--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/bitmap.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include "ipath_kernel.h"
+#include "ipath_verbs.h"
+
+static void ipath_update_pio_bufs(struct ipath_devdata *);
+
+const char *ipath_get_unit_name(int unit)
+{
+ static char iname[16];
+ snprintf(iname, sizeof iname, "infinipath%u", unit);
+ return iname;
+}
+
+#define DRIVER_LOAD_MSG "QLogic " IPATH_DRV_NAME " loaded: "
+#define PFX IPATH_DRV_NAME ": "
+
+/*
+ * The size has to be longer than this string, so we can append
+ * board/chip information to it in the init code.
+ */
+const char ib_ipath_version[] = IPATH_IDSTR "\n";
+
+static struct idr unit_table;
+DEFINE_SPINLOCK(ipath_devs_lock);
+LIST_HEAD(ipath_dev_list);
+
+wait_queue_head_t ipath_state_wait;
+
+unsigned ipath_debug = __IPATH_INFO;
+
+module_param_named(debug, ipath_debug, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(debug, "mask for debug prints");
+EXPORT_SYMBOL_GPL(ipath_debug);
+
+unsigned ipath_mtu4096 = 1; /* max 4KB IB mtu by default, if supported */
+module_param_named(mtu4096, ipath_mtu4096, uint, S_IRUGO);
+MODULE_PARM_DESC(mtu4096, "enable MTU of 4096 bytes, if supported");
+
+static unsigned ipath_hol_timeout_ms = 13000;
+module_param_named(hol_timeout_ms, ipath_hol_timeout_ms, uint, S_IRUGO);
+MODULE_PARM_DESC(hol_timeout_ms,
+ "duration of user app suspension after link failure");
+
+unsigned ipath_linkrecovery = 1;
+module_param_named(linkrecovery, ipath_linkrecovery, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(linkrecovery, "enable workaround for link recovery issue");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("QLogic <support@qlogic.com>");
+MODULE_DESCRIPTION("QLogic InfiniPath driver");
+
+/*
+ * Table to translate the LINKTRAININGSTATE portion of
+ * IBCStatus to a human-readable form.
+ */
+const char *ipath_ibcstatus_str[] = {
+ "Disabled",
+ "LinkUp",
+ "PollActive",
+ "PollQuiet",
+ "SleepDelay",
+ "SleepQuiet",
+ "LState6", /* unused */
+ "LState7", /* unused */
+ "CfgDebounce",
+ "CfgRcvfCfg",
+ "CfgWaitRmt",
+ "CfgIdle",
+ "RecovRetrain",
+ "CfgTxRevLane", /* unused before IBA7220 */
+ "RecovWaitRmt",
+ "RecovIdle",
+ /* below were added for IBA7220 */
+ "CfgEnhanced",
+ "CfgTest",
+ "CfgWaitRmtTest",
+ "CfgWaitCfgEnhanced",
+ "SendTS_T",
+ "SendTstIdles",
+ "RcvTS_T",
+ "SendTst_TS1s",
+ "LTState18", "LTState19", "LTState1A", "LTState1B",
+ "LTState1C", "LTState1D", "LTState1E", "LTState1F"
+};
+
+static void ipath_remove_one(struct pci_dev *);
+static int ipath_init_one(struct pci_dev *, const struct pci_device_id *);
+
+/* Only needed for registration, nothing else needs this info */
+#define PCI_VENDOR_ID_PATHSCALE 0x1fc1
+#define PCI_DEVICE_ID_INFINIPATH_HT 0xd
+
+/* Number of seconds before our card status check... */
+#define STATUS_TIMEOUT 60
+
+static const struct pci_device_id ipath_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, ipath_pci_tbl);
+
+static struct pci_driver ipath_driver = {
+ .name = IPATH_DRV_NAME,
+ .probe = ipath_init_one,
+ .remove = ipath_remove_one,
+ .id_table = ipath_pci_tbl,
+ .driver = {
+ .groups = ipath_driver_attr_groups,
+ },
+};
+
+static inline void read_bars(struct ipath_devdata *dd, struct pci_dev *dev,
+ u32 *bar0, u32 *bar1)
+{
+ int ret;
+
+ ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
+ if (ret)
+ ipath_dev_err(dd, "failed to read bar0 before enable: "
+ "error %d\n", -ret);
+
+ ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, bar1);
+ if (ret)
+ ipath_dev_err(dd, "failed to read bar1 before enable: "
+ "error %d\n", -ret);
+
+ ipath_dbg("Read bar0 %x bar1 %x\n", *bar0, *bar1);
+}
+
+static void ipath_free_devdata(struct pci_dev *pdev,
+ struct ipath_devdata *dd)
+{
+ unsigned long flags;
+
+ pci_set_drvdata(pdev, NULL);
+
+ if (dd->ipath_unit != -1) {
+ spin_lock_irqsave(&ipath_devs_lock, flags);
+ idr_remove(&unit_table, dd->ipath_unit);
+ list_del(&dd->ipath_list);
+ spin_unlock_irqrestore(&ipath_devs_lock, flags);
+ }
+ vfree(dd);
+}
+
+static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev)
+{
+ unsigned long flags;
+ struct ipath_devdata *dd;
+ int ret;
+
+ dd = vzalloc(sizeof(*dd));
+ if (!dd) {
+ dd = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+ dd->ipath_unit = -1;
+
+ idr_preload(GFP_KERNEL);
+ spin_lock_irqsave(&ipath_devs_lock, flags);
+
+ ret = idr_alloc(&unit_table, dd, 0, 0, GFP_NOWAIT);
+ if (ret < 0) {
+ printk(KERN_ERR IPATH_DRV_NAME
+ ": Could not allocate unit ID: error %d\n", -ret);
+ ipath_free_devdata(pdev, dd);
+ dd = ERR_PTR(ret);
+ goto bail_unlock;
+ }
+ dd->ipath_unit = ret;
+
+ dd->pcidev = pdev;
+ pci_set_drvdata(pdev, dd);
+
+ list_add(&dd->ipath_list, &ipath_dev_list);
+
+bail_unlock:
+ spin_unlock_irqrestore(&ipath_devs_lock, flags);
+ idr_preload_end();
+bail:
+ return dd;
+}
+
+static inline struct ipath_devdata *__ipath_lookup(int unit)
+{
+ return idr_find(&unit_table, unit);
+}
+
+struct ipath_devdata *ipath_lookup(int unit)
+{
+ struct ipath_devdata *dd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipath_devs_lock, flags);
+ dd = __ipath_lookup(unit);
+ spin_unlock_irqrestore(&ipath_devs_lock, flags);
+
+ return dd;
+}
+
+int ipath_count_units(int *npresentp, int *nupp, int *maxportsp)
+{
+ int nunits, npresent, nup;
+ struct ipath_devdata *dd;
+ unsigned long flags;
+ int maxports;
+
+ nunits = npresent = nup = maxports = 0;
+
+ spin_lock_irqsave(&ipath_devs_lock, flags);
+
+ list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
+ nunits++;
+ if ((dd->ipath_flags & IPATH_PRESENT) && dd->ipath_kregbase)
+ npresent++;
+ if (dd->ipath_lid &&
+ !(dd->ipath_flags & (IPATH_DISABLED | IPATH_LINKDOWN
+ | IPATH_LINKUNK)))
+ nup++;
+ if (dd->ipath_cfgports > maxports)
+ maxports = dd->ipath_cfgports;
+ }
+
+ spin_unlock_irqrestore(&ipath_devs_lock, flags);
+
+ if (npresentp)
+ *npresentp = npresent;
+ if (nupp)
+ *nupp = nup;
+ if (maxportsp)
+ *maxportsp = maxports;
+
+ return nunits;
+}
+
+/*
+ * These next two routines are placeholders in case we don't have per-arch
+ * code for controlling write combining. If explicit control of write
+ * combining is not available, performance will probably be awful.
+ */
+
+int __attribute__((weak)) ipath_enable_wc(struct ipath_devdata *dd)
+{
+ return -EOPNOTSUPP;
+}
+
+void __attribute__((weak)) ipath_disable_wc(struct ipath_devdata *dd)
+{
+}
+
+/*
+ * Perform a PIO buffer bandwidth write test, to verify proper system
+ * configuration. Even when all the setup calls work, occasionally
+ * BIOS or other issues can prevent write combining from working, or
+ * can cause other bandwidth problems to the chip.
+ *
+ * This test simply writes the same buffer over and over again, and
+ * measures close to the peak bandwidth to the chip (not testing
+ * data bandwidth to the wire). On chips that use an address-based
+ * trigger to send packets to the wire, this is easy. On chips that
+ * use a count to trigger, we want to make sure that the packet doesn't
+ * go out on the wire, or trigger flow control checks.
+ */
+static void ipath_verify_pioperf(struct ipath_devdata *dd)
+{
+ u32 pbnum, cnt, lcnt;
+ u32 __iomem *piobuf;
+ u32 *addr;
+ u64 msecs, emsecs;
+
+ piobuf = ipath_getpiobuf(dd, 0, &pbnum);
+ if (!piobuf) {
+ dev_info(&dd->pcidev->dev,
+ "No PIObufs for checking perf, skipping\n");
+ return;
+ }
+
+ /*
+ * Enough to give us a reasonable test, less than piobuf size, and
+ * likely multiple of store buffer length.
+ */
+ cnt = 1024;
+
+ addr = vmalloc(cnt);
+ if (!addr) {
+ dev_info(&dd->pcidev->dev,
+ "Couldn't get memory for checking PIO perf,"
+ " skipping\n");
+ goto done;
+ }
+
+ preempt_disable(); /* we want reasonably accurate elapsed time */
+ msecs = 1 + jiffies_to_msecs(jiffies);
+ for (lcnt = 0; lcnt < 10000U; lcnt++) {
+ /* wait until we cross msec boundary */
+ if (jiffies_to_msecs(jiffies) >= msecs)
+ break;
+ udelay(1);
+ }
+
+ ipath_disable_armlaunch(dd);
+
+ /*
+ * length 0, no dwords actually sent, and mark as VL15
+ * on chips where that may matter (due to IB flowcontrol)
+ */
+ if ((dd->ipath_flags & IPATH_HAS_PBC_CNT))
+ writeq(1UL << 63, piobuf);
+ else
+ writeq(0, piobuf);
+ ipath_flush_wc();
+
+ /*
+ * this is only roughly accurate, since even with preempt we
+ * still take interrupts that could take a while. Running for
+ * >= 5 msec seems to get us "close enough" to accurate values
+ */
+ msecs = jiffies_to_msecs(jiffies);
+ for (emsecs = lcnt = 0; emsecs <= 5UL; lcnt++) {
+ __iowrite32_copy(piobuf + 64, addr, cnt >> 2);
+ emsecs = jiffies_to_msecs(jiffies) - msecs;
+ }
+
+ /* 1 GiB/sec, slightly over IB SDR line rate */
+ if (lcnt < (emsecs * 1024U))
+ ipath_dev_err(dd,
+ "Performance problem: bandwidth to PIO buffers is "
+ "only %u MiB/sec\n",
+ lcnt / (u32) emsecs);
+ else
+ ipath_dbg("PIO buffer bandwidth %u MiB/sec is OK\n",
+ lcnt / (u32) emsecs);
+
+ preempt_enable();
+
+ vfree(addr);
+
+done:
+ /* disarm piobuf, so it's available again */
+ ipath_disarm_piobufs(dd, pbnum, 1);
+ ipath_enable_armlaunch(dd);
+}
+
+static void cleanup_device(struct ipath_devdata *dd);
+
+static int ipath_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int ret, len, j;
+ struct ipath_devdata *dd;
+ unsigned long long addr;
+ u32 bar0 = 0, bar1 = 0;
+
+ dd = ipath_alloc_devdata(pdev);
+ if (IS_ERR(dd)) {
+ ret = PTR_ERR(dd);
+ printk(KERN_ERR IPATH_DRV_NAME
+ ": Could not allocate devdata: error %d\n", -ret);
+ goto bail;
+ }
+
+ ipath_cdbg(VERBOSE, "initializing unit #%u\n", dd->ipath_unit);
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ /* This can happen iff:
+ *
+ * We did a chip reset, and then failed to reprogram the
+ * BAR, or the chip reset due to an internal error. We then
+ * unloaded the driver and reloaded it.
+ *
+ * Both reset cases set the BAR back to initial state. For
+ * the latter case, the AER sticky error bit at offset 0x718
+ * should be set, but the Linux kernel doesn't yet know
+ * about that, it appears. If the original BAR was retained
+ * in the kernel data structures, this may be OK.
+ */
+ ipath_dev_err(dd, "enable unit %d failed: error %d\n",
+ dd->ipath_unit, -ret);
+ goto bail_devdata;
+ }
+ addr = pci_resource_start(pdev, 0);
+ len = pci_resource_len(pdev, 0);
+ ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %d, vend %x/%x "
+ "driver_data %lx\n", addr, len, pdev->irq, ent->vendor,
+ ent->device, ent->driver_data);
+
+ read_bars(dd, pdev, &bar0, &bar1);
+
+ if (!bar1 && !(bar0 & ~0xf)) {
+ if (addr) {
+ dev_info(&pdev->dev, "BAR is 0 (probable RESET), "
+ "rewriting as %llx\n", addr);
+ ret = pci_write_config_dword(
+ pdev, PCI_BASE_ADDRESS_0, addr);
+ if (ret) {
+ ipath_dev_err(dd, "rewrite of BAR0 "
+ "failed: err %d\n", -ret);
+ goto bail_disable;
+ }
+ ret = pci_write_config_dword(
+ pdev, PCI_BASE_ADDRESS_1, addr >> 32);
+ if (ret) {
+ ipath_dev_err(dd, "rewrite of BAR1 "
+ "failed: err %d\n", -ret);
+ goto bail_disable;
+ }
+ } else {
+ ipath_dev_err(dd, "BAR is 0 (probable RESET), "
+ "not usable until reboot\n");
+ ret = -ENODEV;
+ goto bail_disable;
+ }
+ }
+
+ ret = pci_request_regions(pdev, IPATH_DRV_NAME);
+ if (ret) {
+ dev_info(&pdev->dev, "pci_request_regions unit %u fails: "
+ "err %d\n", dd->ipath_unit, -ret);
+ goto bail_disable;
+ }
+
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret) {
+ /*
+ * if the 64 bit setup fails, try 32 bit. Some systems
+ * do not setup 64 bit maps on systems with 2GB or less
+ * memory installed.
+ */
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_info(&pdev->dev,
+ "Unable to set DMA mask for unit %u: %d\n",
+ dd->ipath_unit, ret);
+ goto bail_regions;
+ }
+ else {
+ ipath_dbg("No 64bit DMA mask, used 32 bit mask\n");
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret)
+ dev_info(&pdev->dev,
+ "Unable to set DMA consistent mask "
+ "for unit %u: %d\n",
+ dd->ipath_unit, ret);
+
+ }
+ }
+ else {
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret)
+ dev_info(&pdev->dev,
+ "Unable to set DMA consistent mask "
+ "for unit %u: %d\n",
+ dd->ipath_unit, ret);
+ }
+
+ pci_set_master(pdev);
+
+ /*
+ * Save BARs to rewrite after device reset. Save all 64 bits of
+ * BAR, just in case.
+ */
+ dd->ipath_pcibar0 = addr;
+ dd->ipath_pcibar1 = addr >> 32;
+ dd->ipath_deviceid = ent->device; /* save for later use */
+ dd->ipath_vendorid = ent->vendor;
+
+ /* setup the chip-specific functions, as early as possible. */
+ switch (ent->device) {
+ case PCI_DEVICE_ID_INFINIPATH_HT:
+ ipath_init_iba6110_funcs(dd);
+ break;
+
+ default:
+ ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
+ "failing\n", ent->device);
+ return -ENODEV;
+ }
+
+ for (j = 0; j < 6; j++) {
+ if (!pdev->resource[j].start)
+ continue;
+ ipath_cdbg(VERBOSE, "BAR %d %pR, len %llx\n",
+ j, &pdev->resource[j],
+ (unsigned long long)pci_resource_len(pdev, j));
+ }
+
+ if (!addr) {
+ ipath_dev_err(dd, "No valid address in BAR 0!\n");
+ ret = -ENODEV;
+ goto bail_regions;
+ }
+
+ dd->ipath_pcirev = pdev->revision;
+
+#if defined(__powerpc__)
+ /* There isn't a generic way to specify writethrough mappings */
+ dd->ipath_kregbase = __ioremap(addr, len,
+ (_PAGE_NO_CACHE|_PAGE_WRITETHRU));
+#else
+ dd->ipath_kregbase = ioremap_nocache(addr, len);
+#endif
+
+ if (!dd->ipath_kregbase) {
+ ipath_dbg("Unable to map io addr %llx to kvirt, failing\n",
+ addr);
+ ret = -ENOMEM;
+ goto bail_iounmap;
+ }
+ dd->ipath_kregend = (u64 __iomem *)
+ ((void __iomem *)dd->ipath_kregbase + len);
+ dd->ipath_physaddr = addr; /* used for io_remap, etc. */
+ /* for user mmap */
+ ipath_cdbg(VERBOSE, "mapped io addr %llx to kregbase %p\n",
+ addr, dd->ipath_kregbase);
+
+ if (dd->ipath_f_bus(dd, pdev))
+ ipath_dev_err(dd, "Failed to setup config space; "
+ "continuing anyway\n");
+
+ /*
+ * set up our interrupt handler; IRQF_SHARED probably not needed,
+ * since MSI interrupts shouldn't be shared but won't hurt for now.
+ * check 0 irq after we return from chip-specific bus setup, since
+ * that can affect this due to setup
+ */
+ if (!dd->ipath_irq)
+ ipath_dev_err(dd, "irq is 0, BIOS error? Interrupts won't "
+ "work\n");
+ else {
+ ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED,
+ IPATH_DRV_NAME, dd);
+ if (ret) {
+ ipath_dev_err(dd, "Couldn't setup irq handler, "
+ "irq=%d: %d\n", dd->ipath_irq, ret);
+ goto bail_iounmap;
+ }
+ }
+
+ ret = ipath_init_chip(dd, 0); /* do the chip-specific init */
+ if (ret)
+ goto bail_irqsetup;
+
+ ret = ipath_enable_wc(dd);
+
+ if (ret) {
+ ipath_dev_err(dd, "Write combining not enabled "
+ "(err %d): performance may be poor\n",
+ -ret);
+ ret = 0;
+ }
+
+ ipath_verify_pioperf(dd);
+
+ ipath_device_create_group(&pdev->dev, dd);
+ ipathfs_add_device(dd);
+ ipath_user_add(dd);
+ ipath_diag_add(dd);
+ ipath_register_ib_device(dd);
+
+ goto bail;
+
+bail_irqsetup:
+ cleanup_device(dd);
+
+ if (dd->ipath_irq)
+ dd->ipath_f_free_irq(dd);
+
+ if (dd->ipath_f_cleanup)
+ dd->ipath_f_cleanup(dd);
+
+bail_iounmap:
+ iounmap((volatile void __iomem *) dd->ipath_kregbase);
+
+bail_regions:
+ pci_release_regions(pdev);
+
+bail_disable:
+ pci_disable_device(pdev);
+
+bail_devdata:
+ ipath_free_devdata(pdev, dd);
+
+bail:
+ return ret;
+}
+
+static void cleanup_device(struct ipath_devdata *dd)
+{
+ int port;
+ struct ipath_portdata **tmp;
+ unsigned long flags;
+
+ if (*dd->ipath_statusp & IPATH_STATUS_CHIP_PRESENT) {
+ /* can't do anything more with chip; needs re-init */
+ *dd->ipath_statusp &= ~IPATH_STATUS_CHIP_PRESENT;
+ if (dd->ipath_kregbase) {
+ /*
+ * if we haven't already cleaned up before these are
+ * to ensure any register reads/writes "fail" until
+ * re-init
+ */
+ dd->ipath_kregbase = NULL;
+ dd->ipath_uregbase = 0;
+ dd->ipath_sregbase = 0;
+ dd->ipath_cregbase = 0;
+ dd->ipath_kregsize = 0;
+ }
+ ipath_disable_wc(dd);
+ }
+
+ if (dd->ipath_spectriggerhit)
+ dev_info(&dd->pcidev->dev, "%lu special trigger hits\n",
+ dd->ipath_spectriggerhit);
+
+ if (dd->ipath_pioavailregs_dma) {
+ dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+ (void *) dd->ipath_pioavailregs_dma,
+ dd->ipath_pioavailregs_phys);
+ dd->ipath_pioavailregs_dma = NULL;
+ }
+ if (dd->ipath_dummy_hdrq) {
+ dma_free_coherent(&dd->pcidev->dev,
+ dd->ipath_pd[0]->port_rcvhdrq_size,
+ dd->ipath_dummy_hdrq, dd->ipath_dummy_hdrq_phys);
+ dd->ipath_dummy_hdrq = NULL;
+ }
+
+ if (dd->ipath_pageshadow) {
+ struct page **tmpp = dd->ipath_pageshadow;
+ dma_addr_t *tmpd = dd->ipath_physshadow;
+ int i, cnt = 0;
+
+ ipath_cdbg(VERBOSE, "Unlocking any expTID pages still "
+ "locked\n");
+ for (port = 0; port < dd->ipath_cfgports; port++) {
+ int port_tidbase = port * dd->ipath_rcvtidcnt;
+ int maxtid = port_tidbase + dd->ipath_rcvtidcnt;
+ for (i = port_tidbase; i < maxtid; i++) {
+ if (!tmpp[i])
+ continue;
+ pci_unmap_page(dd->pcidev, tmpd[i],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ ipath_release_user_pages(&tmpp[i], 1);
+ tmpp[i] = NULL;
+ cnt++;
+ }
+ }
+ if (cnt) {
+ ipath_stats.sps_pageunlocks += cnt;
+ ipath_cdbg(VERBOSE, "There were still %u expTID "
+ "entries locked\n", cnt);
+ }
+ if (ipath_stats.sps_pagelocks ||
+ ipath_stats.sps_pageunlocks)
+ ipath_cdbg(VERBOSE, "%llu pages locked, %llu "
+ "unlocked via ipath_m{un}lock\n",
+ (unsigned long long)
+ ipath_stats.sps_pagelocks,
+ (unsigned long long)
+ ipath_stats.sps_pageunlocks);
+
+ ipath_cdbg(VERBOSE, "Free shadow page tid array at %p\n",
+ dd->ipath_pageshadow);
+ tmpp = dd->ipath_pageshadow;
+ dd->ipath_pageshadow = NULL;
+ vfree(tmpp);
+
+ dd->ipath_egrtidbase = NULL;
+ }
+
+ /*
+ * free any resources still in use (usually just kernel ports)
+ * at unload; we do for portcnt, because that's what we allocate.
+ * We acquire lock to be really paranoid that ipath_pd isn't being
+ * accessed from some interrupt-related code (that should not happen,
+ * but best to be sure).
+ */
+ spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
+ tmp = dd->ipath_pd;
+ dd->ipath_pd = NULL;
+ spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
+ for (port = 0; port < dd->ipath_portcnt; port++) {
+ struct ipath_portdata *pd = tmp[port];
+ tmp[port] = NULL; /* debugging paranoia */
+ ipath_free_pddata(dd, pd);
+ }
+ kfree(tmp);
+}
+
+static void ipath_remove_one(struct pci_dev *pdev)
+{
+ struct ipath_devdata *dd = pci_get_drvdata(pdev);
+
+ ipath_cdbg(VERBOSE, "removing, pdev=%p, dd=%p\n", pdev, dd);
+
+ /*
+ * disable the IB link early, to be sure no new packets arrive, which
+ * complicates the shutdown process
+ */
+ ipath_shutdown_device(dd);
+
+ flush_workqueue(ib_wq);
+
+ if (dd->verbs_dev)
+ ipath_unregister_ib_device(dd->verbs_dev);
+
+ ipath_diag_remove(dd);
+ ipath_user_remove(dd);
+ ipathfs_remove_device(dd);
+ ipath_device_remove_group(&pdev->dev, dd);
+
+ ipath_cdbg(VERBOSE, "Releasing pci memory regions, dd %p, "
+ "unit %u\n", dd, (u32) dd->ipath_unit);
+
+ cleanup_device(dd);
+
+ /*
+ * turn off rcv, send, and interrupts for all ports, all drivers
+ * should also hard reset the chip here?
+ * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs
+ * for all versions of the driver, if they were allocated
+ */
+ if (dd->ipath_irq) {
+ ipath_cdbg(VERBOSE, "unit %u free irq %d\n",
+ dd->ipath_unit, dd->ipath_irq);
+ dd->ipath_f_free_irq(dd);
+ } else
+ ipath_dbg("irq is 0, not doing free_irq "
+ "for unit %u\n", dd->ipath_unit);
+ /*
+ * we check for NULL here, because it's outside
+ * the kregbase check, and we need to call it
+ * after the free_irq. Thus it's possible that
+ * the function pointers were never initialized.
+ */
+ if (dd->ipath_f_cleanup)
+ /* clean up chip-specific stuff */
+ dd->ipath_f_cleanup(dd);
+
+ ipath_cdbg(VERBOSE, "Unmapping kregbase %p\n", dd->ipath_kregbase);
+ iounmap((volatile void __iomem *) dd->ipath_kregbase);
+ pci_release_regions(pdev);
+ ipath_cdbg(VERBOSE, "calling pci_disable_device\n");
+ pci_disable_device(pdev);
+
+ ipath_free_devdata(pdev, dd);
+}
+
+/* general driver use */
+DEFINE_MUTEX(ipath_mutex);
+
+static DEFINE_SPINLOCK(ipath_pioavail_lock);
+
+/**
+ * ipath_disarm_piobufs - cancel a range of PIO buffers
+ * @dd: the infinipath device
+ * @first: the first PIO buffer to cancel
+ * @cnt: the number of PIO buffers to cancel
+ *
+ * cancel a range of PIO buffers, used when they might be armed, but
+ * not triggered. Used at init to ensure buffer state, and also user
+ * process close, in case it died while writing to a PIO buffer
+ * Also after errors.
+ */
+void ipath_disarm_piobufs(struct ipath_devdata *dd, unsigned first,
+ unsigned cnt)
+{
+ unsigned i, last = first + cnt;
+ unsigned long flags;
+
+ ipath_cdbg(PKT, "disarm %u PIObufs first=%u\n", cnt, first);
+ for (i = first; i < last; i++) {
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ /*
+ * The disarm-related bits are write-only, so it
+ * is ok to OR them in with our copy of sendctrl
+ * while we hold the lock.
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl | INFINIPATH_S_DISARM |
+ (i << INFINIPATH_S_DISARMPIOBUF_SHIFT));
+ /* can't disarm bufs back-to-back per iba7220 spec */
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ }
+ /* on some older chips, update may not happen after cancel */
+ ipath_force_pio_avail_update(dd);
+}
+
+/**
+ * ipath_wait_linkstate - wait for an IB link state change to occur
+ * @dd: the infinipath device
+ * @state: the state to wait for
+ * @msecs: the number of milliseconds to wait
+ *
+ * wait up to msecs milliseconds for IB link state change to occur for
+ * now, take the easy polling route. Currently used only by
+ * ipath_set_linkstate. Returns 0 if state reached, otherwise
+ * -ETIMEDOUT state can have multiple states set, for any of several
+ * transitions.
+ */
+int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state, int msecs)
+{
+ dd->ipath_state_wanted = state;
+ wait_event_interruptible_timeout(ipath_state_wait,
+ (dd->ipath_flags & state),
+ msecs_to_jiffies(msecs));
+ dd->ipath_state_wanted = 0;
+
+ if (!(dd->ipath_flags & state)) {
+ u64 val;
+ ipath_cdbg(VERBOSE, "Didn't reach linkstate %s within %u"
+ " ms\n",
+ /* test INIT ahead of DOWN, both can be set */
+ (state & IPATH_LINKINIT) ? "INIT" :
+ ((state & IPATH_LINKDOWN) ? "DOWN" :
+ ((state & IPATH_LINKARMED) ? "ARM" : "ACTIVE")),
+ msecs);
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+ ipath_cdbg(VERBOSE, "ibcc=%llx ibcstatus=%llx (%s)\n",
+ (unsigned long long) ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_ibcctrl),
+ (unsigned long long) val,
+ ipath_ibcstatus_str[val & dd->ibcs_lts_mask]);
+ }
+ return (dd->ipath_flags & state) ? 0 : -ETIMEDOUT;
+}
+
+static void decode_sdma_errs(struct ipath_devdata *dd, ipath_err_t err,
+ char *buf, size_t blen)
+{
+ static const struct {
+ ipath_err_t err;
+ const char *msg;
+ } errs[] = {
+ { INFINIPATH_E_SDMAGENMISMATCH, "SDmaGenMismatch" },
+ { INFINIPATH_E_SDMAOUTOFBOUND, "SDmaOutOfBound" },
+ { INFINIPATH_E_SDMATAILOUTOFBOUND, "SDmaTailOutOfBound" },
+ { INFINIPATH_E_SDMABASE, "SDmaBase" },
+ { INFINIPATH_E_SDMA1STDESC, "SDma1stDesc" },
+ { INFINIPATH_E_SDMARPYTAG, "SDmaRpyTag" },
+ { INFINIPATH_E_SDMADWEN, "SDmaDwEn" },
+ { INFINIPATH_E_SDMAMISSINGDW, "SDmaMissingDw" },
+ { INFINIPATH_E_SDMAUNEXPDATA, "SDmaUnexpData" },
+ { INFINIPATH_E_SDMADESCADDRMISALIGN, "SDmaDescAddrMisalign" },
+ { INFINIPATH_E_SENDBUFMISUSE, "SendBufMisuse" },
+ { INFINIPATH_E_SDMADISABLED, "SDmaDisabled" },
+ };
+ int i;
+ int expected;
+ size_t bidx = 0;
+
+ for (i = 0; i < ARRAY_SIZE(errs); i++) {
+ expected = (errs[i].err != INFINIPATH_E_SDMADISABLED) ? 0 :
+ test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
+ if ((err & errs[i].err) && !expected)
+ bidx += snprintf(buf + bidx, blen - bidx,
+ "%s ", errs[i].msg);
+ }
+}
+
+/*
+ * Decode the error status into strings, deciding whether to always
+ * print * it or not depending on "normal packet errors" vs everything
+ * else. Return 1 if "real" errors, otherwise 0 if only packet
+ * errors, so caller can decide what to print with the string.
+ */
+int ipath_decode_err(struct ipath_devdata *dd, char *buf, size_t blen,
+ ipath_err_t err)
+{
+ int iserr = 1;
+ *buf = '\0';
+ if (err & INFINIPATH_E_PKTERRS) {
+ if (!(err & ~INFINIPATH_E_PKTERRS))
+ iserr = 0; // if only packet errors.
+ if (ipath_debug & __IPATH_ERRPKTDBG) {
+ if (err & INFINIPATH_E_REBP)
+ strlcat(buf, "EBP ", blen);
+ if (err & INFINIPATH_E_RVCRC)
+ strlcat(buf, "VCRC ", blen);
+ if (err & INFINIPATH_E_RICRC) {
+ strlcat(buf, "CRC ", blen);
+ // clear for check below, so only once
+ err &= INFINIPATH_E_RICRC;
+ }
+ if (err & INFINIPATH_E_RSHORTPKTLEN)
+ strlcat(buf, "rshortpktlen ", blen);
+ if (err & INFINIPATH_E_SDROPPEDDATAPKT)
+ strlcat(buf, "sdroppeddatapkt ", blen);
+ if (err & INFINIPATH_E_SPKTLEN)
+ strlcat(buf, "spktlen ", blen);
+ }
+ if ((err & INFINIPATH_E_RICRC) &&
+ !(err&(INFINIPATH_E_RVCRC|INFINIPATH_E_REBP)))
+ strlcat(buf, "CRC ", blen);
+ if (!iserr)
+ goto done;
+ }
+ if (err & INFINIPATH_E_RHDRLEN)
+ strlcat(buf, "rhdrlen ", blen);
+ if (err & INFINIPATH_E_RBADTID)
+ strlcat(buf, "rbadtid ", blen);
+ if (err & INFINIPATH_E_RBADVERSION)
+ strlcat(buf, "rbadversion ", blen);
+ if (err & INFINIPATH_E_RHDR)
+ strlcat(buf, "rhdr ", blen);
+ if (err & INFINIPATH_E_SENDSPECIALTRIGGER)
+ strlcat(buf, "sendspecialtrigger ", blen);
+ if (err & INFINIPATH_E_RLONGPKTLEN)
+ strlcat(buf, "rlongpktlen ", blen);
+ if (err & INFINIPATH_E_RMAXPKTLEN)
+ strlcat(buf, "rmaxpktlen ", blen);
+ if (err & INFINIPATH_E_RMINPKTLEN)
+ strlcat(buf, "rminpktlen ", blen);
+ if (err & INFINIPATH_E_SMINPKTLEN)
+ strlcat(buf, "sminpktlen ", blen);
+ if (err & INFINIPATH_E_RFORMATERR)
+ strlcat(buf, "rformaterr ", blen);
+ if (err & INFINIPATH_E_RUNSUPVL)
+ strlcat(buf, "runsupvl ", blen);
+ if (err & INFINIPATH_E_RUNEXPCHAR)
+ strlcat(buf, "runexpchar ", blen);
+ if (err & INFINIPATH_E_RIBFLOW)
+ strlcat(buf, "ribflow ", blen);
+ if (err & INFINIPATH_E_SUNDERRUN)
+ strlcat(buf, "sunderrun ", blen);
+ if (err & INFINIPATH_E_SPIOARMLAUNCH)
+ strlcat(buf, "spioarmlaunch ", blen);
+ if (err & INFINIPATH_E_SUNEXPERRPKTNUM)
+ strlcat(buf, "sunexperrpktnum ", blen);
+ if (err & INFINIPATH_E_SDROPPEDSMPPKT)
+ strlcat(buf, "sdroppedsmppkt ", blen);
+ if (err & INFINIPATH_E_SMAXPKTLEN)
+ strlcat(buf, "smaxpktlen ", blen);
+ if (err & INFINIPATH_E_SUNSUPVL)
+ strlcat(buf, "sunsupVL ", blen);
+ if (err & INFINIPATH_E_INVALIDADDR)
+ strlcat(buf, "invalidaddr ", blen);
+ if (err & INFINIPATH_E_RRCVEGRFULL)
+ strlcat(buf, "rcvegrfull ", blen);
+ if (err & INFINIPATH_E_RRCVHDRFULL)
+ strlcat(buf, "rcvhdrfull ", blen);
+ if (err & INFINIPATH_E_IBSTATUSCHANGED)
+ strlcat(buf, "ibcstatuschg ", blen);
+ if (err & INFINIPATH_E_RIBLOSTLINK)
+ strlcat(buf, "riblostlink ", blen);
+ if (err & INFINIPATH_E_HARDWARE)
+ strlcat(buf, "hardware ", blen);
+ if (err & INFINIPATH_E_RESET)
+ strlcat(buf, "reset ", blen);
+ if (err & INFINIPATH_E_SDMAERRS)
+ decode_sdma_errs(dd, err, buf, blen);
+ if (err & INFINIPATH_E_INVALIDEEPCMD)
+ strlcat(buf, "invalideepromcmd ", blen);
+done:
+ return iserr;
+}
+
+/**
+ * get_rhf_errstring - decode RHF errors
+ * @err: the err number
+ * @msg: the output buffer
+ * @len: the length of the output buffer
+ *
+ * only used one place now, may want more later
+ */
+static void get_rhf_errstring(u32 err, char *msg, size_t len)
+{
+ /* if no errors, and so don't need to check what's first */
+ *msg = '\0';
+
+ if (err & INFINIPATH_RHF_H_ICRCERR)
+ strlcat(msg, "icrcerr ", len);
+ if (err & INFINIPATH_RHF_H_VCRCERR)
+ strlcat(msg, "vcrcerr ", len);
+ if (err & INFINIPATH_RHF_H_PARITYERR)
+ strlcat(msg, "parityerr ", len);
+ if (err & INFINIPATH_RHF_H_LENERR)
+ strlcat(msg, "lenerr ", len);
+ if (err & INFINIPATH_RHF_H_MTUERR)
+ strlcat(msg, "mtuerr ", len);
+ if (err & INFINIPATH_RHF_H_IHDRERR)
+ /* infinipath hdr checksum error */
+ strlcat(msg, "ipathhdrerr ", len);
+ if (err & INFINIPATH_RHF_H_TIDERR)
+ strlcat(msg, "tiderr ", len);
+ if (err & INFINIPATH_RHF_H_MKERR)
+ /* bad port, offset, etc. */
+ strlcat(msg, "invalid ipathhdr ", len);
+ if (err & INFINIPATH_RHF_H_IBERR)
+ strlcat(msg, "iberr ", len);
+ if (err & INFINIPATH_RHF_L_SWA)
+ strlcat(msg, "swA ", len);
+ if (err & INFINIPATH_RHF_L_SWB)
+ strlcat(msg, "swB ", len);
+}
+
+/**
+ * ipath_get_egrbuf - get an eager buffer
+ * @dd: the infinipath device
+ * @bufnum: the eager buffer to get
+ *
+ * must only be called if ipath_pd[port] is known to be allocated
+ */
+static inline void *ipath_get_egrbuf(struct ipath_devdata *dd, u32 bufnum)
+{
+ return dd->ipath_port0_skbinfo ?
+ (void *) dd->ipath_port0_skbinfo[bufnum].skb->data : NULL;
+}
+
+/**
+ * ipath_alloc_skb - allocate an skb and buffer with possible constraints
+ * @dd: the infinipath device
+ * @gfp_mask: the sk_buff SFP mask
+ */
+struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd,
+ gfp_t gfp_mask)
+{
+ struct sk_buff *skb;
+ u32 len;
+
+ /*
+ * Only fully supported way to handle this is to allocate lots
+ * extra, align as needed, and then do skb_reserve(). That wastes
+ * a lot of memory... I'll have to hack this into infinipath_copy
+ * also.
+ */
+
+ /*
+ * We need 2 extra bytes for ipath_ether data sent in the
+ * key header. In order to keep everything dword aligned,
+ * we'll reserve 4 bytes.
+ */
+ len = dd->ipath_ibmaxlen + 4;
+
+ if (dd->ipath_flags & IPATH_4BYTE_TID) {
+ /* We need a 2KB multiple alignment, and there is no way
+ * to do it except to allocate extra and then skb_reserve
+ * enough to bring it up to the right alignment.
+ */
+ len += 2047;
+ }
+
+ skb = __dev_alloc_skb(len, gfp_mask);
+ if (!skb) {
+ ipath_dev_err(dd, "Failed to allocate skbuff, length %u\n",
+ len);
+ goto bail;
+ }
+
+ skb_reserve(skb, 4);
+
+ if (dd->ipath_flags & IPATH_4BYTE_TID) {
+ u32 una = (unsigned long)skb->data & 2047;
+ if (una)
+ skb_reserve(skb, 2048 - una);
+ }
+
+bail:
+ return skb;
+}
+
+static void ipath_rcv_hdrerr(struct ipath_devdata *dd,
+ u32 eflags,
+ u32 l,
+ u32 etail,
+ __le32 *rhf_addr,
+ struct ipath_message_header *hdr)
+{
+ char emsg[128];
+
+ get_rhf_errstring(eflags, emsg, sizeof emsg);
+ ipath_cdbg(PKT, "RHFerrs %x hdrqtail=%x typ=%u "
+ "tlen=%x opcode=%x egridx=%x: %s\n",
+ eflags, l,
+ ipath_hdrget_rcv_type(rhf_addr),
+ ipath_hdrget_length_in_bytes(rhf_addr),
+ be32_to_cpu(hdr->bth[0]) >> 24,
+ etail, emsg);
+
+ /* Count local link integrity errors. */
+ if (eflags & (INFINIPATH_RHF_H_ICRCERR | INFINIPATH_RHF_H_VCRCERR)) {
+ u8 n = (dd->ipath_ibcctrl >>
+ INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
+ INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
+
+ if (++dd->ipath_lli_counter > n) {
+ dd->ipath_lli_counter = 0;
+ dd->ipath_lli_errors++;
+ }
+ }
+}
+
+/*
+ * ipath_kreceive - receive a packet
+ * @pd: the infinipath port
+ *
+ * called from interrupt handler for errors or receive interrupt
+ */
+void ipath_kreceive(struct ipath_portdata *pd)
+{
+ struct ipath_devdata *dd = pd->port_dd;
+ __le32 *rhf_addr;
+ void *ebuf;
+ const u32 rsize = dd->ipath_rcvhdrentsize; /* words */
+ const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */
+ u32 etail = -1, l, hdrqtail;
+ struct ipath_message_header *hdr;
+ u32 eflags, i, etype, tlen, pkttot = 0, updegr = 0, reloop = 0;
+ static u64 totcalls; /* stats, may eventually remove */
+ int last;
+
+ l = pd->port_head;
+ rhf_addr = (__le32 *) pd->port_rcvhdrq + l + dd->ipath_rhf_offset;
+ if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
+ u32 seq = ipath_hdrget_seq(rhf_addr);
+
+ if (seq != pd->port_seq_cnt)
+ goto bail;
+ hdrqtail = 0;
+ } else {
+ hdrqtail = ipath_get_rcvhdrtail(pd);
+ if (l == hdrqtail)
+ goto bail;
+ smp_rmb();
+ }
+
+reloop:
+ for (last = 0, i = 1; !last; i += !last) {
+ hdr = dd->ipath_f_get_msgheader(dd, rhf_addr);
+ eflags = ipath_hdrget_err_flags(rhf_addr);
+ etype = ipath_hdrget_rcv_type(rhf_addr);
+ /* total length */
+ tlen = ipath_hdrget_length_in_bytes(rhf_addr);
+ ebuf = NULL;
+ if ((dd->ipath_flags & IPATH_NODMA_RTAIL) ?
+ ipath_hdrget_use_egr_buf(rhf_addr) :
+ (etype != RCVHQ_RCV_TYPE_EXPECTED)) {
+ /*
+ * It turns out that the chip uses an eager buffer
+ * for all non-expected packets, whether it "needs"
+ * one or not. So always get the index, but don't
+ * set ebuf (so we try to copy data) unless the
+ * length requires it.
+ */
+ etail = ipath_hdrget_index(rhf_addr);
+ updegr = 1;
+ if (tlen > sizeof(*hdr) ||
+ etype == RCVHQ_RCV_TYPE_NON_KD)
+ ebuf = ipath_get_egrbuf(dd, etail);
+ }
+
+ /*
+ * both tiderr and ipathhdrerr are set for all plain IB
+ * packets; only ipathhdrerr should be set.
+ */
+
+ if (etype != RCVHQ_RCV_TYPE_NON_KD &&
+ etype != RCVHQ_RCV_TYPE_ERROR &&
+ ipath_hdrget_ipath_ver(hdr->iph.ver_port_tid_offset) !=
+ IPS_PROTO_VERSION)
+ ipath_cdbg(PKT, "Bad InfiniPath protocol version "
+ "%x\n", etype);
+
+ if (unlikely(eflags))
+ ipath_rcv_hdrerr(dd, eflags, l, etail, rhf_addr, hdr);
+ else if (etype == RCVHQ_RCV_TYPE_NON_KD) {
+ ipath_ib_rcv(dd->verbs_dev, (u32 *)hdr, ebuf, tlen);
+ if (dd->ipath_lli_counter)
+ dd->ipath_lli_counter--;
+ } else if (etype == RCVHQ_RCV_TYPE_EAGER) {
+ u8 opcode = be32_to_cpu(hdr->bth[0]) >> 24;
+ u32 qp = be32_to_cpu(hdr->bth[1]) & 0xffffff;
+ ipath_cdbg(PKT, "typ %x, opcode %x (eager, "
+ "qp=%x), len %x; ignored\n",
+ etype, opcode, qp, tlen);
+ }
+ else if (etype == RCVHQ_RCV_TYPE_EXPECTED)
+ ipath_dbg("Bug: Expected TID, opcode %x; ignored\n",
+ be32_to_cpu(hdr->bth[0]) >> 24);
+ else {
+ /*
+ * error packet, type of error unknown.
+ * Probably type 3, but we don't know, so don't
+ * even try to print the opcode, etc.
+ * Usually caused by a "bad packet", that has no
+ * BTH, when the LRH says it should.
+ */
+ ipath_cdbg(ERRPKT, "Error Pkt, but no eflags! egrbuf"
+ " %x, len %x hdrq+%x rhf: %Lx\n",
+ etail, tlen, l, (unsigned long long)
+ le64_to_cpu(*(__le64 *) rhf_addr));
+ if (ipath_debug & __IPATH_ERRPKTDBG) {
+ u32 j, *d, dw = rsize-2;
+ if (rsize > (tlen>>2))
+ dw = tlen>>2;
+ d = (u32 *)hdr;
+ printk(KERN_DEBUG "EPkt rcvhdr(%x dw):\n",
+ dw);
+ for (j = 0; j < dw; j++)
+ printk(KERN_DEBUG "%8x%s", d[j],
+ (j%8) == 7 ? "\n" : " ");
+ printk(KERN_DEBUG ".\n");
+ }
+ }
+ l += rsize;
+ if (l >= maxcnt)
+ l = 0;
+ rhf_addr = (__le32 *) pd->port_rcvhdrq +
+ l + dd->ipath_rhf_offset;
+ if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
+ u32 seq = ipath_hdrget_seq(rhf_addr);
+
+ if (++pd->port_seq_cnt > 13)
+ pd->port_seq_cnt = 1;
+ if (seq != pd->port_seq_cnt)
+ last = 1;
+ } else if (l == hdrqtail)
+ last = 1;
+ /*
+ * update head regs on last packet, and every 16 packets.
+ * Reduce bus traffic, while still trying to prevent
+ * rcvhdrq overflows, for when the queue is nearly full
+ */
+ if (last || !(i & 0xf)) {
+ u64 lval = l;
+
+ /* request IBA6120 and 7220 interrupt only on last */
+ if (last)
+ lval |= dd->ipath_rhdrhead_intr_off;
+ ipath_write_ureg(dd, ur_rcvhdrhead, lval,
+ pd->port_port);
+ if (updegr) {
+ ipath_write_ureg(dd, ur_rcvegrindexhead,
+ etail, pd->port_port);
+ updegr = 0;
+ }
+ }
+ }
+
+ if (!dd->ipath_rhdrhead_intr_off && !reloop &&
+ !(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
+ /* IBA6110 workaround; we can have a race clearing chip
+ * interrupt with another interrupt about to be delivered,
+ * and can clear it before it is delivered on the GPIO
+ * workaround. By doing the extra check here for the
+ * in-memory tail register updating while we were doing
+ * earlier packets, we "almost" guarantee we have covered
+ * that case.
+ */
+ u32 hqtail = ipath_get_rcvhdrtail(pd);
+ if (hqtail != hdrqtail) {
+ hdrqtail = hqtail;
+ reloop = 1; /* loop 1 extra time at most */
+ goto reloop;
+ }
+ }
+
+ pkttot += i;
+
+ pd->port_head = l;
+
+ if (pkttot > ipath_stats.sps_maxpkts_call)
+ ipath_stats.sps_maxpkts_call = pkttot;
+ ipath_stats.sps_port0pkts += pkttot;
+ ipath_stats.sps_avgpkts_call =
+ ipath_stats.sps_port0pkts / ++totcalls;
+
+bail:;
+}
+
+/**
+ * ipath_update_pio_bufs - update shadow copy of the PIO availability map
+ * @dd: the infinipath device
+ *
+ * called whenever our local copy indicates we have run out of send buffers
+ * NOTE: This can be called from interrupt context by some code
+ * and from non-interrupt context by ipath_getpiobuf().
+ */
+
+static void ipath_update_pio_bufs(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+ int i;
+ const unsigned piobregs = (unsigned)dd->ipath_pioavregs;
+
+ /* If the generation (check) bits have changed, then we update the
+ * busy bit for the corresponding PIO buffer. This algorithm will
+ * modify positions to the value they already have in some cases
+ * (i.e., no change), but it's faster than changing only the bits
+ * that have changed.
+ *
+ * We would like to do this atomicly, to avoid spinlocks in the
+ * critical send path, but that's not really possible, given the
+ * type of changes, and that this routine could be called on
+ * multiple cpu's simultaneously, so we lock in this routine only,
+ * to avoid conflicting updates; all we change is the shadow, and
+ * it's a single 64 bit memory location, so by definition the update
+ * is atomic in terms of what other cpu's can see in testing the
+ * bits. The spin_lock overhead isn't too bad, since it only
+ * happens when all buffers are in use, so only cpu overhead, not
+ * latency or bandwidth is affected.
+ */
+ if (!dd->ipath_pioavailregs_dma) {
+ ipath_dbg("Update shadow pioavail, but regs_dma NULL!\n");
+ return;
+ }
+ if (ipath_debug & __IPATH_VERBDBG) {
+ /* only if packet debug and verbose */
+ volatile __le64 *dma = dd->ipath_pioavailregs_dma;
+ unsigned long *shadow = dd->ipath_pioavailshadow;
+
+ ipath_cdbg(PKT, "Refill avail, dma0=%llx shad0=%lx, "
+ "d1=%llx s1=%lx, d2=%llx s2=%lx, d3=%llx "
+ "s3=%lx\n",
+ (unsigned long long) le64_to_cpu(dma[0]),
+ shadow[0],
+ (unsigned long long) le64_to_cpu(dma[1]),
+ shadow[1],
+ (unsigned long long) le64_to_cpu(dma[2]),
+ shadow[2],
+ (unsigned long long) le64_to_cpu(dma[3]),
+ shadow[3]);
+ if (piobregs > 4)
+ ipath_cdbg(
+ PKT, "2nd group, dma4=%llx shad4=%lx, "
+ "d5=%llx s5=%lx, d6=%llx s6=%lx, "
+ "d7=%llx s7=%lx\n",
+ (unsigned long long) le64_to_cpu(dma[4]),
+ shadow[4],
+ (unsigned long long) le64_to_cpu(dma[5]),
+ shadow[5],
+ (unsigned long long) le64_to_cpu(dma[6]),
+ shadow[6],
+ (unsigned long long) le64_to_cpu(dma[7]),
+ shadow[7]);
+ }
+ spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ for (i = 0; i < piobregs; i++) {
+ u64 pchbusy, pchg, piov, pnew;
+ /*
+ * Chip Errata: bug 6641; even and odd qwords>3 are swapped
+ */
+ if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS))
+ piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i ^ 1]);
+ else
+ piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i]);
+ pchg = dd->ipath_pioavailkernel[i] &
+ ~(dd->ipath_pioavailshadow[i] ^ piov);
+ pchbusy = pchg << INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT;
+ if (pchg && (pchbusy & dd->ipath_pioavailshadow[i])) {
+ pnew = dd->ipath_pioavailshadow[i] & ~pchbusy;
+ pnew |= piov & pchbusy;
+ dd->ipath_pioavailshadow[i] = pnew;
+ }
+ }
+ spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+}
+
+/*
+ * used to force update of pioavailshadow if we can't get a pio buffer.
+ * Needed primarily due to exitting freeze mode after recovering
+ * from errors. Done lazily, because it's safer (known to not
+ * be writing pio buffers).
+ */
+static void ipath_reset_availshadow(struct ipath_devdata *dd)
+{
+ int i, im;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ for (i = 0; i < dd->ipath_pioavregs; i++) {
+ u64 val, oldval;
+ /* deal with 6110 chip bug on high register #s */
+ im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
+ i ^ 1 : i;
+ val = le64_to_cpu(dd->ipath_pioavailregs_dma[im]);
+ /*
+ * busy out the buffers not in the kernel avail list,
+ * without changing the generation bits.
+ */
+ oldval = dd->ipath_pioavailshadow[i];
+ dd->ipath_pioavailshadow[i] = val |
+ ((~dd->ipath_pioavailkernel[i] <<
+ INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT) &
+ 0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */
+ if (oldval != dd->ipath_pioavailshadow[i])
+ ipath_dbg("shadow[%d] was %Lx, now %lx\n",
+ i, (unsigned long long) oldval,
+ dd->ipath_pioavailshadow[i]);
+ }
+ spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+}
+
+/**
+ * ipath_setrcvhdrsize - set the receive header size
+ * @dd: the infinipath device
+ * @rhdrsize: the receive header size
+ *
+ * called from user init code, and also layered driver init
+ */
+int ipath_setrcvhdrsize(struct ipath_devdata *dd, unsigned rhdrsize)
+{
+ int ret = 0;
+
+ if (dd->ipath_flags & IPATH_RCVHDRSZ_SET) {
+ if (dd->ipath_rcvhdrsize != rhdrsize) {
+ dev_info(&dd->pcidev->dev,
+ "Error: can't set protocol header "
+ "size %u, already %u\n",
+ rhdrsize, dd->ipath_rcvhdrsize);
+ ret = -EAGAIN;
+ } else
+ ipath_cdbg(VERBOSE, "Reuse same protocol header "
+ "size %u\n", dd->ipath_rcvhdrsize);
+ } else if (rhdrsize > (dd->ipath_rcvhdrentsize -
+ (sizeof(u64) / sizeof(u32)))) {
+ ipath_dbg("Error: can't set protocol header size %u "
+ "(> max %u)\n", rhdrsize,
+ dd->ipath_rcvhdrentsize -
+ (u32) (sizeof(u64) / sizeof(u32)));
+ ret = -EOVERFLOW;
+ } else {
+ dd->ipath_flags |= IPATH_RCVHDRSZ_SET;
+ dd->ipath_rcvhdrsize = rhdrsize;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
+ dd->ipath_rcvhdrsize);
+ ipath_cdbg(VERBOSE, "Set protocol header size to %u\n",
+ dd->ipath_rcvhdrsize);
+ }
+ return ret;
+}
+
+/*
+ * debugging code and stats updates if no pio buffers available.
+ */
+static noinline void no_pio_bufs(struct ipath_devdata *dd)
+{
+ unsigned long *shadow = dd->ipath_pioavailshadow;
+ __le64 *dma = (__le64 *)dd->ipath_pioavailregs_dma;
+
+ dd->ipath_upd_pio_shadow = 1;
+
+ /*
+ * not atomic, but if we lose a stat count in a while, that's OK
+ */
+ ipath_stats.sps_nopiobufs++;
+ if (!(++dd->ipath_consec_nopiobuf % 100000)) {
+ ipath_force_pio_avail_update(dd); /* at start */
+ ipath_dbg("%u tries no piobufavail ts%lx; dmacopy: "
+ "%llx %llx %llx %llx\n"
+ "ipath shadow: %lx %lx %lx %lx\n",
+ dd->ipath_consec_nopiobuf,
+ (unsigned long)get_cycles(),
+ (unsigned long long) le64_to_cpu(dma[0]),
+ (unsigned long long) le64_to_cpu(dma[1]),
+ (unsigned long long) le64_to_cpu(dma[2]),
+ (unsigned long long) le64_to_cpu(dma[3]),
+ shadow[0], shadow[1], shadow[2], shadow[3]);
+ /*
+ * 4 buffers per byte, 4 registers above, cover rest
+ * below
+ */
+ if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) >
+ (sizeof(shadow[0]) * 4 * 4))
+ ipath_dbg("2nd group: dmacopy: "
+ "%llx %llx %llx %llx\n"
+ "ipath shadow: %lx %lx %lx %lx\n",
+ (unsigned long long)le64_to_cpu(dma[4]),
+ (unsigned long long)le64_to_cpu(dma[5]),
+ (unsigned long long)le64_to_cpu(dma[6]),
+ (unsigned long long)le64_to_cpu(dma[7]),
+ shadow[4], shadow[5], shadow[6], shadow[7]);
+
+ /* at end, so update likely happened */
+ ipath_reset_availshadow(dd);
+ }
+}
+
+/*
+ * common code for normal driver pio buffer allocation, and reserved
+ * allocation.
+ *
+ * do appropriate marking as busy, etc.
+ * returns buffer number if one found (>=0), negative number is error.
+ */
+static u32 __iomem *ipath_getpiobuf_range(struct ipath_devdata *dd,
+ u32 *pbufnum, u32 first, u32 last, u32 firsti)
+{
+ int i, j, updated = 0;
+ unsigned piobcnt;
+ unsigned long flags;
+ unsigned long *shadow = dd->ipath_pioavailshadow;
+ u32 __iomem *buf;
+
+ piobcnt = last - first;
+ if (dd->ipath_upd_pio_shadow) {
+ /*
+ * Minor optimization. If we had no buffers on last call,
+ * start out by doing the update; continue and do scan even
+ * if no buffers were updated, to be paranoid
+ */
+ ipath_update_pio_bufs(dd);
+ updated++;
+ i = first;
+ } else
+ i = firsti;
+rescan:
+ /*
+ * while test_and_set_bit() is atomic, we do that and then the
+ * change_bit(), and the pair is not. See if this is the cause
+ * of the remaining armlaunch errors.
+ */
+ spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ for (j = 0; j < piobcnt; j++, i++) {
+ if (i >= last)
+ i = first;
+ if (__test_and_set_bit((2 * i) + 1, shadow))
+ continue;
+ /* flip generation bit */
+ __change_bit(2 * i, shadow);
+ break;
+ }
+ spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+
+ if (j == piobcnt) {
+ if (!updated) {
+ /*
+ * first time through; shadow exhausted, but may be
+ * buffers available, try an update and then rescan.
+ */
+ ipath_update_pio_bufs(dd);
+ updated++;
+ i = first;
+ goto rescan;
+ } else if (updated == 1 && piobcnt <=
+ ((dd->ipath_sendctrl
+ >> INFINIPATH_S_UPDTHRESH_SHIFT) &
+ INFINIPATH_S_UPDTHRESH_MASK)) {
+ /*
+ * for chips supporting and using the update
+ * threshold we need to force an update of the
+ * in-memory copy if the count is less than the
+ * thershold, then check one more time.
+ */
+ ipath_force_pio_avail_update(dd);
+ ipath_update_pio_bufs(dd);
+ updated++;
+ i = first;
+ goto rescan;
+ }
+
+ no_pio_bufs(dd);
+ buf = NULL;
+ } else {
+ if (i < dd->ipath_piobcnt2k)
+ buf = (u32 __iomem *) (dd->ipath_pio2kbase +
+ i * dd->ipath_palign);
+ else
+ buf = (u32 __iomem *)
+ (dd->ipath_pio4kbase +
+ (i - dd->ipath_piobcnt2k) * dd->ipath_4kalign);
+ if (pbufnum)
+ *pbufnum = i;
+ }
+
+ return buf;
+}
+
+/**
+ * ipath_getpiobuf - find an available pio buffer
+ * @dd: the infinipath device
+ * @plen: the size of the PIO buffer needed in 32-bit words
+ * @pbufnum: the buffer number is placed here
+ */
+u32 __iomem *ipath_getpiobuf(struct ipath_devdata *dd, u32 plen, u32 *pbufnum)
+{
+ u32 __iomem *buf;
+ u32 pnum, nbufs;
+ u32 first, lasti;
+
+ if (plen + 1 >= IPATH_SMALLBUF_DWORDS) {
+ first = dd->ipath_piobcnt2k;
+ lasti = dd->ipath_lastpioindexl;
+ } else {
+ first = 0;
+ lasti = dd->ipath_lastpioindex;
+ }
+ nbufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
+ buf = ipath_getpiobuf_range(dd, &pnum, first, nbufs, lasti);
+
+ if (buf) {
+ /*
+ * Set next starting place. It's just an optimization,
+ * it doesn't matter who wins on this, so no locking
+ */
+ if (plen + 1 >= IPATH_SMALLBUF_DWORDS)
+ dd->ipath_lastpioindexl = pnum + 1;
+ else
+ dd->ipath_lastpioindex = pnum + 1;
+ if (dd->ipath_upd_pio_shadow)
+ dd->ipath_upd_pio_shadow = 0;
+ if (dd->ipath_consec_nopiobuf)
+ dd->ipath_consec_nopiobuf = 0;
+ ipath_cdbg(VERBOSE, "Return piobuf%u %uk @ %p\n",
+ pnum, (pnum < dd->ipath_piobcnt2k) ? 2 : 4, buf);
+ if (pbufnum)
+ *pbufnum = pnum;
+
+ }
+ return buf;
+}
+
+/**
+ * ipath_chg_pioavailkernel - change which send buffers are available for kernel
+ * @dd: the infinipath device
+ * @start: the starting send buffer number
+ * @len: the number of send buffers
+ * @avail: true if the buffers are available for kernel use, false otherwise
+ */
+void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
+ unsigned len, int avail)
+{
+ unsigned long flags;
+ unsigned end, cnt = 0;
+
+ /* There are two bits per send buffer (busy and generation) */
+ start *= 2;
+ end = start + len * 2;
+
+ spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ /* Set or clear the busy bit in the shadow. */
+ while (start < end) {
+ if (avail) {
+ unsigned long dma;
+ int i, im;
+ /*
+ * the BUSY bit will never be set, because we disarm
+ * the user buffers before we hand them back to the
+ * kernel. We do have to make sure the generation
+ * bit is set correctly in shadow, since it could
+ * have changed many times while allocated to user.
+ * We can't use the bitmap functions on the full
+ * dma array because it is always little-endian, so
+ * we have to flip to host-order first.
+ * BITS_PER_LONG is slightly wrong, since it's
+ * always 64 bits per register in chip...
+ * We only work on 64 bit kernels, so that's OK.
+ */
+ /* deal with 6110 chip bug on high register #s */
+ i = start / BITS_PER_LONG;
+ im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
+ i ^ 1 : i;
+ __clear_bit(INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT
+ + start, dd->ipath_pioavailshadow);
+ dma = (unsigned long) le64_to_cpu(
+ dd->ipath_pioavailregs_dma[im]);
+ if (test_bit((INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
+ + start) % BITS_PER_LONG, &dma))
+ __set_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
+ + start, dd->ipath_pioavailshadow);
+ else
+ __clear_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
+ + start, dd->ipath_pioavailshadow);
+ __set_bit(start, dd->ipath_pioavailkernel);
+ } else {
+ __set_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT,
+ dd->ipath_pioavailshadow);
+ __clear_bit(start, dd->ipath_pioavailkernel);
+ }
+ start += 2;
+ }
+
+ if (dd->ipath_pioupd_thresh) {
+ end = 2 * (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
+ cnt = bitmap_weight(dd->ipath_pioavailkernel, end);
+ }
+ spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+
+ /*
+ * When moving buffers from kernel to user, if number assigned to
+ * the user is less than the pio update threshold, and threshold
+ * is supported (cnt was computed > 0), drop the update threshold
+ * so we update at least once per allocated number of buffers.
+ * In any case, if the kernel buffers are less than the threshold,
+ * drop the threshold. We don't bother increasing it, having once
+ * decreased it, since it would typically just cycle back and forth.
+ * If we don't decrease below buffers in use, we can wait a long
+ * time for an update, until some other context uses PIO buffers.
+ */
+ if (!avail && len < cnt)
+ cnt = len;
+ if (cnt < dd->ipath_pioupd_thresh) {
+ dd->ipath_pioupd_thresh = cnt;
+ ipath_dbg("Decreased pio update threshold to %u\n",
+ dd->ipath_pioupd_thresh);
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~(INFINIPATH_S_UPDTHRESH_MASK
+ << INFINIPATH_S_UPDTHRESH_SHIFT);
+ dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
+ << INFINIPATH_S_UPDTHRESH_SHIFT;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ }
+}
+
+/**
+ * ipath_create_rcvhdrq - create a receive header queue
+ * @dd: the infinipath device
+ * @pd: the port data
+ *
+ * this must be contiguous memory (from an i/o perspective), and must be
+ * DMA'able (which means for some systems, it will go through an IOMMU,
+ * or be forced into a low address range).
+ */
+int ipath_create_rcvhdrq(struct ipath_devdata *dd,
+ struct ipath_portdata *pd)
+{
+ int ret = 0;
+
+ if (!pd->port_rcvhdrq) {
+ dma_addr_t phys_hdrqtail;
+ gfp_t gfp_flags = GFP_USER | __GFP_COMP;
+ int amt = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
+ sizeof(u32), PAGE_SIZE);
+
+ pd->port_rcvhdrq = dma_alloc_coherent(
+ &dd->pcidev->dev, amt, &pd->port_rcvhdrq_phys,
+ gfp_flags);
+
+ if (!pd->port_rcvhdrq) {
+ ipath_dev_err(dd, "attempt to allocate %d bytes "
+ "for port %u rcvhdrq failed\n",
+ amt, pd->port_port);
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ if (!(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
+ pd->port_rcvhdrtail_kvaddr = dma_alloc_coherent(
+ &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail,
+ GFP_KERNEL);
+ if (!pd->port_rcvhdrtail_kvaddr) {
+ ipath_dev_err(dd, "attempt to allocate 1 page "
+ "for port %u rcvhdrqtailaddr "
+ "failed\n", pd->port_port);
+ ret = -ENOMEM;
+ dma_free_coherent(&dd->pcidev->dev, amt,
+ pd->port_rcvhdrq,
+ pd->port_rcvhdrq_phys);
+ pd->port_rcvhdrq = NULL;
+ goto bail;
+ }
+ pd->port_rcvhdrqtailaddr_phys = phys_hdrqtail;
+ ipath_cdbg(VERBOSE, "port %d hdrtailaddr, %llx "
+ "physical\n", pd->port_port,
+ (unsigned long long) phys_hdrqtail);
+ }
+
+ pd->port_rcvhdrq_size = amt;
+
+ ipath_cdbg(VERBOSE, "%d pages at %p (phys %lx) size=%lu "
+ "for port %u rcvhdr Q\n",
+ amt >> PAGE_SHIFT, pd->port_rcvhdrq,
+ (unsigned long) pd->port_rcvhdrq_phys,
+ (unsigned long) pd->port_rcvhdrq_size,
+ pd->port_port);
+ }
+ else
+ ipath_cdbg(VERBOSE, "reuse port %d rcvhdrq @%p %llx phys; "
+ "hdrtailaddr@%p %llx physical\n",
+ pd->port_port, pd->port_rcvhdrq,
+ (unsigned long long) pd->port_rcvhdrq_phys,
+ pd->port_rcvhdrtail_kvaddr, (unsigned long long)
+ pd->port_rcvhdrqtailaddr_phys);
+
+ /* clear for security and sanity on each use */
+ memset(pd->port_rcvhdrq, 0, pd->port_rcvhdrq_size);
+ if (pd->port_rcvhdrtail_kvaddr)
+ memset(pd->port_rcvhdrtail_kvaddr, 0, PAGE_SIZE);
+
+ /*
+ * tell chip each time we init it, even if we are re-using previous
+ * memory (we zero the register at process close)
+ */
+ ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
+ pd->port_port, pd->port_rcvhdrqtailaddr_phys);
+ ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
+ pd->port_port, pd->port_rcvhdrq_phys);
+
+bail:
+ return ret;
+}
+
+
+/*
+ * Flush all sends that might be in the ready to send state, as well as any
+ * that are in the process of being sent. Used whenever we need to be
+ * sure the send side is idle. Cleans up all buffer state by canceling
+ * all pio buffers, and issuing an abort, which cleans up anything in the
+ * launch fifo. The cancel is superfluous on some chip versions, but
+ * it's safer to always do it.
+ * PIOAvail bits are updated by the chip as if normal send had happened.
+ */
+void ipath_cancel_sends(struct ipath_devdata *dd, int restore_sendctrl)
+{
+ unsigned long flags;
+
+ if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) {
+ ipath_cdbg(VERBOSE, "Ignore while in autonegotiation\n");
+ goto bail;
+ }
+ /*
+ * If we have SDMA, and it's not disabled, we have to kick off the
+ * abort state machine, provided we aren't already aborting.
+ * If we are in the process of aborting SDMA (!DISABLED, but ABORTING),
+ * we skip the rest of this routine. It is already "in progress"
+ */
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA) {
+ int skip_cancel;
+ unsigned long *statp = &dd->ipath_sdma_status;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ skip_cancel =
+ test_and_set_bit(IPATH_SDMA_ABORTING, statp)
+ && !test_bit(IPATH_SDMA_DISABLED, statp);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ if (skip_cancel)
+ goto bail;
+ }
+
+ ipath_dbg("Cancelling all in-progress send buffers\n");
+
+ /* skip armlaunch errs for a while */
+ dd->ipath_lastcancel = jiffies + HZ / 2;
+
+ /*
+ * The abort bit is auto-clearing. We also don't want pioavail
+ * update happening during this, and we don't want any other
+ * sends going out, so turn those off for the duration. We read
+ * the scratch register to be sure that cancels and the abort
+ * have taken effect in the chip. Otherwise two parts are same
+ * as ipath_force_pio_avail_update()
+ */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~(INFINIPATH_S_PIOBUFAVAILUPD
+ | INFINIPATH_S_PIOENABLE);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl | INFINIPATH_S_ABORT);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ /* disarm all send buffers */
+ ipath_disarm_piobufs(dd, 0,
+ dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
+
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ set_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status);
+
+ if (restore_sendctrl) {
+ /* else done by caller later if needed */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl |= INFINIPATH_S_PIOBUFAVAILUPD |
+ INFINIPATH_S_PIOENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ /* and again, be sure all have hit the chip */
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ }
+
+ if ((dd->ipath_flags & IPATH_HAS_SEND_DMA) &&
+ !test_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status) &&
+ test_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status)) {
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ /* only wait so long for intr */
+ dd->ipath_sdma_abort_intr_timeout = jiffies + HZ;
+ dd->ipath_sdma_reset_wait = 200;
+ if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ }
+bail:;
+}
+
+/*
+ * Force an update of in-memory copy of the pioavail registers, when
+ * needed for any of a variety of reasons. We read the scratch register
+ * to make it highly likely that the update will have happened by the
+ * time we return. If already off (as in cancel_sends above), this
+ * routine is a nop, on the assumption that the caller will "do the
+ * right thing".
+ */
+void ipath_force_pio_avail_update(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ if (dd->ipath_sendctrl & INFINIPATH_S_PIOBUFAVAILUPD) {
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl & ~INFINIPATH_S_PIOBUFAVAILUPD);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ }
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+}
+
+static void ipath_set_ib_lstate(struct ipath_devdata *dd, int linkcmd,
+ int linitcmd)
+{
+ u64 mod_wd;
+ static const char *what[4] = {
+ [0] = "NOP",
+ [INFINIPATH_IBCC_LINKCMD_DOWN] = "DOWN",
+ [INFINIPATH_IBCC_LINKCMD_ARMED] = "ARMED",
+ [INFINIPATH_IBCC_LINKCMD_ACTIVE] = "ACTIVE"
+ };
+
+ if (linitcmd == INFINIPATH_IBCC_LINKINITCMD_DISABLE) {
+ /*
+ * If we are told to disable, note that so link-recovery
+ * code does not attempt to bring us back up.
+ */
+ preempt_disable();
+ dd->ipath_flags |= IPATH_IB_LINK_DISABLED;
+ preempt_enable();
+ } else if (linitcmd) {
+ /*
+ * Any other linkinitcmd will lead to LINKDOWN and then
+ * to INIT (if all is well), so clear flag to let
+ * link-recovery code attempt to bring us back up.
+ */
+ preempt_disable();
+ dd->ipath_flags &= ~IPATH_IB_LINK_DISABLED;
+ preempt_enable();
+ }
+
+ mod_wd = (linkcmd << dd->ibcc_lc_shift) |
+ (linitcmd << INFINIPATH_IBCC_LINKINITCMD_SHIFT);
+ ipath_cdbg(VERBOSE,
+ "Moving unit %u to %s (initcmd=0x%x), current ltstate is %s\n",
+ dd->ipath_unit, what[linkcmd], linitcmd,
+ ipath_ibcstatus_str[ipath_ib_linktrstate(dd,
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus))]);
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
+ dd->ipath_ibcctrl | mod_wd);
+ /* read from chip so write is flushed */
+ (void) ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+}
+
+int ipath_set_linkstate(struct ipath_devdata *dd, u8 newstate)
+{
+ u32 lstate;
+ int ret;
+
+ switch (newstate) {
+ case IPATH_IB_LINKDOWN_ONLY:
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN, 0);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINKDOWN:
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
+ INFINIPATH_IBCC_LINKINITCMD_POLL);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINKDOWN_SLEEP:
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
+ INFINIPATH_IBCC_LINKINITCMD_SLEEP);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINKDOWN_DISABLE:
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
+ INFINIPATH_IBCC_LINKINITCMD_DISABLE);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINKARM:
+ if (dd->ipath_flags & IPATH_LINKARMED) {
+ ret = 0;
+ goto bail;
+ }
+ if (!(dd->ipath_flags &
+ (IPATH_LINKINIT | IPATH_LINKACTIVE))) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ARMED, 0);
+
+ /*
+ * Since the port can transition to ACTIVE by receiving
+ * a non VL 15 packet, wait for either state.
+ */
+ lstate = IPATH_LINKARMED | IPATH_LINKACTIVE;
+ break;
+
+ case IPATH_IB_LINKACTIVE:
+ if (dd->ipath_flags & IPATH_LINKACTIVE) {
+ ret = 0;
+ goto bail;
+ }
+ if (!(dd->ipath_flags & IPATH_LINKARMED)) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ACTIVE, 0);
+ lstate = IPATH_LINKACTIVE;
+ break;
+
+ case IPATH_IB_LINK_LOOPBACK:
+ dev_info(&dd->pcidev->dev, "Enabling IB local loopback\n");
+ dd->ipath_ibcctrl |= INFINIPATH_IBCC_LOOPBACK;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
+ dd->ipath_ibcctrl);
+
+ /* turn heartbeat off, as it causes loopback to fail */
+ dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
+ IPATH_IB_HRTBT_OFF);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINK_EXTERNAL:
+ dev_info(&dd->pcidev->dev,
+ "Disabling IB local loopback (normal)\n");
+ dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
+ IPATH_IB_HRTBT_ON);
+ dd->ipath_ibcctrl &= ~INFINIPATH_IBCC_LOOPBACK;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
+ dd->ipath_ibcctrl);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ /*
+ * Heartbeat can be explicitly enabled by the user via
+ * "hrtbt_enable" "file", and if disabled, trying to enable here
+ * will have no effect. Implicit changes (heartbeat off when
+ * loopback on, and vice versa) are included to ease testing.
+ */
+ case IPATH_IB_LINK_HRTBT:
+ ret = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
+ IPATH_IB_HRTBT_ON);
+ goto bail;
+
+ case IPATH_IB_LINK_NO_HRTBT:
+ ret = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
+ IPATH_IB_HRTBT_OFF);
+ goto bail;
+
+ default:
+ ipath_dbg("Invalid linkstate 0x%x requested\n", newstate);
+ ret = -EINVAL;
+ goto bail;
+ }
+ ret = ipath_wait_linkstate(dd, lstate, 2000);
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_set_mtu - set the MTU
+ * @dd: the infinipath device
+ * @arg: the new MTU
+ *
+ * we can handle "any" incoming size, the issue here is whether we
+ * need to restrict our outgoing size. For now, we don't do any
+ * sanity checking on this, and we don't deal with what happens to
+ * programs that are already running when the size changes.
+ * NOTE: changing the MTU will usually cause the IBC to go back to
+ * link INIT state...
+ */
+int ipath_set_mtu(struct ipath_devdata *dd, u16 arg)
+{
+ u32 piosize;
+ int changed = 0;
+ int ret;
+
+ /*
+ * mtu is IB data payload max. It's the largest power of 2 less
+ * than piosize (or even larger, since it only really controls the
+ * largest we can receive; we can send the max of the mtu and
+ * piosize). We check that it's one of the valid IB sizes.
+ */
+ if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 &&
+ (arg != 4096 || !ipath_mtu4096)) {
+ ipath_dbg("Trying to set invalid mtu %u, failing\n", arg);
+ ret = -EINVAL;
+ goto bail;
+ }
+ if (dd->ipath_ibmtu == arg) {
+ ret = 0; /* same as current */
+ goto bail;
+ }
+
+ piosize = dd->ipath_ibmaxlen;
+ dd->ipath_ibmtu = arg;
+
+ if (arg >= (piosize - IPATH_PIO_MAXIBHDR)) {
+ /* Only if it's not the initial value (or reset to it) */
+ if (piosize != dd->ipath_init_ibmaxlen) {
+ if (arg > piosize && arg <= dd->ipath_init_ibmaxlen)
+ piosize = dd->ipath_init_ibmaxlen;
+ dd->ipath_ibmaxlen = piosize;
+ changed = 1;
+ }
+ } else if ((arg + IPATH_PIO_MAXIBHDR) != dd->ipath_ibmaxlen) {
+ piosize = arg + IPATH_PIO_MAXIBHDR;
+ ipath_cdbg(VERBOSE, "ibmaxlen was 0x%x, setting to 0x%x "
+ "(mtu 0x%x)\n", dd->ipath_ibmaxlen, piosize,
+ arg);
+ dd->ipath_ibmaxlen = piosize;
+ changed = 1;
+ }
+
+ if (changed) {
+ u64 ibc = dd->ipath_ibcctrl, ibdw;
+ /*
+ * update our housekeeping variables, and set IBC max
+ * size, same as init code; max IBC is max we allow in
+ * buffer, less the qword pbc, plus 1 for ICRC, in dwords
+ */
+ dd->ipath_ibmaxlen = piosize - 2 * sizeof(u32);
+ ibdw = (dd->ipath_ibmaxlen >> 2) + 1;
+ ibc &= ~(INFINIPATH_IBCC_MAXPKTLEN_MASK <<
+ dd->ibcc_mpl_shift);
+ ibc |= ibdw << dd->ibcc_mpl_shift;
+ dd->ipath_ibcctrl = ibc;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
+ dd->ipath_ibcctrl);
+ dd->ipath_f_tidtemplate(dd);
+ }
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+int ipath_set_lid(struct ipath_devdata *dd, u32 lid, u8 lmc)
+{
+ dd->ipath_lid = lid;
+ dd->ipath_lmc = lmc;
+
+ dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LIDLMC, lid |
+ (~((1U << lmc) - 1)) << 16);
+
+ dev_info(&dd->pcidev->dev, "We got a lid: 0x%x\n", lid);
+
+ return 0;
+}
+
+
+/**
+ * ipath_write_kreg_port - write a device's per-port 64-bit kernel register
+ * @dd: the infinipath device
+ * @regno: the register number to write
+ * @port: the port containing the register
+ * @value: the value to write
+ *
+ * Registers that vary with the chip implementation constants (port)
+ * use this routine.
+ */
+void ipath_write_kreg_port(const struct ipath_devdata *dd, ipath_kreg regno,
+ unsigned port, u64 value)
+{
+ u16 where;
+
+ if (port < dd->ipath_portcnt &&
+ (regno == dd->ipath_kregs->kr_rcvhdraddr ||
+ regno == dd->ipath_kregs->kr_rcvhdrtailaddr))
+ where = regno + port;
+ else
+ where = -1;
+
+ ipath_write_kreg(dd, where, value);
+}
+
+/*
+ * Following deal with the "obviously simple" task of overriding the state
+ * of the LEDS, which normally indicate link physical and logical status.
+ * The complications arise in dealing with different hardware mappings
+ * and the board-dependent routine being called from interrupts.
+ * and then there's the requirement to _flash_ them.
+ */
+#define LED_OVER_FREQ_SHIFT 8
+#define LED_OVER_FREQ_MASK (0xFF<<LED_OVER_FREQ_SHIFT)
+/* Below is "non-zero" to force override, but both actual LEDs are off */
+#define LED_OVER_BOTH_OFF (8)
+
+static void ipath_run_led_override(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
+ int timeoff;
+ int pidx;
+ u64 lstate, ltstate, val;
+
+ if (!(dd->ipath_flags & IPATH_INITTED))
+ return;
+
+ pidx = dd->ipath_led_override_phase++ & 1;
+ dd->ipath_led_override = dd->ipath_led_override_vals[pidx];
+ timeoff = dd->ipath_led_override_timeoff;
+
+ /*
+ * below potentially restores the LED values per current status,
+ * should also possibly setup the traffic-blink register,
+ * but leave that to per-chip functions.
+ */
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+ ltstate = ipath_ib_linktrstate(dd, val);
+ lstate = ipath_ib_linkstate(dd, val);
+
+ dd->ipath_f_setextled(dd, lstate, ltstate);
+ mod_timer(&dd->ipath_led_override_timer, jiffies + timeoff);
+}
+
+void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val)
+{
+ int timeoff, freq;
+
+ if (!(dd->ipath_flags & IPATH_INITTED))
+ return;
+
+ /* First check if we are blinking. If not, use 1HZ polling */
+ timeoff = HZ;
+ freq = (val & LED_OVER_FREQ_MASK) >> LED_OVER_FREQ_SHIFT;
+
+ if (freq) {
+ /* For blink, set each phase from one nybble of val */
+ dd->ipath_led_override_vals[0] = val & 0xF;
+ dd->ipath_led_override_vals[1] = (val >> 4) & 0xF;
+ timeoff = (HZ << 4)/freq;
+ } else {
+ /* Non-blink set both phases the same. */
+ dd->ipath_led_override_vals[0] = val & 0xF;
+ dd->ipath_led_override_vals[1] = val & 0xF;
+ }
+ dd->ipath_led_override_timeoff = timeoff;
+
+ /*
+ * If the timer has not already been started, do so. Use a "quick"
+ * timeout so the function will be called soon, to look at our request.
+ */
+ if (atomic_inc_return(&dd->ipath_led_override_timer_active) == 1) {
+ /* Need to start timer */
+ init_timer(&dd->ipath_led_override_timer);
+ dd->ipath_led_override_timer.function =
+ ipath_run_led_override;
+ dd->ipath_led_override_timer.data = (unsigned long) dd;
+ dd->ipath_led_override_timer.expires = jiffies + 1;
+ add_timer(&dd->ipath_led_override_timer);
+ } else
+ atomic_dec(&dd->ipath_led_override_timer_active);
+}
+
+/**
+ * ipath_shutdown_device - shut down a device
+ * @dd: the infinipath device
+ *
+ * This is called to make the device quiet when we are about to
+ * unload the driver, and also when the device is administratively
+ * disabled. It does not free any data structures.
+ * Everything it does has to be setup again by ipath_init_chip(dd,1)
+ */
+void ipath_shutdown_device(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+
+ ipath_dbg("Shutting down the device\n");
+
+ ipath_hol_up(dd); /* make sure user processes aren't suspended */
+
+ dd->ipath_flags |= IPATH_LINKUNK;
+ dd->ipath_flags &= ~(IPATH_INITTED | IPATH_LINKDOWN |
+ IPATH_LINKINIT | IPATH_LINKARMED |
+ IPATH_LINKACTIVE);
+ *dd->ipath_statusp &= ~(IPATH_STATUS_IB_CONF |
+ IPATH_STATUS_IB_READY);
+
+ /* mask interrupts, but not errors */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
+
+ dd->ipath_rcvctrl = 0;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ teardown_sdma(dd);
+
+ /*
+ * gracefully stop all sends allowing any in progress to trickle out
+ * first.
+ */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl = 0;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
+ /* flush it */
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ /*
+ * enough for anything that's going to trickle out to have actually
+ * done so.
+ */
+ udelay(5);
+
+ dd->ipath_f_setextled(dd, 0, 0); /* make sure LEDs are off */
+
+ ipath_set_ib_lstate(dd, 0, INFINIPATH_IBCC_LINKINITCMD_DISABLE);
+ ipath_cancel_sends(dd, 0);
+
+ /*
+ * we are shutting down, so tell components that care. We don't do
+ * this on just a link state change, much like ethernet, a cable
+ * unplug, etc. doesn't change driver state
+ */
+ signal_ib_event(dd, IB_EVENT_PORT_ERR);
+
+ /* disable IBC */
+ dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+ dd->ipath_control | INFINIPATH_C_FREEZEMODE);
+
+ /*
+ * clear SerdesEnable and turn the leds off; do this here because
+ * we are unloading, so don't count on interrupts to move along
+ * Turn the LEDs off explicitly for the same reason.
+ */
+ dd->ipath_f_quiet_serdes(dd);
+
+ /* stop all the timers that might still be running */
+ del_timer_sync(&dd->ipath_hol_timer);
+ if (dd->ipath_stats_timer_active) {
+ del_timer_sync(&dd->ipath_stats_timer);
+ dd->ipath_stats_timer_active = 0;
+ }
+ if (dd->ipath_intrchk_timer.data) {
+ del_timer_sync(&dd->ipath_intrchk_timer);
+ dd->ipath_intrchk_timer.data = 0;
+ }
+ if (atomic_read(&dd->ipath_led_override_timer_active)) {
+ del_timer_sync(&dd->ipath_led_override_timer);
+ atomic_set(&dd->ipath_led_override_timer_active, 0);
+ }
+
+ /*
+ * clear all interrupts and errors, so that the next time the driver
+ * is loaded or device is enabled, we know that whatever is set
+ * happened while we were unloaded
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
+ ~0ULL & ~INFINIPATH_HWE_MEMBISTFAILED);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
+
+ ipath_cdbg(VERBOSE, "Flush time and errors to EEPROM\n");
+ ipath_update_eeprom_log(dd);
+}
+
+/**
+ * ipath_free_pddata - free a port's allocated data
+ * @dd: the infinipath device
+ * @pd: the portdata structure
+ *
+ * free up any allocated data for a port
+ * This should not touch anything that would affect a simultaneous
+ * re-allocation of port data, because it is called after ipath_mutex
+ * is released (and can be called from reinit as well).
+ * It should never change any chip state, or global driver state.
+ * (The only exception to global state is freeing the port0 port0_skbs.)
+ */
+void ipath_free_pddata(struct ipath_devdata *dd, struct ipath_portdata *pd)
+{
+ if (!pd)
+ return;
+
+ if (pd->port_rcvhdrq) {
+ ipath_cdbg(VERBOSE, "free closed port %d rcvhdrq @ %p "
+ "(size=%lu)\n", pd->port_port, pd->port_rcvhdrq,
+ (unsigned long) pd->port_rcvhdrq_size);
+ dma_free_coherent(&dd->pcidev->dev, pd->port_rcvhdrq_size,
+ pd->port_rcvhdrq, pd->port_rcvhdrq_phys);
+ pd->port_rcvhdrq = NULL;
+ if (pd->port_rcvhdrtail_kvaddr) {
+ dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+ pd->port_rcvhdrtail_kvaddr,
+ pd->port_rcvhdrqtailaddr_phys);
+ pd->port_rcvhdrtail_kvaddr = NULL;
+ }
+ }
+ if (pd->port_port && pd->port_rcvegrbuf) {
+ unsigned e;
+
+ for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
+ void *base = pd->port_rcvegrbuf[e];
+ size_t size = pd->port_rcvegrbuf_size;
+
+ ipath_cdbg(VERBOSE, "egrbuf free(%p, %lu), "
+ "chunk %u/%u\n", base,
+ (unsigned long) size,
+ e, pd->port_rcvegrbuf_chunks);
+ dma_free_coherent(&dd->pcidev->dev, size,
+ base, pd->port_rcvegrbuf_phys[e]);
+ }
+ kfree(pd->port_rcvegrbuf);
+ pd->port_rcvegrbuf = NULL;
+ kfree(pd->port_rcvegrbuf_phys);
+ pd->port_rcvegrbuf_phys = NULL;
+ pd->port_rcvegrbuf_chunks = 0;
+ } else if (pd->port_port == 0 && dd->ipath_port0_skbinfo) {
+ unsigned e;
+ struct ipath_skbinfo *skbinfo = dd->ipath_port0_skbinfo;
+
+ dd->ipath_port0_skbinfo = NULL;
+ ipath_cdbg(VERBOSE, "free closed port %d "
+ "ipath_port0_skbinfo @ %p\n", pd->port_port,
+ skbinfo);
+ for (e = 0; e < dd->ipath_p0_rcvegrcnt; e++)
+ if (skbinfo[e].skb) {
+ pci_unmap_single(dd->pcidev, skbinfo[e].phys,
+ dd->ipath_ibmaxlen,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(skbinfo[e].skb);
+ }
+ vfree(skbinfo);
+ }
+ kfree(pd->port_tid_pg_list);
+ vfree(pd->subport_uregbase);
+ vfree(pd->subport_rcvegrbuf);
+ vfree(pd->subport_rcvhdr_base);
+ kfree(pd);
+}
+
+static int __init infinipath_init(void)
+{
+ int ret;
+
+ if (ipath_debug & __IPATH_DBG)
+ printk(KERN_INFO DRIVER_LOAD_MSG "%s", ib_ipath_version);
+
+ /*
+ * These must be called before the driver is registered with
+ * the PCI subsystem.
+ */
+ idr_init(&unit_table);
+
+ ret = pci_register_driver(&ipath_driver);
+ if (ret < 0) {
+ printk(KERN_ERR IPATH_DRV_NAME
+ ": Unable to register driver: error %d\n", -ret);
+ goto bail_unit;
+ }
+
+ ret = ipath_init_ipathfs();
+ if (ret < 0) {
+ printk(KERN_ERR IPATH_DRV_NAME ": Unable to create "
+ "ipathfs: error %d\n", -ret);
+ goto bail_pci;
+ }
+
+ goto bail;
+
+bail_pci:
+ pci_unregister_driver(&ipath_driver);
+
+bail_unit:
+ idr_destroy(&unit_table);
+
+bail:
+ return ret;
+}
+
+static void __exit infinipath_cleanup(void)
+{
+ ipath_exit_ipathfs();
+
+ ipath_cdbg(VERBOSE, "Unregistering pci driver\n");
+ pci_unregister_driver(&ipath_driver);
+
+ idr_destroy(&unit_table);
+}
+
+/**
+ * ipath_reset_device - reset the chip if possible
+ * @unit: the device to reset
+ *
+ * Whether or not reset is successful, we attempt to re-initialize the chip
+ * (that is, much like a driver unload/reload). We clear the INITTED flag
+ * so that the various entry points will fail until we reinitialize. For
+ * now, we only allow this if no user ports are open that use chip resources
+ */
+int ipath_reset_device(int unit)
+{
+ int ret, i;
+ struct ipath_devdata *dd = ipath_lookup(unit);
+ unsigned long flags;
+
+ if (!dd) {
+ ret = -ENODEV;
+ goto bail;
+ }
+
+ if (atomic_read(&dd->ipath_led_override_timer_active)) {
+ /* Need to stop LED timer, _then_ shut off LEDs */
+ del_timer_sync(&dd->ipath_led_override_timer);
+ atomic_set(&dd->ipath_led_override_timer_active, 0);
+ }
+
+ /* Shut off LEDs after we are sure timer is not running */
+ dd->ipath_led_override = LED_OVER_BOTH_OFF;
+ dd->ipath_f_setextled(dd, 0, 0);
+
+ dev_info(&dd->pcidev->dev, "Reset on unit %u requested\n", unit);
+
+ if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT)) {
+ dev_info(&dd->pcidev->dev, "Invalid unit number %u or "
+ "not initialized or not present\n", unit);
+ ret = -ENXIO;
+ goto bail;
+ }
+
+ spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
+ if (dd->ipath_pd)
+ for (i = 1; i < dd->ipath_cfgports; i++) {
+ if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt)
+ continue;
+ spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
+ ipath_dbg("unit %u port %d is in use "
+ "(PID %u cmd %s), can't reset\n",
+ unit, i,
+ pid_nr(dd->ipath_pd[i]->port_pid),
+ dd->ipath_pd[i]->port_comm);
+ ret = -EBUSY;
+ goto bail;
+ }
+ spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
+
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ teardown_sdma(dd);
+
+ dd->ipath_flags &= ~IPATH_INITTED;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
+ ret = dd->ipath_f_reset(dd);
+ if (ret == 1) {
+ ipath_dbg("Reinitializing unit %u after reset attempt\n",
+ unit);
+ ret = ipath_init_chip(dd, 1);
+ } else
+ ret = -EAGAIN;
+ if (ret)
+ ipath_dev_err(dd, "Reinitialize unit %u after "
+ "reset failed with %d\n", unit, ret);
+ else
+ dev_info(&dd->pcidev->dev, "Reinitialized unit %u after "
+ "resetting\n", unit);
+
+bail:
+ return ret;
+}
+
+/*
+ * send a signal to all the processes that have the driver open
+ * through the normal interfaces (i.e., everything other than diags
+ * interface). Returns number of signalled processes.
+ */
+static int ipath_signal_procs(struct ipath_devdata *dd, int sig)
+{
+ int i, sub, any = 0;
+ struct pid *pid;
+ unsigned long flags;
+
+ if (!dd->ipath_pd)
+ return 0;
+
+ spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
+ for (i = 1; i < dd->ipath_cfgports; i++) {
+ if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt)
+ continue;
+ pid = dd->ipath_pd[i]->port_pid;
+ if (!pid)
+ continue;
+
+ dev_info(&dd->pcidev->dev, "context %d in use "
+ "(PID %u), sending signal %d\n",
+ i, pid_nr(pid), sig);
+ kill_pid(pid, sig, 1);
+ any++;
+ for (sub = 0; sub < INFINIPATH_MAX_SUBPORT; sub++) {
+ pid = dd->ipath_pd[i]->port_subpid[sub];
+ if (!pid)
+ continue;
+ dev_info(&dd->pcidev->dev, "sub-context "
+ "%d:%d in use (PID %u), sending "
+ "signal %d\n", i, sub, pid_nr(pid), sig);
+ kill_pid(pid, sig, 1);
+ any++;
+ }
+ }
+ spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
+ return any;
+}
+
+static void ipath_hol_signal_down(struct ipath_devdata *dd)
+{
+ if (ipath_signal_procs(dd, SIGSTOP))
+ ipath_dbg("Stopped some processes\n");
+ ipath_cancel_sends(dd, 1);
+}
+
+
+static void ipath_hol_signal_up(struct ipath_devdata *dd)
+{
+ if (ipath_signal_procs(dd, SIGCONT))
+ ipath_dbg("Continued some processes\n");
+}
+
+/*
+ * link is down, stop any users processes, and flush pending sends
+ * to prevent HoL blocking, then start the HoL timer that
+ * periodically continues, then stop procs, so they can detect
+ * link down if they want, and do something about it.
+ * Timer may already be running, so use mod_timer, not add_timer.
+ */
+void ipath_hol_down(struct ipath_devdata *dd)
+{
+ dd->ipath_hol_state = IPATH_HOL_DOWN;
+ ipath_hol_signal_down(dd);
+ dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
+ dd->ipath_hol_timer.expires = jiffies +
+ msecs_to_jiffies(ipath_hol_timeout_ms);
+ mod_timer(&dd->ipath_hol_timer, dd->ipath_hol_timer.expires);
+}
+
+/*
+ * link is up, continue any user processes, and ensure timer
+ * is a nop, if running. Let timer keep running, if set; it
+ * will nop when it sees the link is up
+ */
+void ipath_hol_up(struct ipath_devdata *dd)
+{
+ ipath_hol_signal_up(dd);
+ dd->ipath_hol_state = IPATH_HOL_UP;
+}
+
+/*
+ * toggle the running/not running state of user proceses
+ * to prevent HoL blocking on chip resources, but still allow
+ * user processes to do link down special case handling.
+ * Should only be called via the timer
+ */
+void ipath_hol_event(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
+
+ if (dd->ipath_hol_next == IPATH_HOL_DOWNSTOP
+ && dd->ipath_hol_state != IPATH_HOL_UP) {
+ dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
+ ipath_dbg("Stopping processes\n");
+ ipath_hol_signal_down(dd);
+ } else { /* may do "extra" if also in ipath_hol_up() */
+ dd->ipath_hol_next = IPATH_HOL_DOWNSTOP;
+ ipath_dbg("Continuing processes\n");
+ ipath_hol_signal_up(dd);
+ }
+ if (dd->ipath_hol_state == IPATH_HOL_UP)
+ ipath_dbg("link's up, don't resched timer\n");
+ else {
+ dd->ipath_hol_timer.expires = jiffies +
+ msecs_to_jiffies(ipath_hol_timeout_ms);
+ mod_timer(&dd->ipath_hol_timer,
+ dd->ipath_hol_timer.expires);
+ }
+}
+
+int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv)
+{
+ u64 val;
+
+ if (new_pol_inv > INFINIPATH_XGXS_RX_POL_MASK)
+ return -1;
+ if (dd->ipath_rx_pol_inv != new_pol_inv) {
+ dd->ipath_rx_pol_inv = new_pol_inv;
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
+ val &= ~(INFINIPATH_XGXS_RX_POL_MASK <<
+ INFINIPATH_XGXS_RX_POL_SHIFT);
+ val |= ((u64)dd->ipath_rx_pol_inv) <<
+ INFINIPATH_XGXS_RX_POL_SHIFT;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
+ }
+ return 0;
+}
+
+/*
+ * Disable and enable the armlaunch error. Used for PIO bandwidth testing on
+ * the 7220, which is count-based, rather than trigger-based. Safe for the
+ * driver check, since it's at init. Not completely safe when used for
+ * user-mode checking, since some error checking can be lost, but not
+ * particularly risky, and only has problematic side-effects in the face of
+ * very buggy user code. There is no reference counting, but that's also
+ * fine, given the intended use.
+ */
+void ipath_enable_armlaunch(struct ipath_devdata *dd)
+{
+ dd->ipath_lasterror &= ~INFINIPATH_E_SPIOARMLAUNCH;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
+ INFINIPATH_E_SPIOARMLAUNCH);
+ dd->ipath_errormask |= INFINIPATH_E_SPIOARMLAUNCH;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
+ dd->ipath_errormask);
+}
+
+void ipath_disable_armlaunch(struct ipath_devdata *dd)
+{
+ /* so don't re-enable if already set */
+ dd->ipath_maskederrs &= ~INFINIPATH_E_SPIOARMLAUNCH;
+ dd->ipath_errormask &= ~INFINIPATH_E_SPIOARMLAUNCH;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
+ dd->ipath_errormask);
+}
+
+module_init(infinipath_init);
+module_exit(infinipath_cleanup);
Code Review / kvmfornfv.git / blobdiff