Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / platform / vsp1 / vsp1_rpf.c
diff --git a/kernel/drivers/media/platform/vsp1/vsp1_rpf.c b/kernel/drivers/media/platform/vsp1/vsp1_rpf.c
new file mode 100644 (file)
index 0000000..3294529
--- /dev/null
@@ -0,0 +1,294 @@
+/*
+ * vsp1_rpf.c  --  R-Car VSP1 Read Pixel Formatter
+ *
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/device.h>
+
+#include <media/v4l2-subdev.h>
+
+#include "vsp1.h"
+#include "vsp1_rwpf.h"
+#include "vsp1_video.h"
+
+#define RPF_MAX_WIDTH                          8190
+#define RPF_MAX_HEIGHT                         8190
+
+/* -----------------------------------------------------------------------------
+ * Device Access
+ */
+
+static inline u32 vsp1_rpf_read(struct vsp1_rwpf *rpf, u32 reg)
+{
+       return vsp1_read(rpf->entity.vsp1,
+                        reg + rpf->entity.index * VI6_RPF_OFFSET);
+}
+
+static inline void vsp1_rpf_write(struct vsp1_rwpf *rpf, u32 reg, u32 data)
+{
+       vsp1_write(rpf->entity.vsp1,
+                  reg + rpf->entity.index * VI6_RPF_OFFSET, data);
+}
+
+/* -----------------------------------------------------------------------------
+ * Controls
+ */
+
+static int rpf_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+       struct vsp1_rwpf *rpf =
+               container_of(ctrl->handler, struct vsp1_rwpf, ctrls);
+       struct vsp1_pipeline *pipe;
+
+       if (!vsp1_entity_is_streaming(&rpf->entity))
+               return 0;
+
+       switch (ctrl->id) {
+       case V4L2_CID_ALPHA_COMPONENT:
+               vsp1_rpf_write(rpf, VI6_RPF_VRTCOL_SET,
+                              ctrl->val << VI6_RPF_VRTCOL_SET_LAYA_SHIFT);
+
+               pipe = to_vsp1_pipeline(&rpf->entity.subdev.entity);
+               vsp1_pipeline_propagate_alpha(pipe, &rpf->entity, ctrl->val);
+               break;
+       }
+
+       return 0;
+}
+
+static const struct v4l2_ctrl_ops rpf_ctrl_ops = {
+       .s_ctrl = rpf_s_ctrl,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Core Operations
+ */
+
+static int rpf_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+       struct vsp1_rwpf *rpf = to_rwpf(subdev);
+       const struct vsp1_format_info *fmtinfo = rpf->video.fmtinfo;
+       const struct v4l2_pix_format_mplane *format = &rpf->video.format;
+       const struct v4l2_rect *crop = &rpf->crop;
+       u32 pstride;
+       u32 infmt;
+       int ret;
+
+       ret = vsp1_entity_set_streaming(&rpf->entity, enable);
+       if (ret < 0)
+               return ret;
+
+       if (!enable)
+               return 0;
+
+       /* Source size, stride and crop offsets.
+        *
+        * The crop offsets correspond to the location of the crop rectangle top
+        * left corner in the plane buffer. Only two offsets are needed, as
+        * planes 2 and 3 always have identical strides.
+        */
+       vsp1_rpf_write(rpf, VI6_RPF_SRC_BSIZE,
+                      (crop->width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
+                      (crop->height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
+       vsp1_rpf_write(rpf, VI6_RPF_SRC_ESIZE,
+                      (crop->width << VI6_RPF_SRC_ESIZE_EHSIZE_SHIFT) |
+                      (crop->height << VI6_RPF_SRC_ESIZE_EVSIZE_SHIFT));
+
+       rpf->offsets[0] = crop->top * format->plane_fmt[0].bytesperline
+                       + crop->left * fmtinfo->bpp[0] / 8;
+       pstride = format->plane_fmt[0].bytesperline
+               << VI6_RPF_SRCM_PSTRIDE_Y_SHIFT;
+
+       vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_Y,
+                      rpf->buf_addr[0] + rpf->offsets[0]);
+
+       if (format->num_planes > 1) {
+               rpf->offsets[1] = crop->top * format->plane_fmt[1].bytesperline
+                               + crop->left * fmtinfo->bpp[1] / 8;
+               pstride |= format->plane_fmt[1].bytesperline
+                       << VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
+
+               vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C0,
+                              rpf->buf_addr[1] + rpf->offsets[1]);
+
+               if (format->num_planes > 2)
+                       vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C1,
+                                      rpf->buf_addr[2] + rpf->offsets[1]);
+       }
+
+       vsp1_rpf_write(rpf, VI6_RPF_SRCM_PSTRIDE, pstride);
+
+       /* Format */
+       infmt = VI6_RPF_INFMT_CIPM
+             | (fmtinfo->hwfmt << VI6_RPF_INFMT_RDFMT_SHIFT);
+
+       if (fmtinfo->swap_yc)
+               infmt |= VI6_RPF_INFMT_SPYCS;
+       if (fmtinfo->swap_uv)
+               infmt |= VI6_RPF_INFMT_SPUVS;
+
+       if (rpf->entity.formats[RWPF_PAD_SINK].code !=
+           rpf->entity.formats[RWPF_PAD_SOURCE].code)
+               infmt |= VI6_RPF_INFMT_CSC;
+
+       vsp1_rpf_write(rpf, VI6_RPF_INFMT, infmt);
+       vsp1_rpf_write(rpf, VI6_RPF_DSWAP, fmtinfo->swap);
+
+       /* Output location */
+       vsp1_rpf_write(rpf, VI6_RPF_LOC,
+                      (rpf->location.left << VI6_RPF_LOC_HCOORD_SHIFT) |
+                      (rpf->location.top << VI6_RPF_LOC_VCOORD_SHIFT));
+
+       /* Use the alpha channel (extended to 8 bits) when available or an
+        * alpha value set through the V4L2_CID_ALPHA_COMPONENT control
+        * otherwise. Disable color keying.
+        */
+       vsp1_rpf_write(rpf, VI6_RPF_ALPH_SEL, VI6_RPF_ALPH_SEL_AEXT_EXT |
+                      (fmtinfo->alpha ? VI6_RPF_ALPH_SEL_ASEL_PACKED
+                                      : VI6_RPF_ALPH_SEL_ASEL_FIXED));
+       vsp1_rpf_write(rpf, VI6_RPF_MSK_CTRL, 0);
+       vsp1_rpf_write(rpf, VI6_RPF_CKEY_CTRL, 0);
+
+       return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Operations
+ */
+
+static struct v4l2_subdev_video_ops rpf_video_ops = {
+       .s_stream = rpf_s_stream,
+};
+
+static struct v4l2_subdev_pad_ops rpf_pad_ops = {
+       .enum_mbus_code = vsp1_rwpf_enum_mbus_code,
+       .enum_frame_size = vsp1_rwpf_enum_frame_size,
+       .get_fmt = vsp1_rwpf_get_format,
+       .set_fmt = vsp1_rwpf_set_format,
+       .get_selection = vsp1_rwpf_get_selection,
+       .set_selection = vsp1_rwpf_set_selection,
+};
+
+static struct v4l2_subdev_ops rpf_ops = {
+       .video  = &rpf_video_ops,
+       .pad    = &rpf_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Video Device Operations
+ */
+
+static void rpf_vdev_queue(struct vsp1_video *video,
+                          struct vsp1_video_buffer *buf)
+{
+       struct vsp1_rwpf *rpf = container_of(video, struct vsp1_rwpf, video);
+       unsigned int i;
+
+       for (i = 0; i < 3; ++i)
+               rpf->buf_addr[i] = buf->addr[i];
+
+       if (!vsp1_entity_is_streaming(&rpf->entity))
+               return;
+
+       vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_Y,
+                      buf->addr[0] + rpf->offsets[0]);
+       if (buf->buf.num_planes > 1)
+               vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C0,
+                              buf->addr[1] + rpf->offsets[1]);
+       if (buf->buf.num_planes > 2)
+               vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C1,
+                              buf->addr[2] + rpf->offsets[1]);
+}
+
+static const struct vsp1_video_operations rpf_vdev_ops = {
+       .queue = rpf_vdev_queue,
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization and Cleanup
+ */
+
+struct vsp1_rwpf *vsp1_rpf_create(struct vsp1_device *vsp1, unsigned int index)
+{
+       struct v4l2_subdev *subdev;
+       struct vsp1_video *video;
+       struct vsp1_rwpf *rpf;
+       int ret;
+
+       rpf = devm_kzalloc(vsp1->dev, sizeof(*rpf), GFP_KERNEL);
+       if (rpf == NULL)
+               return ERR_PTR(-ENOMEM);
+
+       rpf->max_width = RPF_MAX_WIDTH;
+       rpf->max_height = RPF_MAX_HEIGHT;
+
+       rpf->entity.type = VSP1_ENTITY_RPF;
+       rpf->entity.index = index;
+
+       ret = vsp1_entity_init(vsp1, &rpf->entity, 2);
+       if (ret < 0)
+               return ERR_PTR(ret);
+
+       /* Initialize the V4L2 subdev. */
+       subdev = &rpf->entity.subdev;
+       v4l2_subdev_init(subdev, &rpf_ops);
+
+       subdev->entity.ops = &vsp1_media_ops;
+       subdev->internal_ops = &vsp1_subdev_internal_ops;
+       snprintf(subdev->name, sizeof(subdev->name), "%s rpf.%u",
+                dev_name(vsp1->dev), index);
+       v4l2_set_subdevdata(subdev, rpf);
+       subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+       vsp1_entity_init_formats(subdev, NULL);
+
+       /* Initialize the control handler. */
+       v4l2_ctrl_handler_init(&rpf->ctrls, 1);
+       v4l2_ctrl_new_std(&rpf->ctrls, &rpf_ctrl_ops, V4L2_CID_ALPHA_COMPONENT,
+                         0, 255, 1, 255);
+
+       rpf->entity.subdev.ctrl_handler = &rpf->ctrls;
+
+       if (rpf->ctrls.error) {
+               dev_err(vsp1->dev, "rpf%u: failed to initialize controls\n",
+                       index);
+               ret = rpf->ctrls.error;
+               goto error;
+       }
+
+       /* Initialize the video device. */
+       video = &rpf->video;
+
+       video->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
+       video->vsp1 = vsp1;
+       video->ops = &rpf_vdev_ops;
+
+       ret = vsp1_video_init(video, &rpf->entity);
+       if (ret < 0)
+               goto error;
+
+       rpf->entity.video = video;
+
+       /* Connect the video device to the RPF. */
+       ret = media_entity_create_link(&rpf->video.video.entity, 0,
+                                      &rpf->entity.subdev.entity,
+                                      RWPF_PAD_SINK,
+                                      MEDIA_LNK_FL_ENABLED |
+                                      MEDIA_LNK_FL_IMMUTABLE);
+       if (ret < 0)
+               goto error;
+
+       return rpf;
+
+error:
+       vsp1_entity_destroy(&rpf->entity);
+       return ERR_PTR(ret);
+}