/*
* Driver for the NXP SAA7164 PCIe bridge
*
- * Copyright (c) 2010 Steven Toth <stoth@kernellabs.com>
+ * Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* attached I2C devices, so we can simplify the virtual i2c mechansms
* and keep the -i2c.c implementation clean.
*/
+#define REGLEN_0bit 0
#define REGLEN_8bit 1
#define REGLEN_16bit 2
.i2c_reg_len = REGLEN_8bit,
} },
},
+ [SAA7164_BOARD_HAUPPAUGE_HVR2255proto] = {
+ .name = "Hauppauge WinTV-HVR2255(proto)",
+ .porta = SAA7164_MPEG_DVB,
+ .portb = SAA7164_MPEG_DVB,
+ .portc = SAA7164_MPEG_ENCODER,
+ .portd = SAA7164_MPEG_ENCODER,
+ .porte = SAA7164_MPEG_VBI,
+ .portf = SAA7164_MPEG_VBI,
+ .chiprev = SAA7164_CHIP_REV3,
+ .unit = {{
+ .id = 0x27,
+ .type = SAA7164_UNIT_EEPROM,
+ .name = "4K EEPROM",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xa0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x04,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "SI2157-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_0bit,
+ }, {
+ .id = 0x06,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "LGDT3306",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xb2 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x24,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "SI2157-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_0bit,
+ }, {
+ .id = 0x26,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "LGDT3306-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0x1c >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ } },
+ },
+ [SAA7164_BOARD_HAUPPAUGE_HVR2255] = {
+ .name = "Hauppauge WinTV-HVR2255",
+ .porta = SAA7164_MPEG_DVB,
+ .portb = SAA7164_MPEG_DVB,
+ .portc = SAA7164_MPEG_ENCODER,
+ .portd = SAA7164_MPEG_ENCODER,
+ .porte = SAA7164_MPEG_VBI,
+ .portf = SAA7164_MPEG_VBI,
+ .chiprev = SAA7164_CHIP_REV3,
+ .unit = {{
+ .id = 0x28,
+ .type = SAA7164_UNIT_EEPROM,
+ .name = "4K EEPROM",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xa0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x04,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "SI2157-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_0bit,
+ }, {
+ .id = 0x06,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "LGDT3306-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xb2 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x25,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "SI2157-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_0bit,
+ }, {
+ .id = 0x27,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "LGDT3306-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0x1c >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ } },
+ },
+ [SAA7164_BOARD_HAUPPAUGE_HVR2205] = {
+ .name = "Hauppauge WinTV-HVR2205",
+ .porta = SAA7164_MPEG_DVB,
+ .portb = SAA7164_MPEG_DVB,
+ .portc = SAA7164_MPEG_ENCODER,
+ .portd = SAA7164_MPEG_ENCODER,
+ .porte = SAA7164_MPEG_VBI,
+ .portf = SAA7164_MPEG_VBI,
+ .chiprev = SAA7164_CHIP_REV3,
+ .unit = {{
+ .id = 0x28,
+ .type = SAA7164_UNIT_EEPROM,
+ .name = "4K EEPROM",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xa0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x04,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "SI2157-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_0bit,
+ }, {
+ .id = 0x06,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "SI2168-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xc8 >> 1,
+ .i2c_reg_len = REGLEN_0bit,
+ }, {
+ .id = 0x25,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "SI2157-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_0bit,
+ }, {
+ .id = 0x27,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "SI2168-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xcc >> 1,
+ .i2c_reg_len = REGLEN_0bit,
+ } },
+ },
};
const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
.subvendor = 0x0070,
.subdevice = 0x8953,
.card = SAA7164_BOARD_HAUPPAUGE_HVR2200_5,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0xf111,
+ .card = SAA7164_BOARD_HAUPPAUGE_HVR2255,
+ /* Prototype card left here for documenation purposes.
+ .card = SAA7164_BOARD_HAUPPAUGE_HVR2255proto,
+ */
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0xf123,
+ .card = SAA7164_BOARD_HAUPPAUGE_HVR2205,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0xf120,
+ .card = SAA7164_BOARD_HAUPPAUGE_HVR2205,
},
};
const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2255proto:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2255:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2205:
/*
+ HVR2200 / HVR2250
GPIO 2: s5h1411 / tda10048-1 demod reset
GPIO 3: s5h1411 / tda10048-2 demod reset
GPIO 7: IRBlaster Zilog reset
*/
+ /* HVR2255
+ * GPIO 2: lgdg3306-1 demod reset
+ * GPIO 3: lgdt3306-2 demod reset
+ */
+
+ /* HVR2205
+ * GPIO 2: si2168-1 demod reset
+ * GPIO 3: si2168-2 demod reset
+ */
+
/* Reset parts by going in and out of reset */
saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
/* WinTV-HVR2200 (PCIe, Retail, half-height)
* DVB-T (TDA18271/TDA10048) and basic analog, no IR */
break;
+ case 151009:
+ /* First production board rev B2I6 */
+ /* WinTV-HVR2205 (PCIe, Retail, full-height bracket)
+ * DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */
+ break;
+ case 151609:
+ /* First production board rev B2I6 */
+ /* WinTV-HVR2205 (PCIe, Retail, half-height bracket)
+ * DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */
+ break;
+ case 151061:
+ /* First production board rev B1I6 */
+ /* WinTV-HVR2255 (PCIe, Retail, full-height bracket)
+ * ATSC/QAM (SI2157/LGDT3306) and basic analog, FM */
+ break;
default:
printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n",
dev->name, tv.model);
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2255proto:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2255:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2205:
hauppauge_eeprom(dev, &eeprom[0]);
break;
}
Code Review / kvmfornfv.git / blobdiff