--- /dev/null
+/*
+ em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
+ video capture devices
+
+ Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
+ Markus Rechberger <mrechberger@gmail.com>
+ Mauro Carvalho Chehab <mchehab@infradead.org>
+ Sascha Sommer <saschasommer@freenet.de>
+ Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/usb.h>
+#include <media/tuner.h>
+#include <media/msp3400.h>
+#include <media/saa7115.h>
+#include <media/tvp5150.h>
+#include <media/tvaudio.h>
+#include <media/i2c-addr.h>
+#include <media/tveeprom.h>
+#include <media/v4l2-common.h>
+
+#include "em28xx.h"
+
+#define DRIVER_NAME "em28xx"
+
+static int tuner = -1;
+module_param(tuner, int, 0444);
+MODULE_PARM_DESC(tuner, "tuner type");
+
+static unsigned int disable_ir;
+module_param(disable_ir, int, 0444);
+MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
+
+static unsigned int disable_usb_speed_check;
+module_param(disable_usb_speed_check, int, 0444);
+MODULE_PARM_DESC(disable_usb_speed_check,
+ "override min bandwidth requirement of 480M bps");
+
+static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
+module_param_array(card, int, NULL, 0444);
+MODULE_PARM_DESC(card, "card type");
+
+static int usb_xfer_mode = -1;
+module_param(usb_xfer_mode, int, 0444);
+MODULE_PARM_DESC(usb_xfer_mode,
+ "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)");
+
+/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
+static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS);
+
+struct em28xx_hash_table {
+ unsigned long hash;
+ unsigned int model;
+ unsigned int tuner;
+};
+
+static void em28xx_pre_card_setup(struct em28xx *dev);
+
+/*
+ * Reset sequences for analog/digital modes
+ */
+
+/* Reset for the most [analog] boards */
+static struct em28xx_reg_seq default_analog[] = {
+ {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Reset for the most [digital] boards */
+static struct em28xx_reg_seq default_digital[] = {
+ {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Board Hauppauge WinTV HVR 900 analog */
+static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
+ {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10},
+ { 0x05, 0xff, 0x10, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Board Hauppauge WinTV HVR 900 digital */
+static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
+ {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x04, 0x0f, 10},
+ {EM2880_R04_GPO, 0x0c, 0x0f, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Board Hauppauge WinTV HVR 900 (R2) digital */
+static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
+ {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x0c, 0x0f, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
+static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
+ {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
+
+/* Board - EM2870 Kworld 355u
+ Analog - No input analog */
+
+/* Board - EM2882 Kworld 315U digital */
+static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
+ {EM2880_R04_GPO, 0x04, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 10},
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq kworld_330u_analog[] = {
+ {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x00, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq kworld_330u_digital[] = {
+ {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Evga inDtube
+ GPIO0 - Enable digital power (s5h1409) - low to enable
+ GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
+ GPIO4 - xc3028 reset
+ GOP3 - s5h1409 reset
+ */
+static struct em28xx_reg_seq evga_indtube_analog[] = {
+ {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq evga_indtube_digital[] = {
+ {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1},
+ {EM2880_R04_GPO, 0x04, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 1},
+ { -1, -1, -1, -1},
+};
+
+/*
+ * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map:
+ * EM_GPIO_0 - currently unknown
+ * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
+ * EM_GPIO_2 - currently unknown
+ * EM_GPIO_3 - currently unknown
+ * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
+ * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
+ * EM_GPIO_6 - currently unknown
+ * EM_GPIO_7 - currently unknown
+ */
+static struct em28xx_reg_seq kworld_a340_digital[] = {
+ {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq kworld_ub435q_v3_digital[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
+ { -1, -1, -1, -1},
+};
+
+/* Pinnacle Hybrid Pro eb1a:2881 */
+static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
+ {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
+ {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
+ {EM2880_R04_GPO, 0x0c, 0xff, 1},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
+ {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x00, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
+ {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+/* PCTV HD Mini (80e) GPIOs
+ 0-5: not used
+ 6: demod reset, active low
+ 7: LED on, active high */
+static struct em28xx_reg_seq em2874_pctv_80e_digital[] = {
+ {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
+ {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/
+ {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+/* eb1a:2868 Reddo DVB-C USB TV Box
+ GPIO4 - CU1216L NIM
+ Other GPIOs seems to be don't care. */
+static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
+ {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Callback for the most boards */
+static struct em28xx_reg_seq default_tuner_gpio[] = {
+ {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Mute/unmute */
+static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
+ {EM2820_R08_GPIO_CTRL, 5, 7, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
+ {EM2820_R08_GPIO_CTRL, 4, 7, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq compro_mute_gpio[] = {
+ {EM2820_R08_GPIO_CTRL, 6, 7, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Terratec AV350 */
+static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
+ {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq silvercrest_reg_seq[] = {
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq vc211a_enable[] = {
+ {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq dikom_dk300_digital[] = {
+ {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Reset for the most [digital] boards */
+static struct em28xx_reg_seq leadership_digital[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq leadership_reset[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+/* 2013:024f PCTV nanoStick T2 290e
+ * GPIO_6 - demod reset
+ * GPIO_7 - LED
+ */
+static struct em28xx_reg_seq pctv_290e[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80},
+ {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
+ { -1, -1, -1, -1},
+};
+
+#if 0
+static struct em28xx_reg_seq terratec_h5_gpio[] = {
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq terratec_h5_digital[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+#endif
+
+/* 2013:024f PCTV DVB-S2 Stick 460e
+ * GPIO_0 - POWER_ON
+ * GPIO_1 - BOOST
+ * GPIO_2 - VUV_LNB (red LED)
+ * GPIO_3 - EXT_12V
+ * GPIO_4 - INT_DEM (DEMOD GPIO_0)
+ * GPIO_5 - INT_LNB
+ * GPIO_6 - RESET_DEM
+ * GPIO_7 - LED (green LED)
+ */
+static struct em28xx_reg_seq pctv_460e[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50},
+ { 0x0d, 0xff, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */
+ { 0x0d, 0x42, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */
+ {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20},
+ { -1, -1, -1, -1},
+};
+
+/*
+ * 2013:0258 PCTV DVB-S2 Stick (461e)
+ * GPIO 0 = POWER_ON
+ * GPIO 1 = BOOST
+ * GPIO 2 = VUV_LNB (red LED)
+ * GPIO 3 = #EXT_12V
+ * GPIO 4 = INT_DEM
+ * GPIO 5 = INT_LNB
+ * GPIO 6 = #RESET_DEM
+ * GPIO 7 = P07_LED (green LED)
+ */
+static struct em28xx_reg_seq pctv_461e[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0},
+ {0x0d, 0xff, 0xff, 0},
+ {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */
+ {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */
+ {0x0d, 0x42, 0xff, 0},
+ {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0},
+ {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */
+ { -1, -1, -1, -1},
+};
+
+#if 0
+static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */
+ {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq hauppauge_930c_digital[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+#endif
+
+/* 1b80:e425 MaxMedia UB425-TC
+ * 1b80:e1cc Delock 61959
+ * GPIO_6 - demod reset, 0=active
+ * GPIO_7 - LED, 0=active
+ */
+static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
+ { -1, -1, -1, -1},
+};
+
+/* 2304:0242 PCTV QuatroStick (510e)
+ * GPIO_2: decoder reset, 0=active
+ * GPIO_4: decoder suspend, 0=active
+ * GPIO_6: demod reset, 0=active
+ * GPIO_7: LED, 1=active
+ */
+static struct em28xx_reg_seq pctv_510e[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
+ { -1, -1, -1, -1},
+};
+
+/* 2013:0251 PCTV QuatroStick nano (520e)
+ * GPIO_2: decoder reset, 0=active
+ * GPIO_4: decoder suspend, 0=active
+ * GPIO_6: demod reset, 0=active
+ * GPIO_7: LED, 1=active
+ */
+static struct em28xx_reg_seq pctv_520e[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
+ { -1, -1, -1, -1},
+};
+
+/* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
+ * reg 0x80/0x84:
+ * GPIO_0: capturing LED, 0=on, 1=off
+ * GPIO_2: AV mute button, 0=pressed, 1=unpressed
+ * GPIO 3: illumination button, 0=pressed, 1=unpressed
+ * GPIO_6: illumination/flash LED, 0=on, 1=off
+ * reg 0x81/0x85:
+ * GPIO_7: snapshot button, 0=pressed, 1=unpressed
+ */
+static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = {
+ {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq pctv_292e[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
+ {0x0d, 0xff, 0xff, 950},
+ {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410},
+ {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300},
+ {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60},
+ {0x0d, 0x42, 0xff, 50},
+ {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
+ {-1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq terratec_t2_stick_hd[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
+ {0x0d, 0xff, 0xff, 600},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300},
+ {0x0d, 0x42, 0xff, 1000},
+ {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
+ {-1, -1, -1, -1},
+};
+
+/*
+ * Button definitions
+ */
+static struct em28xx_button std_snapshot_button[] = {
+ {
+ .role = EM28XX_BUTTON_SNAPSHOT,
+ .reg_r = EM28XX_R0C_USBSUSP,
+ .reg_clearing = EM28XX_R0C_USBSUSP,
+ .mask = EM28XX_R0C_USBSUSP_SNAPSHOT,
+ .inverted = 0,
+ },
+ {-1, 0, 0, 0, 0},
+};
+
+static struct em28xx_button speedlink_vad_laplace_buttons[] = {
+ {
+ .role = EM28XX_BUTTON_SNAPSHOT,
+ .reg_r = EM2874_R85_GPIO_P1_STATE,
+ .mask = 0x80,
+ .inverted = 1,
+ },
+ {
+ .role = EM28XX_BUTTON_ILLUMINATION,
+ .reg_r = EM2874_R84_GPIO_P0_STATE,
+ .mask = 0x08,
+ .inverted = 1,
+ },
+ {-1, 0, 0, 0, 0},
+};
+
+/*
+ * LED definitions
+ */
+static struct em28xx_led speedlink_vad_laplace_leds[] = {
+ {
+ .role = EM28XX_LED_ANALOG_CAPTURING,
+ .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
+ .gpio_mask = 0x01,
+ .inverted = 1,
+ },
+ {
+ .role = EM28XX_LED_ILLUMINATION,
+ .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
+ .gpio_mask = 0x40,
+ .inverted = 1,
+ },
+ {-1, 0, 0, 0},
+};
+
+static struct em28xx_led kworld_ub435q_v3_leds[] = {
+ {
+ .role = EM28XX_LED_DIGITAL_CAPTURING,
+ .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
+ .gpio_mask = 0x80,
+ .inverted = 1,
+ },
+ {-1, 0, 0, 0},
+};
+
+static struct em28xx_led pctv_80e_leds[] = {
+ {
+ .role = EM28XX_LED_DIGITAL_CAPTURING,
+ .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
+ .gpio_mask = 0x80,
+ .inverted = 0,
+ },
+ {-1, 0, 0, 0},
+};
+
+/*
+ * Board definitions
+ */
+struct em28xx_board em28xx_boards[] = {
+ [EM2750_BOARD_UNKNOWN] = {
+ .name = "EM2710/EM2750/EM2751 webcam grabber",
+ .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = silvercrest_reg_seq,
+ } },
+ },
+ [EM2800_BOARD_UNKNOWN] = {
+ .name = "Unknown EM2800 video grabber",
+ .is_em2800 = 1,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .tuner_type = TUNER_ABSENT,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_UNKNOWN] = {
+ .name = "Unknown EM2750/28xx video grabber",
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1, /* To enable sensor probe */
+ },
+ [EM2750_BOARD_DLCW_130] = {
+ /* Beijing Huaqi Information Digital Technology Co., Ltd */
+ .name = "Huaqi DLCW-130",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ } },
+ },
+ [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
+ .name = "Kworld PVR TV 2800 RF",
+ .tuner_type = TUNER_TEMIC_PAL,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_GADMEI_TVR200] = {
+ .name = "Gadmei TVR200",
+ .tuner_type = TUNER_LG_PAL_NEW_TAPC,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_TERRATEC_CINERGY_250] = {
+ .name = "Terratec Cinergy 250 USB",
+ .tuner_type = TUNER_LG_PAL_NEW_TAPC,
+ .has_ir_i2c = 1,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_PINNACLE_USB_2] = {
+ .name = "Pinnacle PCTV USB 2",
+ .tuner_type = TUNER_LG_PAL_NEW_TAPC,
+ .has_ir_i2c = 1,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
+ .name = "Hauppauge WinTV USB 2",
+ .tuner_type = TUNER_PHILIPS_FM1236_MK3,
+ .tda9887_conf = TDA9887_PRESENT |
+ TDA9887_PORT1_ACTIVE |
+ TDA9887_PORT2_ACTIVE,
+ .decoder = EM28XX_TVP5150,
+ .has_msp34xx = 1,
+ .has_ir_i2c = 1,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = MSP_INPUT_DEFAULT,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
+ MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
+ } },
+ },
+ [EM2820_BOARD_DLINK_USB_TV] = {
+ .name = "D-Link DUB-T210 TV Tuner",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_LG_PAL_NEW_TAPC,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
+ .name = "Hercules Smart TV USB 2.0",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_LG_PAL_NEW_TAPC,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
+ .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_GADMEI_UTV310] = {
+ .name = "Gadmei UTV310",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_TNF_5335MF,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
+ .name = "Leadtek Winfast USB II Deluxe",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
+ .has_ir_i2c = 1,
+ .tvaudio_addr = 0x58,
+ .tda9887_conf = TDA9887_PRESENT |
+ TDA9887_PORT2_ACTIVE |
+ TDA9887_QSS,
+ .decoder = EM28XX_SAA711X,
+ .adecoder = EM28XX_TVAUDIO,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE4,
+ .amux = EM28XX_AMUX_AUX,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE5,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ .radio = {
+ .type = EM28XX_RADIO,
+ .amux = EM28XX_AMUX_AUX,
+ }
+ },
+ [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
+ .name = "Videology 20K14XUSB USB2.0",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ } },
+ },
+ [EM2820_BOARD_SILVERCREST_WEBCAM] = {
+ .name = "Silvercrest Webcam 1.3mpix",
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = silvercrest_reg_seq,
+ } },
+ },
+ [EM2821_BOARD_SUPERCOMP_USB_2] = {
+ .name = "Supercomp USB 2.0 TV",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_PHILIPS_FM1236_MK3,
+ .tda9887_conf = TDA9887_PRESENT |
+ TDA9887_PORT1_ACTIVE |
+ TDA9887_PORT2_ACTIVE,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2821_BOARD_USBGEAR_VD204] = {
+ .name = "Usbgear VD204v9",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_ABSENT, /* Capture only device */
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2860_BOARD_NETGMBH_CAM] = {
+ /* Beijing Huaqi Information Digital Technology Co., Ltd */
+ .name = "NetGMBH Cam",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ } },
+ },
+ [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
+ .name = "Typhoon DVD Maker",
+ .decoder = EM28XX_SAA711X,
+ .tuner_type = TUNER_ABSENT, /* Capture only device */
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2860_BOARD_GADMEI_UTV330] = {
+ .name = "Gadmei UTV330",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_TNF_5335MF,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2861_BOARD_GADMEI_UTV330PLUS] = {
+ .name = "Gadmei UTV330+",
+ .tuner_type = TUNER_TNF_5335MF,
+ .tda9887_conf = TDA9887_PRESENT,
+ .ir_codes = RC_MAP_GADMEI_RM008Z,
+ .decoder = EM28XX_SAA711X,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
+ .name = "Terratec Cinergy A Hybrid XS",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ } },
+ },
+ [EM2861_BOARD_KWORLD_PVRTV_300U] = {
+ .name = "KWorld PVRTV 300U",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
+ .name = "Yakumo MovieMixer",
+ .tuner_type = TUNER_ABSENT, /* Capture only device */
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
+ .name = "EM2860/TVP5150 Reference Design",
+ .tuner_type = TUNER_ABSENT, /* Capture only device */
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
+ .name = "Plextor ConvertX PX-TV100U",
+ .tuner_type = TUNER_TNF_5335MF,
+ .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
+ EM28XX_XCLK_FREQUENCY_12MHZ,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_TVP5150,
+ .has_msp34xx = 1,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
+ } },
+ },
+
+ /* Those boards with em2870 are DVB Only*/
+
+ [EM2870_BOARD_TERRATEC_XS] = {
+ .name = "Terratec Cinergy T XS",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ },
+ [EM2870_BOARD_TERRATEC_XS_MT2060] = {
+ .name = "Terratec Cinergy T XS (MT2060)",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_ABSENT, /* MT2060 */
+ },
+ [EM2870_BOARD_KWORLD_350U] = {
+ .name = "Kworld 350 U DVB-T",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ },
+ [EM2870_BOARD_KWORLD_355U] = {
+ .name = "Kworld 355 U DVB-T",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = default_tuner_gpio,
+ .has_dvb = 1,
+ .dvb_gpio = default_digital,
+ },
+ [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
+ .name = "Pinnacle PCTV DVB-T",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_ABSENT, /* MT2060 */
+ /* djh - I have serious doubts this is right... */
+ .xclk = EM28XX_XCLK_IR_RC5_MODE |
+ EM28XX_XCLK_FREQUENCY_10MHZ,
+ },
+ [EM2870_BOARD_COMPRO_VIDEOMATE] = {
+ .name = "Compro, VideoMate U3",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_ABSENT, /* MT2060 */
+ },
+
+ [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
+ .name = "Terratec Hybrid XS Secam",
+ .has_msp34xx = 1,
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .has_dvb = 1,
+ .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = terratec_cinergy_USB_XS_FR_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = terratec_cinergy_USB_XS_FR_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = terratec_cinergy_USB_XS_FR_analog,
+ } },
+ },
+ [EM2884_BOARD_TERRATEC_H5] = {
+ .name = "Terratec Cinergy H5",
+ .has_dvb = 1,
+#if 0
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .tuner_addr = 0x41,
+ .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
+ .tuner_gpio = terratec_h5_gpio,
+#else
+ .tuner_type = TUNER_ABSENT,
+#endif
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
+ [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
+ .name = "Hauppauge WinTV HVR 930C",
+ .has_dvb = 1,
+#if 0 /* FIXME: Add analog support */
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0x41,
+ .dvb_gpio = hauppauge_930c_digital,
+ .tuner_gpio = hauppauge_930c_gpio,
+#else
+ .tuner_type = TUNER_ABSENT,
+#endif
+ .ir_codes = RC_MAP_HAUPPAUGE,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
+ [EM2884_BOARD_C3TECH_DIGITAL_DUO] = {
+ .name = "C3 Tech Digital Duo HDTV/SDTV USB",
+ .has_dvb = 1,
+ /* FIXME: Add analog support - need a saa7136 driver */
+ .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
+ .ir_codes = RC_MAP_EMPTY,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
+ .dvb_gpio = c3tech_digital_duo_digital,
+ },
+ [EM2884_BOARD_CINERGY_HTC_STICK] = {
+ .name = "Terratec Cinergy HTC Stick",
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
+ .tuner_type = TUNER_ABSENT,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
+ [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = {
+ .name = "Elgato EyeTV Hybrid 2008 INT",
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
+ .tuner_type = TUNER_ABSENT,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
+ [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
+ .name = "Hauppauge WinTV HVR 900",
+ .tda9887_conf = TDA9887_PRESENT,
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
+ .ir_codes = RC_MAP_HAUPPAUGE,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ } },
+ },
+ [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
+ .name = "Hauppauge WinTV HVR 900 (R2)",
+ .tda9887_conf = TDA9887_PRESENT,
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
+ .ir_codes = RC_MAP_HAUPPAUGE,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ } },
+ },
+ [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
+ .name = "Hauppauge WinTV HVR 850",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
+ .ir_codes = RC_MAP_HAUPPAUGE,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ } },
+ },
+ [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
+ .name = "Hauppauge WinTV HVR 950",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
+ .ir_codes = RC_MAP_HAUPPAUGE,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ } },
+ },
+ [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
+ .name = "Pinnacle PCTV HD Pro Stick",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ } },
+ },
+ [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
+ .name = "AMD ATI TV Wonder HD 600",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
+ .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ } },
+ },
+ [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
+ .name = "Terratec Hybrid XS",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .has_dvb = 1,
+ .dvb_gpio = default_digital,
+ .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
+ } },
+ },
+ /* maybe there's a reason behind it why Terratec sells the Hybrid XS
+ as Prodigy XS with a different PID, let's keep it separated for now
+ maybe we'll need it lateron */
+ [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
+ .name = "Terratec Prodigy XS",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ } },
+ },
+ [EM2820_BOARD_MSI_VOX_USB_2] = {
+ .name = "MSI VOX USB 2.0",
+ .tuner_type = TUNER_LG_PAL_NEW_TAPC,
+ .tda9887_conf = TDA9887_PRESENT |
+ TDA9887_PORT1_ACTIVE |
+ TDA9887_PORT2_ACTIVE,
+ .max_range_640_480 = 1,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE4,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2800_BOARD_TERRATEC_CINERGY_200] = {
+ .name = "Terratec Cinergy 200 USB",
+ .is_em2800 = 1,
+ .has_ir_i2c = 1,
+ .tuner_type = TUNER_LG_TALN,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2800_BOARD_GRABBEEX_USB2800] = {
+ .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
+ .is_em2800 = 1,
+ .decoder = EM28XX_SAA711X,
+ .tuner_type = TUNER_ABSENT, /* capture only board */
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2800_BOARD_VC211A] = {
+ .name = "Actionmaster/LinXcel/Digitus VC211A",
+ .is_em2800 = 1,
+ .tuner_type = TUNER_ABSENT, /* Capture-only board */
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = vc211a_enable,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = vc211a_enable,
+ } },
+ },
+ [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
+ .name = "Leadtek Winfast USB II",
+ .is_em2800 = 1,
+ .tuner_type = TUNER_LG_PAL_NEW_TAPC,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2800_BOARD_KWORLD_USB2800] = {
+ .name = "Kworld USB2800",
+ .is_em2800 = 1,
+ .tuner_type = TUNER_PHILIPS_FCV1236D,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_PINNACLE_DVC_90] = {
+ .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
+ "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
+ .tuner_type = TUNER_ABSENT, /* capture only board */
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2800_BOARD_VGEAR_POCKETTV] = {
+ .name = "V-Gear PocketTV",
+ .is_em2800 = 1,
+ .tuner_type = TUNER_LG_PAL_NEW_TAPC,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
+ .name = "Pixelview PlayTV Box 4 USB 2.0",
+ .tda9887_conf = TDA9887_PRESENT,
+ .tuner_type = TUNER_YMEC_TVF_5533MF,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ .aout = EM28XX_AOUT_MONO | /* I2S */
+ EM28XX_AOUT_MASTER, /* Line out pin */
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
+ .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
+ .buttons = std_snapshot_button,
+ .tda9887_conf = TDA9887_PRESENT,
+ .tuner_type = TUNER_YMEC_TVF_5533MF,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ .aout = EM28XX_AOUT_MONO | /* I2S */
+ EM28XX_AOUT_MASTER, /* Line out pin */
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
+ .name = "EM2860/SAA711X Reference Design",
+ .buttons = std_snapshot_button,
+ .tuner_type = TUNER_ABSENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ } },
+ },
+
+ [EM2874_BOARD_LEADERSHIP_ISDBT] = {
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_100_KHZ,
+ .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
+ .name = "EM2874 Leadership ISDBT",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = leadership_reset,
+ .dvb_gpio = leadership_digital,
+ .has_dvb = 1,
+ },
+
+ [EM2880_BOARD_MSI_DIGIVOX_AD] = {
+ .name = "MSI DigiVox A/D",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = em2880_msi_digivox_ad_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2880_msi_digivox_ad_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2880_msi_digivox_ad_analog,
+ } },
+ },
+ [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
+ .name = "MSI DigiVox A/D II",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = em2880_msi_digivox_ad_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2880_msi_digivox_ad_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2880_msi_digivox_ad_analog,
+ } },
+ },
+ [EM2880_BOARD_KWORLD_DVB_305U] = {
+ .name = "KWorld DVB-T 305U",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2880_BOARD_KWORLD_DVB_310U] = {
+ .name = "KWorld DVB-T 310U",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .has_dvb = 1,
+ .dvb_gpio = default_digital,
+ .mts_firmware = 1,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
+ }, { /* S-video has not been tested yet */
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
+ } },
+ },
+ [EM2882_BOARD_KWORLD_ATSC_315U] = {
+ .name = "KWorld ATSC 315U HDTV TV Box",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_THOMSON_DTT761X,
+ .tuner_gpio = em2882_kworld_315u_tuner_gpio,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .has_dvb = 1,
+ .dvb_gpio = em2882_kworld_315u_digital,
+ .ir_codes = RC_MAP_KWORLD_315U,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
+ /* Analog mode - still not ready */
+ /*.input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = em2882_kworld_315u_analog,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2882_kworld_315u_analog1,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2882_kworld_315u_analog1,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ } }, */
+ },
+ [EM2880_BOARD_EMPIRE_DUAL_TV] = {
+ .name = "Empire dual TV",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .has_dvb = 1,
+ .dvb_gpio = default_digital,
+ .mts_firmware = 1,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
+ } },
+ },
+ [EM2881_BOARD_DNT_DA2_HYBRID] = {
+ .name = "DNT DA2 Hybrid",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
+ } },
+ },
+ [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
+ .name = "Pinnacle Hybrid Pro",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .has_dvb = 1,
+ .dvb_gpio = pinnacle_hybrid_pro_digital,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = pinnacle_hybrid_pro_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
+ } },
+ },
+ [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
+ .name = "Pinnacle Hybrid Pro (330e)",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ } },
+ },
+ [EM2882_BOARD_KWORLD_VS_DVBT] = {
+ .name = "Kworld VS-DVB-T 323UR",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = kworld_330u_digital,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
+ .ir_codes = RC_MAP_KWORLD_315U,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
+ .name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
+ .decoder = EM28XX_TVP5150,
+ .has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
+ .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ } },
+ },
+ [EM2882_BOARD_DIKOM_DK300] = {
+ .name = "Dikom DK300",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = dikom_dk300_digital,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
+ } },
+ },
+ [EM2883_BOARD_KWORLD_HYBRID_330U] = {
+ .name = "Kworld PlusTV HD Hybrid 330",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = kworld_330u_digital,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_EEPROM_ON_BOARD |
+ EM28XX_I2C_EEPROM_KEY_VALID,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = kworld_330u_analog,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = kworld_330u_analog,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = kworld_330u_analog,
+ } },
+ },
+ [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
+ .name = "Compro VideoMate ForYou/Stereo",
+ .tuner_type = TUNER_LG_PAL_NEW_TAPC,
+ .tvaudio_addr = 0xb0,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_TVP5150,
+ .adecoder = EM28XX_TVAUDIO,
+ .mute_gpio = compro_mute_gpio,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = compro_unmute_tv_gpio,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = compro_unmute_svid_gpio,
+ } },
+ },
+ [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
+ .name = "Kaiomy TVnPC U2",
+ .vchannels = 3,
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .mts_firmware = 1,
+ .decoder = EM28XX_TVP5150,
+ .tuner_gpio = default_tuner_gpio,
+ .ir_codes = RC_MAP_KAIOMY,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ .radio = {
+ .type = EM28XX_RADIO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }
+ },
+ [EM2860_BOARD_EASYCAP] = {
+ .name = "Easy Cap Capture DC-60",
+ .vchannels = 2,
+ .tuner_type = TUNER_ABSENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2820_BOARD_IODATA_GVMVP_SZ] = {
+ .name = "IO-DATA GV-MVP/SZ",
+ .tuner_type = TUNER_PHILIPS_FM1236_MK3,
+ .tuner_gpio = default_tuner_gpio,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, { /* Composite has not been tested yet */
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_VIDEO,
+ }, { /* S-video has not been tested yet */
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_VIDEO,
+ } },
+ },
+ [EM2860_BOARD_TERRATEC_GRABBY] = {
+ .name = "Terratec Grabby",
+ .vchannels = 2,
+ .tuner_type = TUNER_ABSENT,
+ .decoder = EM28XX_SAA711X,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2860_BOARD_TERRATEC_AV350] = {
+ .name = "Terratec AV350",
+ .vchannels = 2,
+ .tuner_type = TUNER_ABSENT,
+ .decoder = EM28XX_TVP5150,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .mute_gpio = terratec_av350_mute_gpio,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AUDIO_SRC_LINE,
+ .gpio = terratec_av350_unmute_gpio,
+
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AUDIO_SRC_LINE,
+ .gpio = terratec_av350_unmute_gpio,
+ } },
+ },
+
+ [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
+ .name = "Elgato Video Capture",
+ .decoder = EM28XX_SAA711X,
+ .tuner_type = TUNER_ABSENT, /* Capture only device */
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+
+ [EM2882_BOARD_EVGA_INDTUBE] = {
+ .name = "Evga inDtube",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = evga_indtube_digital,
+ .ir_codes = RC_MAP_EVGA_INDTUBE,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = evga_indtube_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = evga_indtube_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = evga_indtube_analog,
+ } },
+ },
+ /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
+ Infineon TUA6034) */
+ [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
+ .name = "Reddo DVB-C USB TV Box",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = reddo_dvb_c_usb_box,
+ .has_dvb = 1,
+ },
+ /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
+ * initially as the KWorld PlusTV 340U, then as the UB435-Q.
+ * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
+ [EM2870_BOARD_KWORLD_A340] = {
+ .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
+ .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
+ .has_dvb = 1,
+ .dvb_gpio = kworld_a340_digital,
+ .tuner_gpio = default_tuner_gpio,
+ },
+ /* 2013:024f PCTV nanoStick T2 290e.
+ * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
+ [EM28174_BOARD_PCTV_290E] = {
+ .name = "PCTV nanoStick T2 290e",
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = pctv_290e,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ },
+ /* 2013:024f PCTV DVB-S2 Stick 460e
+ * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
+ [EM28174_BOARD_PCTV_460E] = {
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
+ .name = "PCTV DVB-S2 Stick (460e)",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = pctv_460e,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ },
+ /* eb1a:5006 Honestech VIDBOX NW03
+ * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */
+ [EM2860_BOARD_HT_VIDBOX_NW03] = {
+ .name = "Honestech Vidbox NW03",
+ .tuner_type = TUNER_ABSENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ /* 1b80:e425 MaxMedia UB425-TC
+ * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */
+ [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
+ .name = "MaxMedia UB425-TC",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = maxmedia_ub425_tc,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_REDDO,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
+ /* 2304:0242 PCTV QuatroStick (510e)
+ * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
+ [EM2884_BOARD_PCTV_510E] = {
+ .name = "PCTV QuatroStick (510e)",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = pctv_510e,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
+ /* 2013:0251 PCTV QuatroStick nano (520e)
+ * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
+ [EM2884_BOARD_PCTV_520E] = {
+ .name = "PCTV QuatroStick nano (520e)",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = pctv_520e,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
+ [EM2884_BOARD_TERRATEC_HTC_USB_XS] = {
+ .name = "Terratec Cinergy HTC USB XS",
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
+ .tuner_type = TUNER_ABSENT,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
+ /* 1b80:e1cc Delock 61959
+ * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
+ * mostly the same as MaxMedia UB-425-TC but different remote */
+ [EM2874_BOARD_DELOCK_61959] = {
+ .name = "Delock 61959",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = maxmedia_ub425_tc,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_DELOCK_61959,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
+ /*
+ * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2
+ * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
+ */
+ [EM2874_BOARD_KWORLD_UB435Q_V2] = {
+ .name = "KWorld USB ATSC TV Stick UB435-Q V2",
+ .tuner_type = TUNER_ABSENT,
+ .has_dvb = 1,
+ .dvb_gpio = kworld_a340_digital,
+ .tuner_gpio = default_tuner_gpio,
+ .def_i2c_bus = 1,
+ },
+ /*
+ * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3
+ * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
+ */
+ [EM2874_BOARD_KWORLD_UB435Q_V3] = {
+ .name = "KWorld USB ATSC TV Stick UB435-Q V3",
+ .tuner_type = TUNER_ABSENT,
+ .has_dvb = 1,
+ .tuner_gpio = kworld_ub435q_v3_digital,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_100_KHZ,
+ .leds = kworld_ub435q_v3_leds,
+ },
+ [EM2874_BOARD_PCTV_HD_MINI_80E] = {
+ .name = "Pinnacle PCTV HD Mini",
+ .tuner_type = TUNER_ABSENT,
+ .has_dvb = 1,
+ .dvb_gpio = em2874_pctv_80e_digital,
+ .decoder = EM28XX_NODECODER,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ .leds = pctv_80e_leds,
+ },
+ /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
+ * Empia EM2765 + OmniVision OV2640 */
+ [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = {
+ .name = "SpeedLink Vicious And Devine Laplace webcam",
+ .xclk = EM28XX_XCLK_FREQUENCY_24MHZ,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_100_KHZ,
+ .def_i2c_bus = 1,
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = speedlink_vad_laplace_reg_seq,
+ } },
+ .buttons = speedlink_vad_laplace_buttons,
+ .leds = speedlink_vad_laplace_leds,
+ },
+ /* 2013:0258 PCTV DVB-S2 Stick (461e)
+ * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */
+ [EM28178_BOARD_PCTV_461E] = {
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
+ .name = "PCTV DVB-S2 Stick (461e)",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = pctv_461e,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ },
+ /* 2013:025f PCTV tripleStick (292e).
+ * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 */
+ [EM28178_BOARD_PCTV_292E] = {
+ .name = "PCTV tripleStick (292e)",
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = pctv_292e,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ },
+ [EM2861_BOARD_LEADTEK_VC100] = {
+ .name = "Leadtek VC100",
+ .tuner_type = TUNER_ABSENT, /* Capture only device */
+ .decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ /* eb1a:8179 Terratec Cinergy T2 Stick HD.
+ * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 */
+ [EM28178_BOARD_TERRATEC_T2_STICK_HD] = {
+ .name = "Terratec Cinergy T2 Stick HD",
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = terratec_t2_stick_hd,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_TERRATEC_SLIM_2,
+ },
+};
+EXPORT_SYMBOL_GPL(em28xx_boards);
+
+static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
+
+/* table of devices that work with this driver */
+struct usb_device_id em28xx_id_table[] = {
+ { USB_DEVICE(0xeb1a, 0x2750),
+ .driver_info = EM2750_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2751),
+ .driver_info = EM2750_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2800),
+ .driver_info = EM2800_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2710),
+ .driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2820),
+ .driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2821),
+ .driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2860),
+ .driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2861),
+ .driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2862),
+ .driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2863),
+ .driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2870),
+ .driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2881),
+ .driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2883),
+ .driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2868),
+ .driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2875),
+ .driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */
+ .driver_info = EM2884_BOARD_TERRATEC_H5 },
+ { USB_DEVICE(0xeb1a, 0xe300),
+ .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
+ { USB_DEVICE(0xeb1a, 0xe303),
+ .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
+ { USB_DEVICE(0xeb1a, 0xe305),
+ .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
+ { USB_DEVICE(0xeb1a, 0xe310),
+ .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
+ { USB_DEVICE(0xeb1a, 0xa313),
+ .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
+ { USB_DEVICE(0xeb1a, 0xa316),
+ .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
+ { USB_DEVICE(0xeb1a, 0xe320),
+ .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
+ { USB_DEVICE(0xeb1a, 0xe323),
+ .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
+ { USB_DEVICE(0xeb1a, 0xe350),
+ .driver_info = EM2870_BOARD_KWORLD_350U },
+ { USB_DEVICE(0xeb1a, 0xe355),
+ .driver_info = EM2870_BOARD_KWORLD_355U },
+ { USB_DEVICE(0xeb1a, 0x2801),
+ .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
+ { USB_DEVICE(0xeb1a, 0xe357),
+ .driver_info = EM2870_BOARD_KWORLD_355U },
+ { USB_DEVICE(0xeb1a, 0xe359),
+ .driver_info = EM2870_BOARD_KWORLD_355U },
+ { USB_DEVICE(0x1b80, 0xe302),
+ .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
+ { USB_DEVICE(0x1b80, 0xe304),
+ .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
+ { USB_DEVICE(0x0ccd, 0x0036),
+ .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
+ { USB_DEVICE(0x0ccd, 0x004c),
+ .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
+ { USB_DEVICE(0x0ccd, 0x004f),
+ .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
+ { USB_DEVICE(0x0ccd, 0x005e),
+ .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
+ { USB_DEVICE(0x0ccd, 0x0042),
+ .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
+ { USB_DEVICE(0x0ccd, 0x0043),
+ .driver_info = EM2870_BOARD_TERRATEC_XS },
+ { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
+ .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
+ { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
+ .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
+ { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
+ .driver_info = EM2884_BOARD_TERRATEC_H5 },
+ { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */
+ .driver_info = EM2884_BOARD_TERRATEC_H5 },
+ { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */
+ .driver_info = EM2884_BOARD_TERRATEC_H5 },
+ { USB_DEVICE(0x0ccd, 0x0084),
+ .driver_info = EM2860_BOARD_TERRATEC_AV350 },
+ { USB_DEVICE(0x0ccd, 0x0096),
+ .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
+ { USB_DEVICE(0x0ccd, 0x10AF),
+ .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
+ { USB_DEVICE(0x0ccd, 0x00b2),
+ .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
+ { USB_DEVICE(0x0fd9, 0x0018),
+ .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 },
+ { USB_DEVICE(0x0fd9, 0x0033),
+ .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE },
+ { USB_DEVICE(0x185b, 0x2870),
+ .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
+ { USB_DEVICE(0x185b, 0x2041),
+ .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
+ { USB_DEVICE(0x2040, 0x4200),
+ .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
+ { USB_DEVICE(0x2040, 0x4201),
+ .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
+ { USB_DEVICE(0x2040, 0x6500),
+ .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
+ { USB_DEVICE(0x2040, 0x6502),
+ .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
+ { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
+ .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+ { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
+ .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+ { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
+ .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+ { USB_DEVICE(0x2040, 0x651f),
+ .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
+ { USB_DEVICE(0x0438, 0xb002),
+ .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
+ { USB_DEVICE(0x2001, 0xf112),
+ .driver_info = EM2820_BOARD_DLINK_USB_TV },
+ { USB_DEVICE(0x2304, 0x0207),
+ .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
+ { USB_DEVICE(0x2304, 0x0208),
+ .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
+ { USB_DEVICE(0x2304, 0x021a),
+ .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
+ { USB_DEVICE(0x2304, 0x0226),
+ .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
+ { USB_DEVICE(0x2304, 0x0227),
+ .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
+ { USB_DEVICE(0x2304, 0x023f),
+ .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E },
+ { USB_DEVICE(0x0413, 0x6023),
+ .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
+ { USB_DEVICE(0x093b, 0xa003),
+ .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
+ { USB_DEVICE(0x093b, 0xa005),
+ .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
+ { USB_DEVICE(0x04bb, 0x0515),
+ .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
+ { USB_DEVICE(0xeb1a, 0x50a6),
+ .driver_info = EM2860_BOARD_GADMEI_UTV330 },
+ { USB_DEVICE(0x1b80, 0xa340),
+ .driver_info = EM2870_BOARD_KWORLD_A340 },
+ { USB_DEVICE(0x1b80, 0xe346),
+ .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 },
+ { USB_DEVICE(0x1b80, 0xe34c),
+ .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 },
+ { USB_DEVICE(0x2013, 0x024f),
+ .driver_info = EM28174_BOARD_PCTV_290E },
+ { USB_DEVICE(0x2013, 0x024c),
+ .driver_info = EM28174_BOARD_PCTV_460E },
+ { USB_DEVICE(0x2040, 0x1605),
+ .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
+ { USB_DEVICE(0x1b80, 0xe755),
+ .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO },
+ { USB_DEVICE(0xeb1a, 0x5006),
+ .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
+ { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
+ .driver_info = EM2860_BOARD_EASYCAP },
+ { USB_DEVICE(0x1b80, 0xe425),
+ .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
+ { USB_DEVICE(0x2304, 0x0242),
+ .driver_info = EM2884_BOARD_PCTV_510E },
+ { USB_DEVICE(0x2013, 0x0251),
+ .driver_info = EM2884_BOARD_PCTV_520E },
+ { USB_DEVICE(0x1b80, 0xe1cc),
+ .driver_info = EM2874_BOARD_DELOCK_61959 },
+ { USB_DEVICE(0x1ae7, 0x9003),
+ .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
+ { USB_DEVICE(0x1ae7, 0x9004),
+ .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
+ { USB_DEVICE(0x2013, 0x0258),
+ .driver_info = EM28178_BOARD_PCTV_461E },
+ { USB_DEVICE(0x2013, 0x025f),
+ .driver_info = EM28178_BOARD_PCTV_292E },
+ { USB_DEVICE(0x0413, 0x6f07),
+ .driver_info = EM2861_BOARD_LEADTEK_VC100 },
+ { USB_DEVICE(0xeb1a, 0x8179),
+ .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, em28xx_id_table);
+
+/*
+ * EEPROM hash table for devices with generic USB IDs
+ */
+static struct em28xx_hash_table em28xx_eeprom_hash[] = {
+ /* P/N: SA 60002070465 Tuner: TVF7533-MF */
+ {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
+ {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
+ {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
+ {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
+ {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
+ {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
+ {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
+ {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
+};
+
+/* I2C devicelist hash table for devices with generic USB IDs */
+static struct em28xx_hash_table em28xx_i2c_hash[] = {
+ {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
+ {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
+ {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
+ {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
+ {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
+ {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
+ {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
+};
+
+/* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
+
+int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
+{
+ struct em28xx_i2c_bus *i2c_bus = ptr;
+ struct em28xx *dev = i2c_bus->dev;
+ int rc = 0;
+
+ if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
+ return 0;
+
+ if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
+ return 0;
+
+ rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
+
+static inline void em28xx_set_model(struct em28xx *dev)
+{
+ dev->board = em28xx_boards[dev->model];
+
+ /* Those are the default values for the majority of boards
+ Use those values if not specified otherwise at boards entry
+ */
+ if (!dev->board.xclk)
+ dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
+ EM28XX_XCLK_FREQUENCY_12MHZ;
+
+ if (!dev->board.i2c_speed)
+ dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_100_KHZ;
+
+ /* Should be initialized early, for I2C to work */
+ dev->def_i2c_bus = dev->board.def_i2c_bus;
+}
+
+/* Since em28xx_pre_card_setup() requires a proper dev->model,
+ * this won't work for boards with generic PCI IDs
+ */
+static void em28xx_pre_card_setup(struct em28xx *dev)
+{
+ /* Set the initial XCLK and I2C clock values based on the board
+ definition */
+ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
+ if (!dev->board.is_em2800)
+ em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
+ msleep(50);
+
+ /* request some modules */
+ switch (dev->model) {
+ case EM2861_BOARD_PLEXTOR_PX_TV100U:
+ /* Sets the msp34xx I2S speed */
+ dev->i2s_speed = 2048000;
+ break;
+ case EM2861_BOARD_KWORLD_PVRTV_300U:
+ case EM2880_BOARD_KWORLD_DVB_305U:
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d);
+ msleep(10);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d);
+ msleep(10);
+ break;
+ case EM2870_BOARD_COMPRO_VIDEOMATE:
+ /* TODO: someone can do some cleanup here...
+ not everything's needed */
+ em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
+ msleep(10);
+ em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
+ msleep(10);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
+ mdelay(70);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
+ mdelay(70);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc);
+ mdelay(70);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
+ mdelay(70);
+ break;
+ case EM2870_BOARD_TERRATEC_XS_MT2060:
+ /* this device needs some gpio writes to get the DVB-T
+ demod work */
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
+ mdelay(70);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
+ mdelay(70);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
+ mdelay(70);
+ break;
+ case EM2870_BOARD_PINNACLE_PCTV_DVB:
+ /* this device needs some gpio writes to get the
+ DVB-T demod work */
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
+ mdelay(70);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
+ mdelay(70);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
+ mdelay(70);
+ break;
+ case EM2820_BOARD_GADMEI_UTV310:
+ case EM2820_BOARD_MSI_VOX_USB_2:
+ /* enables audio for that devices */
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
+ break;
+
+ case EM2882_BOARD_KWORLD_ATSC_315U:
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
+ msleep(10);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
+ msleep(10);
+ em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
+ msleep(10);
+ em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
+ msleep(10);
+ break;
+
+ case EM2860_BOARD_KAIOMY_TVNPC_U2:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ em28xx_write_regs(dev, 0x0d, "\x42", 1);
+ em28xx_write_regs(dev, 0x08, "\xfd", 1);
+ msleep(10);
+ em28xx_write_regs(dev, 0x08, "\xff", 1);
+ msleep(10);
+ em28xx_write_regs(dev, 0x08, "\x7f", 1);
+ msleep(10);
+ em28xx_write_regs(dev, 0x08, "\x6b", 1);
+
+ break;
+ case EM2860_BOARD_EASYCAP:
+ em28xx_write_regs(dev, 0x08, "\xf8", 1);
+ break;
+
+ case EM2820_BOARD_IODATA_GVMVP_SZ:
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
+ msleep(70);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
+ msleep(10);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
+ msleep(70);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
+ msleep(70);
+ break;
+ }
+
+ em28xx_gpio_set(dev, dev->board.tuner_gpio);
+ em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
+
+ /* Unlock device */
+ em28xx_set_mode(dev, EM28XX_SUSPEND);
+}
+
+static int em28xx_hint_board(struct em28xx *dev)
+{
+ int i;
+
+ if (dev->board.is_webcam) {
+ if (dev->em28xx_sensor == EM28XX_MT9V011) {
+ dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
+ } else if (dev->em28xx_sensor == EM28XX_MT9M001 ||
+ dev->em28xx_sensor == EM28XX_MT9M111) {
+ dev->model = EM2750_BOARD_UNKNOWN;
+ }
+ /* FIXME: IMPROVE ! */
+
+ return 0;
+ }
+
+ /* HINT method: EEPROM
+ *
+ * This method works only for boards with eeprom.
+ * Uses a hash of all eeprom bytes. The hash should be
+ * unique for a vendor/tuner pair.
+ * There are a high chance that tuners for different
+ * video standards produce different hashes.
+ */
+ for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
+ if (dev->hash == em28xx_eeprom_hash[i].hash) {
+ dev->model = em28xx_eeprom_hash[i].model;
+ dev->tuner_type = em28xx_eeprom_hash[i].tuner;
+
+ em28xx_errdev("Your board has no unique USB ID.\n");
+ em28xx_errdev("A hint were successfully done, "
+ "based on eeprom hash.\n");
+ em28xx_errdev("This method is not 100%% failproof.\n");
+ em28xx_errdev("If the board were missdetected, "
+ "please email this log to:\n");
+ em28xx_errdev("\tV4L Mailing List "
+ " <linux-media@vger.kernel.org>\n");
+ em28xx_errdev("Board detected as %s\n",
+ em28xx_boards[dev->model].name);
+
+ return 0;
+ }
+ }
+
+ /* HINT method: I2C attached devices
+ *
+ * This method works for all boards.
+ * Uses a hash of i2c scanned devices.
+ * Devices with the same i2c attached chips will
+ * be considered equal.
+ * This method is less precise than the eeprom one.
+ */
+
+ /* user did not request i2c scanning => do it now */
+ if (!dev->i2c_hash)
+ em28xx_do_i2c_scan(dev, dev->def_i2c_bus);
+
+ for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
+ if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
+ dev->model = em28xx_i2c_hash[i].model;
+ dev->tuner_type = em28xx_i2c_hash[i].tuner;
+ em28xx_errdev("Your board has no unique USB ID.\n");
+ em28xx_errdev("A hint were successfully done, "
+ "based on i2c devicelist hash.\n");
+ em28xx_errdev("This method is not 100%% failproof.\n");
+ em28xx_errdev("If the board were missdetected, "
+ "please email this log to:\n");
+ em28xx_errdev("\tV4L Mailing List "
+ " <linux-media@vger.kernel.org>\n");
+ em28xx_errdev("Board detected as %s\n",
+ em28xx_boards[dev->model].name);
+
+ return 0;
+ }
+ }
+
+ em28xx_errdev("Your board has no unique USB ID and thus need a "
+ "hint to be detected.\n");
+ em28xx_errdev("You may try to use card=<n> insmod option to "
+ "workaround that.\n");
+ em28xx_errdev("Please send an email with this log to:\n");
+ em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
+ em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
+ em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
+
+ em28xx_errdev("Here is a list of valid choices for the card=<n>"
+ " insmod option:\n");
+ for (i = 0; i < em28xx_bcount; i++) {
+ em28xx_errdev(" card=%d -> %s\n",
+ i, em28xx_boards[i].name);
+ }
+ return -1;
+}
+
+static void em28xx_card_setup(struct em28xx *dev)
+{
+ /*
+ * If the device can be a webcam, seek for a sensor.
+ * If sensor is not found, then it isn't a webcam.
+ */
+ if (dev->board.is_webcam) {
+ if (em28xx_detect_sensor(dev) < 0)
+ dev->board.is_webcam = 0;
+ }
+
+ switch (dev->model) {
+ case EM2750_BOARD_UNKNOWN:
+ case EM2820_BOARD_UNKNOWN:
+ case EM2800_BOARD_UNKNOWN:
+ /*
+ * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
+ *
+ * This occurs because they share identical USB vendor and
+ * product IDs.
+ *
+ * What we do here is look up the EEPROM hash of the K-WORLD
+ * and if it is found then we decide that we do not have
+ * a DIGIVOX and reset the device to the K-WORLD instead.
+ *
+ * This solution is only valid if they do not share eeprom
+ * hash identities which has not been determined as yet.
+ */
+ if (em28xx_hint_board(dev) < 0)
+ em28xx_errdev("Board not discovered\n");
+ else {
+ em28xx_set_model(dev);
+ em28xx_pre_card_setup(dev);
+ }
+ break;
+ default:
+ em28xx_set_model(dev);
+ }
+
+ em28xx_info("Identified as %s (card=%d)\n",
+ dev->board.name, dev->model);
+
+ dev->tuner_type = em28xx_boards[dev->model].tuner_type;
+
+ /* request some modules */
+ switch (dev->model) {
+ case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
+ case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
+ case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
+ case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
+ {
+ struct tveeprom tv;
+
+ if (dev->eedata == NULL)
+ break;
+#if defined(CONFIG_MODULES) && defined(MODULE)
+ request_module("tveeprom");
+#endif
+ /* Call first TVeeprom */
+
+ dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1;
+ tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata);
+
+ dev->tuner_type = tv.tuner_type;
+
+ if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) {
+ dev->i2s_speed = 2048000;
+ dev->board.has_msp34xx = 1;
+ }
+ break;
+ }
+ case EM2882_BOARD_KWORLD_ATSC_315U:
+ em28xx_write_reg(dev, 0x0d, 0x42);
+ msleep(10);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
+ msleep(10);
+ break;
+ case EM2820_BOARD_KWORLD_PVRTV2800RF:
+ /* GPIO enables sound on KWORLD PVR TV 2800RF */
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9);
+ break;
+ case EM2820_BOARD_UNKNOWN:
+ case EM2800_BOARD_UNKNOWN:
+ /*
+ * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
+ *
+ * This occurs because they share identical USB vendor and
+ * product IDs.
+ *
+ * What we do here is look up the EEPROM hash of the K-WORLD
+ * and if it is found then we decide that we do not have
+ * a DIGIVOX and reset the device to the K-WORLD instead.
+ *
+ * This solution is only valid if they do not share eeprom
+ * hash identities which has not been determined as yet.
+ */
+ case EM2880_BOARD_MSI_DIGIVOX_AD:
+ if (!em28xx_hint_board(dev))
+ em28xx_set_model(dev);
+
+ /* In cases where we had to use a board hint, the call to
+ em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
+ so make the call now so the analog GPIOs are set properly
+ before probing the i2c bus. */
+ em28xx_gpio_set(dev, dev->board.tuner_gpio);
+ em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
+ break;
+
+ /*
+ * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
+ *
+ * This occurs because they share identical USB vendor and
+ * product IDs.
+ *
+ * What we do here is look up the EEPROM hash of the Dikom
+ * and if it is found then we decide that we do not have
+ * a Kworld and reset the device to the Dikom instead.
+ *
+ * This solution is only valid if they do not share eeprom
+ * hash identities which has not been determined as yet.
+ */
+ case EM2882_BOARD_KWORLD_VS_DVBT:
+ if (!em28xx_hint_board(dev))
+ em28xx_set_model(dev);
+
+ /* In cases where we had to use a board hint, the call to
+ em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
+ so make the call now so the analog GPIOs are set properly
+ before probing the i2c bus. */
+ em28xx_gpio_set(dev, dev->board.tuner_gpio);
+ em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
+ break;
+ }
+
+ if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
+ em28xx_errdev("\n\n");
+ em28xx_errdev("The support for this board weren't "
+ "valid yet.\n");
+ em28xx_errdev("Please send a report of having this working\n");
+ em28xx_errdev("not to V4L mailing list (and/or to other "
+ "addresses)\n\n");
+ }
+
+ /* Free eeprom data memory */
+ kfree(dev->eedata);
+ dev->eedata = NULL;
+
+ /* Allow override tuner type by a module parameter */
+ if (tuner >= 0)
+ dev->tuner_type = tuner;
+}
+
+void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
+{
+ memset(ctl, 0, sizeof(*ctl));
+
+ ctl->fname = XC2028_DEFAULT_FIRMWARE;
+ ctl->max_len = 64;
+ ctl->mts = em28xx_boards[dev->model].mts_firmware;
+
+ switch (dev->model) {
+ case EM2880_BOARD_EMPIRE_DUAL_TV:
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2882_BOARD_TERRATEC_HYBRID_XS:
+ ctl->demod = XC3028_FE_ZARLINK456;
+ break;
+ case EM2880_BOARD_TERRATEC_HYBRID_XS:
+ case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
+ case EM2881_BOARD_PINNACLE_HYBRID_PRO:
+ ctl->demod = XC3028_FE_ZARLINK456;
+ break;
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
+ case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
+ ctl->demod = XC3028_FE_DEFAULT;
+ break;
+ case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
+ ctl->demod = XC3028_FE_DEFAULT;
+ ctl->fname = XC3028L_DEFAULT_FIRMWARE;
+ break;
+ case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
+ case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
+ case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
+ /* FIXME: Better to specify the needed IF */
+ ctl->demod = XC3028_FE_DEFAULT;
+ break;
+ case EM2883_BOARD_KWORLD_HYBRID_330U:
+ case EM2882_BOARD_DIKOM_DK300:
+ case EM2882_BOARD_KWORLD_VS_DVBT:
+ ctl->demod = XC3028_FE_CHINA;
+ ctl->fname = XC2028_DEFAULT_FIRMWARE;
+ break;
+ case EM2882_BOARD_EVGA_INDTUBE:
+ ctl->demod = XC3028_FE_CHINA;
+ ctl->fname = XC3028L_DEFAULT_FIRMWARE;
+ break;
+ default:
+ ctl->demod = XC3028_FE_OREN538;
+ }
+}
+EXPORT_SYMBOL_GPL(em28xx_setup_xc3028);
+
+static void request_module_async(struct work_struct *work)
+{
+ struct em28xx *dev = container_of(work,
+ struct em28xx, request_module_wk);
+
+ /*
+ * The em28xx extensions can be modules or builtin. If the
+ * modules are already loaded or are built in, those extensions
+ * can be initialised right now. Otherwise, the module init
+ * code will do it.
+ */
+
+ /*
+ * Devicdes with an audio-only interface also have a V4L/DVB/RC
+ * interface. Don't register extensions twice on those devices.
+ */
+ if (dev->is_audio_only) {
+#if defined(CONFIG_MODULES) && defined(MODULE)
+ request_module("em28xx-alsa");
+#endif
+ return;
+ }
+
+ em28xx_init_extension(dev);
+
+#if defined(CONFIG_MODULES) && defined(MODULE)
+ if (dev->has_video)
+ request_module("em28xx-v4l");
+ if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS)
+ request_module("snd-usb-audio");
+ else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR)
+ request_module("em28xx-alsa");
+ if (dev->board.has_dvb)
+ request_module("em28xx-dvb");
+ if (dev->board.buttons ||
+ ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir))
+ request_module("em28xx-rc");
+#endif /* CONFIG_MODULES */
+}
+
+static void request_modules(struct em28xx *dev)
+{
+ INIT_WORK(&dev->request_module_wk, request_module_async);
+ schedule_work(&dev->request_module_wk);
+}
+
+static void flush_request_modules(struct em28xx *dev)
+{
+ flush_work(&dev->request_module_wk);
+}
+
+/*
+ * em28xx_release_resources()
+ * unregisters the v4l2,i2c and usb devices
+ * called when the device gets disconnected or at module unload
+*/
+static void em28xx_release_resources(struct em28xx *dev)
+{
+ /*FIXME: I2C IR should be disconnected */
+
+ mutex_lock(&dev->lock);
+
+ if (dev->def_i2c_bus)
+ em28xx_i2c_unregister(dev, 1);
+ em28xx_i2c_unregister(dev, 0);
+
+ usb_put_dev(dev->udev);
+
+ /* Mark device as unused */
+ clear_bit(dev->devno, em28xx_devused);
+
+ mutex_unlock(&dev->lock);
+};
+
+/**
+ * em28xx_free_device() - Free em28xx device
+ *
+ * @ref: struct kref for em28xx device
+ *
+ * This is called when all extensions and em28xx core unregisters a device
+ */
+void em28xx_free_device(struct kref *ref)
+{
+ struct em28xx *dev = kref_to_dev(ref);
+
+ em28xx_info("Freeing device\n");
+
+ if (!dev->disconnected)
+ em28xx_release_resources(dev);
+
+ kfree(dev->alt_max_pkt_size_isoc);
+ kfree(dev);
+}
+EXPORT_SYMBOL_GPL(em28xx_free_device);
+
+/*
+ * em28xx_init_dev()
+ * allocates and inits the device structs, registers i2c bus and v4l device
+ */
+static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
+ struct usb_interface *interface,
+ int minor)
+{
+ int retval;
+ static const char *default_chip_name = "em28xx";
+ const char *chip_name = default_chip_name;
+
+ dev->udev = udev;
+ mutex_init(&dev->ctrl_urb_lock);
+ spin_lock_init(&dev->slock);
+
+ dev->em28xx_write_regs = em28xx_write_regs;
+ dev->em28xx_read_reg = em28xx_read_reg;
+ dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
+ dev->em28xx_write_regs_req = em28xx_write_regs_req;
+ dev->em28xx_read_reg_req = em28xx_read_reg_req;
+ dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
+
+ em28xx_set_model(dev);
+
+ dev->wait_after_write = 5;
+
+ /* Based on the Chip ID, set the device configuration */
+ retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
+ if (retval > 0) {
+ dev->chip_id = retval;
+
+ switch (dev->chip_id) {
+ case CHIP_ID_EM2800:
+ chip_name = "em2800";
+ break;
+ case CHIP_ID_EM2710:
+ chip_name = "em2710";
+ break;
+ case CHIP_ID_EM2750:
+ chip_name = "em2750";
+ break;
+ case CHIP_ID_EM2765:
+ chip_name = "em2765";
+ dev->wait_after_write = 0;
+ dev->is_em25xx = 1;
+ dev->eeprom_addrwidth_16bit = 1;
+ break;
+ case CHIP_ID_EM2820:
+ chip_name = "em2710/2820";
+ if (le16_to_cpu(dev->udev->descriptor.idVendor)
+ == 0xeb1a) {
+ __le16 idProd = dev->udev->descriptor.idProduct;
+
+ if (le16_to_cpu(idProd) == 0x2710)
+ chip_name = "em2710";
+ else if (le16_to_cpu(idProd) == 0x2820)
+ chip_name = "em2820";
+ }
+ /* NOTE: the em2820 is used in webcams, too ! */
+ break;
+ case CHIP_ID_EM2840:
+ chip_name = "em2840";
+ break;
+ case CHIP_ID_EM2860:
+ chip_name = "em2860";
+ break;
+ case CHIP_ID_EM2870:
+ chip_name = "em2870";
+ dev->wait_after_write = 0;
+ break;
+ case CHIP_ID_EM2874:
+ chip_name = "em2874";
+ dev->wait_after_write = 0;
+ dev->eeprom_addrwidth_16bit = 1;
+ break;
+ case CHIP_ID_EM28174:
+ chip_name = "em28174";
+ dev->wait_after_write = 0;
+ dev->eeprom_addrwidth_16bit = 1;
+ break;
+ case CHIP_ID_EM28178:
+ chip_name = "em28178";
+ dev->wait_after_write = 0;
+ dev->eeprom_addrwidth_16bit = 1;
+ break;
+ case CHIP_ID_EM2883:
+ chip_name = "em2882/3";
+ dev->wait_after_write = 0;
+ break;
+ case CHIP_ID_EM2884:
+ chip_name = "em2884";
+ dev->wait_after_write = 0;
+ dev->eeprom_addrwidth_16bit = 1;
+ break;
+ default:
+ printk(KERN_INFO DRIVER_NAME
+ ": unknown em28xx chip ID (%d)\n", dev->chip_id);
+ }
+ }
+
+ if (chip_name != default_chip_name)
+ printk(KERN_INFO DRIVER_NAME
+ ": chip ID is %s\n", chip_name);
+
+ /*
+ * For em2820/em2710, the name may change latter, after checking
+ * if the device has a sensor (so, it is em2710) or not.
+ */
+ snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno);
+
+ if (dev->is_audio_only) {
+ retval = em28xx_audio_setup(dev);
+ if (retval)
+ return -ENODEV;
+ em28xx_init_extension(dev);
+
+ return 0;
+ }
+
+ em28xx_pre_card_setup(dev);
+
+ if (!dev->board.is_em2800) {
+ /* Resets I2C speed */
+ retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
+ if (retval < 0) {
+ em28xx_errdev("%s: em28xx_write_reg failed!"
+ " retval [%d]\n",
+ __func__, retval);
+ return retval;
+ }
+ }
+
+ rt_mutex_init(&dev->i2c_bus_lock);
+
+ /* register i2c bus 0 */
+ if (dev->board.is_em2800)
+ retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800);
+ else
+ retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX);
+ if (retval < 0) {
+ em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n",
+ __func__, retval);
+ return retval;
+ }
+
+ /* register i2c bus 1 */
+ if (dev->def_i2c_bus) {
+ if (dev->is_em25xx)
+ retval = em28xx_i2c_register(dev, 1,
+ EM28XX_I2C_ALGO_EM25XX_BUS_B);
+ else
+ retval = em28xx_i2c_register(dev, 1,
+ EM28XX_I2C_ALGO_EM28XX);
+ if (retval < 0) {
+ em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n",
+ __func__, retval);
+
+ em28xx_i2c_unregister(dev, 0);
+
+ return retval;
+ }
+ }
+
+ /* Do board specific init and eeprom reading */
+ em28xx_card_setup(dev);
+
+ return 0;
+}
+
+/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
+#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
+
+/*
+ * em28xx_usb_probe()
+ * checks for supported devices
+ */
+static int em28xx_usb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev;
+ struct em28xx *dev = NULL;
+ int retval;
+ bool has_vendor_audio = false, has_video = false, has_dvb = false;
+ int i, nr, try_bulk;
+ const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
+ char *speed;
+
+ udev = usb_get_dev(interface_to_usbdev(interface));
+
+ /* Check to see next free device and mark as used */
+ do {
+ nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS);
+ if (nr >= EM28XX_MAXBOARDS) {
+ /* No free device slots */
+ printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
+ EM28XX_MAXBOARDS);
+ retval = -ENOMEM;
+ goto err_no_slot;
+ }
+ } while (test_and_set_bit(nr, em28xx_devused));
+
+ /* Don't register audio interfaces */
+ if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
+ em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
+ "interface %i, class %i\n",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ ifnum,
+ interface->altsetting[0].desc.bInterfaceClass);
+
+ retval = -ENODEV;
+ goto err;
+ }
+
+ /* allocate memory for our device state and initialize it */
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ em28xx_err(DRIVER_NAME ": out of memory!\n");
+ retval = -ENOMEM;
+ goto err;
+ }
+
+ /* compute alternate max packet sizes */
+ dev->alt_max_pkt_size_isoc =
+ kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) *
+ interface->num_altsetting, GFP_KERNEL);
+ if (dev->alt_max_pkt_size_isoc == NULL) {
+ em28xx_errdev("out of memory!\n");
+ kfree(dev);
+ retval = -ENOMEM;
+ goto err;
+ }
+
+ /* Get endpoints */
+ for (i = 0; i < interface->num_altsetting; i++) {
+ int ep;
+
+ for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
+ const struct usb_endpoint_descriptor *e;
+ int sizedescr, size;
+
+ e = &interface->altsetting[i].endpoint[ep].desc;
+
+ sizedescr = le16_to_cpu(e->wMaxPacketSize);
+ size = sizedescr & 0x7ff;
+
+ if (udev->speed == USB_SPEED_HIGH)
+ size = size * hb_mult(sizedescr);
+
+ if (usb_endpoint_dir_in(e)) {
+ switch (e->bEndpointAddress) {
+ case 0x82:
+ has_video = true;
+ if (usb_endpoint_xfer_isoc(e)) {
+ dev->analog_ep_isoc =
+ e->bEndpointAddress;
+ dev->alt_max_pkt_size_isoc[i] = size;
+ } else if (usb_endpoint_xfer_bulk(e)) {
+ dev->analog_ep_bulk =
+ e->bEndpointAddress;
+ }
+ break;
+ case 0x83:
+ if (usb_endpoint_xfer_isoc(e)) {
+ has_vendor_audio = true;
+ } else {
+ printk(KERN_INFO DRIVER_NAME
+ ": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n");
+ }
+ break;
+ case 0x84:
+ if (has_video &&
+ (usb_endpoint_xfer_bulk(e))) {
+ dev->analog_ep_bulk =
+ e->bEndpointAddress;
+ } else {
+ if (usb_endpoint_xfer_isoc(e)) {
+ if (size > dev->dvb_max_pkt_size_isoc) {
+ has_dvb = true; /* see NOTE (~) */
+ dev->dvb_ep_isoc = e->bEndpointAddress;
+ dev->dvb_max_pkt_size_isoc = size;
+ dev->dvb_alt_isoc = i;
+ }
+ } else {
+ has_dvb = true;
+ dev->dvb_ep_bulk = e->bEndpointAddress;
+ }
+ }
+ break;
+ }
+ }
+ /* NOTE:
+ * Old logic with support for isoc transfers only was:
+ * 0x82 isoc => analog
+ * 0x83 isoc => audio
+ * 0x84 isoc => digital
+ *
+ * New logic with support for bulk transfers
+ * 0x82 isoc => analog
+ * 0x82 bulk => analog
+ * 0x83 isoc* => audio
+ * 0x84 isoc => digital
+ * 0x84 bulk => analog or digital**
+ * (*: audio should always be isoc)
+ * (**: analog, if ep 0x82 is isoc, otherwise digital)
+ *
+ * The new logic preserves backwards compatibility and
+ * reflects the endpoint configurations we have seen
+ * so far. But there might be devices for which this
+ * logic is not sufficient...
+ */
+ /*
+ * NOTE (~): some manufacturers (e.g. Terratec) disable
+ * endpoints by setting wMaxPacketSize to 0 bytes for
+ * all alt settings. So far, we've seen this for
+ * DVB isoc endpoints only.
+ */
+ }
+ }
+
+ if (!(has_vendor_audio || has_video || has_dvb)) {
+ retval = -ENODEV;
+ goto err_free;
+ }
+
+ switch (udev->speed) {
+ case USB_SPEED_LOW:
+ speed = "1.5";
+ break;
+ case USB_SPEED_UNKNOWN:
+ case USB_SPEED_FULL:
+ speed = "12";
+ break;
+ case USB_SPEED_HIGH:
+ speed = "480";
+ break;
+ default:
+ speed = "unknown";
+ }
+
+ printk(KERN_INFO DRIVER_NAME
+ ": New device %s %s @ %s Mbps "
+ "(%04x:%04x, interface %d, class %d)\n",
+ udev->manufacturer ? udev->manufacturer : "",
+ udev->product ? udev->product : "",
+ speed,
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ ifnum,
+ interface->altsetting->desc.bInterfaceNumber);
+
+ /*
+ * Make sure we have 480 Mbps of bandwidth, otherwise things like
+ * video stream wouldn't likely work, since 12 Mbps is generally
+ * not enough even for most Digital TV streams.
+ */
+ if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
+ printk(DRIVER_NAME ": Device initialization failed.\n");
+ printk(DRIVER_NAME ": Device must be connected to a high-speed"
+ " USB 2.0 port.\n");
+ retval = -ENODEV;
+ goto err_free;
+ }
+
+ dev->devno = nr;
+ dev->model = id->driver_info;
+ dev->alt = -1;
+ dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb);
+ dev->has_video = has_video;
+ dev->ifnum = ifnum;
+
+ if (has_vendor_audio) {
+ printk(KERN_INFO DRIVER_NAME ": Audio interface %i found %s\n",
+ ifnum, "(Vendor Class)");
+ dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR;
+ }
+ /* Checks if audio is provided by a USB Audio Class interface */
+ for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
+ struct usb_interface *uif = udev->config->interface[i];
+
+ if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
+ if (has_vendor_audio)
+ em28xx_err("em28xx: device seems to have vendor AND usb audio class interfaces !\n"
+ "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n");
+ dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS;
+ break;
+ }
+ }
+
+ if (has_video)
+ printk(KERN_INFO DRIVER_NAME
+ ": Video interface %i found:%s%s\n",
+ ifnum,
+ dev->analog_ep_bulk ? " bulk" : "",
+ dev->analog_ep_isoc ? " isoc" : "");
+ if (has_dvb)
+ printk(KERN_INFO DRIVER_NAME
+ ": DVB interface %i found:%s%s\n",
+ ifnum,
+ dev->dvb_ep_bulk ? " bulk" : "",
+ dev->dvb_ep_isoc ? " isoc" : "");
+
+ dev->num_alt = interface->num_altsetting;
+
+ if ((unsigned)card[nr] < em28xx_bcount)
+ dev->model = card[nr];
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(interface, dev);
+
+ /* allocate device struct */
+ mutex_init(&dev->lock);
+ retval = em28xx_init_dev(dev, udev, interface, nr);
+ if (retval) {
+ goto err_free;
+ }
+
+ if (usb_xfer_mode < 0) {
+ if (dev->board.is_webcam)
+ try_bulk = 1;
+ else
+ try_bulk = 0;
+ } else {
+ try_bulk = usb_xfer_mode > 0;
+ }
+
+ /* Select USB transfer types to use */
+ if (has_video) {
+ if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk))
+ dev->analog_xfer_bulk = 1;
+ em28xx_info("analog set to %s mode.\n",
+ dev->analog_xfer_bulk ? "bulk" : "isoc");
+ }
+ if (has_dvb) {
+ if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk))
+ dev->dvb_xfer_bulk = 1;
+ em28xx_info("dvb set to %s mode.\n",
+ dev->dvb_xfer_bulk ? "bulk" : "isoc");
+ }
+
+ kref_init(&dev->ref);
+
+ request_modules(dev);
+
+ /* Should be the last thing to do, to avoid newer udev's to
+ open the device before fully initializing it
+ */
+
+ return 0;
+
+err_free:
+ kfree(dev->alt_max_pkt_size_isoc);
+ kfree(dev);
+
+err:
+ clear_bit(nr, em28xx_devused);
+
+err_no_slot:
+ usb_put_dev(udev);
+ return retval;
+}
+
+/*
+ * em28xx_usb_disconnect()
+ * called when the device gets disconnected
+ * video device will be unregistered on v4l2_close in case it is still open
+ */
+static void em28xx_usb_disconnect(struct usb_interface *interface)
+{
+ struct em28xx *dev;
+
+ dev = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ if (!dev)
+ return;
+
+ dev->disconnected = 1;
+
+ em28xx_info("Disconnecting %s\n", dev->name);
+
+ flush_request_modules(dev);
+
+ em28xx_close_extension(dev);
+
+ em28xx_release_resources(dev);
+ kref_put(&dev->ref, em28xx_free_device);
+}
+
+static int em28xx_usb_suspend(struct usb_interface *interface,
+ pm_message_t message)
+{
+ struct em28xx *dev;
+
+ dev = usb_get_intfdata(interface);
+ if (!dev)
+ return 0;
+ em28xx_suspend_extension(dev);
+ return 0;
+}
+
+static int em28xx_usb_resume(struct usb_interface *interface)
+{
+ struct em28xx *dev;
+
+ dev = usb_get_intfdata(interface);
+ if (!dev)
+ return 0;
+ em28xx_resume_extension(dev);
+ return 0;
+}
+
+static struct usb_driver em28xx_usb_driver = {
+ .name = "em28xx",
+ .probe = em28xx_usb_probe,
+ .disconnect = em28xx_usb_disconnect,
+ .suspend = em28xx_usb_suspend,
+ .resume = em28xx_usb_resume,
+ .reset_resume = em28xx_usb_resume,
+ .id_table = em28xx_id_table,
+};
+
+module_usb_driver(em28xx_usb_driver);
Code Review / kvmfornfv.git / blobdiff