--- /dev/null
+/* QLogic qed NIC Driver
+ * Copyright (c) 2015 QLogic Corporation
+ *
+ * This software is available under the terms of the GNU General Public License
+ * (GPL) Version 2, available from the file COPYING in the main directory of
+ * this source tree.
+ */
+
+#ifndef _QED_MCP_H
+#define _QED_MCP_H
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include "qed_hsi.h"
+
+struct qed_mcp_link_speed_params {
+ bool autoneg;
+ u32 advertised_speeds; /* bitmask of DRV_SPEED_CAPABILITY */
+ u32 forced_speed; /* In Mb/s */
+};
+
+struct qed_mcp_link_pause_params {
+ bool autoneg;
+ bool forced_rx;
+ bool forced_tx;
+};
+
+struct qed_mcp_link_params {
+ struct qed_mcp_link_speed_params speed;
+ struct qed_mcp_link_pause_params pause;
+ u32 loopback_mode;
+};
+
+struct qed_mcp_link_capabilities {
+ u32 speed_capabilities;
+};
+
+struct qed_mcp_link_state {
+ bool link_up;
+
+ u32 speed; /* In Mb/s */
+ bool full_duplex;
+
+ bool an;
+ bool an_complete;
+ bool parallel_detection;
+ bool pfc_enabled;
+
+#define QED_LINK_PARTNER_SPEED_1G_HD BIT(0)
+#define QED_LINK_PARTNER_SPEED_1G_FD BIT(1)
+#define QED_LINK_PARTNER_SPEED_10G BIT(2)
+#define QED_LINK_PARTNER_SPEED_20G BIT(3)
+#define QED_LINK_PARTNER_SPEED_40G BIT(4)
+#define QED_LINK_PARTNER_SPEED_50G BIT(5)
+#define QED_LINK_PARTNER_SPEED_100G BIT(6)
+ u32 partner_adv_speed;
+
+ bool partner_tx_flow_ctrl_en;
+ bool partner_rx_flow_ctrl_en;
+
+#define QED_LINK_PARTNER_SYMMETRIC_PAUSE (1)
+#define QED_LINK_PARTNER_ASYMMETRIC_PAUSE (2)
+#define QED_LINK_PARTNER_BOTH_PAUSE (3)
+ u8 partner_adv_pause;
+
+ bool sfp_tx_fault;
+};
+
+struct qed_mcp_function_info {
+ u8 pause_on_host;
+
+ enum qed_pci_personality protocol;
+
+ u8 bandwidth_min;
+ u8 bandwidth_max;
+
+ u8 mac[ETH_ALEN];
+
+ u64 wwn_port;
+ u64 wwn_node;
+
+#define QED_MCP_VLAN_UNSET (0xffff)
+ u16 ovlan;
+};
+
+struct qed_mcp_nvm_common {
+ u32 offset;
+ u32 param;
+ u32 resp;
+ u32 cmd;
+};
+
+struct qed_mcp_drv_version {
+ u32 version;
+ u8 name[MCP_DRV_VER_STR_SIZE - 4];
+};
+
+/**
+ * @brief - returns the link params of the hw function
+ *
+ * @param p_hwfn
+ *
+ * @returns pointer to link params
+ */
+struct qed_mcp_link_params *qed_mcp_get_link_params(struct qed_hwfn *);
+
+/**
+ * @brief - return the link state of the hw function
+ *
+ * @param p_hwfn
+ *
+ * @returns pointer to link state
+ */
+struct qed_mcp_link_state *qed_mcp_get_link_state(struct qed_hwfn *);
+
+/**
+ * @brief - return the link capabilities of the hw function
+ *
+ * @param p_hwfn
+ *
+ * @returns pointer to link capabilities
+ */
+struct qed_mcp_link_capabilities
+ *qed_mcp_get_link_capabilities(struct qed_hwfn *p_hwfn);
+
+/**
+ * @brief Request the MFW to set the the link according to 'link_input'.
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * @param b_up - raise link if `true'. Reset link if `false'.
+ *
+ * @return int
+ */
+int qed_mcp_set_link(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt,
+ bool b_up);
+
+/**
+ * @brief Get the management firmware version value
+ *
+ * @param cdev - qed dev pointer
+ * @param mfw_ver - mfw version value
+ *
+ * @return int - 0 - operation was successul.
+ */
+int qed_mcp_get_mfw_ver(struct qed_dev *cdev,
+ u32 *mfw_ver);
+
+/**
+ * @brief Get media type value of the port.
+ *
+ * @param cdev - qed dev pointer
+ * @param mfw_ver - media type value
+ *
+ * @return int -
+ * 0 - Operation was successul.
+ * -EBUSY - Operation failed
+ */
+int qed_mcp_get_media_type(struct qed_dev *cdev,
+ u32 *media_type);
+
+/**
+ * @brief General function for sending commands to the MCP
+ * mailbox. It acquire mutex lock for the entire
+ * operation, from sending the request until the MCP
+ * response. Waiting for MCP response will be checked up
+ * to 5 seconds every 5ms.
+ *
+ * @param p_hwfn - hw function
+ * @param p_ptt - PTT required for register access
+ * @param cmd - command to be sent to the MCP.
+ * @param param - Optional param
+ * @param o_mcp_resp - The MCP response code (exclude sequence).
+ * @param o_mcp_param- Optional parameter provided by the MCP
+ * response
+ * @return int - 0 - operation
+ * was successul.
+ */
+int qed_mcp_cmd(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt,
+ u32 cmd,
+ u32 param,
+ u32 *o_mcp_resp,
+ u32 *o_mcp_param);
+
+/**
+ * @brief - drains the nig, allowing completion to pass in case of pauses.
+ * (Should be called only from sleepable context)
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ */
+int qed_mcp_drain(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt);
+
+/**
+ * @brief Get the flash size value
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * @param p_flash_size - flash size in bytes to be filled.
+ *
+ * @return int - 0 - operation was successul.
+ */
+int qed_mcp_get_flash_size(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt,
+ u32 *p_flash_size);
+
+/**
+ * @brief Send driver version to MFW
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * @param version - Version value
+ * @param name - Protocol driver name
+ *
+ * @return int - 0 - operation was successul.
+ */
+int
+qed_mcp_send_drv_version(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt,
+ struct qed_mcp_drv_version *p_ver);
+
+/* Using hwfn number (and not pf_num) is required since in CMT mode,
+ * same pf_num may be used by two different hwfn
+ * TODO - this shouldn't really be in .h file, but until all fields
+ * required during hw-init will be placed in their correct place in shmem
+ * we need it in qed_dev.c [for readin the nvram reflection in shmem].
+ */
+#define MCP_PF_ID_BY_REL(p_hwfn, rel_pfid) (QED_IS_BB((p_hwfn)->cdev) ? \
+ ((rel_pfid) | \
+ ((p_hwfn)->abs_pf_id & 1) << 3) : \
+ rel_pfid)
+#define MCP_PF_ID(p_hwfn) MCP_PF_ID_BY_REL(p_hwfn, (p_hwfn)->rel_pf_id)
+
+/* TODO - this is only correct as long as only BB is supported, and
+ * no port-swapping is implemented; Afterwards we'll need to fix it.
+ */
+#define MFW_PORT(_p_hwfn) ((_p_hwfn)->abs_pf_id % \
+ ((_p_hwfn)->cdev->num_ports_in_engines * 2))
+struct qed_mcp_info {
+ struct mutex mutex; /* MCP access lock */
+ u32 public_base;
+ u32 drv_mb_addr;
+ u32 mfw_mb_addr;
+ u32 port_addr;
+ u16 drv_mb_seq;
+ u16 drv_pulse_seq;
+ struct qed_mcp_link_params link_input;
+ struct qed_mcp_link_state link_output;
+ struct qed_mcp_link_capabilities link_capabilities;
+ struct qed_mcp_function_info func_info;
+ u8 *mfw_mb_cur;
+ u8 *mfw_mb_shadow;
+ u16 mfw_mb_length;
+ u16 mcp_hist;
+};
+
+/**
+ * @brief Initialize the interface with the MCP
+ *
+ * @param p_hwfn - HW func
+ * @param p_ptt - PTT required for register access
+ *
+ * @return int
+ */
+int qed_mcp_cmd_init(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt);
+
+/**
+ * @brief Initialize the port interface with the MCP
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * Can only be called after `num_ports_in_engines' is set
+ */
+void qed_mcp_cmd_port_init(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt);
+/**
+ * @brief Releases resources allocated during the init process.
+ *
+ * @param p_hwfn - HW func
+ * @param p_ptt - PTT required for register access
+ *
+ * @return int
+ */
+
+int qed_mcp_free(struct qed_hwfn *p_hwfn);
+
+/**
+ * @brief This function is called from the DPC context. After
+ * pointing PTT to the mfw mb, check for events sent by the MCP
+ * to the driver and ack them. In case a critical event
+ * detected, it will be handled here, otherwise the work will be
+ * queued to a sleepable work-queue.
+ *
+ * @param p_hwfn - HW function
+ * @param p_ptt - PTT required for register access
+ * @return int - 0 - operation
+ * was successul.
+ */
+int qed_mcp_handle_events(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt);
+
+/**
+ * @brief Sends a LOAD_REQ to the MFW, and in case operation
+ * succeed, returns whether this PF is the first on the
+ * chip/engine/port or function. This function should be
+ * called when driver is ready to accept MFW events after
+ * Storms initializations are done.
+ *
+ * @param p_hwfn - hw function
+ * @param p_ptt - PTT required for register access
+ * @param p_load_code - The MCP response param containing one
+ * of the following:
+ * FW_MSG_CODE_DRV_LOAD_ENGINE
+ * FW_MSG_CODE_DRV_LOAD_PORT
+ * FW_MSG_CODE_DRV_LOAD_FUNCTION
+ * @return int -
+ * 0 - Operation was successul.
+ * -EBUSY - Operation failed
+ */
+int qed_mcp_load_req(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt,
+ u32 *p_load_code);
+
+/**
+ * @brief Read the MFW mailbox into Current buffer.
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ */
+void qed_mcp_read_mb(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt);
+
+/**
+ * @brief - calls during init to read shmem of all function-related info.
+ *
+ * @param p_hwfn
+ *
+ * @param return 0 upon success.
+ */
+int qed_mcp_fill_shmem_func_info(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt);
+
+/**
+ * @brief - Reset the MCP using mailbox command.
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ *
+ * @param return 0 upon success.
+ */
+int qed_mcp_reset(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt);
+
+/**
+ * @brief indicates whether the MFW objects [under mcp_info] are accessible
+ *
+ * @param p_hwfn
+ *
+ * @return true iff MFW is running and mcp_info is initialized
+ */
+bool qed_mcp_is_init(struct qed_hwfn *p_hwfn);
+
+#endif
Code Review / kvmfornfv.git / blobdiff