Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / gpu / drm / msm / dsi / dsi_phy.c
diff --git a/kernel/drivers/gpu/drm/msm/dsi/dsi_phy.c b/kernel/drivers/gpu/drm/msm/dsi/dsi_phy.c
new file mode 100644 (file)
index 0000000..f0cea89
--- /dev/null
@@ -0,0 +1,352 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi.h"
+#include "dsi.xml.h"
+
+#define dsi_phy_read(offset) msm_readl((offset))
+#define dsi_phy_write(offset, data) msm_writel((data), (offset))
+
+struct dsi_dphy_timing {
+       u32 clk_pre;
+       u32 clk_post;
+       u32 clk_zero;
+       u32 clk_trail;
+       u32 clk_prepare;
+       u32 hs_exit;
+       u32 hs_zero;
+       u32 hs_prepare;
+       u32 hs_trail;
+       u32 hs_rqst;
+       u32 ta_go;
+       u32 ta_sure;
+       u32 ta_get;
+};
+
+struct msm_dsi_phy {
+       void __iomem *base;
+       void __iomem *reg_base;
+       int id;
+       struct dsi_dphy_timing timing;
+       int (*enable)(struct msm_dsi_phy *phy, bool is_dual_panel,
+               const unsigned long bit_rate, const unsigned long esc_rate);
+       int (*disable)(struct msm_dsi_phy *phy);
+};
+
+#define S_DIV_ROUND_UP(n, d)   \
+       (((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
+
+static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
+                               s32 min_result, bool even)
+{
+       s32 v;
+       v = (tmax - tmin) * percent;
+       v = S_DIV_ROUND_UP(v, 100) + tmin;
+       if (even && (v & 0x1))
+               return max_t(s32, min_result, v - 1);
+       else
+               return max_t(s32, min_result, v);
+}
+
+static void dsi_dphy_timing_calc_clk_zero(struct dsi_dphy_timing *timing,
+                                       s32 ui, s32 coeff, s32 pcnt)
+{
+       s32 tmax, tmin, clk_z;
+       s32 temp;
+
+       /* reset */
+       temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
+       tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+       if (tmin > 255) {
+               tmax = 511;
+               clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
+       } else {
+               tmax = 255;
+               clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
+       }
+
+       /* adjust */
+       temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
+       timing->clk_zero = clk_z + 8 - temp;
+}
+
+static int dsi_dphy_timing_calc(struct dsi_dphy_timing *timing,
+       const unsigned long bit_rate, const unsigned long esc_rate)
+{
+       s32 ui, lpx;
+       s32 tmax, tmin;
+       s32 pcnt0 = 10;
+       s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
+       s32 pcnt2 = 10;
+       s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
+       s32 coeff = 1000; /* Precision, should avoid overflow */
+       s32 temp;
+
+       if (!bit_rate || !esc_rate)
+               return -EINVAL;
+
+       ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+       lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
+
+       tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
+       tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
+       timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
+
+       temp = lpx / ui;
+       if (temp & 0x1)
+               timing->hs_rqst = temp;
+       else
+               timing->hs_rqst = max_t(s32, 0, temp - 2);
+
+       /* Calculate clk_zero after clk_prepare and hs_rqst */
+       dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
+
+       temp = 105 * coeff + 12 * ui - 20 * coeff;
+       tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+       tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
+       timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
+
+       temp = 85 * coeff + 6 * ui;
+       tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+       temp = 40 * coeff + 4 * ui;
+       tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+       timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
+
+       tmax = 255;
+       temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
+       temp = 145 * coeff + 10 * ui - temp;
+       tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+       timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
+
+       temp = 105 * coeff + 12 * ui - 20 * coeff;
+       tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+       temp = 60 * coeff + 4 * ui;
+       tmin = DIV_ROUND_UP(temp, ui) - 2;
+       timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
+
+       tmax = 255;
+       tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
+       timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
+
+       tmax = 63;
+       temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
+       temp = 60 * coeff + 52 * ui - 24 * ui - temp;
+       tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
+       timing->clk_post = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+       tmax = 63;
+       temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
+       temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
+       temp += 8 * ui + lpx;
+       tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
+       if (tmin > tmax) {
+               temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false) >> 1;
+               timing->clk_pre = temp >> 1;
+               temp = (2 * tmax - tmin) * pcnt2;
+       } else {
+               timing->clk_pre = linear_inter(tmax, tmin, pcnt2, 0, false);
+       }
+
+       timing->ta_go = 3;
+       timing->ta_sure = 0;
+       timing->ta_get = 4;
+
+       DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+               timing->clk_pre, timing->clk_post, timing->clk_zero,
+               timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+               timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+               timing->hs_rqst);
+
+       return 0;
+}
+
+static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
+{
+       void __iomem *base = phy->reg_base;
+
+       if (!enable) {
+               dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
+               return;
+       }
+
+       dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x0);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 1);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_5, 0);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_3, 0);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_2, 0x3);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_1, 0x9);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x7);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_4, 0x20);
+}
+
+static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, bool is_dual_panel,
+               const unsigned long bit_rate, const unsigned long esc_rate)
+{
+       struct dsi_dphy_timing *timing = &phy->timing;
+       int i;
+       void __iomem *base = phy->base;
+
+       DBG("");
+
+       if (dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
+               pr_err("%s: D-PHY timing calculation failed\n", __func__);
+               return -EINVAL;
+       }
+
+       dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_0, 0xff);
+
+       dsi_28nm_phy_regulator_ctrl(phy, true);
+
+       dsi_phy_write(base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x00);
+
+       dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_0,
+               DSI_28nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
+       dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_1,
+               DSI_28nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
+       dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_2,
+               DSI_28nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
+       if (timing->clk_zero & BIT(8))
+               dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_3,
+                       DSI_28nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_4,
+               DSI_28nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+       dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_5,
+               DSI_28nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
+       dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_6,
+               DSI_28nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
+       dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_7,
+               DSI_28nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
+       dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_8,
+               DSI_28nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
+       dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_9,
+               DSI_28nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+               DSI_28nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+       dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_10,
+               DSI_28nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
+       dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_11,
+               DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
+
+       dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_1, 0x00);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
+
+       dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_1, 0x6);
+
+       for (i = 0; i < 4; i++) {
+               dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_0(i), 0);
+               dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_1(i), 0);
+               dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_2(i), 0);
+               dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_3(i), 0);
+               dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_DATAPATH(i), 0);
+               dsi_phy_write(base + REG_DSI_28nm_PHY_LN_DEBUG_SEL(i), 0);
+               dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_0(i), 0x1);
+               dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_1(i), 0x97);
+       }
+       dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(0), 0);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(1), 0x5);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(2), 0xa);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(3), 0xf);
+
+       dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_CFG_1, 0xc0);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR0, 0x1);
+       dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR1, 0xbb);
+
+       dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
+
+       if (is_dual_panel && (phy->id != DSI_CLOCK_MASTER))
+               dsi_phy_write(base + REG_DSI_28nm_PHY_GLBL_TEST_CTRL, 0x00);
+       else
+               dsi_phy_write(base + REG_DSI_28nm_PHY_GLBL_TEST_CTRL, 0x01);
+
+       return 0;
+}
+
+static int dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
+{
+       dsi_phy_write(phy->base + REG_DSI_28nm_PHY_CTRL_0, 0);
+       dsi_28nm_phy_regulator_ctrl(phy, false);
+
+       /*
+        * Wait for the registers writes to complete in order to
+        * ensure that the phy is completely disabled
+        */
+       wmb();
+
+       return 0;
+}
+
+#define dsi_phy_func_init(name)        \
+       do {    \
+               phy->enable = dsi_##name##_phy_enable;  \
+               phy->disable = dsi_##name##_phy_disable;        \
+       } while (0)
+
+struct msm_dsi_phy *msm_dsi_phy_init(struct platform_device *pdev,
+                       enum msm_dsi_phy_type type, int id)
+{
+       struct msm_dsi_phy *phy;
+
+       phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+       if (!phy)
+               return NULL;
+
+       phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
+       if (IS_ERR_OR_NULL(phy->base)) {
+               pr_err("%s: failed to map phy base\n", __func__);
+               return NULL;
+       }
+       phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator", "DSI_PHY_REG");
+       if (IS_ERR_OR_NULL(phy->reg_base)) {
+               pr_err("%s: failed to map phy regulator base\n", __func__);
+               return NULL;
+       }
+
+       switch (type) {
+       case MSM_DSI_PHY_28NM:
+               dsi_phy_func_init(28nm);
+               break;
+       default:
+               pr_err("%s: unsupported type, %d\n", __func__, type);
+               return NULL;
+       }
+
+       phy->id = id;
+
+       return phy;
+}
+
+int msm_dsi_phy_enable(struct msm_dsi_phy *phy, bool is_dual_panel,
+       const unsigned long bit_rate, const unsigned long esc_rate)
+{
+       if (!phy || !phy->enable)
+               return -EINVAL;
+       return phy->enable(phy, is_dual_panel, bit_rate, esc_rate);
+}
+
+int msm_dsi_phy_disable(struct msm_dsi_phy *phy)
+{
+       if (!phy || !phy->disable)
+               return -EINVAL;
+       return phy->disable(phy);
+}
+
+void msm_dsi_phy_get_clk_pre_post(struct msm_dsi_phy *phy,
+       u32 *clk_pre, u32 *clk_post)
+{
+       if (!phy)
+               return;
+       if (clk_pre)
+               *clk_pre = phy->timing.clk_pre;
+       if (clk_post)
+               *clk_post = phy->timing.clk_post;
+}
+