--- /dev/null
+/*
+ * apds9300.c - IIO driver for Avago APDS9300 ambient light sensor
+ *
+ * Copyright 2013 Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+
+#define APDS9300_DRV_NAME "apds9300"
+#define APDS9300_IRQ_NAME "apds9300_event"
+
+/* Command register bits */
+#define APDS9300_CMD BIT(7) /* Select command register. Must write as 1 */
+#define APDS9300_WORD BIT(5) /* I2C write/read: if 1 word, if 0 byte */
+#define APDS9300_CLEAR BIT(6) /* Interrupt clear. Clears pending interrupt */
+
+/* Register set */
+#define APDS9300_CONTROL 0x00 /* Control of basic functions */
+#define APDS9300_THRESHLOWLOW 0x02 /* Low byte of low interrupt threshold */
+#define APDS9300_THRESHHIGHLOW 0x04 /* Low byte of high interrupt threshold */
+#define APDS9300_INTERRUPT 0x06 /* Interrupt control */
+#define APDS9300_DATA0LOW 0x0c /* Low byte of ADC channel 0 */
+#define APDS9300_DATA1LOW 0x0e /* Low byte of ADC channel 1 */
+
+/* Power on/off value for APDS9300_CONTROL register */
+#define APDS9300_POWER_ON 0x03
+#define APDS9300_POWER_OFF 0x00
+
+/* Interrupts */
+#define APDS9300_INTR_ENABLE 0x10
+/* Interrupt Persist Function: Any value outside of threshold range */
+#define APDS9300_THRESH_INTR 0x01
+
+#define APDS9300_THRESH_MAX 0xffff /* Max threshold value */
+
+struct apds9300_data {
+ struct i2c_client *client;
+ struct mutex mutex;
+ int power_state;
+ int thresh_low;
+ int thresh_hi;
+ int intr_en;
+};
+
+/* Lux calculation */
+
+/* Calculated values 1000 * (CH1/CH0)^1.4 for CH1/CH0 from 0 to 0.52 */
+static const u16 apds9300_lux_ratio[] = {
+ 0, 2, 4, 7, 11, 15, 19, 24, 29, 34, 40, 45, 51, 57, 64, 70, 77, 84, 91,
+ 98, 105, 112, 120, 128, 136, 144, 152, 160, 168, 177, 185, 194, 203,
+ 212, 221, 230, 239, 249, 258, 268, 277, 287, 297, 307, 317, 327, 337,
+ 347, 358, 368, 379, 390, 400,
+};
+
+static unsigned long apds9300_calculate_lux(u16 ch0, u16 ch1)
+{
+ unsigned long lux, tmp;
+
+ /* avoid division by zero */
+ if (ch0 == 0)
+ return 0;
+
+ tmp = DIV_ROUND_UP(ch1 * 100, ch0);
+ if (tmp <= 52) {
+ lux = 3150 * ch0 - (unsigned long)DIV_ROUND_UP_ULL(ch0
+ * apds9300_lux_ratio[tmp] * 5930ull, 1000);
+ } else if (tmp <= 65) {
+ lux = 2290 * ch0 - 2910 * ch1;
+ } else if (tmp <= 80) {
+ lux = 1570 * ch0 - 1800 * ch1;
+ } else if (tmp <= 130) {
+ lux = 338 * ch0 - 260 * ch1;
+ } else {
+ lux = 0;
+ }
+
+ return lux / 100000;
+}
+
+static int apds9300_get_adc_val(struct apds9300_data *data, int adc_number)
+{
+ int ret;
+ u8 flags = APDS9300_CMD | APDS9300_WORD;
+
+ if (!data->power_state)
+ return -EBUSY;
+
+ /* Select ADC0 or ADC1 data register */
+ flags |= adc_number ? APDS9300_DATA1LOW : APDS9300_DATA0LOW;
+
+ ret = i2c_smbus_read_word_data(data->client, flags);
+ if (ret < 0)
+ dev_err(&data->client->dev,
+ "failed to read ADC%d value\n", adc_number);
+
+ return ret;
+}
+
+static int apds9300_set_thresh_low(struct apds9300_data *data, int value)
+{
+ int ret;
+
+ if (!data->power_state)
+ return -EBUSY;
+
+ if (value > APDS9300_THRESH_MAX)
+ return -EINVAL;
+
+ ret = i2c_smbus_write_word_data(data->client, APDS9300_THRESHLOWLOW
+ | APDS9300_CMD | APDS9300_WORD, value);
+ if (ret) {
+ dev_err(&data->client->dev, "failed to set thresh_low\n");
+ return ret;
+ }
+ data->thresh_low = value;
+
+ return 0;
+}
+
+static int apds9300_set_thresh_hi(struct apds9300_data *data, int value)
+{
+ int ret;
+
+ if (!data->power_state)
+ return -EBUSY;
+
+ if (value > APDS9300_THRESH_MAX)
+ return -EINVAL;
+
+ ret = i2c_smbus_write_word_data(data->client, APDS9300_THRESHHIGHLOW
+ | APDS9300_CMD | APDS9300_WORD, value);
+ if (ret) {
+ dev_err(&data->client->dev, "failed to set thresh_hi\n");
+ return ret;
+ }
+ data->thresh_hi = value;
+
+ return 0;
+}
+
+static int apds9300_set_intr_state(struct apds9300_data *data, int state)
+{
+ int ret;
+ u8 cmd;
+
+ if (!data->power_state)
+ return -EBUSY;
+
+ cmd = state ? APDS9300_INTR_ENABLE | APDS9300_THRESH_INTR : 0x00;
+ ret = i2c_smbus_write_byte_data(data->client,
+ APDS9300_INTERRUPT | APDS9300_CMD, cmd);
+ if (ret) {
+ dev_err(&data->client->dev,
+ "failed to set interrupt state %d\n", state);
+ return ret;
+ }
+ data->intr_en = state;
+
+ return 0;
+}
+
+static int apds9300_set_power_state(struct apds9300_data *data, int state)
+{
+ int ret;
+ u8 cmd;
+
+ cmd = state ? APDS9300_POWER_ON : APDS9300_POWER_OFF;
+ ret = i2c_smbus_write_byte_data(data->client,
+ APDS9300_CONTROL | APDS9300_CMD, cmd);
+ if (ret) {
+ dev_err(&data->client->dev,
+ "failed to set power state %d\n", state);
+ return ret;
+ }
+ data->power_state = state;
+
+ return 0;
+}
+
+static void apds9300_clear_intr(struct apds9300_data *data)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte(data->client, APDS9300_CLEAR | APDS9300_CMD);
+ if (ret < 0)
+ dev_err(&data->client->dev, "failed to clear interrupt\n");
+}
+
+static int apds9300_chip_init(struct apds9300_data *data)
+{
+ int ret;
+
+ /* Need to set power off to ensure that the chip is off */
+ ret = apds9300_set_power_state(data, 0);
+ if (ret < 0)
+ goto err;
+ /*
+ * Probe the chip. To do so we try to power up the device and then to
+ * read back the 0x03 code
+ */
+ ret = apds9300_set_power_state(data, 1);
+ if (ret < 0)
+ goto err;
+ ret = i2c_smbus_read_byte_data(data->client,
+ APDS9300_CONTROL | APDS9300_CMD);
+ if (ret != APDS9300_POWER_ON) {
+ ret = -ENODEV;
+ goto err;
+ }
+ /*
+ * Disable interrupt to ensure thai it is doesn't enable
+ * i.e. after device soft reset
+ */
+ ret = apds9300_set_intr_state(data, 0);
+ if (ret < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dev_err(&data->client->dev, "failed to init the chip\n");
+ return ret;
+}
+
+static int apds9300_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val, int *val2,
+ long mask)
+{
+ int ch0, ch1, ret = -EINVAL;
+ struct apds9300_data *data = iio_priv(indio_dev);
+
+ mutex_lock(&data->mutex);
+ switch (chan->type) {
+ case IIO_LIGHT:
+ ch0 = apds9300_get_adc_val(data, 0);
+ if (ch0 < 0) {
+ ret = ch0;
+ break;
+ }
+ ch1 = apds9300_get_adc_val(data, 1);
+ if (ch1 < 0) {
+ ret = ch1;
+ break;
+ }
+ *val = apds9300_calculate_lux(ch0, ch1);
+ ret = IIO_VAL_INT;
+ break;
+ case IIO_INTENSITY:
+ ret = apds9300_get_adc_val(data, chan->channel);
+ if (ret < 0)
+ break;
+ *val = ret;
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ break;
+ }
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static int apds9300_read_thresh(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir, enum iio_event_info info,
+ int *val, int *val2)
+{
+ struct apds9300_data *data = iio_priv(indio_dev);
+
+ switch (dir) {
+ case IIO_EV_DIR_RISING:
+ *val = data->thresh_hi;
+ break;
+ case IIO_EV_DIR_FALLING:
+ *val = data->thresh_low;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return IIO_VAL_INT;
+}
+
+static int apds9300_write_thresh(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir, enum iio_event_info info, int val,
+ int val2)
+{
+ struct apds9300_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+ if (dir == IIO_EV_DIR_RISING)
+ ret = apds9300_set_thresh_hi(data, val);
+ else
+ ret = apds9300_set_thresh_low(data, val);
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static int apds9300_read_interrupt_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct apds9300_data *data = iio_priv(indio_dev);
+
+ return data->intr_en;
+}
+
+static int apds9300_write_interrupt_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir, int state)
+{
+ struct apds9300_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = apds9300_set_intr_state(data, state);
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static const struct iio_info apds9300_info_no_irq = {
+ .driver_module = THIS_MODULE,
+ .read_raw = apds9300_read_raw,
+};
+
+static const struct iio_info apds9300_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = apds9300_read_raw,
+ .read_event_value = apds9300_read_thresh,
+ .write_event_value = apds9300_write_thresh,
+ .read_event_config = apds9300_read_interrupt_config,
+ .write_event_config = apds9300_write_interrupt_config,
+};
+
+static const struct iio_event_spec apds9300_event_spec[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ },
+};
+
+static const struct iio_chan_spec apds9300_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .channel = 0,
+ .indexed = true,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ }, {
+ .type = IIO_INTENSITY,
+ .channel = 0,
+ .channel2 = IIO_MOD_LIGHT_BOTH,
+ .indexed = true,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .event_spec = apds9300_event_spec,
+ .num_event_specs = ARRAY_SIZE(apds9300_event_spec),
+ }, {
+ .type = IIO_INTENSITY,
+ .channel = 1,
+ .channel2 = IIO_MOD_LIGHT_IR,
+ .indexed = true,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ },
+};
+
+static irqreturn_t apds9300_interrupt_handler(int irq, void *private)
+{
+ struct iio_dev *dev_info = private;
+ struct apds9300_data *data = iio_priv(dev_info);
+
+ iio_push_event(dev_info,
+ IIO_UNMOD_EVENT_CODE(IIO_INTENSITY, 0,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_EITHER),
+ iio_get_time_ns());
+
+ apds9300_clear_intr(data);
+
+ return IRQ_HANDLED;
+}
+
+static int apds9300_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct apds9300_data *data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+
+ ret = apds9300_chip_init(data);
+ if (ret < 0)
+ goto err;
+
+ mutex_init(&data->mutex);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->channels = apds9300_channels;
+ indio_dev->num_channels = ARRAY_SIZE(apds9300_channels);
+ indio_dev->name = APDS9300_DRV_NAME;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ if (client->irq)
+ indio_dev->info = &apds9300_info;
+ else
+ indio_dev->info = &apds9300_info_no_irq;
+
+ if (client->irq) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, apds9300_interrupt_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ APDS9300_IRQ_NAME, indio_dev);
+ if (ret) {
+ dev_err(&client->dev, "irq request error %d\n", -ret);
+ goto err;
+ }
+ }
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0)
+ goto err;
+
+ return 0;
+
+err:
+ /* Ensure that power off in case of error */
+ apds9300_set_power_state(data, 0);
+ return ret;
+}
+
+static int apds9300_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct apds9300_data *data = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ /* Ensure that power off and interrupts are disabled */
+ apds9300_set_intr_state(data, 0);
+ apds9300_set_power_state(data, 0);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int apds9300_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct apds9300_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = apds9300_set_power_state(data, 0);
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static int apds9300_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct apds9300_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = apds9300_set_power_state(data, 1);
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(apds9300_pm_ops, apds9300_suspend, apds9300_resume);
+#define APDS9300_PM_OPS (&apds9300_pm_ops)
+#else
+#define APDS9300_PM_OPS NULL
+#endif
+
+static struct i2c_device_id apds9300_id[] = {
+ { APDS9300_DRV_NAME, 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, apds9300_id);
+
+static struct i2c_driver apds9300_driver = {
+ .driver = {
+ .name = APDS9300_DRV_NAME,
+ .owner = THIS_MODULE,
+ .pm = APDS9300_PM_OPS,
+ },
+ .probe = apds9300_probe,
+ .remove = apds9300_remove,
+ .id_table = apds9300_id,
+};
+
+module_i2c_driver(apds9300_driver);
+
+MODULE_AUTHOR("Kravchenko Oleksandr <o.v.kravchenko@globallogic.com>");
+MODULE_AUTHOR("GlobalLogic inc.");
+MODULE_DESCRIPTION("APDS9300 ambient light photo sensor driver");
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff