--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
+ * All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef _QIB_COMMON_H
+#define _QIB_COMMON_H
+
+/*
+ * This file contains defines, structures, etc. that are used
+ * to communicate between kernel and user code.
+ */
+
+/* This is the IEEE-assigned OUI for QLogic Inc. QLogic_IB */
+#define QIB_SRC_OUI_1 0x00
+#define QIB_SRC_OUI_2 0x11
+#define QIB_SRC_OUI_3 0x75
+
+/* version of protocol header (known to chip also). In the long run,
+ * we should be able to generate and accept a range of version numbers;
+ * for now we only accept one, and it's compiled in.
+ */
+#define IPS_PROTO_VERSION 2
+
+/*
+ * These are compile time constants that you may want to enable or disable
+ * if you are trying to debug problems with code or performance.
+ * QIB_VERBOSE_TRACING define as 1 if you want additional tracing in
+ * fastpath code
+ * QIB_TRACE_REGWRITES define as 1 if you want register writes to be
+ * traced in faspath code
+ * _QIB_TRACING define as 0 if you want to remove all tracing in a
+ * compilation unit
+ */
+
+/*
+ * The value in the BTH QP field that QLogic_IB uses to differentiate
+ * an qlogic_ib protocol IB packet vs standard IB transport
+ * This it needs to be even (0x656b78), because the LSB is sometimes
+ * used for the MSB of context. The change may cause a problem
+ * interoperating with older software.
+ */
+#define QIB_KD_QP 0x656b78
+
+/*
+ * These are the status bits readable (in ascii form, 64bit value)
+ * from the "status" sysfs file. For binary compatibility, values
+ * must remain as is; removed states can be reused for different
+ * purposes.
+ */
+#define QIB_STATUS_INITTED 0x1 /* basic initialization done */
+/* Chip has been found and initted */
+#define QIB_STATUS_CHIP_PRESENT 0x20
+/* IB link is at ACTIVE, usable for data traffic */
+#define QIB_STATUS_IB_READY 0x40
+/* link is configured, LID, MTU, etc. have been set */
+#define QIB_STATUS_IB_CONF 0x80
+/* A Fatal hardware error has occurred. */
+#define QIB_STATUS_HWERROR 0x200
+
+/*
+ * The list of usermode accessible registers. Also see Reg_* later in file.
+ */
+enum qib_ureg {
+ /* (RO) DMA RcvHdr to be used next. */
+ ur_rcvhdrtail = 0,
+ /* (RW) RcvHdr entry to be processed next by host. */
+ ur_rcvhdrhead = 1,
+ /* (RO) Index of next Eager index to use. */
+ ur_rcvegrindextail = 2,
+ /* (RW) Eager TID to be processed next */
+ ur_rcvegrindexhead = 3,
+ /* For internal use only; max register number. */
+ _QIB_UregMax
+};
+
+/* bit values for spi_runtime_flags */
+#define QIB_RUNTIME_PCIE 0x0002
+#define QIB_RUNTIME_FORCE_WC_ORDER 0x0004
+#define QIB_RUNTIME_RCVHDR_COPY 0x0008
+#define QIB_RUNTIME_MASTER 0x0010
+#define QIB_RUNTIME_RCHK 0x0020
+#define QIB_RUNTIME_NODMA_RTAIL 0x0080
+#define QIB_RUNTIME_SPECIAL_TRIGGER 0x0100
+#define QIB_RUNTIME_SDMA 0x0200
+#define QIB_RUNTIME_FORCE_PIOAVAIL 0x0400
+#define QIB_RUNTIME_PIO_REGSWAPPED 0x0800
+#define QIB_RUNTIME_CTXT_MSB_IN_QP 0x1000
+#define QIB_RUNTIME_CTXT_REDIRECT 0x2000
+#define QIB_RUNTIME_HDRSUPP 0x4000
+
+/*
+ * This structure is returned by qib_userinit() immediately after
+ * open to get implementation-specific info, and info specific to this
+ * instance.
+ *
+ * This struct must have explict pad fields where type sizes
+ * may result in different alignments between 32 and 64 bit
+ * programs, since the 64 bit * bit kernel requires the user code
+ * to have matching offsets
+ */
+struct qib_base_info {
+ /* version of hardware, for feature checking. */
+ __u32 spi_hw_version;
+ /* version of software, for feature checking. */
+ __u32 spi_sw_version;
+ /* QLogic_IB context assigned, goes into sent packets */
+ __u16 spi_ctxt;
+ __u16 spi_subctxt;
+ /*
+ * IB MTU, packets IB data must be less than this.
+ * The MTU is in bytes, and will be a multiple of 4 bytes.
+ */
+ __u32 spi_mtu;
+ /*
+ * Size of a PIO buffer. Any given packet's total size must be less
+ * than this (in words). Included is the starting control word, so
+ * if 513 is returned, then total pkt size is 512 words or less.
+ */
+ __u32 spi_piosize;
+ /* size of the TID cache in qlogic_ib, in entries */
+ __u32 spi_tidcnt;
+ /* size of the TID Eager list in qlogic_ib, in entries */
+ __u32 spi_tidegrcnt;
+ /* size of a single receive header queue entry in words. */
+ __u32 spi_rcvhdrent_size;
+ /*
+ * Count of receive header queue entries allocated.
+ * This may be less than the spu_rcvhdrcnt passed in!.
+ */
+ __u32 spi_rcvhdr_cnt;
+
+ /* per-chip and other runtime features bitmap (QIB_RUNTIME_*) */
+ __u32 spi_runtime_flags;
+
+ /* address where hardware receive header queue is mapped */
+ __u64 spi_rcvhdr_base;
+
+ /* user program. */
+
+ /* base address of eager TID receive buffers used by hardware. */
+ __u64 spi_rcv_egrbufs;
+
+ /* Allocated by initialization code, not by protocol. */
+
+ /*
+ * Size of each TID buffer in host memory, starting at
+ * spi_rcv_egrbufs. The buffers are virtually contiguous.
+ */
+ __u32 spi_rcv_egrbufsize;
+ /*
+ * The special QP (queue pair) value that identifies an qlogic_ib
+ * protocol packet from standard IB packets. More, probably much
+ * more, to be added.
+ */
+ __u32 spi_qpair;
+
+ /*
+ * User register base for init code, not to be used directly by
+ * protocol or applications. Always points to chip registers,
+ * for normal or shared context.
+ */
+ __u64 spi_uregbase;
+ /*
+ * Maximum buffer size in bytes that can be used in a single TID
+ * entry (assuming the buffer is aligned to this boundary). This is
+ * the minimum of what the hardware and software support Guaranteed
+ * to be a power of 2.
+ */
+ __u32 spi_tid_maxsize;
+ /*
+ * alignment of each pio send buffer (byte count
+ * to add to spi_piobufbase to get to second buffer)
+ */
+ __u32 spi_pioalign;
+ /*
+ * The index of the first pio buffer available to this process;
+ * needed to do lookup in spi_pioavailaddr; not added to
+ * spi_piobufbase.
+ */
+ __u32 spi_pioindex;
+ /* number of buffers mapped for this process */
+ __u32 spi_piocnt;
+
+ /*
+ * Base address of writeonly pio buffers for this process.
+ * Each buffer has spi_piosize words, and is aligned on spi_pioalign
+ * boundaries. spi_piocnt buffers are mapped from this address
+ */
+ __u64 spi_piobufbase;
+
+ /*
+ * Base address of readonly memory copy of the pioavail registers.
+ * There are 2 bits for each buffer.
+ */
+ __u64 spi_pioavailaddr;
+
+ /*
+ * Address where driver updates a copy of the interface and driver
+ * status (QIB_STATUS_*) as a 64 bit value. It's followed by a
+ * link status qword (formerly combined with driver status), then a
+ * string indicating hardware error, if there was one.
+ */
+ __u64 spi_status;
+
+ /* number of chip ctxts available to user processes */
+ __u32 spi_nctxts;
+ __u16 spi_unit; /* unit number of chip we are using */
+ __u16 spi_port; /* IB port number we are using */
+ /* num bufs in each contiguous set */
+ __u32 spi_rcv_egrperchunk;
+ /* size in bytes of each contiguous set */
+ __u32 spi_rcv_egrchunksize;
+ /* total size of mmap to cover full rcvegrbuffers */
+ __u32 spi_rcv_egrbuftotlen;
+ __u32 spi_rhf_offset; /* dword offset in hdrqent for rcvhdr flags */
+ /* address of readonly memory copy of the rcvhdrq tail register. */
+ __u64 spi_rcvhdr_tailaddr;
+
+ /*
+ * shared memory pages for subctxts if ctxt is shared; these cover
+ * all the processes in the group sharing a single context.
+ * all have enough space for the num_subcontexts value on this job.
+ */
+ __u64 spi_subctxt_uregbase;
+ __u64 spi_subctxt_rcvegrbuf;
+ __u64 spi_subctxt_rcvhdr_base;
+
+ /* shared memory page for send buffer disarm status */
+ __u64 spi_sendbuf_status;
+} __aligned(8);
+
+/*
+ * This version number is given to the driver by the user code during
+ * initialization in the spu_userversion field of qib_user_info, so
+ * the driver can check for compatibility with user code.
+ *
+ * The major version changes when data structures
+ * change in an incompatible way. The driver must be the same or higher
+ * for initialization to succeed. In some cases, a higher version
+ * driver will not interoperate with older software, and initialization
+ * will return an error.
+ */
+#define QIB_USER_SWMAJOR 1
+
+/*
+ * Minor version differences are always compatible
+ * a within a major version, however if user software is larger
+ * than driver software, some new features and/or structure fields
+ * may not be implemented; the user code must deal with this if it
+ * cares, or it must abort after initialization reports the difference.
+ */
+#define QIB_USER_SWMINOR 13
+
+#define QIB_USER_SWVERSION ((QIB_USER_SWMAJOR << 16) | QIB_USER_SWMINOR)
+
+#ifndef QIB_KERN_TYPE
+#define QIB_KERN_TYPE 0
+#endif
+
+/*
+ * Similarly, this is the kernel version going back to the user. It's
+ * slightly different, in that we want to tell if the driver was built as
+ * part of a QLogic release, or from the driver from openfabrics.org,
+ * kernel.org, or a standard distribution, for support reasons.
+ * The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied.
+ *
+ * It's returned by the driver to the user code during initialization in the
+ * spi_sw_version field of qib_base_info, so the user code can in turn
+ * check for compatibility with the kernel.
+*/
+#define QIB_KERN_SWVERSION ((QIB_KERN_TYPE << 31) | QIB_USER_SWVERSION)
+
+/*
+ * Define the driver version number. This is something that refers only
+ * to the driver itself, not the software interfaces it supports.
+ */
+#define QIB_DRIVER_VERSION_BASE "1.11"
+
+/* create the final driver version string */
+#ifdef QIB_IDSTR
+#define QIB_DRIVER_VERSION QIB_DRIVER_VERSION_BASE " " QIB_IDSTR
+#else
+#define QIB_DRIVER_VERSION QIB_DRIVER_VERSION_BASE
+#endif
+
+/*
+ * If the unit is specified via open, HCA choice is fixed. If port is
+ * specified, it's also fixed. Otherwise we try to spread contexts
+ * across ports and HCAs, using different algorithims. WITHIN is
+ * the old default, prior to this mechanism.
+ */
+#define QIB_PORT_ALG_ACROSS 0 /* round robin contexts across HCAs, then
+ * ports; this is the default */
+#define QIB_PORT_ALG_WITHIN 1 /* use all contexts on an HCA (round robin
+ * active ports within), then next HCA */
+#define QIB_PORT_ALG_COUNT 2 /* number of algorithm choices */
+
+/*
+ * This structure is passed to qib_userinit() to tell the driver where
+ * user code buffers are, sizes, etc. The offsets and sizes of the
+ * fields must remain unchanged, for binary compatibility. It can
+ * be extended, if userversion is changed so user code can tell, if needed
+ */
+struct qib_user_info {
+ /*
+ * version of user software, to detect compatibility issues.
+ * Should be set to QIB_USER_SWVERSION.
+ */
+ __u32 spu_userversion;
+
+ __u32 _spu_unused2;
+
+ /* size of struct base_info to write to */
+ __u32 spu_base_info_size;
+
+ __u32 spu_port_alg; /* which QIB_PORT_ALG_*; unused user minor < 11 */
+
+ /*
+ * If two or more processes wish to share a context, each process
+ * must set the spu_subctxt_cnt and spu_subctxt_id to the same
+ * values. The only restriction on the spu_subctxt_id is that
+ * it be unique for a given node.
+ */
+ __u16 spu_subctxt_cnt;
+ __u16 spu_subctxt_id;
+
+ __u32 spu_port; /* IB port requested by user if > 0 */
+
+ /*
+ * address of struct base_info to write to
+ */
+ __u64 spu_base_info;
+
+} __aligned(8);
+
+/* User commands. */
+
+/* 16 available, was: old set up userspace (for old user code) */
+#define QIB_CMD_CTXT_INFO 17 /* find out what resources we got */
+#define QIB_CMD_RECV_CTRL 18 /* control receipt of packets */
+#define QIB_CMD_TID_UPDATE 19 /* update expected TID entries */
+#define QIB_CMD_TID_FREE 20 /* free expected TID entries */
+#define QIB_CMD_SET_PART_KEY 21 /* add partition key */
+/* 22 available, was: return info on slave processes (for old user code) */
+#define QIB_CMD_ASSIGN_CTXT 23 /* allocate HCA and ctxt */
+#define QIB_CMD_USER_INIT 24 /* set up userspace */
+#define QIB_CMD_UNUSED_1 25
+#define QIB_CMD_UNUSED_2 26
+#define QIB_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */
+#define QIB_CMD_POLL_TYPE 28 /* set the kind of polling we want */
+#define QIB_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */
+/* 30 is unused */
+#define QIB_CMD_SDMA_INFLIGHT 31 /* sdma inflight counter request */
+#define QIB_CMD_SDMA_COMPLETE 32 /* sdma completion counter request */
+/* 33 available, was a testing feature */
+#define QIB_CMD_DISARM_BUFS 34 /* disarm send buffers w/ errors */
+#define QIB_CMD_ACK_EVENT 35 /* ack & clear bits */
+#define QIB_CMD_CPUS_LIST 36 /* list of cpus allocated, for pinned
+ * processes: qib_cpus_list */
+
+/*
+ * QIB_CMD_ACK_EVENT obsoletes QIB_CMD_DISARM_BUFS, but we keep it for
+ * compatibility with libraries from previous release. The ACK_EVENT
+ * will take appropriate driver action (if any, just DISARM for now),
+ * then clear the bits passed in as part of the mask. These bits are
+ * in the first 64bit word at spi_sendbuf_status, and are passed to
+ * the driver in the event_mask union as well.
+ */
+#define _QIB_EVENT_DISARM_BUFS_BIT 0
+#define _QIB_EVENT_LINKDOWN_BIT 1
+#define _QIB_EVENT_LID_CHANGE_BIT 2
+#define _QIB_EVENT_LMC_CHANGE_BIT 3
+#define _QIB_EVENT_SL2VL_CHANGE_BIT 4
+#define _QIB_MAX_EVENT_BIT _QIB_EVENT_SL2VL_CHANGE_BIT
+
+#define QIB_EVENT_DISARM_BUFS_BIT (1UL << _QIB_EVENT_DISARM_BUFS_BIT)
+#define QIB_EVENT_LINKDOWN_BIT (1UL << _QIB_EVENT_LINKDOWN_BIT)
+#define QIB_EVENT_LID_CHANGE_BIT (1UL << _QIB_EVENT_LID_CHANGE_BIT)
+#define QIB_EVENT_LMC_CHANGE_BIT (1UL << _QIB_EVENT_LMC_CHANGE_BIT)
+#define QIB_EVENT_SL2VL_CHANGE_BIT (1UL << _QIB_EVENT_SL2VL_CHANGE_BIT)
+
+
+/*
+ * Poll types
+ */
+#define QIB_POLL_TYPE_ANYRCV 0x0
+#define QIB_POLL_TYPE_URGENT 0x1
+
+struct qib_ctxt_info {
+ __u16 num_active; /* number of active units */
+ __u16 unit; /* unit (chip) assigned to caller */
+ __u16 port; /* IB port assigned to caller (1-based) */
+ __u16 ctxt; /* ctxt on unit assigned to caller */
+ __u16 subctxt; /* subctxt on unit assigned to caller */
+ __u16 num_ctxts; /* number of ctxts available on unit */
+ __u16 num_subctxts; /* number of subctxts opened on ctxt */
+ __u16 rec_cpu; /* cpu # for affinity (ffff if none) */
+};
+
+struct qib_tid_info {
+ __u32 tidcnt;
+ /* make structure same size in 32 and 64 bit */
+ __u32 tid__unused;
+ /* virtual address of first page in transfer */
+ __u64 tidvaddr;
+ /* pointer (same size 32/64 bit) to __u16 tid array */
+ __u64 tidlist;
+
+ /*
+ * pointer (same size 32/64 bit) to bitmap of TIDs used
+ * for this call; checked for being large enough at open
+ */
+ __u64 tidmap;
+};
+
+struct qib_cmd {
+ __u32 type; /* command type */
+ union {
+ struct qib_tid_info tid_info;
+ struct qib_user_info user_info;
+
+ /*
+ * address in userspace where we should put the sdma
+ * inflight counter
+ */
+ __u64 sdma_inflight;
+ /*
+ * address in userspace where we should put the sdma
+ * completion counter
+ */
+ __u64 sdma_complete;
+ /* address in userspace of struct qib_ctxt_info to
+ write result to */
+ __u64 ctxt_info;
+ /* enable/disable receipt of packets */
+ __u32 recv_ctrl;
+ /* enable/disable armlaunch errors (non-zero to enable) */
+ __u32 armlaunch_ctrl;
+ /* partition key to set */
+ __u16 part_key;
+ /* user address of __u32 bitmask of active slaves */
+ __u64 slave_mask_addr;
+ /* type of polling we want */
+ __u16 poll_type;
+ /* back pressure enable bit for one particular context */
+ __u8 ctxt_bp;
+ /* qib_user_event_ack(), IPATH_EVENT_* bits */
+ __u64 event_mask;
+ } cmd;
+};
+
+struct qib_iovec {
+ /* Pointer to data, but same size 32 and 64 bit */
+ __u64 iov_base;
+
+ /*
+ * Length of data; don't need 64 bits, but want
+ * qib_sendpkt to remain same size as before 32 bit changes, so...
+ */
+ __u64 iov_len;
+};
+
+/*
+ * Describes a single packet for send. Each packet can have one or more
+ * buffers, but the total length (exclusive of IB headers) must be less
+ * than the MTU, and if using the PIO method, entire packet length,
+ * including IB headers, must be less than the qib_piosize value (words).
+ * Use of this necessitates including sys/uio.h
+ */
+struct __qib_sendpkt {
+ __u32 sps_flags; /* flags for packet (TBD) */
+ __u32 sps_cnt; /* number of entries to use in sps_iov */
+ /* array of iov's describing packet. TEMPORARY */
+ struct qib_iovec sps_iov[4];
+};
+
+/*
+ * Diagnostics can send a packet by "writing" the following
+ * structs to the diag data special file.
+ * This allows a custom
+ * pbc (+ static rate) qword, so that special modes and deliberate
+ * changes to CRCs can be used. The elements were also re-ordered
+ * for better alignment and to avoid padding issues.
+ */
+#define _DIAG_XPKT_VERS 3
+struct qib_diag_xpkt {
+ __u16 version;
+ __u16 unit;
+ __u16 port;
+ __u16 len;
+ __u64 data;
+ __u64 pbc_wd;
+};
+
+/*
+ * Data layout in I2C flash (for GUID, etc.)
+ * All fields are little-endian binary unless otherwise stated
+ */
+#define QIB_FLASH_VERSION 2
+struct qib_flash {
+ /* flash layout version (QIB_FLASH_VERSION) */
+ __u8 if_fversion;
+ /* checksum protecting if_length bytes */
+ __u8 if_csum;
+ /*
+ * valid length (in use, protected by if_csum), including
+ * if_fversion and if_csum themselves)
+ */
+ __u8 if_length;
+ /* the GUID, in network order */
+ __u8 if_guid[8];
+ /* number of GUIDs to use, starting from if_guid */
+ __u8 if_numguid;
+ /* the (last 10 characters of) board serial number, in ASCII */
+ char if_serial[12];
+ /* board mfg date (YYYYMMDD ASCII) */
+ char if_mfgdate[8];
+ /* last board rework/test date (YYYYMMDD ASCII) */
+ char if_testdate[8];
+ /* logging of error counts, TBD */
+ __u8 if_errcntp[4];
+ /* powered on hours, updated at driver unload */
+ __u8 if_powerhour[2];
+ /* ASCII free-form comment field */
+ char if_comment[32];
+ /* Backwards compatible prefix for longer QLogic Serial Numbers */
+ char if_sprefix[4];
+ /* 82 bytes used, min flash size is 128 bytes */
+ __u8 if_future[46];
+};
+
+/*
+ * These are the counters implemented in the chip, and are listed in order.
+ * The InterCaps naming is taken straight from the chip spec.
+ */
+struct qlogic_ib_counters {
+ __u64 LBIntCnt;
+ __u64 LBFlowStallCnt;
+ __u64 TxSDmaDescCnt; /* was Reserved1 */
+ __u64 TxUnsupVLErrCnt;
+ __u64 TxDataPktCnt;
+ __u64 TxFlowPktCnt;
+ __u64 TxDwordCnt;
+ __u64 TxLenErrCnt;
+ __u64 TxMaxMinLenErrCnt;
+ __u64 TxUnderrunCnt;
+ __u64 TxFlowStallCnt;
+ __u64 TxDroppedPktCnt;
+ __u64 RxDroppedPktCnt;
+ __u64 RxDataPktCnt;
+ __u64 RxFlowPktCnt;
+ __u64 RxDwordCnt;
+ __u64 RxLenErrCnt;
+ __u64 RxMaxMinLenErrCnt;
+ __u64 RxICRCErrCnt;
+ __u64 RxVCRCErrCnt;
+ __u64 RxFlowCtrlErrCnt;
+ __u64 RxBadFormatCnt;
+ __u64 RxLinkProblemCnt;
+ __u64 RxEBPCnt;
+ __u64 RxLPCRCErrCnt;
+ __u64 RxBufOvflCnt;
+ __u64 RxTIDFullErrCnt;
+ __u64 RxTIDValidErrCnt;
+ __u64 RxPKeyMismatchCnt;
+ __u64 RxP0HdrEgrOvflCnt;
+ __u64 RxP1HdrEgrOvflCnt;
+ __u64 RxP2HdrEgrOvflCnt;
+ __u64 RxP3HdrEgrOvflCnt;
+ __u64 RxP4HdrEgrOvflCnt;
+ __u64 RxP5HdrEgrOvflCnt;
+ __u64 RxP6HdrEgrOvflCnt;
+ __u64 RxP7HdrEgrOvflCnt;
+ __u64 RxP8HdrEgrOvflCnt;
+ __u64 RxP9HdrEgrOvflCnt;
+ __u64 RxP10HdrEgrOvflCnt;
+ __u64 RxP11HdrEgrOvflCnt;
+ __u64 RxP12HdrEgrOvflCnt;
+ __u64 RxP13HdrEgrOvflCnt;
+ __u64 RxP14HdrEgrOvflCnt;
+ __u64 RxP15HdrEgrOvflCnt;
+ __u64 RxP16HdrEgrOvflCnt;
+ __u64 IBStatusChangeCnt;
+ __u64 IBLinkErrRecoveryCnt;
+ __u64 IBLinkDownedCnt;
+ __u64 IBSymbolErrCnt;
+ __u64 RxVL15DroppedPktCnt;
+ __u64 RxOtherLocalPhyErrCnt;
+ __u64 PcieRetryBufDiagQwordCnt;
+ __u64 ExcessBufferOvflCnt;
+ __u64 LocalLinkIntegrityErrCnt;
+ __u64 RxVlErrCnt;
+ __u64 RxDlidFltrCnt;
+};
+
+/*
+ * The next set of defines are for packet headers, and chip register
+ * and memory bits that are visible to and/or used by user-mode software.
+ */
+
+/* RcvHdrFlags bits */
+#define QLOGIC_IB_RHF_LENGTH_MASK 0x7FF
+#define QLOGIC_IB_RHF_LENGTH_SHIFT 0
+#define QLOGIC_IB_RHF_RCVTYPE_MASK 0x7
+#define QLOGIC_IB_RHF_RCVTYPE_SHIFT 11
+#define QLOGIC_IB_RHF_EGRINDEX_MASK 0xFFF
+#define QLOGIC_IB_RHF_EGRINDEX_SHIFT 16
+#define QLOGIC_IB_RHF_SEQ_MASK 0xF
+#define QLOGIC_IB_RHF_SEQ_SHIFT 0
+#define QLOGIC_IB_RHF_HDRQ_OFFSET_MASK 0x7FF
+#define QLOGIC_IB_RHF_HDRQ_OFFSET_SHIFT 4
+#define QLOGIC_IB_RHF_H_ICRCERR 0x80000000
+#define QLOGIC_IB_RHF_H_VCRCERR 0x40000000
+#define QLOGIC_IB_RHF_H_PARITYERR 0x20000000
+#define QLOGIC_IB_RHF_H_LENERR 0x10000000
+#define QLOGIC_IB_RHF_H_MTUERR 0x08000000
+#define QLOGIC_IB_RHF_H_IHDRERR 0x04000000
+#define QLOGIC_IB_RHF_H_TIDERR 0x02000000
+#define QLOGIC_IB_RHF_H_MKERR 0x01000000
+#define QLOGIC_IB_RHF_H_IBERR 0x00800000
+#define QLOGIC_IB_RHF_H_ERR_MASK 0xFF800000
+#define QLOGIC_IB_RHF_L_USE_EGR 0x80000000
+#define QLOGIC_IB_RHF_L_SWA 0x00008000
+#define QLOGIC_IB_RHF_L_SWB 0x00004000
+
+/* qlogic_ib header fields */
+#define QLOGIC_IB_I_VERS_MASK 0xF
+#define QLOGIC_IB_I_VERS_SHIFT 28
+#define QLOGIC_IB_I_CTXT_MASK 0xF
+#define QLOGIC_IB_I_CTXT_SHIFT 24
+#define QLOGIC_IB_I_TID_MASK 0x7FF
+#define QLOGIC_IB_I_TID_SHIFT 13
+#define QLOGIC_IB_I_OFFSET_MASK 0x1FFF
+#define QLOGIC_IB_I_OFFSET_SHIFT 0
+
+/* K_PktFlags bits */
+#define QLOGIC_IB_KPF_INTR 0x1
+#define QLOGIC_IB_KPF_SUBCTXT_MASK 0x3
+#define QLOGIC_IB_KPF_SUBCTXT_SHIFT 1
+
+#define QLOGIC_IB_MAX_SUBCTXT 4
+
+/* SendPIO per-buffer control */
+#define QLOGIC_IB_SP_TEST 0x40
+#define QLOGIC_IB_SP_TESTEBP 0x20
+#define QLOGIC_IB_SP_TRIGGER_SHIFT 15
+
+/* SendPIOAvail bits */
+#define QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT 1
+#define QLOGIC_IB_SENDPIOAVAIL_CHECK_SHIFT 0
+
+/* qlogic_ib header format */
+struct qib_header {
+ /*
+ * Version - 4 bits, Context - 4 bits, TID - 10 bits and Offset -
+ * 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
+ * Context 4, TID 11, offset 13.
+ */
+ __le32 ver_ctxt_tid_offset;
+ __le16 chksum;
+ __le16 pkt_flags;
+};
+
+/*
+ * qlogic_ib user message header format.
+ * This structure contains the first 4 fields common to all protocols
+ * that employ qlogic_ib.
+ */
+struct qib_message_header {
+ __be16 lrh[4];
+ __be32 bth[3];
+ /* fields below this point are in host byte order */
+ struct qib_header iph;
+ /* fields below are simplified, but should match PSM */
+ /* some are accessed by driver when packet spliting is needed */
+ __u8 sub_opcode;
+ __u8 flags;
+ __u16 commidx;
+ __u32 ack_seq_num;
+ __u8 flowid;
+ __u8 hdr_dlen;
+ __u16 mqhdr;
+ __u32 uwords[4];
+};
+
+/* sequence number bits for message */
+union qib_seqnum {
+ struct {
+ __u32 seq:11;
+ __u32 gen:8;
+ __u32 flow:5;
+ };
+ struct {
+ __u32 pkt:16;
+ __u32 msg:8;
+ };
+ __u32 val;
+};
+
+/* qib receiving-dma tid-session-member */
+struct qib_tid_session_member {
+ __u16 tid;
+ __u16 offset;
+ __u16 length;
+};
+
+/* IB - LRH header consts */
+#define QIB_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
+#define QIB_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
+
+/* misc. */
+#define SIZE_OF_CRC 1
+
+#define QIB_DEFAULT_P_KEY 0xFFFF
+#define QIB_PERMISSIVE_LID 0xFFFF
+#define QIB_AETH_CREDIT_SHIFT 24
+#define QIB_AETH_CREDIT_MASK 0x1F
+#define QIB_AETH_CREDIT_INVAL 0x1F
+#define QIB_PSN_MASK 0xFFFFFF
+#define QIB_MSN_MASK 0xFFFFFF
+#define QIB_QPN_MASK 0xFFFFFF
+#define QIB_MULTICAST_LID_BASE 0xC000
+#define QIB_EAGER_TID_ID QLOGIC_IB_I_TID_MASK
+#define QIB_MULTICAST_QPN 0xFFFFFF
+
+/* Receive Header Queue: receive type (from qlogic_ib) */
+#define RCVHQ_RCV_TYPE_EXPECTED 0
+#define RCVHQ_RCV_TYPE_EAGER 1
+#define RCVHQ_RCV_TYPE_NON_KD 2
+#define RCVHQ_RCV_TYPE_ERROR 3
+
+#define QIB_HEADER_QUEUE_WORDS 9
+
+/* functions for extracting fields from rcvhdrq entries for the driver.
+ */
+static inline __u32 qib_hdrget_err_flags(const __le32 *rbuf)
+{
+ return __le32_to_cpu(rbuf[1]) & QLOGIC_IB_RHF_H_ERR_MASK;
+}
+
+static inline __u32 qib_hdrget_rcv_type(const __le32 *rbuf)
+{
+ return (__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_RCVTYPE_SHIFT) &
+ QLOGIC_IB_RHF_RCVTYPE_MASK;
+}
+
+static inline __u32 qib_hdrget_length_in_bytes(const __le32 *rbuf)
+{
+ return ((__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_LENGTH_SHIFT) &
+ QLOGIC_IB_RHF_LENGTH_MASK) << 2;
+}
+
+static inline __u32 qib_hdrget_index(const __le32 *rbuf)
+{
+ return (__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_EGRINDEX_SHIFT) &
+ QLOGIC_IB_RHF_EGRINDEX_MASK;
+}
+
+static inline __u32 qib_hdrget_seq(const __le32 *rbuf)
+{
+ return (__le32_to_cpu(rbuf[1]) >> QLOGIC_IB_RHF_SEQ_SHIFT) &
+ QLOGIC_IB_RHF_SEQ_MASK;
+}
+
+static inline __u32 qib_hdrget_offset(const __le32 *rbuf)
+{
+ return (__le32_to_cpu(rbuf[1]) >> QLOGIC_IB_RHF_HDRQ_OFFSET_SHIFT) &
+ QLOGIC_IB_RHF_HDRQ_OFFSET_MASK;
+}
+
+static inline __u32 qib_hdrget_use_egr_buf(const __le32 *rbuf)
+{
+ return __le32_to_cpu(rbuf[0]) & QLOGIC_IB_RHF_L_USE_EGR;
+}
+
+static inline __u32 qib_hdrget_qib_ver(__le32 hdrword)
+{
+ return (__le32_to_cpu(hdrword) >> QLOGIC_IB_I_VERS_SHIFT) &
+ QLOGIC_IB_I_VERS_MASK;
+}
+
+#endif /* _QIB_COMMON_H */
Code Review / kvmfornfv.git / blobdiff