Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / net / ethernet / qlogic / Kconfig

diff --git a/kernel/drivers/net/ethernet/qlogic/Kconfig b/kernel/drivers/net/ethernet/qlogic/Kconfig
new file mode 100644 (file)
index 0000000..d49cba1
--- /dev/null
+++ b/kernel/drivers/net/ethernet/qlogic/Kconfig
@@ -0,0 +1,96 @@
+#
+# QLogic network device configuration
+#
+
+config NET_VENDOR_QLOGIC
+       bool "QLogic devices"
+       default y
+       depends on PCI
+       ---help---
+         If you have a network (Ethernet) card belonging to this class, say Y
+         and read the Ethernet-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>.
+
+         Note that the answer to this question doesn't directly affect the
+         kernel: saying N will just cause the configurator to skip all
+         the questions about QLogic cards. If you say Y, you will be asked for
+         your specific card in the following questions.
+
+if NET_VENDOR_QLOGIC
+
+config QLA3XXX
+       tristate "QLogic QLA3XXX Network Driver Support"
+       depends on PCI
+       ---help---
+         This driver supports QLogic ISP3XXX gigabit Ethernet cards.
+
+         To compile this driver as a module, choose M here: the module
+         will be called qla3xxx.
+
+config QLCNIC
+       tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
+       depends on PCI
+       select FW_LOADER
+       ---help---
+         This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
+         devices.
+
+config QLCNIC_SRIOV
+       bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
+       depends on QLCNIC && PCI_IOV
+       default y
+       ---help---
+         This configuration parameter enables Single Root Input Output
+         Virtualization support for QLE83XX Converged Ethernet devices.
+         This allows for virtual function acceleration in virtualized
+         environments.
+
+config QLCNIC_DCB
+       bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
+       depends on QLCNIC && DCB
+       default y
+       ---help---
+         This configuration parameter enables DCB support in QLE83XX
+         and QLE82XX Converged Ethernet devices. This allows for DCB
+         get operations support through rtNetlink interface. Only CEE
+         mode of DCB is supported. PG and PFC values are related only
+         to Tx.
+
+config QLCNIC_VXLAN
+       bool "Virtual eXtensible Local Area Network (VXLAN) offload support"
+       default n
+       depends on QLCNIC && VXLAN && !(QLCNIC=y && VXLAN=m)
+       ---help---
+         This enables hardware offload support for VXLAN protocol over QLogic's
+         84XX series adapters.
+         Say Y here if you want to enable hardware offload support for
+         Virtual eXtensible Local Area Network (VXLAN) in the driver.
+
+config QLCNIC_HWMON
+       bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
+       depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
+       default y
+       ---help---
+         This configuration parameter can be used to read the
+         board temperature in Converged Ethernet devices
+         supported by qlcnic.
+
+         This data is available via the hwmon sysfs interface.
+
+config QLGE
+       tristate "QLogic QLGE 10Gb Ethernet Driver Support"
+       depends on PCI
+       ---help---
+         This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
+
+         To compile this driver as a module, choose M here: the module
+         will be called qlge.
+
+config NETXEN_NIC
+       tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
+       depends on PCI
+       select FW_LOADER
+       ---help---
+         This enables the support for NetXen's Gigabit Ethernet card.
+
+endif # NET_VENDOR_QLOGIC