--- /dev/null
+/* tuner-xc2028_types
+ *
+ * This file includes internal tipes to be used inside tuner-xc2028.
+ * Shouldn't be included outside tuner-xc2028
+ *
+ * Copyright (c) 2007-2008 Mauro Carvalho Chehab (mchehab@infradead.org)
+ * This code is placed under the terms of the GNU General Public License v2
+ */
+
+/* xc3028 firmware types */
+
+/* BASE firmware should be loaded before any other firmware */
+#define BASE (1<<0)
+#define BASE_TYPES (BASE|F8MHZ|MTS|FM|INPUT1|INPUT2|INIT1)
+
+/* F8MHZ marks BASE firmwares for 8 MHz Bandwidth */
+#define F8MHZ (1<<1)
+
+/* Multichannel Television Sound (MTS)
+ Those firmwares are capable of using xc2038 DSP to decode audio and
+ produce a baseband audio output on some pins of the chip.
+ There are MTS firmwares for the most used video standards. It should be
+ required to use MTS firmwares, depending on the way audio is routed into
+ the bridge chip
+ */
+#define MTS (1<<2)
+
+/* FIXME: I have no idea what's the difference between
+ D2620 and D2633 firmwares
+ */
+#define D2620 (1<<3)
+#define D2633 (1<<4)
+
+/* DTV firmwares for 6, 7 and 8 MHz
+ DTV6 - 6MHz - ATSC/DVB-C/DVB-T/ISDB-T/DOCSIS
+ DTV8 - 8MHz - DVB-C/DVB-T
+ */
+#define DTV6 (1 << 5)
+#define QAM (1 << 6)
+#define DTV7 (1<<7)
+#define DTV78 (1<<8)
+#define DTV8 (1<<9)
+
+#define DTV_TYPES (D2620|D2633|DTV6|QAM|DTV7|DTV78|DTV8|ATSC)
+
+/* There's a FM | BASE firmware + FM specific firmware (std=0) */
+#define FM (1<<10)
+
+#define STD_SPECIFIC_TYPES (MTS|FM|LCD|NOGD)
+
+/* Applies only for FM firmware
+ Makes it use RF input 1 (pin #2) instead of input 2 (pin #4)
+ */
+#define INPUT1 (1<<11)
+
+
+/* LCD firmwares exist only for MTS STD/MN (PAL or NTSC/M)
+ and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr)
+ There are variants both with and without NOGD
+ Those firmwares produce better result with LCD displays
+ */
+#define LCD (1<<12)
+
+/* NOGD firmwares exist only for MTS STD/MN (PAL or NTSC/M)
+ and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr)
+ The NOGD firmwares don't have group delay compensation filter
+ */
+#define NOGD (1<<13)
+
+/* Old firmwares were broken into init0 and init1 */
+#define INIT1 (1<<14)
+
+/* SCODE firmware selects particular behaviours */
+#define MONO (1 << 15)
+#define ATSC (1 << 16)
+#define IF (1 << 17)
+#define LG60 (1 << 18)
+#define ATI638 (1 << 19)
+#define OREN538 (1 << 20)
+#define OREN36 (1 << 21)
+#define TOYOTA388 (1 << 22)
+#define TOYOTA794 (1 << 23)
+#define DIBCOM52 (1 << 24)
+#define ZARLINK456 (1 << 25)
+#define CHINA (1 << 26)
+#define F6MHZ (1 << 27)
+#define INPUT2 (1 << 28)
+#define SCODE (1 << 29)
+
+/* This flag identifies that the scode table has a new format */
+#define HAS_IF (1 << 30)
+
+/* There are different scode tables for MTS and non-MTS.
+ The MTS firmwares support mono only
+ */
+#define SCODE_TYPES (SCODE | MTS)
+
+
+/* Newer types not defined on videodev2.h.
+ The original idea were to move all those types to videodev2.h, but
+ it seemed overkill, since, with the exception of SECAM/K3, the other
+ types seem to be autodetected.
+ It is not clear where secam/k3 is used, nor we have a feedback of this
+ working or being autodetected by the standard secam firmware.
+ */
+
+#define V4L2_STD_SECAM_K3 (0x04000000)
+
+/* Audio types */
+
+#define V4L2_STD_A2_A (1LL<<32)
+#define V4L2_STD_A2_B (1LL<<33)
+#define V4L2_STD_NICAM_A (1LL<<34)
+#define V4L2_STD_NICAM_B (1LL<<35)
+#define V4L2_STD_AM (1LL<<36)
+#define V4L2_STD_BTSC (1LL<<37)
+#define V4L2_STD_EIAJ (1LL<<38)
+
+#define V4L2_STD_A2 (V4L2_STD_A2_A | V4L2_STD_A2_B)
+#define V4L2_STD_NICAM (V4L2_STD_NICAM_A | V4L2_STD_NICAM_B)
+
+/* To preserve backward compatibility,
+ (std & V4L2_STD_AUDIO) = 0 means that ALL audio stds are supported
+ */
+
+#define V4L2_STD_AUDIO (V4L2_STD_A2 | \
+ V4L2_STD_NICAM | \
+ V4L2_STD_AM | \
+ V4L2_STD_BTSC | \
+ V4L2_STD_EIAJ)
+
+/* Used standards with audio restrictions */
+
+#define V4L2_STD_PAL_BG_A2_A (V4L2_STD_PAL_BG | V4L2_STD_A2_A)
+#define V4L2_STD_PAL_BG_A2_B (V4L2_STD_PAL_BG | V4L2_STD_A2_B)
+#define V4L2_STD_PAL_BG_NICAM_A (V4L2_STD_PAL_BG | V4L2_STD_NICAM_A)
+#define V4L2_STD_PAL_BG_NICAM_B (V4L2_STD_PAL_BG | V4L2_STD_NICAM_B)
+#define V4L2_STD_PAL_DK_A2 (V4L2_STD_PAL_DK | V4L2_STD_A2)
+#define V4L2_STD_PAL_DK_NICAM (V4L2_STD_PAL_DK | V4L2_STD_NICAM)
+#define V4L2_STD_SECAM_L_NICAM (V4L2_STD_SECAM_L | V4L2_STD_NICAM)
+#define V4L2_STD_SECAM_L_AM (V4L2_STD_SECAM_L | V4L2_STD_AM)
Code Review / kvmfornfv.git / blobdiff