--- /dev/null
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop.c - main module part
+ * Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@desy.de>
+ * based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
+ *
+ * Acknowledgements:
+ * John Jurrius from BBTI, Inc. for extensive support
+ * with code examples and data books
+ * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
+ *
+ * Contributions to the skystar2-driver have been done by
+ * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
+ * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
+ * Uwe Bugla, uwe.bugla at gmx.de (doing tests, restyling code, writing docu)
+ * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac
+ * filtering)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include "flexcop.h"
+
+#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de"
+
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define DEBSTATUS ""
+#else
+#define DEBSTATUS " (debugging is not enabled)"
+#endif
+
+int b2c2_flexcop_debug;
+EXPORT_SYMBOL_GPL(b2c2_flexcop_debug);
+module_param_named(debug, b2c2_flexcop_debug, int, 0644);
+MODULE_PARM_DESC(debug,
+ "set debug level (1=info,2=tuner,4=i2c,8=ts,"
+ "16=sram,32=reg (|-able))."
+ DEBSTATUS);
+#undef DEBSTATUS
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/* global zero for ibi values */
+flexcop_ibi_value ibi_zero;
+
+static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct flexcop_device *fc = dvbdmxfeed->demux->priv;
+ return flexcop_pid_feed_control(fc, dvbdmxfeed, 1);
+}
+
+static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct flexcop_device *fc = dvbdmxfeed->demux->priv;
+ return flexcop_pid_feed_control(fc, dvbdmxfeed, 0);
+}
+
+static int flexcop_dvb_init(struct flexcop_device *fc)
+{
+ int ret = dvb_register_adapter(&fc->dvb_adapter,
+ "FlexCop Digital TV device", fc->owner,
+ fc->dev, adapter_nr);
+ if (ret < 0) {
+ err("error registering DVB adapter");
+ return ret;
+ }
+ fc->dvb_adapter.priv = fc;
+
+ fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING
+ | DMX_MEMORY_BASED_FILTERING);
+ fc->demux.priv = fc;
+ fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED;
+ fc->demux.start_feed = flexcop_dvb_start_feed;
+ fc->demux.stop_feed = flexcop_dvb_stop_feed;
+ fc->demux.write_to_decoder = NULL;
+
+ ret = dvb_dmx_init(&fc->demux);
+ if (ret < 0) {
+ err("dvb_dmx failed: error %d", ret);
+ goto err_dmx;
+ }
+
+ fc->hw_frontend.source = DMX_FRONTEND_0;
+
+ fc->dmxdev.filternum = fc->demux.feednum;
+ fc->dmxdev.demux = &fc->demux.dmx;
+ fc->dmxdev.capabilities = 0;
+ ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter);
+ if (ret < 0) {
+ err("dvb_dmxdev_init failed: error %d", ret);
+ goto err_dmx_dev;
+ }
+
+ ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend);
+ if (ret < 0) {
+ err("adding hw_frontend to dmx failed: error %d", ret);
+ goto err_dmx_add_hw_frontend;
+ }
+
+ fc->mem_frontend.source = DMX_MEMORY_FE;
+ ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend);
+ if (ret < 0) {
+ err("adding mem_frontend to dmx failed: error %d", ret);
+ goto err_dmx_add_mem_frontend;
+ }
+
+ ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend);
+ if (ret < 0) {
+ err("connect frontend failed: error %d", ret);
+ goto err_connect_frontend;
+ }
+
+ ret = dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx);
+ if (ret < 0) {
+ err("dvb_net_init failed: error %d", ret);
+ goto err_net;
+ }
+
+ fc->init_state |= FC_STATE_DVB_INIT;
+ return 0;
+
+err_net:
+ fc->demux.dmx.disconnect_frontend(&fc->demux.dmx);
+err_connect_frontend:
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->mem_frontend);
+err_dmx_add_mem_frontend:
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->hw_frontend);
+err_dmx_add_hw_frontend:
+ dvb_dmxdev_release(&fc->dmxdev);
+err_dmx_dev:
+ dvb_dmx_release(&fc->demux);
+err_dmx:
+ dvb_unregister_adapter(&fc->dvb_adapter);
+ return ret;
+}
+
+static void flexcop_dvb_exit(struct flexcop_device *fc)
+{
+ if (fc->init_state & FC_STATE_DVB_INIT) {
+ dvb_net_release(&fc->dvbnet);
+
+ fc->demux.dmx.close(&fc->demux.dmx);
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx,
+ &fc->mem_frontend);
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx,
+ &fc->hw_frontend);
+ dvb_dmxdev_release(&fc->dmxdev);
+ dvb_dmx_release(&fc->demux);
+ dvb_unregister_adapter(&fc->dvb_adapter);
+ deb_info("deinitialized dvb stuff\n");
+ }
+ fc->init_state &= ~FC_STATE_DVB_INIT;
+}
+
+/* these methods are necessary to achieve the long-term-goal of hiding the
+ * struct flexcop_device from the bus-parts */
+void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len)
+{
+ dvb_dmx_swfilter(&fc->demux, buf, len);
+}
+EXPORT_SYMBOL(flexcop_pass_dmx_data);
+
+void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no)
+{
+ dvb_dmx_swfilter_packets(&fc->demux, buf, no);
+}
+EXPORT_SYMBOL(flexcop_pass_dmx_packets);
+
+static void flexcop_reset(struct flexcop_device *fc)
+{
+ flexcop_ibi_value v210, v204;
+
+ /* reset the flexcop itself */
+ fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
+
+ v210.raw = 0;
+ v210.sw_reset_210.reset_block_000 = 1;
+ v210.sw_reset_210.reset_block_100 = 1;
+ v210.sw_reset_210.reset_block_200 = 1;
+ v210.sw_reset_210.reset_block_300 = 1;
+ v210.sw_reset_210.reset_block_400 = 1;
+ v210.sw_reset_210.reset_block_500 = 1;
+ v210.sw_reset_210.reset_block_600 = 1;
+ v210.sw_reset_210.reset_block_700 = 1;
+ v210.sw_reset_210.Block_reset_enable = 0xb2;
+ v210.sw_reset_210.Special_controls = 0xc259;
+ fc->write_ibi_reg(fc,sw_reset_210,v210);
+ msleep(1);
+
+ /* reset the periphical devices */
+
+ v204 = fc->read_ibi_reg(fc,misc_204);
+ v204.misc_204.Per_reset_sig = 0;
+ fc->write_ibi_reg(fc,misc_204,v204);
+ msleep(1);
+ v204.misc_204.Per_reset_sig = 1;
+ fc->write_ibi_reg(fc,misc_204,v204);
+}
+
+void flexcop_reset_block_300(struct flexcop_device *fc)
+{
+ flexcop_ibi_value v208_save = fc->read_ibi_reg(fc, ctrl_208),
+ v210 = fc->read_ibi_reg(fc, sw_reset_210);
+
+ deb_rdump("208: %08x, 210: %08x\n", v208_save.raw, v210.raw);
+ fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
+
+ v210.sw_reset_210.reset_block_300 = 1;
+ v210.sw_reset_210.Block_reset_enable = 0xb2;
+
+ fc->write_ibi_reg(fc,sw_reset_210,v210);
+ fc->write_ibi_reg(fc,ctrl_208,v208_save);
+}
+
+struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len)
+{
+ void *bus;
+ struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device),
+ GFP_KERNEL);
+ if (!fc) {
+ err("no memory");
+ return NULL;
+ }
+
+ bus = kzalloc(bus_specific_len, GFP_KERNEL);
+ if (!bus) {
+ err("no memory");
+ kfree(fc);
+ return NULL;
+ }
+
+ fc->bus_specific = bus;
+
+ return fc;
+}
+EXPORT_SYMBOL(flexcop_device_kmalloc);
+
+void flexcop_device_kfree(struct flexcop_device *fc)
+{
+ kfree(fc->bus_specific);
+ kfree(fc);
+}
+EXPORT_SYMBOL(flexcop_device_kfree);
+
+int flexcop_device_initialize(struct flexcop_device *fc)
+{
+ int ret;
+ ibi_zero.raw = 0;
+
+ flexcop_reset(fc);
+ flexcop_determine_revision(fc);
+ flexcop_sram_init(fc);
+ flexcop_hw_filter_init(fc);
+ flexcop_smc_ctrl(fc, 0);
+
+ ret = flexcop_dvb_init(fc);
+ if (ret)
+ goto error;
+
+ /* i2c has to be done before doing EEProm stuff -
+ * because the EEProm is accessed via i2c */
+ ret = flexcop_i2c_init(fc);
+ if (ret)
+ goto error;
+
+ /* do the MAC address reading after initializing the dvb_adapter */
+ if (fc->get_mac_addr(fc, 0) == 0) {
+ u8 *b = fc->dvb_adapter.proposed_mac;
+ info("MAC address = %pM", b);
+ flexcop_set_mac_filter(fc,b);
+ flexcop_mac_filter_ctrl(fc,1);
+ } else
+ warn("reading of MAC address failed.\n");
+
+ ret = flexcop_frontend_init(fc);
+ if (ret)
+ goto error;
+
+ flexcop_device_name(fc,"initialization of","complete");
+ return 0;
+
+error:
+ flexcop_device_exit(fc);
+ return ret;
+}
+EXPORT_SYMBOL(flexcop_device_initialize);
+
+void flexcop_device_exit(struct flexcop_device *fc)
+{
+ flexcop_frontend_exit(fc);
+ flexcop_i2c_exit(fc);
+ flexcop_dvb_exit(fc);
+}
+EXPORT_SYMBOL(flexcop_device_exit);
+
+static int flexcop_module_init(void)
+{
+ info(DRIVER_NAME " loaded successfully");
+ return 0;
+}
+
+static void flexcop_module_cleanup(void)
+{
+ info(DRIVER_NAME " unloaded successfully");
+}
+
+module_init(flexcop_module_init);
+module_exit(flexcop_module_cleanup);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_NAME);
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff