Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / i2c / soc_camera / ov9740.c
diff --git a/kernel/drivers/media/i2c/soc_camera/ov9740.c b/kernel/drivers/media/i2c/soc_camera/ov9740.c
new file mode 100644 (file)
index 0000000..841dc55
--- /dev/null
@@ -0,0 +1,1008 @@
+/*
+ * OmniVision OV9740 Camera Driver
+ *
+ * Copyright (C) 2011 NVIDIA Corporation
+ *
+ * Based on ov9640 camera driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
+
+#include <media/soc_camera.h>
+#include <media/v4l2-clk.h>
+#include <media/v4l2-ctrls.h>
+
+#define to_ov9740(sd)          container_of(sd, struct ov9740_priv, subdev)
+
+/* General Status Registers */
+#define OV9740_MODEL_ID_HI             0x0000
+#define OV9740_MODEL_ID_LO             0x0001
+#define OV9740_REVISION_NUMBER         0x0002
+#define OV9740_MANUFACTURER_ID         0x0003
+#define OV9740_SMIA_VERSION            0x0004
+
+/* General Setup Registers */
+#define OV9740_MODE_SELECT             0x0100
+#define OV9740_IMAGE_ORT               0x0101
+#define OV9740_SOFTWARE_RESET          0x0103
+#define OV9740_GRP_PARAM_HOLD          0x0104
+#define OV9740_MSK_CORRUP_FM           0x0105
+
+/* Timing Setting */
+#define OV9740_FRM_LENGTH_LN_HI                0x0340 /* VTS */
+#define OV9740_FRM_LENGTH_LN_LO                0x0341 /* VTS */
+#define OV9740_LN_LENGTH_PCK_HI                0x0342 /* HTS */
+#define OV9740_LN_LENGTH_PCK_LO                0x0343 /* HTS */
+#define OV9740_X_ADDR_START_HI         0x0344
+#define OV9740_X_ADDR_START_LO         0x0345
+#define OV9740_Y_ADDR_START_HI         0x0346
+#define OV9740_Y_ADDR_START_LO         0x0347
+#define OV9740_X_ADDR_END_HI           0x0348
+#define OV9740_X_ADDR_END_LO           0x0349
+#define OV9740_Y_ADDR_END_HI           0x034a
+#define OV9740_Y_ADDR_END_LO           0x034b
+#define OV9740_X_OUTPUT_SIZE_HI                0x034c
+#define OV9740_X_OUTPUT_SIZE_LO                0x034d
+#define OV9740_Y_OUTPUT_SIZE_HI                0x034e
+#define OV9740_Y_OUTPUT_SIZE_LO                0x034f
+
+/* IO Control Registers */
+#define OV9740_IO_CREL00               0x3002
+#define OV9740_IO_CREL01               0x3004
+#define OV9740_IO_CREL02               0x3005
+#define OV9740_IO_OUTPUT_SEL01         0x3026
+#define OV9740_IO_OUTPUT_SEL02         0x3027
+
+/* AWB Registers */
+#define OV9740_AWB_MANUAL_CTRL         0x3406
+
+/* Analog Control Registers */
+#define OV9740_ANALOG_CTRL01           0x3601
+#define OV9740_ANALOG_CTRL02           0x3602
+#define OV9740_ANALOG_CTRL03           0x3603
+#define OV9740_ANALOG_CTRL04           0x3604
+#define OV9740_ANALOG_CTRL10           0x3610
+#define OV9740_ANALOG_CTRL12           0x3612
+#define OV9740_ANALOG_CTRL15           0x3615
+#define OV9740_ANALOG_CTRL20           0x3620
+#define OV9740_ANALOG_CTRL21           0x3621
+#define OV9740_ANALOG_CTRL22           0x3622
+#define OV9740_ANALOG_CTRL30           0x3630
+#define OV9740_ANALOG_CTRL31           0x3631
+#define OV9740_ANALOG_CTRL32           0x3632
+#define OV9740_ANALOG_CTRL33           0x3633
+
+/* Sensor Control */
+#define OV9740_SENSOR_CTRL03           0x3703
+#define OV9740_SENSOR_CTRL04           0x3704
+#define OV9740_SENSOR_CTRL05           0x3705
+#define OV9740_SENSOR_CTRL07           0x3707
+
+/* Timing Control */
+#define OV9740_TIMING_CTRL17           0x3817
+#define OV9740_TIMING_CTRL19           0x3819
+#define OV9740_TIMING_CTRL33           0x3833
+#define OV9740_TIMING_CTRL35           0x3835
+
+/* Banding Filter */
+#define OV9740_AEC_MAXEXPO_60_H                0x3a02
+#define OV9740_AEC_MAXEXPO_60_L                0x3a03
+#define OV9740_AEC_B50_STEP_HI         0x3a08
+#define OV9740_AEC_B50_STEP_LO         0x3a09
+#define OV9740_AEC_B60_STEP_HI         0x3a0a
+#define OV9740_AEC_B60_STEP_LO         0x3a0b
+#define OV9740_AEC_CTRL0D              0x3a0d
+#define OV9740_AEC_CTRL0E              0x3a0e
+#define OV9740_AEC_MAXEXPO_50_H                0x3a14
+#define OV9740_AEC_MAXEXPO_50_L                0x3a15
+
+/* AEC/AGC Control */
+#define OV9740_AEC_ENABLE              0x3503
+#define OV9740_GAIN_CEILING_01         0x3a18
+#define OV9740_GAIN_CEILING_02         0x3a19
+#define OV9740_AEC_HI_THRESHOLD                0x3a11
+#define OV9740_AEC_3A1A                        0x3a1a
+#define OV9740_AEC_CTRL1B_WPT2         0x3a1b
+#define OV9740_AEC_CTRL0F_WPT          0x3a0f
+#define OV9740_AEC_CTRL10_BPT          0x3a10
+#define OV9740_AEC_CTRL1E_BPT2         0x3a1e
+#define OV9740_AEC_LO_THRESHOLD                0x3a1f
+
+/* BLC Control */
+#define OV9740_BLC_AUTO_ENABLE         0x4002
+#define OV9740_BLC_MODE                        0x4005
+
+/* VFIFO */
+#define OV9740_VFIFO_READ_START_HI     0x4608
+#define OV9740_VFIFO_READ_START_LO     0x4609
+
+/* DVP Control */
+#define OV9740_DVP_VSYNC_CTRL02                0x4702
+#define OV9740_DVP_VSYNC_MODE          0x4704
+#define OV9740_DVP_VSYNC_CTRL06                0x4706
+
+/* PLL Setting */
+#define OV9740_PLL_MODE_CTRL01         0x3104
+#define OV9740_PRE_PLL_CLK_DIV         0x0305
+#define OV9740_PLL_MULTIPLIER          0x0307
+#define OV9740_VT_SYS_CLK_DIV          0x0303
+#define OV9740_VT_PIX_CLK_DIV          0x0301
+#define OV9740_PLL_CTRL3010            0x3010
+#define OV9740_VFIFO_CTRL00            0x460e
+
+/* ISP Control */
+#define OV9740_ISP_CTRL00              0x5000
+#define OV9740_ISP_CTRL01              0x5001
+#define OV9740_ISP_CTRL03              0x5003
+#define OV9740_ISP_CTRL05              0x5005
+#define OV9740_ISP_CTRL12              0x5012
+#define OV9740_ISP_CTRL19              0x5019
+#define OV9740_ISP_CTRL1A              0x501a
+#define OV9740_ISP_CTRL1E              0x501e
+#define OV9740_ISP_CTRL1F              0x501f
+#define OV9740_ISP_CTRL20              0x5020
+#define OV9740_ISP_CTRL21              0x5021
+
+/* AWB */
+#define OV9740_AWB_CTRL00              0x5180
+#define OV9740_AWB_CTRL01              0x5181
+#define OV9740_AWB_CTRL02              0x5182
+#define OV9740_AWB_CTRL03              0x5183
+#define OV9740_AWB_ADV_CTRL01          0x5184
+#define OV9740_AWB_ADV_CTRL02          0x5185
+#define OV9740_AWB_ADV_CTRL03          0x5186
+#define OV9740_AWB_ADV_CTRL04          0x5187
+#define OV9740_AWB_ADV_CTRL05          0x5188
+#define OV9740_AWB_ADV_CTRL06          0x5189
+#define OV9740_AWB_ADV_CTRL07          0x518a
+#define OV9740_AWB_ADV_CTRL08          0x518b
+#define OV9740_AWB_ADV_CTRL09          0x518c
+#define OV9740_AWB_ADV_CTRL10          0x518d
+#define OV9740_AWB_ADV_CTRL11          0x518e
+#define OV9740_AWB_CTRL0F              0x518f
+#define OV9740_AWB_CTRL10              0x5190
+#define OV9740_AWB_CTRL11              0x5191
+#define OV9740_AWB_CTRL12              0x5192
+#define OV9740_AWB_CTRL13              0x5193
+#define OV9740_AWB_CTRL14              0x5194
+
+/* MIPI Control */
+#define OV9740_MIPI_CTRL00             0x4800
+#define OV9740_MIPI_3837               0x3837
+#define OV9740_MIPI_CTRL01             0x4801
+#define OV9740_MIPI_CTRL03             0x4803
+#define OV9740_MIPI_CTRL05             0x4805
+#define OV9740_VFIFO_RD_CTRL           0x4601
+#define OV9740_MIPI_CTRL_3012          0x3012
+#define OV9740_SC_CMMM_MIPI_CTR                0x3014
+
+#define OV9740_MAX_WIDTH               1280
+#define OV9740_MAX_HEIGHT              720
+
+/* Misc. structures */
+struct ov9740_reg {
+       u16                             reg;
+       u8                              val;
+};
+
+struct ov9740_priv {
+       struct v4l2_subdev              subdev;
+       struct v4l2_ctrl_handler        hdl;
+       struct v4l2_clk                 *clk;
+
+       u16                             model;
+       u8                              revision;
+       u8                              manid;
+       u8                              smiaver;
+
+       bool                            flag_vflip;
+       bool                            flag_hflip;
+
+       /* For suspend/resume. */
+       struct v4l2_mbus_framefmt       current_mf;
+       bool                            current_enable;
+};
+
+static const struct ov9740_reg ov9740_defaults[] = {
+       /* Software Reset */
+       { OV9740_SOFTWARE_RESET,        0x01 },
+
+       /* Banding Filter */
+       { OV9740_AEC_B50_STEP_HI,       0x00 },
+       { OV9740_AEC_B50_STEP_LO,       0xe8 },
+       { OV9740_AEC_CTRL0E,            0x03 },
+       { OV9740_AEC_MAXEXPO_50_H,      0x15 },
+       { OV9740_AEC_MAXEXPO_50_L,      0xc6 },
+       { OV9740_AEC_B60_STEP_HI,       0x00 },
+       { OV9740_AEC_B60_STEP_LO,       0xc0 },
+       { OV9740_AEC_CTRL0D,            0x04 },
+       { OV9740_AEC_MAXEXPO_60_H,      0x18 },
+       { OV9740_AEC_MAXEXPO_60_L,      0x20 },
+
+       /* LC */
+       { 0x5842, 0x02 }, { 0x5843, 0x5e }, { 0x5844, 0x04 }, { 0x5845, 0x32 },
+       { 0x5846, 0x03 }, { 0x5847, 0x29 }, { 0x5848, 0x02 }, { 0x5849, 0xcc },
+
+       /* Un-documented OV9740 registers */
+       { 0x5800, 0x29 }, { 0x5801, 0x25 }, { 0x5802, 0x20 }, { 0x5803, 0x21 },
+       { 0x5804, 0x26 }, { 0x5805, 0x2e }, { 0x5806, 0x11 }, { 0x5807, 0x0c },
+       { 0x5808, 0x09 }, { 0x5809, 0x0a }, { 0x580a, 0x0e }, { 0x580b, 0x16 },
+       { 0x580c, 0x06 }, { 0x580d, 0x02 }, { 0x580e, 0x00 }, { 0x580f, 0x00 },
+       { 0x5810, 0x04 }, { 0x5811, 0x0a }, { 0x5812, 0x05 }, { 0x5813, 0x02 },
+       { 0x5814, 0x00 }, { 0x5815, 0x00 }, { 0x5816, 0x03 }, { 0x5817, 0x09 },
+       { 0x5818, 0x0f }, { 0x5819, 0x0a }, { 0x581a, 0x07 }, { 0x581b, 0x08 },
+       { 0x581c, 0x0b }, { 0x581d, 0x14 }, { 0x581e, 0x28 }, { 0x581f, 0x23 },
+       { 0x5820, 0x1d }, { 0x5821, 0x1e }, { 0x5822, 0x24 }, { 0x5823, 0x2a },
+       { 0x5824, 0x4f }, { 0x5825, 0x6f }, { 0x5826, 0x5f }, { 0x5827, 0x7f },
+       { 0x5828, 0x9f }, { 0x5829, 0x5f }, { 0x582a, 0x8f }, { 0x582b, 0x9e },
+       { 0x582c, 0x8f }, { 0x582d, 0x9f }, { 0x582e, 0x4f }, { 0x582f, 0x87 },
+       { 0x5830, 0x86 }, { 0x5831, 0x97 }, { 0x5832, 0xae }, { 0x5833, 0x3f },
+       { 0x5834, 0x8e }, { 0x5835, 0x7c }, { 0x5836, 0x7e }, { 0x5837, 0xaf },
+       { 0x5838, 0x8f }, { 0x5839, 0x8f }, { 0x583a, 0x9f }, { 0x583b, 0x7f },
+       { 0x583c, 0x5f },
+
+       /* Y Gamma */
+       { 0x5480, 0x07 }, { 0x5481, 0x18 }, { 0x5482, 0x2c }, { 0x5483, 0x4e },
+       { 0x5484, 0x5e }, { 0x5485, 0x6b }, { 0x5486, 0x77 }, { 0x5487, 0x82 },
+       { 0x5488, 0x8c }, { 0x5489, 0x95 }, { 0x548a, 0xa4 }, { 0x548b, 0xb1 },
+       { 0x548c, 0xc6 }, { 0x548d, 0xd8 }, { 0x548e, 0xe9 },
+
+       /* UV Gamma */
+       { 0x5490, 0x0f }, { 0x5491, 0xff }, { 0x5492, 0x0d }, { 0x5493, 0x05 },
+       { 0x5494, 0x07 }, { 0x5495, 0x1a }, { 0x5496, 0x04 }, { 0x5497, 0x01 },
+       { 0x5498, 0x03 }, { 0x5499, 0x53 }, { 0x549a, 0x02 }, { 0x549b, 0xeb },
+       { 0x549c, 0x02 }, { 0x549d, 0xa0 }, { 0x549e, 0x02 }, { 0x549f, 0x67 },
+       { 0x54a0, 0x02 }, { 0x54a1, 0x3b }, { 0x54a2, 0x02 }, { 0x54a3, 0x18 },
+       { 0x54a4, 0x01 }, { 0x54a5, 0xe7 }, { 0x54a6, 0x01 }, { 0x54a7, 0xc3 },
+       { 0x54a8, 0x01 }, { 0x54a9, 0x94 }, { 0x54aa, 0x01 }, { 0x54ab, 0x72 },
+       { 0x54ac, 0x01 }, { 0x54ad, 0x57 },
+
+       /* AWB */
+       { OV9740_AWB_CTRL00,            0xf0 },
+       { OV9740_AWB_CTRL01,            0x00 },
+       { OV9740_AWB_CTRL02,            0x41 },
+       { OV9740_AWB_CTRL03,            0x42 },
+       { OV9740_AWB_ADV_CTRL01,        0x8a },
+       { OV9740_AWB_ADV_CTRL02,        0x61 },
+       { OV9740_AWB_ADV_CTRL03,        0xce },
+       { OV9740_AWB_ADV_CTRL04,        0xa8 },
+       { OV9740_AWB_ADV_CTRL05,        0x17 },
+       { OV9740_AWB_ADV_CTRL06,        0x1f },
+       { OV9740_AWB_ADV_CTRL07,        0x27 },
+       { OV9740_AWB_ADV_CTRL08,        0x41 },
+       { OV9740_AWB_ADV_CTRL09,        0x34 },
+       { OV9740_AWB_ADV_CTRL10,        0xf0 },
+       { OV9740_AWB_ADV_CTRL11,        0x10 },
+       { OV9740_AWB_CTRL0F,            0xff },
+       { OV9740_AWB_CTRL10,            0x00 },
+       { OV9740_AWB_CTRL11,            0xff },
+       { OV9740_AWB_CTRL12,            0x00 },
+       { OV9740_AWB_CTRL13,            0xff },
+       { OV9740_AWB_CTRL14,            0x00 },
+
+       /* CIP */
+       { 0x530d, 0x12 },
+
+       /* CMX */
+       { 0x5380, 0x01 }, { 0x5381, 0x00 }, { 0x5382, 0x00 }, { 0x5383, 0x17 },
+       { 0x5384, 0x00 }, { 0x5385, 0x01 }, { 0x5386, 0x00 }, { 0x5387, 0x00 },
+       { 0x5388, 0x00 }, { 0x5389, 0xe0 }, { 0x538a, 0x00 }, { 0x538b, 0x20 },
+       { 0x538c, 0x00 }, { 0x538d, 0x00 }, { 0x538e, 0x00 }, { 0x538f, 0x16 },
+       { 0x5390, 0x00 }, { 0x5391, 0x9c }, { 0x5392, 0x00 }, { 0x5393, 0xa0 },
+       { 0x5394, 0x18 },
+
+       /* 50/60 Detection */
+       { 0x3c0a, 0x9c }, { 0x3c0b, 0x3f },
+
+       /* Output Select */
+       { OV9740_IO_OUTPUT_SEL01,       0x00 },
+       { OV9740_IO_OUTPUT_SEL02,       0x00 },
+       { OV9740_IO_CREL00,             0x00 },
+       { OV9740_IO_CREL01,             0x00 },
+       { OV9740_IO_CREL02,             0x00 },
+
+       /* AWB Control */
+       { OV9740_AWB_MANUAL_CTRL,       0x00 },
+
+       /* Analog Control */
+       { OV9740_ANALOG_CTRL03,         0xaa },
+       { OV9740_ANALOG_CTRL32,         0x2f },
+       { OV9740_ANALOG_CTRL20,         0x66 },
+       { OV9740_ANALOG_CTRL21,         0xc0 },
+       { OV9740_ANALOG_CTRL31,         0x52 },
+       { OV9740_ANALOG_CTRL33,         0x50 },
+       { OV9740_ANALOG_CTRL30,         0xca },
+       { OV9740_ANALOG_CTRL04,         0x0c },
+       { OV9740_ANALOG_CTRL01,         0x40 },
+       { OV9740_ANALOG_CTRL02,         0x16 },
+       { OV9740_ANALOG_CTRL10,         0xa1 },
+       { OV9740_ANALOG_CTRL12,         0x24 },
+       { OV9740_ANALOG_CTRL22,         0x9f },
+       { OV9740_ANALOG_CTRL15,         0xf0 },
+
+       /* Sensor Control */
+       { OV9740_SENSOR_CTRL03,         0x42 },
+       { OV9740_SENSOR_CTRL04,         0x10 },
+       { OV9740_SENSOR_CTRL05,         0x45 },
+       { OV9740_SENSOR_CTRL07,         0x14 },
+
+       /* Timing Control */
+       { OV9740_TIMING_CTRL33,         0x04 },
+       { OV9740_TIMING_CTRL35,         0x02 },
+       { OV9740_TIMING_CTRL19,         0x6e },
+       { OV9740_TIMING_CTRL17,         0x94 },
+
+       /* AEC/AGC Control */
+       { OV9740_AEC_ENABLE,            0x10 },
+       { OV9740_GAIN_CEILING_01,       0x00 },
+       { OV9740_GAIN_CEILING_02,       0x7f },
+       { OV9740_AEC_HI_THRESHOLD,      0xa0 },
+       { OV9740_AEC_3A1A,              0x05 },
+       { OV9740_AEC_CTRL1B_WPT2,       0x50 },
+       { OV9740_AEC_CTRL0F_WPT,        0x50 },
+       { OV9740_AEC_CTRL10_BPT,        0x4c },
+       { OV9740_AEC_CTRL1E_BPT2,       0x4c },
+       { OV9740_AEC_LO_THRESHOLD,      0x26 },
+
+       /* BLC Control */
+       { OV9740_BLC_AUTO_ENABLE,       0x45 },
+       { OV9740_BLC_MODE,              0x18 },
+
+       /* DVP Control */
+       { OV9740_DVP_VSYNC_CTRL02,      0x04 },
+       { OV9740_DVP_VSYNC_MODE,        0x00 },
+       { OV9740_DVP_VSYNC_CTRL06,      0x08 },
+
+       /* PLL Setting */
+       { OV9740_PLL_MODE_CTRL01,       0x20 },
+       { OV9740_PRE_PLL_CLK_DIV,       0x03 },
+       { OV9740_PLL_MULTIPLIER,        0x4c },
+       { OV9740_VT_SYS_CLK_DIV,        0x01 },
+       { OV9740_VT_PIX_CLK_DIV,        0x08 },
+       { OV9740_PLL_CTRL3010,          0x01 },
+       { OV9740_VFIFO_CTRL00,          0x82 },
+
+       /* Timing Setting */
+       /* VTS */
+       { OV9740_FRM_LENGTH_LN_HI,      0x03 },
+       { OV9740_FRM_LENGTH_LN_LO,      0x07 },
+       /* HTS */
+       { OV9740_LN_LENGTH_PCK_HI,      0x06 },
+       { OV9740_LN_LENGTH_PCK_LO,      0x62 },
+
+       /* MIPI Control */
+       { OV9740_MIPI_CTRL00,           0x44 }, /* 0x64 for discontinuous clk */
+       { OV9740_MIPI_3837,             0x01 },
+       { OV9740_MIPI_CTRL01,           0x0f },
+       { OV9740_MIPI_CTRL03,           0x05 },
+       { OV9740_MIPI_CTRL05,           0x10 },
+       { OV9740_VFIFO_RD_CTRL,         0x16 },
+       { OV9740_MIPI_CTRL_3012,        0x70 },
+       { OV9740_SC_CMMM_MIPI_CTR,      0x01 },
+
+       /* YUYV order */
+       { OV9740_ISP_CTRL19,            0x02 },
+};
+
+static u32 ov9740_codes[] = {
+       MEDIA_BUS_FMT_YUYV8_2X8,
+};
+
+/* read a register */
+static int ov9740_reg_read(struct i2c_client *client, u16 reg, u8 *val)
+{
+       int ret;
+       struct i2c_msg msg[] = {
+               {
+                       .addr   = client->addr,
+                       .flags  = 0,
+                       .len    = 2,
+                       .buf    = (u8 *)&reg,
+               },
+               {
+                       .addr   = client->addr,
+                       .flags  = I2C_M_RD,
+                       .len    = 1,
+                       .buf    = val,
+               },
+       };
+
+       reg = swab16(reg);
+
+       ret = i2c_transfer(client->adapter, msg, 2);
+       if (ret < 0) {
+               dev_err(&client->dev, "Failed reading register 0x%04x!\n", reg);
+               return ret;
+       }
+
+       return 0;
+}
+
+/* write a register */
+static int ov9740_reg_write(struct i2c_client *client, u16 reg, u8 val)
+{
+       struct i2c_msg msg;
+       struct {
+               u16 reg;
+               u8 val;
+       } __packed buf;
+       int ret;
+
+       reg = swab16(reg);
+
+       buf.reg = reg;
+       buf.val = val;
+
+       msg.addr        = client->addr;
+       msg.flags       = 0;
+       msg.len         = 3;
+       msg.buf         = (u8 *)&buf;
+
+       ret = i2c_transfer(client->adapter, &msg, 1);
+       if (ret < 0) {
+               dev_err(&client->dev, "Failed writing register 0x%04x!\n", reg);
+               return ret;
+       }
+
+       return 0;
+}
+
+
+/* Read a register, alter its bits, write it back */
+static int ov9740_reg_rmw(struct i2c_client *client, u16 reg, u8 set, u8 unset)
+{
+       u8 val;
+       int ret;
+
+       ret = ov9740_reg_read(client, reg, &val);
+       if (ret < 0) {
+               dev_err(&client->dev,
+                       "[Read]-Modify-Write of register 0x%04x failed!\n",
+                       reg);
+               return ret;
+       }
+
+       val |= set;
+       val &= ~unset;
+
+       ret = ov9740_reg_write(client, reg, val);
+       if (ret < 0) {
+               dev_err(&client->dev,
+                       "Read-Modify-[Write] of register 0x%04x failed!\n",
+                       reg);
+               return ret;
+       }
+
+       return 0;
+}
+
+static int ov9740_reg_write_array(struct i2c_client *client,
+                                 const struct ov9740_reg *regarray,
+                                 int regarraylen)
+{
+       int i;
+       int ret;
+
+       for (i = 0; i < regarraylen; i++) {
+               ret = ov9740_reg_write(client,
+                                      regarray[i].reg, regarray[i].val);
+               if (ret < 0)
+                       return ret;
+       }
+
+       return 0;
+}
+
+/* Start/Stop streaming from the device */
+static int ov9740_s_stream(struct v4l2_subdev *sd, int enable)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+       struct ov9740_priv *priv = to_ov9740(sd);
+       int ret;
+
+       /* Program orientation register. */
+       if (priv->flag_vflip)
+               ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0x2, 0);
+       else
+               ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0, 0x2);
+       if (ret < 0)
+               return ret;
+
+       if (priv->flag_hflip)
+               ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0x1, 0);
+       else
+               ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0, 0x1);
+       if (ret < 0)
+               return ret;
+
+       if (enable) {
+               dev_dbg(&client->dev, "Enabling Streaming\n");
+               /* Start Streaming */
+               ret = ov9740_reg_write(client, OV9740_MODE_SELECT, 0x01);
+
+       } else {
+               dev_dbg(&client->dev, "Disabling Streaming\n");
+               /* Software Reset */
+               ret = ov9740_reg_write(client, OV9740_SOFTWARE_RESET, 0x01);
+               if (!ret)
+                       /* Setting Streaming to Standby */
+                       ret = ov9740_reg_write(client, OV9740_MODE_SELECT,
+                                              0x00);
+       }
+
+       priv->current_enable = enable;
+
+       return ret;
+}
+
+/* select nearest higher resolution for capture */
+static void ov9740_res_roundup(u32 *width, u32 *height)
+{
+       /* Width must be a multiple of 4 pixels. */
+       *width = ALIGN(*width, 4);
+
+       /* Max resolution is 1280x720 (720p). */
+       if (*width > OV9740_MAX_WIDTH)
+               *width = OV9740_MAX_WIDTH;
+
+       if (*height > OV9740_MAX_HEIGHT)
+               *height = OV9740_MAX_HEIGHT;
+}
+
+/* Setup registers according to resolution and color encoding */
+static int ov9740_set_res(struct i2c_client *client, u32 width, u32 height)
+{
+       u32 x_start;
+       u32 y_start;
+       u32 x_end;
+       u32 y_end;
+       bool scaling = false;
+       u32 scale_input_x;
+       u32 scale_input_y;
+       int ret;
+
+       if ((width != OV9740_MAX_WIDTH) || (height != OV9740_MAX_HEIGHT))
+               scaling = true;
+
+       /*
+        * Try to use as much of the sensor area as possible when supporting
+        * smaller resolutions.  Depending on the aspect ratio of the
+        * chosen resolution, we can either use the full width of the sensor,
+        * or the full height of the sensor (or both if the aspect ratio is
+        * the same as 1280x720.
+        */
+       if ((OV9740_MAX_WIDTH * height) > (OV9740_MAX_HEIGHT * width)) {
+               scale_input_x = (OV9740_MAX_HEIGHT * width) / height;
+               scale_input_y = OV9740_MAX_HEIGHT;
+       } else {
+               scale_input_x = OV9740_MAX_WIDTH;
+               scale_input_y = (OV9740_MAX_WIDTH * height) / width;
+       }
+
+       /* These describe the area of the sensor to use. */
+       x_start = (OV9740_MAX_WIDTH - scale_input_x) / 2;
+       y_start = (OV9740_MAX_HEIGHT - scale_input_y) / 2;
+       x_end = x_start + scale_input_x - 1;
+       y_end = y_start + scale_input_y - 1;
+
+       ret = ov9740_reg_write(client, OV9740_X_ADDR_START_HI, x_start >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_X_ADDR_START_LO, x_start & 0xff);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_HI, y_start >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_LO, y_start & 0xff);
+       if (ret)
+               goto done;
+
+       ret = ov9740_reg_write(client, OV9740_X_ADDR_END_HI, x_end >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_X_ADDR_END_LO, x_end & 0xff);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_HI, y_end >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_LO, y_end & 0xff);
+       if (ret)
+               goto done;
+
+       ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_HI, width >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_LO, width & 0xff);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_HI, height >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_LO, height & 0xff);
+       if (ret)
+               goto done;
+
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL1E, scale_input_x >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL1F, scale_input_x & 0xff);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL20, scale_input_y >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL21, scale_input_y & 0xff);
+       if (ret)
+               goto done;
+
+       ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_HI,
+                              (scale_input_x - width) >> 8);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_LO,
+                              (scale_input_x - width) & 0xff);
+       if (ret)
+               goto done;
+
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL00, 0xff);
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL01, 0xef |
+                                                         (scaling << 4));
+       if (ret)
+               goto done;
+       ret = ov9740_reg_write(client, OV9740_ISP_CTRL03, 0xff);
+
+done:
+       return ret;
+}
+
+/* set the format we will capture in */
+static int ov9740_s_fmt(struct v4l2_subdev *sd,
+                       struct v4l2_mbus_framefmt *mf)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+       struct ov9740_priv *priv = to_ov9740(sd);
+       enum v4l2_colorspace cspace;
+       u32 code = mf->code;
+       int ret;
+
+       ov9740_res_roundup(&mf->width, &mf->height);
+
+       switch (code) {
+       case MEDIA_BUS_FMT_YUYV8_2X8:
+               cspace = V4L2_COLORSPACE_SRGB;
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       ret = ov9740_reg_write_array(client, ov9740_defaults,
+                                    ARRAY_SIZE(ov9740_defaults));
+       if (ret < 0)
+               return ret;
+
+       ret = ov9740_set_res(client, mf->width, mf->height);
+       if (ret < 0)
+               return ret;
+
+       mf->code        = code;
+       mf->colorspace  = cspace;
+
+       memcpy(&priv->current_mf, mf, sizeof(struct v4l2_mbus_framefmt));
+
+       return ret;
+}
+
+static int ov9740_try_fmt(struct v4l2_subdev *sd,
+                         struct v4l2_mbus_framefmt *mf)
+{
+       ov9740_res_roundup(&mf->width, &mf->height);
+
+       mf->field = V4L2_FIELD_NONE;
+       mf->code = MEDIA_BUS_FMT_YUYV8_2X8;
+       mf->colorspace = V4L2_COLORSPACE_SRGB;
+
+       return 0;
+}
+
+static int ov9740_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
+                          u32 *code)
+{
+       if (index >= ARRAY_SIZE(ov9740_codes))
+               return -EINVAL;
+
+       *code = ov9740_codes[index];
+
+       return 0;
+}
+
+static int ov9740_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+       a->bounds.left          = 0;
+       a->bounds.top           = 0;
+       a->bounds.width         = OV9740_MAX_WIDTH;
+       a->bounds.height        = OV9740_MAX_HEIGHT;
+       a->defrect              = a->bounds;
+       a->type                 = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+       a->pixelaspect.numerator        = 1;
+       a->pixelaspect.denominator      = 1;
+
+       return 0;
+}
+
+static int ov9740_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+       a->c.left               = 0;
+       a->c.top                = 0;
+       a->c.width              = OV9740_MAX_WIDTH;
+       a->c.height             = OV9740_MAX_HEIGHT;
+       a->type                 = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+       return 0;
+}
+
+/* Set status of additional camera capabilities */
+static int ov9740_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+       struct ov9740_priv *priv =
+               container_of(ctrl->handler, struct ov9740_priv, hdl);
+
+       switch (ctrl->id) {
+       case V4L2_CID_VFLIP:
+               priv->flag_vflip = ctrl->val;
+               break;
+       case V4L2_CID_HFLIP:
+               priv->flag_hflip = ctrl->val;
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int ov9740_s_power(struct v4l2_subdev *sd, int on)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+       struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+       struct ov9740_priv *priv = to_ov9740(sd);
+       int ret;
+
+       if (on) {
+               ret = soc_camera_power_on(&client->dev, ssdd, priv->clk);
+               if (ret < 0)
+                       return ret;
+
+               if (priv->current_enable) {
+                       ov9740_s_fmt(sd, &priv->current_mf);
+                       ov9740_s_stream(sd, 1);
+               }
+       } else {
+               if (priv->current_enable) {
+                       ov9740_s_stream(sd, 0);
+                       priv->current_enable = true;
+               }
+
+               soc_camera_power_off(&client->dev, ssdd, priv->clk);
+       }
+
+       return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov9740_get_register(struct v4l2_subdev *sd,
+                              struct v4l2_dbg_register *reg)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+       int ret;
+       u8 val;
+
+       if (reg->reg & ~0xffff)
+               return -EINVAL;
+
+       reg->size = 2;
+
+       ret = ov9740_reg_read(client, reg->reg, &val);
+       if (ret)
+               return ret;
+
+       reg->val = (__u64)val;
+
+       return ret;
+}
+
+static int ov9740_set_register(struct v4l2_subdev *sd,
+                              const struct v4l2_dbg_register *reg)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+       if (reg->reg & ~0xffff || reg->val & ~0xff)
+               return -EINVAL;
+
+       return ov9740_reg_write(client, reg->reg, reg->val);
+}
+#endif
+
+static int ov9740_video_probe(struct i2c_client *client)
+{
+       struct v4l2_subdev *sd = i2c_get_clientdata(client);
+       struct ov9740_priv *priv = to_ov9740(sd);
+       u8 modelhi, modello;
+       int ret;
+
+       ret = ov9740_s_power(&priv->subdev, 1);
+       if (ret < 0)
+               return ret;
+
+       /*
+        * check and show product ID and manufacturer ID
+        */
+       ret = ov9740_reg_read(client, OV9740_MODEL_ID_HI, &modelhi);
+       if (ret < 0)
+               goto done;
+
+       ret = ov9740_reg_read(client, OV9740_MODEL_ID_LO, &modello);
+       if (ret < 0)
+               goto done;
+
+       priv->model = (modelhi << 8) | modello;
+
+       ret = ov9740_reg_read(client, OV9740_REVISION_NUMBER, &priv->revision);
+       if (ret < 0)
+               goto done;
+
+       ret = ov9740_reg_read(client, OV9740_MANUFACTURER_ID, &priv->manid);
+       if (ret < 0)
+               goto done;
+
+       ret = ov9740_reg_read(client, OV9740_SMIA_VERSION, &priv->smiaver);
+       if (ret < 0)
+               goto done;
+
+       if (priv->model != 0x9740) {
+               ret = -ENODEV;
+               goto done;
+       }
+
+       dev_info(&client->dev, "ov9740 Model ID 0x%04x, Revision 0x%02x, "
+                "Manufacturer 0x%02x, SMIA Version 0x%02x\n",
+                priv->model, priv->revision, priv->manid, priv->smiaver);
+
+       ret = v4l2_ctrl_handler_setup(&priv->hdl);
+
+done:
+       ov9740_s_power(&priv->subdev, 0);
+       return ret;
+}
+
+/* Request bus settings on camera side */
+static int ov9740_g_mbus_config(struct v4l2_subdev *sd,
+                               struct v4l2_mbus_config *cfg)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+       struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+
+       cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+               V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+               V4L2_MBUS_DATA_ACTIVE_HIGH;
+       cfg->type = V4L2_MBUS_PARALLEL;
+       cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
+
+       return 0;
+}
+
+static struct v4l2_subdev_video_ops ov9740_video_ops = {
+       .s_stream       = ov9740_s_stream,
+       .s_mbus_fmt     = ov9740_s_fmt,
+       .try_mbus_fmt   = ov9740_try_fmt,
+       .enum_mbus_fmt  = ov9740_enum_fmt,
+       .cropcap        = ov9740_cropcap,
+       .g_crop         = ov9740_g_crop,
+       .g_mbus_config  = ov9740_g_mbus_config,
+};
+
+static struct v4l2_subdev_core_ops ov9740_core_ops = {
+       .s_power                = ov9740_s_power,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+       .g_register             = ov9740_get_register,
+       .s_register             = ov9740_set_register,
+#endif
+};
+
+static struct v4l2_subdev_ops ov9740_subdev_ops = {
+       .core                   = &ov9740_core_ops,
+       .video                  = &ov9740_video_ops,
+};
+
+static const struct v4l2_ctrl_ops ov9740_ctrl_ops = {
+       .s_ctrl = ov9740_s_ctrl,
+};
+
+/*
+ * i2c_driver function
+ */
+static int ov9740_probe(struct i2c_client *client,
+                       const struct i2c_device_id *did)
+{
+       struct ov9740_priv *priv;
+       struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+       int ret;
+
+       if (!ssdd) {
+               dev_err(&client->dev, "Missing platform_data for driver\n");
+               return -EINVAL;
+       }
+
+       priv = devm_kzalloc(&client->dev, sizeof(struct ov9740_priv), GFP_KERNEL);
+       if (!priv) {
+               dev_err(&client->dev, "Failed to allocate private data!\n");
+               return -ENOMEM;
+       }
+
+       v4l2_i2c_subdev_init(&priv->subdev, client, &ov9740_subdev_ops);
+       v4l2_ctrl_handler_init(&priv->hdl, 13);
+       v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops,
+                       V4L2_CID_VFLIP, 0, 1, 1, 0);
+       v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops,
+                       V4L2_CID_HFLIP, 0, 1, 1, 0);
+       priv->subdev.ctrl_handler = &priv->hdl;
+       if (priv->hdl.error)
+               return priv->hdl.error;
+
+       priv->clk = v4l2_clk_get(&client->dev, "mclk");
+       if (IS_ERR(priv->clk)) {
+               ret = PTR_ERR(priv->clk);
+               goto eclkget;
+       }
+
+       ret = ov9740_video_probe(client);
+       if (ret < 0) {
+               v4l2_clk_put(priv->clk);
+eclkget:
+               v4l2_ctrl_handler_free(&priv->hdl);
+       }
+
+       return ret;
+}
+
+static int ov9740_remove(struct i2c_client *client)
+{
+       struct ov9740_priv *priv = i2c_get_clientdata(client);
+
+       v4l2_clk_put(priv->clk);
+       v4l2_device_unregister_subdev(&priv->subdev);
+       v4l2_ctrl_handler_free(&priv->hdl);
+       return 0;
+}
+
+static const struct i2c_device_id ov9740_id[] = {
+       { "ov9740", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, ov9740_id);
+
+static struct i2c_driver ov9740_i2c_driver = {
+       .driver = {
+               .name = "ov9740",
+       },
+       .probe    = ov9740_probe,
+       .remove   = ov9740_remove,
+       .id_table = ov9740_id,
+};
+
+module_i2c_driver(ov9740_i2c_driver);
+
+MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV9740");
+MODULE_AUTHOR("Andrew Chew <achew@nvidia.com>");
+MODULE_LICENSE("GPL v2");