Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / media / i2c / lm3560.c
diff --git a/kernel/drivers/media/i2c/lm3560.c b/kernel/drivers/media/i2c/lm3560.c
new file mode 100644 (file)
index 0000000..d9ece4b
--- /dev/null
@@ -0,0 +1,488 @@
+/*
+ * drivers/media/i2c/lm3560.c
+ * General device driver for TI lm3560, FLASH LED Driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * Contact: Daniel Jeong <gshark.jeong@gmail.com>
+ *                     Ldd-Mlp <ldd-mlp@list.ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/videodev2.h>
+#include <media/lm3560.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+
+/* registers definitions */
+#define REG_ENABLE             0x10
+#define REG_TORCH_BR   0xa0
+#define REG_FLASH_BR   0xb0
+#define REG_FLASH_TOUT 0xc0
+#define REG_FLAG               0xd0
+#define REG_CONFIG1            0xe0
+
+/* fault mask */
+#define FAULT_TIMEOUT  (1<<0)
+#define FAULT_OVERTEMP (1<<1)
+#define FAULT_SHORT_CIRCUIT    (1<<2)
+
+enum led_enable {
+       MODE_SHDN = 0x0,
+       MODE_TORCH = 0x2,
+       MODE_FLASH = 0x3,
+};
+
+/**
+ * struct lm3560_flash
+ *
+ * @pdata: platform data
+ * @regmap: reg. map for i2c
+ * @lock: muxtex for serial access.
+ * @led_mode: V4L2 LED mode
+ * @ctrls_led: V4L2 contols
+ * @subdev_led: V4L2 subdev
+ */
+struct lm3560_flash {
+       struct device *dev;
+       struct lm3560_platform_data *pdata;
+       struct regmap *regmap;
+       struct mutex lock;
+
+       enum v4l2_flash_led_mode led_mode;
+       struct v4l2_ctrl_handler ctrls_led[LM3560_LED_MAX];
+       struct v4l2_subdev subdev_led[LM3560_LED_MAX];
+};
+
+#define to_lm3560_flash(_ctrl, _no)    \
+       container_of(_ctrl->handler, struct lm3560_flash, ctrls_led[_no])
+
+/* enable mode control */
+static int lm3560_mode_ctrl(struct lm3560_flash *flash)
+{
+       int rval = -EINVAL;
+
+       switch (flash->led_mode) {
+       case V4L2_FLASH_LED_MODE_NONE:
+               rval = regmap_update_bits(flash->regmap,
+                                         REG_ENABLE, 0x03, MODE_SHDN);
+               break;
+       case V4L2_FLASH_LED_MODE_TORCH:
+               rval = regmap_update_bits(flash->regmap,
+                                         REG_ENABLE, 0x03, MODE_TORCH);
+               break;
+       case V4L2_FLASH_LED_MODE_FLASH:
+               rval = regmap_update_bits(flash->regmap,
+                                         REG_ENABLE, 0x03, MODE_FLASH);
+               break;
+       }
+       return rval;
+}
+
+/* led1/2 enable/disable */
+static int lm3560_enable_ctrl(struct lm3560_flash *flash,
+                             enum lm3560_led_id led_no, bool on)
+{
+       int rval;
+
+       if (led_no == LM3560_LED0) {
+               if (on)
+                       rval = regmap_update_bits(flash->regmap,
+                                                 REG_ENABLE, 0x08, 0x08);
+               else
+                       rval = regmap_update_bits(flash->regmap,
+                                                 REG_ENABLE, 0x08, 0x00);
+       } else {
+               if (on)
+                       rval = regmap_update_bits(flash->regmap,
+                                                 REG_ENABLE, 0x10, 0x10);
+               else
+                       rval = regmap_update_bits(flash->regmap,
+                                                 REG_ENABLE, 0x10, 0x00);
+       }
+       return rval;
+}
+
+/* torch1/2 brightness control */
+static int lm3560_torch_brt_ctrl(struct lm3560_flash *flash,
+                                enum lm3560_led_id led_no, unsigned int brt)
+{
+       int rval;
+       u8 br_bits;
+
+       if (brt < LM3560_TORCH_BRT_MIN)
+               return lm3560_enable_ctrl(flash, led_no, false);
+       else
+               rval = lm3560_enable_ctrl(flash, led_no, true);
+
+       br_bits = LM3560_TORCH_BRT_uA_TO_REG(brt);
+       if (led_no == LM3560_LED0)
+               rval = regmap_update_bits(flash->regmap,
+                                         REG_TORCH_BR, 0x07, br_bits);
+       else
+               rval = regmap_update_bits(flash->regmap,
+                                         REG_TORCH_BR, 0x38, br_bits << 3);
+
+       return rval;
+}
+
+/* flash1/2 brightness control */
+static int lm3560_flash_brt_ctrl(struct lm3560_flash *flash,
+                                enum lm3560_led_id led_no, unsigned int brt)
+{
+       int rval;
+       u8 br_bits;
+
+       if (brt < LM3560_FLASH_BRT_MIN)
+               return lm3560_enable_ctrl(flash, led_no, false);
+       else
+               rval = lm3560_enable_ctrl(flash, led_no, true);
+
+       br_bits = LM3560_FLASH_BRT_uA_TO_REG(brt);
+       if (led_no == LM3560_LED0)
+               rval = regmap_update_bits(flash->regmap,
+                                         REG_FLASH_BR, 0x0f, br_bits);
+       else
+               rval = regmap_update_bits(flash->regmap,
+                                         REG_FLASH_BR, 0xf0, br_bits << 4);
+
+       return rval;
+}
+
+/* v4l2 controls  */
+static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
+{
+       struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no);
+       int rval = -EINVAL;
+
+       mutex_lock(&flash->lock);
+
+       if (ctrl->id == V4L2_CID_FLASH_FAULT) {
+               s32 fault = 0;
+               unsigned int reg_val;
+               rval = regmap_read(flash->regmap, REG_FLAG, &reg_val);
+               if (rval < 0)
+                       goto out;
+               if (reg_val & FAULT_SHORT_CIRCUIT)
+                       fault |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
+               if (reg_val & FAULT_OVERTEMP)
+                       fault |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
+               if (reg_val & FAULT_TIMEOUT)
+                       fault |= V4L2_FLASH_FAULT_TIMEOUT;
+               ctrl->cur.val = fault;
+       }
+
+out:
+       mutex_unlock(&flash->lock);
+       return rval;
+}
+
+static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
+{
+       struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no);
+       u8 tout_bits;
+       int rval = -EINVAL;
+
+       mutex_lock(&flash->lock);
+
+       switch (ctrl->id) {
+       case V4L2_CID_FLASH_LED_MODE:
+               flash->led_mode = ctrl->val;
+               if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
+                       rval = lm3560_mode_ctrl(flash);
+               break;
+
+       case V4L2_CID_FLASH_STROBE_SOURCE:
+               rval = regmap_update_bits(flash->regmap,
+                                         REG_CONFIG1, 0x04, (ctrl->val) << 2);
+               if (rval < 0)
+                       goto err_out;
+               break;
+
+       case V4L2_CID_FLASH_STROBE:
+               if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
+                       rval = -EBUSY;
+                       goto err_out;
+               }
+               flash->led_mode = V4L2_FLASH_LED_MODE_FLASH;
+               rval = lm3560_mode_ctrl(flash);
+               break;
+
+       case V4L2_CID_FLASH_STROBE_STOP:
+               if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
+                       rval = -EBUSY;
+                       goto err_out;
+               }
+               flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
+               rval = lm3560_mode_ctrl(flash);
+               break;
+
+       case V4L2_CID_FLASH_TIMEOUT:
+               tout_bits = LM3560_FLASH_TOUT_ms_TO_REG(ctrl->val);
+               rval = regmap_update_bits(flash->regmap,
+                                         REG_FLASH_TOUT, 0x1f, tout_bits);
+               break;
+
+       case V4L2_CID_FLASH_INTENSITY:
+               rval = lm3560_flash_brt_ctrl(flash, led_no, ctrl->val);
+               break;
+
+       case V4L2_CID_FLASH_TORCH_INTENSITY:
+               rval = lm3560_torch_brt_ctrl(flash, led_no, ctrl->val);
+               break;
+       }
+
+err_out:
+       mutex_unlock(&flash->lock);
+       return rval;
+}
+
+static int lm3560_led1_get_ctrl(struct v4l2_ctrl *ctrl)
+{
+       return lm3560_get_ctrl(ctrl, LM3560_LED1);
+}
+
+static int lm3560_led1_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+       return lm3560_set_ctrl(ctrl, LM3560_LED1);
+}
+
+static int lm3560_led0_get_ctrl(struct v4l2_ctrl *ctrl)
+{
+       return lm3560_get_ctrl(ctrl, LM3560_LED0);
+}
+
+static int lm3560_led0_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+       return lm3560_set_ctrl(ctrl, LM3560_LED0);
+}
+
+static const struct v4l2_ctrl_ops lm3560_led_ctrl_ops[LM3560_LED_MAX] = {
+       [LM3560_LED0] = {
+                        .g_volatile_ctrl = lm3560_led0_get_ctrl,
+                        .s_ctrl = lm3560_led0_set_ctrl,
+                        },
+       [LM3560_LED1] = {
+                        .g_volatile_ctrl = lm3560_led1_get_ctrl,
+                        .s_ctrl = lm3560_led1_set_ctrl,
+                        }
+};
+
+static int lm3560_init_controls(struct lm3560_flash *flash,
+                               enum lm3560_led_id led_no)
+{
+       struct v4l2_ctrl *fault;
+       u32 max_flash_brt = flash->pdata->max_flash_brt[led_no];
+       u32 max_torch_brt = flash->pdata->max_torch_brt[led_no];
+       struct v4l2_ctrl_handler *hdl = &flash->ctrls_led[led_no];
+       const struct v4l2_ctrl_ops *ops = &lm3560_led_ctrl_ops[led_no];
+
+       v4l2_ctrl_handler_init(hdl, 8);
+
+       /* flash mode */
+       v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_LED_MODE,
+                              V4L2_FLASH_LED_MODE_TORCH, ~0x7,
+                              V4L2_FLASH_LED_MODE_NONE);
+       flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
+
+       /* flash source */
+       v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_STROBE_SOURCE,
+                              0x1, ~0x3, V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
+
+       /* flash strobe */
+       v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
+
+       /* flash strobe stop */
+       v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
+
+       /* flash strobe timeout */
+       v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TIMEOUT,
+                         LM3560_FLASH_TOUT_MIN,
+                         flash->pdata->max_flash_timeout,
+                         LM3560_FLASH_TOUT_STEP,
+                         flash->pdata->max_flash_timeout);
+
+       /* flash brt */
+       v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_INTENSITY,
+                         LM3560_FLASH_BRT_MIN, max_flash_brt,
+                         LM3560_FLASH_BRT_STEP, max_flash_brt);
+
+       /* torch brt */
+       v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TORCH_INTENSITY,
+                         LM3560_TORCH_BRT_MIN, max_torch_brt,
+                         LM3560_TORCH_BRT_STEP, max_torch_brt);
+
+       /* fault */
+       fault = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_FAULT, 0,
+                                 V4L2_FLASH_FAULT_OVER_VOLTAGE
+                                 | V4L2_FLASH_FAULT_OVER_TEMPERATURE
+                                 | V4L2_FLASH_FAULT_SHORT_CIRCUIT
+                                 | V4L2_FLASH_FAULT_TIMEOUT, 0, 0);
+       if (fault != NULL)
+               fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
+
+       if (hdl->error)
+               return hdl->error;
+
+       flash->subdev_led[led_no].ctrl_handler = hdl;
+       return 0;
+}
+
+/* initialize device */
+static const struct v4l2_subdev_ops lm3560_ops = {
+       .core = NULL,
+};
+
+static const struct regmap_config lm3560_regmap = {
+       .reg_bits = 8,
+       .val_bits = 8,
+       .max_register = 0xFF,
+};
+
+static int lm3560_subdev_init(struct lm3560_flash *flash,
+                             enum lm3560_led_id led_no, char *led_name)
+{
+       struct i2c_client *client = to_i2c_client(flash->dev);
+       int rval;
+
+       v4l2_i2c_subdev_init(&flash->subdev_led[led_no], client, &lm3560_ops);
+       flash->subdev_led[led_no].flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+       strcpy(flash->subdev_led[led_no].name, led_name);
+       rval = lm3560_init_controls(flash, led_no);
+       if (rval)
+               goto err_out;
+       rval = media_entity_init(&flash->subdev_led[led_no].entity, 0, NULL, 0);
+       if (rval < 0)
+               goto err_out;
+       flash->subdev_led[led_no].entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
+
+       return rval;
+
+err_out:
+       v4l2_ctrl_handler_free(&flash->ctrls_led[led_no]);
+       return rval;
+}
+
+static int lm3560_init_device(struct lm3560_flash *flash)
+{
+       int rval;
+       unsigned int reg_val;
+
+       /* set peak current */
+       rval = regmap_update_bits(flash->regmap,
+                                 REG_FLASH_TOUT, 0x60, flash->pdata->peak);
+       if (rval < 0)
+               return rval;
+       /* output disable */
+       flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
+       rval = lm3560_mode_ctrl(flash);
+       if (rval < 0)
+               return rval;
+       /* reset faults */
+       rval = regmap_read(flash->regmap, REG_FLAG, &reg_val);
+       return rval;
+}
+
+static int lm3560_probe(struct i2c_client *client,
+                       const struct i2c_device_id *devid)
+{
+       struct lm3560_flash *flash;
+       struct lm3560_platform_data *pdata = dev_get_platdata(&client->dev);
+       int rval;
+
+       flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
+       if (flash == NULL)
+               return -ENOMEM;
+
+       flash->regmap = devm_regmap_init_i2c(client, &lm3560_regmap);
+       if (IS_ERR(flash->regmap)) {
+               rval = PTR_ERR(flash->regmap);
+               return rval;
+       }
+
+       /* if there is no platform data, use chip default value */
+       if (pdata == NULL) {
+               pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+               if (pdata == NULL)
+                       return -ENODEV;
+               pdata->peak = LM3560_PEAK_3600mA;
+               pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
+               /* led 1 */
+               pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX;
+               pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX;
+               /* led 2 */
+               pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX;
+               pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX;
+       }
+       flash->pdata = pdata;
+       flash->dev = &client->dev;
+       mutex_init(&flash->lock);
+
+       rval = lm3560_subdev_init(flash, LM3560_LED0, "lm3560-led0");
+       if (rval < 0)
+               return rval;
+
+       rval = lm3560_subdev_init(flash, LM3560_LED1, "lm3560-led1");
+       if (rval < 0)
+               return rval;
+
+       rval = lm3560_init_device(flash);
+       if (rval < 0)
+               return rval;
+
+       i2c_set_clientdata(client, flash);
+
+       return 0;
+}
+
+static int lm3560_remove(struct i2c_client *client)
+{
+       struct lm3560_flash *flash = i2c_get_clientdata(client);
+       unsigned int i;
+
+       for (i = LM3560_LED0; i < LM3560_LED_MAX; i++) {
+               v4l2_device_unregister_subdev(&flash->subdev_led[i]);
+               v4l2_ctrl_handler_free(&flash->ctrls_led[i]);
+               media_entity_cleanup(&flash->subdev_led[i].entity);
+       }
+
+       return 0;
+}
+
+static const struct i2c_device_id lm3560_id_table[] = {
+       {LM3560_NAME, 0},
+       {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lm3560_id_table);
+
+static struct i2c_driver lm3560_i2c_driver = {
+       .driver = {
+                  .name = LM3560_NAME,
+                  .pm = NULL,
+                  },
+       .probe = lm3560_probe,
+       .remove = lm3560_remove,
+       .id_table = lm3560_id_table,
+};
+
+module_i2c_driver(lm3560_i2c_driver);
+
+MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
+MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>");
+MODULE_DESCRIPTION("Texas Instruments LM3560 LED flash driver");
+MODULE_LICENSE("GPL");