--- /dev/null
+/*
+ Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
+ Philip Edelbrock <phil@netroedge.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+*/
+
+/* Note: we assume there can only be one SIS5595 with one SMBus interface */
+
+/*
+ Note: all have mfr. ID 0x1039.
+ SUPPORTED PCI ID
+ 5595 0008
+
+ Note: these chips contain a 0008 device which is incompatible with the
+ 5595. We recognize these by the presence of the listed
+ "blacklist" PCI ID and refuse to load.
+
+ NOT SUPPORTED PCI ID BLACKLIST PCI ID
+ 540 0008 0540
+ 550 0008 0550
+ 5513 0008 5511
+ 5581 0008 5597
+ 5582 0008 5597
+ 5597 0008 5597
+ 5598 0008 5597/5598
+ 630 0008 0630
+ 645 0008 0645
+ 646 0008 0646
+ 648 0008 0648
+ 650 0008 0650
+ 651 0008 0651
+ 730 0008 0730
+ 735 0008 0735
+ 745 0008 0745
+ 746 0008 0746
+*/
+
+/* TO DO:
+ * Add Block Transfers (ugly, but supported by the adapter)
+ * Add adapter resets
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+static int blacklist[] = {
+ PCI_DEVICE_ID_SI_540,
+ PCI_DEVICE_ID_SI_550,
+ PCI_DEVICE_ID_SI_630,
+ PCI_DEVICE_ID_SI_645,
+ PCI_DEVICE_ID_SI_646,
+ PCI_DEVICE_ID_SI_648,
+ PCI_DEVICE_ID_SI_650,
+ PCI_DEVICE_ID_SI_651,
+ PCI_DEVICE_ID_SI_730,
+ PCI_DEVICE_ID_SI_735,
+ PCI_DEVICE_ID_SI_745,
+ PCI_DEVICE_ID_SI_746,
+ PCI_DEVICE_ID_SI_5511, /* 5513 chip has the 0008 device but that ID
+ shows up in other chips so we use the 5511
+ ID for recognition */
+ PCI_DEVICE_ID_SI_5597,
+ PCI_DEVICE_ID_SI_5598,
+ 0, /* terminates the list */
+};
+
+/* Length of ISA address segment */
+#define SIS5595_EXTENT 8
+/* SIS5595 SMBus registers */
+#define SMB_STS_LO 0x00
+#define SMB_STS_HI 0x01
+#define SMB_CTL_LO 0x02
+#define SMB_CTL_HI 0x03
+#define SMB_ADDR 0x04
+#define SMB_CMD 0x05
+#define SMB_PCNT 0x06
+#define SMB_CNT 0x07
+#define SMB_BYTE 0x08
+#define SMB_DEV 0x10
+#define SMB_DB0 0x11
+#define SMB_DB1 0x12
+#define SMB_HAA 0x13
+
+/* PCI Address Constants */
+#define SMB_INDEX 0x38
+#define SMB_DAT 0x39
+#define SIS5595_ENABLE_REG 0x40
+#define ACPI_BASE 0x90
+
+/* Other settings */
+#define MAX_TIMEOUT 500
+
+/* SIS5595 constants */
+#define SIS5595_QUICK 0x00
+#define SIS5595_BYTE 0x02
+#define SIS5595_BYTE_DATA 0x04
+#define SIS5595_WORD_DATA 0x06
+#define SIS5595_PROC_CALL 0x08
+#define SIS5595_BLOCK_DATA 0x0A
+
+/* insmod parameters */
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+ the device at the given address. */
+static u16 force_addr;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller");
+
+static struct pci_driver sis5595_driver;
+static unsigned short sis5595_base;
+static struct pci_dev *sis5595_pdev;
+
+static u8 sis5595_read(u8 reg)
+{
+ outb(reg, sis5595_base + SMB_INDEX);
+ return inb(sis5595_base + SMB_DAT);
+}
+
+static void sis5595_write(u8 reg, u8 data)
+{
+ outb(reg, sis5595_base + SMB_INDEX);
+ outb(data, sis5595_base + SMB_DAT);
+}
+
+static int sis5595_setup(struct pci_dev *SIS5595_dev)
+{
+ u16 a;
+ u8 val;
+ int *i;
+ int retval;
+
+ /* Look for imposters */
+ for (i = blacklist; *i != 0; i++) {
+ struct pci_dev *dev;
+ dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL);
+ if (dev) {
+ dev_err(&SIS5595_dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i);
+ pci_dev_put(dev);
+ return -ENODEV;
+ }
+ }
+
+ /* Determine the address of the SMBus areas */
+ pci_read_config_word(SIS5595_dev, ACPI_BASE, &sis5595_base);
+ if (sis5595_base == 0 && force_addr == 0) {
+ dev_err(&SIS5595_dev->dev, "ACPI base address uninitialized - upgrade BIOS or use force_addr=0xaddr\n");
+ return -ENODEV;
+ }
+
+ if (force_addr)
+ sis5595_base = force_addr & ~(SIS5595_EXTENT - 1);
+ dev_dbg(&SIS5595_dev->dev, "ACPI Base address: %04x\n", sis5595_base);
+
+ /* NB: We grab just the two SMBus registers here, but this may still
+ * interfere with ACPI :-( */
+ retval = acpi_check_region(sis5595_base + SMB_INDEX, 2,
+ sis5595_driver.name);
+ if (retval)
+ return retval;
+
+ if (!request_region(sis5595_base + SMB_INDEX, 2,
+ sis5595_driver.name)) {
+ dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n",
+ sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1);
+ return -ENODEV;
+ }
+
+ if (force_addr) {
+ dev_info(&SIS5595_dev->dev, "forcing ISA address 0x%04X\n", sis5595_base);
+ if (pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base)
+ != PCIBIOS_SUCCESSFUL)
+ goto error;
+ if (pci_read_config_word(SIS5595_dev, ACPI_BASE, &a)
+ != PCIBIOS_SUCCESSFUL)
+ goto error;
+ if ((a & ~(SIS5595_EXTENT - 1)) != sis5595_base) {
+ /* doesn't work for some chips! */
+ dev_err(&SIS5595_dev->dev, "force address failed - not supported?\n");
+ goto error;
+ }
+ }
+
+ if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
+ != PCIBIOS_SUCCESSFUL)
+ goto error;
+ if ((val & 0x80) == 0) {
+ dev_info(&SIS5595_dev->dev, "enabling ACPI\n");
+ if (pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80)
+ != PCIBIOS_SUCCESSFUL)
+ goto error;
+ if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
+ != PCIBIOS_SUCCESSFUL)
+ goto error;
+ if ((val & 0x80) == 0) {
+ /* doesn't work for some chips? */
+ dev_err(&SIS5595_dev->dev, "ACPI enable failed - not supported?\n");
+ goto error;
+ }
+ }
+
+ /* Everything is happy */
+ return 0;
+
+error:
+ release_region(sis5595_base + SMB_INDEX, 2);
+ return -ENODEV;
+}
+
+static int sis5595_transaction(struct i2c_adapter *adap)
+{
+ int temp;
+ int result = 0;
+ int timeout = 0;
+
+ /* Make sure the SMBus host is ready to start transmitting */
+ temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
+ if (temp != 0x00) {
+ dev_dbg(&adap->dev, "SMBus busy (%04x). Resetting...\n", temp);
+ sis5595_write(SMB_STS_LO, temp & 0xff);
+ sis5595_write(SMB_STS_HI, temp >> 8);
+ if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) {
+ dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
+ return -EBUSY;
+ } else {
+ dev_dbg(&adap->dev, "Successful!\n");
+ }
+ }
+
+ /* start the transaction by setting bit 4 */
+ sis5595_write(SMB_CTL_LO, sis5595_read(SMB_CTL_LO) | 0x10);
+
+ /* We will always wait for a fraction of a second! */
+ do {
+ msleep(1);
+ temp = sis5595_read(SMB_STS_LO);
+ } while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT));
+
+ /* If the SMBus is still busy, we give up */
+ if (timeout > MAX_TIMEOUT) {
+ dev_dbg(&adap->dev, "SMBus Timeout!\n");
+ result = -ETIMEDOUT;
+ }
+
+ if (temp & 0x10) {
+ dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
+ result = -ENXIO;
+ }
+
+ if (temp & 0x20) {
+ dev_err(&adap->dev, "Bus collision! SMBus may be locked until "
+ "next hard reset (or not...)\n");
+ /* Clock stops and slave is stuck in mid-transmission */
+ result = -EIO;
+ }
+
+ temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
+ if (temp != 0x00) {
+ sis5595_write(SMB_STS_LO, temp & 0xff);
+ sis5595_write(SMB_STS_HI, temp >> 8);
+ }
+
+ temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
+ if (temp != 0x00)
+ dev_dbg(&adap->dev, "Failed reset at end of transaction (%02x)\n", temp);
+
+ return result;
+}
+
+/* Return negative errno on error. */
+static s32 sis5595_access(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data *data)
+{
+ int status;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+ size = SIS5595_QUICK;
+ break;
+ case I2C_SMBUS_BYTE:
+ sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+ if (read_write == I2C_SMBUS_WRITE)
+ sis5595_write(SMB_CMD, command);
+ size = SIS5595_BYTE;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+ sis5595_write(SMB_CMD, command);
+ if (read_write == I2C_SMBUS_WRITE)
+ sis5595_write(SMB_BYTE, data->byte);
+ size = SIS5595_BYTE_DATA;
+ break;
+ case I2C_SMBUS_PROC_CALL:
+ case I2C_SMBUS_WORD_DATA:
+ sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+ sis5595_write(SMB_CMD, command);
+ if (read_write == I2C_SMBUS_WRITE) {
+ sis5595_write(SMB_BYTE, data->word & 0xff);
+ sis5595_write(SMB_BYTE + 1,
+ (data->word & 0xff00) >> 8);
+ }
+ size = (size == I2C_SMBUS_PROC_CALL) ? SIS5595_PROC_CALL : SIS5595_WORD_DATA;
+ break;
+ default:
+ dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
+ }
+
+ sis5595_write(SMB_CTL_LO, ((size & 0x0E)));
+
+ status = sis5595_transaction(adap);
+ if (status)
+ return status;
+
+ if ((size != SIS5595_PROC_CALL) &&
+ ((read_write == I2C_SMBUS_WRITE) || (size == SIS5595_QUICK)))
+ return 0;
+
+
+ switch (size) {
+ case SIS5595_BYTE:
+ case SIS5595_BYTE_DATA:
+ data->byte = sis5595_read(SMB_BYTE);
+ break;
+ case SIS5595_WORD_DATA:
+ case SIS5595_PROC_CALL:
+ data->word = sis5595_read(SMB_BYTE) + (sis5595_read(SMB_BYTE + 1) << 8);
+ break;
+ }
+ return 0;
+}
+
+static u32 sis5595_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_PROC_CALL;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+ .smbus_xfer = sis5595_access,
+ .functionality = sis5595_func,
+};
+
+static struct i2c_adapter sis5595_adapter = {
+ .owner = THIS_MODULE,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+ .algo = &smbus_algorithm,
+};
+
+static const struct pci_device_id sis5595_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, sis5595_ids);
+
+static int sis5595_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int err;
+
+ if (sis5595_setup(dev)) {
+ dev_err(&dev->dev, "SIS5595 not detected, module not inserted.\n");
+ return -ENODEV;
+ }
+
+ /* set up the sysfs linkage to our parent device */
+ sis5595_adapter.dev.parent = &dev->dev;
+
+ snprintf(sis5595_adapter.name, sizeof(sis5595_adapter.name),
+ "SMBus SIS5595 adapter at %04x", sis5595_base + SMB_INDEX);
+ err = i2c_add_adapter(&sis5595_adapter);
+ if (err) {
+ release_region(sis5595_base + SMB_INDEX, 2);
+ return err;
+ }
+
+ /* Always return failure here. This is to allow other drivers to bind
+ * to this pci device. We don't really want to have control over the
+ * pci device, we only wanted to read as few register values from it.
+ */
+ sis5595_pdev = pci_dev_get(dev);
+ return -ENODEV;
+}
+
+static struct pci_driver sis5595_driver = {
+ .name = "sis5595_smbus",
+ .id_table = sis5595_ids,
+ .probe = sis5595_probe,
+};
+
+static int __init i2c_sis5595_init(void)
+{
+ return pci_register_driver(&sis5595_driver);
+}
+
+static void __exit i2c_sis5595_exit(void)
+{
+ pci_unregister_driver(&sis5595_driver);
+ if (sis5595_pdev) {
+ i2c_del_adapter(&sis5595_adapter);
+ release_region(sis5595_base + SMB_INDEX, 2);
+ pci_dev_put(sis5595_pdev);
+ sis5595_pdev = NULL;
+ }
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_DESCRIPTION("SIS5595 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_sis5595_init);
+module_exit(i2c_sis5595_exit);
Code Review / kvmfornfv.git / blobdiff