Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / usb / dvb-usb / dvb-usb-init.c
diff --git a/kernel/drivers/media/usb/dvb-usb/dvb-usb-init.c b/kernel/drivers/media/usb/dvb-usb/dvb-usb-init.c
new file mode 100644 (file)
index 0000000..1adf325
--- /dev/null
@@ -0,0 +1,304 @@
+/*
+ * DVB USB library - provides a generic interface for a DVB USB device driver.
+ *
+ * dvb-usb-init.c
+ *
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ *     This program is free software; you can redistribute it and/or modify it
+ *     under the terms of the GNU General Public License as published by the Free
+ *     Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include "dvb-usb-common.h"
+
+/* debug */
+int dvb_usb_debug;
+module_param_named(debug, dvb_usb_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64,mem=128,uxfer=256  (or-able))." DVB_USB_DEBUG_STATUS);
+
+int dvb_usb_disable_rc_polling;
+module_param_named(disable_rc_polling, dvb_usb_disable_rc_polling, int, 0644);
+MODULE_PARM_DESC(disable_rc_polling, "disable remote control polling (default: 0).");
+
+static int dvb_usb_force_pid_filter_usage;
+module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444);
+MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0).");
+
+static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
+{
+       struct dvb_usb_adapter *adap;
+       int ret, n, o;
+
+       for (n = 0; n < d->props.num_adapters; n++) {
+               adap = &d->adapter[n];
+               adap->dev = d;
+               adap->id  = n;
+
+               memcpy(&adap->props, &d->props.adapter[n], sizeof(struct dvb_usb_adapter_properties));
+
+               for (o = 0; o < adap->props.num_frontends; o++) {
+                       struct dvb_usb_adapter_fe_properties *props = &adap->props.fe[o];
+                       /* speed - when running at FULL speed we need a HW PID filter */
+                       if (d->udev->speed == USB_SPEED_FULL && !(props->caps & DVB_USB_ADAP_HAS_PID_FILTER)) {
+                               err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)");
+                               return -ENODEV;
+                       }
+
+                       if ((d->udev->speed == USB_SPEED_FULL && props->caps & DVB_USB_ADAP_HAS_PID_FILTER) ||
+                               (props->caps & DVB_USB_ADAP_NEED_PID_FILTERING)) {
+                               info("will use the device's hardware PID filter (table count: %d).", props->pid_filter_count);
+                               adap->fe_adap[o].pid_filtering  = 1;
+                               adap->fe_adap[o].max_feed_count = props->pid_filter_count;
+                       } else {
+                               info("will pass the complete MPEG2 transport stream to the software demuxer.");
+                               adap->fe_adap[o].pid_filtering  = 0;
+                               adap->fe_adap[o].max_feed_count = 255;
+                       }
+
+                       if (!adap->fe_adap[o].pid_filtering &&
+                               dvb_usb_force_pid_filter_usage &&
+                               props->caps & DVB_USB_ADAP_HAS_PID_FILTER) {
+                               info("pid filter enabled by module option.");
+                               adap->fe_adap[o].pid_filtering  = 1;
+                               adap->fe_adap[o].max_feed_count = props->pid_filter_count;
+                       }
+
+                       if (props->size_of_priv > 0) {
+                               adap->fe_adap[o].priv = kzalloc(props->size_of_priv, GFP_KERNEL);
+                               if (adap->fe_adap[o].priv == NULL) {
+                                       err("no memory for priv for adapter %d fe %d.", n, o);
+                                       return -ENOMEM;
+                               }
+                       }
+               }
+
+               if (adap->props.size_of_priv > 0) {
+                       adap->priv = kzalloc(adap->props.size_of_priv, GFP_KERNEL);
+                       if (adap->priv == NULL) {
+                               err("no memory for priv for adapter %d.", n);
+                               return -ENOMEM;
+                       }
+               }
+
+               if ((ret = dvb_usb_adapter_stream_init(adap)) ||
+                       (ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
+                       (ret = dvb_usb_adapter_frontend_init(adap))) {
+                       return ret;
+               }
+
+               /* use exclusive FE lock if there is multiple shared FEs */
+               if (adap->fe_adap[1].fe)
+                       adap->dvb_adap.mfe_shared = 1;
+
+               d->num_adapters_initialized++;
+               d->state |= DVB_USB_STATE_DVB;
+       }
+
+       /*
+        * when reloading the driver w/o replugging the device
+        * sometimes a timeout occures, this helps
+        */
+       if (d->props.generic_bulk_ctrl_endpoint != 0) {
+               usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
+               usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
+       }
+
+       return 0;
+}
+
+static int dvb_usb_adapter_exit(struct dvb_usb_device *d)
+{
+       int n;
+
+       for (n = 0; n < d->num_adapters_initialized; n++) {
+               dvb_usb_adapter_frontend_exit(&d->adapter[n]);
+               dvb_usb_adapter_dvb_exit(&d->adapter[n]);
+               dvb_usb_adapter_stream_exit(&d->adapter[n]);
+               kfree(d->adapter[n].priv);
+       }
+       d->num_adapters_initialized = 0;
+       d->state &= ~DVB_USB_STATE_DVB;
+       return 0;
+}
+
+
+/* general initialization functions */
+static int dvb_usb_exit(struct dvb_usb_device *d)
+{
+       deb_info("state before exiting everything: %x\n", d->state);
+       dvb_usb_remote_exit(d);
+       dvb_usb_adapter_exit(d);
+       dvb_usb_i2c_exit(d);
+       deb_info("state should be zero now: %x\n", d->state);
+       d->state = DVB_USB_STATE_INIT;
+       kfree(d->priv);
+       kfree(d);
+       return 0;
+}
+
+static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums)
+{
+       int ret = 0;
+
+       mutex_init(&d->usb_mutex);
+       mutex_init(&d->i2c_mutex);
+
+       d->state = DVB_USB_STATE_INIT;
+
+       if (d->props.size_of_priv > 0) {
+               d->priv = kzalloc(d->props.size_of_priv, GFP_KERNEL);
+               if (d->priv == NULL) {
+                       err("no memory for priv in 'struct dvb_usb_device'");
+                       return -ENOMEM;
+               }
+       }
+
+       /* check the capabilities and set appropriate variables */
+       dvb_usb_device_power_ctrl(d, 1);
+
+       if ((ret = dvb_usb_i2c_init(d)) ||
+               (ret = dvb_usb_adapter_init(d, adapter_nums))) {
+               dvb_usb_exit(d);
+               return ret;
+       }
+
+       if ((ret = dvb_usb_remote_init(d)))
+               err("could not initialize remote control.");
+
+       dvb_usb_device_power_ctrl(d, 0);
+
+       return 0;
+}
+
+/* determine the name and the state of the just found USB device */
+static struct dvb_usb_device_description *dvb_usb_find_device(struct usb_device *udev, struct dvb_usb_device_properties *props, int *cold)
+{
+       int i, j;
+       struct dvb_usb_device_description *desc = NULL;
+
+       *cold = -1;
+
+       for (i = 0; i < props->num_device_descs; i++) {
+
+               for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].cold_ids[j] != NULL; j++) {
+                       deb_info("check for cold %x %x\n", props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct);
+                       if (props->devices[i].cold_ids[j]->idVendor  == le16_to_cpu(udev->descriptor.idVendor) &&
+                               props->devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
+                               *cold = 1;
+                               desc = &props->devices[i];
+                               break;
+                       }
+               }
+
+               if (desc != NULL)
+                       break;
+
+               for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].warm_ids[j] != NULL; j++) {
+                       deb_info("check for warm %x %x\n", props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct);
+                       if (props->devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) &&
+                               props->devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
+                               *cold = 0;
+                               desc = &props->devices[i];
+                               break;
+                       }
+               }
+       }
+
+       if (desc != NULL && props->identify_state != NULL)
+               props->identify_state(udev, props, &desc, cold);
+
+       return desc;
+}
+
+int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+       if (onoff)
+               d->powered++;
+       else
+               d->powered--;
+
+       if (d->powered == 0 || (onoff && d->powered == 1)) { /* when switching from 1 to 0 or from 0 to 1 */
+               deb_info("power control: %d\n", onoff);
+               if (d->props.power_ctrl)
+                       return d->props.power_ctrl(d, onoff);
+       }
+       return 0;
+}
+
+/*
+ * USB
+ */
+int dvb_usb_device_init(struct usb_interface *intf,
+                       struct dvb_usb_device_properties *props,
+                       struct module *owner, struct dvb_usb_device **du,
+                       short *adapter_nums)
+{
+       struct usb_device *udev = interface_to_usbdev(intf);
+       struct dvb_usb_device *d = NULL;
+       struct dvb_usb_device_description *desc = NULL;
+
+       int ret = -ENOMEM, cold = 0;
+
+       if (du != NULL)
+               *du = NULL;
+
+       if ((desc = dvb_usb_find_device(udev, props, &cold)) == NULL) {
+               deb_err("something went very wrong, device was not found in current device list - let's see what comes next.\n");
+               return -ENODEV;
+       }
+
+       if (cold) {
+               info("found a '%s' in cold state, will try to load a firmware", desc->name);
+               ret = dvb_usb_download_firmware(udev, props);
+               if (!props->no_reconnect || ret != 0)
+                       return ret;
+       }
+
+       info("found a '%s' in warm state.", desc->name);
+       d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL);
+       if (d == NULL) {
+               err("no memory for 'struct dvb_usb_device'");
+               return -ENOMEM;
+       }
+
+       d->udev = udev;
+       memcpy(&d->props, props, sizeof(struct dvb_usb_device_properties));
+       d->desc = desc;
+       d->owner = owner;
+
+       usb_set_intfdata(intf, d);
+
+       if (du != NULL)
+               *du = d;
+
+       ret = dvb_usb_init(d, adapter_nums);
+
+       if (ret == 0)
+               info("%s successfully initialized and connected.", desc->name);
+       else
+               info("%s error while loading driver (%d)", desc->name, ret);
+       return ret;
+}
+EXPORT_SYMBOL(dvb_usb_device_init);
+
+void dvb_usb_device_exit(struct usb_interface *intf)
+{
+       struct dvb_usb_device *d = usb_get_intfdata(intf);
+       const char *name = "generic DVB-USB module";
+
+       usb_set_intfdata(intf, NULL);
+       if (d != NULL && d->desc != NULL) {
+               name = d->desc->name;
+               dvb_usb_exit(d);
+       }
+       info("%s successfully deinitialized and disconnected.", name);
+
+}
+EXPORT_SYMBOL(dvb_usb_device_exit);
+
+MODULE_VERSION("1.0");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices");
+MODULE_LICENSE("GPL");