--- /dev/null
+/*
+ * Freescale Vybrid vf610 ADC driver
+ *
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/driver.h>
+
+/* This will be the driver name the kernel reports */
+#define DRIVER_NAME "vf610-adc"
+
+/* Vybrid/IMX ADC registers */
+#define VF610_REG_ADC_HC0 0x00
+#define VF610_REG_ADC_HC1 0x04
+#define VF610_REG_ADC_HS 0x08
+#define VF610_REG_ADC_R0 0x0c
+#define VF610_REG_ADC_R1 0x10
+#define VF610_REG_ADC_CFG 0x14
+#define VF610_REG_ADC_GC 0x18
+#define VF610_REG_ADC_GS 0x1c
+#define VF610_REG_ADC_CV 0x20
+#define VF610_REG_ADC_OFS 0x24
+#define VF610_REG_ADC_CAL 0x28
+#define VF610_REG_ADC_PCTL 0x30
+
+/* Configuration register field define */
+#define VF610_ADC_MODE_BIT8 0x00
+#define VF610_ADC_MODE_BIT10 0x04
+#define VF610_ADC_MODE_BIT12 0x08
+#define VF610_ADC_MODE_MASK 0x0c
+#define VF610_ADC_BUSCLK2_SEL 0x01
+#define VF610_ADC_ALTCLK_SEL 0x02
+#define VF610_ADC_ADACK_SEL 0x03
+#define VF610_ADC_ADCCLK_MASK 0x03
+#define VF610_ADC_CLK_DIV2 0x20
+#define VF610_ADC_CLK_DIV4 0x40
+#define VF610_ADC_CLK_DIV8 0x60
+#define VF610_ADC_CLK_MASK 0x60
+#define VF610_ADC_ADLSMP_LONG 0x10
+#define VF610_ADC_ADSTS_MASK 0x300
+#define VF610_ADC_ADLPC_EN 0x80
+#define VF610_ADC_ADHSC_EN 0x400
+#define VF610_ADC_REFSEL_VALT 0x100
+#define VF610_ADC_REFSEL_VBG 0x1000
+#define VF610_ADC_ADTRG_HARD 0x2000
+#define VF610_ADC_AVGS_8 0x4000
+#define VF610_ADC_AVGS_16 0x8000
+#define VF610_ADC_AVGS_32 0xC000
+#define VF610_ADC_AVGS_MASK 0xC000
+#define VF610_ADC_OVWREN 0x10000
+
+/* General control register field define */
+#define VF610_ADC_ADACKEN 0x1
+#define VF610_ADC_DMAEN 0x2
+#define VF610_ADC_ACREN 0x4
+#define VF610_ADC_ACFGT 0x8
+#define VF610_ADC_ACFE 0x10
+#define VF610_ADC_AVGEN 0x20
+#define VF610_ADC_ADCON 0x40
+#define VF610_ADC_CAL 0x80
+
+/* Other field define */
+#define VF610_ADC_ADCHC(x) ((x) & 0x1F)
+#define VF610_ADC_AIEN (0x1 << 7)
+#define VF610_ADC_CONV_DISABLE 0x1F
+#define VF610_ADC_HS_COCO0 0x1
+#define VF610_ADC_CALF 0x2
+#define VF610_ADC_TIMEOUT msecs_to_jiffies(100)
+
+enum clk_sel {
+ VF610_ADCIOC_BUSCLK_SET,
+ VF610_ADCIOC_ALTCLK_SET,
+ VF610_ADCIOC_ADACK_SET,
+};
+
+enum vol_ref {
+ VF610_ADCIOC_VR_VREF_SET,
+ VF610_ADCIOC_VR_VALT_SET,
+ VF610_ADCIOC_VR_VBG_SET,
+};
+
+enum average_sel {
+ VF610_ADC_SAMPLE_1,
+ VF610_ADC_SAMPLE_4,
+ VF610_ADC_SAMPLE_8,
+ VF610_ADC_SAMPLE_16,
+ VF610_ADC_SAMPLE_32,
+};
+
+struct vf610_adc_feature {
+ enum clk_sel clk_sel;
+ enum vol_ref vol_ref;
+
+ int clk_div;
+ int sample_rate;
+ int res_mode;
+
+ bool lpm;
+ bool calibration;
+ bool ovwren;
+};
+
+struct vf610_adc {
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *clk;
+
+ u32 vref_uv;
+ u32 value;
+ struct regulator *vref;
+ struct vf610_adc_feature adc_feature;
+
+ u32 sample_freq_avail[5];
+
+ struct completion completion;
+};
+
+static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 };
+
+#define VF610_ADC_CHAN(_idx, _chan_type) { \
+ .type = (_chan_type), \
+ .indexed = 1, \
+ .channel = (_idx), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+}
+
+#define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) { \
+ .type = (_chan_type), \
+ .channel = (_idx), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+}
+
+static const struct iio_chan_spec vf610_adc_iio_channels[] = {
+ VF610_ADC_CHAN(0, IIO_VOLTAGE),
+ VF610_ADC_CHAN(1, IIO_VOLTAGE),
+ VF610_ADC_CHAN(2, IIO_VOLTAGE),
+ VF610_ADC_CHAN(3, IIO_VOLTAGE),
+ VF610_ADC_CHAN(4, IIO_VOLTAGE),
+ VF610_ADC_CHAN(5, IIO_VOLTAGE),
+ VF610_ADC_CHAN(6, IIO_VOLTAGE),
+ VF610_ADC_CHAN(7, IIO_VOLTAGE),
+ VF610_ADC_CHAN(8, IIO_VOLTAGE),
+ VF610_ADC_CHAN(9, IIO_VOLTAGE),
+ VF610_ADC_CHAN(10, IIO_VOLTAGE),
+ VF610_ADC_CHAN(11, IIO_VOLTAGE),
+ VF610_ADC_CHAN(12, IIO_VOLTAGE),
+ VF610_ADC_CHAN(13, IIO_VOLTAGE),
+ VF610_ADC_CHAN(14, IIO_VOLTAGE),
+ VF610_ADC_CHAN(15, IIO_VOLTAGE),
+ VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP),
+ /* sentinel */
+};
+
+static inline void vf610_adc_calculate_rates(struct vf610_adc *info)
+{
+ unsigned long adck_rate, ipg_rate = clk_get_rate(info->clk);
+ int i;
+
+ /*
+ * Calculate ADC sample frequencies
+ * Sample time unit is ADCK cycles. ADCK clk source is ipg clock,
+ * which is the same as bus clock.
+ *
+ * ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder)
+ * SFCAdder: fixed to 6 ADCK cycles
+ * AverageNum: 1, 4, 8, 16, 32 samples for hardware average.
+ * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode
+ * LSTAdder(Long Sample Time): fixed to 3 ADCK cycles
+ */
+ adck_rate = ipg_rate / info->adc_feature.clk_div;
+ for (i = 0; i < ARRAY_SIZE(vf610_hw_avgs); i++)
+ info->sample_freq_avail[i] =
+ adck_rate / (6 + vf610_hw_avgs[i] * (25 + 3));
+}
+
+static inline void vf610_adc_cfg_init(struct vf610_adc *info)
+{
+ struct vf610_adc_feature *adc_feature = &info->adc_feature;
+
+ /* set default Configuration for ADC controller */
+ adc_feature->clk_sel = VF610_ADCIOC_BUSCLK_SET;
+ adc_feature->vol_ref = VF610_ADCIOC_VR_VREF_SET;
+
+ adc_feature->calibration = true;
+ adc_feature->ovwren = true;
+
+ adc_feature->res_mode = 12;
+ adc_feature->sample_rate = 1;
+ adc_feature->lpm = true;
+
+ /* Use a save ADCK which is below 20MHz on all devices */
+ adc_feature->clk_div = 8;
+
+ vf610_adc_calculate_rates(info);
+}
+
+static void vf610_adc_cfg_post_set(struct vf610_adc *info)
+{
+ struct vf610_adc_feature *adc_feature = &info->adc_feature;
+ int cfg_data = 0;
+ int gc_data = 0;
+
+ switch (adc_feature->clk_sel) {
+ case VF610_ADCIOC_ALTCLK_SET:
+ cfg_data |= VF610_ADC_ALTCLK_SEL;
+ break;
+ case VF610_ADCIOC_ADACK_SET:
+ cfg_data |= VF610_ADC_ADACK_SEL;
+ break;
+ default:
+ break;
+ }
+
+ /* low power set for calibration */
+ cfg_data |= VF610_ADC_ADLPC_EN;
+
+ /* enable high speed for calibration */
+ cfg_data |= VF610_ADC_ADHSC_EN;
+
+ /* voltage reference */
+ switch (adc_feature->vol_ref) {
+ case VF610_ADCIOC_VR_VREF_SET:
+ break;
+ case VF610_ADCIOC_VR_VALT_SET:
+ cfg_data |= VF610_ADC_REFSEL_VALT;
+ break;
+ case VF610_ADCIOC_VR_VBG_SET:
+ cfg_data |= VF610_ADC_REFSEL_VBG;
+ break;
+ default:
+ dev_err(info->dev, "error voltage reference\n");
+ }
+
+ /* data overwrite enable */
+ if (adc_feature->ovwren)
+ cfg_data |= VF610_ADC_OVWREN;
+
+ writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
+ writel(gc_data, info->regs + VF610_REG_ADC_GC);
+}
+
+static void vf610_adc_calibration(struct vf610_adc *info)
+{
+ int adc_gc, hc_cfg;
+
+ if (!info->adc_feature.calibration)
+ return;
+
+ /* enable calibration interrupt */
+ hc_cfg = VF610_ADC_AIEN | VF610_ADC_CONV_DISABLE;
+ writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
+
+ adc_gc = readl(info->regs + VF610_REG_ADC_GC);
+ writel(adc_gc | VF610_ADC_CAL, info->regs + VF610_REG_ADC_GC);
+
+ if (!wait_for_completion_timeout(&info->completion, VF610_ADC_TIMEOUT))
+ dev_err(info->dev, "Timeout for adc calibration\n");
+
+ adc_gc = readl(info->regs + VF610_REG_ADC_GS);
+ if (adc_gc & VF610_ADC_CALF)
+ dev_err(info->dev, "ADC calibration failed\n");
+
+ info->adc_feature.calibration = false;
+}
+
+static void vf610_adc_cfg_set(struct vf610_adc *info)
+{
+ struct vf610_adc_feature *adc_feature = &(info->adc_feature);
+ int cfg_data;
+
+ cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
+
+ cfg_data &= ~VF610_ADC_ADLPC_EN;
+ if (adc_feature->lpm)
+ cfg_data |= VF610_ADC_ADLPC_EN;
+
+ cfg_data &= ~VF610_ADC_ADHSC_EN;
+
+ writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
+}
+
+static void vf610_adc_sample_set(struct vf610_adc *info)
+{
+ struct vf610_adc_feature *adc_feature = &(info->adc_feature);
+ int cfg_data, gc_data;
+
+ cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
+ gc_data = readl(info->regs + VF610_REG_ADC_GC);
+
+ /* resolution mode */
+ cfg_data &= ~VF610_ADC_MODE_MASK;
+ switch (adc_feature->res_mode) {
+ case 8:
+ cfg_data |= VF610_ADC_MODE_BIT8;
+ break;
+ case 10:
+ cfg_data |= VF610_ADC_MODE_BIT10;
+ break;
+ case 12:
+ cfg_data |= VF610_ADC_MODE_BIT12;
+ break;
+ default:
+ dev_err(info->dev, "error resolution mode\n");
+ break;
+ }
+
+ /* clock select and clock divider */
+ cfg_data &= ~(VF610_ADC_CLK_MASK | VF610_ADC_ADCCLK_MASK);
+ switch (adc_feature->clk_div) {
+ case 1:
+ break;
+ case 2:
+ cfg_data |= VF610_ADC_CLK_DIV2;
+ break;
+ case 4:
+ cfg_data |= VF610_ADC_CLK_DIV4;
+ break;
+ case 8:
+ cfg_data |= VF610_ADC_CLK_DIV8;
+ break;
+ case 16:
+ switch (adc_feature->clk_sel) {
+ case VF610_ADCIOC_BUSCLK_SET:
+ cfg_data |= VF610_ADC_BUSCLK2_SEL | VF610_ADC_CLK_DIV8;
+ break;
+ default:
+ dev_err(info->dev, "error clk divider\n");
+ break;
+ }
+ break;
+ }
+
+ /* Use the short sample mode */
+ cfg_data &= ~(VF610_ADC_ADLSMP_LONG | VF610_ADC_ADSTS_MASK);
+
+ /* update hardware average selection */
+ cfg_data &= ~VF610_ADC_AVGS_MASK;
+ gc_data &= ~VF610_ADC_AVGEN;
+ switch (adc_feature->sample_rate) {
+ case VF610_ADC_SAMPLE_1:
+ break;
+ case VF610_ADC_SAMPLE_4:
+ gc_data |= VF610_ADC_AVGEN;
+ break;
+ case VF610_ADC_SAMPLE_8:
+ gc_data |= VF610_ADC_AVGEN;
+ cfg_data |= VF610_ADC_AVGS_8;
+ break;
+ case VF610_ADC_SAMPLE_16:
+ gc_data |= VF610_ADC_AVGEN;
+ cfg_data |= VF610_ADC_AVGS_16;
+ break;
+ case VF610_ADC_SAMPLE_32:
+ gc_data |= VF610_ADC_AVGEN;
+ cfg_data |= VF610_ADC_AVGS_32;
+ break;
+ default:
+ dev_err(info->dev,
+ "error hardware sample average select\n");
+ }
+
+ writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
+ writel(gc_data, info->regs + VF610_REG_ADC_GC);
+}
+
+static void vf610_adc_hw_init(struct vf610_adc *info)
+{
+ /* CFG: Feature set */
+ vf610_adc_cfg_post_set(info);
+ vf610_adc_sample_set(info);
+
+ /* adc calibration */
+ vf610_adc_calibration(info);
+
+ /* CFG: power and speed set */
+ vf610_adc_cfg_set(info);
+}
+
+static int vf610_adc_read_data(struct vf610_adc *info)
+{
+ int result;
+
+ result = readl(info->regs + VF610_REG_ADC_R0);
+
+ switch (info->adc_feature.res_mode) {
+ case 8:
+ result &= 0xFF;
+ break;
+ case 10:
+ result &= 0x3FF;
+ break;
+ case 12:
+ result &= 0xFFF;
+ break;
+ default:
+ break;
+ }
+
+ return result;
+}
+
+static irqreturn_t vf610_adc_isr(int irq, void *dev_id)
+{
+ struct vf610_adc *info = (struct vf610_adc *)dev_id;
+ int coco;
+
+ coco = readl(info->regs + VF610_REG_ADC_HS);
+ if (coco & VF610_ADC_HS_COCO0) {
+ info->value = vf610_adc_read_data(info);
+ complete(&info->completion);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static ssize_t vf610_show_samp_freq_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct vf610_adc *info = iio_priv(dev_to_iio_dev(dev));
+ size_t len = 0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(info->sample_freq_avail); i++)
+ len += scnprintf(buf + len, PAGE_SIZE - len,
+ "%u ", info->sample_freq_avail[i]);
+
+ /* replace trailing space by newline */
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(vf610_show_samp_freq_avail);
+
+static struct attribute *vf610_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group vf610_attribute_group = {
+ .attrs = vf610_attributes,
+};
+
+static int vf610_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ struct vf610_adc *info = iio_priv(indio_dev);
+ unsigned int hc_cfg;
+ long ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ case IIO_CHAN_INFO_PROCESSED:
+ mutex_lock(&indio_dev->mlock);
+ reinit_completion(&info->completion);
+
+ hc_cfg = VF610_ADC_ADCHC(chan->channel);
+ hc_cfg |= VF610_ADC_AIEN;
+ writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
+ ret = wait_for_completion_interruptible_timeout
+ (&info->completion, VF610_ADC_TIMEOUT);
+ if (ret == 0) {
+ mutex_unlock(&indio_dev->mlock);
+ return -ETIMEDOUT;
+ }
+ if (ret < 0) {
+ mutex_unlock(&indio_dev->mlock);
+ return ret;
+ }
+
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ *val = info->value;
+ break;
+ case IIO_TEMP:
+ /*
+ * Calculate in degree Celsius times 1000
+ * Using sensor slope of 1.84 mV/°C and
+ * V at 25°C of 696 mV
+ */
+ *val = 25000 - ((int)info->value - 864) * 1000000 / 1840;
+ break;
+ default:
+ mutex_unlock(&indio_dev->mlock);
+ return -EINVAL;
+ }
+
+ mutex_unlock(&indio_dev->mlock);
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ *val = info->vref_uv / 1000;
+ *val2 = info->adc_feature.res_mode;
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = info->sample_freq_avail[info->adc_feature.sample_rate];
+ *val2 = 0;
+ return IIO_VAL_INT;
+
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static int vf610_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ struct vf610_adc *info = iio_priv(indio_dev);
+ int i;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ for (i = 0;
+ i < ARRAY_SIZE(info->sample_freq_avail);
+ i++)
+ if (val == info->sample_freq_avail[i]) {
+ info->adc_feature.sample_rate = i;
+ vf610_adc_sample_set(info);
+ return 0;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static int vf610_adc_reg_access(struct iio_dev *indio_dev,
+ unsigned reg, unsigned writeval,
+ unsigned *readval)
+{
+ struct vf610_adc *info = iio_priv(indio_dev);
+
+ if ((readval == NULL) ||
+ (!(reg % 4) || (reg > VF610_REG_ADC_PCTL)))
+ return -EINVAL;
+
+ *readval = readl(info->regs + reg);
+
+ return 0;
+}
+
+static const struct iio_info vf610_adc_iio_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &vf610_read_raw,
+ .write_raw = &vf610_write_raw,
+ .debugfs_reg_access = &vf610_adc_reg_access,
+ .attrs = &vf610_attribute_group,
+};
+
+static const struct of_device_id vf610_adc_match[] = {
+ { .compatible = "fsl,vf610-adc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vf610_adc_match);
+
+static int vf610_adc_probe(struct platform_device *pdev)
+{
+ struct vf610_adc *info;
+ struct iio_dev *indio_dev;
+ struct resource *mem;
+ int irq;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct vf610_adc));
+ if (!indio_dev) {
+ dev_err(&pdev->dev, "Failed allocating iio device\n");
+ return -ENOMEM;
+ }
+
+ info = iio_priv(indio_dev);
+ info->dev = &pdev->dev;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ info->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(info->regs))
+ return PTR_ERR(info->regs);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return irq;
+ }
+
+ ret = devm_request_irq(info->dev, irq,
+ vf610_adc_isr, 0,
+ dev_name(&pdev->dev), info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", irq);
+ return ret;
+ }
+
+ info->clk = devm_clk_get(&pdev->dev, "adc");
+ if (IS_ERR(info->clk)) {
+ dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
+ PTR_ERR(info->clk));
+ return PTR_ERR(info->clk);
+ }
+
+ info->vref = devm_regulator_get(&pdev->dev, "vref");
+ if (IS_ERR(info->vref))
+ return PTR_ERR(info->vref);
+
+ ret = regulator_enable(info->vref);
+ if (ret)
+ return ret;
+
+ info->vref_uv = regulator_get_voltage(info->vref);
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ init_completion(&info->completion);
+
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->dev.of_node = pdev->dev.of_node;
+ indio_dev->info = &vf610_adc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = vf610_adc_iio_channels;
+ indio_dev->num_channels = ARRAY_SIZE(vf610_adc_iio_channels);
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not prepare or enable the clock.\n");
+ goto error_adc_clk_enable;
+ }
+
+ vf610_adc_cfg_init(info);
+ vf610_adc_hw_init(info);
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't register the device.\n");
+ goto error_iio_device_register;
+ }
+
+ return 0;
+
+
+error_iio_device_register:
+ clk_disable_unprepare(info->clk);
+error_adc_clk_enable:
+ regulator_disable(info->vref);
+
+ return ret;
+}
+
+static int vf610_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct vf610_adc *info = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ regulator_disable(info->vref);
+ clk_disable_unprepare(info->clk);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int vf610_adc_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct vf610_adc *info = iio_priv(indio_dev);
+ int hc_cfg;
+
+ /* ADC controller enters to stop mode */
+ hc_cfg = readl(info->regs + VF610_REG_ADC_HC0);
+ hc_cfg |= VF610_ADC_CONV_DISABLE;
+ writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
+
+ clk_disable_unprepare(info->clk);
+ regulator_disable(info->vref);
+
+ return 0;
+}
+
+static int vf610_adc_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct vf610_adc *info = iio_priv(indio_dev);
+ int ret;
+
+ ret = regulator_enable(info->vref);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret)
+ goto disable_reg;
+
+ vf610_adc_hw_init(info);
+
+ return 0;
+
+disable_reg:
+ regulator_disable(info->vref);
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops, vf610_adc_suspend, vf610_adc_resume);
+
+static struct platform_driver vf610_adc_driver = {
+ .probe = vf610_adc_probe,
+ .remove = vf610_adc_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = vf610_adc_match,
+ .pm = &vf610_adc_pm_ops,
+ },
+};
+
+module_platform_driver(vf610_adc_driver);
+
+MODULE_AUTHOR("Fugang Duan <B38611@freescale.com>");
+MODULE_DESCRIPTION("Freescale VF610 ADC driver");
+MODULE_LICENSE("GPL v2");
Code Review / kvmfornfv.git / blobdiff