Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / media / rc / img-ir / img-ir-sharp.c

diff --git a/kernel/drivers/media/rc/img-ir/img-ir-sharp.c b/kernel/drivers/media/rc/img-ir/img-ir-sharp.c
new file mode 100644 (file)
index 0000000..fe5acc4
--- /dev/null
+++ b/kernel/drivers/media/rc/img-ir/img-ir-sharp.c
@@ -0,0 +1,106 @@
+/*
+ * ImgTec IR Decoder setup for Sharp protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert Sharp data to a scancode */
+static int img_ir_sharp_scancode(int len, u64 raw, u64 enabled_protocols,
+                                struct img_ir_scancode_req *request)
+{
+       unsigned int addr, cmd, exp, chk;
+
+       if (len != 15)
+               return -EINVAL;
+
+       addr = (raw >>   0) & 0x1f;
+       cmd  = (raw >>   5) & 0xff;
+       exp  = (raw >>  13) &  0x1;
+       chk  = (raw >>  14) &  0x1;
+
+       /* validate data */
+       if (!exp)
+               return -EINVAL;
+       if (chk)
+               /* probably the second half of the message */
+               return -EINVAL;
+
+       request->protocol = RC_TYPE_SHARP;
+       request->scancode = addr << 8 | cmd;
+       return IMG_IR_SCANCODE;
+}
+
+/* Convert Sharp scancode to Sharp data filter */
+static int img_ir_sharp_filter(const struct rc_scancode_filter *in,
+                              struct img_ir_filter *out, u64 protocols)
+{
+       unsigned int addr, cmd, exp = 0, chk = 0;
+       unsigned int addr_m, cmd_m, exp_m = 0, chk_m = 0;
+
+       addr   = (in->data >> 8) & 0x1f;
+       addr_m = (in->mask >> 8) & 0x1f;
+       cmd    = (in->data >> 0) & 0xff;
+       cmd_m  = (in->mask >> 0) & 0xff;
+       if (cmd_m) {
+               /* if filtering commands, we can only match the first part */
+               exp   = 1;
+               exp_m = 1;
+               chk   = 0;
+               chk_m = 1;
+       }
+
+       out->data = addr        |
+                   cmd   <<  5 |
+                   exp   << 13 |
+                   chk   << 14;
+       out->mask = addr_m      |
+                   cmd_m <<  5 |
+                   exp_m << 13 |
+                   chk_m << 14;
+
+       return 0;
+}
+
+/*
+ * Sharp decoder
+ * See also http://www.sbprojects.com/knowledge/ir/sharp.php
+ */
+struct img_ir_decoder img_ir_sharp = {
+       .type = RC_BIT_SHARP,
+       .control = {
+               .decoden = 0,
+               .decodend2 = 1,
+               .code_type = IMG_IR_CODETYPE_PULSEDIST,
+               .d1validsel = 1,
+       },
+       /* main timings */
+       .tolerance = 20,        /* 20% */
+       .timings = {
+               /* 0 symbol */
+               .s10 = {
+                       .pulse = { 320  /* 320 us */ },
+                       .space = { 680  /* 1 ms period */ },
+               },
+               /* 1 symbol */
+               .s11 = {
+                       .pulse = { 320  /* 320 us */ },
+                       .space = { 1680 /* 2 ms period */ },
+               },
+               /* free time */
+               .ft = {
+                       .minlen = 15,
+                       .maxlen = 15,
+                       .ft_min = 5000, /* 5 ms */
+               },
+       },
+       /* scancode logic */
+       .scancode = img_ir_sharp_scancode,
+       .filter = img_ir_sharp_filter,
+};