/*
* Linux ARCnet driver - COM20020 chipset support
- *
+ *
* Written 1997 by David Woodhouse.
* Written 1994-1999 by Avery Pennarun.
* Written 1999 by Martin Mares <mj@ucw.cz>.
*
* **********************
*/
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/arcdevice.h>
-#include <linux/com20020.h>
+#include <linux/io.h>
-#include <asm/io.h>
+#include "arcdevice.h"
+#include "com20020.h"
-#define VERSION "arcnet: COM20020 chipset support (by David Woodhouse et al.)\n"
-
-static char *clockrates[] =
-{"10 Mb/s", "Reserved", "5 Mb/s",
- "2.5 Mb/s", "1.25Mb/s", "625 Kb/s", "312.5 Kb/s",
- "156.25 Kb/s", "Reserved", "Reserved", "Reserved"};
+static const char * const clockrates[] = {
+ "XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s",
+ "1.25Mb/s", "625 Kb/s", "312.5 Kb/s", "156.25 Kb/s",
+ "Reserved", "Reserved", "Reserved"
+};
static void com20020_command(struct net_device *dev, int command);
static int com20020_status(struct net_device *dev);
int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
/* set up the address register */
- outb((ofs >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
- outb(ofs & 0xff, _ADDR_LO);
+ arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag,
+ ioaddr, COM20020_REG_W_ADDR_HI);
+ arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
/* copy the data */
- TIME("insb", count, insb(_MEMDATA, buf, count));
+ TIME(dev, "insb", count,
+ arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
}
-
static void com20020_copy_to_card(struct net_device *dev, int bufnum,
int offset, void *buf, int count)
{
int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
/* set up the address register */
- outb((ofs >> 8) | AUTOINCflag, _ADDR_HI);
- outb(ofs & 0xff, _ADDR_LO);
+ arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI);
+ arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
/* copy the data */
- TIME("outsb", count, outsb(_MEMDATA, buf, count));
+ TIME(dev, "outsb", count,
+ arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
}
-
/* Reset the card and check some basic stuff during the detection stage. */
int com20020_check(struct net_device *dev)
{
int ioaddr = dev->base_addr, status;
struct arcnet_local *lp = netdev_priv(dev);
- ARCRESET0;
+ arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG);
+ udelay(5);
+ arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG);
mdelay(RESETtime);
lp->setup = lp->clockm ? 0 : (lp->clockp << 1);
/* Enable P1Mode for backplane mode */
lp->setup = lp->setup | P1MODE;
- SET_SUBADR(SUB_SETUP1);
- outb(lp->setup, _XREG);
+ com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
+ arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
+
+ if (lp->clockm != 0) {
+ com20020_set_subaddress(lp, ioaddr, SUB_SETUP2);
+ arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG);
- if (lp->clockm != 0)
- {
- SET_SUBADR(SUB_SETUP2);
- outb(lp->setup2, _XREG);
-
/* must now write the magic "restart operation" command */
mdelay(1);
- outb(0x18, _COMMAND);
+ arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND);
}
- lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2);
+ lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE;
/* set node ID to 0x42 (but transmitter is disabled, so it's okay) */
- SETCONF;
- outb(0x42, ioaddr + BUS_ALIGN*7);
+ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+ arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG);
- status = ASTATUS();
+ status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS);
if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) {
- BUGMSG(D_NORMAL, "status invalid (%Xh).\n", status);
+ arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status);
return -ENODEV;
}
- BUGMSG(D_INIT_REASONS, "status after reset: %X\n", status);
-
- /* Enable TX */
- outb(0x39, _CONFIG);
- outb(inb(ioaddr + BUS_ALIGN*8), ioaddr + BUS_ALIGN*7);
-
- ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
+ arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status);
- status = ASTATUS();
- BUGMSG(D_INIT_REASONS, "status after reset acknowledged: %X\n",
- status);
+ arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
+ ioaddr, COM20020_REG_W_COMMAND);
+ status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS);
+ arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n",
+ status);
/* Read first location of memory */
- outb(0 | RDDATAflag | AUTOINCflag, _ADDR_HI);
- outb(0, _ADDR_LO);
-
- if ((status = inb(_MEMDATA)) != TESTvalue) {
- BUGMSG(D_NORMAL, "Signature byte not found (%02Xh != D1h).\n",
- status);
+ arcnet_outb(0 | RDDATAflag | AUTOINCflag,
+ ioaddr, COM20020_REG_W_ADDR_HI);
+ arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO);
+
+ status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA);
+ if (status != TESTvalue) {
+ arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n",
+ status);
return -ENODEV;
}
return 0;
struct sockaddr *hwaddr = addr;
memcpy(dev->dev_addr, hwaddr->sa_data, 1);
- SET_SUBADR(SUB_NODE);
- outb(dev->dev_addr[0], _XREG);
+ com20020_set_subaddress(lp, ioaddr, SUB_NODE);
+ arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG);
+
+ return 0;
+}
+
+static int com20020_netdev_open(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ struct arcnet_local *lp = netdev_priv(dev);
+
+ lp->config |= TXENcfg;
+ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+ return arcnet_open(dev);
+}
+
+static int com20020_netdev_close(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ struct arcnet_local *lp = netdev_priv(dev);
+
+ arcnet_close(dev);
+
+ /* disable transmitter */
+ lp->config &= ~TXENcfg;
+ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
return 0;
}
const struct net_device_ops com20020_netdev_ops = {
- .ndo_open = arcnet_open,
- .ndo_stop = arcnet_close,
+ .ndo_open = com20020_netdev_open,
+ .ndo_stop = com20020_netdev_close,
.ndo_start_xmit = arcnet_send_packet,
.ndo_tx_timeout = arcnet_timeout,
.ndo_set_mac_address = com20020_set_hwaddr,
lp->hw.copy_from_card = com20020_copy_from_card;
lp->hw.close = com20020_close;
+ /* FIXME: do this some other way! */
if (!dev->dev_addr[0])
- dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN*8); /* FIXME: do this some other way! */
+ dev->dev_addr[0] = arcnet_inb(ioaddr, 8);
+
+ com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
+ arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
- SET_SUBADR(SUB_SETUP1);
- outb(lp->setup, _XREG);
+ if (lp->card_flags & ARC_CAN_10MBIT) {
+ com20020_set_subaddress(lp, ioaddr, SUB_SETUP2);
+ arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG);
- if (lp->card_flags & ARC_CAN_10MBIT)
- {
- SET_SUBADR(SUB_SETUP2);
- outb(lp->setup2, _XREG);
-
/* must now write the magic "restart operation" command */
mdelay(1);
- outb(0x18, _COMMAND);
+ arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND);
}
- lp->config = 0x20 | (lp->timeout << 3) | (lp->backplane << 2) | 1;
+ lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE;
/* Default 0x38 + register: Node ID */
- SETCONF;
- outb(dev->dev_addr[0], _XREG);
+ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+ arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG);
/* reserve the irq */
if (request_irq(dev->irq, arcnet_interrupt, shared,
"arcnet (COM20020)", dev)) {
- BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq);
+ arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq);
return -ENODEV;
}
dev->base_addr = ioaddr;
- BUGMSG(D_NORMAL, "%s: station %02Xh found at %03lXh, IRQ %d.\n",
- lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq);
+ arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n",
+ lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq);
if (lp->backplane)
- BUGMSG(D_NORMAL, "Using backplane mode.\n");
+ arc_printk(D_NORMAL, dev, "Using backplane mode.\n");
if (lp->timeout != 3)
- BUGMSG(D_NORMAL, "Using extended timeout value of %d.\n", lp->timeout);
-
- BUGMSG(D_NORMAL, "Using CKP %d - data rate %s.\n",
- lp->setup >> 1,
- clockrates[3 - ((lp->setup2 & 0xF0) >> 4) + ((lp->setup & 0x0F) >> 1)]);
+ arc_printk(D_NORMAL, dev, "Using extended timeout value of %d\n",
+ lp->timeout);
+
+ arc_printk(D_NORMAL, dev, "Using CKP %d - data rate %s\n",
+ lp->setup >> 1,
+ clockrates[3 -
+ ((lp->setup2 & 0xF0) >> 4) +
+ ((lp->setup & 0x0F) >> 1)]);
+ /* The clockrates array index looks very fragile.
+ * It seems like it could have negative indexing.
+ */
if (register_netdev(dev)) {
free_irq(dev->irq, dev);
return 0;
}
-
-/*
- * Do a hardware reset on the card, and set up necessary registers.
- *
+/* Do a hardware reset on the card, and set up necessary registers.
+ *
* This should be called as little as possible, because it disrupts the
* token on the network (causes a RECON) and requires a significant delay.
*
u_int ioaddr = dev->base_addr;
u_char inbyte;
- BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
- __FILE__,__LINE__,__func__,dev,lp,dev->name);
- BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n",
- dev->name, ASTATUS());
+ arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
+ __FILE__, __LINE__, __func__, dev, lp, dev->name);
+ arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
+ dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS));
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
- lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2);
+ arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
+ lp->config |= (lp->timeout << 3) | (lp->backplane << 2);
/* power-up defaults */
- SETCONF;
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+ arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
if (really_reset) {
/* reset the card */
- ARCRESET;
- mdelay(RESETtime * 2); /* COM20020 seems to be slower sometimes */
+ arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG);
+ udelay(5);
+ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+ mdelay(RESETtime * 2);
+ /* COM20020 seems to be slower sometimes */
}
/* clear flags & end reset */
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
- ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
+ arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
+ arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
+ ioaddr, COM20020_REG_W_COMMAND);
/* verify that the ARCnet signature byte is present */
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
if (inbyte != TESTvalue) {
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
- BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n");
+ arc_printk(D_DEBUG, dev, "%s: %d: %s\n",
+ __FILE__, __LINE__, __func__);
+ arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n");
return 1;
}
/* enable extended (512-byte) packets */
- ACOMMAND(CONFIGcmd | EXTconf);
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND);
+
+ arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
/* done! return success. */
return 0;
}
-
static void com20020_setmask(struct net_device *dev, int mask)
{
u_int ioaddr = dev->base_addr;
- BUGMSG(D_DURING, "Setting mask to %x at %x\n",mask,ioaddr);
- AINTMASK(mask);
-}
+ arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr);
+ arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK);
+}
static void com20020_command(struct net_device *dev, int cmd)
{
u_int ioaddr = dev->base_addr;
- ACOMMAND(cmd);
-}
+ arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND);
+}
static int com20020_status(struct net_device *dev)
{
u_int ioaddr = dev->base_addr;
- return ASTATUS() + (ADIAGSTATUS()<<8);
+ return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) +
+ (arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8);
}
static void com20020_close(struct net_device *dev)
/* disable transmitter */
lp->config &= ~TXENcfg;
- SETCONF;
+ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
}
/* Set or clear the multicast filter for this adaptor.
struct arcnet_local *lp = netdev_priv(dev);
int ioaddr = dev->base_addr;
- if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) { /* Enable promiscuous mode */
+ if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) {
+ /* Enable promiscuous mode */
if (!(lp->setup & PROMISCset))
- BUGMSG(D_NORMAL, "Setting promiscuous flag...\n");
- SET_SUBADR(SUB_SETUP1);
+ arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n");
+ com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
lp->setup |= PROMISCset;
- outb(lp->setup, _XREG);
- } else
+ arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
+ } else {
/* Disable promiscuous mode, use normal mode */
- {
if ((lp->setup & PROMISCset))
- BUGMSG(D_NORMAL, "Resetting promiscuous flag...\n");
- SET_SUBADR(SUB_SETUP1);
+ arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n");
+ com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
lp->setup &= ~PROMISCset;
- outb(lp->setup, _XREG);
+ arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
}
}
static int __init com20020_module_init(void)
{
- BUGLVL(D_NORMAL) printk(VERSION);
+ if (BUGLVL(D_NORMAL))
+ pr_info("%s\n", "COM20020 chipset support (by David Woodhouse et al.)");
return 0;
}
Code Review / kvmfornfv.git / blobdiff