+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/moduleparam.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/vmalloc.h>
-
-#include "ipath_kernel.h"
-#include "ipath_common.h"
-
-/*
- * min buffers we want to have per port, after driver
- */
-#define IPATH_MIN_USER_PORT_BUFCNT 7
-
-/*
- * Number of ports we are configured to use (to allow for more pio
- * buffers per port, etc.) Zero means use chip value.
- */
-static ushort ipath_cfgports;
-
-module_param_named(cfgports, ipath_cfgports, ushort, S_IRUGO);
-MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
-
-/*
- * Number of buffers reserved for driver (verbs and layered drivers.)
- * Initialized based on number of PIO buffers if not set via module interface.
- * The problem with this is that it's global, but we'll use different
- * numbers for different chip types.
- */
-static ushort ipath_kpiobufs;
-
-static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
-
-module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
- &ipath_kpiobufs, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
-
-/**
- * create_port0_egr - allocate the eager TID buffers
- * @dd: the infinipath device
- *
- * This code is now quite different for user and kernel, because
- * the kernel uses skb's, for the accelerated network performance.
- * This is the kernel (port0) version.
- *
- * Allocate the eager TID buffers and program them into infinipath.
- * We use the network layer alloc_skb() allocator to allocate the
- * memory, and either use the buffers as is for things like verbs
- * packets, or pass the buffers up to the ipath layered driver and
- * thence the network layer, replacing them as we do so (see
- * ipath_rcv_layer()).
- */
-static int create_port0_egr(struct ipath_devdata *dd)
-{
- unsigned e, egrcnt;
- struct ipath_skbinfo *skbinfo;
- int ret;
-
- egrcnt = dd->ipath_p0_rcvegrcnt;
-
- skbinfo = vmalloc(sizeof(*dd->ipath_port0_skbinfo) * egrcnt);
- if (skbinfo == NULL) {
- ipath_dev_err(dd, "allocation error for eager TID "
- "skb array\n");
- ret = -ENOMEM;
- goto bail;
- }
- for (e = 0; e < egrcnt; e++) {
- /*
- * This is a bit tricky in that we allocate extra
- * space for 2 bytes of the 14 byte ethernet header.
- * These two bytes are passed in the ipath header so
- * the rest of the data is word aligned. We allocate
- * 4 bytes so that the data buffer stays word aligned.
- * See ipath_kreceive() for more details.
- */
- skbinfo[e].skb = ipath_alloc_skb(dd, GFP_KERNEL);
- if (!skbinfo[e].skb) {
- ipath_dev_err(dd, "SKB allocation error for "
- "eager TID %u\n", e);
- while (e != 0)
- dev_kfree_skb(skbinfo[--e].skb);
- vfree(skbinfo);
- ret = -ENOMEM;
- goto bail;
- }
- }
- /*
- * After loop above, so we can test non-NULL to see if ready
- * to use at receive, etc.
- */
- dd->ipath_port0_skbinfo = skbinfo;
-
- for (e = 0; e < egrcnt; e++) {
- dd->ipath_port0_skbinfo[e].phys =
- ipath_map_single(dd->pcidev,
- dd->ipath_port0_skbinfo[e].skb->data,
- dd->ipath_ibmaxlen, PCI_DMA_FROMDEVICE);
- dd->ipath_f_put_tid(dd, e + (u64 __iomem *)
- ((char __iomem *) dd->ipath_kregbase +
- dd->ipath_rcvegrbase),
- RCVHQ_RCV_TYPE_EAGER,
- dd->ipath_port0_skbinfo[e].phys);
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-static int bringup_link(struct ipath_devdata *dd)
-{
- u64 val, ibc;
- int ret = 0;
-
- /* hold IBC in reset */
- dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
-
- /*
- * set initial max size pkt IBC will send, including ICRC; it's the
- * PIO buffer size in dwords, less 1; also see ipath_set_mtu()
- */
- val = (dd->ipath_ibmaxlen >> 2) + 1;
- ibc = val << dd->ibcc_mpl_shift;
-
- /* flowcontrolwatermark is in units of KBytes */
- ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT;
- /*
- * How often flowctrl sent. More or less in usecs; balance against
- * watermark value, so that in theory senders always get a flow
- * control update in time to not let the IB link go idle.
- */
- ibc |= 0x3ULL << INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT;
- /* max error tolerance */
- ibc |= 0xfULL << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
- /* use "real" buffer space for */
- ibc |= 4ULL << INFINIPATH_IBCC_CREDITSCALE_SHIFT;
- /* IB credit flow control. */
- ibc |= 0xfULL << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
- /* initially come up waiting for TS1, without sending anything. */
- dd->ipath_ibcctrl = ibc;
- /*
- * Want to start out with both LINKCMD and LINKINITCMD in NOP
- * (0 and 0). Don't put linkinitcmd in ipath_ibcctrl, want that
- * to stay a NOP. Flag that we are disabled, for the (unlikely)
- * case that some recovery path is trying to bring the link up
- * before we are ready.
- */
- ibc |= INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
- INFINIPATH_IBCC_LINKINITCMD_SHIFT;
- dd->ipath_flags |= IPATH_IB_LINK_DISABLED;
- ipath_cdbg(VERBOSE, "Writing 0x%llx to ibcctrl\n",
- (unsigned long long) ibc);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, ibc);
-
- // be sure chip saw it
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
-
- ret = dd->ipath_f_bringup_serdes(dd);
-
- if (ret)
- dev_info(&dd->pcidev->dev, "Could not initialize SerDes, "
- "not usable\n");
- else {
- /* enable IBC */
- dd->ipath_control |= INFINIPATH_C_LINKENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
- }
-
- return ret;
-}
-
-static struct ipath_portdata *create_portdata0(struct ipath_devdata *dd)
-{
- struct ipath_portdata *pd = NULL;
-
- pd = kzalloc(sizeof(*pd), GFP_KERNEL);
- if (pd) {
- pd->port_dd = dd;
- pd->port_cnt = 1;
- /* The port 0 pkey table is used by the layer interface. */
- pd->port_pkeys[0] = IPATH_DEFAULT_P_KEY;
- pd->port_seq_cnt = 1;
- }
- return pd;
-}
-
-static int init_chip_first(struct ipath_devdata *dd)
-{
- struct ipath_portdata *pd;
- int ret = 0;
- u64 val;
-
- spin_lock_init(&dd->ipath_kernel_tid_lock);
- spin_lock_init(&dd->ipath_user_tid_lock);
- spin_lock_init(&dd->ipath_sendctrl_lock);
- spin_lock_init(&dd->ipath_uctxt_lock);
- spin_lock_init(&dd->ipath_sdma_lock);
- spin_lock_init(&dd->ipath_gpio_lock);
- spin_lock_init(&dd->ipath_eep_st_lock);
- spin_lock_init(&dd->ipath_sdepb_lock);
- mutex_init(&dd->ipath_eep_lock);
-
- /*
- * skip cfgports stuff because we are not allocating memory,
- * and we don't want problems if the portcnt changed due to
- * cfgports. We do still check and report a difference, if
- * not same (should be impossible).
- */
- dd->ipath_f_config_ports(dd, ipath_cfgports);
- if (!ipath_cfgports)
- dd->ipath_cfgports = dd->ipath_portcnt;
- else if (ipath_cfgports <= dd->ipath_portcnt) {
- dd->ipath_cfgports = ipath_cfgports;
- ipath_dbg("Configured to use %u ports out of %u in chip\n",
- dd->ipath_cfgports, ipath_read_kreg32(dd,
- dd->ipath_kregs->kr_portcnt));
- } else {
- dd->ipath_cfgports = dd->ipath_portcnt;
- ipath_dbg("Tried to configured to use %u ports; chip "
- "only supports %u\n", ipath_cfgports,
- ipath_read_kreg32(dd,
- dd->ipath_kregs->kr_portcnt));
- }
- /*
- * Allocate full portcnt array, rather than just cfgports, because
- * cleanup iterates across all possible ports.
- */
- dd->ipath_pd = kzalloc(sizeof(*dd->ipath_pd) * dd->ipath_portcnt,
- GFP_KERNEL);
-
- if (!dd->ipath_pd) {
- ipath_dev_err(dd, "Unable to allocate portdata array, "
- "failing\n");
- ret = -ENOMEM;
- goto done;
- }
-
- pd = create_portdata0(dd);
- if (!pd) {
- ipath_dev_err(dd, "Unable to allocate portdata for port "
- "0, failing\n");
- ret = -ENOMEM;
- goto done;
- }
- dd->ipath_pd[0] = pd;
-
- dd->ipath_rcvtidcnt =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
- dd->ipath_rcvtidbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
- dd->ipath_rcvegrcnt =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
- dd->ipath_rcvegrbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
- dd->ipath_palign =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
- dd->ipath_piobufbase =
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufbase);
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize);
- dd->ipath_piosize2k = val & ~0U;
- dd->ipath_piosize4k = val >> 32;
- if (dd->ipath_piosize4k == 0 && ipath_mtu4096)
- ipath_mtu4096 = 0; /* 4KB not supported by this chip */
- dd->ipath_ibmtu = ipath_mtu4096 ? 4096 : 2048;
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt);
- dd->ipath_piobcnt2k = val & ~0U;
- dd->ipath_piobcnt4k = val >> 32;
- dd->ipath_pio2kbase =
- (u32 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
- (dd->ipath_piobufbase & 0xffffffff));
- if (dd->ipath_piobcnt4k) {
- dd->ipath_pio4kbase = (u32 __iomem *)
- (((char __iomem *) dd->ipath_kregbase) +
- (dd->ipath_piobufbase >> 32));
- /*
- * 4K buffers take 2 pages; we use roundup just to be
- * paranoid; we calculate it once here, rather than on
- * ever buf allocate
- */
- dd->ipath_4kalign = ALIGN(dd->ipath_piosize4k,
- dd->ipath_palign);
- ipath_dbg("%u 2k(%x) piobufs @ %p, %u 4k(%x) @ %p "
- "(%x aligned)\n",
- dd->ipath_piobcnt2k, dd->ipath_piosize2k,
- dd->ipath_pio2kbase, dd->ipath_piobcnt4k,
- dd->ipath_piosize4k, dd->ipath_pio4kbase,
- dd->ipath_4kalign);
- }
- else ipath_dbg("%u 2k piobufs @ %p\n",
- dd->ipath_piobcnt2k, dd->ipath_pio2kbase);
-
-done:
- return ret;
-}
-
-/**
- * init_chip_reset - re-initialize after a reset, or enable
- * @dd: the infinipath device
- *
- * sanity check at least some of the values after reset, and
- * ensure no receive or transmit (explicitly, in case reset
- * failed
- */
-static int init_chip_reset(struct ipath_devdata *dd)
-{
- u32 rtmp;
- int i;
- unsigned long flags;
-
- /*
- * ensure chip does no sends or receives, tail updates, or
- * pioavail updates while we re-initialize
- */
- dd->ipath_rcvctrl &= ~(1ULL << dd->ipath_r_tailupd_shift);
- for (i = 0; i < dd->ipath_portcnt; i++) {
- clear_bit(dd->ipath_r_portenable_shift + i,
- &dd->ipath_rcvctrl);
- clear_bit(dd->ipath_r_intravail_shift + i,
- &dd->ipath_rcvctrl);
- }
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl = 0U; /* no sdma, etc */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
-
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
- if (rtmp != dd->ipath_rcvtidcnt)
- dev_info(&dd->pcidev->dev, "tidcnt was %u before "
- "reset, now %u, using original\n",
- dd->ipath_rcvtidcnt, rtmp);
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
- if (rtmp != dd->ipath_rcvtidbase)
- dev_info(&dd->pcidev->dev, "tidbase was %u before "
- "reset, now %u, using original\n",
- dd->ipath_rcvtidbase, rtmp);
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
- if (rtmp != dd->ipath_rcvegrcnt)
- dev_info(&dd->pcidev->dev, "egrcnt was %u before "
- "reset, now %u, using original\n",
- dd->ipath_rcvegrcnt, rtmp);
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
- if (rtmp != dd->ipath_rcvegrbase)
- dev_info(&dd->pcidev->dev, "egrbase was %u before "
- "reset, now %u, using original\n",
- dd->ipath_rcvegrbase, rtmp);
-
- return 0;
-}
-
-static int init_pioavailregs(struct ipath_devdata *dd)
-{
- int ret;
-
- dd->ipath_pioavailregs_dma = dma_alloc_coherent(
- &dd->pcidev->dev, PAGE_SIZE, &dd->ipath_pioavailregs_phys,
- GFP_KERNEL);
- if (!dd->ipath_pioavailregs_dma) {
- ipath_dev_err(dd, "failed to allocate PIOavail reg area "
- "in memory\n");
- ret = -ENOMEM;
- goto done;
- }
-
- /*
- * we really want L2 cache aligned, but for current CPUs of
- * interest, they are the same.
- */
- dd->ipath_statusp = (u64 *)
- ((char *)dd->ipath_pioavailregs_dma +
- ((2 * L1_CACHE_BYTES +
- dd->ipath_pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES));
- /* copy the current value now that it's really allocated */
- *dd->ipath_statusp = dd->_ipath_status;
- /*
- * setup buffer to hold freeze msg, accessible to apps,
- * following statusp
- */
- dd->ipath_freezemsg = (char *)&dd->ipath_statusp[1];
- /* and its length */
- dd->ipath_freezelen = L1_CACHE_BYTES - sizeof(dd->ipath_statusp[0]);
-
- ret = 0;
-
-done:
- return ret;
-}
-
-/**
- * init_shadow_tids - allocate the shadow TID array
- * @dd: the infinipath device
- *
- * allocate the shadow TID array, so we can ipath_munlock previous
- * entries. It may make more sense to move the pageshadow to the
- * port data structure, so we only allocate memory for ports actually
- * in use, since we at 8k per port, now.
- */
-static void init_shadow_tids(struct ipath_devdata *dd)
-{
- struct page **pages;
- dma_addr_t *addrs;
-
- pages = vzalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
- sizeof(struct page *));
- if (!pages) {
- ipath_dev_err(dd, "failed to allocate shadow page * "
- "array, no expected sends!\n");
- dd->ipath_pageshadow = NULL;
- return;
- }
-
- addrs = vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
- sizeof(dma_addr_t));
- if (!addrs) {
- ipath_dev_err(dd, "failed to allocate shadow dma handle "
- "array, no expected sends!\n");
- vfree(pages);
- dd->ipath_pageshadow = NULL;
- return;
- }
-
- dd->ipath_pageshadow = pages;
- dd->ipath_physshadow = addrs;
-}
-
-static void enable_chip(struct ipath_devdata *dd, int reinit)
-{
- u32 val;
- u64 rcvmask;
- unsigned long flags;
- int i;
-
- if (!reinit)
- init_waitqueue_head(&ipath_state_wait);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- /* Enable PIO send, and update of PIOavail regs to memory. */
- dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE |
- INFINIPATH_S_PIOBUFAVAILUPD;
-
- /*
- * Set the PIO avail update threshold to host memory
- * on chips that support it.
- */
- if (dd->ipath_pioupd_thresh)
- dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
- << INFINIPATH_S_UPDTHRESH_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /*
- * Enable kernel ports' receive and receive interrupt.
- * Other ports done as user opens and inits them.
- */
- rcvmask = 1ULL;
- dd->ipath_rcvctrl |= (rcvmask << dd->ipath_r_portenable_shift) |
- (rcvmask << dd->ipath_r_intravail_shift);
- if (!(dd->ipath_flags & IPATH_NODMA_RTAIL))
- dd->ipath_rcvctrl |= (1ULL << dd->ipath_r_tailupd_shift);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- /*
- * now ready for use. this should be cleared whenever we
- * detect a reset, or initiate one.
- */
- dd->ipath_flags |= IPATH_INITTED;
-
- /*
- * Init our shadow copies of head from tail values,
- * and write head values to match.
- */
- val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0);
- ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
-
- /* Initialize so we interrupt on next packet received */
- ipath_write_ureg(dd, ur_rcvhdrhead,
- dd->ipath_rhdrhead_intr_off |
- dd->ipath_pd[0]->port_head, 0);
-
- /*
- * by now pioavail updates to memory should have occurred, so
- * copy them into our working/shadow registers; this is in
- * case something went wrong with abort, but mostly to get the
- * initial values of the generation bit correct.
- */
- for (i = 0; i < dd->ipath_pioavregs; i++) {
- __le64 pioavail;
-
- /*
- * Chip Errata bug 6641; even and odd qwords>3 are swapped.
- */
- if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS))
- pioavail = dd->ipath_pioavailregs_dma[i ^ 1];
- else
- pioavail = dd->ipath_pioavailregs_dma[i];
- /*
- * don't need to worry about ipath_pioavailkernel here
- * because we will call ipath_chg_pioavailkernel() later
- * in initialization, to busy out buffers as needed
- */
- dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail);
- }
- /* can get counters, stats, etc. */
- dd->ipath_flags |= IPATH_PRESENT;
-}
-
-static int init_housekeeping(struct ipath_devdata *dd, int reinit)
-{
- char boardn[40];
- int ret = 0;
-
- /*
- * have to clear shadow copies of registers at init that are
- * not otherwise set here, or all kinds of bizarre things
- * happen with driver on chip reset
- */
- dd->ipath_rcvhdrsize = 0;
-
- /*
- * Don't clear ipath_flags as 8bit mode was set before
- * entering this func. However, we do set the linkstate to
- * unknown, so we can watch for a transition.
- * PRESENT is set because we want register reads to work,
- * and the kernel infrastructure saw it in config space;
- * We clear it if we have failures.
- */
- dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
- dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
- IPATH_LINKDOWN | IPATH_LINKINIT);
-
- ipath_cdbg(VERBOSE, "Try to read spc chip revision\n");
- dd->ipath_revision =
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
-
- /*
- * set up fundamental info we need to use the chip; we assume
- * if the revision reg and these regs are OK, we don't need to
- * special case the rest
- */
- dd->ipath_sregbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_sendregbase);
- dd->ipath_cregbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_counterregbase);
- dd->ipath_uregbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_userregbase);
- ipath_cdbg(VERBOSE, "ipath_kregbase %p, sendbase %x usrbase %x, "
- "cntrbase %x\n", dd->ipath_kregbase, dd->ipath_sregbase,
- dd->ipath_uregbase, dd->ipath_cregbase);
- if ((dd->ipath_revision & 0xffffffff) == 0xffffffff
- || (dd->ipath_sregbase & 0xffffffff) == 0xffffffff
- || (dd->ipath_cregbase & 0xffffffff) == 0xffffffff
- || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
- ipath_dev_err(dd, "Register read failures from chip, "
- "giving up initialization\n");
- dd->ipath_flags &= ~IPATH_PRESENT;
- ret = -ENODEV;
- goto done;
- }
-
-
- /* clear diagctrl register, in case diags were running and crashed */
- ipath_write_kreg (dd, dd->ipath_kregs->kr_hwdiagctrl, 0);
-
- /* clear the initial reset flag, in case first driver load */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
- INFINIPATH_E_RESET);
-
- ipath_cdbg(VERBOSE, "Revision %llx (PCI %x)\n",
- (unsigned long long) dd->ipath_revision,
- dd->ipath_pcirev);
-
- if (((dd->ipath_revision >> INFINIPATH_R_SOFTWARE_SHIFT) &
- INFINIPATH_R_SOFTWARE_MASK) != IPATH_CHIP_SWVERSION) {
- ipath_dev_err(dd, "Driver only handles version %d, "
- "chip swversion is %d (%llx), failng\n",
- IPATH_CHIP_SWVERSION,
- (int)(dd->ipath_revision >>
- INFINIPATH_R_SOFTWARE_SHIFT) &
- INFINIPATH_R_SOFTWARE_MASK,
- (unsigned long long) dd->ipath_revision);
- ret = -ENOSYS;
- goto done;
- }
- dd->ipath_majrev = (u8) ((dd->ipath_revision >>
- INFINIPATH_R_CHIPREVMAJOR_SHIFT) &
- INFINIPATH_R_CHIPREVMAJOR_MASK);
- dd->ipath_minrev = (u8) ((dd->ipath_revision >>
- INFINIPATH_R_CHIPREVMINOR_SHIFT) &
- INFINIPATH_R_CHIPREVMINOR_MASK);
- dd->ipath_boardrev = (u8) ((dd->ipath_revision >>
- INFINIPATH_R_BOARDID_SHIFT) &
- INFINIPATH_R_BOARDID_MASK);
-
- ret = dd->ipath_f_get_boardname(dd, boardn, sizeof boardn);
-
- snprintf(dd->ipath_boardversion, sizeof(dd->ipath_boardversion),
- "ChipABI %u.%u, %s, InfiniPath%u %u.%u, PCI %u, "
- "SW Compat %u\n",
- IPATH_CHIP_VERS_MAJ, IPATH_CHIP_VERS_MIN, boardn,
- (unsigned)(dd->ipath_revision >> INFINIPATH_R_ARCH_SHIFT) &
- INFINIPATH_R_ARCH_MASK,
- dd->ipath_majrev, dd->ipath_minrev, dd->ipath_pcirev,
- (unsigned)(dd->ipath_revision >>
- INFINIPATH_R_SOFTWARE_SHIFT) &
- INFINIPATH_R_SOFTWARE_MASK);
-
- ipath_dbg("%s", dd->ipath_boardversion);
-
- if (ret)
- goto done;
-
- if (reinit)
- ret = init_chip_reset(dd);
- else
- ret = init_chip_first(dd);
-
-done:
- return ret;
-}
-
-static void verify_interrupt(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
-
- if (!dd)
- return; /* being torn down */
-
- /*
- * If we don't have any interrupts, let the user know and
- * don't bother checking again.
- */
- if (dd->ipath_int_counter == 0) {
- if (!dd->ipath_f_intr_fallback(dd))
- dev_err(&dd->pcidev->dev, "No interrupts detected, "
- "not usable.\n");
- else /* re-arm the timer to see if fallback works */
- mod_timer(&dd->ipath_intrchk_timer, jiffies + HZ/2);
- } else
- ipath_cdbg(VERBOSE, "%u interrupts at timer check\n",
- dd->ipath_int_counter);
-}
-
-/**
- * ipath_init_chip - do the actual initialization sequence on the chip
- * @dd: the infinipath device
- * @reinit: reinitializing, so don't allocate new memory
- *
- * Do the actual initialization sequence on the chip. This is done
- * both from the init routine called from the PCI infrastructure, and
- * when we reset the chip, or detect that it was reset internally,
- * or it's administratively re-enabled.
- *
- * Memory allocation here and in called routines is only done in
- * the first case (reinit == 0). We have to be careful, because even
- * without memory allocation, we need to re-write all the chip registers
- * TIDs, etc. after the reset or enable has completed.
- */
-int ipath_init_chip(struct ipath_devdata *dd, int reinit)
-{
- int ret = 0;
- u32 kpiobufs, defkbufs;
- u32 piobufs, uports;
- u64 val;
- struct ipath_portdata *pd;
- gfp_t gfp_flags = GFP_USER | __GFP_COMP;
-
- ret = init_housekeeping(dd, reinit);
- if (ret)
- goto done;
-
- /*
- * We could bump this to allow for full rcvegrcnt + rcvtidcnt,
- * but then it no longer nicely fits power of two, and since
- * we now use routines that backend onto __get_free_pages, the
- * rest would be wasted.
- */
- dd->ipath_rcvhdrcnt = max(dd->ipath_p0_rcvegrcnt, dd->ipath_rcvegrcnt);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrcnt,
- dd->ipath_rcvhdrcnt);
-
- /*
- * Set up the shadow copies of the piobufavail registers,
- * which we compare against the chip registers for now, and
- * the in memory DMA'ed copies of the registers. This has to
- * be done early, before we calculate lastport, etc.
- */
- piobufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
- /*
- * calc number of pioavail registers, and save it; we have 2
- * bits per buffer.
- */
- dd->ipath_pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2)
- / (sizeof(u64) * BITS_PER_BYTE / 2);
- uports = dd->ipath_cfgports ? dd->ipath_cfgports - 1 : 0;
- if (piobufs > 144)
- defkbufs = 32 + dd->ipath_pioreserved;
- else
- defkbufs = 16 + dd->ipath_pioreserved;
-
- if (ipath_kpiobufs && (ipath_kpiobufs +
- (uports * IPATH_MIN_USER_PORT_BUFCNT)) > piobufs) {
- int i = (int) piobufs -
- (int) (uports * IPATH_MIN_USER_PORT_BUFCNT);
- if (i < 1)
- i = 1;
- dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs of "
- "%d for kernel leaves too few for %d user ports "
- "(%d each); using %u\n", ipath_kpiobufs,
- piobufs, uports, IPATH_MIN_USER_PORT_BUFCNT, i);
- /*
- * shouldn't change ipath_kpiobufs, because could be
- * different for different devices...
- */
- kpiobufs = i;
- } else if (ipath_kpiobufs)
- kpiobufs = ipath_kpiobufs;
- else
- kpiobufs = defkbufs;
- dd->ipath_lastport_piobuf = piobufs - kpiobufs;
- dd->ipath_pbufsport =
- uports ? dd->ipath_lastport_piobuf / uports : 0;
- /* if not an even divisor, some user ports get extra buffers */
- dd->ipath_ports_extrabuf = dd->ipath_lastport_piobuf -
- (dd->ipath_pbufsport * uports);
- if (dd->ipath_ports_extrabuf)
- ipath_dbg("%u pbufs/port leaves some unused, add 1 buffer to "
- "ports <= %u\n", dd->ipath_pbufsport,
- dd->ipath_ports_extrabuf);
- dd->ipath_lastpioindex = 0;
- dd->ipath_lastpioindexl = dd->ipath_piobcnt2k;
- /* ipath_pioavailshadow initialized earlier */
- ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u "
- "each for %u user ports\n", kpiobufs,
- piobufs, dd->ipath_pbufsport, uports);
- ret = dd->ipath_f_early_init(dd);
- if (ret) {
- ipath_dev_err(dd, "Early initialization failure\n");
- goto done;
- }
-
- /*
- * Early_init sets rcvhdrentsize and rcvhdrsize, so this must be
- * done after early_init.
- */
- dd->ipath_hdrqlast =
- dd->ipath_rcvhdrentsize * (dd->ipath_rcvhdrcnt - 1);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrentsize,
- dd->ipath_rcvhdrentsize);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
- dd->ipath_rcvhdrsize);
-
- if (!reinit) {
- ret = init_pioavailregs(dd);
- init_shadow_tids(dd);
- if (ret)
- goto done;
- }
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
- dd->ipath_pioavailregs_phys);
-
- /*
- * this is to detect s/w errors, which the h/w works around by
- * ignoring the low 6 bits of address, if it wasn't aligned.
- */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpioavailaddr);
- if (val != dd->ipath_pioavailregs_phys) {
- ipath_dev_err(dd, "Catastrophic software error, "
- "SendPIOAvailAddr written as %lx, "
- "read back as %llx\n",
- (unsigned long) dd->ipath_pioavailregs_phys,
- (unsigned long long) val);
- ret = -EINVAL;
- goto done;
- }
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvbthqp, IPATH_KD_QP);
-
- /*
- * make sure we are not in freeze, and PIO send enabled, so
- * writes to pbc happen
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, 0ULL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
-
- /*
- * before error clears, since we expect serdes pll errors during
- * this, the first time after reset
- */
- if (bringup_link(dd)) {
- dev_info(&dd->pcidev->dev, "Failed to bringup IB link\n");
- ret = -ENETDOWN;
- goto done;
- }
-
- /*
- * clear any "expected" hwerrs from reset and/or initialization
- * clear any that aren't enabled (at least this once), and then
- * set the enable mask
- */
- dd->ipath_f_init_hwerrors(dd);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
-
- /* clear all */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
- /* enable errors that are masked, at least this first time. */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- ~dd->ipath_maskederrs);
- dd->ipath_maskederrs = 0; /* don't re-enable ignored in timer */
- dd->ipath_errormask =
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_errormask);
- /* clear any interrupts up to this point (ints still not enabled) */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
-
- dd->ipath_f_tidtemplate(dd);
-
- /*
- * Set up the port 0 (kernel) rcvhdr q and egr TIDs. If doing
- * re-init, the simplest way to handle this is to free
- * existing, and re-allocate.
- * Need to re-create rest of port 0 portdata as well.
- */
- pd = dd->ipath_pd[0];
- if (reinit) {
- struct ipath_portdata *npd;
-
- /*
- * Alloc and init new ipath_portdata for port0,
- * Then free old pd. Could lead to fragmentation, but also
- * makes later support for hot-swap easier.
- */
- npd = create_portdata0(dd);
- if (npd) {
- ipath_free_pddata(dd, pd);
- dd->ipath_pd[0] = npd;
- pd = npd;
- } else {
- ipath_dev_err(dd, "Unable to allocate portdata"
- " for port 0, failing\n");
- ret = -ENOMEM;
- goto done;
- }
- }
- ret = ipath_create_rcvhdrq(dd, pd);
- if (!ret)
- ret = create_port0_egr(dd);
- if (ret) {
- ipath_dev_err(dd, "failed to allocate kernel port's "
- "rcvhdrq and/or egr bufs\n");
- goto done;
- }
- else
- enable_chip(dd, reinit);
-
- /* after enable_chip, so pioavailshadow setup */
- ipath_chg_pioavailkernel(dd, 0, piobufs, 1);
-
- /*
- * Cancel any possible active sends from early driver load.
- * Follows early_init because some chips have to initialize
- * PIO buffers in early_init to avoid false parity errors.
- * After enable and ipath_chg_pioavailkernel so we can safely
- * enable pioavail updates and PIOENABLE; packets are now
- * ready to go out.
- */
- ipath_cancel_sends(dd, 1);
-
- if (!reinit) {
- /*
- * Used when we close a port, for DMA already in flight
- * at close.
- */
- dd->ipath_dummy_hdrq = dma_alloc_coherent(
- &dd->pcidev->dev, dd->ipath_pd[0]->port_rcvhdrq_size,
- &dd->ipath_dummy_hdrq_phys,
- gfp_flags);
- if (!dd->ipath_dummy_hdrq) {
- dev_info(&dd->pcidev->dev,
- "Couldn't allocate 0x%lx bytes for dummy hdrq\n",
- dd->ipath_pd[0]->port_rcvhdrq_size);
- /* fallback to just 0'ing */
- dd->ipath_dummy_hdrq_phys = 0UL;
- }
- }
-
- /*
- * cause retrigger of pending interrupts ignored during init,
- * even if we had errors
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
-
- if (!dd->ipath_stats_timer_active) {
- /*
- * first init, or after an admin disable/enable
- * set up stats retrieval timer, even if we had errors
- * in last portion of setup
- */
- init_timer(&dd->ipath_stats_timer);
- dd->ipath_stats_timer.function = ipath_get_faststats;
- dd->ipath_stats_timer.data = (unsigned long) dd;
- /* every 5 seconds; */
- dd->ipath_stats_timer.expires = jiffies + 5 * HZ;
- /* takes ~16 seconds to overflow at full IB 4x bandwdith */
- add_timer(&dd->ipath_stats_timer);
- dd->ipath_stats_timer_active = 1;
- }
-
- /* Set up SendDMA if chip supports it */
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- ret = setup_sdma(dd);
-
- /* Set up HoL state */
- init_timer(&dd->ipath_hol_timer);
- dd->ipath_hol_timer.function = ipath_hol_event;
- dd->ipath_hol_timer.data = (unsigned long)dd;
- dd->ipath_hol_state = IPATH_HOL_UP;
-
-done:
- if (!ret) {
- *dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
- if (!dd->ipath_f_intrsetup(dd)) {
- /* now we can enable all interrupts from the chip */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
- -1LL);
- /* force re-interrupt of any pending interrupts. */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear,
- 0ULL);
- /* chip is usable; mark it as initialized */
- *dd->ipath_statusp |= IPATH_STATUS_INITTED;
-
- /*
- * setup to verify we get an interrupt, and fallback
- * to an alternate if necessary and possible
- */
- if (!reinit) {
- init_timer(&dd->ipath_intrchk_timer);
- dd->ipath_intrchk_timer.function =
- verify_interrupt;
- dd->ipath_intrchk_timer.data =
- (unsigned long) dd;
- }
- dd->ipath_intrchk_timer.expires = jiffies + HZ/2;
- add_timer(&dd->ipath_intrchk_timer);
- } else
- ipath_dev_err(dd, "No interrupts enabled, couldn't "
- "setup interrupt address\n");
-
- if (dd->ipath_cfgports > ipath_stats.sps_nports)
- /*
- * sps_nports is a global, so, we set it to
- * the highest number of ports of any of the
- * chips we find; we never decrement it, at
- * least for now. Since this might have changed
- * over disable/enable or prior to reset, always
- * do the check and potentially adjust.
- */
- ipath_stats.sps_nports = dd->ipath_cfgports;
- } else
- ipath_dbg("Failed (%d) to initialize chip\n", ret);
-
- /* if ret is non-zero, we probably should do some cleanup
- here... */
- return ret;
-}
-
-static int ipath_set_kpiobufs(const char *str, struct kernel_param *kp)
-{
- struct ipath_devdata *dd;
- unsigned long flags;
- unsigned short val;
- int ret;
-
- ret = ipath_parse_ushort(str, &val);
-
- spin_lock_irqsave(&ipath_devs_lock, flags);
-
- if (ret < 0)
- goto bail;
-
- if (val == 0) {
- ret = -EINVAL;
- goto bail;
- }
-
- list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
- if (dd->ipath_kregbase)
- continue;
- if (val > (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
- (dd->ipath_cfgports *
- IPATH_MIN_USER_PORT_BUFCNT)))
- {
- ipath_dev_err(
- dd,
- "Allocating %d PIO bufs for kernel leaves "
- "too few for %d user ports (%d each)\n",
- val, dd->ipath_cfgports - 1,
- IPATH_MIN_USER_PORT_BUFCNT);
- ret = -EINVAL;
- goto bail;
- }
- dd->ipath_lastport_piobuf =
- dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - val;
- }
-
- ipath_kpiobufs = val;
- ret = 0;
-bail:
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
-
- return ret;
-}
Code Review / kvmfornfv.git / blobdiff