/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2014 Intel Corporation.
+ Copyright(c) 1999 - 2015 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg_wait_to_complete);
+static void
+ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *, ixgbe_link_speed);
static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg_wait_to_complete);
{
u32 fwsm, manc, factps;
- fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
+ fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw));
if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT)
return false;
if (!(manc & IXGBE_MANC_RCV_TCO_EN))
return false;
- factps = IXGBE_READ_REG(hw, IXGBE_FACTPS);
+ factps = IXGBE_READ_REG(hw, IXGBE_FACTPS(hw));
if (factps & IXGBE_FACTPS_MNGCG)
return false;
if (hw->phy.multispeed_fiber) {
/* Set up dual speed SFP+ support */
mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.setup_mac_link = ixgbe_setup_mac_link_82599;
+ mac->ops.set_rate_select_speed =
+ ixgbe_set_hard_rate_select_speed;
} else {
if ((mac->ops.get_media_type(hw) ==
ixgbe_media_type_backplane) &&
**/
static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
{
- u32 autoc2_reg, fwsm;
+ u32 autoc2_reg;
u16 ee_ctrl_2 = 0;
hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2);
- /* Check to see if MNG FW could be enabled */
- fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
-
- if (((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT) &&
- !hw->wol_enabled &&
+ if (!ixgbe_mng_present(hw) && !hw->wol_enabled &&
ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) {
autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK;
}
/**
- * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg_wait_to_complete: true when waiting for completion is needed
+ * ixgbe_set_hard_rate_select_speed - Set module link speed
+ * @hw: pointer to hardware structure
+ * @speed: link speed to set
*
- * Set the link speed in the AUTOC register and restarts link.
- **/
-static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg_wait_to_complete)
+ * Set module link speed via RS0/RS1 rate select pins.
+ */
+static void
+ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
{
- s32 status = 0;
- ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
- ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
- u32 speedcnt = 0;
u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
- u32 i = 0;
- bool link_up = false;
- bool autoneg = false;
-
- /* Mask off requested but non-supported speeds */
- status = hw->mac.ops.get_link_capabilities(hw, &link_speed,
- &autoneg);
- if (status != 0)
- return status;
-
- speed &= link_speed;
-
- /*
- * Try each speed one by one, highest priority first. We do this in
- * software because 10gb fiber doesn't support speed autonegotiation.
- */
- if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
- speedcnt++;
- highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
-
- /* If we already have link at this speed, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
- false);
- if (status != 0)
- return status;
-
- if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
- goto out;
-
- /* Set the module link speed */
- switch (hw->phy.media_type) {
- case ixgbe_media_type_fiber:
- esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
- break;
- case ixgbe_media_type_fiber_qsfp:
- /* QSFP module automatically detects MAC link speed */
- break;
- default:
- hw_dbg(hw, "Unexpected media type.\n");
- break;
- }
-
- /* Allow module to change analog characteristics (1G->10G) */
- msleep(40);
-
- status = ixgbe_setup_mac_link_82599(hw,
- IXGBE_LINK_SPEED_10GB_FULL,
- autoneg_wait_to_complete);
- if (status != 0)
- return status;
-
- /* Flap the tx laser if it has not already been done */
- if (hw->mac.ops.flap_tx_laser)
- hw->mac.ops.flap_tx_laser(hw);
-
- /*
- * Wait for the controller to acquire link. Per IEEE 802.3ap,
- * Section 73.10.2, we may have to wait up to 500ms if KR is
- * attempted. 82599 uses the same timing for 10g SFI.
- */
- for (i = 0; i < 5; i++) {
- /* Wait for the link partner to also set speed */
- msleep(100);
-
- /* If we have link, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed,
- &link_up, false);
- if (status != 0)
- return status;
-
- if (link_up)
- goto out;
- }
- }
-
- if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
- speedcnt++;
- if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
- highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
-
- /* If we already have link at this speed, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
- false);
- if (status != 0)
- return status;
-
- if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
- goto out;
-
- /* Set the module link speed */
- switch (hw->phy.media_type) {
- case ixgbe_media_type_fiber:
- esdp_reg &= ~IXGBE_ESDP_SDP5;
- esdp_reg |= IXGBE_ESDP_SDP5_DIR;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
- break;
- case ixgbe_media_type_fiber_qsfp:
- /* QSFP module automatically detects MAC link speed */
- break;
- default:
- hw_dbg(hw, "Unexpected media type.\n");
- break;
- }
-
- /* Allow module to change analog characteristics (10G->1G) */
- msleep(40);
-
- status = ixgbe_setup_mac_link_82599(hw,
- IXGBE_LINK_SPEED_1GB_FULL,
- autoneg_wait_to_complete);
- if (status != 0)
- return status;
- /* Flap the tx laser if it has not already been done */
- if (hw->mac.ops.flap_tx_laser)
- hw->mac.ops.flap_tx_laser(hw);
-
- /* Wait for the link partner to also set speed */
- msleep(100);
-
- /* If we have link, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
- false);
- if (status != 0)
- return status;
-
- if (link_up)
- goto out;
+ switch (speed) {
+ case IXGBE_LINK_SPEED_10GB_FULL:
+ esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
+ break;
+ case IXGBE_LINK_SPEED_1GB_FULL:
+ esdp_reg &= ~IXGBE_ESDP_SDP5;
+ esdp_reg |= IXGBE_ESDP_SDP5_DIR;
+ break;
+ default:
+ hw_dbg(hw, "Invalid fixed module speed\n");
+ return;
}
- /*
- * We didn't get link. Configure back to the highest speed we tried,
- * (if there was more than one). We call ourselves back with just the
- * single highest speed that the user requested.
- */
- if (speedcnt > 1)
- status = ixgbe_setup_mac_link_multispeed_fiber(hw,
- highest_link_speed,
- autoneg_wait_to_complete);
-
-out:
- /* Set autoneg_advertised value based on input link speed */
- hw->phy.autoneg_advertised = 0;
-
- if (speed & IXGBE_LINK_SPEED_10GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
-
- if (speed & IXGBE_LINK_SPEED_1GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
-
- return status;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
}
/**
return status;
}
+/**
+ * ixgbe_fdir_check_cmd_complete - poll to check whether FDIRCMD is complete
+ * @hw: pointer to hardware structure
+ * @fdircmd: current value of FDIRCMD register
+ */
+static s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd)
+{
+ int i;
+
+ for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
+ *fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
+ if (!(*fdircmd & IXGBE_FDIRCMD_CMD_MASK))
+ return 0;
+ udelay(10);
+ }
+
+ return IXGBE_ERR_FDIR_CMD_INCOMPLETE;
+}
+
/**
* ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
* @hw: pointer to hardware structure
{
int i;
u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
+ u32 fdircmd;
+ s32 err;
fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
* Before starting reinitialization process,
* FDIRCMD.CMD must be zero.
*/
- for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
- if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
- IXGBE_FDIRCMD_CMD_MASK))
- break;
- udelay(10);
- }
- if (i >= IXGBE_FDIRCMD_CMD_POLL) {
- hw_dbg(hw, "Flow Director previous command isn't complete, aborting table re-initialization.\n");
- return IXGBE_ERR_FDIR_REINIT_FAILED;
+ err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
+ if (err) {
+ hw_dbg(hw, "Flow Director previous command did not complete, aborting table re-initialization.\n");
+ return err;
}
IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
/*
* Continue setup of fdirctrl register bits:
* Turn perfect match filtering on
- * Report hash in RSS field of Rx wb descriptor
* Initialize the drop queue
* Move the flexible bytes to use the ethertype - shift 6 words
* Set the maximum length per hash bucket to 0xA filters
* Send interrupt when 64 (0x4 * 16) filters are left
*/
fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH |
- IXGBE_FDIRCTRL_REPORT_STATUS |
(IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) |
(0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
(0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
* @input: unique input dword
* @common: compressed common input dword
* @queue: queue index to direct traffic to
+ *
+ * Note that the tunnel bit in input must not be set when the hardware
+ * tunneling support does not exist.
**/
s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
union ixgbe_atr_hash_dword input,
union ixgbe_atr_hash_dword common,
u8 queue)
{
- u64 fdirhashcmd;
- u32 fdircmd;
+ u64 fdirhashcmd;
+ u8 flow_type;
+ bool tunnel;
+ u32 fdircmd;
/*
* Get the flow_type in order to program FDIRCMD properly
* lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
*/
- switch (input.formatted.flow_type) {
+ tunnel = !!(input.formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK);
+ flow_type = input.formatted.flow_type &
+ (IXGBE_ATR_L4TYPE_TUNNEL_MASK - 1);
+ switch (flow_type) {
case IXGBE_ATR_FLOW_TYPE_TCPV4:
case IXGBE_ATR_FLOW_TYPE_UDPV4:
case IXGBE_ATR_FLOW_TYPE_SCTPV4:
/* configure FDIRCMD register */
fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
- fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+ fdircmd |= (u32)flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+ if (tunnel)
+ fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER;
/*
* The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+ /* also use it for SCTP */
+ switch (hw->mac.type) {
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm);
+ break;
+ default:
+ break;
+ }
+
/* store source and destination IP masks (big-enian) */
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
~input_mask->formatted.src_ip[0]);
u16 soft_id, u8 queue)
{
u32 fdirport, fdirvlan, fdirhash, fdircmd;
+ s32 err;
/* currently IPv6 is not supported, must be programmed with 0 */
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0),
fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
+ err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
+ if (err) {
+ hw_dbg(hw, "Flow Director command did not complete!\n");
+ return err;
+ }
return 0;
}
u16 soft_id)
{
u32 fdirhash;
- u32 fdircmd = 0;
- u32 retry_count;
- s32 err = 0;
+ u32 fdircmd;
+ s32 err;
/* configure FDIRHASH register */
fdirhash = input->formatted.bkt_hash;
/* Query if filter is present */
IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
- for (retry_count = 10; retry_count; retry_count--) {
- /* allow 10us for query to process */
- udelay(10);
- /* verify query completed successfully */
- fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
- if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK))
- break;
+ err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
+ if (err) {
+ hw_dbg(hw, "Flow Director command did not complete!\n");
+ return err;
}
- if (!retry_count)
- err = IXGBE_ERR_FDIR_REINIT_FAILED;
-
/* if filter exists in hardware then remove it */
if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
}
- return err;
+ return 0;
}
/**
.eeprom_ops = &eeprom_ops_82599,
.phy_ops = &phy_ops_82599,
.mbx_ops = &mbx_ops_generic,
+ .mvals = ixgbe_mvals_8259X,
};
Code Review / kvmfornfv.git / blobdiff