Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / ethernet / amd / Kconfig
diff --git a/kernel/drivers/net/ethernet/amd/Kconfig b/kernel/drivers/net/ethernet/amd/Kconfig
new file mode 100644 (file)
index 0000000..4269160
--- /dev/null
@@ -0,0 +1,206 @@
+#
+# AMD network device configuration
+#
+
+config NET_VENDOR_AMD
+       bool "AMD devices"
+       default y
+       depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
+                  SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
+                  (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64
+       ---help---
+         If you have a network (Ethernet) chipset belonging to this class,
+         say Y.
+
+         Note that the answer to this question does not directly affect
+         the kernel: saying N will just case the configurator to skip all
+         the questions regarding AMD chipsets. If you say Y, you will be asked
+         for your specific chipset/driver in the following questions.
+
+if NET_VENDOR_AMD
+
+config A2065
+       tristate "A2065 support"
+       depends on ZORRO
+       select CRC32
+       ---help---
+         If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
+         say N.
+
+         To compile this driver as a module, choose M here: the module
+         will be called a2065.
+
+config AMD8111_ETH
+       tristate "AMD 8111 (new PCI LANCE) support"
+       depends on PCI
+       select CRC32
+       select MII
+       ---help---
+         If you have an AMD 8111-based PCI LANCE ethernet card,
+         answer Y here and read the Ethernet-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>.
+
+         To compile this driver as a module, choose M here. The module
+         will be called amd8111e.
+
+config LANCE
+       tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
+       depends on ISA && ISA_DMA_API && !ARM
+       ---help---
+         If you have a network (Ethernet) card of this type, say Y and read
+         the Ethernet-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
+         of this type.
+
+         To compile this driver as a module, choose M here: the module
+         will be called lance.  This is recommended.
+
+config PCNET32
+       tristate "AMD PCnet32 PCI support"
+       depends on PCI
+       select CRC32
+       select MII
+       ---help---
+         If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
+         answer Y here and read the Ethernet-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>.
+
+         To compile this driver as a module, choose M here. The module
+         will be called pcnet32.
+
+config ARIADNE
+       tristate "Ariadne support"
+       depends on ZORRO
+       ---help---
+         If you have a Village Tronic Ariadne Ethernet adapter, say Y.
+         Otherwise, say N.
+
+         To compile this driver as a module, choose M here: the module
+         will be called ariadne.
+
+config ARM_AM79C961A
+       bool "ARM EBSA110 AM79C961A support"
+       depends on ARM && ARCH_EBSA110
+       select CRC32
+       ---help---
+         If you wish to compile a kernel for the EBSA-110, then you should
+         always answer Y to this.
+
+config ATARILANCE
+       tristate "Atari LANCE support"
+       depends on ATARI
+       ---help---
+         Say Y to include support for several Atari Ethernet adapters based
+         on the AMD LANCE chipset: RieblCard (with or without battery), or
+         PAMCard VME (also the version by Rhotron, with different addresses).
+
+config DECLANCE
+       tristate "DEC LANCE ethernet controller support"
+       depends on MACH_DECSTATION
+       select CRC32
+       ---help---
+         This driver is for the series of Ethernet controllers produced by
+         DEC (now Compaq) based on the AMD LANCE chipset, including the
+         DEPCA series.  (This chipset is better known via the NE2100 cards.)
+
+config HPLANCE
+       bool "HP on-board LANCE support"
+       depends on DIO
+       select CRC32
+       ---help---
+         If you want to use the builtin "LANCE" Ethernet controller on an
+         HP300 machine, say Y here.
+
+config MIPS_AU1X00_ENET
+       tristate "MIPS AU1000 Ethernet support"
+       depends on MIPS_ALCHEMY
+       select PHYLIB
+       select CRC32
+       ---help---
+         If you have an Alchemy Semi AU1X00 based system
+         say Y.  Otherwise, say N.
+
+config MVME147_NET
+       tristate "MVME147 (LANCE) Ethernet support"
+       depends on MVME147
+       select CRC32
+       ---help---
+         Support for the on-board Ethernet interface on the Motorola MVME147
+         single-board computer.  Say Y here to include the
+         driver for this chip in your kernel.
+         To compile this driver as a module, choose M here.
+
+config PCMCIA_NMCLAN
+       tristate "New Media PCMCIA support"
+       depends on PCMCIA
+       help
+         Say Y here if you intend to attach a New Media Ethernet or LiveWire
+         PCMCIA (PC-card) Ethernet card to your computer.
+
+         To compile this driver as a module, choose M here: the module will be
+         called nmclan_cs.  If unsure, say N.
+
+config NI65
+       tristate "NI6510 support"
+       depends on ISA && ISA_DMA_API && !ARM
+       ---help---
+         If you have a network (Ethernet) card of this type, say Y and read
+         the Ethernet-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>.
+
+         To compile this driver as a module, choose M here. The module
+         will be called ni65.
+
+config SUN3LANCE
+       tristate "Sun3/Sun3x on-board LANCE support"
+       depends on (SUN3 || SUN3X)
+       ---help---
+         Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
+         featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
+         here to compile in the Linux driver for this and enable Ethernet.
+         General Linux information on the Sun 3 and 3x series (now
+         discontinued) is at
+         <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+         If you're not building a kernel for a Sun 3, say N.
+
+config SUNLANCE
+       tristate "Sun LANCE support"
+       depends on SBUS
+       select CRC32
+       ---help---
+         This driver supports the "le" interface present on all 32-bit Sparc
+         systems, on some older Ultra systems and as an Sbus option.  These
+         cards are based on the AMD LANCE chipset, which is better known
+         via the NE2100 cards.
+
+         To compile this driver as a module, choose M here: the module
+         will be called sunlance.
+
+config AMD_XGBE
+       tristate "AMD 10GbE Ethernet driver"
+       depends on (OF_NET || ACPI) && HAS_IOMEM && HAS_DMA
+       depends on ARM64 || COMPILE_TEST
+       select PHYLIB
+       select AMD_XGBE_PHY
+       select BITREVERSE
+       select CRC32
+       select PTP_1588_CLOCK
+       ---help---
+         This driver supports the AMD 10GbE Ethernet device found on an
+         AMD SoC.
+
+         To compile this driver as a module, choose M here: the module
+         will be called amd-xgbe.
+
+config AMD_XGBE_DCB
+       bool "Data Center Bridging (DCB) support"
+       default n
+       depends on AMD_XGBE && DCB
+       ---help---
+         Say Y here to enable Data Center Bridging (DCB) support in the
+         driver.
+
+         If unsure, say N.
+
+endif # NET_VENDOR_AMD