--- /dev/null
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel MIC Host driver.
+ *
+ */
+#include <linux/fs.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+
+#include "../common/mic_dev.h"
+#include "mic_device.h"
+#include "mic_x100.h"
+#include "mic_smpt.h"
+
+/**
+ * mic_x100_write_spad - write to the scratchpad register
+ * @mdev: pointer to mic_device instance
+ * @idx: index to the scratchpad register, 0 based
+ * @val: the data value to put into the register
+ *
+ * This function allows writing of a 32bit value to the indexed scratchpad
+ * register.
+ *
+ * RETURNS: none.
+ */
+static void
+mic_x100_write_spad(struct mic_device *mdev, unsigned int idx, u32 val)
+{
+ dev_dbg(mdev->sdev->parent, "Writing 0x%x to scratch pad index %d\n",
+ val, idx);
+ mic_mmio_write(&mdev->mmio, val,
+ MIC_X100_SBOX_BASE_ADDRESS +
+ MIC_X100_SBOX_SPAD0 + idx * 4);
+}
+
+/**
+ * mic_x100_read_spad - read from the scratchpad register
+ * @mdev: pointer to mic_device instance
+ * @idx: index to scratchpad register, 0 based
+ *
+ * This function allows reading of the 32bit scratchpad register.
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static u32
+mic_x100_read_spad(struct mic_device *mdev, unsigned int idx)
+{
+ u32 val = mic_mmio_read(&mdev->mmio,
+ MIC_X100_SBOX_BASE_ADDRESS +
+ MIC_X100_SBOX_SPAD0 + idx * 4);
+
+ dev_dbg(mdev->sdev->parent,
+ "Reading 0x%x from scratch pad index %d\n", val, idx);
+ return val;
+}
+
+/**
+ * mic_x100_enable_interrupts - Enable interrupts.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_enable_interrupts(struct mic_device *mdev)
+{
+ u32 reg;
+ struct mic_mw *mw = &mdev->mmio;
+ u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0;
+ u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0;
+
+ reg = mic_mmio_read(mw, sice0);
+ reg |= MIC_X100_SBOX_DBR_BITS(0xf) | MIC_X100_SBOX_DMA_BITS(0xff);
+ mic_mmio_write(mw, reg, sice0);
+
+ /*
+ * Enable auto-clear when enabling interrupts. Applicable only for
+ * MSI-x. Legacy and MSI mode cannot have auto-clear enabled.
+ */
+ if (mdev->irq_info.num_vectors > 1) {
+ reg = mic_mmio_read(mw, siac0);
+ reg |= MIC_X100_SBOX_DBR_BITS(0xf) |
+ MIC_X100_SBOX_DMA_BITS(0xff);
+ mic_mmio_write(mw, reg, siac0);
+ }
+}
+
+/**
+ * mic_x100_disable_interrupts - Disable interrupts.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_disable_interrupts(struct mic_device *mdev)
+{
+ u32 reg;
+ struct mic_mw *mw = &mdev->mmio;
+ u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0;
+ u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0;
+ u32 sicc0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICC0;
+
+ reg = mic_mmio_read(mw, sice0);
+ mic_mmio_write(mw, reg, sicc0);
+
+ if (mdev->irq_info.num_vectors > 1) {
+ reg = mic_mmio_read(mw, siac0);
+ reg &= ~(MIC_X100_SBOX_DBR_BITS(0xf) |
+ MIC_X100_SBOX_DMA_BITS(0xff));
+ mic_mmio_write(mw, reg, siac0);
+ }
+}
+
+/**
+ * mic_x100_send_sbox_intr - Send an MIC_X100_SBOX interrupt to MIC.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_send_sbox_intr(struct mic_device *mdev,
+ int doorbell)
+{
+ struct mic_mw *mw = &mdev->mmio;
+ u64 apic_icr_offset = MIC_X100_SBOX_APICICR0 + doorbell * 8;
+ u32 apicicr_low = mic_mmio_read(mw, MIC_X100_SBOX_BASE_ADDRESS +
+ apic_icr_offset);
+
+ /* for MIC we need to make sure we "hit" the send_icr bit (13) */
+ apicicr_low = (apicicr_low | (1 << 13));
+
+ /* Ensure that the interrupt is ordered w.r.t. previous stores. */
+ wmb();
+ mic_mmio_write(mw, apicicr_low,
+ MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
+}
+
+/**
+ * mic_x100_send_rdmasr_intr - Send an RDMASR interrupt to MIC.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_send_rdmasr_intr(struct mic_device *mdev,
+ int doorbell)
+{
+ int rdmasr_offset = MIC_X100_SBOX_RDMASR0 + (doorbell << 2);
+ /* Ensure that the interrupt is ordered w.r.t. previous stores. */
+ wmb();
+ mic_mmio_write(&mdev->mmio, 0,
+ MIC_X100_SBOX_BASE_ADDRESS + rdmasr_offset);
+}
+
+/**
+ * __mic_x100_send_intr - Send interrupt to MIC.
+ * @mdev: pointer to mic_device instance
+ * @doorbell: doorbell number.
+ */
+static void mic_x100_send_intr(struct mic_device *mdev, int doorbell)
+{
+ int rdmasr_db;
+ if (doorbell < MIC_X100_NUM_SBOX_IRQ) {
+ mic_x100_send_sbox_intr(mdev, doorbell);
+ } else {
+ rdmasr_db = doorbell - MIC_X100_NUM_SBOX_IRQ +
+ MIC_X100_RDMASR_IRQ_BASE;
+ mic_x100_send_rdmasr_intr(mdev, rdmasr_db);
+ }
+}
+
+/**
+ * mic_x100_ack_interrupt - Read the interrupt sources register and
+ * clear it. This function will be called in the MSI/INTx case.
+ * @mdev: Pointer to mic_device instance.
+ *
+ * Returns: bitmask of interrupt sources triggered.
+ */
+static u32 mic_x100_ack_interrupt(struct mic_device *mdev)
+{
+ u32 sicr0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICR0;
+ u32 reg = mic_mmio_read(&mdev->mmio, sicr0);
+ mic_mmio_write(&mdev->mmio, reg, sicr0);
+ return reg;
+}
+
+/**
+ * mic_x100_intr_workarounds - These hardware specific workarounds are
+ * to be invoked everytime an interrupt is handled.
+ * @mdev: Pointer to mic_device instance.
+ *
+ * Returns: none
+ */
+static void mic_x100_intr_workarounds(struct mic_device *mdev)
+{
+ struct mic_mw *mw = &mdev->mmio;
+
+ /* Clear pending bit array. */
+ if (MIC_A0_STEP == mdev->stepping)
+ mic_mmio_write(mw, 1, MIC_X100_SBOX_BASE_ADDRESS +
+ MIC_X100_SBOX_MSIXPBACR);
+
+ if (mdev->stepping >= MIC_B0_STEP)
+ mdev->intr_ops->enable_interrupts(mdev);
+}
+
+/**
+ * mic_x100_hw_intr_init - Initialize h/w specific interrupt
+ * information.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_hw_intr_init(struct mic_device *mdev)
+{
+ mdev->intr_info = (struct mic_intr_info *)mic_x100_intr_init;
+}
+
+/**
+ * mic_x100_read_msi_to_src_map - read from the MSI mapping registers
+ * @mdev: pointer to mic_device instance
+ * @idx: index to the mapping register, 0 based
+ *
+ * This function allows reading of the 32bit MSI mapping register.
+ *
+ * RETURNS: The value in the register.
+ */
+static u32
+mic_x100_read_msi_to_src_map(struct mic_device *mdev, int idx)
+{
+ return mic_mmio_read(&mdev->mmio,
+ MIC_X100_SBOX_BASE_ADDRESS +
+ MIC_X100_SBOX_MXAR0 + idx * 4);
+}
+
+/**
+ * mic_x100_program_msi_to_src_map - program the MSI mapping registers
+ * @mdev: pointer to mic_device instance
+ * @idx: index to the mapping register, 0 based
+ * @offset: The bit offset in the register that needs to be updated.
+ * @set: boolean specifying if the bit in the specified offset needs
+ * to be set or cleared.
+ *
+ * RETURNS: None.
+ */
+static void
+mic_x100_program_msi_to_src_map(struct mic_device *mdev,
+ int idx, int offset, bool set)
+{
+ unsigned long reg;
+ struct mic_mw *mw = &mdev->mmio;
+ u32 mxar = MIC_X100_SBOX_BASE_ADDRESS +
+ MIC_X100_SBOX_MXAR0 + idx * 4;
+
+ reg = mic_mmio_read(mw, mxar);
+ if (set)
+ __set_bit(offset, ®);
+ else
+ __clear_bit(offset, ®);
+ mic_mmio_write(mw, reg, mxar);
+}
+
+/*
+ * mic_x100_reset_fw_ready - Reset Firmware ready status field.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_reset_fw_ready(struct mic_device *mdev)
+{
+ mdev->ops->write_spad(mdev, MIC_X100_DOWNLOAD_INFO, 0);
+}
+
+/*
+ * mic_x100_is_fw_ready - Check if firmware is ready.
+ * @mdev: pointer to mic_device instance
+ */
+static bool mic_x100_is_fw_ready(struct mic_device *mdev)
+{
+ u32 scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
+ return MIC_X100_SPAD2_DOWNLOAD_STATUS(scratch2) ? true : false;
+}
+
+/**
+ * mic_x100_get_apic_id - Get bootstrap APIC ID.
+ * @mdev: pointer to mic_device instance
+ */
+static u32 mic_x100_get_apic_id(struct mic_device *mdev)
+{
+ u32 scratch2 = 0;
+
+ scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
+ return MIC_X100_SPAD2_APIC_ID(scratch2);
+}
+
+/**
+ * mic_x100_send_firmware_intr - Send an interrupt to the firmware on MIC.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_send_firmware_intr(struct mic_device *mdev)
+{
+ u32 apicicr_low;
+ u64 apic_icr_offset = MIC_X100_SBOX_APICICR7;
+ int vector = MIC_X100_BSP_INTERRUPT_VECTOR;
+ struct mic_mw *mw = &mdev->mmio;
+
+ /*
+ * For MIC we need to make sure we "hit"
+ * the send_icr bit (13).
+ */
+ apicicr_low = (vector | (1 << 13));
+
+ mic_mmio_write(mw, mic_x100_get_apic_id(mdev),
+ MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset + 4);
+
+ /* Ensure that the interrupt is ordered w.r.t. previous stores. */
+ wmb();
+ mic_mmio_write(mw, apicicr_low,
+ MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
+}
+
+/**
+ * mic_x100_hw_reset - Reset the MIC device.
+ * @mdev: pointer to mic_device instance
+ */
+static void mic_x100_hw_reset(struct mic_device *mdev)
+{
+ u32 reset_reg;
+ u32 rgcr = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_RGCR;
+ struct mic_mw *mw = &mdev->mmio;
+
+ /* Ensure that the reset is ordered w.r.t. previous loads and stores */
+ mb();
+ /* Trigger reset */
+ reset_reg = mic_mmio_read(mw, rgcr);
+ reset_reg |= 0x1;
+ mic_mmio_write(mw, reset_reg, rgcr);
+ /*
+ * It seems we really want to delay at least 1 second
+ * after touching reset to prevent a lot of problems.
+ */
+ msleep(1000);
+}
+
+/**
+ * mic_x100_load_command_line - Load command line to MIC.
+ * @mdev: pointer to mic_device instance
+ * @fw: the firmware image
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static int
+mic_x100_load_command_line(struct mic_device *mdev, const struct firmware *fw)
+{
+ u32 len = 0;
+ u32 boot_mem;
+ char *buf;
+ void __iomem *cmd_line_va = mdev->aper.va + mdev->bootaddr + fw->size;
+#define CMDLINE_SIZE 2048
+
+ boot_mem = mdev->aper.len >> 20;
+ buf = kzalloc(CMDLINE_SIZE, GFP_KERNEL);
+ if (!buf) {
+ dev_err(mdev->sdev->parent,
+ "%s %d allocation failed\n", __func__, __LINE__);
+ return -ENOMEM;
+ }
+ len += snprintf(buf, CMDLINE_SIZE - len,
+ " mem=%dM", boot_mem);
+ if (mdev->cmdline)
+ snprintf(buf + len, CMDLINE_SIZE - len, " %s", mdev->cmdline);
+ memcpy_toio(cmd_line_va, buf, strlen(buf) + 1);
+ kfree(buf);
+ return 0;
+}
+
+/**
+ * mic_x100_load_ramdisk - Load ramdisk to MIC.
+ * @mdev: pointer to mic_device instance
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static int
+mic_x100_load_ramdisk(struct mic_device *mdev)
+{
+ const struct firmware *fw;
+ int rc;
+ struct boot_params __iomem *bp = mdev->aper.va + mdev->bootaddr;
+
+ rc = request_firmware(&fw,
+ mdev->ramdisk, mdev->sdev->parent);
+ if (rc < 0) {
+ dev_err(mdev->sdev->parent,
+ "ramdisk request_firmware failed: %d %s\n",
+ rc, mdev->ramdisk);
+ goto error;
+ }
+ /*
+ * Typically the bootaddr for card OS is 64M
+ * so copy over the ramdisk @ 128M.
+ */
+ memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size);
+ iowrite32(mdev->bootaddr << 1, &bp->hdr.ramdisk_image);
+ iowrite32(fw->size, &bp->hdr.ramdisk_size);
+ release_firmware(fw);
+error:
+ return rc;
+}
+
+/**
+ * mic_x100_get_boot_addr - Get MIC boot address.
+ * @mdev: pointer to mic_device instance
+ *
+ * This function is called during firmware load to determine
+ * the address at which the OS should be downloaded in card
+ * memory i.e. GDDR.
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static int
+mic_x100_get_boot_addr(struct mic_device *mdev)
+{
+ u32 scratch2, boot_addr;
+ int rc = 0;
+
+ scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
+ boot_addr = MIC_X100_SPAD2_DOWNLOAD_ADDR(scratch2);
+ dev_dbg(mdev->sdev->parent, "%s %d boot_addr 0x%x\n",
+ __func__, __LINE__, boot_addr);
+ if (boot_addr > (1 << 31)) {
+ dev_err(mdev->sdev->parent,
+ "incorrect bootaddr 0x%x\n",
+ boot_addr);
+ rc = -EINVAL;
+ goto error;
+ }
+ mdev->bootaddr = boot_addr;
+error:
+ return rc;
+}
+
+/**
+ * mic_x100_load_firmware - Load firmware to MIC.
+ * @mdev: pointer to mic_device instance
+ * @buf: buffer containing boot string including firmware/ramdisk path.
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+static int
+mic_x100_load_firmware(struct mic_device *mdev, const char *buf)
+{
+ int rc;
+ const struct firmware *fw;
+
+ rc = mic_x100_get_boot_addr(mdev);
+ if (rc)
+ goto error;
+ /* load OS */
+ rc = request_firmware(&fw, mdev->firmware, mdev->sdev->parent);
+ if (rc < 0) {
+ dev_err(mdev->sdev->parent,
+ "ramdisk request_firmware failed: %d %s\n",
+ rc, mdev->firmware);
+ goto error;
+ }
+ if (mdev->bootaddr > mdev->aper.len - fw->size) {
+ rc = -EINVAL;
+ dev_err(mdev->sdev->parent, "%s %d rc %d bootaddr 0x%x\n",
+ __func__, __LINE__, rc, mdev->bootaddr);
+ release_firmware(fw);
+ goto error;
+ }
+ memcpy_toio(mdev->aper.va + mdev->bootaddr, fw->data, fw->size);
+ mdev->ops->write_spad(mdev, MIC_X100_FW_SIZE, fw->size);
+ if (!strcmp(mdev->bootmode, "elf"))
+ goto done;
+ /* load command line */
+ rc = mic_x100_load_command_line(mdev, fw);
+ if (rc) {
+ dev_err(mdev->sdev->parent, "%s %d rc %d\n",
+ __func__, __LINE__, rc);
+ goto error;
+ }
+ release_firmware(fw);
+ /* load ramdisk */
+ if (mdev->ramdisk)
+ rc = mic_x100_load_ramdisk(mdev);
+error:
+ dev_dbg(mdev->sdev->parent, "%s %d rc %d\n", __func__, __LINE__, rc);
+done:
+ return rc;
+}
+
+/**
+ * mic_x100_get_postcode - Get postcode status from firmware.
+ * @mdev: pointer to mic_device instance
+ *
+ * RETURNS: postcode.
+ */
+static u32 mic_x100_get_postcode(struct mic_device *mdev)
+{
+ return mic_mmio_read(&mdev->mmio, MIC_X100_POSTCODE);
+}
+
+/**
+ * mic_x100_smpt_set - Update an SMPT entry with a DMA address.
+ * @mdev: pointer to mic_device instance
+ *
+ * RETURNS: none.
+ */
+static void
+mic_x100_smpt_set(struct mic_device *mdev, dma_addr_t dma_addr, u8 index)
+{
+#define SNOOP_ON (0 << 0)
+#define SNOOP_OFF (1 << 0)
+/*
+ * Sbox Smpt Reg Bits:
+ * Bits 31:2 Host address
+ * Bits 1 RSVD
+ * Bits 0 No snoop
+ */
+#define BUILD_SMPT(NO_SNOOP, HOST_ADDR) \
+ (u32)(((HOST_ADDR) << 2) | ((NO_SNOOP) & 0x01))
+
+ uint32_t smpt_reg_val = BUILD_SMPT(SNOOP_ON,
+ dma_addr >> mdev->smpt->info.page_shift);
+ mic_mmio_write(&mdev->mmio, smpt_reg_val,
+ MIC_X100_SBOX_BASE_ADDRESS +
+ MIC_X100_SBOX_SMPT00 + (4 * index));
+}
+
+/**
+ * mic_x100_smpt_hw_init - Initialize SMPT X100 specific fields.
+ * @mdev: pointer to mic_device instance
+ *
+ * RETURNS: none.
+ */
+static void mic_x100_smpt_hw_init(struct mic_device *mdev)
+{
+ struct mic_smpt_hw_info *info = &mdev->smpt->info;
+
+ info->num_reg = 32;
+ info->page_shift = 34;
+ info->page_size = (1ULL << info->page_shift);
+ info->base = 0x8000000000ULL;
+}
+
+struct mic_smpt_ops mic_x100_smpt_ops = {
+ .init = mic_x100_smpt_hw_init,
+ .set = mic_x100_smpt_set,
+};
+
+static bool mic_x100_dma_filter(struct dma_chan *chan, void *param)
+{
+ if (chan->device->dev->parent == (struct device *)param)
+ return true;
+ return false;
+}
+
+struct mic_hw_ops mic_x100_ops = {
+ .aper_bar = MIC_X100_APER_BAR,
+ .mmio_bar = MIC_X100_MMIO_BAR,
+ .read_spad = mic_x100_read_spad,
+ .write_spad = mic_x100_write_spad,
+ .send_intr = mic_x100_send_intr,
+ .ack_interrupt = mic_x100_ack_interrupt,
+ .intr_workarounds = mic_x100_intr_workarounds,
+ .reset = mic_x100_hw_reset,
+ .reset_fw_ready = mic_x100_reset_fw_ready,
+ .is_fw_ready = mic_x100_is_fw_ready,
+ .send_firmware_intr = mic_x100_send_firmware_intr,
+ .load_mic_fw = mic_x100_load_firmware,
+ .get_postcode = mic_x100_get_postcode,
+ .dma_filter = mic_x100_dma_filter,
+};
+
+struct mic_hw_intr_ops mic_x100_intr_ops = {
+ .intr_init = mic_x100_hw_intr_init,
+ .enable_interrupts = mic_x100_enable_interrupts,
+ .disable_interrupts = mic_x100_disable_interrupts,
+ .program_msi_to_src_map = mic_x100_program_msi_to_src_map,
+ .read_msi_to_src_map = mic_x100_read_msi_to_src_map,
+};
Code Review / kvmfornfv.git / blobdiff