Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / usb / dvb-usb / opera1.c
diff --git a/kernel/drivers/media/usb/dvb-usb/opera1.c b/kernel/drivers/media/usb/dvb-usb/opera1.c
new file mode 100644 (file)
index 0000000..14a2119
--- /dev/null
@@ -0,0 +1,583 @@
+/* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card
+*
+* Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org)
+* Copyright (C) 2006 Marco Gittler (g.marco@freenet.de)
+*
+*      This program is free software; you can redistribute it and/or modify it
+*      under the terms of the GNU General Public License as published by the Free
+*      Software Foundation, version 2.
+*
+* see Documentation/dvb/README.dvb-usb for more information
+*/
+
+#define DVB_USB_LOG_PREFIX "opera"
+
+#include "dvb-usb.h"
+#include "stv0299.h"
+
+#define OPERA_READ_MSG 0
+#define OPERA_WRITE_MSG 1
+#define OPERA_I2C_TUNER 0xd1
+
+#define READ_FX2_REG_REQ  0xba
+#define READ_MAC_ADDR 0x08
+#define OPERA_WRITE_FX2 0xbb
+#define OPERA_TUNER_REQ 0xb1
+#define REG_1F_SYMBOLRATE_BYTE0 0x1f
+#define REG_20_SYMBOLRATE_BYTE1 0x20
+#define REG_21_SYMBOLRATE_BYTE2 0x21
+
+#define ADDR_B600_VOLTAGE_13V (0x02)
+#define ADDR_B601_VOLTAGE_18V (0x03)
+#define ADDR_B1A6_STREAM_CTRL (0x04)
+#define ADDR_B880_READ_REMOTE (0x05)
+
+struct opera1_state {
+       u32 last_key_pressed;
+};
+struct rc_map_opera_table {
+       u32 keycode;
+       u32 event;
+};
+
+static int dvb_usb_opera1_debug;
+module_param_named(debug, dvb_usb_opera1_debug, int, 0644);
+MODULE_PARM_DESC(debug,
+                "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))."
+                DVB_USB_DEBUG_STATUS);
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+
+static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value,
+                           u8 * data, u16 len, int flags)
+{
+       int ret;
+       u8 tmp;
+       u8 *buf;
+       unsigned int pipe = (flags == OPERA_READ_MSG) ?
+               usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0);
+       u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
+
+       buf = kmalloc(len, GFP_KERNEL);
+       if (!buf)
+               return -ENOMEM;
+
+       if (flags == OPERA_WRITE_MSG)
+               memcpy(buf, data, len);
+       ret = usb_control_msg(dev, pipe, request,
+                       request_type | USB_TYPE_VENDOR, value, 0x0,
+                       buf, len, 2000);
+
+       if (request == OPERA_TUNER_REQ) {
+               tmp = buf[0];
+               if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+                           OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR,
+                           0x01, 0x0, buf, 1, 2000) < 1 || buf[0] != 0x08) {
+                       ret = 0;
+                       goto out;
+               }
+               buf[0] = tmp;
+       }
+       if (flags == OPERA_READ_MSG)
+               memcpy(data, buf, len);
+out:
+       kfree(buf);
+       return ret;
+}
+
+/* I2C */
+
+static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr,
+                                 u8 * buf, u16 len)
+{
+       int ret = 0;
+       u8 request;
+       u16 value;
+
+       if (!dev) {
+               info("no usb_device");
+               return -EINVAL;
+       }
+       if (mutex_lock_interruptible(&dev->usb_mutex) < 0)
+               return -EAGAIN;
+
+       switch (addr>>1){
+               case ADDR_B600_VOLTAGE_13V:
+                       request=0xb6;
+                       value=0x00;
+                       break;
+               case ADDR_B601_VOLTAGE_18V:
+                       request=0xb6;
+                       value=0x01;
+                       break;
+               case ADDR_B1A6_STREAM_CTRL:
+                       request=0xb1;
+                       value=0xa6;
+                       break;
+               case ADDR_B880_READ_REMOTE:
+                       request=0xb8;
+                       value=0x80;
+                       break;
+               default:
+                       request=0xb1;
+                       value=addr;
+       }
+       ret = opera1_xilinx_rw(dev->udev, request,
+               value, buf, len,
+               addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG);
+
+       mutex_unlock(&dev->usb_mutex);
+       return ret;
+}
+
+static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+                          int num)
+{
+       struct dvb_usb_device *d = i2c_get_adapdata(adap);
+       int i = 0, tmp = 0;
+
+       if (!d)
+               return -ENODEV;
+       if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+               return -EAGAIN;
+
+       for (i = 0; i < num; i++) {
+               if ((tmp = opera1_usb_i2c_msgxfer(d,
+                                       (msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0),
+                                       msg[i].buf,
+                                       msg[i].len
+                                       )) != msg[i].len) {
+                       break;
+               }
+               if (dvb_usb_opera1_debug & 0x10)
+                       info("sending i2c message %d %d", tmp, msg[i].len);
+       }
+       mutex_unlock(&d->i2c_mutex);
+       return num;
+}
+
+static u32 opera1_i2c_func(struct i2c_adapter *adapter)
+{
+       return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm opera1_i2c_algo = {
+       .master_xfer = opera1_i2c_xfer,
+       .functionality = opera1_i2c_func,
+};
+
+static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+       static u8 command_13v[1]={0x00};
+       static u8 command_18v[1]={0x01};
+       struct i2c_msg msg[] = {
+               {.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1},
+       };
+       struct dvb_usb_adapter *udev_adap =
+           (struct dvb_usb_adapter *)(fe->dvb->priv);
+       if (voltage == SEC_VOLTAGE_18) {
+               msg[0].addr = ADDR_B601_VOLTAGE_18V;
+               msg[0].buf = command_18v;
+       }
+       i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
+       return 0;
+}
+
+static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate,
+                                         u32 ratio)
+{
+       stv0299_writereg(fe, 0x13, 0x98);
+       stv0299_writereg(fe, 0x14, 0x95);
+       stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff);
+       stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff);
+       stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0);
+       return 0;
+
+}
+static u8 opera1_inittab[] = {
+       0x00, 0xa1,
+       0x01, 0x15,
+       0x02, 0x30,
+       0x03, 0x00,
+       0x04, 0x7d,
+       0x05, 0x05,
+       0x06, 0x02,
+       0x07, 0x00,
+       0x0b, 0x00,
+       0x0c, 0x01,
+       0x0d, 0x81,
+       0x0e, 0x44,
+       0x0f, 0x19,
+       0x10, 0x3f,
+       0x11, 0x84,
+       0x12, 0xda,
+       0x13, 0x98,
+       0x14, 0x95,
+       0x15, 0xc9,
+       0x16, 0xeb,
+       0x17, 0x00,
+       0x18, 0x19,
+       0x19, 0x8b,
+       0x1a, 0x00,
+       0x1b, 0x82,
+       0x1c, 0x7f,
+       0x1d, 0x00,
+       0x1e, 0x00,
+       REG_1F_SYMBOLRATE_BYTE0, 0x06,
+       REG_20_SYMBOLRATE_BYTE1, 0x50,
+       REG_21_SYMBOLRATE_BYTE2, 0x10,
+       0x22, 0x00,
+       0x23, 0x00,
+       0x24, 0x37,
+       0x25, 0xbc,
+       0x26, 0x00,
+       0x27, 0x00,
+       0x28, 0x00,
+       0x29, 0x1e,
+       0x2a, 0x14,
+       0x2b, 0x1f,
+       0x2c, 0x09,
+       0x2d, 0x0a,
+       0x2e, 0x00,
+       0x2f, 0x00,
+       0x30, 0x00,
+       0x31, 0x1f,
+       0x32, 0x19,
+       0x33, 0xfc,
+       0x34, 0x13,
+       0xff, 0xff,
+};
+
+static struct stv0299_config opera1_stv0299_config = {
+       .demod_address = 0xd0>>1,
+       .min_delay_ms = 100,
+       .mclk = 88000000UL,
+       .invert = 1,
+       .skip_reinit = 0,
+       .lock_output = STV0299_LOCKOUTPUT_0,
+       .volt13_op0_op1 = STV0299_VOLT13_OP0,
+       .inittab = opera1_inittab,
+       .set_symbol_rate = opera1_stv0299_set_symbol_rate,
+};
+
+static int opera1_frontend_attach(struct dvb_usb_adapter *d)
+{
+       d->fe_adap[0].fe = dvb_attach(stv0299_attach, &opera1_stv0299_config,
+                                     &d->dev->i2c_adap);
+       if ((d->fe_adap[0].fe) != NULL) {
+               d->fe_adap[0].fe->ops.set_voltage = opera1_set_voltage;
+               return 0;
+       }
+       info("not attached stv0299");
+       return -EIO;
+}
+
+static int opera1_tuner_attach(struct dvb_usb_adapter *adap)
+{
+       dvb_attach(
+               dvb_pll_attach, adap->fe_adap[0].fe, 0xc0>>1,
+               &adap->dev->i2c_adap, DVB_PLL_OPERA1
+       );
+       return 0;
+}
+
+static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+       u8 val = onoff ? 0x01 : 0x00;
+
+       if (dvb_usb_opera1_debug)
+               info("power %s", onoff ? "on" : "off");
+       return opera1_xilinx_rw(d->udev, 0xb7, val,
+                               &val, 1, OPERA_WRITE_MSG);
+}
+
+static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+       static u8 buf_start[2] = { 0xff, 0x03 };
+       static u8 buf_stop[2] = { 0xff, 0x00 };
+       struct i2c_msg start_tuner[] = {
+               {.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2},
+       };
+       if (dvb_usb_opera1_debug)
+               info("streaming %s", onoff ? "on" : "off");
+       i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1);
+       return 0;
+}
+
+static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
+                            int onoff)
+{
+       u8 b_pid[3];
+       struct i2c_msg msg[] = {
+               {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
+       };
+       if (dvb_usb_opera1_debug)
+               info("pidfilter index: %d pid: %d %s", index, pid,
+                       onoff ? "on" : "off");
+       b_pid[0] = (2 * index) + 4;
+       b_pid[1] = onoff ? (pid & 0xff) : (0x00);
+       b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00);
+       i2c_transfer(&adap->dev->i2c_adap, msg, 1);
+       return 0;
+}
+
+static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff)
+{
+       int u = 0x04;
+       u8 b_pid[3];
+       struct i2c_msg msg[] = {
+               {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
+       };
+       if (dvb_usb_opera1_debug)
+               info("%s hw-pidfilter", onoff ? "enable" : "disable");
+       for (; u < 0x7e; u += 2) {
+               b_pid[0] = u;
+               b_pid[1] = 0;
+               b_pid[2] = 0x80;
+               i2c_transfer(&adap->dev->i2c_adap, msg, 1);
+       }
+       return 0;
+}
+
+static struct rc_map_table rc_map_opera1_table[] = {
+       {0x5fa0, KEY_1},
+       {0x51af, KEY_2},
+       {0x5da2, KEY_3},
+       {0x41be, KEY_4},
+       {0x0bf5, KEY_5},
+       {0x43bd, KEY_6},
+       {0x47b8, KEY_7},
+       {0x49b6, KEY_8},
+       {0x05fa, KEY_9},
+       {0x45ba, KEY_0},
+       {0x09f6, KEY_CHANNELUP},        /*chanup */
+       {0x1be5, KEY_CHANNELDOWN},      /*chandown */
+       {0x5da3, KEY_VOLUMEDOWN},       /*voldown */
+       {0x5fa1, KEY_VOLUMEUP},         /*volup */
+       {0x07f8, KEY_SPACE},            /*tab */
+       {0x1fe1, KEY_OK},               /*play ok */
+       {0x1be4, KEY_ZOOM},             /*zoom */
+       {0x59a6, KEY_MUTE},             /*mute */
+       {0x5ba5, KEY_RADIO},            /*tv/f */
+       {0x19e7, KEY_RECORD},           /*rec */
+       {0x01fe, KEY_STOP},             /*Stop */
+       {0x03fd, KEY_PAUSE},            /*pause */
+       {0x03fc, KEY_SCREEN},           /*<- -> */
+       {0x07f9, KEY_CAMERA},           /*capture */
+       {0x47b9, KEY_ESC},              /*exit */
+       {0x43bc, KEY_POWER2},           /*power */
+};
+
+static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state)
+{
+       struct opera1_state *opst = dev->priv;
+       u8 rcbuffer[32];
+       const u16 startmarker1 = 0x10ed;
+       const u16 startmarker2 = 0x11ec;
+       struct i2c_msg read_remote[] = {
+               {.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32},
+       };
+       int i = 0;
+       u32 send_key = 0;
+
+       if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) {
+               for (i = 0; i < 32; i++) {
+                       if (rcbuffer[i])
+                               send_key |= 1;
+                       if (i < 31)
+                               send_key = send_key << 1;
+               }
+               if (send_key & 0x8000)
+                       send_key = (send_key << 1) | (send_key >> 15 & 0x01);
+
+               if (send_key == 0xffff && opst->last_key_pressed != 0) {
+                       *state = REMOTE_KEY_REPEAT;
+                       *event = opst->last_key_pressed;
+                       return 0;
+               }
+               for (; send_key != 0;) {
+                       if (send_key >> 16 == startmarker2) {
+                               break;
+                       } else if (send_key >> 16 == startmarker1) {
+                               send_key =
+                                       (send_key & 0xfffeffff) | (startmarker1 << 16);
+                               break;
+                       } else
+                               send_key >>= 1;
+               }
+
+               if (send_key == 0)
+                       return 0;
+
+               send_key = (send_key & 0xffff) | 0x0100;
+
+               for (i = 0; i < ARRAY_SIZE(rc_map_opera1_table); i++) {
+                       if (rc5_scan(&rc_map_opera1_table[i]) == (send_key & 0xffff)) {
+                               *state = REMOTE_KEY_PRESSED;
+                               *event = rc_map_opera1_table[i].keycode;
+                               opst->last_key_pressed =
+                                       rc_map_opera1_table[i].keycode;
+                               break;
+                       }
+                       opst->last_key_pressed = 0;
+               }
+       } else
+               *state = REMOTE_NO_KEY_PRESSED;
+       return 0;
+}
+
+static struct usb_device_id opera1_table[] = {
+       {USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD)},
+       {USB_DEVICE(USB_VID_OPERA1, USB_PID_OPERA1_WARM)},
+       {}
+};
+
+MODULE_DEVICE_TABLE(usb, opera1_table);
+
+static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
+{
+       u8 command[] = { READ_MAC_ADDR };
+       opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG);
+       opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG);
+       return 0;
+}
+static int opera1_xilinx_load_firmware(struct usb_device *dev,
+                                      const char *filename)
+{
+       const struct firmware *fw = NULL;
+       u8 *b, *p;
+       int ret = 0, i,fpgasize=40;
+       u8 testval;
+       info("start downloading fpga firmware %s",filename);
+
+       if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) {
+               err("did not find the firmware file. (%s) "
+                       "Please see linux/Documentation/dvb/ for more details on firmware-problems.",
+                       filename);
+               return ret;
+       } else {
+               p = kmalloc(fw->size, GFP_KERNEL);
+               opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG);
+               if (p != NULL && testval != 0x67) {
+
+                       u8 reset = 0, fpga_command = 0;
+                       memcpy(p, fw->data, fw->size);
+                       /* clear fpga ? */
+                       opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1,
+                                        OPERA_WRITE_MSG);
+                       for (i = 0; i < fw->size;) {
+                               if ( (fw->size - i) <fpgasize){
+                                   fpgasize=fw->size-i;
+                               }
+                               b = (u8 *) p + i;
+                               if (opera1_xilinx_rw
+                                       (dev, OPERA_WRITE_FX2, 0x0, b , fpgasize,
+                                               OPERA_WRITE_MSG) != fpgasize
+                                       ) {
+                                       err("error while transferring firmware");
+                                       ret = -EINVAL;
+                                       break;
+                               }
+                               i = i + fpgasize;
+                       }
+                       /* restart the CPU */
+                       if (ret || opera1_xilinx_rw
+                                       (dev, 0xa0, 0xe600, &reset, 1,
+                                       OPERA_WRITE_MSG) != 1) {
+                               err("could not restart the USB controller CPU.");
+                               ret = -EINVAL;
+                       }
+               }
+       }
+       kfree(p);
+       release_firmware(fw);
+       return ret;
+}
+
+static struct dvb_usb_device_properties opera1_properties = {
+       .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+       .usb_ctrl = CYPRESS_FX2,
+       .firmware = "dvb-usb-opera-01.fw",
+       .size_of_priv = sizeof(struct opera1_state),
+
+       .power_ctrl = opera1_power_ctrl,
+       .i2c_algo = &opera1_i2c_algo,
+
+       .rc.legacy = {
+               .rc_map_table = rc_map_opera1_table,
+               .rc_map_size = ARRAY_SIZE(rc_map_opera1_table),
+               .rc_interval = 200,
+               .rc_query = opera1_rc_query,
+       },
+       .read_mac_address = opera1_read_mac_address,
+       .generic_bulk_ctrl_endpoint = 0x00,
+       /* parameter for the MPEG2-data transfer */
+       .num_adapters = 1,
+       .adapter = {
+               {
+               .num_frontends = 1,
+               .fe = {{
+                       .frontend_attach = opera1_frontend_attach,
+                       .streaming_ctrl = opera1_streaming_ctrl,
+                       .tuner_attach = opera1_tuner_attach,
+                       .caps =
+                               DVB_USB_ADAP_HAS_PID_FILTER |
+                               DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+                       .pid_filter = opera1_pid_filter,
+                       .pid_filter_ctrl = opera1_pid_filter_control,
+                       .pid_filter_count = 252,
+                       .stream = {
+                               .type = USB_BULK,
+                               .count = 10,
+                               .endpoint = 0x82,
+                               .u = {
+                                       .bulk = {
+                                               .buffersize = 4096,
+                                       }
+                               }
+                       },
+               }},
+               }
+       },
+       .num_device_descs = 1,
+       .devices = {
+               {"Opera1 DVB-S USB2.0",
+                       {&opera1_table[0], NULL},
+                       {&opera1_table[1], NULL},
+               },
+       }
+};
+
+static int opera1_probe(struct usb_interface *intf,
+                       const struct usb_device_id *id)
+{
+       struct usb_device *udev = interface_to_usbdev(intf);
+
+       if (le16_to_cpu(udev->descriptor.idProduct) == USB_PID_OPERA1_WARM &&
+           le16_to_cpu(udev->descriptor.idVendor) == USB_VID_OPERA1 &&
+               opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0
+           ) {
+               return -EINVAL;
+       }
+
+       if (0 != dvb_usb_device_init(intf, &opera1_properties,
+                                    THIS_MODULE, NULL, adapter_nr))
+               return -EINVAL;
+       return 0;
+}
+
+static struct usb_driver opera1_driver = {
+       .name = "opera1",
+       .probe = opera1_probe,
+       .disconnect = dvb_usb_device_exit,
+       .id_table = opera1_table,
+};
+
+module_usb_driver(opera1_driver);
+
+MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org");
+MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de");
+MODULE_DESCRIPTION("Driver for Opera1 DVB-S device");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");