Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / iio / gyro / Kconfig

diff --git a/kernel/drivers/iio/gyro/Kconfig b/kernel/drivers/iio/gyro/Kconfig
new file mode 100644 (file)
index 0000000..b3d0e94
--- /dev/null
+++ b/kernel/drivers/iio/gyro/Kconfig
@@ -0,0 +1,112 @@
+#
+# IIO Digital Gyroscope Sensor drivers configuration
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Digital gyroscope sensors"
+
+config ADIS16080
+       tristate "Analog Devices ADIS16080/100 Yaw Rate Gyroscope with SPI driver"
+       depends on SPI
+       help
+         Say yes here to build support for Analog Devices ADIS16080, ADIS16100 Yaw
+         Rate Gyroscope with SPI.
+
+config ADIS16130
+       tristate "Analog Devices ADIS16130 High Precision Angular Rate Sensor driver"
+       depends on SPI
+       help
+         Say yes here to build support for Analog Devices ADIS16130 High Precision
+         Angular Rate Sensor driver.
+
+config ADIS16136
+       tristate "Analog devices ADIS16136 and similar gyroscopes driver"
+       depends on SPI_MASTER
+       select IIO_ADIS_LIB
+       select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+       help
+         Say yes here to build support for the Analog Devices ADIS16133, ADIS16135,
+         ADIS16136 gyroscope devices.
+
+config ADIS16260
+       tristate "Analog Devices ADIS16260 Digital Gyroscope Sensor SPI driver"
+       depends on SPI
+       select IIO_ADIS_LIB
+       select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+       help
+         Say yes here to build support for Analog Devices ADIS16260 ADIS16265
+         ADIS16250 ADIS16255 and ADIS16251 programmable digital gyroscope sensors.
+
+         This driver can also be built as a module.  If so, the module
+         will be called adis16260.
+
+config ADXRS450
+       tristate "Analog Devices ADXRS450/3 Digital Output Gyroscope SPI driver"
+       depends on SPI
+       help
+         Say yes here to build support for Analog Devices ADXRS450 and ADXRS453
+         programmable digital output gyroscope.
+
+         This driver can also be built as a module.  If so, the module
+         will be called adxrs450.
+
+config BMG160
+       tristate "BOSCH BMG160 Gyro Sensor"
+       depends on I2C
+       select IIO_TRIGGERED_BUFFER if IIO_BUFFER
+       help
+         Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor
+         driver. This driver also supports BMI055 gyroscope.
+
+         This driver can also be built as a module.  If so, the module
+         will be called bmg160.
+
+config HID_SENSOR_GYRO_3D
+       depends on HID_SENSOR_HUB
+       select IIO_BUFFER
+       select IIO_TRIGGERED_BUFFER
+       select HID_SENSOR_IIO_COMMON
+       select HID_SENSOR_IIO_TRIGGER
+       tristate "HID Gyroscope 3D"
+       help
+         Say yes here to build support for the HID SENSOR
+         Gyroscope 3D.
+
+config IIO_ST_GYRO_3AXIS
+       tristate "STMicroelectronics gyroscopes 3-Axis Driver"
+       depends on (I2C || SPI_MASTER) && SYSFS
+       select IIO_ST_SENSORS_CORE
+       select IIO_ST_GYRO_I2C_3AXIS if (I2C)
+       select IIO_ST_GYRO_SPI_3AXIS if (SPI_MASTER)
+       select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+       help
+         Say yes here to build support for STMicroelectronics gyroscopes:
+         L3G4200D, LSM330DL, L3GD20, LSM330DLC, L3G4IS, LSM330.
+
+         This driver can also be built as a module. If so, these modules
+         will be created:
+         - st_gyro (core functions for the driver [it is mandatory]);
+         - st_gyro_i2c (necessary for the I2C devices [optional*]);
+         - st_gyro_spi (necessary for the SPI devices [optional*]);
+
+         (*) one of these is necessary to do something.
+
+config IIO_ST_GYRO_I2C_3AXIS
+       tristate
+       depends on IIO_ST_GYRO_3AXIS
+       depends on IIO_ST_SENSORS_I2C
+
+config IIO_ST_GYRO_SPI_3AXIS
+       tristate
+       depends on IIO_ST_GYRO_3AXIS
+       depends on IIO_ST_SENSORS_SPI
+
+config ITG3200
+       tristate "InvenSense ITG3200 Digital 3-Axis Gyroscope I2C driver"
+       depends on I2C
+       select IIO_TRIGGERED_BUFFER if IIO_BUFFER
+       help
+         Say yes here to add support for the InvenSense ITG3200 digital
+         3-axis gyroscope sensor.
+
+endmenu