Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / usb / cdc_mbim.c
diff --git a/kernel/drivers/net/usb/cdc_mbim.c b/kernel/drivers/net/usb/cdc_mbim.c
new file mode 100644 (file)
index 0000000..e4b7a47
--- /dev/null
@@ -0,0 +1,625 @@
+/*
+ * Copyright (c) 2012  Smith Micro Software, Inc.
+ * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
+ *
+ * This driver is based on and reuse most of cdc_ncm, which is
+ * Copyright (C) ST-Ericsson 2010-2012
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/usb/cdc-wdm.h>
+#include <linux/usb/cdc_ncm.h>
+#include <net/ipv6.h>
+#include <net/addrconf.h>
+
+/* alternative VLAN for IP session 0 if not untagged */
+#define MBIM_IPS0_VID  4094
+
+/* driver specific data - must match cdc_ncm usage */
+struct cdc_mbim_state {
+       struct cdc_ncm_ctx *ctx;
+       atomic_t pmcount;
+       struct usb_driver *subdriver;
+       unsigned long _unused;
+       unsigned long flags;
+};
+
+/* flags for the cdc_mbim_state.flags field */
+enum cdc_mbim_flags {
+       FLAG_IPS0_VLAN = 1 << 0,        /* IP session 0 is tagged  */
+};
+
+/* using a counter to merge subdriver requests with our own into a combined state */
+static int cdc_mbim_manage_power(struct usbnet *dev, int on)
+{
+       struct cdc_mbim_state *info = (void *)&dev->data;
+       int rv = 0;
+
+       dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(&info->pmcount), on);
+
+       if ((on && atomic_add_return(1, &info->pmcount) == 1) || (!on && atomic_dec_and_test(&info->pmcount))) {
+               /* need autopm_get/put here to ensure the usbcore sees the new value */
+               rv = usb_autopm_get_interface(dev->intf);
+               dev->intf->needs_remote_wakeup = on;
+               if (!rv)
+                       usb_autopm_put_interface(dev->intf);
+       }
+       return 0;
+}
+
+static int cdc_mbim_wdm_manage_power(struct usb_interface *intf, int status)
+{
+       struct usbnet *dev = usb_get_intfdata(intf);
+
+       /* can be called while disconnecting */
+       if (!dev)
+               return 0;
+
+       return cdc_mbim_manage_power(dev, status);
+}
+
+static int cdc_mbim_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+       struct cdc_mbim_state *info = (void *)&dev->data;
+
+       /* creation of this VLAN is a request to tag IP session 0 */
+       if (vid == MBIM_IPS0_VID)
+               info->flags |= FLAG_IPS0_VLAN;
+       else
+               if (vid >= 512) /* we don't map these to MBIM session */
+                       return -EINVAL;
+       return 0;
+}
+
+static int cdc_mbim_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+       struct cdc_mbim_state *info = (void *)&dev->data;
+
+       /* this is a request for an untagged IP session 0 */
+       if (vid == MBIM_IPS0_VID)
+               info->flags &= ~FLAG_IPS0_VLAN;
+       return 0;
+}
+
+static const struct net_device_ops cdc_mbim_netdev_ops = {
+       .ndo_open             = usbnet_open,
+       .ndo_stop             = usbnet_stop,
+       .ndo_start_xmit       = usbnet_start_xmit,
+       .ndo_tx_timeout       = usbnet_tx_timeout,
+       .ndo_change_mtu       = usbnet_change_mtu,
+       .ndo_set_mac_address  = eth_mac_addr,
+       .ndo_validate_addr    = eth_validate_addr,
+       .ndo_vlan_rx_add_vid  = cdc_mbim_rx_add_vid,
+       .ndo_vlan_rx_kill_vid = cdc_mbim_rx_kill_vid,
+};
+
+/* Change the control interface altsetting and update the .driver_info
+ * pointer if the matching entry after changing class codes points to
+ * a different struct
+ */
+static int cdc_mbim_set_ctrlalt(struct usbnet *dev, struct usb_interface *intf, u8 alt)
+{
+       struct usb_driver *driver = to_usb_driver(intf->dev.driver);
+       const struct usb_device_id *id;
+       struct driver_info *info;
+       int ret;
+
+       ret = usb_set_interface(dev->udev,
+                               intf->cur_altsetting->desc.bInterfaceNumber,
+                               alt);
+       if (ret)
+               return ret;
+
+       id = usb_match_id(intf, driver->id_table);
+       if (!id)
+               return -ENODEV;
+
+       info = (struct driver_info *)id->driver_info;
+       if (info != dev->driver_info) {
+               dev_dbg(&intf->dev, "driver_info updated to '%s'\n",
+                       info->description);
+               dev->driver_info = info;
+       }
+       return 0;
+}
+
+static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+       struct cdc_ncm_ctx *ctx;
+       struct usb_driver *subdriver = ERR_PTR(-ENODEV);
+       int ret = -ENODEV;
+       u8 data_altsetting = 1;
+       struct cdc_mbim_state *info = (void *)&dev->data;
+
+       /* should we change control altsetting on a NCM/MBIM function? */
+       if (cdc_ncm_select_altsetting(intf) == CDC_NCM_COMM_ALTSETTING_MBIM) {
+               data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM;
+               ret = cdc_mbim_set_ctrlalt(dev, intf, CDC_NCM_COMM_ALTSETTING_MBIM);
+               if (ret)
+                       goto err;
+               ret = -ENODEV;
+       }
+
+       /* we will hit this for NCM/MBIM functions if prefer_mbim is false */
+       if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
+               goto err;
+
+       ret = cdc_ncm_bind_common(dev, intf, data_altsetting);
+       if (ret)
+               goto err;
+
+       ctx = info->ctx;
+
+       /* The MBIM descriptor and the status endpoint are required */
+       if (ctx->mbim_desc && dev->status)
+               subdriver = usb_cdc_wdm_register(ctx->control,
+                                                &dev->status->desc,
+                                                le16_to_cpu(ctx->mbim_desc->wMaxControlMessage),
+                                                cdc_mbim_wdm_manage_power);
+       if (IS_ERR(subdriver)) {
+               ret = PTR_ERR(subdriver);
+               cdc_ncm_unbind(dev, intf);
+               goto err;
+       }
+
+       /* can't let usbnet use the interrupt endpoint */
+       dev->status = NULL;
+       info->subdriver = subdriver;
+
+       /* MBIM cannot do ARP */
+       dev->net->flags |= IFF_NOARP;
+
+       /* no need to put the VLAN tci in the packet headers */
+       dev->net->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_FILTER;
+
+       /* monitor VLAN additions and removals */
+       dev->net->netdev_ops = &cdc_mbim_netdev_ops;
+err:
+       return ret;
+}
+
+static void cdc_mbim_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+       struct cdc_mbim_state *info = (void *)&dev->data;
+       struct cdc_ncm_ctx *ctx = info->ctx;
+
+       /* disconnect subdriver from control interface */
+       if (info->subdriver && info->subdriver->disconnect)
+               info->subdriver->disconnect(ctx->control);
+       info->subdriver = NULL;
+
+       /* let NCM unbind clean up both control and data interface */
+       cdc_ncm_unbind(dev, intf);
+}
+
+/* verify that the ethernet protocol is IPv4 or IPv6 */
+static bool is_ip_proto(__be16 proto)
+{
+       switch (proto) {
+       case htons(ETH_P_IP):
+       case htons(ETH_P_IPV6):
+               return true;
+       }
+       return false;
+}
+
+static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+       struct sk_buff *skb_out;
+       struct cdc_mbim_state *info = (void *)&dev->data;
+       struct cdc_ncm_ctx *ctx = info->ctx;
+       __le32 sign = cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN);
+       u16 tci = 0;
+       bool is_ip;
+       u8 *c;
+
+       if (!ctx)
+               goto error;
+
+       if (skb) {
+               if (skb->len <= ETH_HLEN)
+                       goto error;
+
+               /* Some applications using e.g. packet sockets will
+                * bypass the VLAN acceleration and create tagged
+                * ethernet frames directly.  We primarily look for
+                * the accelerated out-of-band tag, but fall back if
+                * required
+                */
+               skb_reset_mac_header(skb);
+               if (vlan_get_tag(skb, &tci) < 0 && skb->len > VLAN_ETH_HLEN &&
+                   __vlan_get_tag(skb, &tci) == 0) {
+                       is_ip = is_ip_proto(vlan_eth_hdr(skb)->h_vlan_encapsulated_proto);
+                       skb_pull(skb, VLAN_ETH_HLEN);
+               } else {
+                       is_ip = is_ip_proto(eth_hdr(skb)->h_proto);
+                       skb_pull(skb, ETH_HLEN);
+               }
+
+               /* Is IP session <0> tagged too? */
+               if (info->flags & FLAG_IPS0_VLAN) {
+                       /* drop all untagged packets */
+                       if (!tci)
+                               goto error;
+                       /* map MBIM_IPS0_VID to IPS<0> */
+                       if (tci == MBIM_IPS0_VID)
+                               tci = 0;
+               }
+
+               /* mapping VLANs to MBIM sessions:
+                *   no tag     => IPS session <0> if !FLAG_IPS0_VLAN
+                *   1 - 255    => IPS session <vlanid>
+                *   256 - 511  => DSS session <vlanid - 256>
+                *   512 - 4093 => unsupported, drop
+                *   4094       => IPS session <0> if FLAG_IPS0_VLAN
+                */
+
+               switch (tci & 0x0f00) {
+               case 0x0000: /* VLAN ID 0 - 255 */
+                       if (!is_ip)
+                               goto error;
+                       c = (u8 *)&sign;
+                       c[3] = tci;
+                       break;
+               case 0x0100: /* VLAN ID 256 - 511 */
+                       if (is_ip)
+                               goto error;
+                       sign = cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN);
+                       c = (u8 *)&sign;
+                       c[3] = tci;
+                       break;
+               default:
+                       netif_err(dev, tx_err, dev->net,
+                                 "unsupported tci=0x%04x\n", tci);
+                       goto error;
+               }
+       }
+
+       spin_lock_bh(&ctx->mtx);
+       skb_out = cdc_ncm_fill_tx_frame(dev, skb, sign);
+       spin_unlock_bh(&ctx->mtx);
+       return skb_out;
+
+error:
+       if (skb)
+               dev_kfree_skb_any(skb);
+
+       return NULL;
+}
+
+/* Some devices are known to send Neigbor Solicitation messages and
+ * require Neigbor Advertisement replies.  The IPv6 core will not
+ * respond since IFF_NOARP is set, so we must handle them ourselves.
+ */
+static void do_neigh_solicit(struct usbnet *dev, u8 *buf, u16 tci)
+{
+       struct ipv6hdr *iph = (void *)buf;
+       struct nd_msg *msg = (void *)(iph + 1);
+       struct net_device *netdev;
+       struct inet6_dev *in6_dev;
+       bool is_router;
+
+       /* we'll only respond to requests from unicast addresses to
+        * our solicited node addresses.
+        */
+       if (!ipv6_addr_is_solict_mult(&iph->daddr) ||
+           !(ipv6_addr_type(&iph->saddr) & IPV6_ADDR_UNICAST))
+               return;
+
+       /* need to send the NA on the VLAN dev, if any */
+       rcu_read_lock();
+       if (tci) {
+               netdev = __vlan_find_dev_deep_rcu(dev->net, htons(ETH_P_8021Q),
+                                                 tci);
+               if (!netdev) {
+                       rcu_read_unlock();
+                       return;
+               }
+       } else {
+               netdev = dev->net;
+       }
+       dev_hold(netdev);
+       rcu_read_unlock();
+
+       in6_dev = in6_dev_get(netdev);
+       if (!in6_dev)
+               goto out;
+       is_router = !!in6_dev->cnf.forwarding;
+       in6_dev_put(in6_dev);
+
+       /* ipv6_stub != NULL if in6_dev_get returned an inet6_dev */
+       ipv6_stub->ndisc_send_na(netdev, NULL, &iph->saddr, &msg->target,
+                                is_router /* router */,
+                                true /* solicited */,
+                                false /* override */,
+                                true /* inc_opt */);
+out:
+       dev_put(netdev);
+}
+
+static bool is_neigh_solicit(u8 *buf, size_t len)
+{
+       struct ipv6hdr *iph = (void *)buf;
+       struct nd_msg *msg = (void *)(iph + 1);
+
+       return (len >= sizeof(struct ipv6hdr) + sizeof(struct nd_msg) &&
+               iph->nexthdr == IPPROTO_ICMPV6 &&
+               msg->icmph.icmp6_code == 0 &&
+               msg->icmph.icmp6_type == NDISC_NEIGHBOUR_SOLICITATION);
+}
+
+
+static struct sk_buff *cdc_mbim_process_dgram(struct usbnet *dev, u8 *buf, size_t len, u16 tci)
+{
+       __be16 proto = htons(ETH_P_802_3);
+       struct sk_buff *skb = NULL;
+
+       if (tci < 256 || tci == MBIM_IPS0_VID) { /* IPS session? */
+               if (len < sizeof(struct iphdr))
+                       goto err;
+
+               switch (*buf & 0xf0) {
+               case 0x40:
+                       proto = htons(ETH_P_IP);
+                       break;
+               case 0x60:
+                       if (is_neigh_solicit(buf, len))
+                               do_neigh_solicit(dev, buf, tci);
+                       proto = htons(ETH_P_IPV6);
+                       break;
+               default:
+                       goto err;
+               }
+       }
+
+       skb = netdev_alloc_skb_ip_align(dev->net,  len + ETH_HLEN);
+       if (!skb)
+               goto err;
+
+       /* add an ethernet header */
+       skb_put(skb, ETH_HLEN);
+       skb_reset_mac_header(skb);
+       eth_hdr(skb)->h_proto = proto;
+       eth_zero_addr(eth_hdr(skb)->h_source);
+       memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
+
+       /* add datagram */
+       memcpy(skb_put(skb, len), buf, len);
+
+       /* map MBIM session to VLAN */
+       if (tci)
+               __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tci);
+err:
+       return skb;
+}
+
+static int cdc_mbim_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in)
+{
+       struct sk_buff *skb;
+       struct cdc_mbim_state *info = (void *)&dev->data;
+       struct cdc_ncm_ctx *ctx = info->ctx;
+       int len;
+       int nframes;
+       int x;
+       int offset;
+       struct usb_cdc_ncm_ndp16 *ndp16;
+       struct usb_cdc_ncm_dpe16 *dpe16;
+       int ndpoffset;
+       int loopcount = 50; /* arbitrary max preventing infinite loop */
+       u32 payload = 0;
+       u8 *c;
+       u16 tci;
+
+       ndpoffset = cdc_ncm_rx_verify_nth16(ctx, skb_in);
+       if (ndpoffset < 0)
+               goto error;
+
+next_ndp:
+       nframes = cdc_ncm_rx_verify_ndp16(skb_in, ndpoffset);
+       if (nframes < 0)
+               goto error;
+
+       ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb_in->data + ndpoffset);
+
+       switch (ndp16->dwSignature & cpu_to_le32(0x00ffffff)) {
+       case cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN):
+               c = (u8 *)&ndp16->dwSignature;
+               tci = c[3];
+               /* tag IPS<0> packets too if MBIM_IPS0_VID exists */
+               if (!tci && info->flags & FLAG_IPS0_VLAN)
+                       tci = MBIM_IPS0_VID;
+               break;
+       case cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN):
+               c = (u8 *)&ndp16->dwSignature;
+               tci = c[3] + 256;
+               break;
+       default:
+               netif_dbg(dev, rx_err, dev->net,
+                         "unsupported NDP signature <0x%08x>\n",
+                         le32_to_cpu(ndp16->dwSignature));
+               goto err_ndp;
+
+       }
+
+       dpe16 = ndp16->dpe16;
+       for (x = 0; x < nframes; x++, dpe16++) {
+               offset = le16_to_cpu(dpe16->wDatagramIndex);
+               len = le16_to_cpu(dpe16->wDatagramLength);
+
+               /*
+                * CDC NCM ch. 3.7
+                * All entries after first NULL entry are to be ignored
+                */
+               if ((offset == 0) || (len == 0)) {
+                       if (!x)
+                               goto err_ndp; /* empty NTB */
+                       break;
+               }
+
+               /* sanity checking */
+               if (((offset + len) > skb_in->len) || (len > ctx->rx_max)) {
+                       netif_dbg(dev, rx_err, dev->net,
+                                 "invalid frame detected (ignored) offset[%u]=%u, length=%u, skb=%p\n",
+                                 x, offset, len, skb_in);
+                       if (!x)
+                               goto err_ndp;
+                       break;
+               } else {
+                       skb = cdc_mbim_process_dgram(dev, skb_in->data + offset, len, tci);
+                       if (!skb)
+                               goto error;
+                       usbnet_skb_return(dev, skb);
+                       payload += len; /* count payload bytes in this NTB */
+               }
+       }
+err_ndp:
+       /* are there more NDPs to process? */
+       ndpoffset = le16_to_cpu(ndp16->wNextNdpIndex);
+       if (ndpoffset && loopcount--)
+               goto next_ndp;
+
+       /* update stats */
+       ctx->rx_overhead += skb_in->len - payload;
+       ctx->rx_ntbs++;
+
+       return 1;
+error:
+       return 0;
+}
+
+static int cdc_mbim_suspend(struct usb_interface *intf, pm_message_t message)
+{
+       int ret = -ENODEV;
+       struct usbnet *dev = usb_get_intfdata(intf);
+       struct cdc_mbim_state *info = (void *)&dev->data;
+       struct cdc_ncm_ctx *ctx = info->ctx;
+
+       if (!ctx)
+               goto error;
+
+       /*
+        * Both usbnet_suspend() and subdriver->suspend() MUST return 0
+        * in system sleep context, otherwise, the resume callback has
+        * to recover device from previous suspend failure.
+        */
+       ret = usbnet_suspend(intf, message);
+       if (ret < 0)
+               goto error;
+
+       if (intf == ctx->control && info->subdriver && info->subdriver->suspend)
+               ret = info->subdriver->suspend(intf, message);
+       if (ret < 0)
+               usbnet_resume(intf);
+
+error:
+       return ret;
+}
+
+static int cdc_mbim_resume(struct usb_interface *intf)
+{
+       int  ret = 0;
+       struct usbnet *dev = usb_get_intfdata(intf);
+       struct cdc_mbim_state *info = (void *)&dev->data;
+       struct cdc_ncm_ctx *ctx = info->ctx;
+       bool callsub = (intf == ctx->control && info->subdriver && info->subdriver->resume);
+
+       if (callsub)
+               ret = info->subdriver->resume(intf);
+       if (ret < 0)
+               goto err;
+       ret = usbnet_resume(intf);
+       if (ret < 0 && callsub)
+               info->subdriver->suspend(intf, PMSG_SUSPEND);
+err:
+       return ret;
+}
+
+static const struct driver_info cdc_mbim_info = {
+       .description = "CDC MBIM",
+       .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
+       .bind = cdc_mbim_bind,
+       .unbind = cdc_mbim_unbind,
+       .manage_power = cdc_mbim_manage_power,
+       .rx_fixup = cdc_mbim_rx_fixup,
+       .tx_fixup = cdc_mbim_tx_fixup,
+};
+
+/* MBIM and NCM devices should not need a ZLP after NTBs with
+ * dwNtbOutMaxSize length. Nevertheless, a number of devices from
+ * different vendor IDs will fail unless we send ZLPs, forcing us
+ * to make this the default.
+ *
+ * This default may cause a performance penalty for spec conforming
+ * devices wanting to take advantage of optimizations possible without
+ * ZLPs.  A whitelist is added in an attempt to avoid this for devices
+ * known to conform to the MBIM specification.
+ *
+ * All known devices supporting NCM compatibility mode are also
+ * conforming to the NCM and MBIM specifications. For this reason, the
+ * NCM subclass entry is also in the ZLP whitelist.
+ */
+static const struct driver_info cdc_mbim_info_zlp = {
+       .description = "CDC MBIM",
+       .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
+       .bind = cdc_mbim_bind,
+       .unbind = cdc_mbim_unbind,
+       .manage_power = cdc_mbim_manage_power,
+       .rx_fixup = cdc_mbim_rx_fixup,
+       .tx_fixup = cdc_mbim_tx_fixup,
+};
+
+static const struct usb_device_id mbim_devs[] = {
+       /* This duplicate NCM entry is intentional. MBIM devices can
+        * be disguised as NCM by default, and this is necessary to
+        * allow us to bind the correct driver_info to such devices.
+        *
+        * bind() will sort out this for us, selecting the correct
+        * entry and reject the other
+        */
+       { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+         .driver_info = (unsigned long)&cdc_mbim_info,
+       },
+       /* ZLP conformance whitelist: All Ericsson MBIM devices */
+       { USB_VENDOR_AND_INTERFACE_INFO(0x0bdb, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+         .driver_info = (unsigned long)&cdc_mbim_info,
+       },
+       /* default entry */
+       { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+         .driver_info = (unsigned long)&cdc_mbim_info_zlp,
+       },
+       {
+       },
+};
+MODULE_DEVICE_TABLE(usb, mbim_devs);
+
+static struct usb_driver cdc_mbim_driver = {
+       .name = "cdc_mbim",
+       .id_table = mbim_devs,
+       .probe = usbnet_probe,
+       .disconnect = usbnet_disconnect,
+       .suspend = cdc_mbim_suspend,
+       .resume = cdc_mbim_resume,
+       .reset_resume = cdc_mbim_resume,
+       .supports_autosuspend = 1,
+       .disable_hub_initiated_lpm = 1,
+};
+module_usb_driver(cdc_mbim_driver);
+
+MODULE_AUTHOR("Greg Suarez <gsuarez@smithmicro.com>");
+MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
+MODULE_DESCRIPTION("USB CDC MBIM host driver");
+MODULE_LICENSE("GPL");