--- /dev/null
+/*
+ * Afatech AF9035 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef AF9035_H
+#define AF9035_H
+
+#include "dvb_usb.h"
+#include "af9033.h"
+#include "tua9001.h"
+#include "fc0011.h"
+#include "fc0012.h"
+#include "mxl5007t.h"
+#include "tda18218.h"
+#include "fc2580.h"
+#include "it913x.h"
+#include "si2168.h"
+#include "si2157.h"
+
+struct reg_val {
+ u32 reg;
+ u8 val;
+};
+
+struct reg_val_mask {
+ u32 reg;
+ u8 val;
+ u8 mask;
+};
+
+struct usb_req {
+ u8 cmd;
+ u8 mbox;
+ u8 wlen;
+ u8 *wbuf;
+ u8 rlen;
+ u8 *rbuf;
+};
+
+struct state {
+#define BUF_LEN 64
+ u8 buf[BUF_LEN];
+ u8 seq; /* packet sequence number */
+ u8 prechip_version;
+ u8 chip_version;
+ u16 chip_type;
+ u8 dual_mode:1;
+ u16 eeprom_addr;
+ u8 af9033_i2c_addr[2];
+ struct af9033_config af9033_config[2];
+ struct af9033_ops ops;
+ #define AF9035_I2C_CLIENT_MAX 4
+ struct i2c_client *i2c_client[AF9035_I2C_CLIENT_MAX];
+ struct i2c_adapter *i2c_adapter_demod;
+};
+
+static const u32 clock_lut_af9035[] = {
+ 20480000, /* FPGA */
+ 16384000, /* 16.38 MHz */
+ 20480000, /* 20.48 MHz */
+ 36000000, /* 36.00 MHz */
+ 30000000, /* 30.00 MHz */
+ 26000000, /* 26.00 MHz */
+ 28000000, /* 28.00 MHz */
+ 32000000, /* 32.00 MHz */
+ 34000000, /* 34.00 MHz */
+ 24000000, /* 24.00 MHz */
+ 22000000, /* 22.00 MHz */
+ 12000000, /* 12.00 MHz */
+};
+
+static const u32 clock_lut_it9135[] = {
+ 12000000, /* 12.00 MHz */
+ 20480000, /* 20.48 MHz */
+ 36000000, /* 36.00 MHz */
+ 30000000, /* 30.00 MHz */
+ 26000000, /* 26.00 MHz */
+ 28000000, /* 28.00 MHz */
+ 32000000, /* 32.00 MHz */
+ 34000000, /* 34.00 MHz */
+ 24000000, /* 24.00 MHz */
+ 22000000, /* 22.00 MHz */
+};
+
+#define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw"
+#define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw"
+#define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw"
+#define AF9035_FIRMWARE_IT9303 "dvb-usb-it9303-01.fw"
+
+/*
+ * eeprom is memory mapped as read only. Writing that memory mapped address
+ * will not corrupt eeprom.
+ *
+ * TS mode:
+ * 0 TS
+ * 1 DCA + PIP
+ * 3 PIP
+ * n DCA
+ *
+ * Values 0 and 3 are seen to this day. 0 for single TS and 3 for dual TS.
+ */
+
+#define EEPROM_BASE_AF9035 0x42fd
+#define EEPROM_BASE_IT9135 0x499c
+#define EEPROM_SHIFT 0x10
+
+#define EEPROM_IR_MODE 0x10
+#define EEPROM_TS_MODE 0x29
+#define EEPROM_2ND_DEMOD_ADDR 0x2a
+#define EEPROM_IR_TYPE 0x2c
+#define EEPROM_1_IF_L 0x30
+#define EEPROM_1_IF_H 0x31
+#define EEPROM_1_TUNER_ID 0x34
+#define EEPROM_2_IF_L 0x40
+#define EEPROM_2_IF_H 0x41
+#define EEPROM_2_TUNER_ID 0x44
+
+/* USB commands */
+#define CMD_MEM_RD 0x00
+#define CMD_MEM_WR 0x01
+#define CMD_I2C_RD 0x02
+#define CMD_I2C_WR 0x03
+#define CMD_IR_GET 0x18
+#define CMD_FW_DL 0x21
+#define CMD_FW_QUERYINFO 0x22
+#define CMD_FW_BOOT 0x23
+#define CMD_FW_DL_BEGIN 0x24
+#define CMD_FW_DL_END 0x25
+#define CMD_FW_SCATTER_WR 0x29
+#define CMD_GENERIC_I2C_RD 0x2a
+#define CMD_GENERIC_I2C_WR 0x2b
+
+#endif
Code Review / kvmfornfv.git / blobdiff