--- /dev/null
+/*
+ * drivers/net/phy/at803x.c
+ *
+ * Driver for Atheros 803x PHY
+ *
+ * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/phy.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+
+#define AT803X_INTR_ENABLE 0x12
+#define AT803X_INTR_STATUS 0x13
+#define AT803X_SMART_SPEED 0x14
+#define AT803X_LED_CONTROL 0x18
+#define AT803X_WOL_ENABLE 0x01
+#define AT803X_DEVICE_ADDR 0x03
+#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
+#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
+#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
+#define AT803X_MMD_ACCESS_CONTROL 0x0D
+#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
+#define AT803X_FUNC_DATA 0x4003
+#define AT803X_INER 0x0012
+#define AT803X_INER_INIT 0xec00
+#define AT803X_INSR 0x0013
+#define AT803X_DEBUG_ADDR 0x1D
+#define AT803X_DEBUG_DATA 0x1E
+#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
+#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
+
+#define ATH8030_PHY_ID 0x004dd076
+#define ATH8031_PHY_ID 0x004dd074
+#define ATH8035_PHY_ID 0x004dd072
+
+MODULE_DESCRIPTION("Atheros 803x PHY driver");
+MODULE_AUTHOR("Matus Ujhelyi");
+MODULE_LICENSE("GPL");
+
+struct at803x_priv {
+ bool phy_reset:1;
+ struct gpio_desc *gpiod_reset;
+};
+
+struct at803x_context {
+ u16 bmcr;
+ u16 advertise;
+ u16 control1000;
+ u16 int_enable;
+ u16 smart_speed;
+ u16 led_control;
+};
+
+/* save relevant PHY registers to private copy */
+static void at803x_context_save(struct phy_device *phydev,
+ struct at803x_context *context)
+{
+ context->bmcr = phy_read(phydev, MII_BMCR);
+ context->advertise = phy_read(phydev, MII_ADVERTISE);
+ context->control1000 = phy_read(phydev, MII_CTRL1000);
+ context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
+ context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
+ context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
+}
+
+/* restore relevant PHY registers from private copy */
+static void at803x_context_restore(struct phy_device *phydev,
+ const struct at803x_context *context)
+{
+ phy_write(phydev, MII_BMCR, context->bmcr);
+ phy_write(phydev, MII_ADVERTISE, context->advertise);
+ phy_write(phydev, MII_CTRL1000, context->control1000);
+ phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
+ phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
+ phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
+}
+
+static int at803x_set_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ struct net_device *ndev = phydev->attached_dev;
+ const u8 *mac;
+ int ret;
+ u32 value;
+ unsigned int i, offsets[] = {
+ AT803X_LOC_MAC_ADDR_32_47_OFFSET,
+ AT803X_LOC_MAC_ADDR_16_31_OFFSET,
+ AT803X_LOC_MAC_ADDR_0_15_OFFSET,
+ };
+
+ if (!ndev)
+ return -ENODEV;
+
+ if (wol->wolopts & WAKE_MAGIC) {
+ mac = (const u8 *) ndev->dev_addr;
+
+ if (!is_valid_ether_addr(mac))
+ return -EFAULT;
+
+ for (i = 0; i < 3; i++) {
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+ AT803X_DEVICE_ADDR);
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+ offsets[i]);
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+ AT803X_FUNC_DATA);
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+ mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
+ }
+
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+ value |= AT803X_WOL_ENABLE;
+ ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+ if (ret)
+ return ret;
+ value = phy_read(phydev, AT803X_INTR_STATUS);
+ } else {
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+ value &= (~AT803X_WOL_ENABLE);
+ ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+ if (ret)
+ return ret;
+ value = phy_read(phydev, AT803X_INTR_STATUS);
+ }
+
+ return ret;
+}
+
+static void at803x_get_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ u32 value;
+
+ wol->supported = WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+ if (value & AT803X_WOL_ENABLE)
+ wol->wolopts |= WAKE_MAGIC;
+}
+
+static int at803x_suspend(struct phy_device *phydev)
+{
+ int value;
+ int wol_enabled;
+
+ mutex_lock(&phydev->lock);
+
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+ wol_enabled = value & AT803X_WOL_ENABLE;
+
+ value = phy_read(phydev, MII_BMCR);
+
+ if (wol_enabled)
+ value |= BMCR_ISOLATE;
+ else
+ value |= BMCR_PDOWN;
+
+ phy_write(phydev, MII_BMCR, value);
+
+ mutex_unlock(&phydev->lock);
+
+ return 0;
+}
+
+static int at803x_resume(struct phy_device *phydev)
+{
+ int value;
+
+ mutex_lock(&phydev->lock);
+
+ value = phy_read(phydev, MII_BMCR);
+ value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
+ phy_write(phydev, MII_BMCR, value);
+
+ mutex_unlock(&phydev->lock);
+
+ return 0;
+}
+
+static int at803x_probe(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->dev;
+ struct at803x_priv *priv;
+ struct gpio_desc *gpiod_reset;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiod_reset))
+ return PTR_ERR(gpiod_reset);
+
+ priv->gpiod_reset = gpiod_reset;
+
+ phydev->priv = priv;
+
+ return 0;
+}
+
+static int at803x_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_config_init(phydev);
+ if (ret < 0)
+ return ret;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ ret = phy_write(phydev, AT803X_DEBUG_ADDR,
+ AT803X_DEBUG_SYSTEM_MODE_CTRL);
+ if (ret)
+ return ret;
+ ret = phy_write(phydev, AT803X_DEBUG_DATA,
+ AT803X_DEBUG_RGMII_TX_CLK_DLY);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int at803x_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, AT803X_INSR);
+
+ return (err < 0) ? err : 0;
+}
+
+static int at803x_config_intr(struct phy_device *phydev)
+{
+ int err;
+ int value;
+
+ value = phy_read(phydev, AT803X_INER);
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, AT803X_INER,
+ value | AT803X_INER_INIT);
+ else
+ err = phy_write(phydev, AT803X_INER, 0);
+
+ return err;
+}
+
+static void at803x_link_change_notify(struct phy_device *phydev)
+{
+ struct at803x_priv *priv = phydev->priv;
+
+ /*
+ * Conduct a hardware reset for AT8030 every time a link loss is
+ * signalled. This is necessary to circumvent a hardware bug that
+ * occurs when the cable is unplugged while TX packets are pending
+ * in the FIFO. In such cases, the FIFO enters an error mode it
+ * cannot recover from by software.
+ */
+ if (phydev->drv->phy_id == ATH8030_PHY_ID) {
+ if (phydev->state == PHY_NOLINK) {
+ if (priv->gpiod_reset && !priv->phy_reset) {
+ struct at803x_context context;
+
+ at803x_context_save(phydev, &context);
+
+ gpiod_set_value(priv->gpiod_reset, 0);
+ msleep(1);
+ gpiod_set_value(priv->gpiod_reset, 1);
+ msleep(1);
+
+ at803x_context_restore(phydev, &context);
+
+ dev_dbg(&phydev->dev, "%s(): phy was reset\n",
+ __func__);
+ priv->phy_reset = true;
+ }
+ } else {
+ priv->phy_reset = false;
+ }
+ }
+}
+
+static struct phy_driver at803x_driver[] = {
+{
+ /* ATHEROS 8035 */
+ .phy_id = ATH8035_PHY_ID,
+ .name = "Atheros 8035 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .probe = at803x_probe,
+ .config_init = at803x_config_init,
+ .link_change_notify = at803x_link_change_notify,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
+ .suspend = at803x_suspend,
+ .resume = at803x_resume,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+}, {
+ /* ATHEROS 8030 */
+ .phy_id = ATH8030_PHY_ID,
+ .name = "Atheros 8030 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .probe = at803x_probe,
+ .config_init = at803x_config_init,
+ .link_change_notify = at803x_link_change_notify,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
+ .suspend = at803x_suspend,
+ .resume = at803x_resume,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+}, {
+ /* ATHEROS 8031 */
+ .phy_id = ATH8031_PHY_ID,
+ .name = "Atheros 8031 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .probe = at803x_probe,
+ .config_init = at803x_config_init,
+ .link_change_notify = at803x_link_change_notify,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
+ .suspend = at803x_suspend,
+ .resume = at803x_resume,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = &at803x_ack_interrupt,
+ .config_intr = &at803x_config_intr,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+} };
+
+module_phy_driver(at803x_driver);
+
+static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+ { ATH8030_PHY_ID, 0xffffffef },
+ { ATH8031_PHY_ID, 0xffffffef },
+ { ATH8035_PHY_ID, 0xffffffef },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, atheros_tbl);
Code Review / kvmfornfv.git / blobdiff