/* Intel PRO/1000 Linux driver
- * Copyright(c) 1999 - 2014 Intel Corporation.
+ * Copyright(c) 1999 - 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
#define DRV_EXTRAVERSION "-k"
-#define DRV_VERSION "2.3.2" DRV_EXTRAVERSION
+#define DRV_VERSION "3.2.6" DRV_EXTRAVERSION
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
adapter->flags2 &= ~FLAG2_IS_DISCARDING;
-
- writel(0, rx_ring->head);
- if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
- e1000e_update_rdt_wa(rx_ring, 0);
- else
- writel(0, rx_ring->tail);
}
static void e1000e_downshift_workaround(struct work_struct *work)
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
-
- writel(0, tx_ring->head);
- if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
- e1000e_update_tdt_wa(tx_ring, 0);
- else
- writel(0, tx_ring->tail);
}
/**
if (work_done < weight) {
if (adapter->itr_setting & 3)
e1000_set_itr(adapter);
- napi_complete(napi);
+ napi_complete_done(napi, work_done);
if (!test_bit(__E1000_DOWN, &adapter->state)) {
if (adapter->msix_entries)
ew32(IMS, adapter->rx_ring->ims_val);
tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0);
tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0);
+ writel(0, tx_ring->head);
+ if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_tdt_wa(tx_ring, 0);
+ else
+ writel(0, tx_ring->tail);
+
/* Set the Tx Interrupt Delay register */
ew32(TIDV, adapter->tx_int_delay);
/* Tx irq moderation */
rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0);
rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0);
+ writel(0, rx_ring->head);
+ if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_rdt_wa(rx_ring, 0);
+ else
+ writel(0, rx_ring->tail);
+
/* Enable Receive Checksum Offload for TCP and UDP */
rxcsum = er32(RXCSUM);
if (adapter->netdev->features & NETIF_F_RXCSUM)
switch (hw->mac.type) {
case e1000_pch2lan:
case e1000_pch_lpt:
- case e1000_pch_spt:
- /* On I217, I218 and I219, the clock frequency is 25MHz
- * or 96MHz as indicated by the System Clock Frequency
- * Indication
- */
- if (((hw->mac.type != e1000_pch_lpt) &&
- (hw->mac.type != e1000_pch_spt)) ||
- (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
+ if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
/* Stable 96MHz frequency */
incperiod = INCPERIOD_96MHz;
incvalue = INCVALUE_96MHz;
shift = INCVALUE_SHIFT_96MHz;
adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz;
+ } else {
+ /* Stable 25MHz frequency */
+ incperiod = INCPERIOD_25MHz;
+ incvalue = INCVALUE_25MHz;
+ shift = INCVALUE_SHIFT_25MHz;
+ adapter->cc.shift = shift;
+ }
+ break;
+ case e1000_pch_spt:
+ if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
+ /* Stable 24MHz frequency */
+ incperiod = INCPERIOD_24MHz;
+ incvalue = INCVALUE_24MHz;
+ shift = INCVALUE_SHIFT_24MHz;
+ adapter->cc.shift = shift;
break;
}
- /* fall-through */
+ return -EINVAL;
case e1000_82574:
case e1000_82583:
/* Stable 25MHz frequency */
adapter->hw.phy.ops.power_down(&adapter->hw);
}
+/**
+ * e1000_flush_tx_ring - remove all descriptors from the tx_ring
+ *
+ * We want to clear all pending descriptors from the TX ring.
+ * zeroing happens when the HW reads the regs. We assign the ring itself as
+ * the data of the next descriptor. We don't care about the data we are about
+ * to reset the HW.
+ */
+static void e1000_flush_tx_ring(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_tx_desc *tx_desc = NULL;
+ u32 tdt, tctl, txd_lower = E1000_TXD_CMD_IFCS;
+ u16 size = 512;
+
+ tctl = er32(TCTL);
+ ew32(TCTL, tctl | E1000_TCTL_EN);
+ tdt = er32(TDT(0));
+ BUG_ON(tdt != tx_ring->next_to_use);
+ tx_desc = E1000_TX_DESC(*tx_ring, tx_ring->next_to_use);
+ tx_desc->buffer_addr = tx_ring->dma;
+
+ tx_desc->lower.data = cpu_to_le32(txd_lower | size);
+ tx_desc->upper.data = 0;
+ /* flush descriptors to memory before notifying the HW */
+ wmb();
+ tx_ring->next_to_use++;
+ if (tx_ring->next_to_use == tx_ring->count)
+ tx_ring->next_to_use = 0;
+ ew32(TDT(0), tx_ring->next_to_use);
+ mmiowb();
+ usleep_range(200, 250);
+}
+
+/**
+ * e1000_flush_rx_ring - remove all descriptors from the rx_ring
+ *
+ * Mark all descriptors in the RX ring as consumed and disable the rx ring
+ */
+static void e1000_flush_rx_ring(struct e1000_adapter *adapter)
+{
+ u32 rctl, rxdctl;
+ struct e1000_hw *hw = &adapter->hw;
+
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ e1e_flush();
+ usleep_range(100, 150);
+
+ rxdctl = er32(RXDCTL(0));
+ /* zero the lower 14 bits (prefetch and host thresholds) */
+ rxdctl &= 0xffffc000;
+
+ /* update thresholds: prefetch threshold to 31, host threshold to 1
+ * and make sure the granularity is "descriptors" and not "cache lines"
+ */
+ rxdctl |= (0x1F | (1 << 8) | E1000_RXDCTL_THRESH_UNIT_DESC);
+
+ ew32(RXDCTL(0), rxdctl);
+ /* momentarily enable the RX ring for the changes to take effect */
+ ew32(RCTL, rctl | E1000_RCTL_EN);
+ e1e_flush();
+ usleep_range(100, 150);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+}
+
+/**
+ * e1000_flush_desc_rings - remove all descriptors from the descriptor rings
+ *
+ * In i219, the descriptor rings must be emptied before resetting the HW
+ * or before changing the device state to D3 during runtime (runtime PM).
+ *
+ * Failure to do this will cause the HW to enter a unit hang state which can
+ * only be released by PCI reset on the device
+ *
+ */
+
+static void e1000_flush_desc_rings(struct e1000_adapter *adapter)
+{
+ u16 hang_state;
+ u32 fext_nvm11, tdlen;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* First, disable MULR fix in FEXTNVM11 */
+ fext_nvm11 = er32(FEXTNVM11);
+ fext_nvm11 |= E1000_FEXTNVM11_DISABLE_MULR_FIX;
+ ew32(FEXTNVM11, fext_nvm11);
+ /* do nothing if we're not in faulty state, or if the queue is empty */
+ tdlen = er32(TDLEN(0));
+ pci_read_config_word(adapter->pdev, PCICFG_DESC_RING_STATUS,
+ &hang_state);
+ if (!(hang_state & FLUSH_DESC_REQUIRED) || !tdlen)
+ return;
+ e1000_flush_tx_ring(adapter);
+ /* recheck, maybe the fault is caused by the rx ring */
+ pci_read_config_word(adapter->pdev, PCICFG_DESC_RING_STATUS,
+ &hang_state);
+ if (hang_state & FLUSH_DESC_REQUIRED)
+ e1000_flush_rx_ring(adapter);
+}
+
/**
* e1000e_reset - bring the hardware into a known good state
*
}
}
+ if (hw->mac.type == e1000_pch_spt)
+ e1000_flush_desc_rings(adapter);
/* Allow time for pending master requests to run */
mac->ops.reset_hw(hw);
phy_data &= ~IGP02E1000_PM_SPD;
e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
}
+ if (hw->mac.type == e1000_pch_spt && adapter->int_mode == 0) {
+ u32 reg;
+
+ /* Fextnvm7 @ 0xe4[2] = 1 */
+ reg = er32(FEXTNVM7);
+ reg |= E1000_FEXTNVM7_SIDE_CLK_UNGATE;
+ ew32(FEXTNVM7, reg);
+ /* Fextnvm9 @ 0x5bb4[13:12] = 11 */
+ reg = er32(FEXTNVM9);
+ reg |= E1000_FEXTNVM9_IOSFSB_CLKGATE_DIS |
+ E1000_FEXTNVM9_IOSFSB_CLKREQ_DIS;
+ ew32(FEXTNVM9, reg);
+ }
+
}
int e1000e_up(struct e1000_adapter *adapter)
spin_unlock(&adapter->stats64_lock);
e1000e_flush_descriptors(adapter);
- e1000_clean_tx_ring(adapter->tx_ring);
- e1000_clean_rx_ring(adapter->rx_ring);
adapter->link_speed = 0;
adapter->link_duplex = 0;
e1000_lv_jumbo_workaround_ich8lan(hw, false))
e_dbg("failed to disable jumbo frame workaround mode\n");
- if (reset && !pci_channel_offline(adapter->pdev))
- e1000e_reset(adapter);
+ if (!pci_channel_offline(adapter->pdev)) {
+ if (reset)
+ e1000e_reset(adapter);
+ else if (hw->mac.type == e1000_pch_spt)
+ e1000_flush_desc_rings(adapter);
+ }
+ e1000_clean_tx_ring(adapter->tx_ring);
+ e1000_clean_rx_ring(adapter->rx_ring);
}
void e1000e_reinit_locked(struct e1000_adapter *adapter)
struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter,
cc);
struct e1000_hw *hw = &adapter->hw;
+ u32 systimel_1, systimel_2, systimeh;
cycle_t systim, systim_next;
-
- /* latch SYSTIMH on read of SYSTIML */
- systim = (cycle_t)er32(SYSTIML);
- systim |= (cycle_t)er32(SYSTIMH) << 32;
+ /* SYSTIMH latching upon SYSTIML read does not work well.
+ * This means that if SYSTIML overflows after we read it but before
+ * we read SYSTIMH, the value of SYSTIMH has been incremented and we
+ * will experience a huge non linear increment in the systime value
+ * to fix that we test for overflow and if true, we re-read systime.
+ */
+ systimel_1 = er32(SYSTIML);
+ systimeh = er32(SYSTIMH);
+ systimel_2 = er32(SYSTIML);
+ /* Check for overflow. If there was no overflow, use the values */
+ if (systimel_1 < systimel_2) {
+ systim = (cycle_t)systimel_1;
+ systim |= (cycle_t)systimeh << 32;
+ } else {
+ /* There was an overflow, read again SYSTIMH, and use
+ * systimel_2
+ */
+ systimeh = er32(SYSTIMH);
+ systim = (cycle_t)systimel_2;
+ systim |= (cycle_t)systimeh << 32;
+ }
if ((hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82583)) {
u64 incvalue, time_delta, rem, temp;
return 0;
err_req_irq:
+ pm_qos_remove_request(&adapter->pm_qos_req);
e1000e_release_hw_control(adapter);
e1000_power_down_phy(adapter);
e1000e_free_rx_resources(adapter->rx_ring);
return retval;
}
+ /* Ensure that the appropriate bits are set in LPI_CTRL
+ * for EEE in Sx
+ */
+ if ((hw->phy.type >= e1000_phy_i217) &&
+ adapter->eee_advert && hw->dev_spec.ich8lan.eee_lp_ability) {
+ u16 lpi_ctrl = 0;
+
+ retval = hw->phy.ops.acquire(hw);
+ if (!retval) {
+ retval = e1e_rphy_locked(hw, I82579_LPI_CTRL,
+ &lpi_ctrl);
+ if (!retval) {
+ if (adapter->eee_advert &
+ hw->dev_spec.ich8lan.eee_lp_ability &
+ I82579_EEE_100_SUPPORTED)
+ lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE;
+ if (adapter->eee_advert &
+ hw->dev_spec.ich8lan.eee_lp_ability &
+ I82579_EEE_1000_SUPPORTED)
+ lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE;
+
+ retval = e1e_wphy_locked(hw, I82579_LPI_CTRL,
+ lpi_ctrl);
+ }
+ }
+ hw->phy.ops.release(hw);
+ }
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant.
}
/**
- * e1000e_disable_aspm - Disable ASPM states
+ * __e1000e_disable_aspm - Disable ASPM states
* @pdev: pointer to PCI device struct
* @state: bit-mask of ASPM states to disable
+ * @locked: indication if this context holds pci_bus_sem locked.
*
* Some devices *must* have certain ASPM states disabled per hardware errata.
**/
-static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
+static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state, int locked)
{
struct pci_dev *parent = pdev->bus->self;
u16 aspm_dis_mask = 0;
"L1" : "");
#ifdef CONFIG_PCIEASPM
- pci_disable_link_state_locked(pdev, state);
+ if (locked)
+ pci_disable_link_state_locked(pdev, state);
+ else
+ pci_disable_link_state(pdev, state);
/* Double-check ASPM control. If not disabled by the above, the
* BIOS is preventing that from happening (or CONFIG_PCIEASPM is
aspm_dis_mask);
}
+/**
+ * e1000e_disable_aspm - Disable ASPM states.
+ * @pdev: pointer to PCI device struct
+ * @state: bit-mask of ASPM states to disable
+ *
+ * This function acquires the pci_bus_sem!
+ * Some devices *must* have certain ASPM states disabled per hardware errata.
+ **/
+static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
+{
+ __e1000e_disable_aspm(pdev, state, 0);
+}
+
+/**
+ * e1000e_disable_aspm_locked Disable ASPM states.
+ * @pdev: pointer to PCI device struct
+ * @state: bit-mask of ASPM states to disable
+ *
+ * This function must be called with pci_bus_sem acquired!
+ * Some devices *must* have certain ASPM states disabled per hardware errata.
+ **/
+static void e1000e_disable_aspm_locked(struct pci_dev *pdev, u16 state)
+{
+ __e1000e_disable_aspm(pdev, state, 1);
+}
+
#ifdef CONFIG_PM
static int __e1000_resume(struct pci_dev *pdev)
{
if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
aspm_disable_flag |= PCIE_LINK_STATE_L1;
if (aspm_disable_flag)
- e1000e_disable_aspm(pdev, aspm_disable_flag);
+ e1000e_disable_aspm_locked(pdev, aspm_disable_flag);
err = pci_enable_device_mem(pdev);
if (err) {
}
}
+static netdev_features_t e1000_fix_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */
+ if ((hw->mac.type >= e1000_pch2lan) && (netdev->mtu > ETH_DATA_LEN))
+ features &= ~NETIF_F_RXFCS;
+
+ return features;
+}
+
static int e1000_set_features(struct net_device *netdev,
netdev_features_t features)
{
.ndo_poll_controller = e1000_netpoll,
#endif
.ndo_set_features = e1000_set_features,
+ .ndo_fix_features = e1000_fix_features,
+ .ndo_features_check = passthru_features_check,
};
/**
pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
e1000e_driver_version);
- pr_info("Copyright(c) 1999 - 2014 Intel Corporation.\n");
+ pr_info("Copyright(c) 1999 - 2015 Intel Corporation.\n");
ret = pci_register_driver(&e1000_driver);
return ret;
Code Review / kvmfornfv.git / blobdiff