSO_MAX_NET_DEVICES            10
+#define HSO__MAX_MTU                   2048
+#define DEFAULT_MTU                    1500
+#define DEFAULT_MRU                    1500
+
+#define CTRL_URB_RX_SIZE               1024
+#define CTRL_URB_TX_SIZE               64
+
+#define BULK_URB_RX_SIZE               4096
+#define BULK_URB_TX_SIZE               8192
+
+#define MUX_BULK_RX_BUF_SIZE           HSO__MAX_MTU
+#define MUX_BULK_TX_BUF_SIZE           HSO__MAX_MTU
+#define MUX_BULK_RX_BUF_COUNT          4
+#define USB_TYPE_OPTION_VENDOR         0x20
+
+/* These definitions are used with the struct hso_net flags element */
+/* - use *_bit operations on it. (bit indices not values.) */
+#define HSO_NET_RUNNING                        0
+
+#define        HSO_NET_TX_TIMEOUT              (HZ*10)
+
+#define HSO_SERIAL_MAGIC               0x48534f31
+
+/* Number of ttys to handle */
+#define HSO_SERIAL_TTY_MINORS          256
+
+#define MAX_RX_URBS                    2
+
+/*****************************************************************************/
+/* Debugging functions                                                       */
+/*****************************************************************************/
+#define D__(lvl_, fmt, arg...)                         \
+       do {                                            \
+               printk(lvl_ "[%d:%s]: " fmt "\n",       \
+                      __LINE__, __func__, ## arg);     \
+       } while (0)
+
+#define D_(lvl, args...)                               \
+       do {                                            \
+               if (lvl & debug)                        \
+                       D__(KERN_INFO, args);           \
+       } while (0)
+
+#define D1(args...)    D_(0x01, ##args)
+#define D2(args...)    D_(0x02, ##args)
+#define D3(args...)    D_(0x04, ##args)
+#define D4(args...)    D_(0x08, ##args)
+#define D5(args...)    D_(0x10, ##args)
+
+/*****************************************************************************/
+/* Enumerators                                                               */
+/*****************************************************************************/
+enum pkt_parse_state {
+       WAIT_IP,
+       WAIT_DATA,
+       WAIT_SYNC
+};
+
+/*****************************************************************************/
+/* Structs                                                                   */
+/*****************************************************************************/
+
+struct hso_shared_int {
+       struct usb_endpoint_descriptor *intr_endp;
+       void *shared_intr_buf;
+       struct urb *shared_intr_urb;
+       struct usb_device *usb;
+       int use_count;
+       int ref_count;
+       struct mutex shared_int_lock;
+};
+
+struct hso_net {
+       struct hso_device *parent;
+       struct net_device *net;
+       struct rfkill *rfkill;
+       char name[24];
+
+       struct usb_endpoint_descriptor *in_endp;
+       struct usb_endpoint_descriptor *out_endp;
+
+       struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT];
+       struct urb *mux_bulk_tx_urb;
+       void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT];
+       void *mux_bulk_tx_buf;
+
+       struct sk_buff *skb_rx_buf;
+       struct sk_buff *skb_tx_buf;
+
+       enum pkt_parse_state rx_parse_state;
+       spinlock_t net_lock;
+
+       unsigned short rx_buf_size;
+       unsigned short rx_buf_missing;
+       struct iphdr rx_ip_hdr;
+
+       unsigned long flags;
+};
+
+enum rx_ctrl_state{
+       RX_IDLE,
+       RX_SENT,
+       RX_PENDING
+};
+
+#define BM_REQUEST_TYPE (0xa1)
+#define B_NOTIFICATION  (0x20)
+#define W_VALUE         (0x0)
+#define W_LENGTH        (0x2)
+
+#define B_OVERRUN       (0x1<<6)
+#define B_PARITY        (0x1<<5)
+#define B_FRAMING       (0x1<<4)
+#define B_RING_SIGNAL   (0x1<<3)
+#define B_BREAK         (0x1<<2)
+#define B_TX_CARRIER    (0x1<<1)
+#define B_RX_CARRIER    (0x1<<0)
+
+struct hso_serial_state_notification {
+       u8 bmRequestType;
+       u8 bNotification;
+       u16 wValue;
+       u16 wIndex;
+       u16 wLength;
+       u16 UART_state_bitmap;
+} __packed;
+
+struct hso_tiocmget {
+       struct mutex mutex;
+       wait_queue_head_t waitq;
+       int    intr_completed;
+       struct usb_endpoint_descriptor *endp;
+       struct urb *urb;
+       struct hso_serial_state_notification serial_state_notification;
+       u16    prev_UART_state_bitmap;
+       struct uart_icount icount;
+};
+
+
+struct hso_serial {
+       struct hso_device *parent;
+       int magic;
+       u8 minor;
+
+       struct hso_shared_int *shared_int;
+
+       /* rx/tx urb could be either a bulk urb or a control urb depending
+          on which serial port it is used on. */
+       struct urb *rx_urb[MAX_RX_URBS];
+       u8 num_rx_urbs;
+       u8 *rx_data[MAX_RX_URBS];
+       u16 rx_data_length;     /* should contain allocated length */
+
+       struct urb *tx_urb;
+       u8 *tx_data;
+       u8 *tx_buffer;
+       u16 tx_data_length;     /* should contain allocated length */
+       u16 tx_data_count;
+       u16 tx_buffer_count;
+       struct usb_ctrlrequest ctrl_req_tx;
+       struct usb_ctrlrequest ctrl_req_rx;
+
+       struct usb_endpoint_descriptor *in_endp;
+       struct usb_endpoint_descriptor *out_endp;
+
+       enum rx_ctrl_state rx_state;
+       u8 rts_state;
+       u8 dtr_state;
+       unsigned tx_urb_used:1;
+
+       struct tty_port port;
+       /* from usb_serial_port */
+       spinlock_t serial_lock;
+
+       int (*write_data) (struct hso_serial *serial);
+       struct hso_tiocmget  *tiocmget;
+       /* Hacks required to get flow control
+        * working on the serial receive buffers
+        * so as not to drop characters on the floor.
+        */
+       int  curr_rx_urb_idx;
+       u8   rx_urb_filled[MAX_RX_URBS];
+       struct tasklet_struct unthrottle_tasklet;
+};
+
+struct hso_device {
+       union {
+               struct hso_serial *dev_serial;
+               struct hso_net *dev_net;
+       } port_data;
+
+       u32 port_spec;
+
+       u8 is_active;
+       u8 usb_gone;
+       struct work_struct async_get_intf;
+       struct work_struct async_put_intf;
+
+       struct usb_device *usb;
+       struct usb_interface *interface;
+
+       struct device *dev;
+       struct kref ref;
+       struct mutex mutex;
+};
+
+/* Type of interface */
+#define HSO_INTF_MASK          0xFF00
+#define        HSO_INTF_MUX            0x0100
+#define        HSO_INTF_BULK           0x0200
+
+/* Type of port */
+#define HSO_PORT_MASK          0xFF
+#define HSO_PORT_NO_PORT       0x0
+#define        HSO_PORT_CONTROL        0x1
+#define        HSO_PORT_APP            0x2
+#define        HSO_PORT_GPS            0x3
+#define        HSO_PORT_PCSC           0x4
+#define        HSO_PORT_APP2           0x5
+#define HSO_PORT_GPS_CONTROL   0x6
+#define HSO_PORT_MSD           0x7
+#define HSO_PORT_VOICE         0x8
+#define HSO_PORT_DIAG2         0x9
+#define        HSO_PORT_DIAG           0x10
+#define        HSO_PORT_MODEM          0x11
+#define        HSO_PORT_NETWORK        0x12
+
+/* Additional device info */
+#define HSO_INFO_MASK          0xFF000000
+#define HSO_INFO_CRC_BUG       0x01000000
+
+/*****************************************************************************/
+/* Prototypes                                                                */
+/*****************************************************************************/
+/* Serial driver functions */
+static int hso_serial_tiocmset(struct tty_struct *tty,
+                              unsigned int set, unsigned int clear);
+static void ctrl_callback(struct urb *urb);
+static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
+static void hso_kick_transmit(struct hso_serial *serial);
+/* Helper functions */
+static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
+                                  struct usb_device *usb, gfp_t gfp);
+static void handle_usb_error(int status, const char *function,
+                            struct hso_device *hso_dev);
+static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
+                                                 int type, int dir);
+static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
+static void hso_free_interface(struct usb_interface *intf);
+static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags);
+static int hso_stop_serial_device(struct hso_device *hso_dev);
+static int hso_start_net_device(struct hso_device *hso_dev);
+static void hso_free_shared_int(struct hso_shared_int *shared_int);
+static int hso_stop_net_device(struct hso_device *hso_dev);
+static void hso_serial_ref_free(struct kref *ref);
+static void hso_std_serial_read_bulk_callback(struct urb *urb);
+static int hso_mux_serial_read(struct hso_serial *serial);
+static void async_get_intf(struct work_struct *data);
+static void async_put_intf(struct work_struct *data);
+static int hso_put_activity(struct hso_device *hso_dev);
+static int hso_get_activity(struct hso_device *hso_dev);
+static void tiocmget_intr_callback(struct urb *urb);
+/*****************************************************************************/
+/* Helping functions                                                         */
+/*****************************************************************************/
+
+/* #define DEBUG */
+
+static inline struct hso_net *dev2net(struct hso_device *hso_dev)
+{
+       return hso_dev->port_data.dev_net;
+}
+
+static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
+{
+       return hso_dev->port_data.dev_serial;
+}
+
+/* Debugging functions */
+#ifdef DEBUG
+static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
+                    unsigned int len)
+{
+       static char name[255];
+
+       sprintf(name, "hso[%d:%s]", line_count, func_name);
+       print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
+}
+
+#define DUMP(buf_, len_)       \
+       dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
+
+#define DUMP1(buf_, len_)                      \
+       do {                                    \
+               if (0x01 & debug)               \
+                       DUMP(buf_, len_);       \
+       } while (0)
+#else
+#define DUMP(buf_, len_)
+#define DUMP1(buf_, len_)
+#endif
+
+/* module parameters */
+static int debug;
+static int tty_major;
+static int disable_net;
+
+/* driver info */
+static const char driver_name[] = "hso";
+static const char tty_filename[] = "ttyHS";
+static const char *version = __FILE__ ": " MOD_AUTHOR;
+/* the usb driver itself (registered in hso_init) */
+static struct usb_driver hso_driver;
+/* serial structures */
+static struct tty_driver *tty_drv;
+static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS];
+static struct hso_device *network_table[HSO_MAX_NET_DEVICES];
+static spinlock_t serial_table_lock;
+
+static const s32 default_port_spec[] = {
+       HSO_INTF_MUX | HSO_PORT_NETWORK,
+       HSO_INTF_BULK | HSO_PORT_DIAG,
+       HSO_INTF_BULK | HSO_PORT_MODEM,
+       0
+};
+
+static const s32 icon321_port_spec[] = {
+       HSO_INTF_MUX | HSO_PORT_NETWORK,
+       HSO_INTF_BULK | HSO_PORT_DIAG2,
+       HSO_INTF_BULK | HSO_PORT_MODEM,
+       HSO_INTF_BULK | HSO_PORT_DIAG,
+       0
+};
+
+#define default_port_device(vendor, product)   \
+       USB_DEVICE(vendor, product),    \
+               .driver_info = (kernel_ulong_t)default_port_spec
+
+#define icon321_port_device(vendor, product)   \
+       USB_DEVICE(vendor, product),    \
+               .driver_info = (kernel_ulong_t)icon321_port_spec
+
+/* list of devices we support */
+static const struct usb_device_id hso_ids[] = {
+       {default_port_device(0x0af0, 0x6711)},
+       {default_port_device(0x0af0, 0x6731)},
+       {default_port_device(0x0af0, 0x6751)},
+       {default_port_device(0x0af0, 0x6771)},
+       {default_port_device(0x0af0, 0x6791)},
+       {default_port_device(0x0af0, 0x6811)},
+       {default_port_device(0x0af0, 0x6911)},
+       {default_port_device(0x0af0, 0x6951)},
+       {default_port_device(0x0af0, 0x6971)},
+       {default_port_device(0x0af0, 0x7011)},
+       {default_port_device(0x0af0, 0x7031)},
+       {default_port_device(0x0af0, 0x7051)},
+       {default_port_device(0x0af0, 0x7071)},
+       {default_port_device(0x0af0, 0x7111)},
+       {default_port_device(0x0af0, 0x7211)},
+       {default_port_device(0x0af0, 0x7251)},
+       {default_port_device(0x0af0, 0x7271)},
+       {default_port_device(0x0af0, 0x7311)},
+       {default_port_device(0x0af0, 0xc031)},  /* Icon-Edge */
+       {icon321_port_device(0x0af0, 0xd013)},  /* Module HSxPA */
+       {icon321_port_device(0x0af0, 0xd031)},  /* Icon-321 */
+       {icon321_port_device(0x0af0, 0xd033)},  /* Icon-322 */
+       {USB_DEVICE(0x0af0, 0x7301)},           /* GE40x */
+       {USB_DEVICE(0x0af0, 0x7361)},           /* GE40x */
+       {USB_DEVICE(0x0af0, 0x7381)},           /* GE40x */
+       {USB_DEVICE(0x0af0, 0x7401)},           /* GI 0401 */
+       {USB_DEVICE(0x0af0, 0x7501)},           /* GTM 382 */
+       {USB_DEVICE(0x0af0, 0x7601)},           /* GE40x */
+       {USB_DEVICE(0x0af0, 0x7701)},
+       {USB_DEVICE(0x0af0, 0x7706)},
+       {USB_DEVICE(0x0af0, 0x7801)},
+       {USB_DEVICE(0x0af0, 0x7901)},
+       {USB_DEVICE(0x0af0, 0x7A01)},
+       {USB_DEVICE(0x0af0, 0x7A05)},
+       {USB_DEVICE(0x0af0, 0x8200)},
+       {USB_DEVICE(0x0af0, 0x8201)},
+       {USB_DEVICE(0x0af0, 0x8300)},
+       {USB_DEVICE(0x0af0, 0x8302)},
+       {USB_DEVICE(0x0af0, 0x8304)},
+       {USB_DEVICE(0x0af0, 0x8400)},
+       {USB_DEVICE(0x0af0, 0x8600)},
+       {USB_DEVICE(0x0af0, 0x8800)},
+       {USB_DEVICE(0x0af0, 0x8900)},
+       {USB_DEVICE(0x0af0, 0x9000)},
+       {USB_DEVICE(0x0af0, 0x9200)},           /* Option GTM671WFS */
+       {USB_DEVICE(0x0af0, 0xd035)},
+       {USB_DEVICE(0x0af0, 0xd055)},
+       {USB_DEVICE(0x0af0, 0xd155)},
+       {USB_DEVICE(0x0af0, 0xd255)},
+       {USB_DEVICE(0x0af0, 0xd057)},
+       {USB_DEVICE(0x0af0, 0xd157)},
+       {USB_DEVICE(0x0af0, 0xd257)},
+       {USB_DEVICE(0x0af0, 0xd357)},
+       {USB_DEVICE(0x0af0, 0xd058)},
+       {USB_DEVICE(0x0af0, 0xc100)},
+       {}
+};
+MODULE_DEVICE_TABLE(usb, hso_ids);
+
+/* Sysfs attribute */
+static ssize_t hso_sysfs_show_porttype(struct device *dev,
+                                      struct device_attribute *attr,
+                                      char *buf)
+{
+       struct hso_device *hso_dev = dev_get_drvdata(dev);
+       char *port_name;
+
+       if (!hso_dev)
+               return 0;
+
+       switch (hso_dev->port_spec & HSO_PORT_MASK) {
+       case HSO_PORT_CONTROL:
+               port_name = "Control";
+               break;
+       case HSO_PORT_APP:
+               port_name = "Application";
+               break;
+       case HSO_PORT_APP2:
+               port_name = "Application2";
+               break;
+       case HSO_PORT_GPS:
+               port_name = "GPS";
+               break;
+       case HSO_PORT_GPS_CONTROL:
+               port_name = "GPS Control";
+               break;
+       case HSO_PORT_PCSC:
+               port_name = "PCSC";
+               break;
+       case HSO_PORT_DIAG:
+               port_name = "Diagnostic";
+               break;
+       case HSO_PORT_DIAG2:
+               port_name = "Diagnostic2";
+               break;
+       case HSO_PORT_MODEM:
+               port_name = "Modem";
+               break;
+       case HSO_PORT_NETWORK:
+               port_name = "Network";
+               break;
+       default:
+               port_name = "Unknown";
+               break;
+       }
+
+       return sprintf(buf, "%s\n", port_name);
+}
+static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL);
+
+static struct attribute *hso_serial_dev_attrs[] = {
+       &dev_attr_hsotype.attr,
+       NULL
+};
+
+ATTRIBUTE_GROUPS(hso_serial_dev);
+
+static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb)
+{
+       int idx;
+
+       for (idx = 0; idx < serial->num_rx_urbs; idx++)
+               if (serial->rx_urb[idx] == urb)
+                       return idx;
+       dev_err(serial->parent->dev, "hso_urb_to_index failed\n");
+       return -1;
+}
+
+/* converts mux value to a port spec value */
+static u32 hso_mux_to_port(int mux)
+{
+       u32 result;
+
+       switch (mux) {
+       case 0x1:
+               result = HSO_PORT_CONTROL;
+               break;
+       case 0x2:
+               result = HSO_PORT_APP;
+               break;
+       case 0x4:
+               result = HSO_PORT_PCSC;
+               break;
+       case 0x8:
+               result = HSO_PORT_GPS;
+               break;
+       case 0x10:
+               result = HSO_PORT_APP2;
+               break;
+       default:
+               result = HSO_PORT_NO_PORT;
+       }
+       return result;
+}
+
+/* converts port spec value to a mux value */
+static u32 hso_port_to_mux(int port)
+{
+       u32 result;
+
+       switch (port & HSO_PORT_MASK) {
+       case HSO_PORT_CONTROL:
+               result = 0x0;
+               break;
+       case HSO_PORT_APP:
+               result = 0x1;
+               break;
+       case HSO_PORT_PCSC:
+               result = 0x2;
+               break;
+       case HSO_PORT_GPS:
+               result = 0x3;
+               break;
+       case HSO_PORT_APP2:
+               result = 0x4;
+               break;
+       default:
+               result = 0x0;
+       }
+       return result;
+}
+
+static struct hso_serial *get_serial_by_shared_int_and_type(
+                                       struct hso_shared_int *shared_int,
+                                       int mux)
+{
+       int i, port;
+
+       port = hso_mux_to_port(mux);
+
+       for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
+               if (serial_table[i] &&
+                   (dev2ser(serial_table[i])->shared_int == shared_int) &&
+                   ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
+                       return dev2ser(serial_table[i]);
+               }
+       }
+
+       return NULL;
+}
+
+static struct hso_serial *get_serial_by_index(unsigned index)
+{
+       struct hso_serial *serial = NULL;
+       unsigned long flags;
+
+       spin_lock_irqsave(&serial_table_lock, flags);
+       if (serial_table[index])
+               serial = dev2ser(serial_table[index]);
+       spin_unlock_irqrestore(&serial_table_lock, flags);
+
+       return serial;
+}
+
+static int get_free_serial_index(void)
+{
+       int index;
+       unsigned long flags;
+
+       spin_lock_irqsave(&serial_table_lock, flags);
+       for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) {
+               if (serial_table[index] == NULL) {
+                       spin_unlock_irqrestore(&serial_table_lock, flags);
+                       return index;
+               }
+       }
+       spin_unlock_irqrestore(&serial_table_lock, flags);
+
+       printk(KERN_ERR "%s: no free serial devices in table\n", __func__);
+       return -1;
+}
+
+static void set_serial_by_index(unsigned index, struct hso_serial *serial)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&serial_table_lock, flags);
+       if (serial)
+               serial_table[index] = serial->parent;
+       else
+               serial_table[index] = NULL;
+       spin_unlock_irqrestore(&serial_table_lock, flags);
+}
+
+static void handle_usb_error(int status, const char *function,
+                            struct hso_device *hso_dev)
+{
+       char *explanation;
+
+       switch (status) {
+       case -ENODEV:
+               explanation = "no device";
+               break;
+       case -ENOENT:
+               explanation = "endpoint not enabled";
+               break;
+       case -EPIPE:
+               explanation = "endpoint stalled";
+               break;
+       case -ENOSPC:
+               explanation = "not enough bandwidth";
+               break;
+       case -ESHUTDOWN:
+               explanation = "device disabled";
+               break;
+       case -EHOSTUNREACH:
+               explanation = "device suspended";
+               break;
+       case -EINVAL:
+       case -EAGAIN:
+       case -EFBIG:
+       case -EMSGSIZE:
+               explanation = "internal error";
+               break;
+       case -EILSEQ:
+       case -EPROTO:
+       case -ETIME:
+       case -ETIMEDOUT:
+               explanation = "protocol error";
+               if (hso_dev)
+                       usb_queue_reset_device(hso_dev->interface);
+               break;
+       default:
+               explanation = "unknown status";
+               break;
+       }
+
+       /* log a meaningful explanation of an USB status */
+       D1("%s: received USB status - %s (%d)", function, explanation, status);
+}
+
+/* Network interface functions */
+
+/* called when net interface is brought up by ifconfig */
+static int hso_net_open(struct net_device *net)
+{
+       struct hso_net *odev = netdev_priv(net);
+       unsigned long flags = 0;
+
+       if (!odev) {
+               dev_err(&net->dev, "No net device !\n");
+               return -ENODEV;
+       }
+
+       odev->skb_tx_buf = NULL;
+
+       /* setup environment */
+       spin_lock_irqsave(&odev->net_lock, flags);
+       odev->rx_parse_state = WAIT_IP;
+       odev->rx_buf_size = 0;
+       odev->rx_buf_missing = sizeof(struct iphdr);
+       spin_unlock_irqrestore(&odev->net_lock, flags);
+
+       /* We are up and running. */
+       set_bit(HSO_NET_RUNNING, &odev->flags);
+       hso_start_net_device(odev->parent);
+
+       /* Tell the kernel we are ready to start receiving from it */
+       netif_start_queue(net);
+
+       return 0;
+}
+
+/* called when interface is brought down by ifconfig */
+static int hso_net_close(struct net_device *net)
+{
+       struct hso_net *odev = netdev_priv(net);
+
+       /* we don't need the queue anymore */
+       netif_stop_queue(net);
+       /* no longer running */
+       clear_bit(HSO_NET_RUNNING, &odev->flags);
+
+       hso_stop_net_device(odev->parent);
+
+       /* done */
+       return 0;
+}
+
+/* USB tells is xmit done, we should start the netqueue again */
+static void write_bulk_callback(struct urb *urb)
+{
+       struct hso_net *odev = urb->context;
+       int status = urb->status;
+
+       /* Sanity check */
+       if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
+               dev_err(&urb->dev->dev, "%s: device not running\n", __func__);
+               return;
+       }
+
+       /* Do we still have a valid kernel network device? */
+       if (!netif_device_present(odev->net)) {
+               dev_err(&urb->dev->dev, "%s: net device not present\n",
+                       __func__);
+               return;
+       }
+
+       /* log status, but don't act on it, we don't need to resubmit anything
+        * anyhow */
+       if (status)
+               handle_usb_error(status, __func__, odev->parent);
+
+       hso_put_activity(odev->parent);
+
+       /* Tell the network interface we are ready for another frame */
+       netif_wake_queue(odev->net);
+}
+
+/* called by kernel when we need to transmit a packet */
+static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb,
+                                           struct net_device *net)
+{
+       struct hso_net *odev = netdev_priv(net);
+       int result;
+
+       /* Tell the kernel, "No more frames 'til we are done with this one." */
+       netif_stop_queue(net);
+       if (hso_get_activity(odev->parent) == -EAGAIN) {
+               odev->skb_tx_buf = skb;
+               return NETDEV_TX_OK;
+       }
+
+       /* log if asked */
+       DUMP1(skb->data, skb->len);
+       /* Copy it from kernel memory to OUR memory */
+       memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len);
+       D1("len: %d/%d", skb->len, MUX_BULK_TX_BUF_SIZE);
+
+       /* Fill in the URB for shipping it out. */
+       usb_fill_bulk_urb(odev->mux_bulk_tx_urb,
+                         odev->parent->usb,
+                         usb_sndbulkpipe(odev->parent->usb,
+                                         odev->out_endp->
+                                         bEndpointAddress & 0x7F),
+                         odev->mux_bulk_tx_buf, skb->len, write_bulk_callback,
+                         odev);
+
+       /* Deal with the Zero Length packet problem, I hope */
+       odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET;
+
+       /* Send the URB on its merry way. */
+       result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
+       if (result) {
+               dev_warn(&odev->parent->interface->dev,
+                       "failed mux_bulk_tx_urb %d\n", result);
+               net->stats.tx_errors++;
+               netif_start_queue(net);
+       } else {
+               net->stats.tx_packets++;
+               net->stats.tx_bytes += skb->len;
+       }
+       dev_kfree_skb(skb);
+       /* we're done */
+       return NETDEV_TX_OK;
+}
+
+static const struct ethtool_ops ops = {
+       .get_link = ethtool_op_get_link
+};
+
+/* called when a packet did not ack after watchdogtimeout */
+static void hso_net_tx_timeout(struct net_device *net)
+{
+       struct hso_net *odev = netdev_priv(net);
+
+       if (!odev)
+               return;
+
+       /* Tell syslog we are hosed. */
+       dev_warn(&net->dev, "Tx timed out.\n");
+
+       /* Tear the waiting frame off the list */
+       if (odev->mux_bulk_tx_urb &&
+           (odev->mux_bulk_tx_urb->status == -EINPROGRESS))
+               usb_unlink_urb(odev->mux_bulk_tx_urb);
+
+       /* Update statistics */
+       net->stats.tx_errors++;
+}
+
+/* make a real packet from the received USB buffer */
+static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
+                       unsigned int count, unsigned char is_eop)
+{
+       unsigned short temp_bytes;
+       unsigned short buffer_offset = 0;
+       unsigned short frame_len;
+       unsigned char *tmp_rx_buf;
+
+       /* log if needed */
+       D1("Rx %d bytes", count);
+       DUMP(ip_pkt, min(128, (int)count));
+
+       while (count) {
+               switch (odev->rx_parse_state) {
+               case WAIT_IP:
+                       /* waiting for IP header. */
+                       /* wanted bytes - size of ip header */
+                       temp_bytes =
+                           (count <
+                            odev->rx_buf_missing) ? count : odev->
+                           rx_buf_missing;
+
+                       memcpy(((unsigned char *)(&odev->rx_ip_hdr)) +
+                              odev->rx_buf_size, ip_pkt + buffer_offset,
+                              temp_bytes);
+
+                       odev->rx_buf_size += temp_bytes;
+                       buffer_offset += temp_bytes;
+                       odev->rx_buf_missing -= temp_bytes;
+                       count -= temp_bytes;
+
+                       if (!odev->rx_buf_missing) {
+                               /* header is complete allocate an sk_buffer and
+                                * continue to WAIT_DATA */
+                               frame_len = ntohs(odev->rx_ip_hdr.tot_len);
+
+                               if ((frame_len > DEFAULT_MRU) ||
+                                   (frame_len < sizeof(struct iphdr))) {
+                                       dev_err(&odev->net->dev,
+                                               "Invalid frame (%d) length\n",
+                                               frame_len);
+                                       odev->rx_parse_state = WAIT_SYNC;
+                                       continue;
+                               }
+                               /* Allocate an sk_buff */
+                               odev->skb_rx_buf = netdev_alloc_skb(odev->net,
+                                                                   frame_len);
+                               if (!odev->skb_rx_buf) {
+                                       /* We got no receive buffer. */
+                                       D1("could not allocate memory");
+                                       odev->rx_parse_state = WAIT_SYNC;
+                                       continue;
+                               }
+
+                               /* Copy what we got so far. make room for iphdr
+                                * after tail. */
+                               tmp_rx_buf =
+                                   skb_put(odev->skb_rx_buf,
+                                           sizeof(struct iphdr));
+                               memcpy(tmp_rx_buf, (char *)&(odev->rx_ip_hdr),
+                                      sizeof(struct iphdr));
+
+                               /* ETH_HLEN */
+                               odev->rx_buf_size = sizeof(struct iphdr);
+
+                               /* Filip actually use .tot_len */
+                               odev->rx_buf_missing =
+                                   frame_len - sizeof(struct iphdr);
+                               odev->rx_parse_state = WAIT_DATA;
+                       }
+                       break;
+
+               case WAIT_DATA:
+                       temp_bytes = (count < odev->rx_buf_missing)
+                                       ? count : odev->rx_buf_missing;
+
+                       /* Copy the rest of the bytes that are left in the
+                        * buffer into the waiting sk_buf. */
+                       /* Make room for temp_bytes after tail. */
+                       tmp_rx_buf = skb_put(odev->skb_rx_buf, temp_bytes);
+                       memcpy(tmp_rx_buf, ip_pkt + buffer_offset, temp_bytes);
+
+                       odev->rx_buf_missing -= temp_bytes;
+                       count -= temp_bytes;
+                       buffer_offset += temp_bytes;
+                       odev->rx_buf_size += temp_bytes;
+                       if (!odev->rx_buf_missing) {
+                               /* Packet is complete. Inject into stack. */
+                               /* We have IP packet here */
+                               odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
+                               skb_reset_mac_header(odev->skb_rx_buf);
+
+                               /* Ship it off to the kernel */
+                               netif_rx(odev->skb_rx_buf);
+                               /* No longer our buffer. */
+                               odev->skb_rx_buf = NULL;
+
+                               /* update out statistics */
+                               odev->net->stats.rx_packets++;
+
+                               odev->net->stats.rx_bytes += odev->rx_buf_size;
+
+                               odev->rx_buf_size = 0;
+                               odev->rx_buf_missing = sizeof(struct iphdr);
+                               odev->rx_parse_state = WAIT_IP;
+                       }
+                       break;
+
+               case WAIT_SYNC:
+                       D1(" W_S");
+                       count = 0;
+                       break;
+               default:
+                       D1(" ");
+                       count--;
+                       break;
+               }
+       }
+
+       /* Recovery mechanism for WAIT_SYNC state. */
+       if (is_eop) {
+               if (odev->rx_parse_state == WAIT_SYNC) {
+                       odev->rx_parse_state = WAIT_IP;
+                       odev->rx_buf_size = 0;
+                       odev->rx_buf_missing = sizeof(struct iphdr);
+               }
+       }
+}
+
+static void fix_crc_bug(struct urb *urb, __le16 max_packet_size)
+{
+       static const u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
+       u32 rest = urb->actual_length % le16_to_cpu(max_packet_size);
+
+       if (((rest == 5) || (rest == 6)) &&
+           !memcmp(((u8 *)urb->transfer_buffer) + urb->actual_length - 4,
+                   crc_check, 4)) {
+               urb->actual_length -= 4;
+       }
+}
+
+/* Moving data from usb to kernel (in interrupt state) */
+static void read_bulk_callback(struct urb *urb)
+{
+       struct hso_net *odev = urb->context;
+       struct net_device *net;
+       int result;
+       int status = urb->status;
+
+       /* is al ok?  (Filip: Who's Al ?) */
+       if (status) {
+               handle_usb_error(status, __func__, odev->parent);
+               return;
+       }
+
+       /* Sanity check */
+       if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
+               D1("BULK IN callback but driver is not active!");
+               return;
+       }
+       usb_mark_last_busy(urb->dev);
+
+       net = odev->net;
+
+       if (!netif_device_present(net)) {
+               /* Somebody killed our network interface... */
+               return;
+       }
+
+       if (odev->parent->port_spec & HSO_INFO_CRC_BUG)
+               fix_crc_bug(urb, odev->in_endp->wMaxPacketSize);
+
+       /* do we even have a packet? */
+       if (urb->actual_length) {
+               /* Handle the IP stream, add header and push it onto network
+                * stack if the packet is complete. */
+               spin_lock(&odev->net_lock);
+               packetizeRx(odev, urb->transfer_buffer, urb->actual_length,
+                           (urb->transfer_buffer_length >
+                            urb->actual_length) ? 1 : 0);
+               spin_unlock(&odev->net_lock);
+       }
+
+       /* We are done with this URB, resubmit it. Prep the USB to wait for
+        * another frame. Reuse same as received. */
+       usb_fill_bulk_urb(urb,
+                         odev->parent->usb,
+                         usb_rcvbulkpipe(odev->parent->usb,
+                                         odev->in_endp->
+                                         bEndpointAddress & 0x7F),
+                         urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE,
+                         read_bulk_callback, odev);
+
+       /* Give this to the USB subsystem so it can tell us when more data
+        * arrives. */
+       result = usb_submit_urb(urb, GFP_ATOMIC);
+       if (result)
+               dev_warn(&odev->parent->interface->dev,
+                        "%s failed submit mux_bulk_rx_urb %d\n", __func__,
+                        result);
+}
+
+/* Serial driver functions */
+
+static void hso_init_termios(struct ktermios *termios)
+{
+       /*
+        * The default requirements for this device are:
+        */
+       termios->c_iflag &=
+               ~(IGNBRK        /* disable ignore break */
+               | BRKINT        /* disable break causes interrupt */
+               | PARMRK        /* disable mark parity errors */
+               | ISTRIP        /* disable clear high bit of input characters */
+               | INLCR         /* disable translate NL to CR */
+               | IGNCR         /* disable ignore CR */
+               | ICRNL         /* disable translate CR to NL */
+               | IXON);        /* disable enable XON/XOFF flow control */
+
+       /* disable postprocess output characters */
+       termios->c_oflag &= ~OPOST;
+
+       termios->c_lflag &=
+               ~(ECHO          /* disable echo input characters */
+               | ECHONL        /* disable echo new line */
+               | ICANON        /* disable erase, kill, werase, and rprnt
+                                  special characters */
+               | ISIG          /* disable interrupt, quit, and suspend special
+                                  characters */
+               | IEXTEN);      /* disable non-POSIX special characters */
+
+       termios->c_cflag &=
+               ~(CSIZE         /* no size */
+               | PARENB        /* disable parity bit */
+               | CBAUD         /* clear current baud rate */
+               | CBAUDEX);     /* clear current buad rate */
+
+       termios->c_cflag |= CS8;        /* character size 8 bits */
+
+       /* baud rate 115200 */
+       tty_termios_encode_baud_rate(termios, 115200, 115200);
+}
+
+static void _hso_serial_set_termios(struct tty_struct *tty,
+                                   struct ktermios *old)
+{
+       struct hso_serial *serial = tty->driver_data;
+
+       if (!serial) {
+               printk(KERN_ERR "%s: no tty structures", __func__);
+               return;
+       }
+
+       D4("port %d", serial->minor);
+
+       /*
+        *      Fix up unsupported bits
+        */
+       tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
+
+       tty->termios.c_cflag &=
+               ~(CSIZE         /* no size */
+               | PARENB        /* disable parity bit */
+               | CBAUD         /* clear current baud rate */
+               | CBAUDEX);     /* clear current buad rate */
+
+       tty->termios.c_cflag |= CS8;    /* character size 8 bits */
+
+       /* baud rate 115200 */
+       tty_encode_baud_rate(tty, 115200, 115200);
+}
+
+static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb)
+{
+       int result;
+       /* We are done with this URB, resubmit it. Prep the USB to wait for
+        * another frame */
+       usb_fill_bulk_urb(urb, serial->parent->usb,
+                         usb_rcvbulkpipe(serial->parent->usb,
+                                         serial->in_endp->
+                                         bEndpointAddress & 0x7F),
+                         urb->transfer_buffer, serial->rx_data_length,
+                         hso_std_serial_read_bulk_callback, serial);
+       /* Give this to the USB subsystem so it can tell us when more data
+        * arrives. */
+       result = usb_submit_urb(urb, GFP_ATOMIC);
+       if (result) {
+               dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n",
+                       __func__, result);
+       }
+}
+
+
+
+
+static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial)
+{
+       int count;
+       struct urb *curr_urb;
+
+       while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
+               curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
+               count = put_rxbuf_data(curr_urb, serial);
+               if (count == -1)
+                       return;
+               if (count == 0) {
+                       serial->curr_rx_urb_idx++;
+                       if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
+                               serial->curr_rx_urb_idx = 0;
+                       hso_resubmit_rx_bulk_urb(serial, curr_urb);
+               }
+       }
+}
+
+static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial)
+{
+       int count = 0;
+       struct urb *urb;
+
+       urb = serial->rx_urb[0];
+       if (serial->port.count > 0) {
+               count = put_rxbuf_data(urb, serial);
+               if (count == -1)
+                       return;
+       }
+       /* Re issue a read as long as we receive data. */
+
+       if (count == 0 && ((urb->actual_length != 0) ||
+                          (serial->rx_state == RX_PENDING))) {
+               serial->rx_state = RX_SENT;
+               hso_mux_serial_read(serial);
+       } else
+               serial->rx_state = RX_IDLE;
+}
+
+
+/* read callback for Diag and CS port */
+static void hso_std_serial_read_bulk_callback(struct urb *urb)
+{
+       struct hso_serial *serial = urb->context;
+       int status = urb->status;
+
+       D4("\n--- Got serial_read_bulk callback %02x ---", status);
+
+       /* sanity check */
+       if (!serial) {
+               D1("serial == NULL");
+               return;
+       }
+       if (status) {
+               handle_usb_error(status, __func__, serial->parent);
+               return;
+       }
+
+       D1("Actual length = %d\n", urb->actual_length);
+       DUMP1(urb->transfer_buffer, urb->actual_length);
+
+       /* Anyone listening? */
+       if (serial->port.count == 0)
+               return;
+
+       if (serial->parent->port_spec & HSO_INFO_CRC_BUG)
+               fix_crc_bug(urb, serial->in_endp->wMaxPacketSize);
+       /* Valid data, handle RX data */
+       spin_lock(&serial->serial_lock);
+       serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
+       put_rxbuf_data_and_resubmit_bulk_urb(serial);
+       spin_unlock(&serial->serial_lock);
+}
+
+/*
+ * This needs to be a tasklet otherwise we will
+ * end up recursively calling this function.
+ */
+static void hso_unthrottle_tasklet(struct hso_serial *serial)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&serial->serial_lock, flags);
+       if ((serial->parent->port_spec & HSO_INTF_MUX))
+               put_rxbuf_data_and_resubmit_ctrl_urb(serial);
+       else
+               put_rxbuf_data_and_resubmit_bulk_urb(serial);
+       spin_unlock_irqrestore(&serial->serial_lock, flags);
+}
+
+static void hso_unthrottle(struct tty_struct *tty)
+{
+       struct hso_serial *serial = tty->driver_data;
+
+       tasklet_hi_schedule(&serial->unthrottle_tasklet);
+}
+
+/* open the requested serial port */
+static int hso_serial_open(struct tty_struct *tty, struct file *filp)
+{
+       struct hso_serial *serial = get_serial_by_index(tty->index);
+       int result;
+
+       /* sanity check */
+       if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) {
+               WARN_ON(1);
+               tty->driver_data = NULL;
+               D1("Failed to open port");
+               return -ENODEV;
+       }
+
+       mutex_lock(&serial->parent->mutex);
+       result = usb_autopm_get_interface(serial->parent->interface);
+       if (result < 0)
+               goto err_out;
+
+       D1("Opening %d", serial->minor);
+
+       /* setup */
+       tty->driver_data = serial;
+       tty_port_tty_set(&serial->port, tty);
+
+       /* check for port already opened, if not set the termios */
+       serial->port.count++;
+       if (serial->port.count == 1) {
+               serial->rx_state = RX_IDLE;
+               /* Force default termio settings */
+               _hso_serial_set_termios(tty, NULL);
+               tasklet_init(&serial->unthrottle_tasklet,
+                            (void (*)(unsigned long))hso_unthrottle_tasklet,
+                            (unsigned long)serial);
+               result = hso_start_serial_device(serial->parent, GFP_KERNEL);
+               if (result) {
+                       hso_stop_serial_device(serial->parent);
+                       serial->port.count--;
+               } else {
+                       kref_get(&serial->parent->ref);
+               }
+       } else {
+               D1("Port was already open");
+       }
+
+       usb_autopm_put_interface(serial->parent->interface);
+
+       /* done */
+       if (result)
+               hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0);
+err_out:
+       mutex_unlock(&serial->parent->mutex);
+       return result;
+}
+
+/* close the requested serial port */
+static void hso_serial_close(struct tty_struct *tty, struct file *filp)
+{
+       struct hso_serial *serial = tty->driver_data;
+       u8 usb_gone;
+
+       D1("Closing serial port");
+
+       /* Open failed, no close cleanup required */
+       if (serial == NULL)
+               return;
+
+       mutex_lock(&serial->parent->mutex);
+       usb_gone = serial->parent->usb_gone;
+
+       if (!usb_gone)
+               usb_autopm_get_interface(serial->parent->interface);
+
+       /* reset the rts and dtr */
+       /* do the actual close */
+       serial->port.count--;
+
+       if (serial->port.count <= 0) {
+               serial->port.count = 0;
+               tty_port_tty_set(&serial->port, NULL);
+               if (!usb_gone)
+                       hso_stop_serial_device(serial->parent);
+               tasklet_kill(&serial->unthrottle_tasklet);
+       }
+
+       if (!usb_gone)
+               usb_autopm_put_interface(serial->parent->interface);
+
+       mutex_unlock(&serial->parent->mutex);
+}
+
+/* close the requested serial port */
+static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
+                           int count)
+{
+       struct hso_serial *serial = tty->driver_data;
+       int space, tx_bytes;
+       unsigned long flags;
+
+       /* sanity check */
+       if (serial == NULL) {
+               printk(KERN_ERR "%s: serial is NULL\n", __func__);
+               return -ENODEV;
+       }
+
+       spin_lock_irqsave(&serial->serial_lock, flags);
+
+       space = serial->tx_data_length - serial->tx_buffer_count;
+       tx_bytes = (count < space) ? count : space;
+
+       if (!tx_bytes)
+               goto out;
+
+       memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes);
+       serial->tx_buffer_count += tx_bytes;
+
+out:
+       spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+       hso_kick_transmit(serial);
+       /* done */
+       return tx_bytes;
+}
+
+/* how much room is there for writing */
+static int hso_serial_write_room(struct tty_struct *tty)
+{
+       struct hso_serial *serial = tty->driver_data;
+       int room;
+       unsigned long flags;
+
+       spin_lock_irqsave(&serial->serial_lock, flags);
+       room = serial->tx_data_length - serial->tx_buffer_count;
+       spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+       /* return free room */
+       return room;
+}
+
+static void hso_serial_cleanup(struct tty_struct *tty)
+{
+       struct hso_serial *serial = tty->driver_data;
+
+       if (!serial)
+               return;
+
+       kref_put(&serial->parent->ref, hso_serial_ref_free);
+}
+
+/* setup the term */
+static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
+{
+       struct hso_serial *serial = tty->driver_data;
+       unsigned long flags;
+
+       if (old)
+               D5("Termios called with: cflags new[%d] - old[%d]",
+                  tty->termios.c_cflag, old->c_cflag);
+
+       /* the actual setup */
+       spin_lock_irqsave(&serial->serial_lock, flags);
+       if (serial->port.count)
+               _hso_serial_set_termios(tty, old);
+       else
+               tty->termios = *old;
+       spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+       /* done */
+}
+
+/* how many characters in the buffer */
+static int hso_serial_chars_in_buffer(struct tty_struct *tty)
+{
+       struct hso_serial *serial = tty->driver_data;
+       int chars;
+       unsigned long flags;
+
+       /* sanity check */
+       if (serial == NULL)
+               return 0;
+
+       spin_lock_irqsave(&serial->serial_lock, flags);
+       chars = serial->tx_buffer_count;
+       spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+       return chars;
+}
+static int tiocmget_submit_urb(struct hso_serial *serial,
+                              struct hso_tiocmget *tiocmget,
+                              struct usb_device *usb)
+{
+       int result;
+
+       if (serial->parent->usb_gone)
+               return -ENODEV;
+       usb_fill_int_urb(tiocmget->urb, usb,
+                        usb_rcvintpipe(usb,
+                                       tiocmget->endp->
+                                       bEndpointAddress & 0x7F),
+                        &tiocmget->serial_state_notification,
+                        sizeof(struct hso_serial_state_notification),
+                        tiocmget_intr_callback, serial,
+                        tiocmget->endp->bInterval);
+       result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC);
+       if (result) {
+               dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__,
+                        result);
+       }
+       return result;
+
+}
+
+static void tiocmget_intr_callback(struct urb *urb)
+{
+       struct hso_serial *serial = urb->context;
+       struct hso_tiocmget *tiocmget;
+       int status = urb->status;
+       u16 UART_state_bitmap, prev_UART_state_bitmap;
+       struct uart_icount *icount;
+       struct hso_serial_state_notification *serial_state_notification;
+       struct usb_device *usb;
+       struct usb_interface *interface;
+       int if_num;
+
+       /* Sanity checks */
+       if (!serial)
+               return;
+       if (status) {
+               handle_usb_error(status, __func__, serial->parent);
+               return;
+       }
+
+       /* tiocmget is only supported on HSO_PORT_MODEM */
+       tiocmget = serial->tiocmget;
+       if (!tiocmget)
+               return;
+       BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM);
+
+       usb = serial->parent->usb;
+       interface = serial->parent->interface;
+
+       if_num = interface->cur_altsetting->desc.bInterfaceNumber;
+
+       /* wIndex should be the USB interface number of the port to which the
+        * notification applies, which should always be the Modem port.
+        */
+       serial_state_notification = &tiocmget->serial_state_notification;
+       if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
+           serial_state_notification->bNotification != B_NOTIFICATION ||
+           le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
+           le16_to_cpu(serial_state_notification->wIndex) != if_num ||
+           le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
+               dev_warn(&usb->dev,
+                        "hso received invalid serial state notification\n");
+               DUMP(serial_state_notification,
+                    sizeof(struct hso_serial_state_notification));
+       } else {
+
+               UART_state_bitmap = le16_to_cpu(serial_state_notification->
+                                               UART_state_bitmap);
+               prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap;
+               icount = &tiocmget->icount;
+               spin_lock(&serial->serial_lock);
+               if ((UART_state_bitmap & B_OVERRUN) !=
+                  (prev_UART_state_bitmap & B_OVERRUN))
+                       icount->parity++;
+               if ((UART_state_bitmap & B_PARITY) !=
+                  (prev_UART_state_bitmap & B_PARITY))
+                       icount->parity++;
+               if ((UART_state_bitmap & B_FRAMING) !=
+                  (prev_UART_state_bitmap & B_FRAMING))
+                       icount->frame++;
+               if ((UART_state_bitmap & B_RING_SIGNAL) &&
+                  !(prev_UART_state_bitmap & B_RING_SIGNAL))
+                       icount->rng++;
+               if ((UART_state_bitmap & B_BREAK) !=
+                  (prev_UART_state_bitmap & B_BREAK))
+                       icount->brk++;
+               if ((UART_state_bitmap & B_TX_CARRIER) !=
+                  (prev_UART_state_bitmap & B_TX_CARRIER))
+                       icount->dsr++;
+               if ((UART_state_bitmap & B_RX_CARRIER) !=
+                  (prev_UART_state_bitmap & B_RX_CARRIER))
+                       icount->dcd++;
+               tiocmget->prev_UART_state_bitmap = UART_state_bitmap;
+               spin_unlock(&serial->serial_lock);
+               tiocmget->intr_completed = 1;
+               wake_up_interruptible(&tiocmget->waitq);
+       }
+       memset(serial_state_notification, 0,
+              sizeof(struct hso_serial_state_notification));
+       tiocmget_submit_urb(serial,
+                           tiocmget,
+                           serial->parent->usb);
+}
+
+/*
+ * next few functions largely stolen from drivers/serial/serial_core.c
+ */
+/* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+static int
+hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
+{
+       DECLARE_WAITQUEUE(wait, current);
+       struct uart_icount cprev, cnow;
+       struct hso_tiocmget  *tiocmget;
+       int ret;
+
+       tiocmget = serial->tiocmget;
+       if (!tiocmget)
+               return -ENOENT;
+       /*
+        * note the counters on entry
+        */
+       spin_lock_irq(&serial->serial_lock);
+       memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount));
+       spin_unlock_irq(&serial->serial_lock);
+       add_wait_queue(&tiocmget->waitq, &wait);
+       for (;;) {
+               spin_lock_irq(&serial->serial_lock);
+               memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
+               spin_unlock_irq(&serial->serial_lock);
+               set_current_state(TASK_INTERRUPTIBLE);
+               if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+                   ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+                   ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd))) {
+                       ret = 0;
+                       break;
+               }
+               schedule();
+               /* see if a signal did it */
+               if (signal_pending(current)) {
+                       ret = -ERESTARTSYS;
+                       break;
+               }
+               cprev = cnow;
+       }
+       __set_current_state(TASK_RUNNING);
+       remove_wait_queue(&tiocmget->waitq, &wait);
+
+       return ret;
+}
+
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int hso_get_count(struct tty_struct *tty,
+                 struct serial_icounter_struct *icount)
+{
+       struct uart_icount cnow;
+       struct hso_serial *serial = tty->driver_data;
+       struct hso_tiocmget  *tiocmget = serial->tiocmget;
+
+       memset(icount, 0, sizeof(struct serial_icounter_struct));
+
+       if (!tiocmget)
+                return -ENOENT;
+       spin_lock_irq(&serial->serial_lock);
+       memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
+       spin_unlock_irq(&serial->serial_lock);
+
+       icount->cts         = cnow.cts;
+       icount->dsr         = cnow.dsr;
+       icount->rng         = cnow.rng;
+       icount->dcd         = cnow.dcd;
+       icount->rx          = cnow.rx;
+       icount->tx          = cnow.tx;
+       icount->frame       = cnow.frame;
+       icount->overrun     = cnow.overrun;
+       icount->parity      = cnow.parity;
+       icount->brk         = cnow.brk;
+       icount->buf_overrun = cnow.buf_overrun;
+
+       return 0;
+}
+
+
+static int hso_serial_tiocmget(struct tty_struct *tty)
+{
+       int retval;
+       struct hso_serial *serial = tty->driver_data;
+       struct hso_tiocmget  *tiocmget;
+       u16 UART_state_bitmap;
+
+       /* sanity check */
+       if (!serial) {
+               D1("no tty structures");
+               return -EINVAL;
+       }
+       spin_lock_irq(&serial->serial_lock);
+       retval = ((serial->rts_state) ? TIOCM_RTS : 0) |
+           ((serial->dtr_state) ? TIOCM_DTR : 0);
+       tiocmget = serial->tiocmget;
+       if (tiocmget) {
+
+               UART_state_bitmap = le16_to_cpu(
+                       tiocmget->prev_UART_state_bitmap);
+               if (UART_state_bitmap & B_RING_SIGNAL)
+                       retval |=  TIOCM_RNG;
+               if (UART_state_bitmap & B_RX_CARRIER)
+                       retval |=  TIOCM_CD;
+               if (UART_state_bitmap & B_TX_CARRIER)
+                       retval |=  TIOCM_DSR;
+       }
+       spin_unlock_irq(&serial->serial_lock);
+       return retval;
+}
+
+static int hso_serial_tiocmset(struct tty_struct *tty,
+                              unsigned int set, unsigned int clear)
+{
+       int val = 0;
+       unsigned long flags;
+       int if_num;
+       struct hso_serial *serial = tty->driver_data;
+       struct usb_interface *interface;
+
+       /* sanity check */
+       if (!serial) {
+               D1("no tty structures");
+               return -EINVAL;
+       }
+
+       if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
+               return -EINVAL;
+
+       interface = serial->parent->interface;
+       if_num = interface->cur_altsetting->desc.bInterfaceNumber;
+
+       spin_lock_irqsave(&serial->serial_lock, flags);
+       if (set & TIOCM_RTS)
+               serial->rts_state = 1;
+       if (set & TIOCM_DTR)
+               serial->dtr_state = 1;
+
+       if (clear & TIOCM_RTS)
+               serial->rts_state = 0;
+       if (clear & TIOCM_DTR)
+               serial->dtr_state = 0;
+
+       if (serial->dtr_state)
+               val |= 0x01;
+       if (serial->rts_state)
+               val |= 0x02;
+
+       spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+       return usb_control_msg(serial->parent->usb,
+                              usb_rcvctrlpipe(serial->parent->usb, 0), 0x22,
+                              0x21, val, if_num, NULL, 0,
+                              USB_CTRL_SET_TIMEOUT);
+}
+
+static int hso_serial_ioctl(struct tty_struct *tty,
+                           unsigned int cmd, unsigned long arg)
+{
+       struct hso_serial *serial = tty->driver_data;
+       int ret = 0;
+       D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
+
+       if (!serial)
+               return -ENODEV;
+       switch (cmd) {
+       case TIOCMIWAIT:
+               ret = hso_wait_modem_status(serial, arg);
+               break;
+       default:
+               ret = -ENOIOCTLCMD;
+               break;
+       }
+       return ret;
+}
+
+
+/* starts a transmit */
+static void hso_kick_transmit(struct hso_serial *serial)
+{
+       u8 *temp;
+       unsigned long flags;
+       int res;
+
+       spin_lock_irqsave(&serial->serial_lock, flags);
+       if (!serial->tx_buffer_count)
+               goto out;
+
+       if (serial->tx_urb_used)
+               goto out;
+
+       /* Wakeup USB interface if necessary */
+       if (hso_get_activity(serial->parent) == -EAGAIN)
+               goto out;
+
+       /* Switch pointers around to avoid memcpy */
+       temp = serial->tx_buffer;
+       serial->tx_buffer = serial->tx_data;
+       serial->tx_data = temp;
+       serial->tx_data_count = serial->tx_buffer_count;
+       serial->tx_buffer_count = 0;
+
+       /* If temp is set, it means we switched buffers */
+       if (temp && serial->write_data) {
+               res = serial->write_data(serial);
+               if (res >= 0)
+                       serial->tx_urb_used = 1;
+       }
+out:
+       spin_unlock_irqrestore(&serial->serial_lock, flags);
+}
+
+/* make a request (for reading and writing data to muxed serial port) */
+static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
+                             struct urb *ctrl_urb,
+                             struct usb_ctrlrequest *ctrl_req,
+                             u8 *ctrl_urb_data, u32 size)
+{
+       int result;
+       int pipe;
+
+       /* Sanity check */
+       if (!serial || !ctrl_urb || !ctrl_req) {
+               printk(KERN_ERR "%s: Wrong arguments\n", __func__);
+               return -EINVAL;
+       }
+
+       /* initialize */
+       ctrl_req->wValue = 0;
+       ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
+       ctrl_req->wLength = cpu_to_le16(size);
+
+       if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
+               /* Reading command */
+               ctrl_req->bRequestType = USB_DIR_IN |
+                                        USB_TYPE_OPTION_VENDOR |
+                                        USB_RECIP_INTERFACE;
+               ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
+               pipe = usb_rcvctrlpipe(serial->parent->usb, 0);
+       } else {
+               /* Writing command */
+               ctrl_req->bRequestType = USB_DIR_OUT |
+                                        USB_TYPE_OPTION_VENDOR |
+                                        USB_RECIP_INTERFACE;
+               ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
+               pipe = usb_sndctrlpipe(serial->parent->usb, 0);
+       }
+       /* syslog */
+       D2("%s command (%02x) len: %d, port: %d",
+          type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write",
+          ctrl_req->bRequestType, ctrl_req->wLength, port);
+
+       /* Load ctrl urb */
+       ctrl_urb->transfer_flags = 0;
+       usb_fill_control_urb(ctrl_urb,
+                            serial->parent->usb,
+                            pipe,
+                            (u8 *) ctrl_req,
+                            ctrl_urb_data, size, ctrl_callback, serial);
+       /* Send it on merry way */
+       result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
+       if (result) {
+               dev_err(&ctrl_urb->dev->dev,
+                       "%s failed submit ctrl_urb %d type %d\n", __func__,
+                       result, type);
+               return result;
+       }
+
+       /* done */
+       return size;
+}
+
+/* called by intr_callback when read occurs */
+static int hso_mux_serial_read(struct hso_serial *serial)
+{
+       if (!serial)
+               return -EINVAL;
+
+       /* clean data */
+       memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE);
+       /* make the request */
+
+       if (serial->num_rx_urbs != 1) {
+               dev_err(&serial->parent->interface->dev,
+                       "ERROR: mux'd reads with multiple buffers "
+                       "not possible\n");
+               return 0;
+       }
+       return mux_device_request(serial,
+                                 USB_CDC_GET_ENCAPSULATED_RESPONSE,
+                                 serial->parent->port_spec & HSO_PORT_MASK,
+                                 serial->rx_urb[0],
+                                 &serial->ctrl_req_rx,
+                                 serial->rx_data[0], serial->rx_data_length);
+}
+
+/* used for muxed serial port callback (muxed serial read) */
+static void intr_callback(struct urb *urb)
+{
+       struct hso_shared_int *shared_int = urb->context;
+       struct hso_serial *serial;
+       unsigned char *port_req;
+       int status = urb->status;
+       int i;
+
+       usb_mark_last_busy(urb->dev);
+
+       /* sanity check */
+       if (!shared_int)
+               return;
+
+       /* status check */
+       if (status) {
+               handle_usb_error(status, __func__, NULL);
+               return;
+       }
+       D4("\n--- Got intr callback 0x%02X ---", status);
+
+       /* what request? */
+       port_req = urb->transfer_buffer;
+       D4(" port_req = 0x%.2X\n", *port_req);
+       /* loop over all muxed ports to find the one sending this */
+       for (i = 0; i < 8; i++) {
+               /* max 8 channels on MUX */
+               if (*port_req & (1 << i)) {
+                       serial = get_serial_by_shared_int_and_type(shared_int,
+                                                                  (1 << i));
+                       if (serial != NULL) {
+                               D1("Pending read interrupt on port %d\n", i);
+                               spin_lock(&serial->serial_lock);
+                               if (serial->rx_state == RX_IDLE &&
+                                       serial->port.count > 0) {
+                                       /* Setup and send a ctrl req read on
+                                        * port i */
+                                       if (!serial->rx_urb_filled[0]) {
+                                               serial->rx_state = RX_SENT;
+                                               hso_mux_serial_read(serial);
+                                       } else
+                                               serial->rx_state = RX_PENDING;
+                               } else {
+                                       D1("Already a read pending on "
+                                          "port %d or port not open\n", i);
+                               }
+                               spin_unlock(&serial->serial_lock);
+                       }
+               }
+       }
+       /* Resubmit interrupt urb */
+       hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC);
+}
+
+/* called for writing to muxed serial port */
+static int hso_mux_serial_write_data(struct hso_serial *serial)
+{
+       if (NULL == serial)
+               return -EINVAL;
+
+       return mux_device_request(serial,
+                                 USB_CDC_SEND_ENCAPSULATED_COMMAND,
+                                 serial->parent->port_spec & HSO_PORT_MASK,
+                                 serial->tx_urb,
+                                 &serial->ctrl_req_tx,
+                                 serial->tx_data, serial->tx_data_count);
+}
+
+/* write callback for Diag and CS port */
+static void hso_std_serial_write_bulk_callback(struct urb *urb)
+{
+       struct hso_serial *serial = urb->context;
+       int status = urb->status;
+
+       /* sanity check */
+       if (!serial) {
+               D1("serial == NULL");
+               return;
+       }
+
+       spin_lock(&serial->serial_lock);
+       serial->tx_urb_used = 0;
+       spin_unlock(&serial->serial_lock);
+       if (status) {
+               handle_usb_error(status, __func__, serial->parent);
+               return;
+       }
+       hso_put_activity(serial->parent);
+       tty_port_tty_wakeup(&serial->port);
+       hso_kick_transmit(serial);
+
+       D1(" ");
+}
+
+/* called for writing diag or CS serial port */
+static int hso_std_serial_write_data(struct hso_serial *serial)
+{
+       int count = serial->tx_data_count;
+       int result;
+
+       usb_fill_bulk_urb(serial->tx_urb,
+                         serial->parent->usb,
+                         usb_sndbulkpipe(serial->parent->usb,
+                                         serial->out_endp->
+                                         bEndpointAddress & 0x7F),
+                         serial->tx_data, serial->tx_data_count,
+                         hso_std_serial_write_bulk_callback, serial);
+
+       result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC);
+       if (result) {
+               dev_warn(&serial->parent->usb->dev,
+                        "Failed to submit urb - res %d\n", result);
+               return result;
+       }
+
+       return count;
+}
+
+/* callback after read or write on muxed serial port */
+static void ctrl_callback(struct urb *urb)
+{
+       struct hso_serial *serial = urb->context;
+       struct usb_ctrlrequest *req;
+       int status = urb->status;
+
+       /* sanity check */
+       if (!serial)
+               return;
+
+       spin_lock(&serial->serial_lock);
+       serial->tx_urb_used = 0;
+       spin_unlock(&serial->serial_lock);
+       if (status) {
+               handle_usb_error(status, __func__, serial->parent);
+               return;
+       }
+
+       /* what request? */
+       req = (struct usb_ctrlrequest *)(urb->setup_packet);
+       D4("\n--- Got muxed ctrl callback 0x%02X ---", status);
+       D4("Actual length of urb = %d\n", urb->actual_length);
+       DUMP1(urb->transfer_buffer, urb->actual_length);
+
+       if (req->bRequestType ==
+           (USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) {
+               /* response to a read command */
+               serial->rx_urb_filled[0] = 1;
+               spin_lock(&serial->serial_lock);
+               put_rxbuf_data_and_resubmit_ctrl_urb(serial);
+               spin_unlock(&serial->serial_lock);
+       } else {
+               hso_put_activity(serial->parent);
+               tty_port_tty_wakeup(&serial->port);
+               /* response to a write command */
+               hso_kick_transmit(serial);
+       }
+}
+
+/* handle RX data for serial port */
+static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
+{
+       struct tty_struct *tty;
+       int count;
+
+       /* Sanity check */
+       if (urb == NULL || serial == NULL) {
+               D1("serial = NULL");
+               return -2;
+       }
+
+       tty = tty_port_tty_get(&serial->port);
+
+       if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
+               tty_kref_put(tty);
+               return -1;
+       }
+
+       /* Push data to tty */
+       D1("data to push to tty");
+       count = tty_buffer_request_room(&serial->port, urb->actual_length);
+       if (count >= urb->actual_length) {
+               tty_insert_flip_string(&serial->port, urb->transfer_buffer,
+                                      urb->actual_length);
+               tty_flip_buffer_push(&serial->port);
+       } else {
+               dev_warn(&serial->parent->usb->dev,
+                        "dropping data, %d bytes lost\n", urb->actual_length);
+       }
+
+       tty_kref_put(tty);
+
+       serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
+
+       return 0;
+}
+
+
+/* Base driver functions */
+
+static void hso_log_port(struct hso_device *hso_dev)
+{
+       char *port_type;
+       char port_dev[20];
+
+       switch (hso_dev->port_spec & HSO_PORT_MASK) {
+       case HSO_PORT_CONTROL:
+               port_type = "Control";
+               break;
+       case HSO_PORT_APP:
+               port_type = "Application";
+               break;
+       case HSO_PORT_GPS:
+               port_type = "GPS";
+               break;
+       case HSO_PORT_GPS_CONTROL:
+               port_type = "GPS control";
+               break;
+       case HSO_PORT_APP2:
+               port_type = "Application2";
+               break;
+       case HSO_PORT_PCSC:
+               port_type = "PCSC";
+               break;
+       case HSO_PORT_DIAG:
+               port_type = "Diagnostic";
+               break;
+       case HSO_PORT_DIAG2:
+               port_type = "Diagnostic2";
+               break;
+       case HSO_PORT_MODEM:
+               port_type = "Modem";
+               break;
+       case HSO_PORT_NETWORK:
+               port_type = "Network";
+               break;
+       default:
+               port_type = "Unknown";
+               break;
+       }
+       if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+               sprintf(port_dev, "%s", dev2net(hso_dev)->net->name);
+       } else
+               sprintf(port_dev, "/dev/%s%d", tty_filename,
+                       dev2ser(hso_dev)->minor);
+
+       dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n",
+               port_type, port_dev);
+}
+
+static int hso_start_net_device(struct hso_device *hso_dev)
+{
+       int i, result = 0;
+       struct hso_net *hso_net = dev2net(hso_dev);
+
+       if (!hso_net)
+               return -ENODEV;
+
+       /* send URBs for all read buffers */
+       for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+
+               /* Prep a receive URB */
+               usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i],
+                                 hso_dev->usb,
+                                 usb_rcvbulkpipe(hso_dev->usb,
+                                                 hso_net->in_endp->
+                                                 bEndpointAddress & 0x7F),
+                                 hso_net->mux_bulk_rx_buf_pool[i],
+                                 MUX_BULK_RX_BUF_SIZE, read_bulk_callback,
+                                 hso_net);
+
+               /* Put it out there so the device can send us stuff */
+               result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i],
+                                       GFP_NOIO);
+               if (result)
+                       dev_warn(&hso_dev->usb->dev,
+                               "%s failed mux_bulk_rx_urb[%d] %d\n", __func__,
+                               i, result);
+       }
+
+       return result;
+}
+
+static int hso_stop_net_device(struct hso_device *hso_dev)
+{
+       int i;
+       struct hso_net *hso_net = dev2net(hso_dev);
+
+       if (!hso_net)
+               return -ENODEV;
+
+       for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+               if (hso_net->mux_bulk_rx_urb_pool[i])
+                       usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]);
+
+       }
+       if (hso_net->mux_bulk_tx_urb)
+               usb_kill_urb(hso_net->mux_bulk_tx_urb);
+
+       return 0;
+}
+
+static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags)
+{
+       int i, result = 0;
+       struct hso_serial *serial = dev2ser(hso_dev);
+
+       if (!serial)
+               return -ENODEV;
+
+       /* If it is not the MUX port fill in and submit a bulk urb (already
+        * allocated in hso_serial_start) */
+       if (!(serial->parent->port_spec & HSO_INTF_MUX)) {
+               for (i = 0; i < serial->num_rx_urbs; i++) {
+                       usb_fill_bulk_urb(serial->rx_urb[i],
+                                         serial->parent->usb,
+                                         usb_rcvbulkpipe(serial->parent->usb,
+                                                         serial->in_endp->
+                                                         bEndpointAddress &
+                                                         0x7F),
+                                         serial->rx_data[i],
+                                         serial->rx_data_length,
+                                         hso_std_serial_read_bulk_callback,
+                                         serial);
+                       result = usb_submit_urb(serial->rx_urb[i], flags);
+                       if (result) {
+                               dev_warn(&serial->parent->usb->dev,
+                                        "Failed to submit urb - res %d\n",
+                                        result);
+                               break;
+                       }
+               }
+       } else {
+               mutex_lock(&serial->shared_int->shared_int_lock);
+               if (!serial->shared_int->use_count) {
+                       result =
+                           hso_mux_submit_intr_urb(serial->shared_int,
+                                                   hso_dev->usb, flags);
+               }
+               serial->shared_int->use_count++;
+               mutex_unlock(&serial->shared_int->shared_int_lock);
+       }
+       if (serial->tiocmget)
+               tiocmget_submit_urb(serial,
+                                   serial->tiocmget,
+                                   serial->parent->usb);
+       return result;
+}
+
+static int hso_stop_serial_device(struct hso_device *hso_dev)
+{
+       int i;
+       struct hso_serial *serial = dev2ser(hso_dev);
+       struct hso_tiocmget  *tiocmget;
+
+       if (!serial)
+               return -ENODEV;
+
+       for (i = 0; i < serial->num_rx_urbs; i++) {
+               if (serial->rx_urb[i]) {
+                       usb_kill_urb(serial->rx_urb[i]);
+                       serial->rx_urb_filled[i] = 0;
+               }
+       }
+       serial->curr_rx_urb_idx = 0;
+
+       if (serial->tx_urb)
+               usb_kill_urb(serial->tx_urb);
+
+       if (serial->shared_int) {
+               mutex_lock(&serial->shared_int->shared_int_lock);
+               if (serial->shared_int->use_count &&
+                   (--serial->shared_int->use_count == 0)) {
+                       struct urb *urb;
+
+                       urb = serial->shared_int->shared_intr_urb;
+                       if (urb)
+                               usb_kill_urb(urb);
+               }
+               mutex_unlock(&serial->shared_int->shared_int_lock);
+       }
+       tiocmget = serial->tiocmget;
+       if (tiocmget) {
+               wake_up_interruptible(&tiocmget->waitq);
+               usb_kill_urb(tiocmget->urb);
+       }
+
+       return 0;
+}
+
+static void hso_serial_tty_unregister(struct hso_serial *serial)
+{
+       tty_unregister_device(tty_drv, serial->minor);
+}
+
+static void hso_serial_common_free(struct hso_serial *serial)
+{
+       int i;
+
+       for (i = 0; i < serial->num_rx_urbs; i++) {
+               /* unlink and free RX URB */
+               usb_free_urb(serial->rx_urb[i]);
+               /* free the RX buffer */
+               kfree(serial->rx_data[i]);
+       }
+
+       /* unlink and free TX URB */
+       usb_free_urb(serial->tx_urb);
+       kfree(serial->tx_buffer);
+       kfree(serial->tx_data);
+       tty_port_destroy(&serial->port);
+}
+
+static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
+                                   int rx_size, int tx_size)
+{
+       struct device *dev;
+       int minor;
+       int i;
+
+       tty_port_init(&serial->port);
+
+       minor = get_free_serial_index();
+       if (minor < 0)
+               goto exit;
+
+       /* register our minor number */
+       serial->parent->dev = tty_port_register_device_attr(&serial->port,
+                       tty_drv, minor, &serial->parent->interface->dev,
+                       serial->parent, hso_serial_dev_groups);
+       dev = serial->parent->dev;
+
+       /* fill in specific data for later use */
+       serial->minor = minor;
+       serial->magic = HSO_SERIAL_MAGIC;
+       spin_lock_init(&serial->serial_lock);
+       serial->num_rx_urbs = num_urbs;
+
+       /* RX, allocate urb and initialize */
+
+       /* prepare our RX buffer */
+       serial->rx_data_length = rx_size;
+       for (i = 0; i < serial->num_rx_urbs; i++) {
+               serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
+               if (!serial->rx_urb[i]) {
+                       dev_err(dev, "Could not allocate urb?\n");
+                       goto exit;
+               }
+               serial->rx_urb[i]->transfer_buffer = NULL;
+               serial->rx_urb[i]->transfer_buffer_length = 0;
+               serial->rx_data[i] = kzalloc(serial->rx_data_length,
+                                            GFP_KERNEL);
+               if (!serial->rx_data[i])
+                       goto exit;
+       }
+
+       /* TX, allocate urb and initialize */
+       serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+       if (!serial->tx_urb) {
+               dev_err(dev, "Could not allocate urb?\n");
+               goto exit;
+       }
+       serial->tx_urb->transfer_buffer = NULL;
+       serial->tx_urb->transfer_buffer_length = 0;
+       /* prepare our TX buffer */
+       serial->tx_data_count = 0;
+       serial->tx_buffer_count = 0;
+       serial->tx_data_length = tx_size;
+       serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
+       if (!serial->tx_data)
+               goto exit;
+
+       serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
+       if (!serial->tx_buffer)
+               goto exit;
+
+       return 0;
+exit:
+       hso_serial_tty_unregister(serial);
+       hso_serial_common_free(serial);
+       return -1;
+}
+
+/* Creates a general hso device */
+static struct hso_device *hso_create_device(struct usb_interface *intf,
+                                           int port_spec)
+{
+       struct hso_device *hso_dev;
+
+       hso_dev = kzalloc(sizeof(*hso_dev), GFP_ATOMIC);
+       if (!hso_dev)
+               return NULL;
+
+       hso_dev->port_spec = port_spec;
+       hso_dev->usb = interface_to_usbdev(intf);
+       hso_dev->interface = intf;
+       kref_init(&hso_dev->ref);
+       mutex_init(&hso_dev->mutex);
+
+       INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
+       INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
+
+       return hso_dev;
+}
+
+/* Removes a network device in the network device table */
+static int remove_net_device(struct hso_device *hso_dev)
+{
+       int i;
+
+       for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+               if (network_table[i] == hso_dev) {
+                       network_table[i] = NULL;
+                       break;
+               }
+       }
+       if (i == HSO_MAX_NET_DEVICES)
+               return -1;
+       return 0;
+}
+
+/* Frees our network device */
+static void hso_free_net_device(struct hso_device *hso_dev)
+{
+       int i;
+       struct hso_net *hso_net = dev2net(hso_dev);
+
+       if (!hso_net)
+               return;
+
+       remove_net_device(hso_net->parent);
+
+       if (hso_net->net)
+               unregister_netdev(hso_net->net);
+
+       /* start freeing */
+       for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+               usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
+               kfree(hso_net->mux_bulk_rx_buf_pool[i]);
+               hso_net->mux_bulk_rx_buf_pool[i] = NULL;
+       }
+       usb_free_urb(hso_net->mux_bulk_tx_urb);
+       kfree(hso_net->mux_bulk_tx_buf);
+       hso_net->mux_bulk_tx_buf = NULL;
+
+       if (hso_net->net)
+               free_netdev(hso_net->net);
+
+       kfree(hso_dev);
+}
+
+static const struct net_device_ops hso_netdev_ops = {
+       .ndo_open       = hso_net_open,
+       .ndo_stop       = hso_net_close,
+       .ndo_start_xmit = hso_net_start_xmit,
+       .ndo_tx_timeout = hso_net_tx_timeout,
+};
+
+/* initialize the network interface */
+static void hso_net_init(struct net_device *net)
+{
+       struct hso_net *hso_net = netdev_priv(net);
+
+       D1("sizeof hso_net is %d", (int)sizeof(*hso_net));
+
+       /* fill in the other fields */
+       net->netdev_ops = &hso_netdev_ops;
+       net->watchdog_timeo = HSO_NET_TX_TIMEOUT;
+       net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
+       net->type = ARPHRD_NONE;
+       net->mtu = DEFAULT_MTU - 14;
+       net->tx_queue_len = 10;
+       net->ethtool_ops = &ops;
+
+       /* and initialize the semaphore */
+       spin_lock_init(&hso_net->net_lock);
+}
+
+/* Adds a network device in the network device table */
+static int add_net_device(struct hso_device *hso_dev)
+{
+       int i;
+
+       for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+               if (network_table[i] == NULL) {
+                       network_table[i] = hso_dev;
+                       break;
+               }
+       }
+       if (i == HSO_MAX_NET_DEVICES)
+               return -1;
+       return 0;
+}
+
+static int hso_rfkill_set_block(void *data, bool blocked)
+{
+       struct hso_device *hso_dev = data;
+       int enabled = !blocked;
+       int rv;
+
+       mutex_lock(&hso_dev->mutex);
+       if (hso_dev->usb_gone)
+               rv = 0;
+       else
+               rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0),
+                                      enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
+                                      USB_CTRL_SET_TIMEOUT);
+       mutex_unlock(&hso_dev->mutex);
+       return rv;
+}
+
+static const struct rfkill_ops hso_rfkill_ops = {
+       .set_block = hso_rfkill_set_block,
+};
+
+/* Creates and sets up everything for rfkill */
+static void hso_create_rfkill(struct hso_device *hso_dev,
+                            struct usb_interface *interface)
+{
+       struct hso_net *hso_net = dev2net(hso_dev);
+       struct device *dev = &hso_net->net->dev;
+       static u32 rfkill_counter;
+
+       snprintf(hso_net->name, sizeof(hso_net->name), "hso-%d",
+                rfkill_counter++);
+
+       hso_net->rfkill = rfkill_alloc(hso_net->name,
+                                      &interface_to_usbdev(interface)->dev,
+                                      RFKILL_TYPE_WWAN,
+                                      &hso_rfkill_ops, hso_dev);
+       if (!hso_net->rfkill) {
+               dev_err(dev, "%s - Out of memory\n", __func__);
+               return;
+       }
+       if (rfkill_register(hso_net->rfkill) < 0) {
+               rfkill_destroy(hso_net->rfkill);
+               hso_net->rfkill = NULL;
+               dev_err(dev, "%s - Failed to register rfkill\n", __func__);
+               return;
+       }
+}
+
+static struct device_type hso_type = {
+       .name   = "wwan",
+};
+
+/* Creates our network device */
+static struct hso_device *hso_create_net_device(struct usb_interface *interface,
+                                               int port_spec)
+{
+       int result, i;
+       struct net_device *net;
+       struct hso_net *hso_net;
+       struct hso_device *hso_dev;
+
+       hso_dev = hso_create_device(interface, port_spec);
+       if (!hso_dev)
+               return NULL;
+
+       /* allocate our network device, then we can put in our private data */
+       /* call hso_net_init to do the basic initialization */
+       net = alloc_netdev(sizeof(struct hso_net), "hso%d", NET_NAME_UNKNOWN,
+                          hso_net_init);
+       if (!net) {
+               dev_err(&interface->dev, "Unable to create ethernet device\n");
+               goto exit;
+       }
+
+       hso_net = netdev_priv(net);
+
+       hso_dev->port_data.dev_net = hso_net;
+       hso_net->net = net;
+       hso_net->parent = hso_dev;
+
+       hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
+                                     USB_DIR_IN);
+       if (!hso_net->in_endp) {
+               dev_err(&interface->dev, "Can't find BULK IN endpoint\n");
+               goto exit;
+       }
+       hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
+                                      USB_DIR_OUT);
+       if (!hso_net->out_endp) {
+               dev_err(&interface->dev, "Can't find BULK OUT endpoint\n");
+               goto exit;
+       }
+       SET_NETDEV_DEV(net, &interface->dev);
+       SET_NETDEV_DEVTYPE(net, &hso_type);
+
+       /* registering our net device */
+       result = register_netdev(net);
+       if (result) {
+               dev_err(&interface->dev, "Failed to register device\n");
+               goto exit;
+       }
+
+       /* start allocating */
+       for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+               hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
+               if (!hso_net->mux_bulk_rx_urb_pool[i]) {
+                       dev_err(&interface->dev, "Could not allocate rx urb\n");
+                       goto exit;
+               }
+               hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE,
+                                                          GFP_KERNEL);
+               if (!hso_net->mux_bulk_rx_buf_pool[i])
+                       goto exit;
+       }
+       hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+       if (!hso_net->mux_bulk_tx_urb) {
+               dev_err(&interface->dev, "Could not allocate tx urb\n");
+               goto exit;
+       }
+       hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL);
+       if (!hso_net->mux_bulk_tx_buf)
+               goto exit;
+
+       add_net_device(hso_dev);
+
+       hso_log_port(hso_dev);
+
+       hso_create_rfkill(hso_dev, interface);
+
+       return hso_dev;
+exit:
+       hso_free_net_device(hso_dev);
+       return NULL;
+}
+
+static void hso_free_tiomget(struct hso_serial *serial)
+{
+       struct hso_tiocmget *tiocmget;
+       if (!serial)
+               return;
+       tiocmget = serial->tiocmget;
+       if (tiocmget) {
+               usb_free_urb(tiocmget->urb);
+               tiocmget->urb = NULL;
+               serial->tiocmget = NULL;
+               kfree(tiocmget);
+       }
+}
+
+/* Frees an AT channel ( goes for both mux and non-mux ) */
+static void hso_free_serial_device(struct hso_device *hso_dev)
+{
+       struct hso_serial *serial = dev2ser(hso_dev);
+
+       if (!serial)
+               return;
+
+       hso_serial_common_free(serial);
+
+       if (serial->shared_int) {
+               mutex_lock(&serial->shared_int->shared_int_lock);
+               if (--serial->shared_int->ref_count == 0)
+                       hso_free_shared_int(serial->shared_int);
+               else
+                       mutex_unlock(&serial->shared_int->shared_int_lock);
+       }
+       hso_free_tiomget(serial);
+       kfree(serial);
+       kfree(hso_dev);
+}
+
+/* Creates a bulk AT channel */
+static struct hso_device *hso_create_bulk_serial_device(
+                       struct usb_interface *interface, int port)
+{
+       struct hso_device *hso_dev;
+       struct hso_serial *serial;
+       int num_urbs;
+       struct hso_tiocmget *tiocmget;
+
+       hso_dev = hso_create_device(interface, port);
+       if (!hso_dev)
+               return NULL;
+
+       serial = kzalloc(sizeof(*serial), GFP_KERNEL);
+       if (!serial)
+               goto exit;
+
+       serial->parent = hso_dev;
+       hso_dev->port_data.dev_serial = serial;
+
+       if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) {
+               num_urbs = 2;
+               serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
+                                          GFP_KERNEL);
+               /* it isn't going to break our heart if serial->tiocmget
+                *  allocation fails don't bother checking this.
+                */
+               if (serial->tiocmget) {
+                       tiocmget = serial->tiocmget;
+                       tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
+                       if (tiocmget->urb) {
+                               mutex_init(&tiocmget->mutex);
+                               init_waitqueue_head(&tiocmget->waitq);
+                               tiocmget->endp = hso_get_ep(
+                                       interface,
+                                       USB_ENDPOINT_XFER_INT,
+                                       USB_DIR_IN);
+                       } else
+                               hso_free_tiomget(serial);
+               }
+       }
+       else
+               num_urbs = 1;
+
+       if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE,
+                                    BULK_URB_TX_SIZE))
+               goto exit;
+
+       serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
+                                    USB_DIR_IN);
+       if (!serial->in_endp) {
+               dev_err(&interface->dev, "Failed to find BULK IN ep\n");
+               goto exit2;
+       }
+
+       if (!
+           (serial->out_endp =
+            hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) {
+               dev_err(&interface->dev, "Failed to find BULK IN ep\n");
+               goto exit2;
+       }
+
+       serial->write_data = hso_std_serial_write_data;
+
+       /* and record this serial */
+       set_serial_by_index(serial->minor, serial);
+
+       /* setup the proc dirs and files if needed */
+       hso_log_port(hso_dev);
+
+       /* done, return it */
+       return hso_dev;
+
+exit2:
+       hso_serial_tty_unregister(serial);
+       hso_serial_common_free(serial);
+exit:
+       hso_free_tiomget(serial);
+       kfree(serial);
+       kfree(hso_dev);
+       return NULL;
+}
+
+/* Creates a multiplexed AT channel */
+static
+struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface,
+                                               int port,
+                                               struct hso_shared_int *mux)
+{
+       struct hso_device *hso_dev;
+       struct hso_serial *serial;
+       int port_spec;
+
+       port_spec = HSO_INTF_MUX;
+       port_spec &= ~HSO_PORT_MASK;
+
+       port_spec |= hso_mux_to_port(port);
+       if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT)
+               return NULL;
+
+       hso_dev = hso_create_device(interface, port_spec);
+       if (!hso_dev)
+               return NULL;
+
+       serial = kzalloc(sizeof(*serial), GFP_KERNEL);
+       if (!serial)
+               goto exit;
+
+       hso_dev->port_data.dev_serial = serial;
+       serial->parent = hso_dev;
+
+       if (hso_serial_common_create
+           (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
+               goto exit;
+
+       serial->tx_data_length--;
+       serial->write_data = hso_mux_serial_write_data;
+
+       serial->shared_int = mux;
+       mutex_lock(&serial->shared_int->shared_int_lock);
+       serial->shared_int->ref_count++;
+       mutex_unlock(&serial->shared_int->shared_int_lock);
+
+       /* and record this serial */
+       set_serial_by_index(serial->minor, serial);
+
+       /* setup the proc dirs and files if needed */
+       hso_log_port(hso_dev);
+
+       /* done, return it */
+       return hso_dev;
+
+exit:
+       if (serial) {
+               tty_unregister_device(tty_drv, serial->minor);
+               kfree(serial);
+       }
+       kfree(hso_dev);
+       return NULL;
+
+}
+
+static void hso_free_shared_int(struct hso_shared_int *mux)
+{
+       usb_free_urb(mux->shared_intr_urb);
+       kfree(mux->shared_intr_buf);
+       mutex_unlock(&mux->shared_int_lock);
+       kfree(mux);
+}
+
+static
+struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface)
+{
+       struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+
+       if (!mux)
+               return NULL;
+
+       mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT,
+                                   USB_DIR_IN);
+       if (!mux->intr_endp) {
+               dev_err(&interface->dev, "Can't find INT IN endpoint\n");
+               goto exit;
+       }
+
+       mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+       if (!mux->shared_intr_urb) {
+               dev_err(&interface->dev, "Could not allocate intr urb?\n");
+               goto exit;
+       }
+       mux->shared_intr_buf =
+               kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize),
+                       GFP_KERNEL);
+       if (!mux->shared_intr_buf)
+               goto exit;
+
+       mutex_init(&mux->shared_int_lock);
+
+       return mux;
+
+exit:
+       kfree(mux->shared_intr_buf);
+       usb_free_urb(mux->shared_intr_urb);
+       kfree(mux);
+       return NULL;
+}
+
+/* Gets the port spec for a certain interface */
+static int hso_get_config_data(struct usb_interface *interface)
+{
+       struct usb_device *usbdev = interface_to_usbdev(interface);
+       u8 *config_data = kmalloc(17, GFP_KERNEL);
+       u32 if_num = interface->cur_altsetting->desc.bInterfaceNumber;
+       s32 result;
+
+       if (!config_data)
+               return -ENOMEM;
+       if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
+                           0x86, 0xC0, 0, 0, config_data, 17,
+                           USB_CTRL_SET_TIMEOUT) != 0x11) {
+               kfree(config_data);
+               return -EIO;
+       }
+
+       switch (config_data[if_num]) {
+       case 0x0:
+               result = 0;
+               break;
+       case 0x1:
+               result = HSO_PORT_DIAG;
+               break;
+       case 0x2:
+               result = HSO_PORT_GPS;
+               break;
+       case 0x3:
+               result = HSO_PORT_GPS_CONTROL;
+               break;
+       case 0x4:
+               result = HSO_PORT_APP;
+               break;
+       case 0x5:
+               result = HSO_PORT_APP2;
+               break;
+       case 0x6:
+               result = HSO_PORT_CONTROL;
+               break;
+       case 0x7:
+               result = HSO_PORT_NETWORK;
+               break;
+       case 0x8:
+               result = HSO_PORT_MODEM;
+               break;
+       case 0x9:
+               result = HSO_PORT_MSD;
+               break;
+       case 0xa:
+               result = HSO_PORT_PCSC;
+               break;
+       case 0xb:
+               result = HSO_PORT_VOICE;
+               break;
+       default:
+               result = 0;
+       }
+
+       if (result)
+               result |= HSO_INTF_BULK;
+
+       if (config_data[16] & 0x1)
+               result |= HSO_INFO_CRC_BUG;
+
+       kfree(config_data);
+       return result;
+}
+
+/* called once for each interface upon device insertion */
+static int hso_probe(struct usb_interface *interface,
+                    const struct usb_device_id *id)
+{
+       int mux, i, if_num, port_spec;
+       unsigned char port_mask;
+       struct hso_device *hso_dev = NULL;
+       struct hso_shared_int *shared_int;
+       struct hso_device *tmp_dev = NULL;
+
+       if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) {
+               dev_err(&interface->dev, "Not our interface\n");
+               return -ENODEV;
+       }
+
+       if_num = interface->cur_altsetting->desc.bInterfaceNumber;
+
+       /* Get the interface/port specification from either driver_info or from
+        * the device itself */
+       if (id->driver_info)
+               port_spec = ((u32 *)(id->driver_info))[if_num];
+       else
+               port_spec = hso_get_config_data(interface);
+
+       /* Check if we need to switch to alt interfaces prior to port
+        * configuration */
+       if (interface->num_altsetting > 1)
+               usb_set_interface(interface_to_usbdev(interface), if_num, 1);
+       interface->needs_remote_wakeup = 1;
+
+       /* Allocate new hso device(s) */
+       switch (port_spec & HSO_INTF_MASK) {
+       case HSO_INTF_MUX:
+               if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+                       /* Create the network device */
+                       if (!disable_net) {
+                               hso_dev = hso_create_net_device(interface,
+                                                               port_spec);
+                               if (!hso_dev)
+                                       goto exit;
+                               tmp_dev = hso_dev;
+                       }
+               }
+
+               if (hso_get_mux_ports(interface, &port_mask))
+                       /* TODO: de-allocate everything */
+                       goto exit;
+
+               shared_int = hso_create_shared_int(interface);
+               if (!shared_int)
+                       goto exit;
+
+               for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) {
+                       if (port_mask & i) {
+                               hso_dev = hso_create_mux_serial_device(
+                                               interface, i, shared_int);
+                               if (!hso_dev)
+                                       goto exit;
+                       }
+               }
+
+               if (tmp_dev)
+                       hso_dev = tmp_dev;
+               break;
+
+       case HSO_INTF_BULK:
+               /* It's a regular bulk interface */
+               if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+                       if (!disable_net)
+                               hso_dev =
+                                   hso_create_net_device(interface, port_spec);
+               } else {
+                       hso_dev =
+                           hso_create_bulk_serial_device(interface, port_spec);
+               }
+               if (!hso_dev)
+                       goto exit;
+               break;
+       default:
+               goto exit;
+       }
+
+       /* save our data pointer in this device */
+       usb_set_intfdata(interface, hso_dev);
+
+       /* done */
+       return 0;
+exit:
+       hso_free_interface(interface);
+       return -ENODEV;
+}
+
+/* device removed, cleaning up */
+static void hso_disconnect(struct usb_interface *interface)
+{
+       hso_free_interface(interface);
+
+       /* remove reference of our private data */
+       usb_set_intfdata(interface, NULL);
+}
+
+static void async_get_intf(struct work_struct *data)
+{
+       struct hso_device *hso_dev =
+           container_of(data, struct hso_device, async_get_intf);
+       usb_autopm_get_interface(hso_dev->interface);
+}
+
+static void async_put_intf(struct work_struct *data)
+{
+       struct hso_device *hso_dev =
+           container_of(data, struct hso_device, async_put_intf);
+       usb_autopm_put_interface(hso_dev->interface);
+}
+
+static int hso_get_activity(struct hso_device *hso_dev)
+{
+       if (hso_dev->usb->state == USB_STATE_SUSPENDED) {
+               if (!hso_dev->is_active) {
+                       hso_dev->is_active = 1;
+                       schedule_work(&hso_dev->async_get_intf);
+               }
+       }
+
+       if (hso_dev->usb->state != USB_STATE_CONFIGURED)
+               return -EAGAIN;
+
+       usb_mark_last_busy(hso_dev->usb);
+
+       return 0;
+}
+
+static int hso_put_activity(struct hso_device *hso_dev)
+{
+       if (hso_dev->usb->state != USB_STATE_SUSPENDED) {
+               if (hso_dev->is_active) {
+                       hso_dev->is_active = 0;
+                       schedule_work(&hso_dev->async_put_intf);
+                       return -EAGAIN;
+               }
+       }
+       hso_dev->is_active = 0;
+       return 0;
+}
+
+/* called by kernel when we need to suspend device */
+static int hso_suspend(struct usb_interface *iface, pm_message_t message)
+{
+       int i, result;
+
+       /* Stop all serial ports */
+       for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
+               if (serial_table[i] && (serial_table[i]->interface == iface)) {
+                       result = hso_stop_serial_device(serial_table[i]);
+                       if (result)
+                               goto out;
+               }
+       }
+
+       /* Stop all network ports */
+       for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+               if (network_table[i] &&
+                   (network_table[i]->interface == iface)) {
+                       result = hso_stop_net_device(network_table[i]);
+                       if (result)
+                               goto out;
+               }
+       }
+
+out:
+       return 0;
+}
+
+/* called by kernel when we need to resume device */
+static int hso_resume(struct usb_interface *iface)
+{
+       int i, result = 0;
+       struct hso_net *hso_net;
+
+       /* Start all serial ports */
+       for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
+               if (serial_table[i] && (serial_table[i]->interface == iface)) {
+                       if (dev2ser(serial_table[i])->port.count) {
+                               result =
+                                   hso_start_serial_device(serial_table[i], GFP_NOIO);
+                               hso_kick_transmit(dev2ser(serial_table[i]));
+                               if (result)
+                                       goto out;
+                       }
+               }
+       }
+
+       /* Start all network ports */
+       for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+               if (network_table[i] &&
+                   (network_table[i]->interface == iface)) {
+                       hso_net = dev2net(network_table[i]);
+                       if (hso_net->flags & IFF_UP) {
+                               /* First transmit any lingering data,
+                                  then restart the device. */
+                               if (hso_net->skb_tx_buf) {
+                                       dev_dbg(&iface->dev,
+                                               "Transmitting"
+                                               " lingering data\n");
+                                       hso_net_start_xmit(hso_net->skb_tx_buf,
+                                                          hso_net->net);
+                                       hso_net->skb_tx_buf = NULL;
+                               }
+                               result = hso_start_net_device(network_table[i]);
+                               if (result)
+                                       goto out;
+                       }
+               }
+       }
+
+out:
+       return result;
+}
+
+static void hso_serial_ref_free(struct kref *ref)
+{
+       struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
+
+       hso_free_serial_device(hso_dev);
+}
+
+static void hso_free_interface(struct usb_interface *interface)
+{
+       struct hso_serial *serial;
+       int i;
+
+       for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
+               if (serial_table[i] &&
+                   (serial_table[i]->interface == interface)) {
+                       serial = dev2ser(serial_table[i]);
+                       tty_port_tty_hangup(&serial->port, false);
+                       mutex_lock(&serial->parent->mutex);
+                       serial->parent->usb_gone = 1;
+                       mutex_unlock(&serial->parent->mutex);
+                       cancel_work_sync(&serial_table[i]->async_put_intf);
+                       cancel_work_sync(&serial_table[i]->async_get_intf);
+                       hso_serial_tty_unregister(serial);
+                       kref_put(&serial_table[i]->ref, hso_serial_ref_free);
+                       set_serial_by_index(i, NULL);
+               }
+       }
+
+       for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+               if (network_table[i] &&
+                   (network_table[i]->interface == interface)) {
+                       struct rfkill *rfk = dev2net(network_table[i])->rfkill;
+                       /* hso_stop_net_device doesn't stop the net queue since
+                        * traffic needs to start it again when suspended */
+                       netif_stop_queue(dev2net(network_table[i])->net);
+                       hso_stop_net_device(network_table[i]);
+                       cancel_work_sync(&network_table[i]->async_put_intf);
+                       cancel_work_sync(&network_table[i]->async_get_intf);
+                       if (rfk) {
+                               rfkill_unregister(rfk);
+                               rfkill_destroy(rfk);
+                       }
+                       hso_free_net_device(network_table[i]);
+               }
+       }
+}
+
+/* Helper functions */
+
+/* Get the endpoint ! */
+static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
+                                                 int type, int dir)
+{
+       int i;
+       struct usb_host_interface *iface = intf->cur_altsetting;
+       struct usb_endpoint_descriptor *endp;
+
+       for (i = 0; i < iface->desc.bNumEndpoints; i++) {
+               endp = &iface->endpoint[i].desc;
+               if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) &&
+                   (usb_endpoint_type(endp) == type))
+                       return endp;
+       }
+
+       return NULL;
+}
+
+/* Get the byte that describes which ports are enabled */
+static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports)
+{
+       int i;
+       struct usb_host_interface *iface = intf->cur_altsetting;
+
+       if (iface->extralen == 3) {
+               *ports = iface->extra[2];
+               return 0;
+       }
+
+       for (i = 0; i < iface->desc.bNumEndpoints; i++) {
+               if (iface->endpoint[i].extralen == 3) {
+                       *ports = iface->endpoint[i].extra[2];
+                       return 0;
+               }
+       }
+
+       return -1;
+}
+
+/* interrupt urb needs to be submitted, used for serial read of muxed port */
+static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
+                                  struct usb_device *usb, gfp_t gfp)
+{
+       int result;
+
+       usb_fill_int_urb(shared_int->shared_intr_urb, usb,
+                        usb_rcvintpipe(usb,
+                               shared_int->intr_endp->bEndpointAddress & 0x7F),
+                        shared_int->shared_intr_buf,
+                        1,
+                        intr_callback, shared_int,
+                        shared_int->intr_endp->bInterval);
+
+       result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
+       if (result)
+               dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__,
+                       result);
+
+       return result;
+}
+
+/* operations setup of the serial interface */
+static const struct tty_operations hso_serial_ops = {
+       .open = hso_serial_open,
+       .close = hso_serial_close,
+       .write = hso_serial_write,
+       .write_room = hso_serial_write_room,
+       .cleanup = hso_serial_cleanup,
+       .ioctl = hso_serial_ioctl,
+       .set_termios = hso_serial_set_termios,
+       .chars_in_buffer = hso_serial_chars_in_buffer,
+       .tiocmget = hso_serial_tiocmget,
+       .tiocmset = hso_serial_tiocmset,
+       .get_icount = hso_get_count,
+       .unthrottle = hso_unthrottle
+};
+
+static struct usb_driver hso_driver = {
+       .name = driver_name,
+       .probe = hso_probe,
+       .disconnect = hso_disconnect,
+       .id_table = hso_ids,
+       .suspend = hso_suspend,
+       .resume = hso_resume,
+       .reset_resume = hso_resume,
+       .supports_autosuspend = 1,
+       .disable_hub_initiated_lpm = 1,
+};
+
+static int __init hso_init(void)
+{
+       int i;
+       int result;
+
+       /* put it in the log */
+       printk(KERN_INFO "hso: %s\n", version);
+
+       /* Initialise the serial table semaphore and table */
+       spin_lock_init(&serial_table_lock);
+       for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++)
+               serial_table[i] = NULL;
+
+       /* allocate our driver using the proper amount of supported minors */
+       tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS);
+       if (!tty_drv)
+               return -ENOMEM;
+
+       /* fill in all needed values */
+       tty_drv->driver_name = driver_name;
+       tty_drv->name = tty_filename;
+
+       /* if major number is provided as parameter, use that one */
+       if (tty_major)
+               tty_drv->major = tty_major;
+
+       tty_drv->minor_start = 0;
+       tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
+       tty_drv->subtype = SERIAL_TYPE_NORMAL;
+       tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+       tty_drv->init_termios = tty_std_termios;
+       hso_init_termios(&tty_drv->init_termios);
+       tty_set_operations(tty_drv, &hso_serial_ops);
+
+       /* register the tty driver */
+       result = tty_register_driver(tty_drv);
+       if (result) {
+               printk(KERN_ERR "%s - tty_register_driver failed(%d)\n",
+                       __func__, result);
+               goto err_free_tty;
+       }
+
+       /* register this module as an usb driver */
+       result = usb_register(&hso_driver);
+       if (result) {
+               printk(KERN_ERR "Could not register hso driver? error: %d\n",
+                       result);
+               goto err_unreg_tty;
+       }
+
+       /* done */
+       return 0;
+err_unreg_tty:
+       tty_unregister_driver(tty_drv);
+err_free_tty:
+       put_tty_driver(tty_drv);
+       return result;
+}
+
+static void __exit hso_exit(void)
+{
+       printk(KERN_INFO "hso: unloaded\n");
+
+       tty_unregister_driver(tty_drv);
+       put_tty_driver(tty_drv);
+       /* deregister the usb driver */
+       usb_deregister(&hso_driver);
+}
+
+/* Module definitions */
+module_init(hso_init);
+module_exit(hso_exit);
+
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_DESCRIPTION(MOD_DESCRIPTION);
+MODULE_LICENSE(MOD_LICENSE);
+
+/* change the debug level (eg: insmod hso.ko debug=0x04) */
+MODULE_PARM_DESC(debug, "Level of debug [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
+module_param(debug, int, S_IRUGO | S_IWUSR);
+
+/* set the major tty number (eg: insmod hso.ko tty_major=245) */
+MODULE_PARM_DESC(tty_major, "Set the major tty number");
+module_param(tty_major, int, S_IRUGO | S_IWUSR);
+
+/* disable network interface (eg: insmod hso.ko disable_net=1) */
+MODULE_PARM_DESC(disable_net, "Disable the network interface");
+module_param(disable_net, int, S_IRUGO | S_IWUSR);