Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / gpu / drm / msm / edp / edp_ctrl.c
diff --git a/kernel/drivers/gpu/drm/msm/edp/edp_ctrl.c b/kernel/drivers/gpu/drm/msm/edp/edp_ctrl.c
new file mode 100644 (file)
index 0000000..29e52d7
--- /dev/null
@@ -0,0 +1,1374 @@
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#include "drm_crtc.h"
+#include "drm_dp_helper.h"
+#include "drm_edid.h"
+#include "edp.h"
+#include "edp.xml.h"
+
+#define VDDA_MIN_UV            1800000 /* uV units */
+#define VDDA_MAX_UV            1800000 /* uV units */
+#define VDDA_UA_ON_LOAD                100000  /* uA units */
+#define VDDA_UA_OFF_LOAD       100     /* uA units */
+
+#define DPCD_LINK_VOLTAGE_MAX          4
+#define DPCD_LINK_PRE_EMPHASIS_MAX     4
+
+#define EDP_LINK_BW_MAX                DP_LINK_BW_2_7
+
+/* Link training return value */
+#define EDP_TRAIN_FAIL         -1
+#define EDP_TRAIN_SUCCESS      0
+#define EDP_TRAIN_RECONFIG     1
+
+#define EDP_CLK_MASK_AHB               BIT(0)
+#define EDP_CLK_MASK_AUX               BIT(1)
+#define EDP_CLK_MASK_LINK              BIT(2)
+#define EDP_CLK_MASK_PIXEL             BIT(3)
+#define EDP_CLK_MASK_MDP_CORE          BIT(4)
+#define EDP_CLK_MASK_LINK_CHAN (EDP_CLK_MASK_LINK | EDP_CLK_MASK_PIXEL)
+#define EDP_CLK_MASK_AUX_CHAN  \
+       (EDP_CLK_MASK_AHB | EDP_CLK_MASK_AUX | EDP_CLK_MASK_MDP_CORE)
+#define EDP_CLK_MASK_ALL       (EDP_CLK_MASK_AUX_CHAN | EDP_CLK_MASK_LINK_CHAN)
+
+#define EDP_BACKLIGHT_MAX      255
+
+#define EDP_INTR_STATUS1       \
+       (EDP_INTERRUPT_REG_1_HPD | EDP_INTERRUPT_REG_1_AUX_I2C_DONE | \
+       EDP_INTERRUPT_REG_1_WRONG_ADDR | EDP_INTERRUPT_REG_1_TIMEOUT | \
+       EDP_INTERRUPT_REG_1_NACK_DEFER | EDP_INTERRUPT_REG_1_WRONG_DATA_CNT | \
+       EDP_INTERRUPT_REG_1_I2C_NACK | EDP_INTERRUPT_REG_1_I2C_DEFER | \
+       EDP_INTERRUPT_REG_1_PLL_UNLOCK | EDP_INTERRUPT_REG_1_AUX_ERROR)
+#define EDP_INTR_MASK1 (EDP_INTR_STATUS1 << 2)
+#define EDP_INTR_STATUS2       \
+       (EDP_INTERRUPT_REG_2_READY_FOR_VIDEO | \
+       EDP_INTERRUPT_REG_2_IDLE_PATTERNs_SENT | \
+       EDP_INTERRUPT_REG_2_FRAME_END | EDP_INTERRUPT_REG_2_CRC_UPDATED)
+#define EDP_INTR_MASK2 (EDP_INTR_STATUS2 << 2)
+
+struct edp_ctrl {
+       struct platform_device *pdev;
+
+       void __iomem *base;
+
+       /* regulators */
+       struct regulator *vdda_vreg;
+       struct regulator *lvl_vreg;
+
+       /* clocks */
+       struct clk *aux_clk;
+       struct clk *pixel_clk;
+       struct clk *ahb_clk;
+       struct clk *link_clk;
+       struct clk *mdp_core_clk;
+
+       /* gpios */
+       struct gpio_desc *panel_en_gpio;
+       struct gpio_desc *panel_hpd_gpio;
+
+       /* completion and mutex */
+       struct completion idle_comp;
+       struct mutex dev_mutex; /* To protect device power status */
+
+       /* work queue */
+       struct work_struct on_work;
+       struct work_struct off_work;
+       struct workqueue_struct *workqueue;
+
+       /* Interrupt register lock */
+       spinlock_t irq_lock;
+
+       bool edp_connected;
+       bool power_on;
+
+       /* edid raw data */
+       struct edid *edid;
+
+       struct drm_dp_link dp_link;
+       struct drm_dp_aux *drm_aux;
+
+       /* dpcd raw data */
+       u8 dpcd[DP_RECEIVER_CAP_SIZE];
+
+       /* Link status */
+       u8 link_rate;
+       u8 lane_cnt;
+       u8 v_level;
+       u8 p_level;
+
+       /* Timing status */
+       u8 interlaced;
+       u32 pixel_rate; /* in kHz */
+       u32 color_depth;
+
+       struct edp_aux *aux;
+       struct edp_phy *phy;
+};
+
+struct edp_pixel_clk_div {
+       u32 rate; /* in kHz */
+       u32 m;
+       u32 n;
+};
+
+#define EDP_PIXEL_CLK_NUM 8
+static const struct edp_pixel_clk_div clk_divs[2][EDP_PIXEL_CLK_NUM] = {
+       { /* Link clock = 162MHz, source clock = 810MHz */
+               {119000, 31,  211}, /* WSXGA+ 1680x1050@60Hz CVT */
+               {130250, 32,  199}, /* UXGA 1600x1200@60Hz CVT */
+               {148500, 11,  60},  /* FHD 1920x1080@60Hz */
+               {154000, 50,  263}, /* WUXGA 1920x1200@60Hz CVT */
+               {209250, 31,  120}, /* QXGA 2048x1536@60Hz CVT */
+               {268500, 119, 359}, /* WQXGA 2560x1600@60Hz CVT */
+               {138530, 33,  193}, /* AUO B116HAN03.0 Panel */
+               {141400, 48,  275}, /* AUO B133HTN01.2 Panel */
+       },
+       { /* Link clock = 270MHz, source clock = 675MHz */
+               {119000, 52,  295}, /* WSXGA+ 1680x1050@60Hz CVT */
+               {130250, 11,  57},  /* UXGA 1600x1200@60Hz CVT */
+               {148500, 11,  50},  /* FHD 1920x1080@60Hz */
+               {154000, 47,  206}, /* WUXGA 1920x1200@60Hz CVT */
+               {209250, 31,  100}, /* QXGA 2048x1536@60Hz CVT */
+               {268500, 107, 269}, /* WQXGA 2560x1600@60Hz CVT */
+               {138530, 63,  307}, /* AUO B116HAN03.0 Panel */
+               {141400, 53,  253}, /* AUO B133HTN01.2 Panel */
+       },
+};
+
+static int edp_clk_init(struct edp_ctrl *ctrl)
+{
+       struct device *dev = &ctrl->pdev->dev;
+       int ret;
+
+       ctrl->aux_clk = devm_clk_get(dev, "core_clk");
+       if (IS_ERR(ctrl->aux_clk)) {
+               ret = PTR_ERR(ctrl->aux_clk);
+               pr_err("%s: Can't find aux_clk, %d\n", __func__, ret);
+               ctrl->aux_clk = NULL;
+               return ret;
+       }
+
+       ctrl->pixel_clk = devm_clk_get(dev, "pixel_clk");
+       if (IS_ERR(ctrl->pixel_clk)) {
+               ret = PTR_ERR(ctrl->pixel_clk);
+               pr_err("%s: Can't find pixel_clk, %d\n", __func__, ret);
+               ctrl->pixel_clk = NULL;
+               return ret;
+       }
+
+       ctrl->ahb_clk = devm_clk_get(dev, "iface_clk");
+       if (IS_ERR(ctrl->ahb_clk)) {
+               ret = PTR_ERR(ctrl->ahb_clk);
+               pr_err("%s: Can't find ahb_clk, %d\n", __func__, ret);
+               ctrl->ahb_clk = NULL;
+               return ret;
+       }
+
+       ctrl->link_clk = devm_clk_get(dev, "link_clk");
+       if (IS_ERR(ctrl->link_clk)) {
+               ret = PTR_ERR(ctrl->link_clk);
+               pr_err("%s: Can't find link_clk, %d\n", __func__, ret);
+               ctrl->link_clk = NULL;
+               return ret;
+       }
+
+       /* need mdp core clock to receive irq */
+       ctrl->mdp_core_clk = devm_clk_get(dev, "mdp_core_clk");
+       if (IS_ERR(ctrl->mdp_core_clk)) {
+               ret = PTR_ERR(ctrl->mdp_core_clk);
+               pr_err("%s: Can't find mdp_core_clk, %d\n", __func__, ret);
+               ctrl->mdp_core_clk = NULL;
+               return ret;
+       }
+
+       return 0;
+}
+
+static int edp_clk_enable(struct edp_ctrl *ctrl, u32 clk_mask)
+{
+       int ret;
+
+       DBG("mask=%x", clk_mask);
+       /* ahb_clk should be enabled first */
+       if (clk_mask & EDP_CLK_MASK_AHB) {
+               ret = clk_prepare_enable(ctrl->ahb_clk);
+               if (ret) {
+                       pr_err("%s: Failed to enable ahb clk\n", __func__);
+                       goto f0;
+               }
+       }
+       if (clk_mask & EDP_CLK_MASK_AUX) {
+               ret = clk_set_rate(ctrl->aux_clk, 19200000);
+               if (ret) {
+                       pr_err("%s: Failed to set rate aux clk\n", __func__);
+                       goto f1;
+               }
+               ret = clk_prepare_enable(ctrl->aux_clk);
+               if (ret) {
+                       pr_err("%s: Failed to enable aux clk\n", __func__);
+                       goto f1;
+               }
+       }
+       /* Need to set rate and enable link_clk prior to pixel_clk */
+       if (clk_mask & EDP_CLK_MASK_LINK) {
+               DBG("edp->link_clk, set_rate %ld",
+                               (unsigned long)ctrl->link_rate * 27000000);
+               ret = clk_set_rate(ctrl->link_clk,
+                               (unsigned long)ctrl->link_rate * 27000000);
+               if (ret) {
+                       pr_err("%s: Failed to set rate to link clk\n",
+                               __func__);
+                       goto f2;
+               }
+
+               ret = clk_prepare_enable(ctrl->link_clk);
+               if (ret) {
+                       pr_err("%s: Failed to enable link clk\n", __func__);
+                       goto f2;
+               }
+       }
+       if (clk_mask & EDP_CLK_MASK_PIXEL) {
+               DBG("edp->pixel_clk, set_rate %ld",
+                               (unsigned long)ctrl->pixel_rate * 1000);
+               ret = clk_set_rate(ctrl->pixel_clk,
+                               (unsigned long)ctrl->pixel_rate * 1000);
+               if (ret) {
+                       pr_err("%s: Failed to set rate to pixel clk\n",
+                               __func__);
+                       goto f3;
+               }
+
+               ret = clk_prepare_enable(ctrl->pixel_clk);
+               if (ret) {
+                       pr_err("%s: Failed to enable pixel clk\n", __func__);
+                       goto f3;
+               }
+       }
+       if (clk_mask & EDP_CLK_MASK_MDP_CORE) {
+               ret = clk_prepare_enable(ctrl->mdp_core_clk);
+               if (ret) {
+                       pr_err("%s: Failed to enable mdp core clk\n", __func__);
+                       goto f4;
+               }
+       }
+
+       return 0;
+
+f4:
+       if (clk_mask & EDP_CLK_MASK_PIXEL)
+               clk_disable_unprepare(ctrl->pixel_clk);
+f3:
+       if (clk_mask & EDP_CLK_MASK_LINK)
+               clk_disable_unprepare(ctrl->link_clk);
+f2:
+       if (clk_mask & EDP_CLK_MASK_AUX)
+               clk_disable_unprepare(ctrl->aux_clk);
+f1:
+       if (clk_mask & EDP_CLK_MASK_AHB)
+               clk_disable_unprepare(ctrl->ahb_clk);
+f0:
+       return ret;
+}
+
+static void edp_clk_disable(struct edp_ctrl *ctrl, u32 clk_mask)
+{
+       if (clk_mask & EDP_CLK_MASK_MDP_CORE)
+               clk_disable_unprepare(ctrl->mdp_core_clk);
+       if (clk_mask & EDP_CLK_MASK_PIXEL)
+               clk_disable_unprepare(ctrl->pixel_clk);
+       if (clk_mask & EDP_CLK_MASK_LINK)
+               clk_disable_unprepare(ctrl->link_clk);
+       if (clk_mask & EDP_CLK_MASK_AUX)
+               clk_disable_unprepare(ctrl->aux_clk);
+       if (clk_mask & EDP_CLK_MASK_AHB)
+               clk_disable_unprepare(ctrl->ahb_clk);
+}
+
+static int edp_regulator_init(struct edp_ctrl *ctrl)
+{
+       struct device *dev = &ctrl->pdev->dev;
+
+       DBG("");
+       ctrl->vdda_vreg = devm_regulator_get(dev, "vdda");
+       if (IS_ERR(ctrl->vdda_vreg)) {
+               pr_err("%s: Could not get vdda reg, ret = %ld\n", __func__,
+                               PTR_ERR(ctrl->vdda_vreg));
+               ctrl->vdda_vreg = NULL;
+               return PTR_ERR(ctrl->vdda_vreg);
+       }
+       ctrl->lvl_vreg = devm_regulator_get(dev, "lvl-vdd");
+       if (IS_ERR(ctrl->lvl_vreg)) {
+               pr_err("Could not get lvl-vdd reg, %ld",
+                               PTR_ERR(ctrl->lvl_vreg));
+               ctrl->lvl_vreg = NULL;
+               return PTR_ERR(ctrl->lvl_vreg);
+       }
+
+       return 0;
+}
+
+static int edp_regulator_enable(struct edp_ctrl *ctrl)
+{
+       int ret;
+
+       ret = regulator_set_voltage(ctrl->vdda_vreg, VDDA_MIN_UV, VDDA_MAX_UV);
+       if (ret) {
+               pr_err("%s:vdda_vreg set_voltage failed, %d\n", __func__, ret);
+               goto vdda_set_fail;
+       }
+
+       ret = regulator_set_load(ctrl->vdda_vreg, VDDA_UA_ON_LOAD);
+       if (ret < 0) {
+               pr_err("%s: vdda_vreg set regulator mode failed.\n", __func__);
+               goto vdda_set_fail;
+       }
+
+       ret = regulator_enable(ctrl->vdda_vreg);
+       if (ret) {
+               pr_err("%s: Failed to enable vdda_vreg regulator.\n", __func__);
+               goto vdda_enable_fail;
+       }
+
+       ret = regulator_enable(ctrl->lvl_vreg);
+       if (ret) {
+               pr_err("Failed to enable lvl-vdd reg regulator, %d", ret);
+               goto lvl_enable_fail;
+       }
+
+       DBG("exit");
+       return 0;
+
+lvl_enable_fail:
+       regulator_disable(ctrl->vdda_vreg);
+vdda_enable_fail:
+       regulator_set_load(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD);
+vdda_set_fail:
+       return ret;
+}
+
+static void edp_regulator_disable(struct edp_ctrl *ctrl)
+{
+       regulator_disable(ctrl->lvl_vreg);
+       regulator_disable(ctrl->vdda_vreg);
+       regulator_set_load(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD);
+}
+
+static int edp_gpio_config(struct edp_ctrl *ctrl)
+{
+       struct device *dev = &ctrl->pdev->dev;
+       int ret;
+
+       ctrl->panel_hpd_gpio = devm_gpiod_get(dev, "panel-hpd");
+       if (IS_ERR(ctrl->panel_hpd_gpio)) {
+               ret = PTR_ERR(ctrl->panel_hpd_gpio);
+               ctrl->panel_hpd_gpio = NULL;
+               pr_err("%s: cannot get panel-hpd-gpios, %d\n", __func__, ret);
+               return ret;
+       }
+
+       ret = gpiod_direction_input(ctrl->panel_hpd_gpio);
+       if (ret) {
+               pr_err("%s: Set direction for hpd failed, %d\n", __func__, ret);
+               return ret;
+       }
+
+       ctrl->panel_en_gpio = devm_gpiod_get(dev, "panel-en");
+       if (IS_ERR(ctrl->panel_en_gpio)) {
+               ret = PTR_ERR(ctrl->panel_en_gpio);
+               ctrl->panel_en_gpio = NULL;
+               pr_err("%s: cannot get panel-en-gpios, %d\n", __func__, ret);
+               return ret;
+       }
+
+       ret = gpiod_direction_output(ctrl->panel_en_gpio, 0);
+       if (ret) {
+               pr_err("%s: Set direction for panel_en failed, %d\n",
+                               __func__, ret);
+               return ret;
+       }
+
+       DBG("gpio on");
+
+       return 0;
+}
+
+static void edp_ctrl_irq_enable(struct edp_ctrl *ctrl, int enable)
+{
+       unsigned long flags;
+
+       DBG("%d", enable);
+       spin_lock_irqsave(&ctrl->irq_lock, flags);
+       if (enable) {
+               edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, EDP_INTR_MASK1);
+               edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, EDP_INTR_MASK2);
+       } else {
+               edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, 0x0);
+               edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, 0x0);
+       }
+       spin_unlock_irqrestore(&ctrl->irq_lock, flags);
+       DBG("exit");
+}
+
+static void edp_fill_link_cfg(struct edp_ctrl *ctrl)
+{
+       u32 prate;
+       u32 lrate;
+       u32 bpp;
+       u8 max_lane = ctrl->dp_link.num_lanes;
+       u8 lane;
+
+       prate = ctrl->pixel_rate;
+       bpp = ctrl->color_depth * 3;
+
+       /*
+        * By default, use the maximum link rate and minimum lane count,
+        * so that we can do rate down shift during link training.
+        */
+       ctrl->link_rate = drm_dp_link_rate_to_bw_code(ctrl->dp_link.rate);
+
+       prate *= bpp;
+       prate /= 8; /* in kByte */
+
+       lrate = 270000; /* in kHz */
+       lrate *= ctrl->link_rate;
+       lrate /= 10; /* in kByte, 10 bits --> 8 bits */
+
+       for (lane = 1; lane <= max_lane; lane <<= 1) {
+               if (lrate >= prate)
+                       break;
+               lrate <<= 1;
+       }
+
+       ctrl->lane_cnt = lane;
+       DBG("rate=%d lane=%d", ctrl->link_rate, ctrl->lane_cnt);
+}
+
+static void edp_config_ctrl(struct edp_ctrl *ctrl)
+{
+       u32 data;
+       enum edp_color_depth depth;
+
+       data = EDP_CONFIGURATION_CTRL_LANES(ctrl->lane_cnt - 1);
+
+       if (ctrl->dp_link.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
+               data |= EDP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
+
+       depth = EDP_6BIT;
+       if (ctrl->color_depth == 8)
+               depth = EDP_8BIT;
+
+       data |= EDP_CONFIGURATION_CTRL_COLOR(depth);
+
+       if (!ctrl->interlaced)  /* progressive */
+               data |= EDP_CONFIGURATION_CTRL_PROGRESSIVE;
+
+       data |= (EDP_CONFIGURATION_CTRL_SYNC_CLK |
+               EDP_CONFIGURATION_CTRL_STATIC_MVID);
+
+       edp_write(ctrl->base + REG_EDP_CONFIGURATION_CTRL, data);
+}
+
+static void edp_state_ctrl(struct edp_ctrl *ctrl, u32 state)
+{
+       edp_write(ctrl->base + REG_EDP_STATE_CTRL, state);
+       /* Make sure H/W status is set */
+       wmb();
+}
+
+static int edp_lane_set_write(struct edp_ctrl *ctrl,
+       u8 voltage_level, u8 pre_emphasis_level)
+{
+       int i;
+       u8 buf[4];
+
+       if (voltage_level >= DPCD_LINK_VOLTAGE_MAX)
+               voltage_level |= 0x04;
+
+       if (pre_emphasis_level >= DPCD_LINK_PRE_EMPHASIS_MAX)
+               pre_emphasis_level |= 0x04;
+
+       pre_emphasis_level <<= 3;
+
+       for (i = 0; i < 4; i++)
+               buf[i] = voltage_level | pre_emphasis_level;
+
+       DBG("%s: p|v=0x%x", __func__, voltage_level | pre_emphasis_level);
+       if (drm_dp_dpcd_write(ctrl->drm_aux, 0x103, buf, 4) < 4) {
+               pr_err("%s: Set sw/pe to panel failed\n", __func__);
+               return -ENOLINK;
+       }
+
+       return 0;
+}
+
+static int edp_train_pattern_set_write(struct edp_ctrl *ctrl, u8 pattern)
+{
+       u8 p = pattern;
+
+       DBG("pattern=%x", p);
+       if (drm_dp_dpcd_write(ctrl->drm_aux,
+                               DP_TRAINING_PATTERN_SET, &p, 1) < 1) {
+               pr_err("%s: Set training pattern to panel failed\n", __func__);
+               return -ENOLINK;
+       }
+
+       return 0;
+}
+
+static void edp_sink_train_set_adjust(struct edp_ctrl *ctrl,
+       const u8 *link_status)
+{
+       int i;
+       u8 max = 0;
+       u8 data;
+
+       /* use the max level across lanes */
+       for (i = 0; i < ctrl->lane_cnt; i++) {
+               data = drm_dp_get_adjust_request_voltage(link_status, i);
+               DBG("lane=%d req_voltage_swing=0x%x", i, data);
+               if (max < data)
+                       max = data;
+       }
+
+       ctrl->v_level = max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
+
+       /* use the max level across lanes */
+       max = 0;
+       for (i = 0; i < ctrl->lane_cnt; i++) {
+               data = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
+               DBG("lane=%d req_pre_emphasis=0x%x", i, data);
+               if (max < data)
+                       max = data;
+       }
+
+       ctrl->p_level = max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
+       DBG("v_level=%d, p_level=%d", ctrl->v_level, ctrl->p_level);
+}
+
+static void edp_host_train_set(struct edp_ctrl *ctrl, u32 train)
+{
+       int cnt = 10;
+       u32 data;
+       u32 shift = train - 1;
+
+       DBG("train=%d", train);
+
+       edp_state_ctrl(ctrl, EDP_STATE_CTRL_TRAIN_PATTERN_1 << shift);
+       while (--cnt) {
+               data = edp_read(ctrl->base + REG_EDP_MAINLINK_READY);
+               if (data & (EDP_MAINLINK_READY_TRAIN_PATTERN_1_READY << shift))
+                       break;
+       }
+
+       if (cnt == 0)
+               pr_err("%s: set link_train=%d failed\n", __func__, train);
+}
+
+static const u8 vm_pre_emphasis[4][4] = {
+       {0x03, 0x06, 0x09, 0x0C},       /* pe0, 0 db */
+       {0x03, 0x06, 0x09, 0xFF},       /* pe1, 3.5 db */
+       {0x03, 0x06, 0xFF, 0xFF},       /* pe2, 6.0 db */
+       {0x03, 0xFF, 0xFF, 0xFF}        /* pe3, 9.5 db */
+};
+
+/* voltage swing, 0.2v and 1.0v are not support */
+static const u8 vm_voltage_swing[4][4] = {
+       {0x14, 0x18, 0x1A, 0x1E}, /* sw0, 0.4v  */
+       {0x18, 0x1A, 0x1E, 0xFF}, /* sw1, 0.6 v */
+       {0x1A, 0x1E, 0xFF, 0xFF}, /* sw1, 0.8 v */
+       {0x1E, 0xFF, 0xFF, 0xFF}  /* sw1, 1.2 v, optional */
+};
+
+static int edp_voltage_pre_emphasise_set(struct edp_ctrl *ctrl)
+{
+       u32 value0;
+       u32 value1;
+
+       DBG("v=%d p=%d", ctrl->v_level, ctrl->p_level);
+
+       value0 = vm_pre_emphasis[(int)(ctrl->v_level)][(int)(ctrl->p_level)];
+       value1 = vm_voltage_swing[(int)(ctrl->v_level)][(int)(ctrl->p_level)];
+
+       /* Configure host and panel only if both values are allowed */
+       if (value0 != 0xFF && value1 != 0xFF) {
+               msm_edp_phy_vm_pe_cfg(ctrl->phy, value0, value1);
+               return edp_lane_set_write(ctrl, ctrl->v_level, ctrl->p_level);
+       }
+
+       return -EINVAL;
+}
+
+static int edp_start_link_train_1(struct edp_ctrl *ctrl)
+{
+       u8 link_status[DP_LINK_STATUS_SIZE];
+       u8 old_v_level;
+       int tries;
+       int ret;
+       int rlen;
+
+       DBG("");
+
+       edp_host_train_set(ctrl, DP_TRAINING_PATTERN_1);
+       ret = edp_voltage_pre_emphasise_set(ctrl);
+       if (ret)
+               return ret;
+       ret = edp_train_pattern_set_write(ctrl,
+                       DP_TRAINING_PATTERN_1 | DP_RECOVERED_CLOCK_OUT_EN);
+       if (ret)
+               return ret;
+
+       tries = 0;
+       old_v_level = ctrl->v_level;
+       while (1) {
+               drm_dp_link_train_clock_recovery_delay(ctrl->dpcd);
+
+               rlen = drm_dp_dpcd_read_link_status(ctrl->drm_aux, link_status);
+               if (rlen < DP_LINK_STATUS_SIZE) {
+                       pr_err("%s: read link status failed\n", __func__);
+                       return -ENOLINK;
+               }
+               if (drm_dp_clock_recovery_ok(link_status, ctrl->lane_cnt)) {
+                       ret = 0;
+                       break;
+               }
+
+               if (ctrl->v_level == DPCD_LINK_VOLTAGE_MAX) {
+                       ret = -1;
+                       break;
+               }
+
+               if (old_v_level == ctrl->v_level) {
+                       tries++;
+                       if (tries >= 5) {
+                               ret = -1;
+                               break;
+                       }
+               } else {
+                       tries = 0;
+                       old_v_level = ctrl->v_level;
+               }
+
+               edp_sink_train_set_adjust(ctrl, link_status);
+               ret = edp_voltage_pre_emphasise_set(ctrl);
+               if (ret)
+                       return ret;
+       }
+
+       return ret;
+}
+
+static int edp_start_link_train_2(struct edp_ctrl *ctrl)
+{
+       u8 link_status[DP_LINK_STATUS_SIZE];
+       int tries = 0;
+       int ret;
+       int rlen;
+
+       DBG("");
+
+       edp_host_train_set(ctrl, DP_TRAINING_PATTERN_2);
+       ret = edp_voltage_pre_emphasise_set(ctrl);
+       if (ret)
+               return ret;
+
+       ret = edp_train_pattern_set_write(ctrl,
+                       DP_TRAINING_PATTERN_2 | DP_RECOVERED_CLOCK_OUT_EN);
+       if (ret)
+               return ret;
+
+       while (1) {
+               drm_dp_link_train_channel_eq_delay(ctrl->dpcd);
+
+               rlen = drm_dp_dpcd_read_link_status(ctrl->drm_aux, link_status);
+               if (rlen < DP_LINK_STATUS_SIZE) {
+                       pr_err("%s: read link status failed\n", __func__);
+                       return -ENOLINK;
+               }
+               if (drm_dp_channel_eq_ok(link_status, ctrl->lane_cnt)) {
+                       ret = 0;
+                       break;
+               }
+
+               tries++;
+               if (tries > 10) {
+                       ret = -1;
+                       break;
+               }
+
+               edp_sink_train_set_adjust(ctrl, link_status);
+               ret = edp_voltage_pre_emphasise_set(ctrl);
+               if (ret)
+                       return ret;
+       }
+
+       return ret;
+}
+
+static int edp_link_rate_down_shift(struct edp_ctrl *ctrl)
+{
+       u32 prate, lrate, bpp;
+       u8 rate, lane, max_lane;
+       int changed = 0;
+
+       rate = ctrl->link_rate;
+       lane = ctrl->lane_cnt;
+       max_lane = ctrl->dp_link.num_lanes;
+
+       bpp = ctrl->color_depth * 3;
+       prate = ctrl->pixel_rate;
+       prate *= bpp;
+       prate /= 8; /* in kByte */
+
+       if (rate > DP_LINK_BW_1_62 && rate <= EDP_LINK_BW_MAX) {
+               rate -= 4;      /* reduce rate */
+               changed++;
+       }
+
+       if (changed) {
+               if (lane >= 1 && lane < max_lane)
+                       lane <<= 1;     /* increase lane */
+
+               lrate = 270000; /* in kHz */
+               lrate *= rate;
+               lrate /= 10; /* kByte, 10 bits --> 8 bits */
+               lrate *= lane;
+
+               DBG("new lrate=%u prate=%u(kHz) rate=%d lane=%d p=%u b=%d",
+                       lrate, prate, rate, lane,
+                       ctrl->pixel_rate,
+                       bpp);
+
+               if (lrate > prate) {
+                       ctrl->link_rate = rate;
+                       ctrl->lane_cnt = lane;
+                       DBG("new rate=%d %d", rate, lane);
+                       return 0;
+               }
+       }
+
+       return -EINVAL;
+}
+
+static int edp_clear_training_pattern(struct edp_ctrl *ctrl)
+{
+       int ret;
+
+       ret = edp_train_pattern_set_write(ctrl, 0);
+
+       drm_dp_link_train_channel_eq_delay(ctrl->dpcd);
+
+       return ret;
+}
+
+static int edp_do_link_train(struct edp_ctrl *ctrl)
+{
+       int ret;
+       struct drm_dp_link dp_link;
+
+       DBG("");
+       /*
+        * Set the current link rate and lane cnt to panel. They may have been
+        * adjusted and the values are different from them in DPCD CAP
+        */
+       dp_link.num_lanes = ctrl->lane_cnt;
+       dp_link.rate = drm_dp_bw_code_to_link_rate(ctrl->link_rate);
+       dp_link.capabilities = ctrl->dp_link.capabilities;
+       if (drm_dp_link_configure(ctrl->drm_aux, &dp_link) < 0)
+               return EDP_TRAIN_FAIL;
+
+       ctrl->v_level = 0; /* start from default level */
+       ctrl->p_level = 0;
+
+       edp_state_ctrl(ctrl, 0);
+       if (edp_clear_training_pattern(ctrl))
+               return EDP_TRAIN_FAIL;
+
+       ret = edp_start_link_train_1(ctrl);
+       if (ret < 0) {
+               if (edp_link_rate_down_shift(ctrl) == 0) {
+                       DBG("link reconfig");
+                       ret = EDP_TRAIN_RECONFIG;
+                       goto clear;
+               } else {
+                       pr_err("%s: Training 1 failed", __func__);
+                       ret = EDP_TRAIN_FAIL;
+                       goto clear;
+               }
+       }
+       DBG("Training 1 completed successfully");
+
+       edp_state_ctrl(ctrl, 0);
+       if (edp_clear_training_pattern(ctrl))
+               return EDP_TRAIN_FAIL;
+
+       ret = edp_start_link_train_2(ctrl);
+       if (ret < 0) {
+               if (edp_link_rate_down_shift(ctrl) == 0) {
+                       DBG("link reconfig");
+                       ret = EDP_TRAIN_RECONFIG;
+                       goto clear;
+               } else {
+                       pr_err("%s: Training 2 failed", __func__);
+                       ret = EDP_TRAIN_FAIL;
+                       goto clear;
+               }
+       }
+       DBG("Training 2 completed successfully");
+
+       edp_state_ctrl(ctrl, EDP_STATE_CTRL_SEND_VIDEO);
+clear:
+       edp_clear_training_pattern(ctrl);
+
+       return ret;
+}
+
+static void edp_clock_synchrous(struct edp_ctrl *ctrl, int sync)
+{
+       u32 data;
+       enum edp_color_depth depth;
+
+       data = edp_read(ctrl->base + REG_EDP_MISC1_MISC0);
+
+       if (sync)
+               data |= EDP_MISC1_MISC0_SYNC;
+       else
+               data &= ~EDP_MISC1_MISC0_SYNC;
+
+       /* only legacy rgb mode supported */
+       depth = EDP_6BIT; /* Default */
+       if (ctrl->color_depth == 8)
+               depth = EDP_8BIT;
+       else if (ctrl->color_depth == 10)
+               depth = EDP_10BIT;
+       else if (ctrl->color_depth == 12)
+               depth = EDP_12BIT;
+       else if (ctrl->color_depth == 16)
+               depth = EDP_16BIT;
+
+       data |= EDP_MISC1_MISC0_COLOR(depth);
+
+       edp_write(ctrl->base + REG_EDP_MISC1_MISC0, data);
+}
+
+static int edp_sw_mvid_nvid(struct edp_ctrl *ctrl, u32 m, u32 n)
+{
+       u32 n_multi, m_multi = 5;
+
+       if (ctrl->link_rate == DP_LINK_BW_1_62) {
+               n_multi = 1;
+       } else if (ctrl->link_rate == DP_LINK_BW_2_7) {
+               n_multi = 2;
+       } else {
+               pr_err("%s: Invalid link rate, %d\n", __func__,
+                       ctrl->link_rate);
+               return -EINVAL;
+       }
+
+       edp_write(ctrl->base + REG_EDP_SOFTWARE_MVID, m * m_multi);
+       edp_write(ctrl->base + REG_EDP_SOFTWARE_NVID, n * n_multi);
+
+       return 0;
+}
+
+static void edp_mainlink_ctrl(struct edp_ctrl *ctrl, int enable)
+{
+       u32 data = 0;
+
+       edp_write(ctrl->base + REG_EDP_MAINLINK_CTRL, EDP_MAINLINK_CTRL_RESET);
+       /* Make sure fully reset */
+       wmb();
+       usleep_range(500, 1000);
+
+       if (enable)
+               data |= EDP_MAINLINK_CTRL_ENABLE;
+
+       edp_write(ctrl->base + REG_EDP_MAINLINK_CTRL, data);
+}
+
+static void edp_ctrl_phy_aux_enable(struct edp_ctrl *ctrl, int enable)
+{
+       if (enable) {
+               edp_regulator_enable(ctrl);
+               edp_clk_enable(ctrl, EDP_CLK_MASK_AUX_CHAN);
+               msm_edp_phy_ctrl(ctrl->phy, 1);
+               msm_edp_aux_ctrl(ctrl->aux, 1);
+               gpiod_set_value(ctrl->panel_en_gpio, 1);
+       } else {
+               gpiod_set_value(ctrl->panel_en_gpio, 0);
+               msm_edp_aux_ctrl(ctrl->aux, 0);
+               msm_edp_phy_ctrl(ctrl->phy, 0);
+               edp_clk_disable(ctrl, EDP_CLK_MASK_AUX_CHAN);
+               edp_regulator_disable(ctrl);
+       }
+}
+
+static void edp_ctrl_link_enable(struct edp_ctrl *ctrl, int enable)
+{
+       u32 m, n;
+
+       if (enable) {
+               /* Enable link channel clocks */
+               edp_clk_enable(ctrl, EDP_CLK_MASK_LINK_CHAN);
+
+               msm_edp_phy_lane_power_ctrl(ctrl->phy, true, ctrl->lane_cnt);
+
+               msm_edp_phy_vm_pe_init(ctrl->phy);
+
+               /* Make sure phy is programed */
+               wmb();
+               msm_edp_phy_ready(ctrl->phy);
+
+               edp_config_ctrl(ctrl);
+               msm_edp_ctrl_pixel_clock_valid(ctrl, ctrl->pixel_rate, &m, &n);
+               edp_sw_mvid_nvid(ctrl, m, n);
+               edp_mainlink_ctrl(ctrl, 1);
+       } else {
+               edp_mainlink_ctrl(ctrl, 0);
+
+               msm_edp_phy_lane_power_ctrl(ctrl->phy, false, 0);
+               edp_clk_disable(ctrl, EDP_CLK_MASK_LINK_CHAN);
+       }
+}
+
+static int edp_ctrl_training(struct edp_ctrl *ctrl)
+{
+       int ret;
+
+       /* Do link training only when power is on */
+       if (!ctrl->power_on)
+               return -EINVAL;
+
+train_start:
+       ret = edp_do_link_train(ctrl);
+       if (ret == EDP_TRAIN_RECONFIG) {
+               /* Re-configure main link */
+               edp_ctrl_irq_enable(ctrl, 0);
+               edp_ctrl_link_enable(ctrl, 0);
+               msm_edp_phy_ctrl(ctrl->phy, 0);
+
+               /* Make sure link is fully disabled */
+               wmb();
+               usleep_range(500, 1000);
+
+               msm_edp_phy_ctrl(ctrl->phy, 1);
+               edp_ctrl_link_enable(ctrl, 1);
+               edp_ctrl_irq_enable(ctrl, 1);
+               goto train_start;
+       }
+
+       return ret;
+}
+
+static void edp_ctrl_on_worker(struct work_struct *work)
+{
+       struct edp_ctrl *ctrl = container_of(
+                               work, struct edp_ctrl, on_work);
+       int ret;
+
+       mutex_lock(&ctrl->dev_mutex);
+
+       if (ctrl->power_on) {
+               DBG("already on");
+               goto unlock_ret;
+       }
+
+       edp_ctrl_phy_aux_enable(ctrl, 1);
+       edp_ctrl_link_enable(ctrl, 1);
+
+       edp_ctrl_irq_enable(ctrl, 1);
+       ret = drm_dp_link_power_up(ctrl->drm_aux, &ctrl->dp_link);
+       if (ret)
+               goto fail;
+
+       ctrl->power_on = true;
+
+       /* Start link training */
+       ret = edp_ctrl_training(ctrl);
+       if (ret != EDP_TRAIN_SUCCESS)
+               goto fail;
+
+       DBG("DONE");
+       goto unlock_ret;
+
+fail:
+       edp_ctrl_irq_enable(ctrl, 0);
+       edp_ctrl_link_enable(ctrl, 0);
+       edp_ctrl_phy_aux_enable(ctrl, 0);
+       ctrl->power_on = false;
+unlock_ret:
+       mutex_unlock(&ctrl->dev_mutex);
+}
+
+static void edp_ctrl_off_worker(struct work_struct *work)
+{
+       struct edp_ctrl *ctrl = container_of(
+                               work, struct edp_ctrl, off_work);
+       int ret;
+
+       mutex_lock(&ctrl->dev_mutex);
+
+       if (!ctrl->power_on) {
+               DBG("already off");
+               goto unlock_ret;
+       }
+
+       reinit_completion(&ctrl->idle_comp);
+       edp_state_ctrl(ctrl, EDP_STATE_CTRL_PUSH_IDLE);
+
+       ret = wait_for_completion_timeout(&ctrl->idle_comp,
+                                               msecs_to_jiffies(500));
+       if (ret <= 0)
+               DBG("%s: idle pattern timedout, %d\n",
+                               __func__, ret);
+
+       edp_state_ctrl(ctrl, 0);
+
+       drm_dp_link_power_down(ctrl->drm_aux, &ctrl->dp_link);
+
+       edp_ctrl_irq_enable(ctrl, 0);
+
+       edp_ctrl_link_enable(ctrl, 0);
+
+       edp_ctrl_phy_aux_enable(ctrl, 0);
+
+       ctrl->power_on = false;
+
+unlock_ret:
+       mutex_unlock(&ctrl->dev_mutex);
+}
+
+irqreturn_t msm_edp_ctrl_irq(struct edp_ctrl *ctrl)
+{
+       u32 isr1, isr2, mask1, mask2;
+       u32 ack;
+
+       DBG("");
+       spin_lock(&ctrl->irq_lock);
+       isr1 = edp_read(ctrl->base + REG_EDP_INTERRUPT_REG_1);
+       isr2 = edp_read(ctrl->base + REG_EDP_INTERRUPT_REG_2);
+
+       mask1 = isr1 & EDP_INTR_MASK1;
+       mask2 = isr2 & EDP_INTR_MASK2;
+
+       isr1 &= ~mask1; /* remove masks bit */
+       isr2 &= ~mask2;
+
+       DBG("isr=%x mask=%x isr2=%x mask2=%x",
+                       isr1, mask1, isr2, mask2);
+
+       ack = isr1 & EDP_INTR_STATUS1;
+       ack <<= 1;      /* ack bits */
+       ack |= mask1;
+       edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, ack);
+
+       ack = isr2 & EDP_INTR_STATUS2;
+       ack <<= 1;      /* ack bits */
+       ack |= mask2;
+       edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, ack);
+       spin_unlock(&ctrl->irq_lock);
+
+       if (isr1 & EDP_INTERRUPT_REG_1_HPD)
+               DBG("edp_hpd");
+
+       if (isr2 & EDP_INTERRUPT_REG_2_READY_FOR_VIDEO)
+               DBG("edp_video_ready");
+
+       if (isr2 & EDP_INTERRUPT_REG_2_IDLE_PATTERNs_SENT) {
+               DBG("idle_patterns_sent");
+               complete(&ctrl->idle_comp);
+       }
+
+       msm_edp_aux_irq(ctrl->aux, isr1);
+
+       return IRQ_HANDLED;
+}
+
+void msm_edp_ctrl_power(struct edp_ctrl *ctrl, bool on)
+{
+       if (on)
+               queue_work(ctrl->workqueue, &ctrl->on_work);
+       else
+               queue_work(ctrl->workqueue, &ctrl->off_work);
+}
+
+int msm_edp_ctrl_init(struct msm_edp *edp)
+{
+       struct edp_ctrl *ctrl = NULL;
+       struct device *dev = &edp->pdev->dev;
+       int ret;
+
+       if (!edp) {
+               pr_err("%s: edp is NULL!\n", __func__);
+               return -EINVAL;
+       }
+
+       ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+       if (!ctrl)
+               return -ENOMEM;
+
+       edp->ctrl = ctrl;
+       ctrl->pdev = edp->pdev;
+
+       ctrl->base = msm_ioremap(ctrl->pdev, "edp", "eDP");
+       if (IS_ERR(ctrl->base))
+               return PTR_ERR(ctrl->base);
+
+       /* Get regulator, clock, gpio, pwm */
+       ret = edp_regulator_init(ctrl);
+       if (ret) {
+               pr_err("%s:regulator init fail\n", __func__);
+               return ret;
+       }
+       ret = edp_clk_init(ctrl);
+       if (ret) {
+               pr_err("%s:clk init fail\n", __func__);
+               return ret;
+       }
+       ret = edp_gpio_config(ctrl);
+       if (ret) {
+               pr_err("%s:failed to configure GPIOs: %d", __func__, ret);
+               return ret;
+       }
+
+       /* Init aux and phy */
+       ctrl->aux = msm_edp_aux_init(dev, ctrl->base, &ctrl->drm_aux);
+       if (!ctrl->aux || !ctrl->drm_aux) {
+               pr_err("%s:failed to init aux\n", __func__);
+               return -ENOMEM;
+       }
+
+       ctrl->phy = msm_edp_phy_init(dev, ctrl->base);
+       if (!ctrl->phy) {
+               pr_err("%s:failed to init phy\n", __func__);
+               ret = -ENOMEM;
+               goto err_destory_aux;
+       }
+
+       spin_lock_init(&ctrl->irq_lock);
+       mutex_init(&ctrl->dev_mutex);
+       init_completion(&ctrl->idle_comp);
+
+       /* setup workqueue */
+       ctrl->workqueue = alloc_ordered_workqueue("edp_drm_work", 0);
+       INIT_WORK(&ctrl->on_work, edp_ctrl_on_worker);
+       INIT_WORK(&ctrl->off_work, edp_ctrl_off_worker);
+
+       return 0;
+
+err_destory_aux:
+       msm_edp_aux_destroy(dev, ctrl->aux);
+       ctrl->aux = NULL;
+       return ret;
+}
+
+void msm_edp_ctrl_destroy(struct edp_ctrl *ctrl)
+{
+       if (!ctrl)
+               return;
+
+       if (ctrl->workqueue) {
+               flush_workqueue(ctrl->workqueue);
+               destroy_workqueue(ctrl->workqueue);
+               ctrl->workqueue = NULL;
+       }
+
+       if (ctrl->aux) {
+               msm_edp_aux_destroy(&ctrl->pdev->dev, ctrl->aux);
+               ctrl->aux = NULL;
+       }
+
+       kfree(ctrl->edid);
+       ctrl->edid = NULL;
+
+       mutex_destroy(&ctrl->dev_mutex);
+}
+
+bool msm_edp_ctrl_panel_connected(struct edp_ctrl *ctrl)
+{
+       mutex_lock(&ctrl->dev_mutex);
+       DBG("connect status = %d", ctrl->edp_connected);
+       if (ctrl->edp_connected) {
+               mutex_unlock(&ctrl->dev_mutex);
+               return true;
+       }
+
+       if (!ctrl->power_on) {
+               edp_ctrl_phy_aux_enable(ctrl, 1);
+               edp_ctrl_irq_enable(ctrl, 1);
+       }
+
+       if (drm_dp_dpcd_read(ctrl->drm_aux, DP_DPCD_REV, ctrl->dpcd,
+                               DP_RECEIVER_CAP_SIZE) < DP_RECEIVER_CAP_SIZE) {
+               pr_err("%s: AUX channel is NOT ready\n", __func__);
+               memset(ctrl->dpcd, 0, DP_RECEIVER_CAP_SIZE);
+       } else {
+               ctrl->edp_connected = true;
+       }
+
+       if (!ctrl->power_on) {
+               edp_ctrl_irq_enable(ctrl, 0);
+               edp_ctrl_phy_aux_enable(ctrl, 0);
+       }
+
+       DBG("exit: connect status=%d", ctrl->edp_connected);
+
+       mutex_unlock(&ctrl->dev_mutex);
+
+       return ctrl->edp_connected;
+}
+
+int msm_edp_ctrl_get_panel_info(struct edp_ctrl *ctrl,
+               struct drm_connector *connector, struct edid **edid)
+{
+       int ret = 0;
+
+       mutex_lock(&ctrl->dev_mutex);
+
+       if (ctrl->edid) {
+               if (edid) {
+                       DBG("Just return edid buffer");
+                       *edid = ctrl->edid;
+               }
+               goto unlock_ret;
+       }
+
+       if (!ctrl->power_on) {
+               edp_ctrl_phy_aux_enable(ctrl, 1);
+               edp_ctrl_irq_enable(ctrl, 1);
+       }
+
+       ret = drm_dp_link_probe(ctrl->drm_aux, &ctrl->dp_link);
+       if (ret) {
+               pr_err("%s: read dpcd cap failed, %d\n", __func__, ret);
+               goto disable_ret;
+       }
+
+       /* Initialize link rate as panel max link rate */
+       ctrl->link_rate = drm_dp_link_rate_to_bw_code(ctrl->dp_link.rate);
+
+       ctrl->edid = drm_get_edid(connector, &ctrl->drm_aux->ddc);
+       if (!ctrl->edid) {
+               pr_err("%s: edid read fail\n", __func__);
+               goto disable_ret;
+       }
+
+       if (edid)
+               *edid = ctrl->edid;
+
+disable_ret:
+       if (!ctrl->power_on) {
+               edp_ctrl_irq_enable(ctrl, 0);
+               edp_ctrl_phy_aux_enable(ctrl, 0);
+       }
+unlock_ret:
+       mutex_unlock(&ctrl->dev_mutex);
+       return ret;
+}
+
+int msm_edp_ctrl_timing_cfg(struct edp_ctrl *ctrl,
+                               const struct drm_display_mode *mode,
+                               const struct drm_display_info *info)
+{
+       u32 hstart_from_sync, vstart_from_sync;
+       u32 data;
+       int ret = 0;
+
+       mutex_lock(&ctrl->dev_mutex);
+       /*
+        * Need to keep color depth, pixel rate and
+        * interlaced information in ctrl context
+        */
+       ctrl->color_depth = info->bpc;
+       ctrl->pixel_rate = mode->clock;
+       ctrl->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+
+       /* Fill initial link config based on passed in timing */
+       edp_fill_link_cfg(ctrl);
+
+       if (edp_clk_enable(ctrl, EDP_CLK_MASK_AHB)) {
+               pr_err("%s, fail to prepare enable ahb clk\n", __func__);
+               ret = -EINVAL;
+               goto unlock_ret;
+       }
+       edp_clock_synchrous(ctrl, 1);
+
+       /* Configure eDP timing to HW */
+       edp_write(ctrl->base + REG_EDP_TOTAL_HOR_VER,
+               EDP_TOTAL_HOR_VER_HORIZ(mode->htotal) |
+               EDP_TOTAL_HOR_VER_VERT(mode->vtotal));
+
+       vstart_from_sync = mode->vtotal - mode->vsync_start;
+       hstart_from_sync = mode->htotal - mode->hsync_start;
+       edp_write(ctrl->base + REG_EDP_START_HOR_VER_FROM_SYNC,
+               EDP_START_HOR_VER_FROM_SYNC_HORIZ(hstart_from_sync) |
+               EDP_START_HOR_VER_FROM_SYNC_VERT(vstart_from_sync));
+
+       data = EDP_HSYNC_VSYNC_WIDTH_POLARITY_VERT(
+                       mode->vsync_end - mode->vsync_start);
+       data |= EDP_HSYNC_VSYNC_WIDTH_POLARITY_HORIZ(
+                       mode->hsync_end - mode->hsync_start);
+       if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+               data |= EDP_HSYNC_VSYNC_WIDTH_POLARITY_NVSYNC;
+       if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+               data |= EDP_HSYNC_VSYNC_WIDTH_POLARITY_NHSYNC;
+       edp_write(ctrl->base + REG_EDP_HSYNC_VSYNC_WIDTH_POLARITY, data);
+
+       edp_write(ctrl->base + REG_EDP_ACTIVE_HOR_VER,
+               EDP_ACTIVE_HOR_VER_HORIZ(mode->hdisplay) |
+               EDP_ACTIVE_HOR_VER_VERT(mode->vdisplay));
+
+       edp_clk_disable(ctrl, EDP_CLK_MASK_AHB);
+
+unlock_ret:
+       mutex_unlock(&ctrl->dev_mutex);
+       return ret;
+}
+
+bool msm_edp_ctrl_pixel_clock_valid(struct edp_ctrl *ctrl,
+       u32 pixel_rate, u32 *pm, u32 *pn)
+{
+       const struct edp_pixel_clk_div *divs;
+       u32 err = 1; /* 1% error tolerance */
+       u32 clk_err;
+       int i;
+
+       if (ctrl->link_rate == DP_LINK_BW_1_62) {
+               divs = clk_divs[0];
+       } else if (ctrl->link_rate == DP_LINK_BW_2_7) {
+               divs = clk_divs[1];
+       } else {
+               pr_err("%s: Invalid link rate,%d\n", __func__, ctrl->link_rate);
+               return false;
+       }
+
+       for (i = 0; i < EDP_PIXEL_CLK_NUM; i++) {
+               clk_err = abs(divs[i].rate - pixel_rate);
+               if ((divs[i].rate * err / 100) >= clk_err) {
+                       if (pm)
+                               *pm = divs[i].m;
+                       if (pn)
+                               *pn = divs[i].n;
+                       return true;
+               }
+       }
+
+       DBG("pixel clock %d(kHz) not supported", pixel_rate);
+
+       return false;
+}
+