Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / mfd / tps80031.c
diff --git a/kernel/drivers/mfd/tps80031.c b/kernel/drivers/mfd/tps80031.c
new file mode 100644 (file)
index 0000000..ed6c5b0
--- /dev/null
@@ -0,0 +1,573 @@
+/*
+ * tps80031.c -- TI TPS80031/TPS80032 mfd core driver.
+ *
+ * MFD core driver for TI TPS80031/TPS80032 Fully Integrated
+ * Power Management with Power Path and Battery Charger
+ *
+ * Copyright (c) 2012, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps80031.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+static struct resource tps80031_rtc_resources[] = {
+       {
+               .start = TPS80031_INT_RTC_ALARM,
+               .end = TPS80031_INT_RTC_ALARM,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+/* TPS80031 sub mfd devices */
+static const struct mfd_cell tps80031_cell[] = {
+       {
+               .name = "tps80031-pmic",
+       },
+       {
+               .name = "tps80031-clock",
+       },
+       {
+               .name = "tps80031-rtc",
+               .num_resources = ARRAY_SIZE(tps80031_rtc_resources),
+               .resources = tps80031_rtc_resources,
+       },
+       {
+               .name = "tps80031-gpadc",
+       },
+       {
+               .name = "tps80031-fuel-gauge",
+       },
+       {
+               .name = "tps80031-charger",
+       },
+};
+
+static int tps80031_slave_address[TPS80031_NUM_SLAVES] = {
+       TPS80031_I2C_ID0_ADDR,
+       TPS80031_I2C_ID1_ADDR,
+       TPS80031_I2C_ID2_ADDR,
+       TPS80031_I2C_ID3_ADDR,
+};
+
+struct tps80031_pupd_data {
+       u8      reg;
+       u8      pullup_bit;
+       u8      pulldown_bit;
+};
+
+#define TPS80031_IRQ(_reg, _mask)                      \
+       {                                                       \
+               .reg_offset = (TPS80031_INT_MSK_LINE_##_reg) -  \
+                               TPS80031_INT_MSK_LINE_A,        \
+               .mask = BIT(_mask),                             \
+       }
+
+static const struct regmap_irq tps80031_main_irqs[] = {
+       [TPS80031_INT_PWRON]            = TPS80031_IRQ(A, 0),
+       [TPS80031_INT_RPWRON]           = TPS80031_IRQ(A, 1),
+       [TPS80031_INT_SYS_VLOW]         = TPS80031_IRQ(A, 2),
+       [TPS80031_INT_RTC_ALARM]        = TPS80031_IRQ(A, 3),
+       [TPS80031_INT_RTC_PERIOD]       = TPS80031_IRQ(A, 4),
+       [TPS80031_INT_HOT_DIE]          = TPS80031_IRQ(A, 5),
+       [TPS80031_INT_VXX_SHORT]        = TPS80031_IRQ(A, 6),
+       [TPS80031_INT_SPDURATION]       = TPS80031_IRQ(A, 7),
+       [TPS80031_INT_WATCHDOG]         = TPS80031_IRQ(B, 0),
+       [TPS80031_INT_BAT]              = TPS80031_IRQ(B, 1),
+       [TPS80031_INT_SIM]              = TPS80031_IRQ(B, 2),
+       [TPS80031_INT_MMC]              = TPS80031_IRQ(B, 3),
+       [TPS80031_INT_RES]              = TPS80031_IRQ(B, 4),
+       [TPS80031_INT_GPADC_RT]         = TPS80031_IRQ(B, 5),
+       [TPS80031_INT_GPADC_SW2_EOC]    = TPS80031_IRQ(B, 6),
+       [TPS80031_INT_CC_AUTOCAL]       = TPS80031_IRQ(B, 7),
+       [TPS80031_INT_ID_WKUP]          = TPS80031_IRQ(C, 0),
+       [TPS80031_INT_VBUSS_WKUP]       = TPS80031_IRQ(C, 1),
+       [TPS80031_INT_ID]               = TPS80031_IRQ(C, 2),
+       [TPS80031_INT_VBUS]             = TPS80031_IRQ(C, 3),
+       [TPS80031_INT_CHRG_CTRL]        = TPS80031_IRQ(C, 4),
+       [TPS80031_INT_EXT_CHRG]         = TPS80031_IRQ(C, 5),
+       [TPS80031_INT_INT_CHRG]         = TPS80031_IRQ(C, 6),
+       [TPS80031_INT_RES2]             = TPS80031_IRQ(C, 7),
+};
+
+static struct regmap_irq_chip tps80031_irq_chip = {
+       .name = "tps80031",
+       .irqs = tps80031_main_irqs,
+       .num_irqs = ARRAY_SIZE(tps80031_main_irqs),
+       .num_regs = 3,
+       .status_base = TPS80031_INT_STS_A,
+       .mask_base = TPS80031_INT_MSK_LINE_A,
+};
+
+#define PUPD_DATA(_reg, _pulldown_bit, _pullup_bit)    \
+       {                                               \
+               .reg = TPS80031_CFG_INPUT_PUPD##_reg,   \
+               .pulldown_bit = _pulldown_bit,          \
+               .pullup_bit = _pullup_bit,              \
+       }
+
+static const struct tps80031_pupd_data tps80031_pupds[] = {
+       [TPS80031_PREQ1]                = PUPD_DATA(1, BIT(0),  BIT(1)),
+       [TPS80031_PREQ2A]               = PUPD_DATA(1, BIT(2),  BIT(3)),
+       [TPS80031_PREQ2B]               = PUPD_DATA(1, BIT(4),  BIT(5)),
+       [TPS80031_PREQ2C]               = PUPD_DATA(1, BIT(6),  BIT(7)),
+       [TPS80031_PREQ3]                = PUPD_DATA(2, BIT(0),  BIT(1)),
+       [TPS80031_NRES_WARM]            = PUPD_DATA(2, 0,       BIT(2)),
+       [TPS80031_PWM_FORCE]            = PUPD_DATA(2, BIT(5),  0),
+       [TPS80031_CHRG_EXT_CHRG_STATZ]  = PUPD_DATA(2, 0,       BIT(6)),
+       [TPS80031_SIM]                  = PUPD_DATA(3, BIT(0),  BIT(1)),
+       [TPS80031_MMC]                  = PUPD_DATA(3, BIT(2),  BIT(3)),
+       [TPS80031_GPADC_START]          = PUPD_DATA(3, BIT(4),  0),
+       [TPS80031_DVSI2C_SCL]           = PUPD_DATA(4, 0,       BIT(0)),
+       [TPS80031_DVSI2C_SDA]           = PUPD_DATA(4, 0,       BIT(1)),
+       [TPS80031_CTLI2C_SCL]           = PUPD_DATA(4, 0,       BIT(2)),
+       [TPS80031_CTLI2C_SDA]           = PUPD_DATA(4, 0,       BIT(3)),
+};
+static struct tps80031 *tps80031_power_off_dev;
+
+int tps80031_ext_power_req_config(struct device *dev,
+               unsigned long ext_ctrl_flag, int preq_bit,
+               int state_reg_add, int trans_reg_add)
+{
+       u8 res_ass_reg = 0;
+       int preq_mask_bit = 0;
+       int ret;
+
+       if (!(ext_ctrl_flag & TPS80031_EXT_PWR_REQ))
+               return 0;
+
+       if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ1) {
+               res_ass_reg = TPS80031_PREQ1_RES_ASS_A + (preq_bit >> 3);
+               preq_mask_bit = 5;
+       } else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ2) {
+               res_ass_reg = TPS80031_PREQ2_RES_ASS_A + (preq_bit >> 3);
+               preq_mask_bit = 6;
+       } else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ3) {
+               res_ass_reg = TPS80031_PREQ3_RES_ASS_A + (preq_bit >> 3);
+               preq_mask_bit = 7;
+       }
+
+       /* Configure REQ_ASS registers */
+       ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1, res_ass_reg,
+                                       BIT(preq_bit & 0x7));
+       if (ret < 0) {
+               dev_err(dev, "reg 0x%02x setbit failed, err = %d\n",
+                               res_ass_reg, ret);
+               return ret;
+       }
+
+       /* Unmask the PREQ */
+       ret = tps80031_clr_bits(dev, TPS80031_SLAVE_ID1,
+                       TPS80031_PHOENIX_MSK_TRANSITION, BIT(preq_mask_bit));
+       if (ret < 0) {
+               dev_err(dev, "reg 0x%02x clrbit failed, err = %d\n",
+                       TPS80031_PHOENIX_MSK_TRANSITION, ret);
+               return ret;
+       }
+
+       /* Switch regulator control to resource now */
+       if (ext_ctrl_flag & (TPS80031_PWR_REQ_INPUT_PREQ2 |
+                                       TPS80031_PWR_REQ_INPUT_PREQ3)) {
+               ret = tps80031_update(dev, TPS80031_SLAVE_ID1, state_reg_add,
+                                               0x0, TPS80031_STATE_MASK);
+               if (ret < 0)
+                       dev_err(dev, "reg 0x%02x update failed, err = %d\n",
+                               state_reg_add, ret);
+       } else {
+               ret = tps80031_update(dev, TPS80031_SLAVE_ID1, trans_reg_add,
+                               TPS80031_TRANS_SLEEP_OFF,
+                               TPS80031_TRANS_SLEEP_MASK);
+               if (ret < 0)
+                       dev_err(dev, "reg 0x%02x update failed, err = %d\n",
+                               trans_reg_add, ret);
+       }
+       return ret;
+}
+EXPORT_SYMBOL_GPL(tps80031_ext_power_req_config);
+
+static void tps80031_power_off(void)
+{
+       dev_info(tps80031_power_off_dev->dev, "switching off PMU\n");
+       tps80031_write(tps80031_power_off_dev->dev, TPS80031_SLAVE_ID1,
+                               TPS80031_PHOENIX_DEV_ON, TPS80031_DEVOFF);
+}
+
+static void tps80031_pupd_init(struct tps80031 *tps80031,
+                              struct tps80031_platform_data *pdata)
+{
+       struct tps80031_pupd_init_data *pupd_init_data = pdata->pupd_init_data;
+       int data_size = pdata->pupd_init_data_size;
+       int i;
+
+       for (i = 0; i < data_size; ++i) {
+               struct tps80031_pupd_init_data *pupd_init = &pupd_init_data[i];
+               const struct tps80031_pupd_data *pupd =
+                       &tps80031_pupds[pupd_init->input_pin];
+               u8 update_value = 0;
+               u8 update_mask = pupd->pulldown_bit | pupd->pullup_bit;
+
+               if (pupd_init->setting == TPS80031_PUPD_PULLDOWN)
+                       update_value = pupd->pulldown_bit;
+               else if (pupd_init->setting == TPS80031_PUPD_PULLUP)
+                       update_value = pupd->pullup_bit;
+
+               tps80031_update(tps80031->dev, TPS80031_SLAVE_ID1, pupd->reg,
+                               update_value, update_mask);
+       }
+}
+
+static int tps80031_init_ext_control(struct tps80031 *tps80031,
+                       struct tps80031_platform_data *pdata)
+{
+       struct device *dev = tps80031->dev;
+       int ret;
+       int i;
+
+       /* Clear all external control for this rail */
+       for (i = 0; i < 9; ++i) {
+               ret = tps80031_write(dev, TPS80031_SLAVE_ID1,
+                               TPS80031_PREQ1_RES_ASS_A + i, 0);
+               if (ret < 0) {
+                       dev_err(dev, "reg 0x%02x write failed, err = %d\n",
+                               TPS80031_PREQ1_RES_ASS_A + i, ret);
+                       return ret;
+               }
+       }
+
+       /* Mask the PREQ */
+       ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1,
+                       TPS80031_PHOENIX_MSK_TRANSITION, 0x7 << 5);
+       if (ret < 0) {
+               dev_err(dev, "reg 0x%02x set_bits failed, err = %d\n",
+                       TPS80031_PHOENIX_MSK_TRANSITION, ret);
+               return ret;
+       }
+       return ret;
+}
+
+static int tps80031_irq_init(struct tps80031 *tps80031, int irq, int irq_base)
+{
+       struct device *dev = tps80031->dev;
+       int i, ret;
+
+       /*
+        * The MASK register used for updating status register when
+        * interrupt occurs and LINE register used to pass the status
+        * to actual interrupt line.  As per datasheet:
+        * When INT_MSK_LINE [i] is set to 1, the associated interrupt
+        * number i is INT line masked, which means that no interrupt is
+        * generated on the INT line.
+        * When INT_MSK_LINE [i] is set to 0, the associated interrupt
+        * number i is  line enabled: An interrupt is generated on the
+        * INT line.
+        * In any case, the INT_STS [i] status bit may or may not be updated,
+        * only linked to the INT_MSK_STS [i] configuration register bit.
+        *
+        * When INT_MSK_STS [i] is set to 1, the associated interrupt number
+        * i is status masked, which means that no interrupt is stored in
+        * the INT_STS[i] status bit. Note that no interrupt number i is
+        * generated on the INT line, even if the INT_MSK_LINE [i] register
+        * bit is set to 0.
+        * When INT_MSK_STS [i] is set to 0, the associated interrupt number i
+        * is status enabled: An interrupt status is updated in the INT_STS [i]
+        * register. The interrupt may or may not be generated on the INT line,
+        * depending on the INT_MSK_LINE [i] configuration register bit.
+        */
+       for (i = 0; i < 3; i++)
+               tps80031_write(dev, TPS80031_SLAVE_ID2,
+                               TPS80031_INT_MSK_STS_A + i, 0x00);
+
+       ret = regmap_add_irq_chip(tps80031->regmap[TPS80031_SLAVE_ID2], irq,
+                       IRQF_ONESHOT, irq_base,
+                       &tps80031_irq_chip, &tps80031->irq_data);
+       if (ret < 0) {
+               dev_err(dev, "add irq failed, err = %d\n", ret);
+               return ret;
+       }
+       return ret;
+}
+
+static bool rd_wr_reg_id0(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case TPS80031_SMPS1_CFG_FORCE ... TPS80031_SMPS2_CFG_VOLTAGE:
+               return true;
+       default:
+               return false;
+       }
+}
+
+static bool rd_wr_reg_id1(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case TPS80031_SECONDS_REG ... TPS80031_RTC_RESET_STATUS_REG:
+       case TPS80031_VALIDITY0 ... TPS80031_VALIDITY7:
+       case TPS80031_PHOENIX_START_CONDITION ... TPS80031_KEY_PRESS_DUR_CFG:
+       case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE:
+       case TPS80031_BROADCAST_ADDR_ALL ... TPS80031_BROADCAST_ADDR_CLK_RST:
+       case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE:
+       case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE:
+       case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C:
+       case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING:
+       case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD:
+       case TPS80031_BACKUP_REG:
+               return true;
+       default:
+               return false;
+       }
+}
+
+static bool is_volatile_reg_id1(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE:
+       case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE:
+       case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE:
+       case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C:
+       case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING:
+       case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD:
+               return true;
+       default:
+               return false;
+       }
+}
+
+static bool rd_wr_reg_id2(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case TPS80031_USB_VENDOR_ID_LSB ... TPS80031_USB_OTG_REVISION:
+       case TPS80031_GPADC_CTRL ... TPS80031_CTRL_P1:
+       case TPS80031_RTCH0_LSB ... TPS80031_GPCH0_MSB:
+       case TPS80031_TOGGLE1 ... TPS80031_VIBMODE:
+       case TPS80031_PWM1ON ... TPS80031_PWM2OFF:
+       case TPS80031_FG_REG_00 ... TPS80031_FG_REG_11:
+       case TPS80031_INT_STS_A ... TPS80031_INT_MSK_STS_C:
+       case TPS80031_CONTROLLER_CTRL2 ... TPS80031_LED_PWM_CTRL2:
+               return true;
+       default:
+               return false;
+       }
+}
+
+static bool rd_wr_reg_id3(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case TPS80031_GPADC_TRIM0 ... TPS80031_GPADC_TRIM18:
+               return true;
+       default:
+               return false;
+       }
+}
+
+static const struct regmap_config tps80031_regmap_configs[] = {
+       {
+               .reg_bits = 8,
+               .val_bits = 8,
+               .writeable_reg = rd_wr_reg_id0,
+               .readable_reg = rd_wr_reg_id0,
+               .max_register = TPS80031_MAX_REGISTER,
+       },
+       {
+               .reg_bits = 8,
+               .val_bits = 8,
+               .writeable_reg = rd_wr_reg_id1,
+               .readable_reg = rd_wr_reg_id1,
+               .volatile_reg = is_volatile_reg_id1,
+               .max_register = TPS80031_MAX_REGISTER,
+       },
+       {
+               .reg_bits = 8,
+               .val_bits = 8,
+               .writeable_reg = rd_wr_reg_id2,
+               .readable_reg = rd_wr_reg_id2,
+               .max_register = TPS80031_MAX_REGISTER,
+       },
+       {
+               .reg_bits = 8,
+               .val_bits = 8,
+               .writeable_reg = rd_wr_reg_id3,
+               .readable_reg = rd_wr_reg_id3,
+               .max_register = TPS80031_MAX_REGISTER,
+       },
+};
+
+static int tps80031_probe(struct i2c_client *client,
+                         const struct i2c_device_id *id)
+{
+       struct tps80031_platform_data *pdata = dev_get_platdata(&client->dev);
+       struct tps80031 *tps80031;
+       int ret;
+       uint8_t es_version;
+       uint8_t ep_ver;
+       int i;
+
+       if (!pdata) {
+               dev_err(&client->dev, "tps80031 requires platform data\n");
+               return -EINVAL;
+       }
+
+       tps80031 = devm_kzalloc(&client->dev, sizeof(*tps80031), GFP_KERNEL);
+       if (!tps80031) {
+               dev_err(&client->dev, "Malloc failed for tps80031\n");
+               return -ENOMEM;
+       }
+
+       for (i = 0; i < TPS80031_NUM_SLAVES; i++) {
+               if (tps80031_slave_address[i] == client->addr)
+                       tps80031->clients[i] = client;
+               else
+                       tps80031->clients[i] = i2c_new_dummy(client->adapter,
+                                               tps80031_slave_address[i]);
+               if (!tps80031->clients[i]) {
+                       dev_err(&client->dev, "can't attach client %d\n", i);
+                       ret = -ENOMEM;
+                       goto fail_client_reg;
+               }
+
+               i2c_set_clientdata(tps80031->clients[i], tps80031);
+               tps80031->regmap[i] = devm_regmap_init_i2c(tps80031->clients[i],
+                                       &tps80031_regmap_configs[i]);
+               if (IS_ERR(tps80031->regmap[i])) {
+                       ret = PTR_ERR(tps80031->regmap[i]);
+                       dev_err(&client->dev,
+                               "regmap %d init failed, err %d\n", i, ret);
+                       goto fail_client_reg;
+               }
+       }
+
+       ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3,
+                       TPS80031_JTAGVERNUM, &es_version);
+       if (ret < 0) {
+               dev_err(&client->dev,
+                       "Silicon version number read failed: %d\n", ret);
+               goto fail_client_reg;
+       }
+
+       ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3,
+                       TPS80031_EPROM_REV, &ep_ver);
+       if (ret < 0) {
+               dev_err(&client->dev,
+                       "Silicon eeprom version read failed: %d\n", ret);
+               goto fail_client_reg;
+       }
+
+       dev_info(&client->dev, "ES version 0x%02x and EPROM version 0x%02x\n",
+                                       es_version, ep_ver);
+       tps80031->es_version = es_version;
+       tps80031->dev = &client->dev;
+       i2c_set_clientdata(client, tps80031);
+       tps80031->chip_info = id->driver_data;
+
+       ret = tps80031_irq_init(tps80031, client->irq, pdata->irq_base);
+       if (ret) {
+               dev_err(&client->dev, "IRQ init failed: %d\n", ret);
+               goto fail_client_reg;
+       }
+
+       tps80031_pupd_init(tps80031, pdata);
+
+       tps80031_init_ext_control(tps80031, pdata);
+
+       ret = mfd_add_devices(tps80031->dev, -1,
+                       tps80031_cell, ARRAY_SIZE(tps80031_cell),
+                       NULL, 0,
+                       regmap_irq_get_domain(tps80031->irq_data));
+       if (ret < 0) {
+               dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret);
+               goto fail_mfd_add;
+       }
+
+       if (pdata->use_power_off && !pm_power_off) {
+               tps80031_power_off_dev = tps80031;
+               pm_power_off = tps80031_power_off;
+       }
+       return 0;
+
+fail_mfd_add:
+       regmap_del_irq_chip(client->irq, tps80031->irq_data);
+
+fail_client_reg:
+       for (i = 0; i < TPS80031_NUM_SLAVES; i++) {
+               if (tps80031->clients[i]  && (tps80031->clients[i] != client))
+                       i2c_unregister_device(tps80031->clients[i]);
+       }
+       return ret;
+}
+
+static int tps80031_remove(struct i2c_client *client)
+{
+       struct tps80031 *tps80031 = i2c_get_clientdata(client);
+       int i;
+
+       if (tps80031_power_off_dev == tps80031) {
+               tps80031_power_off_dev = NULL;
+               pm_power_off = NULL;
+       }
+
+       mfd_remove_devices(tps80031->dev);
+
+       regmap_del_irq_chip(client->irq, tps80031->irq_data);
+
+       for (i = 0; i < TPS80031_NUM_SLAVES; i++) {
+               if (tps80031->clients[i] != client)
+                       i2c_unregister_device(tps80031->clients[i]);
+       }
+       return 0;
+}
+
+static const struct i2c_device_id tps80031_id_table[] = {
+       { "tps80031", TPS80031 },
+       { "tps80032", TPS80032 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, tps80031_id_table);
+
+static struct i2c_driver tps80031_driver = {
+       .driver = {
+               .name   = "tps80031",
+               .owner  = THIS_MODULE,
+       },
+       .probe          = tps80031_probe,
+       .remove         = tps80031_remove,
+       .id_table       = tps80031_id_table,
+};
+
+static int __init tps80031_init(void)
+{
+       return i2c_add_driver(&tps80031_driver);
+}
+subsys_initcall(tps80031_init);
+
+static void __exit tps80031_exit(void)
+{
+       i2c_del_driver(&tps80031_driver);
+}
+module_exit(tps80031_exit);
+
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_DESCRIPTION("TPS80031 core driver");
+MODULE_LICENSE("GPL v2");