--- /dev/null
+/*
+ * wm8350-core.c -- Device access for Wolfson WM8350
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood, Mark Brown
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/workqueue.h>
+
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/comparator.h>
+#include <linux/mfd/wm8350/gpio.h>
+#include <linux/mfd/wm8350/pmic.h>
+#include <linux/mfd/wm8350/rtc.h>
+#include <linux/mfd/wm8350/supply.h>
+#include <linux/mfd/wm8350/wdt.h>
+
+#define WM8350_CLOCK_CONTROL_1 0x28
+#define WM8350_AIF_TEST 0x74
+
+/* debug */
+#define WM8350_BUS_DEBUG 0
+#if WM8350_BUS_DEBUG
+#define dump(regs, src) do { \
+ int i_; \
+ u16 *src_ = src; \
+ printk(KERN_DEBUG); \
+ for (i_ = 0; i_ < regs; i_++) \
+ printk(" 0x%4.4x", *src_++); \
+ printk("\n"); \
+} while (0);
+#else
+#define dump(bytes, src)
+#endif
+
+#define WM8350_LOCK_DEBUG 0
+#if WM8350_LOCK_DEBUG
+#define ldbg(format, arg...) printk(format, ## arg)
+#else
+#define ldbg(format, arg...)
+#endif
+
+/*
+ * WM8350 Device IO
+ */
+static DEFINE_MUTEX(reg_lock_mutex);
+
+/*
+ * Safe read, modify, write methods
+ */
+int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
+{
+ return regmap_update_bits(wm8350->regmap, reg, mask, 0);
+}
+EXPORT_SYMBOL_GPL(wm8350_clear_bits);
+
+int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
+{
+ return regmap_update_bits(wm8350->regmap, reg, mask, mask);
+}
+EXPORT_SYMBOL_GPL(wm8350_set_bits);
+
+u16 wm8350_reg_read(struct wm8350 *wm8350, int reg)
+{
+ unsigned int data;
+ int err;
+
+ err = regmap_read(wm8350->regmap, reg, &data);
+ if (err)
+ dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
+
+ return data;
+}
+EXPORT_SYMBOL_GPL(wm8350_reg_read);
+
+int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val)
+{
+ int ret;
+
+ ret = regmap_write(wm8350->regmap, reg, val);
+
+ if (ret)
+ dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8350_reg_write);
+
+int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs,
+ u16 *dest)
+{
+ int err = 0;
+
+ err = regmap_bulk_read(wm8350->regmap, start_reg, dest, regs);
+ if (err)
+ dev_err(wm8350->dev, "block read starting from R%d failed\n",
+ start_reg);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(wm8350_block_read);
+
+int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
+ u16 *src)
+{
+ int ret = 0;
+
+ ret = regmap_bulk_write(wm8350->regmap, start_reg, src, regs);
+ if (ret)
+ dev_err(wm8350->dev, "block write starting at R%d failed\n",
+ start_reg);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8350_block_write);
+
+/**
+ * wm8350_reg_lock()
+ *
+ * The WM8350 has a hardware lock which can be used to prevent writes to
+ * some registers (generally those which can cause particularly serious
+ * problems if misused). This function enables that lock.
+ */
+int wm8350_reg_lock(struct wm8350 *wm8350)
+{
+ int ret;
+
+ mutex_lock(®_lock_mutex);
+
+ ldbg(__func__);
+
+ ret = wm8350_reg_write(wm8350, WM8350_SECURITY, WM8350_LOCK_KEY);
+ if (ret)
+ dev_err(wm8350->dev, "lock failed\n");
+
+ wm8350->unlocked = false;
+
+ mutex_unlock(®_lock_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8350_reg_lock);
+
+/**
+ * wm8350_reg_unlock()
+ *
+ * The WM8350 has a hardware lock which can be used to prevent writes to
+ * some registers (generally those which can cause particularly serious
+ * problems if misused). This function disables that lock so updates
+ * can be performed. For maximum safety this should be done only when
+ * required.
+ */
+int wm8350_reg_unlock(struct wm8350 *wm8350)
+{
+ int ret;
+
+ mutex_lock(®_lock_mutex);
+
+ ldbg(__func__);
+
+ ret = wm8350_reg_write(wm8350, WM8350_SECURITY, WM8350_UNLOCK_KEY);
+ if (ret)
+ dev_err(wm8350->dev, "unlock failed\n");
+
+ wm8350->unlocked = true;
+
+ mutex_unlock(®_lock_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8350_reg_unlock);
+
+int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
+{
+ u16 reg, result = 0;
+
+ if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP)
+ return -EINVAL;
+ if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP
+ && (scale != 0 || vref != 0))
+ return -EINVAL;
+
+ mutex_lock(&wm8350->auxadc_mutex);
+
+ /* Turn on the ADC */
+ reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA);
+
+ if (scale || vref) {
+ reg = scale << 13;
+ reg |= vref << 12;
+ wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg);
+ }
+
+ reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
+ reg |= 1 << channel | WM8350_AUXADC_POLL;
+ wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg);
+
+ /* If a late IRQ left the completion signalled then consume
+ * the completion. */
+ try_wait_for_completion(&wm8350->auxadc_done);
+
+ /* We ignore the result of the completion and just check for a
+ * conversion result, allowing us to soldier on if the IRQ
+ * infrastructure is not set up for the chip. */
+ wait_for_completion_timeout(&wm8350->auxadc_done, msecs_to_jiffies(5));
+
+ reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
+ if (reg & WM8350_AUXADC_POLL)
+ dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
+ else
+ result = wm8350_reg_read(wm8350,
+ WM8350_AUX1_READBACK + channel);
+
+ /* Turn off the ADC */
+ reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5,
+ reg & ~WM8350_AUXADC_ENA);
+
+ mutex_unlock(&wm8350->auxadc_mutex);
+
+ return result & WM8350_AUXADC_DATA1_MASK;
+}
+EXPORT_SYMBOL_GPL(wm8350_read_auxadc);
+
+static irqreturn_t wm8350_auxadc_irq(int irq, void *irq_data)
+{
+ struct wm8350 *wm8350 = irq_data;
+
+ complete(&wm8350->auxadc_done);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Register a client device. This is non-fatal since there is no need to
+ * fail the entire device init due to a single platform device failing.
+ */
+static void wm8350_client_dev_register(struct wm8350 *wm8350,
+ const char *name,
+ struct platform_device **pdev)
+{
+ int ret;
+
+ *pdev = platform_device_alloc(name, -1);
+ if (*pdev == NULL) {
+ dev_err(wm8350->dev, "Failed to allocate %s\n", name);
+ return;
+ }
+
+ (*pdev)->dev.parent = wm8350->dev;
+ platform_set_drvdata(*pdev, wm8350);
+ ret = platform_device_add(*pdev);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Failed to register %s: %d\n", name, ret);
+ platform_device_put(*pdev);
+ *pdev = NULL;
+ }
+}
+
+int wm8350_device_init(struct wm8350 *wm8350, int irq,
+ struct wm8350_platform_data *pdata)
+{
+ int ret;
+ unsigned int id1, id2, mask_rev;
+ unsigned int cust_id, mode, chip_rev;
+
+ dev_set_drvdata(wm8350->dev, wm8350);
+
+ /* get WM8350 revision and config mode */
+ ret = regmap_read(wm8350->regmap, WM8350_RESET_ID, &id1);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
+ goto err;
+ }
+
+ ret = regmap_read(wm8350->regmap, WM8350_ID, &id2);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
+ goto err;
+ }
+
+ ret = regmap_read(wm8350->regmap, WM8350_REVISION, &mask_rev);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
+ goto err;
+ }
+
+ if (id1 != 0x6143) {
+ dev_err(wm8350->dev,
+ "Device with ID %x is not a WM8350\n", id1);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ mode = (id2 & WM8350_CONF_STS_MASK) >> 10;
+ cust_id = id2 & WM8350_CUST_ID_MASK;
+ chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
+ dev_info(wm8350->dev,
+ "CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n",
+ mode, cust_id, mask_rev, chip_rev);
+
+ if (cust_id != 0) {
+ dev_err(wm8350->dev, "Unsupported CUST_ID\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ switch (mask_rev) {
+ case 0:
+ wm8350->pmic.max_dcdc = WM8350_DCDC_6;
+ wm8350->pmic.max_isink = WM8350_ISINK_B;
+
+ switch (chip_rev) {
+ case WM8350_REV_E:
+ dev_info(wm8350->dev, "WM8350 Rev E\n");
+ break;
+ case WM8350_REV_F:
+ dev_info(wm8350->dev, "WM8350 Rev F\n");
+ break;
+ case WM8350_REV_G:
+ dev_info(wm8350->dev, "WM8350 Rev G\n");
+ wm8350->power.rev_g_coeff = 1;
+ break;
+ case WM8350_REV_H:
+ dev_info(wm8350->dev, "WM8350 Rev H\n");
+ wm8350->power.rev_g_coeff = 1;
+ break;
+ default:
+ /* For safety we refuse to run on unknown hardware */
+ dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n");
+ ret = -ENODEV;
+ goto err;
+ }
+ break;
+
+ case 1:
+ wm8350->pmic.max_dcdc = WM8350_DCDC_4;
+ wm8350->pmic.max_isink = WM8350_ISINK_A;
+
+ switch (chip_rev) {
+ case 0:
+ dev_info(wm8350->dev, "WM8351 Rev A\n");
+ wm8350->power.rev_g_coeff = 1;
+ break;
+
+ case 1:
+ dev_info(wm8350->dev, "WM8351 Rev B\n");
+ wm8350->power.rev_g_coeff = 1;
+ break;
+
+ default:
+ dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
+ ret = -ENODEV;
+ goto err;
+ }
+ break;
+
+ case 2:
+ wm8350->pmic.max_dcdc = WM8350_DCDC_6;
+ wm8350->pmic.max_isink = WM8350_ISINK_B;
+
+ switch (chip_rev) {
+ case 0:
+ dev_info(wm8350->dev, "WM8352 Rev A\n");
+ wm8350->power.rev_g_coeff = 1;
+ break;
+
+ default:
+ dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n");
+ ret = -ENODEV;
+ goto err;
+ }
+ break;
+
+ default:
+ dev_err(wm8350->dev, "Unknown MASK_REV\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ mutex_init(&wm8350->auxadc_mutex);
+ init_completion(&wm8350->auxadc_done);
+
+ ret = wm8350_irq_init(wm8350, irq, pdata);
+ if (ret < 0)
+ goto err;
+
+ if (wm8350->irq_base) {
+ ret = request_threaded_irq(wm8350->irq_base +
+ WM8350_IRQ_AUXADC_DATARDY,
+ NULL, wm8350_auxadc_irq, 0,
+ "auxadc", wm8350);
+ if (ret < 0)
+ dev_warn(wm8350->dev,
+ "Failed to request AUXADC IRQ: %d\n", ret);
+ }
+
+ if (pdata && pdata->init) {
+ ret = pdata->init(wm8350);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Platform init() failed: %d\n",
+ ret);
+ goto err_irq;
+ }
+ }
+
+ wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
+
+ wm8350_client_dev_register(wm8350, "wm8350-codec",
+ &(wm8350->codec.pdev));
+ wm8350_client_dev_register(wm8350, "wm8350-gpio",
+ &(wm8350->gpio.pdev));
+ wm8350_client_dev_register(wm8350, "wm8350-hwmon",
+ &(wm8350->hwmon.pdev));
+ wm8350_client_dev_register(wm8350, "wm8350-power",
+ &(wm8350->power.pdev));
+ wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
+ wm8350_client_dev_register(wm8350, "wm8350-wdt", &(wm8350->wdt.pdev));
+
+ return 0;
+
+err_irq:
+ wm8350_irq_exit(wm8350);
+err:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8350_device_init);
+
+void wm8350_device_exit(struct wm8350 *wm8350)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(wm8350->pmic.led); i++)
+ platform_device_unregister(wm8350->pmic.led[i].pdev);
+
+ for (i = 0; i < ARRAY_SIZE(wm8350->pmic.pdev); i++)
+ platform_device_unregister(wm8350->pmic.pdev[i]);
+
+ platform_device_unregister(wm8350->wdt.pdev);
+ platform_device_unregister(wm8350->rtc.pdev);
+ platform_device_unregister(wm8350->power.pdev);
+ platform_device_unregister(wm8350->hwmon.pdev);
+ platform_device_unregister(wm8350->gpio.pdev);
+ platform_device_unregister(wm8350->codec.pdev);
+
+ if (wm8350->irq_base)
+ free_irq(wm8350->irq_base + WM8350_IRQ_AUXADC_DATARDY, wm8350);
+
+ wm8350_irq_exit(wm8350);
+}
+EXPORT_SYMBOL_GPL(wm8350_device_exit);
+
+MODULE_DESCRIPTION("WM8350 AudioPlus PMIC core driver");
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff