Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / net / fddi / skfp / h / smtstate.h

diff --git a/kernel/drivers/net/fddi/skfp/h/smtstate.h b/kernel/drivers/net/fddi/skfp/h/smtstate.h
new file mode 100644 (file)
index 0000000..62fe695
--- /dev/null
+++ b/kernel/drivers/net/fddi/skfp/h/smtstate.h
@@ -0,0 +1,106 @@
+/******************************************************************************
+ *
+ *     (C)Copyright 1998,1999 SysKonnect,
+ *     a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *     This program is free software; you can redistribute it and/or modify
+ *     it under the terms of the GNU General Public License as published by
+ *     the Free Software Foundation; either version 2 of the License, or
+ *     (at your option) any later version.
+ *
+ *     The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _SKFP_H_SMTSTATE_H_
+#define _SKFP_H_SMTSTATE_H_
+
+/*
+ *     SMT state definitions
+ */
+
+#ifndef        KERNEL
+/*
+ * PCM states
+ */
+#define PC0_OFF                        0
+#define PC1_BREAK              1
+#define PC2_TRACE              2
+#define PC3_CONNECT            3
+#define PC4_NEXT               4
+#define PC5_SIGNAL             5
+#define PC6_JOIN               6
+#define PC7_VERIFY             7
+#define PC8_ACTIVE             8
+#define PC9_MAINT              9
+
+/*
+ * PCM modes
+ */
+#define PM_NONE                        0
+#define PM_PEER                        1
+#define PM_TREE                        2
+
+/*
+ * PCM type
+ */
+#define TA                     0
+#define TB                     1
+#define TS                     2
+#define TM                     3
+#define TNONE                  4
+
+/*
+ * CFM states
+ */
+#define SC0_ISOLATED   0               /* isolated */
+#define SC1_WRAP_A     5               /* wrap A */
+#define SC2_WRAP_B     6               /* wrap B */
+#define SC4_THRU_A     12              /* through A */
+#define SC5_THRU_B     7               /* through B (SMt 6.2) */
+#define SC7_WRAP_S     8               /* SAS */
+
+/*
+ * ECM states
+ */
+#define EC0_OUT                0
+#define EC1_IN         1
+#define EC2_TRACE      2
+#define EC3_LEAVE      3
+#define EC4_PATH_TEST  4
+#define EC5_INSERT     5
+#define EC6_CHECK      6
+#define EC7_DEINSERT   7
+
+/*
+ * RMT states
+ */
+#define RM0_ISOLATED   0
+#define RM1_NON_OP     1               /* not operational */
+#define RM2_RING_OP    2               /* ring operational */
+#define RM3_DETECT     3               /* detect dupl addresses */
+#define RM4_NON_OP_DUP 4               /* dupl. addr detected */
+#define RM5_RING_OP_DUP        5               /* ring oper. with dupl. addr */
+#define RM6_DIRECTED   6               /* sending directed beacons */
+#define RM7_TRACE      7               /* trace initiated */
+#endif
+
+struct pcm_state {
+       unsigned char   pcm_type ;              /* TA TB TS TM */
+       unsigned char   pcm_state ;             /* state PC[0-9]_* */
+       unsigned char   pcm_mode ;              /* PM_{NONE,PEER,TREE} */
+       unsigned char   pcm_neighbor ;          /* TA TB TS TM */
+       unsigned char   pcm_bsf ;               /* flag bs : TRUE/FALSE */
+       unsigned char   pcm_lsf ;               /* flag ls : TRUE/FALSE */
+       unsigned char   pcm_lct_fail ;          /* counter lct_fail */
+       unsigned char   pcm_ls_rx ;             /* rx line state */
+       short           pcm_r_val ;             /* signaling bits */
+       short           pcm_t_val ;             /* signaling bits */
+} ;
+
+struct smt_state {
+       struct pcm_state pcm_state[NUMPHYS] ;   /* port A & port B */
+} ;
+
+#endif
+