Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / net / can / sja1000 / Kconfig

diff --git a/kernel/drivers/net/can/sja1000/Kconfig b/kernel/drivers/net/can/sja1000/Kconfig
new file mode 100644 (file)
index 0000000..1e65cb6
--- /dev/null
+++ b/kernel/drivers/net/can/sja1000/Kconfig
@@ -0,0 +1,103 @@
+menuconfig CAN_SJA1000
+       tristate "Philips/NXP SJA1000 devices"
+       depends on HAS_IOMEM
+
+if CAN_SJA1000
+
+config CAN_SJA1000_ISA
+       tristate "ISA Bus based legacy SJA1000 driver"
+       ---help---
+         This driver adds legacy support for SJA1000 chips connected to
+         the ISA bus using I/O port, memory mapped or indirect access.
+
+config CAN_SJA1000_PLATFORM
+       tristate "Generic Platform Bus based SJA1000 driver"
+       ---help---
+         This driver adds support for the SJA1000 chips connected to
+         the "platform bus" (Linux abstraction for directly to the
+         processor attached devices).  Which can be found on various
+         boards from Phytec (http://www.phytec.de) like the PCM027,
+         PCM038. It also provides the OpenFirmware "platform bus" found
+         on embedded systems with OpenFirmware bindings, e.g. if you
+         have a PowerPC based system you may want to enable this option.
+
+config CAN_EMS_PCMCIA
+       tristate "EMS CPC-CARD Card"
+       depends on PCMCIA
+       ---help---
+         This driver is for the one or two channel CPC-CARD cards from
+         EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
+config CAN_EMS_PCI
+       tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
+       depends on PCI
+       ---help---
+         This driver is for the one, two or four channel CPC-PCI,
+         CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
+         (http://www.ems-wuensche.de).
+
+config CAN_PEAK_PCMCIA
+       tristate "PEAK PCAN-PC Card"
+       depends on PCMCIA
+       depends on HAS_IOPORT_MAP
+       ---help---
+         This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
+         from PEAK-System (http://www.peak-system.com). To compile this
+         driver as a module, choose M here: the module will be called
+         peak_pcmcia.
+
+config CAN_PEAK_PCI
+       tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
+       depends on PCI
+       ---help---
+         This driver is for the PCAN-PCI/PCIe/miniPCI cards
+         (1, 2, 3 or 4 channels) from PEAK-System Technik
+         (http://www.peak-system.com).
+
+config CAN_PEAK_PCIEC
+       bool "PEAK PCAN-ExpressCard Cards"
+       depends on CAN_PEAK_PCI
+       select I2C
+       select I2C_ALGOBIT
+       default y
+       ---help---
+         Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
+         Technik. This will also automatically select I2C and I2C_ALGO
+         configuration options.
+
+config CAN_KVASER_PCI
+       tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
+       depends on PCI
+       ---help---
+         This driver is for the PCIcanx and PCIcan cards (1, 2 or
+         4 channel) from Kvaser (http://www.kvaser.com).
+
+config CAN_PLX_PCI
+       tristate "PLX90xx PCI-bridge based Cards"
+       depends on PCI
+       ---help---
+         This driver is for CAN interface cards based on
+         the PLX90xx PCI bridge.
+         Driver supports now:
+          - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
+          - Adlink PCI-7841/cPCI-7841 SE card
+          - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
+          - esd CAN-PCI/PMC/266
+          - esd CAN-PCIe/2000
+          - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
+          - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
+          - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)
+          - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
+
+config CAN_TSCAN1
+       tristate "TS-CAN1 PC104 boards"
+       depends on ISA
+       help
+         This driver is for Technologic Systems' TSCAN-1 PC104 boards.
+         http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
+         The driver supports multiple boards and automatically configures them:
+         PLD IO base addresses are read from jumpers JP1 and JP2,
+         IRQ numbers are read from jumpers JP4 and JP5,
+         SJA1000 IO base addresses are chosen heuristically (first that works).
+
+endif