#include <drm/drm_rect.h>
#include <linux/dma_remapping.h>
-/* Primary plane formats supported by all gen */
-#define COMMON_PRIMARY_FORMATS \
- DRM_FORMAT_C8, \
- DRM_FORMAT_RGB565, \
- DRM_FORMAT_XRGB8888, \
- DRM_FORMAT_ARGB8888
-
/* Primary plane formats for gen <= 3 */
-static const uint32_t intel_primary_formats_gen2[] = {
- COMMON_PRIMARY_FORMATS,
+static const uint32_t i8xx_primary_formats[] = {
+ DRM_FORMAT_C8,
+ DRM_FORMAT_RGB565,
DRM_FORMAT_XRGB1555,
- DRM_FORMAT_ARGB1555,
+ DRM_FORMAT_XRGB8888,
};
/* Primary plane formats for gen >= 4 */
-static const uint32_t intel_primary_formats_gen4[] = {
- COMMON_PRIMARY_FORMATS, \
+static const uint32_t i965_primary_formats[] = {
+ DRM_FORMAT_C8,
+ DRM_FORMAT_RGB565,
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_XBGR8888,
+ DRM_FORMAT_XRGB2101010,
+ DRM_FORMAT_XBGR2101010,
+};
+
+static const uint32_t skl_primary_formats[] = {
+ DRM_FORMAT_C8,
+ DRM_FORMAT_RGB565,
+ DRM_FORMAT_XRGB8888,
DRM_FORMAT_XBGR8888,
+ DRM_FORMAT_ARGB8888,
DRM_FORMAT_ABGR8888,
DRM_FORMAT_XRGB2101010,
- DRM_FORMAT_ARGB2101010,
DRM_FORMAT_XBGR2101010,
- DRM_FORMAT_ABGR2101010,
+ DRM_FORMAT_YUYV,
+ DRM_FORMAT_YVYU,
+ DRM_FORMAT_UYVY,
+ DRM_FORMAT_VYUY,
};
/* Cursor formats */
static void ironlake_pch_clock_get(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
-static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
- int x, int y, struct drm_framebuffer *old_fb,
- struct drm_atomic_state *state);
static int intel_framebuffer_init(struct drm_device *dev,
struct intel_framebuffer *ifb,
struct drm_mode_fb_cmd2 *mode_cmd,
const struct intel_crtc_state *pipe_config);
static void chv_prepare_pll(struct intel_crtc *crtc,
const struct intel_crtc_state *pipe_config);
-static void intel_begin_crtc_commit(struct drm_crtc *crtc);
-static void intel_finish_crtc_commit(struct drm_crtc *crtc);
-
-static struct intel_encoder *intel_find_encoder(struct intel_connector *connector, int pipe)
-{
- if (!connector->mst_port)
- return connector->encoder;
- else
- return &connector->mst_port->mst_encoders[pipe]->base;
-}
+static void intel_begin_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
+static void intel_finish_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
+static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
+ struct intel_crtc_state *crtc_state);
+static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
+ int num_connectors);
+static void skylake_pfit_enable(struct intel_crtc *crtc);
+static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
+static void ironlake_pfit_enable(struct intel_crtc *crtc);
+static void intel_modeset_setup_hw_state(struct drm_device *dev);
+static void intel_pre_disable_primary(struct drm_crtc *crtc);
typedef struct {
int min, max;
intel_p2_t p2;
};
+/* returns HPLL frequency in kHz */
+static int valleyview_get_vco(struct drm_i915_private *dev_priv)
+{
+ int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
+
+ /* Obtain SKU information */
+ mutex_lock(&dev_priv->sb_lock);
+ hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
+ CCK_FUSE_HPLL_FREQ_MASK;
+ mutex_unlock(&dev_priv->sb_lock);
+
+ return vco_freq[hpll_freq] * 1000;
+}
+
+static int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
+ const char *name, u32 reg)
+{
+ u32 val;
+ int divider;
+
+ if (dev_priv->hpll_freq == 0)
+ dev_priv->hpll_freq = valleyview_get_vco(dev_priv);
+
+ mutex_lock(&dev_priv->sb_lock);
+ val = vlv_cck_read(dev_priv, reg);
+ mutex_unlock(&dev_priv->sb_lock);
+
+ divider = val & CCK_FREQUENCY_VALUES;
+
+ WARN((val & CCK_FREQUENCY_STATUS) !=
+ (divider << CCK_FREQUENCY_STATUS_SHIFT),
+ "%s change in progress\n", name);
+
+ return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, divider + 1);
+}
+
int
intel_pch_rawclk(struct drm_device *dev)
{
return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
}
+/* hrawclock is 1/4 the FSB frequency */
+int intel_hrawclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t clkcfg;
+
+ /* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */
+ if (IS_VALLEYVIEW(dev))
+ return 200;
+
+ clkcfg = I915_READ(CLKCFG);
+ switch (clkcfg & CLKCFG_FSB_MASK) {
+ case CLKCFG_FSB_400:
+ return 100;
+ case CLKCFG_FSB_533:
+ return 133;
+ case CLKCFG_FSB_667:
+ return 166;
+ case CLKCFG_FSB_800:
+ return 200;
+ case CLKCFG_FSB_1067:
+ return 266;
+ case CLKCFG_FSB_1333:
+ return 333;
+ /* these two are just a guess; one of them might be right */
+ case CLKCFG_FSB_1600:
+ case CLKCFG_FSB_1600_ALT:
+ return 400;
+ default:
+ return 133;
+ }
+}
+
+static void intel_update_czclk(struct drm_i915_private *dev_priv)
+{
+ if (!IS_VALLEYVIEW(dev_priv))
+ return;
+
+ dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk",
+ CCK_CZ_CLOCK_CONTROL);
+
+ DRM_DEBUG_DRIVER("CZ clock rate: %d kHz\n", dev_priv->czclk_freq);
+}
+
static inline u32 /* units of 100MHz */
intel_fdi_link_freq(struct drm_device *dev)
{
.p2 = { .p2_slow = 1, .p2_fast = 14 },
};
-static void vlv_clock(int refclk, intel_clock_t *clock)
+static const intel_limit_t intel_limits_bxt = {
+ /* FIXME: find real dot limits */
+ .dot = { .min = 0, .max = INT_MAX },
+ .vco = { .min = 4800000, .max = 6700000 },
+ .n = { .min = 1, .max = 1 },
+ .m1 = { .min = 2, .max = 2 },
+ /* FIXME: find real m2 limits */
+ .m2 = { .min = 2 << 22, .max = 255 << 22 },
+ .p1 = { .min = 2, .max = 4 },
+ .p2 = { .p2_slow = 1, .p2_fast = 20 },
+};
+
+static bool
+needs_modeset(struct drm_crtc_state *state)
{
- clock->m = clock->m1 * clock->m2;
- clock->p = clock->p1 * clock->p2;
- if (WARN_ON(clock->n == 0 || clock->p == 0))
- return;
- clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
- clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+ return drm_atomic_crtc_needs_modeset(state);
}
/**
int type)
{
struct drm_atomic_state *state = crtc_state->base.state;
+ struct drm_connector *connector;
struct drm_connector_state *connector_state;
struct intel_encoder *encoder;
int i, num_connectors = 0;
- for (i = 0; i < state->num_connector; i++) {
- if (!state->connectors[i])
- continue;
-
- connector_state = state->connector_states[i];
+ for_each_connector_in_state(state, connector, connector_state, i) {
if (connector_state->crtc != crtc_state->base.crtc)
continue;
struct drm_device *dev = crtc_state->base.crtc->dev;
const intel_limit_t *limit;
- if (HAS_PCH_SPLIT(dev))
+ if (IS_BROXTON(dev))
+ limit = &intel_limits_bxt;
+ else if (HAS_PCH_SPLIT(dev))
limit = intel_ironlake_limit(crtc_state, refclk);
else if (IS_G4X(dev)) {
limit = intel_g4x_limit(crtc_state);
return limit;
}
+/*
+ * Platform specific helpers to calculate the port PLL loopback- (clock.m),
+ * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
+ * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
+ * The helpers' return value is the rate of the clock that is fed to the
+ * display engine's pipe which can be the above fast dot clock rate or a
+ * divided-down version of it.
+ */
/* m1 is reserved as 0 in Pineview, n is a ring counter */
-static void pineview_clock(int refclk, intel_clock_t *clock)
+static int pnv_calc_dpll_params(int refclk, intel_clock_t *clock)
{
clock->m = clock->m2 + 2;
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n == 0 || clock->p == 0))
- return;
+ return 0;
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+
+ return clock->dot;
}
static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
}
-static void i9xx_clock(int refclk, intel_clock_t *clock)
+static int i9xx_calc_dpll_params(int refclk, intel_clock_t *clock)
{
clock->m = i9xx_dpll_compute_m(clock);
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
- return;
+ return 0;
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+
+ return clock->dot;
}
-static void chv_clock(int refclk, intel_clock_t *clock)
+static int vlv_calc_dpll_params(int refclk, intel_clock_t *clock)
{
clock->m = clock->m1 * clock->m2;
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n == 0 || clock->p == 0))
- return;
+ return 0;
+ clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
+ clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+
+ return clock->dot / 5;
+}
+
+int chv_calc_dpll_params(int refclk, intel_clock_t *clock)
+{
+ clock->m = clock->m1 * clock->m2;
+ clock->p = clock->p1 * clock->p2;
+ if (WARN_ON(clock->n == 0 || clock->p == 0))
+ return 0;
clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m,
clock->n << 22);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+
+ return clock->dot / 5;
}
#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
INTELPllInvalid("m1 out of range\n");
- if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev))
+ if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev) && !IS_BROXTON(dev))
if (clock->m1 <= clock->m2)
INTELPllInvalid("m1 <= m2\n");
- if (!IS_VALLEYVIEW(dev)) {
+ if (!IS_VALLEYVIEW(dev) && !IS_BROXTON(dev)) {
if (clock->p < limit->p.min || limit->p.max < clock->p)
INTELPllInvalid("p out of range\n");
if (clock->m < limit->m.min || limit->m.max < clock->m)
return true;
}
-static bool
-i9xx_find_best_dpll(const intel_limit_t *limit,
- struct intel_crtc_state *crtc_state,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
+static int
+i9xx_select_p2_div(const intel_limit_t *limit,
+ const struct intel_crtc_state *crtc_state,
+ int target)
{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
- struct drm_device *dev = crtc->base.dev;
- intel_clock_t clock;
- int err = target;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
/*
* single/dual channel state, if we even can.
*/
if (intel_is_dual_link_lvds(dev))
- clock.p2 = limit->p2.p2_fast;
+ return limit->p2.p2_fast;
else
- clock.p2 = limit->p2.p2_slow;
+ return limit->p2.p2_slow;
} else {
if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
+ return limit->p2.p2_slow;
else
- clock.p2 = limit->p2.p2_fast;
+ return limit->p2.p2_fast;
}
+}
+
+static bool
+i9xx_find_best_dpll(const intel_limit_t *limit,
+ struct intel_crtc_state *crtc_state,
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc_state->base.crtc->dev;
+ intel_clock_t clock;
+ int err = target;
memset(best_clock, 0, sizeof(*best_clock));
+ clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
+
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
clock.m1++) {
for (clock.m2 = limit->m2.min;
clock.p1 <= limit->p1.max; clock.p1++) {
int this_err;
- i9xx_clock(refclk, &clock);
+ i9xx_calc_dpll_params(refclk, &clock);
if (!intel_PLL_is_valid(dev, limit,
&clock))
continue;
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
- struct drm_device *dev = crtc->base.dev;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
intel_clock_t clock;
int err = target;
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
- /*
- * For LVDS just rely on its current settings for dual-channel.
- * We haven't figured out how to reliably set up different
- * single/dual channel state, if we even can.
- */
- if (intel_is_dual_link_lvds(dev))
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
-
memset(best_clock, 0, sizeof(*best_clock));
+ clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
+
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
clock.m1++) {
for (clock.m2 = limit->m2.min;
clock.p1 <= limit->p1.max; clock.p1++) {
int this_err;
- pineview_clock(refclk, &clock);
+ pnv_calc_dpll_params(refclk, &clock);
if (!intel_PLL_is_valid(dev, limit,
&clock))
continue;
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
- struct drm_device *dev = crtc->base.dev;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
intel_clock_t clock;
int max_n;
- bool found;
+ bool found = false;
/* approximately equals target * 0.00585 */
int err_most = (target >> 8) + (target >> 9);
- found = false;
-
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
- if (intel_is_dual_link_lvds(dev))
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
memset(best_clock, 0, sizeof(*best_clock));
+
+ clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
+
max_n = limit->n.max;
/* based on hardware requirement, prefer smaller n to precision */
for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
clock.p1 >= limit->p1.min; clock.p1--) {
int this_err;
- i9xx_clock(refclk, &clock);
+ i9xx_calc_dpll_params(refclk, &clock);
if (!intel_PLL_is_valid(dev, limit,
&clock))
continue;
clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
refclk * clock.m1);
- vlv_clock(refclk, &clock);
+ vlv_calc_dpll_params(refclk, &clock);
if (!intel_PLL_is_valid(dev, limit,
&clock))
clock.m2 = m2;
- chv_clock(refclk, &clock);
+ chv_calc_dpll_params(refclk, &clock);
if (!intel_PLL_is_valid(dev, limit, &clock))
continue;
return found;
}
+bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, int target_clock,
+ intel_clock_t *best_clock)
+{
+ int refclk = i9xx_get_refclk(crtc_state, 0);
+
+ return chv_find_best_dpll(intel_limit(crtc_state, refclk), crtc_state,
+ target_clock, refclk, NULL, best_clock);
+}
+
bool intel_crtc_active(struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
line_mask = DSL_LINEMASK_GEN3;
line1 = I915_READ(reg) & line_mask;
- mdelay(5);
+ msleep(5);
line2 = I915_READ(reg) & line_mask;
return line1 == line2;
}
}
-/*
- * ibx_digital_port_connected - is the specified port connected?
- * @dev_priv: i915 private structure
- * @port: the port to test
- *
- * Returns true if @port is connected, false otherwise.
- */
-bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
- struct intel_digital_port *port)
-{
- u32 bit;
-
- if (HAS_PCH_IBX(dev_priv->dev)) {
- switch (port->port) {
- case PORT_B:
- bit = SDE_PORTB_HOTPLUG;
- break;
- case PORT_C:
- bit = SDE_PORTC_HOTPLUG;
- break;
- case PORT_D:
- bit = SDE_PORTD_HOTPLUG;
- break;
- default:
- return true;
- }
- } else {
- switch (port->port) {
- case PORT_B:
- bit = SDE_PORTB_HOTPLUG_CPT;
- break;
- case PORT_C:
- bit = SDE_PORTC_HOTPLUG_CPT;
- break;
- case PORT_D:
- bit = SDE_PORTD_HOTPLUG_CPT;
- break;
- default:
- return true;
- }
- }
-
- return I915_READ(SDEISR) & bit;
-}
-
static const char *state_string(bool enabled)
{
return enabled ? "on" : "off";
void assert_pll(struct drm_i915_private *dev_priv,
enum pipe pipe, bool state)
{
- int reg;
u32 val;
bool cur_state;
- reg = DPLL(pipe);
- val = I915_READ(reg);
+ val = I915_READ(DPLL(pipe));
cur_state = !!(val & DPLL_VCO_ENABLE);
I915_STATE_WARN(cur_state != state,
"PLL state assertion failure (expected %s, current %s)\n",
u32 val;
bool cur_state;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
cur_state = val & DSI_PLL_VCO_EN;
I915_STATE_WARN(cur_state != state,
static void assert_fdi_tx(struct drm_i915_private *dev_priv,
enum pipe pipe, bool state)
{
- int reg;
- u32 val;
bool cur_state;
enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
pipe);
if (HAS_DDI(dev_priv->dev)) {
/* DDI does not have a specific FDI_TX register */
- reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
- val = I915_READ(reg);
+ u32 val = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
} else {
- reg = FDI_TX_CTL(pipe);
- val = I915_READ(reg);
+ u32 val = I915_READ(FDI_TX_CTL(pipe));
cur_state = !!(val & FDI_TX_ENABLE);
}
I915_STATE_WARN(cur_state != state,
static void assert_fdi_rx(struct drm_i915_private *dev_priv,
enum pipe pipe, bool state)
{
- int reg;
u32 val;
bool cur_state;
- reg = FDI_RX_CTL(pipe);
- val = I915_READ(reg);
+ val = I915_READ(FDI_RX_CTL(pipe));
cur_state = !!(val & FDI_RX_ENABLE);
I915_STATE_WARN(cur_state != state,
"FDI RX state assertion failure (expected %s, current %s)\n",
static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
- int reg;
u32 val;
/* ILK FDI PLL is always enabled */
if (HAS_DDI(dev_priv->dev))
return;
- reg = FDI_TX_CTL(pipe);
- val = I915_READ(reg);
+ val = I915_READ(FDI_TX_CTL(pipe));
I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
}
void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
enum pipe pipe, bool state)
{
- int reg;
u32 val;
bool cur_state;
- reg = FDI_RX_CTL(pipe);
- val = I915_READ(reg);
+ val = I915_READ(FDI_RX_CTL(pipe));
cur_state = !!(val & FDI_RX_PLL_ENABLE);
I915_STATE_WARN(cur_state != state,
"FDI RX PLL assertion failure (expected %s, current %s)\n",
bool cur_state;
if (IS_845G(dev) || IS_I865G(dev))
- cur_state = I915_READ(_CURACNTR) & CURSOR_ENABLE;
+ cur_state = I915_READ(CURCNTR(PIPE_A)) & CURSOR_ENABLE;
else
cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
void assert_pipe(struct drm_i915_private *dev_priv,
enum pipe pipe, bool state)
{
- int reg;
- u32 val;
bool cur_state;
enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
pipe);
POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
cur_state = false;
} else {
- reg = PIPECONF(cpu_transcoder);
- val = I915_READ(reg);
+ u32 val = I915_READ(PIPECONF(cpu_transcoder));
cur_state = !!(val & PIPECONF_ENABLE);
}
static void assert_plane(struct drm_i915_private *dev_priv,
enum plane plane, bool state)
{
- int reg;
u32 val;
bool cur_state;
- reg = DSPCNTR(plane);
- val = I915_READ(reg);
+ val = I915_READ(DSPCNTR(plane));
cur_state = !!(val & DISPLAY_PLANE_ENABLE);
I915_STATE_WARN(cur_state != state,
"plane %c assertion failure (expected %s, current %s)\n",
enum pipe pipe)
{
struct drm_device *dev = dev_priv->dev;
- int reg, i;
- u32 val;
- int cur_pipe;
+ int i;
/* Primary planes are fixed to pipes on gen4+ */
if (INTEL_INFO(dev)->gen >= 4) {
- reg = DSPCNTR(pipe);
- val = I915_READ(reg);
+ u32 val = I915_READ(DSPCNTR(pipe));
I915_STATE_WARN(val & DISPLAY_PLANE_ENABLE,
"plane %c assertion failure, should be disabled but not\n",
plane_name(pipe));
/* Need to check both planes against the pipe */
for_each_pipe(dev_priv, i) {
- reg = DSPCNTR(i);
- val = I915_READ(reg);
- cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
+ u32 val = I915_READ(DSPCNTR(i));
+ enum pipe cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
DISPPLANE_SEL_PIPE_SHIFT;
I915_STATE_WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
"plane %c assertion failure, should be off on pipe %c but is still active\n",
enum pipe pipe)
{
struct drm_device *dev = dev_priv->dev;
- int reg, sprite;
- u32 val;
+ int sprite;
if (INTEL_INFO(dev)->gen >= 9) {
for_each_sprite(dev_priv, pipe, sprite) {
- val = I915_READ(PLANE_CTL(pipe, sprite));
+ u32 val = I915_READ(PLANE_CTL(pipe, sprite));
I915_STATE_WARN(val & PLANE_CTL_ENABLE,
"plane %d assertion failure, should be off on pipe %c but is still active\n",
sprite, pipe_name(pipe));
}
} else if (IS_VALLEYVIEW(dev)) {
for_each_sprite(dev_priv, pipe, sprite) {
- reg = SPCNTR(pipe, sprite);
- val = I915_READ(reg);
+ u32 val = I915_READ(SPCNTR(pipe, sprite));
I915_STATE_WARN(val & SP_ENABLE,
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
sprite_name(pipe, sprite), pipe_name(pipe));
}
} else if (INTEL_INFO(dev)->gen >= 7) {
- reg = SPRCTL(pipe);
- val = I915_READ(reg);
+ u32 val = I915_READ(SPRCTL(pipe));
I915_STATE_WARN(val & SPRITE_ENABLE,
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
plane_name(pipe), pipe_name(pipe));
} else if (INTEL_INFO(dev)->gen >= 5) {
- reg = DVSCNTR(pipe);
- val = I915_READ(reg);
+ u32 val = I915_READ(DVSCNTR(pipe));
I915_STATE_WARN(val & DVS_ENABLE,
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
plane_name(pipe), pipe_name(pipe));
static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
- int reg;
u32 val;
bool enabled;
- reg = PCH_TRANSCONF(pipe);
- val = I915_READ(reg);
+ val = I915_READ(PCH_TRANSCONF(pipe));
enabled = !!(val & TRANS_ENABLE);
I915_STATE_WARN(enabled,
"transcoder assertion failed, should be off on pipe %c but is still active\n",
static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
- int reg;
u32 val;
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
- reg = PCH_ADPA;
- val = I915_READ(reg);
+ val = I915_READ(PCH_ADPA);
I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
"PCH VGA enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
- reg = PCH_LVDS;
- val = I915_READ(reg);
+ val = I915_READ(PCH_LVDS);
I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
"PCH LVDS enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
}
-static void intel_init_dpio(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (!IS_VALLEYVIEW(dev))
- return;
-
- /*
- * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
- * CHV x1 PHY (DP/HDMI D)
- * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
- */
- if (IS_CHERRYVIEW(dev)) {
- DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
- DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
- } else {
- DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
- }
-}
-
static void vlv_enable_pll(struct intel_crtc *crtc,
const struct intel_crtc_state *pipe_config)
{
BUG_ON(!IS_CHERRYVIEW(dev_priv->dev));
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
/* Enable back the 10bit clock to display controller */
tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
tmp |= DPIO_DCLKP_EN;
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
+ mutex_unlock(&dev_priv->sb_lock);
+
/*
* Need to wait > 100ns between dclkp clock enable bit and PLL enable.
*/
/* not sure when this should be written */
I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
POSTING_READ(DPLL_MD(pipe));
-
- mutex_unlock(&dev_priv->dpio_lock);
}
static int intel_num_dvo_pipes(struct drm_device *dev)
int count = 0;
for_each_intel_crtc(dev, crtc)
- count += crtc->active &&
+ count += crtc->base.state->active &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
return count;
I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
}
+ /*
+ * Apparently we need to have VGA mode enabled prior to changing
+ * the P1/P2 dividers. Otherwise the DPLL will keep using the old
+ * dividers, even though the register value does change.
+ */
+ I915_WRITE(reg, 0);
+
+ I915_WRITE(reg, dpll);
+
/* Wait for the clocks to stabilize. */
POSTING_READ(reg);
udelay(150);
/* Disable DVO 2x clock on both PLLs if necessary */
if (IS_I830(dev) &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
- intel_num_dvo_pipes(dev) == 1) {
+ !intel_num_dvo_pipes(dev)) {
I915_WRITE(DPLL(PIPE_B),
I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
I915_WRITE(DPLL(PIPE_A),
/* Make sure the pipe isn't still relying on us */
assert_pipe_disabled(dev_priv, pipe);
- I915_WRITE(DPLL(pipe), 0);
+ I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS);
POSTING_READ(DPLL(pipe));
}
static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
{
- u32 val = 0;
+ u32 val;
/* Make sure the pipe isn't still relying on us */
assert_pipe_disabled(dev_priv, pipe);
* Leave integrated clock source and reference clock enabled for pipe B.
* The latter is needed for VGA hotplug / manual detection.
*/
+ val = DPLL_VGA_MODE_DIS;
if (pipe == PIPE_B)
- val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV;
+ val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REF_CLK_ENABLE_VLV;
I915_WRITE(DPLL(pipe), val);
POSTING_READ(DPLL(pipe));
assert_pipe_disabled(dev_priv, pipe);
/* Set PLL en = 0 */
- val = DPLL_SSC_REF_CLOCK_CHV | DPLL_REFA_CLK_ENABLE_VLV;
+ val = DPLL_SSC_REF_CLK_CHV |
+ DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
if (pipe != PIPE_A)
val |= DPLL_INTEGRATED_CRI_CLK_VLV;
I915_WRITE(DPLL(pipe), val);
POSTING_READ(DPLL(pipe));
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
/* Disable 10bit clock to display controller */
val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
val &= ~DPIO_DCLKP_EN;
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
- /* disable left/right clock distribution */
- if (pipe != PIPE_B) {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
- val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
- } else {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
- val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
- }
-
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
}
void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
- struct intel_digital_port *dport)
+ struct intel_digital_port *dport,
+ unsigned int expected_mask)
{
u32 port_mask;
int dpll_reg;
case PORT_C:
port_mask = DPLL_PORTC_READY_MASK;
dpll_reg = DPLL(0);
+ expected_mask <<= 4;
break;
case PORT_D:
port_mask = DPLL_PORTD_READY_MASK;
BUG();
}
- if (wait_for((I915_READ(dpll_reg) & port_mask) == 0, 1000))
- WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
- port_name(dport->port), I915_READ(dpll_reg));
+ if (wait_for((I915_READ(dpll_reg) & port_mask) == expected_mask, 1000))
+ WARN(1, "timed out waiting for port %c ready: got 0x%x, expected 0x%x\n",
+ port_name(dport->port), I915_READ(dpll_reg) & port_mask, expected_mask);
}
static void intel_prepare_shared_dpll(struct intel_crtc *crtc)
struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
/* PCH only available on ILK+ */
- BUG_ON(INTEL_INFO(dev)->gen < 5);
- if (WARN_ON(pll == NULL))
- return;
+ if (INTEL_INFO(dev)->gen < 5)
+ return;
- if (WARN_ON(pll->config.crtc_mask == 0))
+ if (pll == NULL)
+ return;
+
+ if (WARN_ON(!(pll->config.crtc_mask & (1 << drm_crtc_index(&crtc->base)))))
return;
DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n",
if (HAS_PCH_IBX(dev_priv->dev)) {
/*
- * make the BPC in transcoder be consistent with
- * that in pipeconf reg.
+ * Make the BPC in transcoder be consistent with
+ * that in pipeconf reg. For HDMI we must use 8bpc
+ * here for both 8bpc and 12bpc.
*/
val &= ~PIPECONF_BPC_MASK;
- val |= pipeconf_val & PIPECONF_BPC_MASK;
+ if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_HDMI))
+ val |= PIPECONF_8BPC;
+ else
+ val |= pipeconf_val & PIPECONF_BPC_MASK;
}
val &= ~TRANS_INTERLACE_MASK;
assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
/* Workaround: set timing override bit. */
- val = I915_READ(_TRANSA_CHICKEN2);
+ val = I915_READ(TRANS_CHICKEN2(PIPE_A));
val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
- I915_WRITE(_TRANSA_CHICKEN2, val);
+ I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
val = TRANS_ENABLE;
pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
DRM_ERROR("Failed to disable PCH transcoder\n");
/* Workaround: clear timing override bit. */
- val = I915_READ(_TRANSA_CHICKEN2);
+ val = I915_READ(TRANS_CHICKEN2(PIPE_A));
val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
- I915_WRITE(_TRANSA_CHICKEN2, val);
+ I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
}
/**
int reg;
u32 val;
+ DRM_DEBUG_KMS("enabling pipe %c\n", pipe_name(pipe));
+
assert_planes_disabled(dev_priv, pipe);
assert_cursor_disabled(dev_priv, pipe);
assert_sprites_disabled(dev_priv, pipe);
* a plane. On ILK+ the pipe PLLs are integrated, so we don't
* need the check.
*/
- if (!HAS_PCH_SPLIT(dev_priv->dev))
+ if (HAS_GMCH_DISPLAY(dev_priv->dev))
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
assert_dsi_pll_enabled(dev_priv);
else
int reg;
u32 val;
+ DRM_DEBUG_KMS("disabling pipe %c\n", pipe_name(pipe));
+
/*
* Make sure planes won't keep trying to pump pixels to us,
* or we might hang the display.
intel_wait_for_pipe_off(crtc);
}
-/*
- * Plane regs are double buffered, going from enabled->disabled needs a
- * trigger in order to latch. The display address reg provides this.
- */
-void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
- enum plane plane)
+static bool need_vtd_wa(struct drm_device *dev)
{
- struct drm_device *dev = dev_priv->dev;
- u32 reg = INTEL_INFO(dev)->gen >= 4 ? DSPSURF(plane) : DSPADDR(plane);
-
- I915_WRITE(reg, I915_READ(reg));
- POSTING_READ(reg);
+#ifdef CONFIG_INTEL_IOMMU
+ if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
+ return true;
+#endif
+ return false;
}
-/**
- * intel_enable_primary_hw_plane - enable the primary plane on a given pipe
- * @plane: plane to be enabled
- * @crtc: crtc for the plane
- *
- * Enable @plane on @crtc, making sure that the pipe is running first.
- */
-static void intel_enable_primary_hw_plane(struct drm_plane *plane,
- struct drm_crtc *crtc)
-{
- struct drm_device *dev = plane->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
- /* If the pipe isn't enabled, we can't pump pixels and may hang */
- assert_pipe_enabled(dev_priv, intel_crtc->pipe);
-
- if (intel_crtc->primary_enabled)
- return;
-
- intel_crtc->primary_enabled = true;
-
- dev_priv->display.update_primary_plane(crtc, plane->fb,
- crtc->x, crtc->y);
-
- /*
- * BDW signals flip done immediately if the plane
- * is disabled, even if the plane enable is already
- * armed to occur at the next vblank :(
- */
- if (IS_BROADWELL(dev))
- intel_wait_for_vblank(dev, intel_crtc->pipe);
-}
-
-/**
- * intel_disable_primary_hw_plane - disable the primary hardware plane
- * @plane: plane to be disabled
- * @crtc: crtc for the plane
- *
- * Disable @plane on @crtc, making sure that the pipe is running first.
- */
-static void intel_disable_primary_hw_plane(struct drm_plane *plane,
- struct drm_crtc *crtc)
-{
- struct drm_device *dev = plane->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
- if (WARN_ON(!intel_crtc->active))
- return;
-
- if (!intel_crtc->primary_enabled)
- return;
-
- intel_crtc->primary_enabled = false;
-
- dev_priv->display.update_primary_plane(crtc, plane->fb,
- crtc->x, crtc->y);
-}
-
-static bool need_vtd_wa(struct drm_device *dev)
-{
-#ifdef CONFIG_INTEL_IOMMU
- if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
- return true;
-#endif
- return false;
-}
-
-unsigned int
-intel_tile_height(struct drm_device *dev, uint32_t pixel_format,
- uint64_t fb_format_modifier)
+unsigned int
+intel_tile_height(struct drm_device *dev, uint32_t pixel_format,
+ uint64_t fb_format_modifier, unsigned int plane)
{
unsigned int tile_height;
uint32_t pixel_bytes;
tile_height = 32;
break;
case I915_FORMAT_MOD_Yf_TILED:
- pixel_bytes = drm_format_plane_cpp(pixel_format, 0);
+ pixel_bytes = drm_format_plane_cpp(pixel_format, plane);
switch (pixel_bytes) {
default:
case 1:
uint32_t pixel_format, uint64_t fb_format_modifier)
{
return ALIGN(height, intel_tile_height(dev, pixel_format,
- fb_format_modifier));
+ fb_format_modifier, 0));
}
static int
const struct drm_plane_state *plane_state)
{
struct intel_rotation_info *info = &view->rotation_info;
+ unsigned int tile_height, tile_pitch;
*view = i915_ggtt_view_normal;
info->height = fb->height;
info->pixel_format = fb->pixel_format;
info->pitch = fb->pitches[0];
+ info->uv_offset = fb->offsets[1];
info->fb_modifier = fb->modifier[0];
- if (!(info->fb_modifier == I915_FORMAT_MOD_Y_TILED ||
- info->fb_modifier == I915_FORMAT_MOD_Yf_TILED)) {
- DRM_DEBUG_KMS(
- "Y or Yf tiling is needed for 90/270 rotation!\n");
- return -EINVAL;
+ tile_height = intel_tile_height(fb->dev, fb->pixel_format,
+ fb->modifier[0], 0);
+ tile_pitch = PAGE_SIZE / tile_height;
+ info->width_pages = DIV_ROUND_UP(fb->pitches[0], tile_pitch);
+ info->height_pages = DIV_ROUND_UP(fb->height, tile_height);
+ info->size = info->width_pages * info->height_pages * PAGE_SIZE;
+
+ if (info->pixel_format == DRM_FORMAT_NV12) {
+ tile_height = intel_tile_height(fb->dev, fb->pixel_format,
+ fb->modifier[0], 1);
+ tile_pitch = PAGE_SIZE / tile_height;
+ info->width_pages_uv = DIV_ROUND_UP(fb->pitches[0], tile_pitch);
+ info->height_pages_uv = DIV_ROUND_UP(fb->height / 2,
+ tile_height);
+ info->size_uv = info->width_pages_uv * info->height_pages_uv *
+ PAGE_SIZE;
}
return 0;
}
+static unsigned int intel_linear_alignment(struct drm_i915_private *dev_priv)
+{
+ if (INTEL_INFO(dev_priv)->gen >= 9)
+ return 256 * 1024;
+ else if (IS_BROADWATER(dev_priv) || IS_CRESTLINE(dev_priv) ||
+ IS_VALLEYVIEW(dev_priv))
+ return 128 * 1024;
+ else if (INTEL_INFO(dev_priv)->gen >= 4)
+ return 4 * 1024;
+ else
+ return 0;
+}
+
int
intel_pin_and_fence_fb_obj(struct drm_plane *plane,
struct drm_framebuffer *fb,
const struct drm_plane_state *plane_state,
- struct intel_engine_cs *pipelined)
+ struct intel_engine_cs *pipelined,
+ struct drm_i915_gem_request **pipelined_request)
{
struct drm_device *dev = fb->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
switch (fb->modifier[0]) {
case DRM_FORMAT_MOD_NONE:
- if (INTEL_INFO(dev)->gen >= 9)
- alignment = 256 * 1024;
- else if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
- alignment = 128 * 1024;
- else if (INTEL_INFO(dev)->gen >= 4)
- alignment = 4 * 1024;
- else
- alignment = 64 * 1024;
+ alignment = intel_linear_alignment(dev_priv);
break;
case I915_FORMAT_MOD_X_TILED:
if (INTEL_INFO(dev)->gen >= 9)
dev_priv->mm.interruptible = false;
ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined,
- &view);
+ pipelined_request, &view);
if (ret)
goto err_interruptible;
* framebuffer compression. For simplicity, we always install
* a fence as the cost is not that onerous.
*/
- ret = i915_gem_object_get_fence(obj);
- if (ret)
- goto err_unpin;
+ if (view.type == I915_GGTT_VIEW_NORMAL) {
+ ret = i915_gem_object_get_fence(obj);
+ if (ret == -EDEADLK) {
+ /*
+ * -EDEADLK means there are no free fences
+ * no pending flips.
+ *
+ * This is propagated to atomic, but it uses
+ * -EDEADLK to force a locking recovery, so
+ * change the returned error to -EBUSY.
+ */
+ ret = -EBUSY;
+ goto err_unpin;
+ } else if (ret)
+ goto err_unpin;
- i915_gem_object_pin_fence(obj);
+ i915_gem_object_pin_fence(obj);
+ }
dev_priv->mm.interruptible = true;
intel_runtime_pm_put(dev_priv);
ret = intel_fill_fb_ggtt_view(&view, fb, plane_state);
WARN_ONCE(ret, "Couldn't get view from plane state!");
- i915_gem_object_unpin_fence(obj);
+ if (view.type == I915_GGTT_VIEW_NORMAL)
+ i915_gem_object_unpin_fence(obj);
+
i915_gem_object_unpin_from_display_plane(obj, &view);
}
/* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
* is assumed to be a power-of-two. */
-unsigned long intel_gen4_compute_page_offset(int *x, int *y,
+unsigned long intel_gen4_compute_page_offset(struct drm_i915_private *dev_priv,
+ int *x, int *y,
unsigned int tiling_mode,
unsigned int cpp,
unsigned int pitch)
return tile_rows * pitch * 8 + tiles * 4096;
} else {
+ unsigned int alignment = intel_linear_alignment(dev_priv) - 1;
unsigned int offset;
offset = *y * pitch + *x * cpp;
- *y = 0;
- *x = (offset & 4095) / cpp;
- return offset & -4096;
+ *y = (offset & alignment) / pitch;
+ *x = ((offset & alignment) - *y * pitch) / cpp;
+ return offset & ~alignment;
}
}
struct intel_initial_plane_config *plane_config)
{
struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_i915_gem_object *obj = NULL;
struct drm_mode_fb_cmd2 mode_cmd = { 0 };
struct drm_framebuffer *fb = &plane_config->fb->base;
if (plane_config->size == 0)
return false;
+ /* If the FB is too big, just don't use it since fbdev is not very
+ * important and we should probably use that space with FBC or other
+ * features. */
+ if (size_aligned * 2 > dev_priv->gtt.stolen_usable_size)
+ return false;
+
obj = i915_gem_object_create_stolen_for_preallocated(dev,
base_aligned,
base_aligned,
struct intel_crtc *i;
struct drm_i915_gem_object *obj;
struct drm_plane *primary = intel_crtc->base.primary;
+ struct drm_plane_state *plane_state = primary->state;
+ struct drm_crtc_state *crtc_state = intel_crtc->base.state;
+ struct intel_plane *intel_plane = to_intel_plane(primary);
struct drm_framebuffer *fb;
if (!plane_config->fb)
}
}
+ /*
+ * We've failed to reconstruct the BIOS FB. Current display state
+ * indicates that the primary plane is visible, but has a NULL FB,
+ * which will lead to problems later if we don't fix it up. The
+ * simplest solution is to just disable the primary plane now and
+ * pretend the BIOS never had it enabled.
+ */
+ to_intel_plane_state(plane_state)->visible = false;
+ crtc_state->plane_mask &= ~(1 << drm_plane_index(primary));
+ intel_pre_disable_primary(&intel_crtc->base);
+ intel_plane->disable_plane(primary, &intel_crtc->base);
+
return;
valid_fb:
+ plane_state->src_x = 0;
+ plane_state->src_y = 0;
+ plane_state->src_w = fb->width << 16;
+ plane_state->src_h = fb->height << 16;
+
+ plane_state->crtc_x = 0;
+ plane_state->crtc_y = 0;
+ plane_state->crtc_w = fb->width;
+ plane_state->crtc_h = fb->height;
+
obj = intel_fb_obj(fb);
if (obj->tiling_mode != I915_TILING_NONE)
dev_priv->preserve_bios_swizzle = true;
- primary->fb = fb;
- primary->state->crtc = &intel_crtc->base;
- primary->crtc = &intel_crtc->base;
- update_state_fb(primary);
- obj->frontbuffer_bits |= INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
+ drm_framebuffer_reference(fb);
+ primary->fb = primary->state->fb = fb;
+ primary->crtc = primary->state->crtc = &intel_crtc->base;
+ intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
+ obj->frontbuffer_bits |= to_intel_plane(primary)->frontbuffer_bit;
}
static void i9xx_update_primary_plane(struct drm_crtc *crtc,
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_plane *primary = crtc->primary;
+ bool visible = to_intel_plane_state(primary->state)->visible;
struct drm_i915_gem_object *obj;
int plane = intel_crtc->plane;
unsigned long linear_offset;
u32 reg = DSPCNTR(plane);
int pixel_size;
- if (!intel_crtc->primary_enabled) {
+ if (!visible || !fb) {
I915_WRITE(reg, 0);
if (INTEL_INFO(dev)->gen >= 4)
I915_WRITE(DSPSURF(plane), 0);
dspcntr |= DISPPLANE_8BPP;
break;
case DRM_FORMAT_XRGB1555:
- case DRM_FORMAT_ARGB1555:
dspcntr |= DISPPLANE_BGRX555;
break;
case DRM_FORMAT_RGB565:
dspcntr |= DISPPLANE_BGRX565;
break;
case DRM_FORMAT_XRGB8888:
- case DRM_FORMAT_ARGB8888:
dspcntr |= DISPPLANE_BGRX888;
break;
case DRM_FORMAT_XBGR8888:
- case DRM_FORMAT_ABGR8888:
dspcntr |= DISPPLANE_RGBX888;
break;
case DRM_FORMAT_XRGB2101010:
- case DRM_FORMAT_ARGB2101010:
dspcntr |= DISPPLANE_BGRX101010;
break;
case DRM_FORMAT_XBGR2101010:
- case DRM_FORMAT_ABGR2101010:
dspcntr |= DISPPLANE_RGBX101010;
break;
default:
if (INTEL_INFO(dev)->gen >= 4) {
intel_crtc->dspaddr_offset =
- intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
+ intel_gen4_compute_page_offset(dev_priv,
+ &x, &y, obj->tiling_mode,
pixel_size,
fb->pitches[0]);
linear_offset -= intel_crtc->dspaddr_offset;
(intel_crtc->config->pipe_src_w - 1) * pixel_size;
}
+ intel_crtc->adjusted_x = x;
+ intel_crtc->adjusted_y = y;
+
I915_WRITE(reg, dspcntr);
I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_plane *primary = crtc->primary;
+ bool visible = to_intel_plane_state(primary->state)->visible;
struct drm_i915_gem_object *obj;
int plane = intel_crtc->plane;
unsigned long linear_offset;
u32 reg = DSPCNTR(plane);
int pixel_size;
- if (!intel_crtc->primary_enabled) {
+ if (!visible || !fb) {
I915_WRITE(reg, 0);
I915_WRITE(DSPSURF(plane), 0);
POSTING_READ(reg);
dspcntr |= DISPPLANE_BGRX565;
break;
case DRM_FORMAT_XRGB8888:
- case DRM_FORMAT_ARGB8888:
dspcntr |= DISPPLANE_BGRX888;
break;
case DRM_FORMAT_XBGR8888:
- case DRM_FORMAT_ABGR8888:
dspcntr |= DISPPLANE_RGBX888;
break;
case DRM_FORMAT_XRGB2101010:
- case DRM_FORMAT_ARGB2101010:
dspcntr |= DISPPLANE_BGRX101010;
break;
case DRM_FORMAT_XBGR2101010:
- case DRM_FORMAT_ABGR2101010:
dspcntr |= DISPPLANE_RGBX101010;
break;
default:
linear_offset = y * fb->pitches[0] + x * pixel_size;
intel_crtc->dspaddr_offset =
- intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
+ intel_gen4_compute_page_offset(dev_priv,
+ &x, &y, obj->tiling_mode,
pixel_size,
fb->pitches[0]);
linear_offset -= intel_crtc->dspaddr_offset;
}
}
+ intel_crtc->adjusted_x = x;
+ intel_crtc->adjusted_y = y;
+
I915_WRITE(reg, dspcntr);
I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
}
unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
- struct drm_i915_gem_object *obj)
+ struct drm_i915_gem_object *obj,
+ unsigned int plane)
{
const struct i915_ggtt_view *view = &i915_ggtt_view_normal;
+ struct i915_vma *vma;
+ unsigned char *offset;
if (intel_rotation_90_or_270(intel_plane->base.state->rotation))
view = &i915_ggtt_view_rotated;
- return i915_gem_obj_ggtt_offset_view(obj, view);
+ vma = i915_gem_obj_to_ggtt_view(obj, view);
+ if (WARN(!vma, "ggtt vma for display object not found! (view=%u)\n",
+ view->type))
+ return -1;
+
+ offset = (unsigned char *)vma->node.start;
+
+ if (plane == 1) {
+ offset += vma->ggtt_view.rotation_info.uv_start_page *
+ PAGE_SIZE;
+ }
+
+ return (unsigned long)offset;
}
-static void skylake_update_primary_plane(struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- int x, int y)
+static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
{
- struct drm_device *dev = crtc->dev;
+ struct drm_device *dev = intel_crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct drm_i915_gem_object *obj;
- int pipe = intel_crtc->pipe;
- u32 plane_ctl, stride_div;
- unsigned long surf_addr;
- if (!intel_crtc->primary_enabled) {
- I915_WRITE(PLANE_CTL(pipe, 0), 0);
- I915_WRITE(PLANE_SURF(pipe, 0), 0);
- POSTING_READ(PLANE_CTL(pipe, 0));
- return;
- }
+ I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, id), 0);
+ I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
+ I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
+}
- plane_ctl = PLANE_CTL_ENABLE |
- PLANE_CTL_PIPE_GAMMA_ENABLE |
- PLANE_CTL_PIPE_CSC_ENABLE;
+/*
+ * This function detaches (aka. unbinds) unused scalers in hardware
+ */
+static void skl_detach_scalers(struct intel_crtc *intel_crtc)
+{
+ struct intel_crtc_scaler_state *scaler_state;
+ int i;
- switch (fb->pixel_format) {
+ scaler_state = &intel_crtc->config->scaler_state;
+
+ /* loop through and disable scalers that aren't in use */
+ for (i = 0; i < intel_crtc->num_scalers; i++) {
+ if (!scaler_state->scalers[i].in_use)
+ skl_detach_scaler(intel_crtc, i);
+ }
+}
+
+u32 skl_plane_ctl_format(uint32_t pixel_format)
+{
+ switch (pixel_format) {
+ case DRM_FORMAT_C8:
+ return PLANE_CTL_FORMAT_INDEXED;
case DRM_FORMAT_RGB565:
- plane_ctl |= PLANE_CTL_FORMAT_RGB_565;
- break;
- case DRM_FORMAT_XRGB8888:
- plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
- break;
- case DRM_FORMAT_ARGB8888:
- plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
- plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY;
- break;
+ return PLANE_CTL_FORMAT_RGB_565;
case DRM_FORMAT_XBGR8888:
- plane_ctl |= PLANE_CTL_ORDER_RGBX;
- plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
- break;
+ return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
+ case DRM_FORMAT_XRGB8888:
+ return PLANE_CTL_FORMAT_XRGB_8888;
+ /*
+ * XXX: For ARBG/ABGR formats we default to expecting scanout buffers
+ * to be already pre-multiplied. We need to add a knob (or a different
+ * DRM_FORMAT) for user-space to configure that.
+ */
case DRM_FORMAT_ABGR8888:
- plane_ctl |= PLANE_CTL_ORDER_RGBX;
- plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
- plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY;
- break;
+ return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX |
+ PLANE_CTL_ALPHA_SW_PREMULTIPLY;
+ case DRM_FORMAT_ARGB8888:
+ return PLANE_CTL_FORMAT_XRGB_8888 |
+ PLANE_CTL_ALPHA_SW_PREMULTIPLY;
case DRM_FORMAT_XRGB2101010:
- plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
- break;
+ return PLANE_CTL_FORMAT_XRGB_2101010;
case DRM_FORMAT_XBGR2101010:
- plane_ctl |= PLANE_CTL_ORDER_RGBX;
- plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
- break;
+ return PLANE_CTL_ORDER_RGBX | PLANE_CTL_FORMAT_XRGB_2101010;
+ case DRM_FORMAT_YUYV:
+ return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
+ case DRM_FORMAT_YVYU:
+ return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
+ case DRM_FORMAT_UYVY:
+ return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
+ case DRM_FORMAT_VYUY:
+ return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
default:
- BUG();
+ MISSING_CASE(pixel_format);
}
- switch (fb->modifier[0]) {
+ return 0;
+}
+
+u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
+{
+ switch (fb_modifier) {
case DRM_FORMAT_MOD_NONE:
break;
case I915_FORMAT_MOD_X_TILED:
- plane_ctl |= PLANE_CTL_TILED_X;
- break;
+ return PLANE_CTL_TILED_X;
case I915_FORMAT_MOD_Y_TILED:
- plane_ctl |= PLANE_CTL_TILED_Y;
- break;
+ return PLANE_CTL_TILED_Y;
case I915_FORMAT_MOD_Yf_TILED:
- plane_ctl |= PLANE_CTL_TILED_YF;
+ return PLANE_CTL_TILED_YF;
+ default:
+ MISSING_CASE(fb_modifier);
+ }
+
+ return 0;
+}
+
+u32 skl_plane_ctl_rotation(unsigned int rotation)
+{
+ switch (rotation) {
+ case BIT(DRM_ROTATE_0):
break;
+ /*
+ * DRM_ROTATE_ is counter clockwise to stay compatible with Xrandr
+ * while i915 HW rotation is clockwise, thats why this swapping.
+ */
+ case BIT(DRM_ROTATE_90):
+ return PLANE_CTL_ROTATE_270;
+ case BIT(DRM_ROTATE_180):
+ return PLANE_CTL_ROTATE_180;
+ case BIT(DRM_ROTATE_270):
+ return PLANE_CTL_ROTATE_90;
default:
- MISSING_CASE(fb->modifier[0]);
+ MISSING_CASE(rotation);
+ }
+
+ return 0;
+}
+
+static void skylake_update_primary_plane(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ int x, int y)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_plane *plane = crtc->primary;
+ bool visible = to_intel_plane_state(plane->state)->visible;
+ struct drm_i915_gem_object *obj;
+ int pipe = intel_crtc->pipe;
+ u32 plane_ctl, stride_div, stride;
+ u32 tile_height, plane_offset, plane_size;
+ unsigned int rotation;
+ int x_offset, y_offset;
+ unsigned long surf_addr;
+ struct intel_crtc_state *crtc_state = intel_crtc->config;
+ struct intel_plane_state *plane_state;
+ int src_x = 0, src_y = 0, src_w = 0, src_h = 0;
+ int dst_x = 0, dst_y = 0, dst_w = 0, dst_h = 0;
+ int scaler_id = -1;
+
+ plane_state = to_intel_plane_state(plane->state);
+
+ if (!visible || !fb) {
+ I915_WRITE(PLANE_CTL(pipe, 0), 0);
+ I915_WRITE(PLANE_SURF(pipe, 0), 0);
+ POSTING_READ(PLANE_CTL(pipe, 0));
+ return;
}
+ plane_ctl = PLANE_CTL_ENABLE |
+ PLANE_CTL_PIPE_GAMMA_ENABLE |
+ PLANE_CTL_PIPE_CSC_ENABLE;
+
+ plane_ctl |= skl_plane_ctl_format(fb->pixel_format);
+ plane_ctl |= skl_plane_ctl_tiling(fb->modifier[0]);
plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
- if (crtc->primary->state->rotation == BIT(DRM_ROTATE_180))
- plane_ctl |= PLANE_CTL_ROTATE_180;
+
+ rotation = plane->state->rotation;
+ plane_ctl |= skl_plane_ctl_rotation(rotation);
obj = intel_fb_obj(fb);
stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
fb->pixel_format);
- surf_addr = intel_plane_obj_offset(to_intel_plane(crtc->primary), obj);
+ surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj, 0);
+
+ WARN_ON(drm_rect_width(&plane_state->src) == 0);
+
+ scaler_id = plane_state->scaler_id;
+ src_x = plane_state->src.x1 >> 16;
+ src_y = plane_state->src.y1 >> 16;
+ src_w = drm_rect_width(&plane_state->src) >> 16;
+ src_h = drm_rect_height(&plane_state->src) >> 16;
+ dst_x = plane_state->dst.x1;
+ dst_y = plane_state->dst.y1;
+ dst_w = drm_rect_width(&plane_state->dst);
+ dst_h = drm_rect_height(&plane_state->dst);
+
+ WARN_ON(x != src_x || y != src_y);
+
+ if (intel_rotation_90_or_270(rotation)) {
+ /* stride = Surface height in tiles */
+ tile_height = intel_tile_height(dev, fb->pixel_format,
+ fb->modifier[0], 0);
+ stride = DIV_ROUND_UP(fb->height, tile_height);
+ x_offset = stride * tile_height - y - src_h;
+ y_offset = x;
+ plane_size = (src_w - 1) << 16 | (src_h - 1);
+ } else {
+ stride = fb->pitches[0] / stride_div;
+ x_offset = x;
+ y_offset = y;
+ plane_size = (src_h - 1) << 16 | (src_w - 1);
+ }
+ plane_offset = y_offset << 16 | x_offset;
+
+ intel_crtc->adjusted_x = x_offset;
+ intel_crtc->adjusted_y = y_offset;
I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
- I915_WRITE(PLANE_POS(pipe, 0), 0);
- I915_WRITE(PLANE_OFFSET(pipe, 0), (y << 16) | x);
- I915_WRITE(PLANE_SIZE(pipe, 0),
- (intel_crtc->config->pipe_src_h - 1) << 16 |
- (intel_crtc->config->pipe_src_w - 1));
- I915_WRITE(PLANE_STRIDE(pipe, 0), fb->pitches[0] / stride_div);
+ I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
+ I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
+ I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
+
+ if (scaler_id >= 0) {
+ uint32_t ps_ctrl = 0;
+
+ WARN_ON(!dst_w || !dst_h);
+ ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
+ crtc_state->scaler_state.scalers[scaler_id].mode;
+ I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
+ I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
+ I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (dst_x << 16) | dst_y);
+ I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) | dst_h);
+ I915_WRITE(PLANE_POS(pipe, 0), 0);
+ } else {
+ I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
+ }
+
I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
POSTING_READ(PLANE_SURF(pipe, 0));
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- if (dev_priv->display.disable_fbc)
- dev_priv->display.disable_fbc(dev);
+ if (dev_priv->fbc.disable_fbc)
+ dev_priv->fbc.disable_fbc(dev_priv);
dev_priv->display.update_primary_plane(crtc, fb, x, y);
static void intel_update_primary_planes(struct drm_device *dev)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
for_each_crtc(dev, crtc) {
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_plane *plane = to_intel_plane(crtc->primary);
+ struct intel_plane_state *plane_state;
- drm_modeset_lock(&crtc->mutex, NULL);
- /*
- * FIXME: Once we have proper support for primary planes (and
- * disabling them without disabling the entire crtc) allow again
- * a NULL crtc->primary->fb.
- */
- if (intel_crtc->active && crtc->primary->fb)
- dev_priv->display.update_primary_plane(crtc,
- crtc->primary->fb,
- crtc->x,
- crtc->y);
- drm_modeset_unlock(&crtc->mutex);
+ drm_modeset_lock_crtc(crtc, &plane->base);
+
+ plane_state = to_intel_plane_state(plane->base.state);
+
+ if (plane_state->base.fb)
+ plane->commit_plane(&plane->base, plane_state);
+
+ drm_modeset_unlock_crtc(crtc);
}
}
void intel_prepare_reset(struct drm_device *dev)
{
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_crtc *crtc;
-
/* no reset support for gen2 */
if (IS_GEN2(dev))
return;
return;
drm_modeset_lock_all(dev);
-
/*
* Disabling the crtcs gracefully seems nicer. Also the
* g33 docs say we should at least disable all the planes.
*/
- for_each_intel_crtc(dev, crtc) {
- if (crtc->active)
- dev_priv->display.crtc_disable(&crtc->base);
- }
+ intel_display_suspend(dev);
}
void intel_finish_reset(struct drm_device *dev)
* so update the base address of all primary
* planes to the the last fb to make sure we're
* showing the correct fb after a reset.
+ *
+ * FIXME: Atomic will make this obsolete since we won't schedule
+ * CS-based flips (which might get lost in gpu resets) any more.
*/
intel_update_primary_planes(dev);
return;
dev_priv->display.hpd_irq_setup(dev);
spin_unlock_irq(&dev_priv->irq_lock);
- intel_modeset_setup_hw_state(dev, true);
+ intel_display_resume(dev);
intel_hpd_init(dev_priv);
drm_modeset_unlock_all(dev);
}
-static int
+static void
intel_finish_fb(struct drm_framebuffer *old_fb)
{
struct drm_i915_gem_object *obj = intel_fb_obj(old_fb);
- struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
+ struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
bool was_interruptible = dev_priv->mm.interruptible;
int ret;
/* Big Hammer, we also need to ensure that any pending
* MI_WAIT_FOR_EVENT inside a user batch buffer on the
* current scanout is retired before unpinning the old
- * framebuffer.
+ * framebuffer. Note that we rely on userspace rendering
+ * into the buffer attached to the pipe they are waiting
+ * on. If not, userspace generates a GPU hang with IPEHR
+ * point to the MI_WAIT_FOR_EVENT.
*
* This should only fail upon a hung GPU, in which case we
* can safely continue.
*/
dev_priv->mm.interruptible = false;
- ret = i915_gem_object_finish_gpu(obj);
+ ret = i915_gem_object_wait_rendering(obj, true);
dev_priv->mm.interruptible = was_interruptible;
- return ret;
+ WARN_ON(ret);
}
static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
return pending;
}
-static void intel_update_pipe_size(struct intel_crtc *crtc)
+static void intel_update_pipe_config(struct intel_crtc *crtc,
+ struct intel_crtc_state *old_crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- const struct drm_display_mode *adjusted_mode;
+ struct intel_crtc_state *pipe_config =
+ to_intel_crtc_state(crtc->base.state);
- if (!i915.fastboot)
- return;
+ /* drm_atomic_helper_update_legacy_modeset_state might not be called. */
+ crtc->base.mode = crtc->base.state->mode;
+
+ DRM_DEBUG_KMS("Updating pipe size %ix%i -> %ix%i\n",
+ old_crtc_state->pipe_src_w, old_crtc_state->pipe_src_h,
+ pipe_config->pipe_src_w, pipe_config->pipe_src_h);
+
+ if (HAS_DDI(dev))
+ intel_set_pipe_csc(&crtc->base);
/*
* Update pipe size and adjust fitter if needed: the reason for this is
* fastboot case, we'll flip, but if we don't update the pipesrc and
* pfit state, we'll end up with a big fb scanned out into the wrong
* sized surface.
- *
- * To fix this properly, we need to hoist the checks up into
- * compute_mode_changes (or above), check the actual pfit state and
- * whether the platform allows pfit disable with pipe active, and only
- * then update the pipesrc and pfit state, even on the flip path.
*/
- adjusted_mode = &crtc->config->base.adjusted_mode;
-
I915_WRITE(PIPESRC(crtc->pipe),
- ((adjusted_mode->crtc_hdisplay - 1) << 16) |
- (adjusted_mode->crtc_vdisplay - 1));
- if (!crtc->config->pch_pfit.enabled &&
- (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
- I915_WRITE(PF_CTL(crtc->pipe), 0);
- I915_WRITE(PF_WIN_POS(crtc->pipe), 0);
- I915_WRITE(PF_WIN_SZ(crtc->pipe), 0);
+ ((pipe_config->pipe_src_w - 1) << 16) |
+ (pipe_config->pipe_src_h - 1));
+
+ /* on skylake this is done by detaching scalers */
+ if (INTEL_INFO(dev)->gen >= 9) {
+ skl_detach_scalers(crtc);
+
+ if (pipe_config->pch_pfit.enabled)
+ skylake_pfit_enable(crtc);
+ } else if (HAS_PCH_SPLIT(dev)) {
+ if (pipe_config->pch_pfit.enabled)
+ ironlake_pfit_enable(crtc);
+ else if (old_crtc_state->pch_pfit.enabled)
+ ironlake_pfit_disable(crtc, true);
}
- crtc->config->pipe_src_w = adjusted_mode->crtc_hdisplay;
- crtc->config->pipe_src_h = adjusted_mode->crtc_vdisplay;
}
static void intel_fdi_normal_train(struct drm_crtc *crtc)
u32 divsel, phaseinc, auxdiv, phasedir = 0;
u32 temp;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
/* It is necessary to ungate the pixclk gate prior to programming
* the divisors, and gate it back when it is done.
I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
}
static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
temp &= ~(TRANS_DP_PORT_SEL_MASK |
TRANS_DP_SYNC_MASK |
TRANS_DP_BPC_MASK);
- temp |= (TRANS_DP_OUTPUT_ENABLE |
- TRANS_DP_ENH_FRAMING);
+ temp |= TRANS_DP_OUTPUT_ENABLE;
temp |= bpc << 9; /* same format but at 11:9 */
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
}
-void intel_put_shared_dpll(struct intel_crtc *crtc)
-{
- struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
-
- if (pll == NULL)
- return;
-
- if (!(pll->config.crtc_mask & (1 << crtc->pipe))) {
- WARN(1, "bad %s crtc mask\n", pll->name);
- return;
- }
-
- pll->config.crtc_mask &= ~(1 << crtc->pipe);
- if (pll->config.crtc_mask == 0) {
- WARN_ON(pll->on);
- WARN_ON(pll->active);
- }
-
- crtc->config->shared_dpll = DPLL_ID_PRIVATE;
-}
-
struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
struct intel_shared_dpll *pll;
+ struct intel_shared_dpll_config *shared_dpll;
enum intel_dpll_id i;
+ int max = dev_priv->num_shared_dpll;
+
+ shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state);
if (HAS_PCH_IBX(dev_priv->dev)) {
/* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
crtc->base.base.id, pll->name);
- WARN_ON(pll->new_config->crtc_mask);
+ WARN_ON(shared_dpll[i].crtc_mask);
goto found;
}
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
+ if (IS_BROXTON(dev_priv->dev)) {
+ /* PLL is attached to port in bxt */
+ struct intel_encoder *encoder;
+ struct intel_digital_port *intel_dig_port;
+
+ encoder = intel_ddi_get_crtc_new_encoder(crtc_state);
+ if (WARN_ON(!encoder))
+ return NULL;
+
+ intel_dig_port = enc_to_dig_port(&encoder->base);
+ /* 1:1 mapping between ports and PLLs */
+ i = (enum intel_dpll_id)intel_dig_port->port;
+ pll = &dev_priv->shared_dplls[i];
+ DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
+ crtc->base.base.id, pll->name);
+ WARN_ON(shared_dpll[i].crtc_mask);
+
+ goto found;
+ } else if (INTEL_INFO(dev_priv)->gen < 9 && HAS_DDI(dev_priv))
+ /* Do not consider SPLL */
+ max = 2;
+
+ for (i = 0; i < max; i++) {
pll = &dev_priv->shared_dplls[i];
/* Only want to check enabled timings first */
- if (pll->new_config->crtc_mask == 0)
+ if (shared_dpll[i].crtc_mask == 0)
continue;
if (memcmp(&crtc_state->dpll_hw_state,
- &pll->new_config->hw_state,
- sizeof(pll->new_config->hw_state)) == 0) {
+ &shared_dpll[i].hw_state,
+ sizeof(crtc_state->dpll_hw_state)) == 0) {
DRM_DEBUG_KMS("CRTC:%d sharing existing %s (crtc mask 0x%08x, ative %d)\n",
crtc->base.base.id, pll->name,
- pll->new_config->crtc_mask,
+ shared_dpll[i].crtc_mask,
pll->active);
goto found;
}
/* Ok no matching timings, maybe there's a free one? */
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
pll = &dev_priv->shared_dplls[i];
- if (pll->new_config->crtc_mask == 0) {
+ if (shared_dpll[i].crtc_mask == 0) {
DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
crtc->base.base.id, pll->name);
goto found;
return NULL;
found:
- if (pll->new_config->crtc_mask == 0)
- pll->new_config->hw_state = crtc_state->dpll_hw_state;
+ if (shared_dpll[i].crtc_mask == 0)
+ shared_dpll[i].hw_state =
+ crtc_state->dpll_hw_state;
crtc_state->shared_dpll = i;
DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
pipe_name(crtc->pipe));
- pll->new_config->crtc_mask |= 1 << crtc->pipe;
+ shared_dpll[i].crtc_mask |= 1 << crtc->pipe;
return pll;
}
-/**
- * intel_shared_dpll_start_config - start a new PLL staged config
- * @dev_priv: DRM device
- * @clear_pipes: mask of pipes that will have their PLLs freed
- *
- * Starts a new PLL staged config, copying the current config but
- * releasing the references of pipes specified in clear_pipes.
- */
-static int intel_shared_dpll_start_config(struct drm_i915_private *dev_priv,
- unsigned clear_pipes)
+static void intel_shared_dpll_commit(struct drm_atomic_state *state)
{
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ struct intel_shared_dpll_config *shared_dpll;
struct intel_shared_dpll *pll;
enum intel_dpll_id i;
+ if (!to_intel_atomic_state(state)->dpll_set)
+ return;
+
+ shared_dpll = to_intel_atomic_state(state)->shared_dpll;
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
pll = &dev_priv->shared_dplls[i];
-
- pll->new_config = kmemdup(&pll->config, sizeof pll->config,
- GFP_KERNEL);
- if (!pll->new_config)
- goto cleanup;
-
- pll->new_config->crtc_mask &= ~clear_pipes;
+ pll->config = shared_dpll[i];
}
+}
- return 0;
+static void cpt_verify_modeset(struct drm_device *dev, int pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int dslreg = PIPEDSL(pipe);
+ u32 temp;
-cleanup:
- while (--i >= 0) {
- pll = &dev_priv->shared_dplls[i];
- kfree(pll->new_config);
- pll->new_config = NULL;
+ temp = I915_READ(dslreg);
+ udelay(500);
+ if (wait_for(I915_READ(dslreg) != temp, 5)) {
+ if (wait_for(I915_READ(dslreg) != temp, 5))
+ DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
}
-
- return -ENOMEM;
}
-static void intel_shared_dpll_commit(struct drm_i915_private *dev_priv)
+static int
+skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
+ unsigned scaler_user, int *scaler_id, unsigned int rotation,
+ int src_w, int src_h, int dst_w, int dst_h)
{
- struct intel_shared_dpll *pll;
- enum intel_dpll_id i;
+ struct intel_crtc_scaler_state *scaler_state =
+ &crtc_state->scaler_state;
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(crtc_state->base.crtc);
+ int need_scaling;
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
- pll = &dev_priv->shared_dplls[i];
+ need_scaling = intel_rotation_90_or_270(rotation) ?
+ (src_h != dst_w || src_w != dst_h):
+ (src_w != dst_w || src_h != dst_h);
+
+ /*
+ * if plane is being disabled or scaler is no more required or force detach
+ * - free scaler binded to this plane/crtc
+ * - in order to do this, update crtc->scaler_usage
+ *
+ * Here scaler state in crtc_state is set free so that
+ * scaler can be assigned to other user. Actual register
+ * update to free the scaler is done in plane/panel-fit programming.
+ * For this purpose crtc/plane_state->scaler_id isn't reset here.
+ */
+ if (force_detach || !need_scaling) {
+ if (*scaler_id >= 0) {
+ scaler_state->scaler_users &= ~(1 << scaler_user);
+ scaler_state->scalers[*scaler_id].in_use = 0;
- WARN_ON(pll->new_config == &pll->config);
+ DRM_DEBUG_KMS("scaler_user index %u.%u: "
+ "Staged freeing scaler id %d scaler_users = 0x%x\n",
+ intel_crtc->pipe, scaler_user, *scaler_id,
+ scaler_state->scaler_users);
+ *scaler_id = -1;
+ }
+ return 0;
+ }
+
+ /* range checks */
+ if (src_w < SKL_MIN_SRC_W || src_h < SKL_MIN_SRC_H ||
+ dst_w < SKL_MIN_DST_W || dst_h < SKL_MIN_DST_H ||
- pll->config = *pll->new_config;
- kfree(pll->new_config);
- pll->new_config = NULL;
+ src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
+ dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H) {
+ DRM_DEBUG_KMS("scaler_user index %u.%u: src %ux%u dst %ux%u "
+ "size is out of scaler range\n",
+ intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h);
+ return -EINVAL;
}
+
+ /* mark this plane as a scaler user in crtc_state */
+ scaler_state->scaler_users |= (1 << scaler_user);
+ DRM_DEBUG_KMS("scaler_user index %u.%u: "
+ "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n",
+ intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h,
+ scaler_state->scaler_users);
+
+ return 0;
}
-static void intel_shared_dpll_abort_config(struct drm_i915_private *dev_priv)
+/**
+ * skl_update_scaler_crtc - Stages update to scaler state for a given crtc.
+ *
+ * @state: crtc's scaler state
+ *
+ * Return
+ * 0 - scaler_usage updated successfully
+ * error - requested scaling cannot be supported or other error condition
+ */
+int skl_update_scaler_crtc(struct intel_crtc_state *state)
{
- struct intel_shared_dpll *pll;
- enum intel_dpll_id i;
+ struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc);
+ const struct drm_display_mode *adjusted_mode = &state->base.adjusted_mode;
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
- pll = &dev_priv->shared_dplls[i];
+ DRM_DEBUG_KMS("Updating scaler for [CRTC:%i] scaler_user index %u.%u\n",
+ intel_crtc->base.base.id, intel_crtc->pipe, SKL_CRTC_INDEX);
+
+ return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
+ &state->scaler_state.scaler_id, DRM_ROTATE_0,
+ state->pipe_src_w, state->pipe_src_h,
+ adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay);
+}
+
+/**
+ * skl_update_scaler_plane - Stages update to scaler state for a given plane.
+ *
+ * @state: crtc's scaler state
+ * @plane_state: atomic plane state to update
+ *
+ * Return
+ * 0 - scaler_usage updated successfully
+ * error - requested scaling cannot be supported or other error condition
+ */
+static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
+ struct intel_plane_state *plane_state)
+{
- WARN_ON(pll->new_config == &pll->config);
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct intel_plane *intel_plane =
+ to_intel_plane(plane_state->base.plane);
+ struct drm_framebuffer *fb = plane_state->base.fb;
+ int ret;
+
+ bool force_detach = !fb || !plane_state->visible;
+
+ DRM_DEBUG_KMS("Updating scaler for [PLANE:%d] scaler_user index %u.%u\n",
+ intel_plane->base.base.id, intel_crtc->pipe,
+ drm_plane_index(&intel_plane->base));
+
+ ret = skl_update_scaler(crtc_state, force_detach,
+ drm_plane_index(&intel_plane->base),
+ &plane_state->scaler_id,
+ plane_state->base.rotation,
+ drm_rect_width(&plane_state->src) >> 16,
+ drm_rect_height(&plane_state->src) >> 16,
+ drm_rect_width(&plane_state->dst),
+ drm_rect_height(&plane_state->dst));
+
+ if (ret || plane_state->scaler_id < 0)
+ return ret;
+
+ /* check colorkey */
+ if (plane_state->ckey.flags != I915_SET_COLORKEY_NONE) {
+ DRM_DEBUG_KMS("[PLANE:%d] scaling with color key not allowed",
+ intel_plane->base.base.id);
+ return -EINVAL;
+ }
- kfree(pll->new_config);
- pll->new_config = NULL;
+ /* Check src format */
+ switch (fb->pixel_format) {
+ case DRM_FORMAT_RGB565:
+ case DRM_FORMAT_XBGR8888:
+ case DRM_FORMAT_XRGB8888:
+ case DRM_FORMAT_ABGR8888:
+ case DRM_FORMAT_ARGB8888:
+ case DRM_FORMAT_XRGB2101010:
+ case DRM_FORMAT_XBGR2101010:
+ case DRM_FORMAT_YUYV:
+ case DRM_FORMAT_YVYU:
+ case DRM_FORMAT_UYVY:
+ case DRM_FORMAT_VYUY:
+ break;
+ default:
+ DRM_DEBUG_KMS("[PLANE:%d] FB:%d unsupported scaling format 0x%x\n",
+ intel_plane->base.base.id, fb->base.id, fb->pixel_format);
+ return -EINVAL;
}
+
+ return 0;
}
-static void cpt_verify_modeset(struct drm_device *dev, int pipe)
+static void skylake_scaler_disable(struct intel_crtc *crtc)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
- int dslreg = PIPEDSL(pipe);
- u32 temp;
+ int i;
- temp = I915_READ(dslreg);
- udelay(500);
- if (wait_for(I915_READ(dslreg) != temp, 5)) {
- if (wait_for(I915_READ(dslreg) != temp, 5))
- DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
- }
+ for (i = 0; i < crtc->num_scalers; i++)
+ skl_detach_scaler(crtc, i);
}
static void skylake_pfit_enable(struct intel_crtc *crtc)
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe = crtc->pipe;
+ struct intel_crtc_scaler_state *scaler_state =
+ &crtc->config->scaler_state;
+
+ DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config);
if (crtc->config->pch_pfit.enabled) {
- I915_WRITE(PS_CTL(pipe), PS_ENABLE);
- I915_WRITE(PS_WIN_POS(pipe), crtc->config->pch_pfit.pos);
- I915_WRITE(PS_WIN_SZ(pipe), crtc->config->pch_pfit.size);
+ int id;
+
+ if (WARN_ON(crtc->config->scaler_state.scaler_id < 0)) {
+ DRM_ERROR("Requesting pfit without getting a scaler first\n");
+ return;
+ }
+
+ id = scaler_state->scaler_id;
+ I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
+ PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
+ I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc->config->pch_pfit.pos);
+ I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc->config->pch_pfit.size);
+
+ DRM_DEBUG_KMS("for crtc_state = %p scaler_id = %d\n", crtc->config, id);
}
}
}
}
-static void intel_enable_sprite_planes(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- enum pipe pipe = to_intel_crtc(crtc)->pipe;
- struct drm_plane *plane;
- struct intel_plane *intel_plane;
-
- drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
- intel_plane = to_intel_plane(plane);
- if (intel_plane->pipe == pipe)
- intel_plane_restore(&intel_plane->base);
- }
-}
-
-/*
- * Disable a plane internally without actually modifying the plane's state.
- * This will allow us to easily restore the plane later by just reprogramming
- * its state.
- */
-static void disable_plane_internal(struct drm_plane *plane)
-{
- struct intel_plane *intel_plane = to_intel_plane(plane);
- struct drm_plane_state *state =
- plane->funcs->atomic_duplicate_state(plane);
- struct intel_plane_state *intel_state = to_intel_plane_state(state);
-
- intel_state->visible = false;
- intel_plane->commit_plane(plane, intel_state);
-
- intel_plane_destroy_state(plane, state);
-}
-
-static void intel_disable_sprite_planes(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- enum pipe pipe = to_intel_crtc(crtc)->pipe;
- struct drm_plane *plane;
- struct intel_plane *intel_plane;
-
- drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
- intel_plane = to_intel_plane(plane);
- if (plane->fb && intel_plane->pipe == pipe)
- disable_plane_internal(plane);
- }
-}
-
void hsw_enable_ips(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
enum pipe pipe = intel_crtc->pipe;
- int palreg = PALETTE(pipe);
int i;
bool reenable_ips = false;
/* The clocks have to be on to load the palette. */
- if (!crtc->state->enable || !intel_crtc->active)
+ if (!crtc->state->active)
return;
- if (!HAS_PCH_SPLIT(dev_priv->dev)) {
+ if (HAS_GMCH_DISPLAY(dev_priv->dev)) {
if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI))
assert_dsi_pll_enabled(dev_priv);
else
assert_pll_enabled(dev_priv, pipe);
}
- /* use legacy palette for Ironlake */
- if (!HAS_GMCH_DISPLAY(dev))
- palreg = LGC_PALETTE(pipe);
-
/* Workaround : Do not read or write the pipe palette/gamma data while
* GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
*/
}
for (i = 0; i < 256; i++) {
- I915_WRITE(palreg + 4 * i,
+ u32 palreg;
+
+ if (HAS_GMCH_DISPLAY(dev))
+ palreg = PALETTE(pipe, i);
+ else
+ palreg = LGC_PALETTE(pipe, i);
+
+ I915_WRITE(palreg,
(intel_crtc->lut_r[i] << 16) |
(intel_crtc->lut_g[i] << 8) |
intel_crtc->lut_b[i]);
hsw_enable_ips(intel_crtc);
}
-static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
+static void intel_crtc_dpms_overlay_disable(struct intel_crtc *intel_crtc)
{
- if (!enable && intel_crtc->overlay) {
+ if (intel_crtc->overlay) {
struct drm_device *dev = intel_crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
*/
}
-static void intel_crtc_enable_planes(struct drm_crtc *crtc)
+/**
+ * intel_post_enable_primary - Perform operations after enabling primary plane
+ * @crtc: the CRTC whose primary plane was just enabled
+ *
+ * Performs potentially sleeping operations that must be done after the primary
+ * plane is enabled, such as updating FBC and IPS. Note that this may be
+ * called due to an explicit primary plane update, or due to an implicit
+ * re-enable that is caused when a sprite plane is updated to no longer
+ * completely hide the primary plane.
+ */
+static void
+intel_post_enable_primary(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- intel_enable_primary_hw_plane(crtc->primary, crtc);
- intel_enable_sprite_planes(crtc);
- intel_crtc_update_cursor(crtc, true);
- intel_crtc_dpms_overlay(intel_crtc, true);
+ /*
+ * BDW signals flip done immediately if the plane
+ * is disabled, even if the plane enable is already
+ * armed to occur at the next vblank :(
+ */
+ if (IS_BROADWELL(dev))
+ intel_wait_for_vblank(dev, pipe);
+ /*
+ * FIXME IPS should be fine as long as one plane is
+ * enabled, but in practice it seems to have problems
+ * when going from primary only to sprite only and vice
+ * versa.
+ */
hsw_enable_ips(intel_crtc);
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
-
/*
- * FIXME: Once we grow proper nuclear flip support out of this we need
- * to compute the mask of flip planes precisely. For the time being
- * consider this a flip from a NULL plane.
+ * Gen2 reports pipe underruns whenever all planes are disabled.
+ * So don't enable underrun reporting before at least some planes
+ * are enabled.
+ * FIXME: Need to fix the logic to work when we turn off all planes
+ * but leave the pipe running.
*/
- intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
+ if (IS_GEN2(dev))
+ intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
+
+ /* Underruns don't raise interrupts, so check manually. */
+ if (HAS_GMCH_DISPLAY(dev))
+ i9xx_check_fifo_underruns(dev_priv);
}
-static void intel_crtc_disable_planes(struct drm_crtc *crtc)
+/**
+ * intel_pre_disable_primary - Perform operations before disabling primary plane
+ * @crtc: the CRTC whose primary plane is to be disabled
+ *
+ * Performs potentially sleeping operations that must be done before the
+ * primary plane is disabled, such as updating FBC and IPS. Note that this may
+ * be called due to an explicit primary plane update, or due to an implicit
+ * disable that is caused when a sprite plane completely hides the primary
+ * plane.
+ */
+static void
+intel_pre_disable_primary(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- intel_crtc_wait_for_pending_flips(crtc);
+ /*
+ * Gen2 reports pipe underruns whenever all planes are disabled.
+ * So diasble underrun reporting before all the planes get disabled.
+ * FIXME: Need to fix the logic to work when we turn off all planes
+ * but leave the pipe running.
+ */
+ if (IS_GEN2(dev))
+ intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
- if (dev_priv->fbc.crtc == intel_crtc)
- intel_fbc_disable(dev);
+ /*
+ * Vblank time updates from the shadow to live plane control register
+ * are blocked if the memory self-refresh mode is active at that
+ * moment. So to make sure the plane gets truly disabled, disable
+ * first the self-refresh mode. The self-refresh enable bit in turn
+ * will be checked/applied by the HW only at the next frame start
+ * event which is after the vblank start event, so we need to have a
+ * wait-for-vblank between disabling the plane and the pipe.
+ */
+ if (HAS_GMCH_DISPLAY(dev)) {
+ intel_set_memory_cxsr(dev_priv, false);
+ dev_priv->wm.vlv.cxsr = false;
+ intel_wait_for_vblank(dev, pipe);
+ }
+ /*
+ * FIXME IPS should be fine as long as one plane is
+ * enabled, but in practice it seems to have problems
+ * when going from primary only to sprite only and vice
+ * versa.
+ */
hsw_disable_ips(intel_crtc);
+}
- intel_crtc_dpms_overlay(intel_crtc, false);
- intel_crtc_update_cursor(crtc, false);
- intel_disable_sprite_planes(crtc);
- intel_disable_primary_hw_plane(crtc->primary, crtc);
+static void intel_post_plane_update(struct intel_crtc *crtc)
+{
+ struct intel_crtc_atomic_commit *atomic = &crtc->atomic;
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_plane *plane;
+
+ if (atomic->wait_vblank)
+ intel_wait_for_vblank(dev, crtc->pipe);
+
+ intel_frontbuffer_flip(dev, atomic->fb_bits);
+
+ if (atomic->disable_cxsr)
+ crtc->wm.cxsr_allowed = true;
+
+ if (crtc->atomic.update_wm_post)
+ intel_update_watermarks(&crtc->base);
+
+ if (atomic->update_fbc)
+ intel_fbc_update(dev_priv);
+
+ if (atomic->post_enable_primary)
+ intel_post_enable_primary(&crtc->base);
+
+ drm_for_each_plane_mask(plane, dev, atomic->update_sprite_watermarks)
+ intel_update_sprite_watermarks(plane, &crtc->base,
+ 0, 0, 0, false, false);
+
+ memset(atomic, 0, sizeof(*atomic));
+}
+
+static void intel_pre_plane_update(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc_atomic_commit *atomic = &crtc->atomic;
+ struct drm_plane *p;
+
+ /* Track fb's for any planes being disabled */
+ drm_for_each_plane_mask(p, dev, atomic->disabled_planes) {
+ struct intel_plane *plane = to_intel_plane(p);
+
+ mutex_lock(&dev->struct_mutex);
+ i915_gem_track_fb(intel_fb_obj(plane->base.fb), NULL,
+ plane->frontbuffer_bit);
+ mutex_unlock(&dev->struct_mutex);
+ }
+
+ if (atomic->wait_for_flips)
+ intel_crtc_wait_for_pending_flips(&crtc->base);
+
+ if (atomic->disable_fbc)
+ intel_fbc_disable_crtc(crtc);
+
+ if (crtc->atomic.disable_ips)
+ hsw_disable_ips(crtc);
+
+ if (atomic->pre_disable_primary)
+ intel_pre_disable_primary(&crtc->base);
+
+ if (atomic->disable_cxsr) {
+ crtc->wm.cxsr_allowed = false;
+ intel_set_memory_cxsr(dev_priv, false);
+ }
+}
+
+static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask)
+{
+ struct drm_device *dev = crtc->dev;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_plane *p;
+ int pipe = intel_crtc->pipe;
+
+ intel_crtc_dpms_overlay_disable(intel_crtc);
+
+ drm_for_each_plane_mask(p, dev, plane_mask)
+ to_intel_plane(p)->disable_plane(p, crtc);
/*
* FIXME: Once we grow proper nuclear flip support out of this we need
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
if (intel_crtc->config->has_pch_encoder)
if (HAS_PCH_CPT(dev))
cpt_verify_modeset(dev, intel_crtc->pipe);
-
- intel_crtc_enable_planes(crtc);
}
/* IPS only exists on ULT machines and is tied to pipe A. */
return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
}
-/*
- * This implements the workaround described in the "notes" section of the mode
- * set sequence documentation. When going from no pipes or single pipe to
- * multiple pipes, and planes are enabled after the pipe, we need to wait at
- * least 2 vblanks on the first pipe before enabling planes on the second pipe.
- */
-static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct intel_crtc *crtc_it, *other_active_crtc = NULL;
-
- /* We want to get the other_active_crtc only if there's only 1 other
- * active crtc. */
- for_each_intel_crtc(dev, crtc_it) {
- if (!crtc_it->active || crtc_it == crtc)
- continue;
-
- if (other_active_crtc)
- return;
-
- other_active_crtc = crtc_it;
- }
- if (!other_active_crtc)
- return;
-
- intel_wait_for_vblank(dev, other_active_crtc->pipe);
- intel_wait_for_vblank(dev, other_active_crtc->pipe);
-}
-
static void haswell_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
- int pipe = intel_crtc->pipe;
+ int pipe = intel_crtc->pipe, hsw_workaround_pipe;
+ struct intel_crtc_state *pipe_config =
+ to_intel_crtc_state(crtc->state);
+ bool is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
if (intel_crtc_to_shared_dpll(intel_crtc))
intel_crtc->active = true;
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
- for_each_encoder_on_crtc(dev, crtc, encoder)
+ for_each_encoder_on_crtc(dev, crtc, encoder) {
+ if (encoder->pre_pll_enable)
+ encoder->pre_pll_enable(encoder);
if (encoder->pre_enable)
encoder->pre_enable(encoder);
+ }
if (intel_crtc->config->has_pch_encoder) {
intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
dev_priv->display.fdi_link_train(crtc);
}
- intel_ddi_enable_pipe_clock(intel_crtc);
+ if (!is_dsi)
+ intel_ddi_enable_pipe_clock(intel_crtc);
- if (IS_SKYLAKE(dev))
+ if (INTEL_INFO(dev)->gen >= 9)
skylake_pfit_enable(intel_crtc);
else
ironlake_pfit_enable(intel_crtc);
intel_crtc_load_lut(crtc);
intel_ddi_set_pipe_settings(crtc);
- intel_ddi_enable_transcoder_func(crtc);
+ if (!is_dsi)
+ intel_ddi_enable_transcoder_func(crtc);
intel_update_watermarks(crtc);
intel_enable_pipe(intel_crtc);
if (intel_crtc->config->has_pch_encoder)
lpt_pch_enable(crtc);
- if (intel_crtc->config->dp_encoder_is_mst)
+ if (intel_crtc->config->dp_encoder_is_mst && !is_dsi)
intel_ddi_set_vc_payload_alloc(crtc, true);
assert_vblank_disabled(crtc);
/* If we change the relative order between pipe/planes enabling, we need
* to change the workaround. */
- haswell_mode_set_planes_workaround(intel_crtc);
- intel_crtc_enable_planes(crtc);
-}
-
-static void skylake_pfit_disable(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = crtc->pipe;
-
- /* To avoid upsetting the power well on haswell only disable the pfit if
- * it's in use. The hw state code will make sure we get this right. */
- if (crtc->config->pch_pfit.enabled) {
- I915_WRITE(PS_CTL(pipe), 0);
- I915_WRITE(PS_WIN_POS(pipe), 0);
- I915_WRITE(PS_WIN_SZ(pipe), 0);
+ hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
+ if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
+ intel_wait_for_vblank(dev, hsw_workaround_pipe);
+ intel_wait_for_vblank(dev, hsw_workaround_pipe);
}
}
-static void ironlake_pfit_disable(struct intel_crtc *crtc)
+static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
/* To avoid upsetting the power well on haswell only disable the pfit if
* it's in use. The hw state code will make sure we get this right. */
- if (crtc->config->pch_pfit.enabled) {
+ if (force || crtc->config->pch_pfit.enabled) {
I915_WRITE(PF_CTL(pipe), 0);
I915_WRITE(PF_WIN_POS(pipe), 0);
I915_WRITE(PF_WIN_SZ(pipe), 0);
int pipe = intel_crtc->pipe;
u32 reg, temp;
- if (!intel_crtc->active)
- return;
-
- intel_crtc_disable_planes(crtc);
-
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->disable(encoder);
intel_disable_pipe(intel_crtc);
- ironlake_pfit_disable(intel_crtc);
+ ironlake_pfit_disable(intel_crtc, false);
+
+ if (intel_crtc->config->has_pch_encoder)
+ ironlake_fdi_disable(crtc);
for_each_encoder_on_crtc(dev, crtc, encoder)
if (encoder->post_disable)
encoder->post_disable(encoder);
if (intel_crtc->config->has_pch_encoder) {
- ironlake_fdi_disable(crtc);
-
ironlake_disable_pch_transcoder(dev_priv, pipe);
if (HAS_PCH_CPT(dev)) {
I915_WRITE(PCH_DPLL_SEL, temp);
}
- /* disable PCH DPLL */
- intel_disable_shared_dpll(intel_crtc);
-
ironlake_fdi_pll_disable(intel_crtc);
}
-
- intel_crtc->active = false;
- intel_update_watermarks(crtc);
-
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
-}
+}
static void haswell_crtc_disable(struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
-
- if (!intel_crtc->active)
- return;
-
- intel_crtc_disable_planes(crtc);
+ bool is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
for_each_encoder_on_crtc(dev, crtc, encoder) {
intel_opregion_notify_encoder(encoder, false);
if (intel_crtc->config->dp_encoder_is_mst)
intel_ddi_set_vc_payload_alloc(crtc, false);
- intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
+ if (!is_dsi)
+ intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
- if (IS_SKYLAKE(dev))
- skylake_pfit_disable(intel_crtc);
+ if (INTEL_INFO(dev)->gen >= 9)
+ skylake_scaler_disable(intel_crtc);
else
- ironlake_pfit_disable(intel_crtc);
+ ironlake_pfit_disable(intel_crtc, false);
- intel_ddi_disable_pipe_clock(intel_crtc);
+ if (!is_dsi)
+ intel_ddi_disable_pipe_clock(intel_crtc);
if (intel_crtc->config->has_pch_encoder) {
lpt_disable_pch_transcoder(dev_priv);
for_each_encoder_on_crtc(dev, crtc, encoder)
if (encoder->post_disable)
encoder->post_disable(encoder);
-
- intel_crtc->active = false;
- intel_update_watermarks(crtc);
-
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
-
- if (intel_crtc_to_shared_dpll(intel_crtc))
- intel_disable_shared_dpll(intel_crtc);
-}
-
-static void ironlake_crtc_off(struct drm_crtc *crtc)
-{
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- intel_put_shared_dpll(intel_crtc);
}
-
static void i9xx_pfit_enable(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
return POWER_DOMAIN_PORT_DDI_C_4_LANES;
case PORT_D:
return POWER_DOMAIN_PORT_DDI_D_4_LANES;
+ case PORT_E:
+ return POWER_DOMAIN_PORT_DDI_E_2_LANES;
default:
- WARN_ON_ONCE(1);
+ MISSING_CASE(port);
return POWER_DOMAIN_PORT_OTHER;
}
}
+static enum intel_display_power_domain port_to_aux_power_domain(enum port port)
+{
+ switch (port) {
+ case PORT_A:
+ return POWER_DOMAIN_AUX_A;
+ case PORT_B:
+ return POWER_DOMAIN_AUX_B;
+ case PORT_C:
+ return POWER_DOMAIN_AUX_C;
+ case PORT_D:
+ return POWER_DOMAIN_AUX_D;
+ case PORT_E:
+ /* FIXME: Check VBT for actual wiring of PORT E */
+ return POWER_DOMAIN_AUX_D;
+ default:
+ MISSING_CASE(port);
+ return POWER_DOMAIN_AUX_A;
+ }
+}
+
#define for_each_power_domain(domain, mask) \
for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++) \
if ((1 << (domain)) & (mask))
}
}
+enum intel_display_power_domain
+intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder)
+{
+ struct drm_device *dev = intel_encoder->base.dev;
+ struct intel_digital_port *intel_dig_port;
+
+ switch (intel_encoder->type) {
+ case INTEL_OUTPUT_UNKNOWN:
+ case INTEL_OUTPUT_HDMI:
+ /*
+ * Only DDI platforms should ever use these output types.
+ * We can get here after the HDMI detect code has already set
+ * the type of the shared encoder. Since we can't be sure
+ * what's the status of the given connectors, play safe and
+ * run the DP detection too.
+ */
+ WARN_ON_ONCE(!HAS_DDI(dev));
+ case INTEL_OUTPUT_DISPLAYPORT:
+ case INTEL_OUTPUT_EDP:
+ intel_dig_port = enc_to_dig_port(&intel_encoder->base);
+ return port_to_aux_power_domain(intel_dig_port->port);
+ case INTEL_OUTPUT_DP_MST:
+ intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
+ return port_to_aux_power_domain(intel_dig_port->port);
+ default:
+ MISSING_CASE(intel_encoder->type);
+ return POWER_DOMAIN_AUX_A;
+ }
+}
+
static unsigned long get_crtc_power_domains(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
unsigned long mask;
enum transcoder transcoder;
+ if (!crtc->state->active)
+ return 0;
+
transcoder = intel_pipe_to_cpu_transcoder(dev->dev_private, pipe);
mask = BIT(POWER_DOMAIN_PIPE(pipe));
return mask;
}
-static void modeset_update_crtc_power_domains(struct drm_atomic_state *state)
+static unsigned long modeset_get_crtc_power_domains(struct drm_crtc *crtc)
{
- struct drm_device *dev = state->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- unsigned long pipe_domains[I915_MAX_PIPES] = { 0, };
- struct intel_crtc *crtc;
+ struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ enum intel_display_power_domain domain;
+ unsigned long domains, new_domains, old_domains;
- /*
- * First get all needed power domains, then put all unneeded, to avoid
- * any unnecessary toggling of the power wells.
- */
- for_each_intel_crtc(dev, crtc) {
- enum intel_display_power_domain domain;
+ old_domains = intel_crtc->enabled_power_domains;
+ intel_crtc->enabled_power_domains = new_domains = get_crtc_power_domains(crtc);
- if (!crtc->base.state->enable)
- continue;
+ domains = new_domains & ~old_domains;
- pipe_domains[crtc->pipe] = get_crtc_power_domains(&crtc->base);
+ for_each_power_domain(domain, domains)
+ intel_display_power_get(dev_priv, domain);
- for_each_power_domain(domain, pipe_domains[crtc->pipe])
- intel_display_power_get(dev_priv, domain);
- }
+ return old_domains & ~new_domains;
+}
- if (dev_priv->display.modeset_global_resources)
- dev_priv->display.modeset_global_resources(state);
+static void modeset_put_power_domains(struct drm_i915_private *dev_priv,
+ unsigned long domains)
+{
+ enum intel_display_power_domain domain;
- for_each_intel_crtc(dev, crtc) {
- enum intel_display_power_domain domain;
+ for_each_power_domain(domain, domains)
+ intel_display_power_put(dev_priv, domain);
+}
- for_each_power_domain(domain, crtc->enabled_power_domains)
- intel_display_power_put(dev_priv, domain);
+static void modeset_update_crtc_power_domains(struct drm_atomic_state *state)
+{
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned long put_domains[I915_MAX_PIPES] = {};
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *crtc;
+ int i;
- crtc->enabled_power_domains = pipe_domains[crtc->pipe];
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (needs_modeset(crtc->state))
+ put_domains[to_intel_crtc(crtc)->pipe] =
+ modeset_get_crtc_power_domains(crtc);
}
- intel_display_set_init_power(dev_priv, false);
+ if (dev_priv->display.modeset_commit_cdclk) {
+ unsigned int cdclk = to_intel_atomic_state(state)->cdclk;
+
+ if (cdclk != dev_priv->cdclk_freq &&
+ !WARN_ON(!state->allow_modeset))
+ dev_priv->display.modeset_commit_cdclk(state);
+ }
+
+ for (i = 0; i < I915_MAX_PIPES; i++)
+ if (put_domains[i])
+ modeset_put_power_domains(dev_priv, put_domains[i]);
}
-/* returns HPLL frequency in kHz */
-static int valleyview_get_vco(struct drm_i915_private *dev_priv)
+static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
{
- int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
+ int max_cdclk_freq = dev_priv->max_cdclk_freq;
- /* Obtain SKU information */
- mutex_lock(&dev_priv->dpio_lock);
- hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
- CCK_FUSE_HPLL_FREQ_MASK;
- mutex_unlock(&dev_priv->dpio_lock);
+ if (INTEL_INFO(dev_priv)->gen >= 9 ||
+ IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
+ return max_cdclk_freq;
+ else if (IS_CHERRYVIEW(dev_priv))
+ return max_cdclk_freq*95/100;
+ else if (INTEL_INFO(dev_priv)->gen < 4)
+ return 2*max_cdclk_freq*90/100;
+ else
+ return max_cdclk_freq*90/100;
+}
- return vco_freq[hpll_freq] * 1000;
+static void intel_update_max_cdclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (IS_SKYLAKE(dev)) {
+ u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
+
+ if (limit == SKL_DFSM_CDCLK_LIMIT_675)
+ dev_priv->max_cdclk_freq = 675000;
+ else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
+ dev_priv->max_cdclk_freq = 540000;
+ else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
+ dev_priv->max_cdclk_freq = 450000;
+ else
+ dev_priv->max_cdclk_freq = 337500;
+ } else if (IS_BROADWELL(dev)) {
+ /*
+ * FIXME with extra cooling we can allow
+ * 540 MHz for ULX and 675 Mhz for ULT.
+ * How can we know if extra cooling is
+ * available? PCI ID, VTB, something else?
+ */
+ if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+ dev_priv->max_cdclk_freq = 450000;
+ else if (IS_BDW_ULX(dev))
+ dev_priv->max_cdclk_freq = 450000;
+ else if (IS_BDW_ULT(dev))
+ dev_priv->max_cdclk_freq = 540000;
+ else
+ dev_priv->max_cdclk_freq = 675000;
+ } else if (IS_CHERRYVIEW(dev)) {
+ dev_priv->max_cdclk_freq = 320000;
+ } else if (IS_VALLEYVIEW(dev)) {
+ dev_priv->max_cdclk_freq = 400000;
+ } else {
+ /* otherwise assume cdclk is fixed */
+ dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
+ }
+
+ dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
+
+ DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
+ dev_priv->max_cdclk_freq);
+
+ DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n",
+ dev_priv->max_dotclk_freq);
}
-static void vlv_update_cdclk(struct drm_device *dev)
+static void intel_update_cdclk(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- dev_priv->vlv_cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
+ dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
- dev_priv->vlv_cdclk_freq);
+ dev_priv->cdclk_freq);
/*
* Program the gmbus_freq based on the cdclk frequency.
* BSpec erroneously claims we should aim for 4MHz, but
* in fact 1MHz is the correct frequency.
*/
- I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->vlv_cdclk_freq, 1000));
+ if (IS_VALLEYVIEW(dev)) {
+ /*
+ * Program the gmbus_freq based on the cdclk frequency.
+ * BSpec erroneously claims we should aim for 4MHz, but
+ * in fact 1MHz is the correct frequency.
+ */
+ I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
+ }
+
+ if (dev_priv->max_cdclk_freq == 0)
+ intel_update_max_cdclk(dev);
}
-/* Adjust CDclk dividers to allow high res or save power if possible */
-static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
+static void broxton_set_cdclk(struct drm_device *dev, int frequency)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 val, cmd;
+ uint32_t divider;
+ uint32_t ratio;
+ uint32_t current_freq;
+ int ret;
- WARN_ON(dev_priv->display.get_display_clock_speed(dev) != dev_priv->vlv_cdclk_freq);
+ /* frequency = 19.2MHz * ratio / 2 / div{1,1.5,2,4} */
+ switch (frequency) {
+ case 144000:
+ divider = BXT_CDCLK_CD2X_DIV_SEL_4;
+ ratio = BXT_DE_PLL_RATIO(60);
+ break;
+ case 288000:
+ divider = BXT_CDCLK_CD2X_DIV_SEL_2;
+ ratio = BXT_DE_PLL_RATIO(60);
+ break;
+ case 384000:
+ divider = BXT_CDCLK_CD2X_DIV_SEL_1_5;
+ ratio = BXT_DE_PLL_RATIO(60);
+ break;
+ case 576000:
+ divider = BXT_CDCLK_CD2X_DIV_SEL_1;
+ ratio = BXT_DE_PLL_RATIO(60);
+ break;
+ case 624000:
+ divider = BXT_CDCLK_CD2X_DIV_SEL_1;
+ ratio = BXT_DE_PLL_RATIO(65);
+ break;
+ case 19200:
+ /*
+ * Bypass frequency with DE PLL disabled. Init ratio, divider
+ * to suppress GCC warning.
+ */
+ ratio = 0;
+ divider = 0;
+ break;
+ default:
+ DRM_ERROR("unsupported CDCLK freq %d", frequency);
- if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
- cmd = 2;
- else if (cdclk == 266667)
- cmd = 1;
- else
- cmd = 0;
+ return;
+ }
mutex_lock(&dev_priv->rps.hw_lock);
- val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
- val &= ~DSPFREQGUAR_MASK;
- val |= (cmd << DSPFREQGUAR_SHIFT);
- vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
- if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
- DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
- 50)) {
- DRM_ERROR("timed out waiting for CDclk change\n");
- }
+ /* Inform power controller of upcoming frequency change */
+ ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
+ 0x80000000);
mutex_unlock(&dev_priv->rps.hw_lock);
- if (cdclk == 400000) {
- u32 divider;
+ if (ret) {
+ DRM_ERROR("PCode CDCLK freq change notify failed (err %d, freq %d)\n",
+ ret, frequency);
+ return;
+ }
- divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
+ current_freq = I915_READ(CDCLK_CTL) & CDCLK_FREQ_DECIMAL_MASK;
+ /* convert from .1 fixpoint MHz with -1MHz offset to kHz */
+ current_freq = current_freq * 500 + 1000;
- mutex_lock(&dev_priv->dpio_lock);
- /* adjust cdclk divider */
- val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
- val &= ~DISPLAY_FREQUENCY_VALUES;
+ /*
+ * DE PLL has to be disabled when
+ * - setting to 19.2MHz (bypass, PLL isn't used)
+ * - before setting to 624MHz (PLL needs toggling)
+ * - before setting to any frequency from 624MHz (PLL needs toggling)
+ */
+ if (frequency == 19200 || frequency == 624000 ||
+ current_freq == 624000) {
+ I915_WRITE(BXT_DE_PLL_ENABLE, ~BXT_DE_PLL_PLL_ENABLE);
+ /* Timeout 200us */
+ if (wait_for(!(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK),
+ 1))
+ DRM_ERROR("timout waiting for DE PLL unlock\n");
+ }
+
+ if (frequency != 19200) {
+ uint32_t val;
+
+ val = I915_READ(BXT_DE_PLL_CTL);
+ val &= ~BXT_DE_PLL_RATIO_MASK;
+ val |= ratio;
+ I915_WRITE(BXT_DE_PLL_CTL, val);
+
+ I915_WRITE(BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE);
+ /* Timeout 200us */
+ if (wait_for(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK, 1))
+ DRM_ERROR("timeout waiting for DE PLL lock\n");
+
+ val = I915_READ(CDCLK_CTL);
+ val &= ~BXT_CDCLK_CD2X_DIV_SEL_MASK;
val |= divider;
- vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
+ /*
+ * Disable SSA Precharge when CD clock frequency < 500 MHz,
+ * enable otherwise.
+ */
+ val &= ~BXT_CDCLK_SSA_PRECHARGE_ENABLE;
+ if (frequency >= 500000)
+ val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
- if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
- DISPLAY_FREQUENCY_STATUS) == (divider << DISPLAY_FREQUENCY_STATUS_SHIFT),
- 50))
- DRM_ERROR("timed out waiting for CDclk change\n");
- mutex_unlock(&dev_priv->dpio_lock);
+ val &= ~CDCLK_FREQ_DECIMAL_MASK;
+ /* convert from kHz to .1 fixpoint MHz with -1MHz offset */
+ val |= (frequency - 1000) / 500;
+ I915_WRITE(CDCLK_CTL, val);
}
- mutex_lock(&dev_priv->dpio_lock);
- /* adjust self-refresh exit latency value */
- val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
- val &= ~0x7f;
+ mutex_lock(&dev_priv->rps.hw_lock);
+ ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
+ DIV_ROUND_UP(frequency, 25000));
+ mutex_unlock(&dev_priv->rps.hw_lock);
- /*
- * For high bandwidth configs, we set a higher latency in the bunit
- * so that the core display fetch happens in time to avoid underruns.
- */
- if (cdclk == 400000)
- val |= 4500 / 250; /* 4.5 usec */
- else
- val |= 3000 / 250; /* 3.0 usec */
- vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
- mutex_unlock(&dev_priv->dpio_lock);
+ if (ret) {
+ DRM_ERROR("PCode CDCLK freq set failed, (err %d, freq %d)\n",
+ ret, frequency);
+ return;
+ }
- vlv_update_cdclk(dev);
+ intel_update_cdclk(dev);
}
-static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
+void broxton_init_cdclk(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 val, cmd;
+ uint32_t val;
- WARN_ON(dev_priv->display.get_display_clock_speed(dev) != dev_priv->vlv_cdclk_freq);
+ /*
+ * NDE_RSTWRN_OPT RST PCH Handshake En must always be 0b on BXT
+ * or else the reset will hang because there is no PCH to respond.
+ * Move the handshake programming to initialization sequence.
+ * Previously was left up to BIOS.
+ */
+ val = I915_READ(HSW_NDE_RSTWRN_OPT);
+ val &= ~RESET_PCH_HANDSHAKE_ENABLE;
+ I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
- switch (cdclk) {
- case 333333:
- case 320000:
- case 266667:
- case 200000:
- break;
- default:
- MISSING_CASE(cdclk);
+ /* Enable PG1 for cdclk */
+ intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
+
+ /* check if cd clock is enabled */
+ if (I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_PLL_ENABLE) {
+ DRM_DEBUG_KMS("Display already initialized\n");
return;
}
/*
- * Specs are full of misinformation, but testing on actual
- * hardware has shown that we just need to write the desired
- * CCK divider into the Punit register.
+ * FIXME:
+ * - The initial CDCLK needs to be read from VBT.
+ * Need to make this change after VBT has changes for BXT.
+ * - check if setting the max (or any) cdclk freq is really necessary
+ * here, it belongs to modeset time
*/
- cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
+ broxton_set_cdclk(dev, 624000);
- mutex_lock(&dev_priv->rps.hw_lock);
- val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
- val &= ~DSPFREQGUAR_MASK_CHV;
- val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
- vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
- if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
- DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
- 50)) {
- DRM_ERROR("timed out waiting for CDclk change\n");
- }
- mutex_unlock(&dev_priv->rps.hw_lock);
+ I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
+ POSTING_READ(DBUF_CTL);
- vlv_update_cdclk(dev);
+ udelay(10);
+
+ if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
+ DRM_ERROR("DBuf power enable timeout!\n");
}
-static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
- int max_pixclk)
+void broxton_uninit_cdclk(struct drm_device *dev)
{
- int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? 333333 : 320000;
- int limit = IS_CHERRYVIEW(dev_priv) ? 95 : 90;
+ struct drm_i915_private *dev_priv = dev->dev_private;
- /*
- * Really only a few cases to deal with, as only 4 CDclks are supported:
- * 200MHz
- * 267MHz
- * 320/333MHz (depends on HPLL freq)
- * 400MHz (VLV only)
- * So we check to see whether we're above 90% (VLV) or 95% (CHV)
- * of the lower bin and adjust if needed.
- *
- * We seem to get an unstable or solid color picture at 200MHz.
- * Not sure what's wrong. For now use 200MHz only when all pipes
- * are off.
- */
- if (!IS_CHERRYVIEW(dev_priv) &&
- max_pixclk > freq_320*limit/100)
- return 400000;
- else if (max_pixclk > 266667*limit/100)
- return freq_320;
- else if (max_pixclk > 0)
- return 266667;
- else
- return 200000;
-}
+ I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
+ POSTING_READ(DBUF_CTL);
-/* compute the max pixel clock for new configuration */
-static int intel_mode_max_pixclk(struct drm_i915_private *dev_priv)
-{
- struct drm_device *dev = dev_priv->dev;
- struct intel_crtc *intel_crtc;
- int max_pixclk = 0;
+ udelay(10);
- for_each_intel_crtc(dev, intel_crtc) {
- if (intel_crtc->new_enabled)
- max_pixclk = max(max_pixclk,
- intel_crtc->new_config->base.adjusted_mode.crtc_clock);
- }
+ if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
+ DRM_ERROR("DBuf power disable timeout!\n");
- return max_pixclk;
+ /* Set minimum (bypass) frequency, in effect turning off the DE PLL */
+ broxton_set_cdclk(dev, 19200);
+
+ intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
}
-static void valleyview_modeset_global_pipes(struct drm_device *dev,
- unsigned *prepare_pipes)
+static const struct skl_cdclk_entry {
+ unsigned int freq;
+ unsigned int vco;
+} skl_cdclk_frequencies[] = {
+ { .freq = 308570, .vco = 8640 },
+ { .freq = 337500, .vco = 8100 },
+ { .freq = 432000, .vco = 8640 },
+ { .freq = 450000, .vco = 8100 },
+ { .freq = 540000, .vco = 8100 },
+ { .freq = 617140, .vco = 8640 },
+ { .freq = 675000, .vco = 8100 },
+};
+
+static unsigned int skl_cdclk_decimal(unsigned int freq)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc;
- int max_pixclk = intel_mode_max_pixclk(dev_priv);
+ return (freq - 1000) / 500;
+}
- if (valleyview_calc_cdclk(dev_priv, max_pixclk) ==
- dev_priv->vlv_cdclk_freq)
- return;
+static unsigned int skl_cdclk_get_vco(unsigned int freq)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(skl_cdclk_frequencies); i++) {
+ const struct skl_cdclk_entry *e = &skl_cdclk_frequencies[i];
+
+ if (e->freq == freq)
+ return e->vco;
+ }
- /* disable/enable all currently active pipes while we change cdclk */
- for_each_intel_crtc(dev, intel_crtc)
- if (intel_crtc->base.state->enable)
- *prepare_pipes |= (1 << intel_crtc->pipe);
+ return 8100;
}
-static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
+static void
+skl_dpll0_enable(struct drm_i915_private *dev_priv, unsigned int required_vco)
{
- unsigned int credits, default_credits;
+ unsigned int min_freq;
+ u32 val;
+
+ /* select the minimum CDCLK before enabling DPLL 0 */
+ val = I915_READ(CDCLK_CTL);
+ val &= ~CDCLK_FREQ_SEL_MASK | ~CDCLK_FREQ_DECIMAL_MASK;
+ val |= CDCLK_FREQ_337_308;
+
+ if (required_vco == 8640)
+ min_freq = 308570;
+ else
+ min_freq = 337500;
+
+ val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_freq);
+
+ I915_WRITE(CDCLK_CTL, val);
+ POSTING_READ(CDCLK_CTL);
+
+ /*
+ * We always enable DPLL0 with the lowest link rate possible, but still
+ * taking into account the VCO required to operate the eDP panel at the
+ * desired frequency. The usual DP link rates operate with a VCO of
+ * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
+ * The modeset code is responsible for the selection of the exact link
+ * rate later on, with the constraint of choosing a frequency that
+ * works with required_vco.
+ */
+ val = I915_READ(DPLL_CTRL1);
+
+ val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
+ DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
+ val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
+ if (required_vco == 8640)
+ val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
+ SKL_DPLL0);
+ else
+ val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
+ SKL_DPLL0);
+
+ I915_WRITE(DPLL_CTRL1, val);
+ POSTING_READ(DPLL_CTRL1);
+
+ I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE);
+
+ if (wait_for(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK, 5))
+ DRM_ERROR("DPLL0 not locked\n");
+}
+
+static bool skl_cdclk_pcu_ready(struct drm_i915_private *dev_priv)
+{
+ int ret;
+ u32 val;
+
+ /* inform PCU we want to change CDCLK */
+ val = SKL_CDCLK_PREPARE_FOR_CHANGE;
+ mutex_lock(&dev_priv->rps.hw_lock);
+ ret = sandybridge_pcode_read(dev_priv, SKL_PCODE_CDCLK_CONTROL, &val);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ return ret == 0 && (val & SKL_CDCLK_READY_FOR_CHANGE);
+}
+
+static bool skl_cdclk_wait_for_pcu_ready(struct drm_i915_private *dev_priv)
+{
+ unsigned int i;
+
+ for (i = 0; i < 15; i++) {
+ if (skl_cdclk_pcu_ready(dev_priv))
+ return true;
+ udelay(10);
+ }
+
+ return false;
+}
+
+static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq)
+{
+ struct drm_device *dev = dev_priv->dev;
+ u32 freq_select, pcu_ack;
+
+ DRM_DEBUG_DRIVER("Changing CDCLK to %dKHz\n", freq);
+
+ if (!skl_cdclk_wait_for_pcu_ready(dev_priv)) {
+ DRM_ERROR("failed to inform PCU about cdclk change\n");
+ return;
+ }
+
+ /* set CDCLK_CTL */
+ switch(freq) {
+ case 450000:
+ case 432000:
+ freq_select = CDCLK_FREQ_450_432;
+ pcu_ack = 1;
+ break;
+ case 540000:
+ freq_select = CDCLK_FREQ_540;
+ pcu_ack = 2;
+ break;
+ case 308570:
+ case 337500:
+ default:
+ freq_select = CDCLK_FREQ_337_308;
+ pcu_ack = 0;
+ break;
+ case 617140:
+ case 675000:
+ freq_select = CDCLK_FREQ_675_617;
+ pcu_ack = 3;
+ break;
+ }
+
+ I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(freq));
+ POSTING_READ(CDCLK_CTL);
+
+ /* inform PCU of the change */
+ mutex_lock(&dev_priv->rps.hw_lock);
+ sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ intel_update_cdclk(dev);
+}
+
+void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
+{
+ /* disable DBUF power */
+ I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
+ POSTING_READ(DBUF_CTL);
+
+ udelay(10);
+
+ if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
+ DRM_ERROR("DBuf power disable timeout\n");
+
+ /*
+ * DMC assumes ownership of LCPLL and will get confused if we touch it.
+ */
+ if (dev_priv->csr.dmc_payload) {
+ /* disable DPLL0 */
+ I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) &
+ ~LCPLL_PLL_ENABLE);
+ if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
+ DRM_ERROR("Couldn't disable DPLL0\n");
+ }
+
+ intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
+}
+
+void skl_init_cdclk(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+ unsigned int required_vco;
+
+ /* enable PCH reset handshake */
+ val = I915_READ(HSW_NDE_RSTWRN_OPT);
+ I915_WRITE(HSW_NDE_RSTWRN_OPT, val | RESET_PCH_HANDSHAKE_ENABLE);
+
+ /* enable PG1 and Misc I/O */
+ intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
+
+ /* DPLL0 not enabled (happens on early BIOS versions) */
+ if (!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE)) {
+ /* enable DPLL0 */
+ required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk);
+ skl_dpll0_enable(dev_priv, required_vco);
+ }
+
+ /* set CDCLK to the frequency the BIOS chose */
+ skl_set_cdclk(dev_priv, dev_priv->skl_boot_cdclk);
+
+ /* enable DBUF power */
+ I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
+ POSTING_READ(DBUF_CTL);
+
+ udelay(10);
+
+ if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
+ DRM_ERROR("DBuf power enable timeout\n");
+}
+
+/* Adjust CDclk dividers to allow high res or save power if possible */
+static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 val, cmd;
+
+ WARN_ON(dev_priv->display.get_display_clock_speed(dev)
+ != dev_priv->cdclk_freq);
+
+ if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
+ cmd = 2;
+ else if (cdclk == 266667)
+ cmd = 1;
+ else
+ cmd = 0;
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+ val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
+ val &= ~DSPFREQGUAR_MASK;
+ val |= (cmd << DSPFREQGUAR_SHIFT);
+ vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
+ if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
+ DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
+ 50)) {
+ DRM_ERROR("timed out waiting for CDclk change\n");
+ }
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ mutex_lock(&dev_priv->sb_lock);
+
+ if (cdclk == 400000) {
+ u32 divider;
+
+ divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
+
+ /* adjust cdclk divider */
+ val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
+ val &= ~CCK_FREQUENCY_VALUES;
+ val |= divider;
+ vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
+
+ if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
+ CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT),
+ 50))
+ DRM_ERROR("timed out waiting for CDclk change\n");
+ }
+
+ /* adjust self-refresh exit latency value */
+ val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
+ val &= ~0x7f;
+
+ /*
+ * For high bandwidth configs, we set a higher latency in the bunit
+ * so that the core display fetch happens in time to avoid underruns.
+ */
+ if (cdclk == 400000)
+ val |= 4500 / 250; /* 4.5 usec */
+ else
+ val |= 3000 / 250; /* 3.0 usec */
+ vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
+
+ mutex_unlock(&dev_priv->sb_lock);
+
+ intel_update_cdclk(dev);
+}
+
+static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 val, cmd;
+
+ WARN_ON(dev_priv->display.get_display_clock_speed(dev)
+ != dev_priv->cdclk_freq);
+
+ switch (cdclk) {
+ case 333333:
+ case 320000:
+ case 266667:
+ case 200000:
+ break;
+ default:
+ MISSING_CASE(cdclk);
+ return;
+ }
+
+ /*
+ * Specs are full of misinformation, but testing on actual
+ * hardware has shown that we just need to write the desired
+ * CCK divider into the Punit register.
+ */
+ cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+ val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
+ val &= ~DSPFREQGUAR_MASK_CHV;
+ val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
+ vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
+ if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
+ DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
+ 50)) {
+ DRM_ERROR("timed out waiting for CDclk change\n");
+ }
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ intel_update_cdclk(dev);
+}
+
+static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
+ int max_pixclk)
+{
+ int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? 333333 : 320000;
+ int limit = IS_CHERRYVIEW(dev_priv) ? 95 : 90;
+
+ /*
+ * Really only a few cases to deal with, as only 4 CDclks are supported:
+ * 200MHz
+ * 267MHz
+ * 320/333MHz (depends on HPLL freq)
+ * 400MHz (VLV only)
+ * So we check to see whether we're above 90% (VLV) or 95% (CHV)
+ * of the lower bin and adjust if needed.
+ *
+ * We seem to get an unstable or solid color picture at 200MHz.
+ * Not sure what's wrong. For now use 200MHz only when all pipes
+ * are off.
+ */
+ if (!IS_CHERRYVIEW(dev_priv) &&
+ max_pixclk > freq_320*limit/100)
+ return 400000;
+ else if (max_pixclk > 266667*limit/100)
+ return freq_320;
+ else if (max_pixclk > 0)
+ return 266667;
+ else
+ return 200000;
+}
+
+static int broxton_calc_cdclk(struct drm_i915_private *dev_priv,
+ int max_pixclk)
+{
+ /*
+ * FIXME:
+ * - remove the guardband, it's not needed on BXT
+ * - set 19.2MHz bypass frequency if there are no active pipes
+ */
+ if (max_pixclk > 576000*9/10)
+ return 624000;
+ else if (max_pixclk > 384000*9/10)
+ return 576000;
+ else if (max_pixclk > 288000*9/10)
+ return 384000;
+ else if (max_pixclk > 144000*9/10)
+ return 288000;
+ else
+ return 144000;
+}
+
+/* Compute the max pixel clock for new configuration. Uses atomic state if
+ * that's non-NULL, look at current state otherwise. */
+static int intel_mode_max_pixclk(struct drm_device *dev,
+ struct drm_atomic_state *state)
+{
+ struct intel_crtc *intel_crtc;
+ struct intel_crtc_state *crtc_state;
+ int max_pixclk = 0;
+
+ for_each_intel_crtc(dev, intel_crtc) {
+ crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+
+ if (!crtc_state->base.enable)
+ continue;
+
+ max_pixclk = max(max_pixclk,
+ crtc_state->base.adjusted_mode.crtc_clock);
+ }
+
+ return max_pixclk;
+}
+
+static int valleyview_modeset_calc_cdclk(struct drm_atomic_state *state)
+{
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int max_pixclk = intel_mode_max_pixclk(dev, state);
+
+ if (max_pixclk < 0)
+ return max_pixclk;
+
+ to_intel_atomic_state(state)->cdclk =
+ valleyview_calc_cdclk(dev_priv, max_pixclk);
+
+ return 0;
+}
+
+static int broxton_modeset_calc_cdclk(struct drm_atomic_state *state)
+{
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int max_pixclk = intel_mode_max_pixclk(dev, state);
+
+ if (max_pixclk < 0)
+ return max_pixclk;
+
+ to_intel_atomic_state(state)->cdclk =
+ broxton_calc_cdclk(dev_priv, max_pixclk);
+
+ return 0;
+}
+
+static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
+{
+ unsigned int credits, default_credits;
if (IS_CHERRYVIEW(dev_priv))
default_credits = PFI_CREDIT(12);
else
default_credits = PFI_CREDIT(8);
- if (DIV_ROUND_CLOSEST(dev_priv->vlv_cdclk_freq, 1000) >= dev_priv->rps.cz_freq) {
+ if (dev_priv->cdclk_freq >= dev_priv->czclk_freq) {
/* CHV suggested value is 31 or 63 */
if (IS_CHERRYVIEW(dev_priv))
- credits = PFI_CREDIT_31;
+ credits = PFI_CREDIT_63;
else
credits = PFI_CREDIT(15);
} else {
WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND);
}
-static void valleyview_modeset_global_resources(struct drm_atomic_state *state)
+static void valleyview_modeset_commit_cdclk(struct drm_atomic_state *old_state)
{
- struct drm_device *dev = state->dev;
+ struct drm_device *dev = old_state->dev;
+ unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
struct drm_i915_private *dev_priv = dev->dev_private;
- int max_pixclk = intel_mode_max_pixclk(dev_priv);
- int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk);
- if (req_cdclk != dev_priv->vlv_cdclk_freq) {
- /*
- * FIXME: We can end up here with all power domains off, yet
- * with a CDCLK frequency other than the minimum. To account
- * for this take the PIPE-A power domain, which covers the HW
- * blocks needed for the following programming. This can be
- * removed once it's guaranteed that we get here either with
- * the minimum CDCLK set, or the required power domains
- * enabled.
- */
- intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
+ /*
+ * FIXME: We can end up here with all power domains off, yet
+ * with a CDCLK frequency other than the minimum. To account
+ * for this take the PIPE-A power domain, which covers the HW
+ * blocks needed for the following programming. This can be
+ * removed once it's guaranteed that we get here either with
+ * the minimum CDCLK set, or the required power domains
+ * enabled.
+ */
+ intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
- if (IS_CHERRYVIEW(dev))
- cherryview_set_cdclk(dev, req_cdclk);
- else
- valleyview_set_cdclk(dev, req_cdclk);
+ if (IS_CHERRYVIEW(dev))
+ cherryview_set_cdclk(dev, req_cdclk);
+ else
+ valleyview_set_cdclk(dev, req_cdclk);
- vlv_program_pfi_credits(dev_priv);
+ vlv_program_pfi_credits(dev_priv);
- intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
- }
+ intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
}
static void valleyview_crtc_enable(struct drm_crtc *crtc)
int pipe = intel_crtc->pipe;
bool is_dsi;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
- if (!is_dsi) {
- if (IS_CHERRYVIEW(dev))
- chv_prepare_pll(intel_crtc, intel_crtc->config);
- else
- vlv_prepare_pll(intel_crtc, intel_crtc->config);
- }
-
if (intel_crtc->config->has_dp_encoder)
intel_dp_set_m_n(intel_crtc, M1_N1);
encoder->pre_pll_enable(encoder);
if (!is_dsi) {
- if (IS_CHERRYVIEW(dev))
+ if (IS_CHERRYVIEW(dev)) {
+ chv_prepare_pll(intel_crtc, intel_crtc->config);
chv_enable_pll(intel_crtc, intel_crtc->config);
- else
+ } else {
+ vlv_prepare_pll(intel_crtc, intel_crtc->config);
vlv_enable_pll(intel_crtc, intel_crtc->config);
+ }
}
for_each_encoder_on_crtc(dev, crtc, encoder)
intel_crtc_load_lut(crtc);
- intel_update_watermarks(crtc);
intel_enable_pipe(intel_crtc);
assert_vblank_disabled(crtc);
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->enable(encoder);
-
- intel_crtc_enable_planes(crtc);
-
- /* Underruns don't raise interrupts, so check manually. */
- i9xx_check_fifo_underruns(dev_priv);
}
static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
i9xx_set_pll_dividers(intel_crtc);
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->enable(encoder);
-
- intel_crtc_enable_planes(crtc);
-
- /*
- * Gen2 reports pipe underruns whenever all planes are disabled.
- * So don't enable underrun reporting before at least some planes
- * are enabled.
- * FIXME: Need to fix the logic to work when we turn off all planes
- * but leave the pipe running.
- */
- if (IS_GEN2(dev))
- intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
-
- /* Underruns don't raise interrupts, so check manually. */
- i9xx_check_fifo_underruns(dev_priv);
}
static void i9xx_pfit_disable(struct intel_crtc *crtc)
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- if (!intel_crtc->active)
- return;
-
- /*
- * Gen2 reports pipe underruns whenever all planes are disabled.
- * So diasble underrun reporting before all the planes get disabled.
- * FIXME: Need to fix the logic to work when we turn off all planes
- * but leave the pipe running.
- */
- if (IS_GEN2(dev))
- intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
-
- /*
- * Vblank time updates from the shadow to live plane control register
- * are blocked if the memory self-refresh mode is active at that
- * moment. So to make sure the plane gets truly disabled, disable
- * first the self-refresh mode. The self-refresh enable bit in turn
- * will be checked/applied by the HW only at the next frame start
- * event which is after the vblank start event, so we need to have a
- * wait-for-vblank between disabling the plane and the pipe.
- */
- intel_set_memory_cxsr(dev_priv, false);
- intel_crtc_disable_planes(crtc);
-
/*
* On gen2 planes are double buffered but the pipe isn't, so we must
* wait for planes to fully turn off before disabling the pipe.
i9xx_disable_pll(intel_crtc);
}
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ if (encoder->post_pll_disable)
+ encoder->post_pll_disable(encoder);
+
if (!IS_GEN2(dev))
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
-
- intel_crtc->active = false;
- intel_update_watermarks(crtc);
-
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
-}
-
-static void i9xx_crtc_off(struct drm_crtc *crtc)
-{
}
-/* Master function to enable/disable CRTC and corresponding power wells */
-void intel_crtc_control(struct drm_crtc *crtc, bool enable)
+static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->dev);
enum intel_display_power_domain domain;
unsigned long domains;
- if (enable) {
- if (!intel_crtc->active) {
- domains = get_crtc_power_domains(crtc);
- for_each_power_domain(domain, domains)
- intel_display_power_get(dev_priv, domain);
- intel_crtc->enabled_power_domains = domains;
+ if (!intel_crtc->active)
+ return;
- dev_priv->display.crtc_enable(crtc);
- }
- } else {
- if (intel_crtc->active) {
- dev_priv->display.crtc_disable(crtc);
+ if (to_intel_plane_state(crtc->primary->state)->visible) {
+ intel_crtc_wait_for_pending_flips(crtc);
+ intel_pre_disable_primary(crtc);
- domains = intel_crtc->enabled_power_domains;
- for_each_power_domain(domain, domains)
- intel_display_power_put(dev_priv, domain);
- intel_crtc->enabled_power_domains = 0;
- }
+ intel_crtc_disable_planes(crtc, 1 << drm_plane_index(crtc->primary));
+ to_intel_plane_state(crtc->primary->state)->visible = false;
}
+
+ dev_priv->display.crtc_disable(crtc);
+ intel_crtc->active = false;
+ intel_update_watermarks(crtc);
+ intel_disable_shared_dpll(intel_crtc);
+
+ domains = intel_crtc->enabled_power_domains;
+ for_each_power_domain(domain, domains)
+ intel_display_power_put(dev_priv, domain);
+ intel_crtc->enabled_power_domains = 0;
}
-/**
- * Sets the power management mode of the pipe and plane.
+/*
+ * turn all crtc's off, but do not adjust state
+ * This has to be paired with a call to intel_modeset_setup_hw_state.
*/
-void intel_crtc_update_dpms(struct drm_crtc *crtc)
+int intel_display_suspend(struct drm_device *dev)
{
- struct drm_device *dev = crtc->dev;
- struct intel_encoder *intel_encoder;
- bool enable = false;
-
- for_each_encoder_on_crtc(dev, crtc, intel_encoder)
- enable |= intel_encoder->connectors_active;
+ struct drm_mode_config *config = &dev->mode_config;
+ struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx;
+ struct drm_atomic_state *state;
+ struct drm_crtc *crtc;
+ unsigned crtc_mask = 0;
+ int ret = 0;
- intel_crtc_control(crtc, enable);
-}
+ if (WARN_ON(!ctx))
+ return 0;
-static void intel_crtc_disable(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_connector *connector;
- struct drm_i915_private *dev_priv = dev->dev_private;
+ lockdep_assert_held(&ctx->ww_ctx);
+ state = drm_atomic_state_alloc(dev);
+ if (WARN_ON(!state))
+ return -ENOMEM;
- /* crtc should still be enabled when we disable it. */
- WARN_ON(!crtc->state->enable);
+ state->acquire_ctx = ctx;
+ state->allow_modeset = true;
- dev_priv->display.crtc_disable(crtc);
- dev_priv->display.off(crtc);
+ for_each_crtc(dev, crtc) {
+ struct drm_crtc_state *crtc_state =
+ drm_atomic_get_crtc_state(state, crtc);
- crtc->primary->funcs->disable_plane(crtc->primary);
+ ret = PTR_ERR_OR_ZERO(crtc_state);
+ if (ret)
+ goto free;
- /* Update computed state. */
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (!connector->encoder || !connector->encoder->crtc)
+ if (!crtc_state->active)
continue;
- if (connector->encoder->crtc != crtc)
- continue;
+ crtc_state->active = false;
+ crtc_mask |= 1 << drm_crtc_index(crtc);
+ }
- connector->dpms = DRM_MODE_DPMS_OFF;
- to_intel_encoder(connector->encoder)->connectors_active = false;
+ if (crtc_mask) {
+ ret = drm_atomic_commit(state);
+
+ if (!ret) {
+ for_each_crtc(dev, crtc)
+ if (crtc_mask & (1 << drm_crtc_index(crtc)))
+ crtc->state->active = true;
+
+ return ret;
+ }
}
+
+free:
+ if (ret)
+ DRM_ERROR("Suspending crtc's failed with %i\n", ret);
+ drm_atomic_state_free(state);
+ return ret;
}
void intel_encoder_destroy(struct drm_encoder *encoder)
kfree(intel_encoder);
}
-/* Simple dpms helper for encoders with just one connector, no cloning and only
- * one kind of off state. It clamps all !ON modes to fully OFF and changes the
- * state of the entire output pipe. */
-static void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
-{
- if (mode == DRM_MODE_DPMS_ON) {
- encoder->connectors_active = true;
-
- intel_crtc_update_dpms(encoder->base.crtc);
- } else {
- encoder->connectors_active = false;
-
- intel_crtc_update_dpms(encoder->base.crtc);
- }
-}
-
/* Cross check the actual hw state with our own modeset state tracking (and it's
* internal consistency). */
static void intel_connector_check_state(struct intel_connector *connector)
{
+ struct drm_crtc *crtc = connector->base.state->crtc;
+
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
+ connector->base.base.id,
+ connector->base.name);
+
if (connector->get_hw_state(connector)) {
struct intel_encoder *encoder = connector->encoder;
- struct drm_crtc *crtc;
- bool encoder_enabled;
- enum pipe pipe;
+ struct drm_connector_state *conn_state = connector->base.state;
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
- connector->base.base.id,
- connector->base.name);
+ I915_STATE_WARN(!crtc,
+ "connector enabled without attached crtc\n");
- /* there is no real hw state for MST connectors */
- if (connector->mst_port)
+ if (!crtc)
return;
- I915_STATE_WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
- "wrong connector dpms state\n");
- I915_STATE_WARN(connector->base.encoder != &encoder->base,
- "active connector not linked to encoder\n");
-
- if (encoder) {
- I915_STATE_WARN(!encoder->connectors_active,
- "encoder->connectors_active not set\n");
+ I915_STATE_WARN(!crtc->state->active,
+ "connector is active, but attached crtc isn't\n");
- encoder_enabled = encoder->get_hw_state(encoder, &pipe);
- I915_STATE_WARN(!encoder_enabled, "encoder not enabled\n");
- if (I915_STATE_WARN_ON(!encoder->base.crtc))
- return;
+ if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST)
+ return;
- crtc = encoder->base.crtc;
+ I915_STATE_WARN(conn_state->best_encoder != &encoder->base,
+ "atomic encoder doesn't match attached encoder\n");
- I915_STATE_WARN(!crtc->state->enable,
- "crtc not enabled\n");
- I915_STATE_WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
- I915_STATE_WARN(pipe != to_intel_crtc(crtc)->pipe,
- "encoder active on the wrong pipe\n");
- }
+ I915_STATE_WARN(conn_state->crtc != encoder->base.crtc,
+ "attached encoder crtc differs from connector crtc\n");
+ } else {
+ I915_STATE_WARN(crtc && crtc->state->active,
+ "attached crtc is active, but connector isn't\n");
+ I915_STATE_WARN(!crtc && connector->base.state->best_encoder,
+ "best encoder set without crtc!\n");
}
}
return connector;
}
-/* Even simpler default implementation, if there's really no special case to
- * consider. */
-void intel_connector_dpms(struct drm_connector *connector, int mode)
-{
- /* All the simple cases only support two dpms states. */
- if (mode != DRM_MODE_DPMS_ON)
- mode = DRM_MODE_DPMS_OFF;
-
- if (mode == connector->dpms)
- return;
-
- connector->dpms = mode;
-
- /* Only need to change hw state when actually enabled */
- if (connector->encoder)
- intel_encoder_dpms(to_intel_encoder(connector->encoder), mode);
-
- intel_modeset_check_state(connector->dev);
-}
-
/* Simple connector->get_hw_state implementation for encoders that support only
* one connector and no cloning and hence the encoder state determines the state
* of the connector. */
return encoder->get_hw_state(encoder, &pipe);
}
-static int pipe_required_fdi_lanes(struct drm_device *dev, enum pipe pipe)
+static int pipe_required_fdi_lanes(struct intel_crtc_state *crtc_state)
{
- struct intel_crtc *crtc =
- to_intel_crtc(intel_get_crtc_for_pipe(dev, pipe));
-
- if (crtc->base.state->enable &&
- crtc->config->has_pch_encoder)
- return crtc->config->fdi_lanes;
+ if (crtc_state->base.enable && crtc_state->has_pch_encoder)
+ return crtc_state->fdi_lanes;
return 0;
}
-static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
+static int ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
struct intel_crtc_state *pipe_config)
{
+ struct drm_atomic_state *state = pipe_config->base.state;
+ struct intel_crtc *other_crtc;
+ struct intel_crtc_state *other_crtc_state;
+
DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
pipe_name(pipe), pipe_config->fdi_lanes);
if (pipe_config->fdi_lanes > 4) {
DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
pipe_name(pipe), pipe_config->fdi_lanes);
- return false;
+ return -EINVAL;
}
if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
if (pipe_config->fdi_lanes > 2) {
DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
pipe_config->fdi_lanes);
- return false;
+ return -EINVAL;
} else {
- return true;
+ return 0;
}
}
if (INTEL_INFO(dev)->num_pipes == 2)
- return true;
+ return 0;
/* Ivybridge 3 pipe is really complicated */
switch (pipe) {
case PIPE_A:
- return true;
+ return 0;
case PIPE_B:
- if (pipe_config->fdi_lanes > 2 &&
- pipe_required_fdi_lanes(dev, PIPE_C) > 0) {
+ if (pipe_config->fdi_lanes <= 2)
+ return 0;
+
+ other_crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, PIPE_C));
+ other_crtc_state =
+ intel_atomic_get_crtc_state(state, other_crtc);
+ if (IS_ERR(other_crtc_state))
+ return PTR_ERR(other_crtc_state);
+
+ if (pipe_required_fdi_lanes(other_crtc_state) > 0) {
DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
pipe_name(pipe), pipe_config->fdi_lanes);
- return false;
+ return -EINVAL;
}
- return true;
+ return 0;
case PIPE_C:
if (pipe_config->fdi_lanes > 2) {
DRM_DEBUG_KMS("only 2 lanes on pipe %c: required %i lanes\n",
pipe_name(pipe), pipe_config->fdi_lanes);
- return false;
+ return -EINVAL;
}
- if (pipe_required_fdi_lanes(dev, PIPE_B) > 2) {
+
+ other_crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, PIPE_B));
+ other_crtc_state =
+ intel_atomic_get_crtc_state(state, other_crtc);
+ if (IS_ERR(other_crtc_state))
+ return PTR_ERR(other_crtc_state);
+
+ if (pipe_required_fdi_lanes(other_crtc_state) > 2) {
DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
- return false;
+ return -EINVAL;
}
- return true;
+ return 0;
default:
BUG();
}
struct intel_crtc_state *pipe_config)
{
struct drm_device *dev = intel_crtc->base.dev;
- struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
- int lane, link_bw, fdi_dotclock;
- bool setup_ok, needs_recompute = false;
+ const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
+ int lane, link_bw, fdi_dotclock, ret;
+ bool needs_recompute = false;
retry:
/* FDI is a binary signal running at ~2.7GHz, encoding
intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
link_bw, &pipe_config->fdi_m_n);
- setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev,
- intel_crtc->pipe, pipe_config);
- if (!setup_ok && pipe_config->pipe_bpp > 6*3) {
+ ret = ironlake_check_fdi_lanes(intel_crtc->base.dev,
+ intel_crtc->pipe, pipe_config);
+ if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
pipe_config->pipe_bpp -= 2*3;
DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
pipe_config->pipe_bpp);
if (needs_recompute)
return RETRY;
- return setup_ok ? 0 : -EINVAL;
+ return ret;
+}
+
+static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
+ struct intel_crtc_state *pipe_config)
+{
+ if (pipe_config->pipe_bpp > 24)
+ return false;
+
+ /* HSW can handle pixel rate up to cdclk? */
+ if (IS_HASWELL(dev_priv->dev))
+ return true;
+
+ /*
+ * We compare against max which means we must take
+ * the increased cdclk requirement into account when
+ * calculating the new cdclk.
+ *
+ * Should measure whether using a lower cdclk w/o IPS
+ */
+ return ilk_pipe_pixel_rate(pipe_config) <=
+ dev_priv->max_cdclk_freq * 95 / 100;
}
static void hsw_compute_ips_config(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
pipe_config->ips_enabled = i915.enable_ips &&
- hsw_crtc_supports_ips(crtc) &&
- pipe_config->pipe_bpp <= 24;
+ hsw_crtc_supports_ips(crtc) &&
+ pipe_config_supports_ips(dev_priv, pipe_config);
}
static int intel_crtc_compute_config(struct intel_crtc *crtc,
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
+ const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
/* FIXME should check pixel clock limits on all platforms */
if (INTEL_INFO(dev)->gen < 4) {
- int clock_limit =
- dev_priv->display.get_display_clock_speed(dev);
+ int clock_limit = dev_priv->max_cdclk_freq;
/*
* Enable pixel doubling when the dot clock
* WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
*/
if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
- adjusted_mode->hsync_start == adjusted_mode->hdisplay)
+ adjusted_mode->crtc_hsync_start == adjusted_mode->crtc_hdisplay)
return -EINVAL;
- if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && pipe_config->pipe_bpp > 10*3) {
- pipe_config->pipe_bpp = 10*3; /* 12bpc is gen5+ */
- } else if (INTEL_INFO(dev)->gen <= 4 && pipe_config->pipe_bpp > 8*3) {
- /* only a 8bpc pipe, with 6bpc dither through the panel fitter
- * for lvds. */
- pipe_config->pipe_bpp = 8*3;
- }
-
if (HAS_IPS(dev))
hsw_compute_ips_config(crtc, pipe_config);
return 0;
}
-static int valleyview_get_display_clock_speed(struct drm_device *dev)
+static int skylake_get_display_clock_speed(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ uint32_t lcpll1 = I915_READ(LCPLL1_CTL);
+ uint32_t cdctl = I915_READ(CDCLK_CTL);
+ uint32_t linkrate;
+
+ if (!(lcpll1 & LCPLL_PLL_ENABLE))
+ return 24000; /* 24MHz is the cd freq with NSSC ref */
+
+ if ((cdctl & CDCLK_FREQ_SEL_MASK) == CDCLK_FREQ_540)
+ return 540000;
+
+ linkrate = (I915_READ(DPLL_CTRL1) &
+ DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) >> 1;
+
+ if (linkrate == DPLL_CTRL1_LINK_RATE_2160 ||
+ linkrate == DPLL_CTRL1_LINK_RATE_1080) {
+ /* vco 8640 */
+ switch (cdctl & CDCLK_FREQ_SEL_MASK) {
+ case CDCLK_FREQ_450_432:
+ return 432000;
+ case CDCLK_FREQ_337_308:
+ return 308570;
+ case CDCLK_FREQ_675_617:
+ return 617140;
+ default:
+ WARN(1, "Unknown cd freq selection\n");
+ }
+ } else {
+ /* vco 8100 */
+ switch (cdctl & CDCLK_FREQ_SEL_MASK) {
+ case CDCLK_FREQ_450_432:
+ return 450000;
+ case CDCLK_FREQ_337_308:
+ return 337500;
+ case CDCLK_FREQ_675_617:
+ return 675000;
+ default:
+ WARN(1, "Unknown cd freq selection\n");
+ }
+ }
+
+ /* error case, do as if DPLL0 isn't enabled */
+ return 24000;
+}
+
+static int broxton_get_display_clock_speed(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ uint32_t cdctl = I915_READ(CDCLK_CTL);
+ uint32_t pll_ratio = I915_READ(BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
+ uint32_t pll_enab = I915_READ(BXT_DE_PLL_ENABLE);
+ int cdclk;
+
+ if (!(pll_enab & BXT_DE_PLL_PLL_ENABLE))
+ return 19200;
+
+ cdclk = 19200 * pll_ratio / 2;
+
+ switch (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) {
+ case BXT_CDCLK_CD2X_DIV_SEL_1:
+ return cdclk; /* 576MHz or 624MHz */
+ case BXT_CDCLK_CD2X_DIV_SEL_1_5:
+ return cdclk * 2 / 3; /* 384MHz */
+ case BXT_CDCLK_CD2X_DIV_SEL_2:
+ return cdclk / 2; /* 288MHz */
+ case BXT_CDCLK_CD2X_DIV_SEL_4:
+ return cdclk / 4; /* 144MHz */
+ }
+
+ /* error case, do as if DE PLL isn't enabled */
+ return 19200;
+}
+
+static int broadwell_get_display_clock_speed(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 val;
- int divider;
+ uint32_t lcpll = I915_READ(LCPLL_CTL);
+ uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
- if (dev_priv->hpll_freq == 0)
- dev_priv->hpll_freq = valleyview_get_vco(dev_priv);
+ if (lcpll & LCPLL_CD_SOURCE_FCLK)
+ return 800000;
+ else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+ return 450000;
+ else if (freq == LCPLL_CLK_FREQ_450)
+ return 450000;
+ else if (freq == LCPLL_CLK_FREQ_54O_BDW)
+ return 540000;
+ else if (freq == LCPLL_CLK_FREQ_337_5_BDW)
+ return 337500;
+ else
+ return 675000;
+}
- mutex_lock(&dev_priv->dpio_lock);
- val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
- mutex_unlock(&dev_priv->dpio_lock);
+static int haswell_get_display_clock_speed(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t lcpll = I915_READ(LCPLL_CTL);
+ uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
- divider = val & DISPLAY_FREQUENCY_VALUES;
+ if (lcpll & LCPLL_CD_SOURCE_FCLK)
+ return 800000;
+ else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+ return 450000;
+ else if (freq == LCPLL_CLK_FREQ_450)
+ return 450000;
+ else if (IS_HSW_ULT(dev))
+ return 337500;
+ else
+ return 540000;
+}
- WARN((val & DISPLAY_FREQUENCY_STATUS) !=
- (divider << DISPLAY_FREQUENCY_STATUS_SHIFT),
- "cdclk change in progress\n");
+static int valleyview_get_display_clock_speed(struct drm_device *dev)
+{
+ return vlv_get_cck_clock_hpll(to_i915(dev), "cdclk",
+ CCK_DISPLAY_CLOCK_CONTROL);
+}
- return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, divider + 1);
+static int ilk_get_display_clock_speed(struct drm_device *dev)
+{
+ return 450000;
}
static int i945_get_display_clock_speed(struct drm_device *dev)
static int i915_get_display_clock_speed(struct drm_device *dev)
{
- return 333000;
+ return 333333;
}
static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
case GC_DISPLAY_CLOCK_267_MHZ_PNV:
- return 267000;
+ return 266667;
case GC_DISPLAY_CLOCK_333_MHZ_PNV:
- return 333000;
+ return 333333;
case GC_DISPLAY_CLOCK_444_MHZ_PNV:
- return 444000;
+ return 444444;
case GC_DISPLAY_CLOCK_200_MHZ_PNV:
return 200000;
default:
DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc);
case GC_DISPLAY_CLOCK_133_MHZ_PNV:
- return 133000;
+ return 133333;
case GC_DISPLAY_CLOCK_167_MHZ_PNV:
- return 167000;
+ return 166667;
}
}
pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
- return 133000;
+ return 133333;
else {
switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
case GC_DISPLAY_CLOCK_333_MHZ:
- return 333000;
+ return 333333;
default:
case GC_DISPLAY_CLOCK_190_200_MHZ:
return 190000;
static int i865_get_display_clock_speed(struct drm_device *dev)
{
- return 266000;
+ return 266667;
}
-static int i855_get_display_clock_speed(struct drm_device *dev)
+static int i85x_get_display_clock_speed(struct drm_device *dev)
{
u16 hpllcc = 0;
+
+ /*
+ * 852GM/852GMV only supports 133 MHz and the HPLLCC
+ * encoding is different :(
+ * FIXME is this the right way to detect 852GM/852GMV?
+ */
+ if (dev->pdev->revision == 0x1)
+ return 133333;
+
+ pci_bus_read_config_word(dev->pdev->bus,
+ PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
+
/* Assume that the hardware is in the high speed state. This
* should be the default.
*/
switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
case GC_CLOCK_133_200:
+ case GC_CLOCK_133_200_2:
case GC_CLOCK_100_200:
return 200000;
case GC_CLOCK_166_250:
return 250000;
case GC_CLOCK_100_133:
- return 133000;
+ return 133333;
+ case GC_CLOCK_133_266:
+ case GC_CLOCK_133_266_2:
+ case GC_CLOCK_166_266:
+ return 266667;
}
/* Shouldn't happen */
static int i830_get_display_clock_speed(struct drm_device *dev)
{
- return 133000;
+ return 133333;
+}
+
+static unsigned int intel_hpll_vco(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ static const unsigned int blb_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 4800000,
+ [4] = 6400000,
+ };
+ static const unsigned int pnv_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 4800000,
+ [4] = 2666667,
+ };
+ static const unsigned int cl_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 6400000,
+ [4] = 3333333,
+ [5] = 3566667,
+ [6] = 4266667,
+ };
+ static const unsigned int elk_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 4800000,
+ };
+ static const unsigned int ctg_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 6400000,
+ [4] = 2666667,
+ [5] = 4266667,
+ };
+ const unsigned int *vco_table;
+ unsigned int vco;
+ uint8_t tmp = 0;
+
+ /* FIXME other chipsets? */
+ if (IS_GM45(dev))
+ vco_table = ctg_vco;
+ else if (IS_G4X(dev))
+ vco_table = elk_vco;
+ else if (IS_CRESTLINE(dev))
+ vco_table = cl_vco;
+ else if (IS_PINEVIEW(dev))
+ vco_table = pnv_vco;
+ else if (IS_G33(dev))
+ vco_table = blb_vco;
+ else
+ return 0;
+
+ tmp = I915_READ(IS_MOBILE(dev) ? HPLLVCO_MOBILE : HPLLVCO);
+
+ vco = vco_table[tmp & 0x7];
+ if (vco == 0)
+ DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp);
+ else
+ DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco);
+
+ return vco;
+}
+
+static int gm45_get_display_clock_speed(struct drm_device *dev)
+{
+ unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
+ uint16_t tmp = 0;
+
+ pci_read_config_word(dev->pdev, GCFGC, &tmp);
+
+ cdclk_sel = (tmp >> 12) & 0x1;
+
+ switch (vco) {
+ case 2666667:
+ case 4000000:
+ case 5333333:
+ return cdclk_sel ? 333333 : 222222;
+ case 3200000:
+ return cdclk_sel ? 320000 : 228571;
+ default:
+ DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", vco, tmp);
+ return 222222;
+ }
+}
+
+static int i965gm_get_display_clock_speed(struct drm_device *dev)
+{
+ static const uint8_t div_3200[] = { 16, 10, 8 };
+ static const uint8_t div_4000[] = { 20, 12, 10 };
+ static const uint8_t div_5333[] = { 24, 16, 14 };
+ const uint8_t *div_table;
+ unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
+ uint16_t tmp = 0;
+
+ pci_read_config_word(dev->pdev, GCFGC, &tmp);
+
+ cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
+
+ if (cdclk_sel >= ARRAY_SIZE(div_3200))
+ goto fail;
+
+ switch (vco) {
+ case 3200000:
+ div_table = div_3200;
+ break;
+ case 4000000:
+ div_table = div_4000;
+ break;
+ case 5333333:
+ div_table = div_5333;
+ break;
+ default:
+ goto fail;
+ }
+
+ return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
+
+fail:
+ DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", vco, tmp);
+ return 200000;
+}
+
+static int g33_get_display_clock_speed(struct drm_device *dev)
+{
+ static const uint8_t div_3200[] = { 12, 10, 8, 7, 5, 16 };
+ static const uint8_t div_4000[] = { 14, 12, 10, 8, 6, 20 };
+ static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 };
+ static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 };
+ const uint8_t *div_table;
+ unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
+ uint16_t tmp = 0;
+
+ pci_read_config_word(dev->pdev, GCFGC, &tmp);
+
+ cdclk_sel = (tmp >> 4) & 0x7;
+
+ if (cdclk_sel >= ARRAY_SIZE(div_3200))
+ goto fail;
+
+ switch (vco) {
+ case 3200000:
+ div_table = div_3200;
+ break;
+ case 4000000:
+ div_table = div_4000;
+ break;
+ case 4800000:
+ div_table = div_4800;
+ break;
+ case 5333333:
+ div_table = div_5333;
+ break;
+ default:
+ goto fail;
+ }
+
+ return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
+
+fail:
+ DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", vco, tmp);
+ return 190476;
}
static void
WARN_ON(!crtc_state->base.state);
- if (IS_VALLEYVIEW(dev)) {
+ if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
refclk = 100000;
} else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
intel_cpu_transcoder_set_m_n(crtc, dp_m_n, dp_m2_n2);
}
-static void vlv_update_pll(struct intel_crtc *crtc,
- struct intel_crtc_state *pipe_config)
+static void vlv_compute_dpll(struct intel_crtc *crtc,
+ struct intel_crtc_state *pipe_config)
{
u32 dpll, dpll_md;
* clock for pipe B, since VGA hotplug / manual detection depends
* on it.
*/
- dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
- DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
+ dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REF_CLK_ENABLE_VLV |
+ DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_REF_CLK_VLV;
/* We should never disable this, set it here for state tracking */
if (crtc->pipe == PIPE_B)
dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
u32 bestn, bestm1, bestm2, bestp1, bestp2;
u32 coreclk, reg_val;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
bestn = pipe_config->dpll.n;
bestm1 = pipe_config->dpll.m1;
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
}
-static void chv_update_pll(struct intel_crtc *crtc,
- struct intel_crtc_state *pipe_config)
+static void chv_compute_dpll(struct intel_crtc *crtc,
+ struct intel_crtc_state *pipe_config)
{
- pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLOCK_CHV |
- DPLL_REFA_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
+ pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
+ DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
DPLL_VCO_ENABLE;
if (crtc->pipe != PIPE_A)
pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
I915_WRITE(dpll_reg,
pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
/* p1 and p2 divider */
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
1 << DPIO_CHV_N_DIV_SHIFT);
/* M2 fraction division */
- if (bestm2_frac)
- vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
/* M2 fraction division enable */
dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
DPIO_AFC_RECAL);
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
}
/**
};
if (IS_CHERRYVIEW(dev)) {
- chv_update_pll(crtc, &pipe_config);
+ chv_compute_dpll(crtc, &pipe_config);
chv_prepare_pll(crtc, &pipe_config);
chv_enable_pll(crtc, &pipe_config);
} else {
- vlv_update_pll(crtc, &pipe_config);
+ vlv_compute_dpll(crtc, &pipe_config);
vlv_prepare_pll(crtc, &pipe_config);
vlv_enable_pll(crtc, &pipe_config);
}
vlv_disable_pll(to_i915(dev), pipe);
}
-static void i9xx_update_pll(struct intel_crtc *crtc,
- struct intel_crtc_state *crtc_state,
- intel_clock_t *reduced_clock,
- int num_connectors)
+static void i9xx_compute_dpll(struct intel_crtc *crtc,
+ struct intel_crtc_state *crtc_state,
+ intel_clock_t *reduced_clock,
+ int num_connectors)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
}
}
-static void i8xx_update_pll(struct intel_crtc *crtc,
- struct intel_crtc_state *crtc_state,
- intel_clock_t *reduced_clock,
- int num_connectors)
+static void i8xx_compute_dpll(struct intel_crtc *crtc,
+ struct intel_crtc_state *crtc_state,
+ intel_clock_t *reduced_clock,
+ int num_connectors)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe = intel_crtc->pipe;
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
- struct drm_display_mode *adjusted_mode =
- &intel_crtc->config->base.adjusted_mode;
+ const struct drm_display_mode *adjusted_mode = &intel_crtc->config->base.adjusted_mode;
uint32_t crtc_vtotal, crtc_vblank_end;
int vsyncshift = 0;
mode->vsync_end = pipe_config->base.adjusted_mode.crtc_vsync_end;
mode->flags = pipe_config->base.adjusted_mode.flags;
+ mode->type = DRM_MODE_TYPE_DRIVER;
mode->clock = pipe_config->base.adjusted_mode.crtc_clock;
mode->flags |= pipe_config->base.adjusted_mode.flags;
+
+ mode->hsync = drm_mode_hsync(mode);
+ mode->vrefresh = drm_mode_vrefresh(mode);
+ drm_mode_set_name(mode);
}
static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int refclk, num_connectors = 0;
- intel_clock_t clock, reduced_clock;
- bool ok, has_reduced_clock = false;
- bool is_lvds = false, is_dsi = false;
+ intel_clock_t clock;
+ bool ok;
+ bool is_dsi = false;
struct intel_encoder *encoder;
const intel_limit_t *limit;
struct drm_atomic_state *state = crtc_state->base.state;
+ struct drm_connector *connector;
struct drm_connector_state *connector_state;
int i;
- for (i = 0; i < state->num_connector; i++) {
- if (!state->connectors[i])
- continue;
+ memset(&crtc_state->dpll_hw_state, 0,
+ sizeof(crtc_state->dpll_hw_state));
- connector_state = state->connector_states[i];
+ for_each_connector_in_state(state, connector, connector_state, i) {
if (connector_state->crtc != &crtc->base)
continue;
encoder = to_intel_encoder(connector_state->best_encoder);
switch (encoder->type) {
- case INTEL_OUTPUT_LVDS:
- is_lvds = true;
- break;
case INTEL_OUTPUT_DSI:
is_dsi = true;
break;
return -EINVAL;
}
- if (is_lvds && dev_priv->lvds_downclock_avail) {
- /*
- * Ensure we match the reduced clock's P to the target
- * clock. If the clocks don't match, we can't switch
- * the display clock by using the FP0/FP1. In such case
- * we will disable the LVDS downclock feature.
- */
- has_reduced_clock =
- dev_priv->display.find_dpll(limit, crtc_state,
- dev_priv->lvds_downclock,
- refclk, &clock,
- &reduced_clock);
- }
/* Compat-code for transition, will disappear. */
crtc_state->dpll.n = clock.n;
crtc_state->dpll.m1 = clock.m1;
}
if (IS_GEN2(dev)) {
- i8xx_update_pll(crtc, crtc_state,
- has_reduced_clock ? &reduced_clock : NULL,
- num_connectors);
+ i8xx_compute_dpll(crtc, crtc_state, NULL,
+ num_connectors);
} else if (IS_CHERRYVIEW(dev)) {
- chv_update_pll(crtc, crtc_state);
+ chv_compute_dpll(crtc, crtc_state);
} else if (IS_VALLEYVIEW(dev)) {
- vlv_update_pll(crtc, crtc_state);
+ vlv_compute_dpll(crtc, crtc_state);
} else {
- i9xx_update_pll(crtc, crtc_state,
- has_reduced_clock ? &reduced_clock : NULL,
- num_connectors);
+ i9xx_compute_dpll(crtc, crtc_state, NULL,
+ num_connectors);
}
return 0;
if (!(pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE))
return;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
clock.m2 = mdiv & DPIO_M2DIV_MASK;
clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
- vlv_clock(refclk, &clock);
-
- /* clock.dot is the fast clock */
- pipe_config->port_clock = clock.dot / 5;
+ pipe_config->port_clock = vlv_calc_dpll_params(refclk, &clock);
}
static void
int pipe = pipe_config->cpu_transcoder;
enum dpio_channel port = vlv_pipe_to_channel(pipe);
intel_clock_t clock;
- u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2;
+ u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3;
int refclk = 100000;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
- mutex_unlock(&dev_priv->dpio_lock);
+ pll_dw3 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
+ mutex_unlock(&dev_priv->sb_lock);
clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
- clock.m2 = ((pll_dw0 & 0xff) << 22) | (pll_dw2 & 0x3fffff);
+ clock.m2 = (pll_dw0 & 0xff) << 22;
+ if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN)
+ clock.m2 |= pll_dw2 & 0x3fffff;
clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
- chv_clock(refclk, &clock);
-
- /* clock.dot is the fast clock */
- pipe_config->port_clock = clock.dot / 5;
+ pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
}
static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
else
i9xx_crtc_clock_get(crtc, pipe_config);
+ /*
+ * Normally the dotclock is filled in by the encoder .get_config()
+ * but in case the pipe is enabled w/o any ports we need a sane
+ * default.
+ */
+ pipe_config->base.adjusted_mode.crtc_clock =
+ pipe_config->port_clock / pipe_config->pixel_multiplier;
+
return true;
}
if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
with_spread = true;
- if (WARN(dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE &&
- with_fdi, "LP PCH doesn't have FDI\n"))
+ if (WARN(HAS_PCH_LPT_LP(dev) && with_fdi, "LP PCH doesn't have FDI\n"))
with_fdi = false;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
tmp &= ~SBI_SSCCTL_DISABLE;
}
}
- reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
- SBI_GEN0 : SBI_DBUFF0;
+ reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
}
/* Sequence to disable CLKOUT_DP */
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t reg, tmp;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
- reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
- SBI_GEN0 : SBI_DBUFF0;
+ reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
}
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
}
static void lpt_init_pch_refclk(struct drm_device *dev)
struct drm_device *dev = crtc_state->base.crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_atomic_state *state = crtc_state->base.state;
+ struct drm_connector *connector;
struct drm_connector_state *connector_state;
struct intel_encoder *encoder;
int num_connectors = 0, i;
bool is_lvds = false;
- for (i = 0; i < state->num_connector; i++) {
- if (!state->connectors[i])
- continue;
-
- connector_state = state->connector_states[i];
+ for_each_connector_in_state(state, connector, connector_state, i) {
if (connector_state->crtc != crtc_state->base.crtc)
continue;
struct drm_i915_private *dev_priv = dev->dev_private;
int refclk;
const intel_limit_t *limit;
- bool ret, is_lvds = false;
-
- is_lvds = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS);
+ bool ret;
refclk = ironlake_get_refclk(crtc_state);
if (!ret)
return false;
- if (is_lvds && dev_priv->lvds_downclock_avail) {
- /*
- * Ensure we match the reduced clock's P to the target clock.
- * If the clocks don't match, we can't switch the display clock
- * by using the FP0/FP1. In such case we will disable the LVDS
- * downclock feature.
- */
- *has_reduced_clock =
- dev_priv->display.find_dpll(limit, crtc_state,
- dev_priv->lvds_downclock,
- refclk, clock,
- reduced_clock);
- }
-
return true;
}
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_atomic_state *state = crtc_state->base.state;
+ struct drm_connector *connector;
struct drm_connector_state *connector_state;
struct intel_encoder *encoder;
uint32_t dpll;
int factor, num_connectors = 0, i;
bool is_lvds = false, is_sdvo = false;
- for (i = 0; i < state->num_connector; i++) {
- if (!state->connectors[i])
- continue;
-
- connector_state = state->connector_states[i];
+ for_each_connector_in_state(state, connector, connector_state, i) {
if (connector_state->crtc != crtc_state->base.crtc)
continue;
bool is_lvds = false;
struct intel_shared_dpll *pll;
+ memset(&crtc_state->dpll_hw_state, 0,
+ sizeof(crtc_state->dpll_hw_state));
+
is_lvds = intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS);
WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t tmp;
+ struct intel_crtc_scaler_state *scaler_state = &pipe_config->scaler_state;
+ uint32_t ps_ctrl = 0;
+ int id = -1;
+ int i;
- tmp = I915_READ(PS_CTL(crtc->pipe));
+ /* find scaler attached to this pipe */
+ for (i = 0; i < crtc->num_scalers; i++) {
+ ps_ctrl = I915_READ(SKL_PS_CTRL(crtc->pipe, i));
+ if (ps_ctrl & PS_SCALER_EN && !(ps_ctrl & PS_PLANE_SEL_MASK)) {
+ id = i;
+ pipe_config->pch_pfit.enabled = true;
+ pipe_config->pch_pfit.pos = I915_READ(SKL_PS_WIN_POS(crtc->pipe, i));
+ pipe_config->pch_pfit.size = I915_READ(SKL_PS_WIN_SZ(crtc->pipe, i));
+ break;
+ }
+ }
- if (tmp & PS_ENABLE) {
- pipe_config->pch_pfit.enabled = true;
- pipe_config->pch_pfit.pos = I915_READ(PS_WIN_POS(crtc->pipe));
- pipe_config->pch_pfit.size = I915_READ(PS_WIN_SZ(crtc->pipe));
+ scaler_state->scaler_id = id;
+ if (id >= 0) {
+ scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
+ } else {
+ scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
}
}
}
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+ intel_update_cdclk(dev_priv->dev);
}
/*
DRM_DEBUG_KMS("Enabling package C8+\n");
- if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+ if (HAS_PCH_LPT_LP(dev)) {
val = I915_READ(SOUTH_DSPCLK_GATE_D);
val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
hsw_restore_lcpll(dev_priv);
lpt_init_pch_refclk(dev);
- if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+ if (HAS_PCH_LPT_LP(dev)) {
val = I915_READ(SOUTH_DSPCLK_GATE_D);
val |= PCH_LP_PARTITION_LEVEL_DISABLE;
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
intel_prepare_ddi(dev);
}
+static void broxton_modeset_commit_cdclk(struct drm_atomic_state *old_state)
+{
+ struct drm_device *dev = old_state->dev;
+ unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
+
+ broxton_set_cdclk(dev, req_cdclk);
+}
+
+/* compute the max rate for new configuration */
+static int ilk_max_pixel_rate(struct drm_atomic_state *state)
+{
+ struct intel_crtc *intel_crtc;
+ struct intel_crtc_state *crtc_state;
+ int max_pixel_rate = 0;
+
+ for_each_intel_crtc(state->dev, intel_crtc) {
+ int pixel_rate;
+
+ crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+
+ if (!crtc_state->base.enable)
+ continue;
+
+ pixel_rate = ilk_pipe_pixel_rate(crtc_state);
+
+ /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+ if (IS_BROADWELL(state->dev) && crtc_state->ips_enabled)
+ pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+ max_pixel_rate = max(max_pixel_rate, pixel_rate);
+ }
+
+ return max_pixel_rate;
+}
+
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t val, data;
+ int ret;
+
+ if (WARN((I915_READ(LCPLL_CTL) &
+ (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+ LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+ LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+ LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+ "trying to change cdclk frequency with cdclk not enabled\n"))
+ return;
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+ ret = sandybridge_pcode_write(dev_priv,
+ BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+ if (ret) {
+ DRM_ERROR("failed to inform pcode about cdclk change\n");
+ return;
+ }
+
+ val = I915_READ(LCPLL_CTL);
+ val |= LCPLL_CD_SOURCE_FCLK;
+ I915_WRITE(LCPLL_CTL, val);
+
+ if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE, 1))
+ DRM_ERROR("Switching to FCLK failed\n");
+
+ val = I915_READ(LCPLL_CTL);
+ val &= ~LCPLL_CLK_FREQ_MASK;
+
+ switch (cdclk) {
+ case 450000:
+ val |= LCPLL_CLK_FREQ_450;
+ data = 0;
+ break;
+ case 540000:
+ val |= LCPLL_CLK_FREQ_54O_BDW;
+ data = 1;
+ break;
+ case 337500:
+ val |= LCPLL_CLK_FREQ_337_5_BDW;
+ data = 2;
+ break;
+ case 675000:
+ val |= LCPLL_CLK_FREQ_675_BDW;
+ data = 3;
+ break;
+ default:
+ WARN(1, "invalid cdclk frequency\n");
+ return;
+ }
+
+ I915_WRITE(LCPLL_CTL, val);
+
+ val = I915_READ(LCPLL_CTL);
+ val &= ~LCPLL_CD_SOURCE_FCLK;
+ I915_WRITE(LCPLL_CTL, val);
+
+ if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+ DRM_ERROR("Switching back to LCPLL failed\n");
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+ sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ intel_update_cdclk(dev);
+
+ WARN(cdclk != dev_priv->cdclk_freq,
+ "cdclk requested %d kHz but got %d kHz\n",
+ cdclk, dev_priv->cdclk_freq);
+}
+
+static int broadwell_modeset_calc_cdclk(struct drm_atomic_state *state)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ int max_pixclk = ilk_max_pixel_rate(state);
+ int cdclk;
+
+ /*
+ * FIXME should also account for plane ratio
+ * once 64bpp pixel formats are supported.
+ */
+ if (max_pixclk > 540000)
+ cdclk = 675000;
+ else if (max_pixclk > 450000)
+ cdclk = 540000;
+ else if (max_pixclk > 337500)
+ cdclk = 450000;
+ else
+ cdclk = 337500;
+
+ /*
+ * FIXME move the cdclk caclulation to
+ * compute_config() so we can fail gracegully.
+ */
+ if (cdclk > dev_priv->max_cdclk_freq) {
+ DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+ cdclk, dev_priv->max_cdclk_freq);
+ cdclk = dev_priv->max_cdclk_freq;
+ }
+
+ to_intel_atomic_state(state)->cdclk = cdclk;
+
+ return 0;
+}
+
+static void broadwell_modeset_commit_cdclk(struct drm_atomic_state *old_state)
+{
+ struct drm_device *dev = old_state->dev;
+ unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
+
+ broadwell_set_cdclk(dev, req_cdclk);
+}
+
static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
return 0;
}
+static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,
+ enum port port,
+ struct intel_crtc_state *pipe_config)
+{
+ switch (port) {
+ case PORT_A:
+ pipe_config->ddi_pll_sel = SKL_DPLL0;
+ pipe_config->shared_dpll = DPLL_ID_SKL_DPLL1;
+ break;
+ case PORT_B:
+ pipe_config->ddi_pll_sel = SKL_DPLL1;
+ pipe_config->shared_dpll = DPLL_ID_SKL_DPLL2;
+ break;
+ case PORT_C:
+ pipe_config->ddi_pll_sel = SKL_DPLL2;
+ pipe_config->shared_dpll = DPLL_ID_SKL_DPLL3;
+ break;
+ default:
+ DRM_ERROR("Incorrect port type\n");
+ }
+}
+
static void skylake_get_ddi_pll(struct drm_i915_private *dev_priv,
enum port port,
struct intel_crtc_state *pipe_config)
case PORT_CLK_SEL_WRPLL2:
pipe_config->shared_dpll = DPLL_ID_WRPLL2;
break;
+ case PORT_CLK_SEL_SPLL:
+ pipe_config->shared_dpll = DPLL_ID_SPLL;
}
}
if (IS_SKYLAKE(dev))
skylake_get_ddi_pll(dev_priv, port, pipe_config);
+ else if (IS_BROXTON(dev))
+ bxt_get_ddi_pll(dev_priv, port, pipe_config);
else
haswell_get_ddi_pll(dev_priv, port, pipe_config);
intel_get_pipe_timings(crtc, pipe_config);
+ if (INTEL_INFO(dev)->gen >= 9) {
+ skl_init_scalers(dev, crtc, pipe_config);
+ }
+
pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
+
+ if (INTEL_INFO(dev)->gen >= 9) {
+ pipe_config->scaler_state.scaler_id = -1;
+ pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
+ }
+
if (intel_display_power_is_enabled(dev_priv, pfit_domain)) {
- if (IS_SKYLAKE(dev))
+ if (INTEL_INFO(dev)->gen >= 9)
skylake_get_pfit_config(crtc, pipe_config);
else
ironlake_get_pfit_config(crtc, pipe_config);
return true;
}
-static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
+static void i845_update_cursor(struct drm_crtc *crtc, u32 base, bool on)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t cntl = 0, size = 0;
- if (base) {
+ if (on) {
unsigned int width = intel_crtc->base.cursor->state->crtc_w;
unsigned int height = intel_crtc->base.cursor->state->crtc_h;
unsigned int stride = roundup_pow_of_two(width) * 4;
/* On these chipsets we can only modify the base/size/stride
* whilst the cursor is disabled.
*/
- I915_WRITE(_CURACNTR, 0);
- POSTING_READ(_CURACNTR);
+ I915_WRITE(CURCNTR(PIPE_A), 0);
+ POSTING_READ(CURCNTR(PIPE_A));
intel_crtc->cursor_cntl = 0;
}
if (intel_crtc->cursor_base != base) {
- I915_WRITE(_CURABASE, base);
+ I915_WRITE(CURBASE(PIPE_A), base);
intel_crtc->cursor_base = base;
}
}
if (intel_crtc->cursor_cntl != cntl) {
- I915_WRITE(_CURACNTR, cntl);
- POSTING_READ(_CURACNTR);
+ I915_WRITE(CURCNTR(PIPE_A), cntl);
+ POSTING_READ(CURCNTR(PIPE_A));
intel_crtc->cursor_cntl = cntl;
}
}
-static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
+static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base, bool on)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- uint32_t cntl;
+ uint32_t cntl = 0;
- cntl = 0;
- if (base) {
+ if (on) {
cntl = MCURSOR_GAMMA_ENABLE;
switch (intel_crtc->base.cursor->state->crtc_w) {
case 64:
}
cntl |= pipe << 28; /* Connect to correct pipe */
- if (IS_HASWELL(dev) || IS_BROADWELL(dev))
+ if (HAS_DDI(dev))
cntl |= CURSOR_PIPE_CSC_ENABLE;
}
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- int x = crtc->cursor_x;
- int y = crtc->cursor_y;
+ struct drm_plane_state *cursor_state = crtc->cursor->state;
+ int x = cursor_state->crtc_x;
+ int y = cursor_state->crtc_y;
u32 base = 0, pos = 0;
- if (on)
- base = intel_crtc->cursor_addr;
+ base = intel_crtc->cursor_addr;
if (x >= intel_crtc->config->pipe_src_w)
- base = 0;
+ on = false;
if (y >= intel_crtc->config->pipe_src_h)
- base = 0;
+ on = false;
if (x < 0) {
- if (x + intel_crtc->base.cursor->state->crtc_w <= 0)
- base = 0;
+ if (x + cursor_state->crtc_w <= 0)
+ on = false;
pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
x = -x;
pos |= x << CURSOR_X_SHIFT;
if (y < 0) {
- if (y + intel_crtc->base.cursor->state->crtc_h <= 0)
- base = 0;
+ if (y + cursor_state->crtc_h <= 0)
+ on = false;
pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
y = -y;
}
pos |= y << CURSOR_Y_SHIFT;
- if (base == 0 && intel_crtc->cursor_base == 0)
- return;
-
I915_WRITE(CURPOS(pipe), pos);
/* ILK+ do this automagically */
if (HAS_GMCH_DISPLAY(dev) &&
crtc->cursor->state->rotation == BIT(DRM_ROTATE_180)) {
- base += (intel_crtc->base.cursor->state->crtc_h *
- intel_crtc->base.cursor->state->crtc_w - 1) * 4;
+ base += (cursor_state->crtc_h *
+ cursor_state->crtc_w - 1) * 4;
}
if (IS_845G(dev) || IS_I865G(dev))
- i845_update_cursor(crtc, base);
+ i845_update_cursor(crtc, base, on);
else
- i9xx_update_cursor(crtc, base);
+ i9xx_update_cursor(crtc, base, on);
}
static bool cursor_size_ok(struct drm_device *dev,
mode_fits_in_fbdev(struct drm_device *dev,
struct drm_display_mode *mode)
{
-#ifdef CONFIG_DRM_I915_FBDEV
+#ifdef CONFIG_DRM_FBDEV_EMULATION
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj;
struct drm_framebuffer *fb;
#endif
}
+static int intel_modeset_setup_plane_state(struct drm_atomic_state *state,
+ struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_framebuffer *fb,
+ int x, int y)
+{
+ struct drm_plane_state *plane_state;
+ int hdisplay, vdisplay;
+ int ret;
+
+ plane_state = drm_atomic_get_plane_state(state, crtc->primary);
+ if (IS_ERR(plane_state))
+ return PTR_ERR(plane_state);
+
+ if (mode)
+ drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
+ else
+ hdisplay = vdisplay = 0;
+
+ ret = drm_atomic_set_crtc_for_plane(plane_state, fb ? crtc : NULL);
+ if (ret)
+ return ret;
+ drm_atomic_set_fb_for_plane(plane_state, fb);
+ plane_state->crtc_x = 0;
+ plane_state->crtc_y = 0;
+ plane_state->crtc_w = hdisplay;
+ plane_state->crtc_h = vdisplay;
+ plane_state->src_x = x << 16;
+ plane_state->src_y = y << 16;
+ plane_state->src_w = hdisplay << 16;
+ plane_state->src_h = vdisplay << 16;
+
+ return 0;
+}
+
bool intel_get_load_detect_pipe(struct drm_connector *connector,
struct drm_display_mode *mode,
struct intel_load_detect_pipe *old,
struct drm_mode_config *config = &dev->mode_config;
struct drm_atomic_state *state = NULL;
struct drm_connector_state *connector_state;
+ struct intel_crtc_state *crtc_state;
int ret, i = -1;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
retry:
ret = drm_modeset_lock(&config->connection_mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
/*
* Algorithm gets a little messy:
ret = drm_modeset_lock(&crtc->mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
old->dpms_mode = connector->dpms;
old->load_detect_temp = false;
continue;
if (possible_crtc->state->enable)
continue;
- /* This can occur when applying the pipe A quirk on resume. */
- if (to_intel_crtc(possible_crtc)->new_enabled)
- continue;
crtc = possible_crtc;
break;
*/
if (!crtc) {
DRM_DEBUG_KMS("no pipe available for load-detect\n");
- goto fail_unlock;
+ goto fail;
}
ret = drm_modeset_lock(&crtc->mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
if (ret)
- goto fail_unlock;
- intel_encoder->new_crtc = to_intel_crtc(crtc);
- to_intel_connector(connector)->new_encoder = intel_encoder;
+ goto fail;
intel_crtc = to_intel_crtc(crtc);
- intel_crtc->new_enabled = true;
- intel_crtc->new_config = intel_crtc->config;
old->dpms_mode = connector->dpms;
old->load_detect_temp = true;
old->release_fb = NULL;
connector_state->crtc = crtc;
connector_state->best_encoder = &intel_encoder->base;
+ crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
+ if (IS_ERR(crtc_state)) {
+ ret = PTR_ERR(crtc_state);
+ goto fail;
+ }
+
+ crtc_state->base.active = crtc_state->base.enable = true;
+
if (!mode)
mode = &load_detect_mode;
goto fail;
}
- if (intel_set_mode(crtc, mode, 0, 0, fb, state)) {
+ ret = intel_modeset_setup_plane_state(state, crtc, mode, fb, 0, 0);
+ if (ret)
+ goto fail;
+
+ drm_mode_copy(&crtc_state->base.mode, mode);
+
+ if (drm_atomic_commit(state)) {
DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
if (old->release_fb)
old->release_fb->funcs->destroy(old->release_fb);
intel_wait_for_vblank(dev, intel_crtc->pipe);
return true;
- fail:
- intel_crtc->new_enabled = crtc->state->enable;
- if (intel_crtc->new_enabled)
- intel_crtc->new_config = intel_crtc->config;
- else
- intel_crtc->new_config = NULL;
-fail_unlock:
- if (state) {
- drm_atomic_state_free(state);
- state = NULL;
- }
+fail:
+ drm_atomic_state_free(state);
+ state = NULL;
if (ret == -EDEADLK) {
drm_modeset_backoff(ctx);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct drm_atomic_state *state;
struct drm_connector_state *connector_state;
+ struct intel_crtc_state *crtc_state;
+ int ret;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
connector->base.id, connector->name,
if (IS_ERR(connector_state))
goto fail;
- to_intel_connector(connector)->new_encoder = NULL;
- intel_encoder->new_crtc = NULL;
- intel_crtc->new_enabled = false;
- intel_crtc->new_config = NULL;
+ crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
+ if (IS_ERR(crtc_state))
+ goto fail;
connector_state->best_encoder = NULL;
connector_state->crtc = NULL;
- intel_set_mode(crtc, NULL, 0, 0, NULL, state);
+ crtc_state->base.enable = crtc_state->base.active = false;
- drm_atomic_state_free(state);
+ ret = intel_modeset_setup_plane_state(state, crtc, NULL, NULL,
+ 0, 0);
+ if (ret)
+ goto fail;
+
+ ret = drm_atomic_commit(state);
+ if (ret)
+ goto fail;
if (old->release_fb) {
drm_framebuffer_unregister_private(old->release_fb);
u32 dpll = pipe_config->dpll_hw_state.dpll;
u32 fp;
intel_clock_t clock;
+ int port_clock;
int refclk = i9xx_pll_refclk(dev, pipe_config);
if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
}
if (IS_PINEVIEW(dev))
- pineview_clock(refclk, &clock);
+ port_clock = pnv_calc_dpll_params(refclk, &clock);
else
- i9xx_clock(refclk, &clock);
+ port_clock = i9xx_calc_dpll_params(refclk, &clock);
} else {
u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
clock.p2 = 2;
}
- i9xx_clock(refclk, &clock);
+ port_clock = i9xx_calc_dpll_params(refclk, &clock);
}
/*
* port_clock to compute adjusted_mode.crtc_clock in the
* encoder's get_config() function.
*/
- pipe_config->port_clock = clock.dot;
+ pipe_config->port_clock = port_clock;
}
int intel_dotclock_calculate(int link_freq,
return mode;
}
-static void intel_decrease_pllclock(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
- if (!HAS_GMCH_DISPLAY(dev))
- return;
-
- if (!dev_priv->lvds_downclock_avail)
- return;
-
- /*
- * Since this is called by a timer, we should never get here in
- * the manual case.
- */
- if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
- int pipe = intel_crtc->pipe;
- int dpll_reg = DPLL(pipe);
- int dpll;
-
- DRM_DEBUG_DRIVER("downclocking LVDS\n");
-
- assert_panel_unlocked(dev_priv, pipe);
-
- dpll = I915_READ(dpll_reg);
- dpll |= DISPLAY_RATE_SELECT_FPA1;
- I915_WRITE(dpll_reg, dpll);
- intel_wait_for_vblank(dev, pipe);
- dpll = I915_READ(dpll_reg);
- if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
- DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
- }
-
-}
-
void intel_mark_busy(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
void intel_mark_idle(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc;
if (!dev_priv->mm.busy)
return;
dev_priv->mm.busy = false;
- for_each_crtc(dev, crtc) {
- if (!crtc->primary->fb)
- continue;
-
- intel_decrease_pllclock(crtc);
- }
-
if (INTEL_INFO(dev)->gen >= 6)
gen6_rps_idle(dev->dev_private);
intel_runtime_pm_put(dev_priv);
}
-static void intel_crtc_set_state(struct intel_crtc *crtc,
- struct intel_crtc_state *crtc_state)
-{
- kfree(crtc->config);
- crtc->config = crtc_state;
- crtc->base.state = &crtc_state->base;
-}
-
static void intel_crtc_destroy(struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
kfree(work);
}
- intel_crtc_set_state(intel_crtc, NULL);
drm_crtc_cleanup(crtc);
kfree(intel_crtc);
{
struct intel_unpin_work *work =
container_of(__work, struct intel_unpin_work, work);
- struct drm_device *dev = work->crtc->dev;
- enum pipe pipe = to_intel_crtc(work->crtc)->pipe;
+ struct intel_crtc *crtc = to_intel_crtc(work->crtc);
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_plane *primary = crtc->base.primary;
mutex_lock(&dev->struct_mutex);
- intel_unpin_fb_obj(work->old_fb, work->crtc->primary->state);
+ intel_unpin_fb_obj(work->old_fb, primary->state);
drm_gem_object_unreference(&work->pending_flip_obj->base);
- intel_fbc_update(dev);
-
if (work->flip_queued_req)
i915_gem_request_assign(&work->flip_queued_req, NULL);
mutex_unlock(&dev->struct_mutex);
- intel_frontbuffer_flip_complete(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
+ intel_frontbuffer_flip_complete(dev, to_intel_plane(primary)->frontbuffer_bit);
drm_framebuffer_unreference(work->old_fb);
- BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0);
- atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count);
+ BUG_ON(atomic_read(&crtc->unpin_work_count) == 0);
+ atomic_dec(&crtc->unpin_work_count);
kfree(work);
}
*/
return (I915_READ(DSPSURFLIVE(crtc->plane)) & ~0xfff) ==
crtc->unpin_work->gtt_offset &&
- g4x_flip_count_after_eq(I915_READ(PIPE_FLIPCOUNT_GM45(crtc->pipe)),
+ g4x_flip_count_after_eq(I915_READ(PIPE_FLIPCOUNT_G4X(crtc->pipe)),
crtc->unpin_work->flip_count);
}
spin_unlock_irqrestore(&dev->event_lock, flags);
}
-static inline void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
+static inline void intel_mark_page_flip_active(struct intel_unpin_work *work)
{
/* Ensure that the work item is consistent when activating it ... */
smp_wmb();
- atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING);
+ atomic_set(&work->pending, INTEL_FLIP_PENDING);
/* and that it is marked active as soon as the irq could fire. */
smp_wmb();
}
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
- struct intel_engine_cs *ring,
+ struct drm_i915_gem_request *req,
uint32_t flags)
{
+ struct intel_engine_cs *ring = req->ring;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
u32 flip_mask;
int ret;
- ret = intel_ring_begin(ring, 6);
+ ret = intel_ring_begin(req, 6);
if (ret)
return ret;
intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
intel_ring_emit(ring, 0); /* aux display base address, unused */
- intel_mark_page_flip_active(intel_crtc);
- __intel_ring_advance(ring);
+ intel_mark_page_flip_active(intel_crtc->unpin_work);
return 0;
}
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
- struct intel_engine_cs *ring,
+ struct drm_i915_gem_request *req,
uint32_t flags)
{
+ struct intel_engine_cs *ring = req->ring;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
u32 flip_mask;
int ret;
- ret = intel_ring_begin(ring, 6);
+ ret = intel_ring_begin(req, 6);
if (ret)
return ret;
intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
intel_ring_emit(ring, MI_NOOP);
- intel_mark_page_flip_active(intel_crtc);
- __intel_ring_advance(ring);
+ intel_mark_page_flip_active(intel_crtc->unpin_work);
return 0;
}
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
- struct intel_engine_cs *ring,
+ struct drm_i915_gem_request *req,
uint32_t flags)
{
+ struct intel_engine_cs *ring = req->ring;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t pf, pipesrc;
int ret;
- ret = intel_ring_begin(ring, 4);
+ ret = intel_ring_begin(req, 4);
if (ret)
return ret;
pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
intel_ring_emit(ring, pf | pipesrc);
- intel_mark_page_flip_active(intel_crtc);
- __intel_ring_advance(ring);
+ intel_mark_page_flip_active(intel_crtc->unpin_work);
return 0;
}
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
- struct intel_engine_cs *ring,
+ struct drm_i915_gem_request *req,
uint32_t flags)
{
+ struct intel_engine_cs *ring = req->ring;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t pf, pipesrc;
int ret;
- ret = intel_ring_begin(ring, 4);
+ ret = intel_ring_begin(req, 4);
if (ret)
return ret;
pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
intel_ring_emit(ring, pf | pipesrc);
- intel_mark_page_flip_active(intel_crtc);
- __intel_ring_advance(ring);
+ intel_mark_page_flip_active(intel_crtc->unpin_work);
return 0;
}
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
- struct intel_engine_cs *ring,
+ struct drm_i915_gem_request *req,
uint32_t flags)
{
+ struct intel_engine_cs *ring = req->ring;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t plane_bit = 0;
int len, ret;
* then do the cacheline alignment, and finally emit the
* MI_DISPLAY_FLIP.
*/
- ret = intel_ring_cacheline_align(ring);
+ ret = intel_ring_cacheline_align(req);
if (ret)
return ret;
- ret = intel_ring_begin(ring, len);
+ ret = intel_ring_begin(req, len);
if (ret)
return ret;
DERRMR_PIPEB_PRI_FLIP_DONE |
DERRMR_PIPEC_PRI_FLIP_DONE));
if (IS_GEN8(dev))
- intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8(1) |
+ intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8 |
MI_SRM_LRM_GLOBAL_GTT);
else
- intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) |
+ intel_ring_emit(ring, MI_STORE_REGISTER_MEM |
MI_SRM_LRM_GLOBAL_GTT);
intel_ring_emit(ring, DERRMR);
intel_ring_emit(ring, ring->scratch.gtt_offset + 256);
intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
intel_ring_emit(ring, (MI_NOOP));
- intel_mark_page_flip_active(intel_crtc);
- __intel_ring_advance(ring);
+ intel_mark_page_flip_active(intel_crtc->unpin_work);
return 0;
}
else if (i915.enable_execlists)
return true;
else
- return ring != i915_gem_request_get_ring(obj->last_read_req);
+ return ring != i915_gem_request_get_ring(obj->last_write_req);
}
-static void skl_do_mmio_flip(struct intel_crtc *intel_crtc)
+static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
+ struct intel_unpin_work *work)
{
struct drm_device *dev = intel_crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_framebuffer *fb = intel_crtc->base.primary->fb;
- struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
- struct drm_i915_gem_object *obj = intel_fb->obj;
const enum pipe pipe = intel_crtc->pipe;
u32 ctl, stride;
ctl = I915_READ(PLANE_CTL(pipe, 0));
ctl &= ~PLANE_CTL_TILED_MASK;
- if (obj->tiling_mode == I915_TILING_X)
+ switch (fb->modifier[0]) {
+ case DRM_FORMAT_MOD_NONE:
+ break;
+ case I915_FORMAT_MOD_X_TILED:
ctl |= PLANE_CTL_TILED_X;
+ break;
+ case I915_FORMAT_MOD_Y_TILED:
+ ctl |= PLANE_CTL_TILED_Y;
+ break;
+ case I915_FORMAT_MOD_Yf_TILED:
+ ctl |= PLANE_CTL_TILED_YF;
+ break;
+ default:
+ MISSING_CASE(fb->modifier[0]);
+ }
/*
* The stride is either expressed as a multiple of 64 bytes chunks for
* linear buffers or in number of tiles for tiled buffers.
*/
- stride = fb->pitches[0] >> 6;
- if (obj->tiling_mode == I915_TILING_X)
- stride = fb->pitches[0] >> 9; /* X tiles are 512 bytes wide */
+ stride = fb->pitches[0] /
+ intel_fb_stride_alignment(dev, fb->modifier[0],
+ fb->pixel_format);
/*
* Both PLANE_CTL and PLANE_STRIDE are not updated on vblank but on
I915_WRITE(PLANE_CTL(pipe, 0), ctl);
I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
- I915_WRITE(PLANE_SURF(pipe, 0), intel_crtc->unpin_work->gtt_offset);
+ I915_WRITE(PLANE_SURF(pipe, 0), work->gtt_offset);
POSTING_READ(PLANE_SURF(pipe, 0));
}
-static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc)
+static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc,
+ struct intel_unpin_work *work)
{
struct drm_device *dev = intel_crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(reg, dspcntr);
- I915_WRITE(DSPSURF(intel_crtc->plane),
- intel_crtc->unpin_work->gtt_offset);
+ I915_WRITE(DSPSURF(intel_crtc->plane), work->gtt_offset);
POSTING_READ(DSPSURF(intel_crtc->plane));
-
}
/*
* XXX: This is the temporary way to update the plane registers until we get
* around to using the usual plane update functions for MMIO flips
*/
-static void intel_do_mmio_flip(struct intel_crtc *intel_crtc)
+static void intel_do_mmio_flip(struct intel_mmio_flip *mmio_flip)
{
- struct drm_device *dev = intel_crtc->base.dev;
- bool atomic_update;
- u32 start_vbl_count;
+ struct intel_crtc *crtc = mmio_flip->crtc;
+ struct intel_unpin_work *work;
- intel_mark_page_flip_active(intel_crtc);
+ spin_lock_irq(&crtc->base.dev->event_lock);
+ work = crtc->unpin_work;
+ spin_unlock_irq(&crtc->base.dev->event_lock);
+ if (work == NULL)
+ return;
- atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
+ intel_mark_page_flip_active(work);
- if (INTEL_INFO(dev)->gen >= 9)
- skl_do_mmio_flip(intel_crtc);
+ intel_pipe_update_start(crtc);
+
+ if (INTEL_INFO(mmio_flip->i915)->gen >= 9)
+ skl_do_mmio_flip(crtc, work);
else
/* use_mmio_flip() retricts MMIO flips to ilk+ */
- ilk_do_mmio_flip(intel_crtc);
+ ilk_do_mmio_flip(crtc, work);
- if (atomic_update)
- intel_pipe_update_end(intel_crtc, start_vbl_count);
+ intel_pipe_update_end(crtc);
}
static void intel_mmio_flip_work_func(struct work_struct *work)
{
- struct intel_crtc *crtc =
- container_of(work, struct intel_crtc, mmio_flip.work);
- struct intel_mmio_flip *mmio_flip;
-
- mmio_flip = &crtc->mmio_flip;
- if (mmio_flip->req)
- WARN_ON(__i915_wait_request(mmio_flip->req,
- crtc->reset_counter,
- false, NULL, NULL) != 0);
+ struct intel_mmio_flip *mmio_flip =
+ container_of(work, struct intel_mmio_flip, work);
- intel_do_mmio_flip(crtc);
if (mmio_flip->req) {
- mutex_lock(&crtc->base.dev->struct_mutex);
- i915_gem_request_assign(&mmio_flip->req, NULL);
- mutex_unlock(&crtc->base.dev->struct_mutex);
+ WARN_ON(__i915_wait_request(mmio_flip->req,
+ mmio_flip->crtc->reset_counter,
+ false, NULL,
+ &mmio_flip->i915->rps.mmioflips));
+ i915_gem_request_unreference__unlocked(mmio_flip->req);
}
+
+ intel_do_mmio_flip(mmio_flip);
+ kfree(mmio_flip);
}
static int intel_queue_mmio_flip(struct drm_device *dev,
struct intel_engine_cs *ring,
uint32_t flags)
{
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_mmio_flip *mmio_flip;
+
+ mmio_flip = kmalloc(sizeof(*mmio_flip), GFP_KERNEL);
+ if (mmio_flip == NULL)
+ return -ENOMEM;
- i915_gem_request_assign(&intel_crtc->mmio_flip.req,
- obj->last_write_req);
+ mmio_flip->i915 = to_i915(dev);
+ mmio_flip->req = i915_gem_request_reference(obj->last_write_req);
+ mmio_flip->crtc = to_intel_crtc(crtc);
- schedule_work(&intel_crtc->mmio_flip.work);
+ INIT_WORK(&mmio_flip->work, intel_mmio_flip_work_func);
+ schedule_work(&mmio_flip->work);
return 0;
}
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj,
- struct intel_engine_cs *ring,
+ struct drm_i915_gem_request *req,
uint32_t flags)
{
return -ENODEV;
if (atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE)
return true;
+ if (atomic_read(&work->pending) < INTEL_FLIP_PENDING)
+ return false;
+
if (!work->enable_stall_check)
return false;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_unpin_work *work;
WARN_ON_NONRT(!in_interrupt());
return;
spin_lock(&dev->event_lock);
- if (intel_crtc->unpin_work && __intel_pageflip_stall_check(dev, crtc)) {
+ work = intel_crtc->unpin_work;
+ if (work != NULL && __intel_pageflip_stall_check(dev, crtc)) {
WARN_ONCE(1, "Kicking stuck page flip: queued at %d, now %d\n",
- intel_crtc->unpin_work->flip_queued_vblank,
- drm_vblank_count(dev, pipe));
+ work->flip_queued_vblank, drm_vblank_count(dev, pipe));
page_flip_completed(intel_crtc);
+ work = NULL;
}
+ if (work != NULL &&
+ drm_vblank_count(dev, pipe) - work->flip_queued_vblank > 1)
+ intel_queue_rps_boost_for_request(dev, work->flip_queued_req);
spin_unlock(&dev->event_lock);
}
enum pipe pipe = intel_crtc->pipe;
struct intel_unpin_work *work;
struct intel_engine_cs *ring;
+ bool mmio_flip;
+ struct drm_i915_gem_request *request = NULL;
int ret;
/*
intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
- work->flip_count = I915_READ(PIPE_FLIPCOUNT_GM45(pipe)) + 1;
+ work->flip_count = I915_READ(PIPE_FLIPCOUNT_G4X(pipe)) + 1;
if (IS_VALLEYVIEW(dev)) {
ring = &dev_priv->ring[BCS];
} else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
ring = &dev_priv->ring[BCS];
} else if (INTEL_INFO(dev)->gen >= 7) {
- ring = i915_gem_request_get_ring(obj->last_read_req);
+ ring = i915_gem_request_get_ring(obj->last_write_req);
if (ring == NULL || ring->id != RCS)
ring = &dev_priv->ring[BCS];
} else {
ring = &dev_priv->ring[RCS];
}
+ mmio_flip = use_mmio_flip(ring, obj);
+
+ /* When using CS flips, we want to emit semaphores between rings.
+ * However, when using mmio flips we will create a task to do the
+ * synchronisation, so all we want here is to pin the framebuffer
+ * into the display plane and skip any waits.
+ */
ret = intel_pin_and_fence_fb_obj(crtc->primary, fb,
- crtc->primary->state, ring);
+ crtc->primary->state,
+ mmio_flip ? i915_gem_request_get_ring(obj->last_write_req) : ring, &request);
if (ret)
goto cleanup_pending;
- work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary), obj)
- + intel_crtc->dspaddr_offset;
+ work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary),
+ obj, 0);
+ work->gtt_offset += intel_crtc->dspaddr_offset;
- if (use_mmio_flip(ring, obj)) {
+ if (mmio_flip) {
ret = intel_queue_mmio_flip(dev, crtc, fb, obj, ring,
page_flip_flags);
if (ret)
i915_gem_request_assign(&work->flip_queued_req,
obj->last_write_req);
} else {
- ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, ring,
+ if (!request) {
+ ret = i915_gem_request_alloc(ring, ring->default_context, &request);
+ if (ret)
+ goto cleanup_unpin;
+ }
+
+ ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, request,
page_flip_flags);
if (ret)
goto cleanup_unpin;
- i915_gem_request_assign(&work->flip_queued_req,
- intel_ring_get_request(ring));
+ i915_gem_request_assign(&work->flip_queued_req, request);
}
+ if (request)
+ i915_add_request_no_flush(request);
+
work->flip_queued_vblank = drm_crtc_vblank_count(crtc);
work->enable_stall_check = true;
i915_gem_track_fb(intel_fb_obj(work->old_fb), obj,
- INTEL_FRONTBUFFER_PRIMARY(pipe));
-
- intel_fbc_disable(dev);
- intel_frontbuffer_flip_prepare(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
+ to_intel_plane(primary)->frontbuffer_bit);
mutex_unlock(&dev->struct_mutex);
+ intel_fbc_disable_crtc(intel_crtc);
+ intel_frontbuffer_flip_prepare(dev,
+ to_intel_plane(primary)->frontbuffer_bit);
+
trace_i915_flip_request(intel_crtc->plane, obj);
return 0;
cleanup_unpin:
intel_unpin_fb_obj(fb, crtc->primary->state);
cleanup_pending:
+ if (request)
+ i915_gem_request_cancel(request);
atomic_dec(&intel_crtc->unpin_work_count);
mutex_unlock(&dev->struct_mutex);
cleanup:
kfree(work);
if (ret == -EIO) {
+ struct drm_atomic_state *state;
+ struct drm_plane_state *plane_state;
+
out_hang:
- ret = intel_plane_restore(primary);
+ state = drm_atomic_state_alloc(dev);
+ if (!state)
+ return -ENOMEM;
+ state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
+
+retry:
+ plane_state = drm_atomic_get_plane_state(state, primary);
+ ret = PTR_ERR_OR_ZERO(plane_state);
+ if (!ret) {
+ drm_atomic_set_fb_for_plane(plane_state, fb);
+
+ ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
+ if (!ret)
+ ret = drm_atomic_commit(state);
+ }
+
+ if (ret == -EDEADLK) {
+ drm_modeset_backoff(state->acquire_ctx);
+ drm_atomic_state_clear(state);
+ goto retry;
+ }
+
+ if (ret)
+ drm_atomic_state_free(state);
+
if (ret == 0 && event) {
spin_lock_irq(&dev->event_lock);
drm_send_vblank_event(dev, pipe, event);
return ret;
}
-static struct drm_crtc_helper_funcs intel_helper_funcs = {
- .mode_set_base_atomic = intel_pipe_set_base_atomic,
- .load_lut = intel_crtc_load_lut,
- .atomic_begin = intel_begin_crtc_commit,
- .atomic_flush = intel_finish_crtc_commit,
-};
/**
- * intel_modeset_update_staged_output_state
+ * intel_wm_need_update - Check whether watermarks need updating
+ * @plane: drm plane
+ * @state: new plane state
*
- * Updates the staged output configuration state, e.g. after we've read out the
- * current hw state.
+ * Check current plane state versus the new one to determine whether
+ * watermarks need to be recalculated.
+ *
+ * Returns true or false.
*/
-static void intel_modeset_update_staged_output_state(struct drm_device *dev)
+static bool intel_wm_need_update(struct drm_plane *plane,
+ struct drm_plane_state *state)
{
- struct intel_crtc *crtc;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
+ /* Update watermarks on tiling changes. */
+ if (!plane->state->fb || !state->fb ||
+ plane->state->fb->modifier[0] != state->fb->modifier[0] ||
+ plane->state->rotation != state->rotation)
+ return true;
- for_each_intel_connector(dev, connector) {
- connector->new_encoder =
- to_intel_encoder(connector->base.encoder);
+ if (plane->state->crtc_w != state->crtc_w)
+ return true;
+
+ return false;
+}
+
+int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
+ struct drm_plane_state *plane_state)
+{
+ struct drm_crtc *crtc = crtc_state->crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_plane *plane = plane_state->plane;
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_plane_state *old_plane_state =
+ to_intel_plane_state(plane->state);
+ int idx = intel_crtc->base.base.id, ret;
+ int i = drm_plane_index(plane);
+ bool mode_changed = needs_modeset(crtc_state);
+ bool was_crtc_enabled = crtc->state->active;
+ bool is_crtc_enabled = crtc_state->active;
+
+ bool turn_off, turn_on, visible, was_visible;
+ struct drm_framebuffer *fb = plane_state->fb;
+
+ if (crtc_state && INTEL_INFO(dev)->gen >= 9 &&
+ plane->type != DRM_PLANE_TYPE_CURSOR) {
+ ret = skl_update_scaler_plane(
+ to_intel_crtc_state(crtc_state),
+ to_intel_plane_state(plane_state));
+ if (ret)
+ return ret;
}
- for_each_intel_encoder(dev, encoder) {
- encoder->new_crtc =
- to_intel_crtc(encoder->base.crtc);
+ /*
+ * Disabling a plane is always okay; we just need to update
+ * fb tracking in a special way since cleanup_fb() won't
+ * get called by the plane helpers.
+ */
+ if (old_plane_state->base.fb && !fb)
+ intel_crtc->atomic.disabled_planes |= 1 << i;
+
+ was_visible = old_plane_state->visible;
+ visible = to_intel_plane_state(plane_state)->visible;
+
+ if (!was_crtc_enabled && WARN_ON(was_visible))
+ was_visible = false;
+
+ if (!is_crtc_enabled && WARN_ON(visible))
+ visible = false;
+
+ if (!was_visible && !visible)
+ return 0;
+
+ turn_off = was_visible && (!visible || mode_changed);
+ turn_on = visible && (!was_visible || mode_changed);
+
+ DRM_DEBUG_ATOMIC("[CRTC:%i] has [PLANE:%i] with fb %i\n", idx,
+ plane->base.id, fb ? fb->base.id : -1);
+
+ DRM_DEBUG_ATOMIC("[PLANE:%i] visible %i -> %i, off %i, on %i, ms %i\n",
+ plane->base.id, was_visible, visible,
+ turn_off, turn_on, mode_changed);
+
+ if (turn_on) {
+ intel_crtc->atomic.update_wm_pre = true;
+ /* must disable cxsr around plane enable/disable */
+ if (plane->type != DRM_PLANE_TYPE_CURSOR) {
+ intel_crtc->atomic.disable_cxsr = true;
+ /* to potentially re-enable cxsr */
+ intel_crtc->atomic.wait_vblank = true;
+ intel_crtc->atomic.update_wm_post = true;
+ }
+ } else if (turn_off) {
+ intel_crtc->atomic.update_wm_post = true;
+ /* must disable cxsr around plane enable/disable */
+ if (plane->type != DRM_PLANE_TYPE_CURSOR) {
+ if (is_crtc_enabled)
+ intel_crtc->atomic.wait_vblank = true;
+ intel_crtc->atomic.disable_cxsr = true;
+ }
+ } else if (intel_wm_need_update(plane, plane_state)) {
+ intel_crtc->atomic.update_wm_pre = true;
}
- for_each_intel_crtc(dev, crtc) {
- crtc->new_enabled = crtc->base.state->enable;
+ if (visible || was_visible)
+ intel_crtc->atomic.fb_bits |=
+ to_intel_plane(plane)->frontbuffer_bit;
- if (crtc->new_enabled)
- crtc->new_config = crtc->config;
- else
- crtc->new_config = NULL;
+ switch (plane->type) {
+ case DRM_PLANE_TYPE_PRIMARY:
+ intel_crtc->atomic.wait_for_flips = true;
+ intel_crtc->atomic.pre_disable_primary = turn_off;
+ intel_crtc->atomic.post_enable_primary = turn_on;
+
+ if (turn_off) {
+ /*
+ * FIXME: Actually if we will still have any other
+ * plane enabled on the pipe we could let IPS enabled
+ * still, but for now lets consider that when we make
+ * primary invisible by setting DSPCNTR to 0 on
+ * update_primary_plane function IPS needs to be
+ * disable.
+ */
+ intel_crtc->atomic.disable_ips = true;
+
+ intel_crtc->atomic.disable_fbc = true;
+ }
+
+ /*
+ * FBC does not work on some platforms for rotated
+ * planes, so disable it when rotation is not 0 and
+ * update it when rotation is set back to 0.
+ *
+ * FIXME: This is redundant with the fbc update done in
+ * the primary plane enable function except that that
+ * one is done too late. We eventually need to unify
+ * this.
+ */
+
+ if (visible &&
+ INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
+ dev_priv->fbc.crtc == intel_crtc &&
+ plane_state->rotation != BIT(DRM_ROTATE_0))
+ intel_crtc->atomic.disable_fbc = true;
+
+ /*
+ * BDW signals flip done immediately if the plane
+ * is disabled, even if the plane enable is already
+ * armed to occur at the next vblank :(
+ */
+ if (turn_on && IS_BROADWELL(dev))
+ intel_crtc->atomic.wait_vblank = true;
+
+ intel_crtc->atomic.update_fbc |= visible || mode_changed;
+ break;
+ case DRM_PLANE_TYPE_CURSOR:
+ break;
+ case DRM_PLANE_TYPE_OVERLAY:
+ if (turn_off && !mode_changed) {
+ intel_crtc->atomic.wait_vblank = true;
+ intel_crtc->atomic.update_sprite_watermarks |=
+ 1 << i;
+ }
}
+ return 0;
}
-/* Transitional helper to copy current connector/encoder state to
- * connector->state. This is needed so that code that is partially
- * converted to atomic does the right thing.
- */
-static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
+static bool encoders_cloneable(const struct intel_encoder *a,
+ const struct intel_encoder *b)
{
- struct intel_connector *connector;
+ /* masks could be asymmetric, so check both ways */
+ return a == b || (a->cloneable & (1 << b->type) &&
+ b->cloneable & (1 << a->type));
+}
- for_each_intel_connector(dev, connector) {
- if (connector->base.encoder) {
- connector->base.state->best_encoder =
- connector->base.encoder;
- connector->base.state->crtc =
- connector->base.encoder->crtc;
- } else {
- connector->base.state->best_encoder = NULL;
- connector->base.state->crtc = NULL;
- }
+static bool check_single_encoder_cloning(struct drm_atomic_state *state,
+ struct intel_crtc *crtc,
+ struct intel_encoder *encoder)
+{
+ struct intel_encoder *source_encoder;
+ struct drm_connector *connector;
+ struct drm_connector_state *connector_state;
+ int i;
+
+ for_each_connector_in_state(state, connector, connector_state, i) {
+ if (connector_state->crtc != &crtc->base)
+ continue;
+
+ source_encoder =
+ to_intel_encoder(connector_state->best_encoder);
+ if (!encoders_cloneable(encoder, source_encoder))
+ return false;
}
+
+ return true;
}
-/**
- * intel_modeset_commit_output_state
- *
- * This function copies the stage display pipe configuration to the real one.
- */
-static void intel_modeset_commit_output_state(struct drm_device *dev)
+static bool check_encoder_cloning(struct drm_atomic_state *state,
+ struct intel_crtc *crtc)
{
- struct intel_crtc *crtc;
struct intel_encoder *encoder;
+ struct drm_connector *connector;
+ struct drm_connector_state *connector_state;
+ int i;
+
+ for_each_connector_in_state(state, connector, connector_state, i) {
+ if (connector_state->crtc != &crtc->base)
+ continue;
+
+ encoder = to_intel_encoder(connector_state->best_encoder);
+ if (!check_single_encoder_cloning(state, crtc, encoder))
+ return false;
+ }
+
+ return true;
+}
+
+static int intel_crtc_atomic_check(struct drm_crtc *crtc,
+ struct drm_crtc_state *crtc_state)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_crtc_state *pipe_config =
+ to_intel_crtc_state(crtc_state);
+ struct drm_atomic_state *state = crtc_state->state;
+ int ret;
+ bool mode_changed = needs_modeset(crtc_state);
+
+ if (mode_changed && !check_encoder_cloning(state, intel_crtc)) {
+ DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
+ return -EINVAL;
+ }
+
+ if (mode_changed && !crtc_state->active)
+ intel_crtc->atomic.update_wm_post = true;
+
+ if (mode_changed && crtc_state->enable &&
+ dev_priv->display.crtc_compute_clock &&
+ !WARN_ON(pipe_config->shared_dpll != DPLL_ID_PRIVATE)) {
+ ret = dev_priv->display.crtc_compute_clock(intel_crtc,
+ pipe_config);
+ if (ret)
+ return ret;
+ }
+
+ ret = 0;
+ if (INTEL_INFO(dev)->gen >= 9) {
+ if (mode_changed)
+ ret = skl_update_scaler_crtc(pipe_config);
+
+ if (!ret)
+ ret = intel_atomic_setup_scalers(dev, intel_crtc,
+ pipe_config);
+ }
+
+ return ret;
+}
+
+static const struct drm_crtc_helper_funcs intel_helper_funcs = {
+ .mode_set_base_atomic = intel_pipe_set_base_atomic,
+ .load_lut = intel_crtc_load_lut,
+ .atomic_begin = intel_begin_crtc_commit,
+ .atomic_flush = intel_finish_crtc_commit,
+ .atomic_check = intel_crtc_atomic_check,
+};
+
+static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
+{
struct intel_connector *connector;
for_each_intel_connector(dev, connector) {
- connector->base.encoder = &connector->new_encoder->base;
- }
-
- for_each_intel_encoder(dev, encoder) {
- encoder->base.crtc = &encoder->new_crtc->base;
- }
-
- for_each_intel_crtc(dev, crtc) {
- crtc->base.state->enable = crtc->new_enabled;
- crtc->base.enabled = crtc->new_enabled;
+ if (connector->base.encoder) {
+ connector->base.state->best_encoder =
+ connector->base.encoder;
+ connector->base.state->crtc =
+ connector->base.encoder->crtc;
+ } else {
+ connector->base.state->best_encoder = NULL;
+ connector->base.state->crtc = NULL;
+ }
}
-
- intel_modeset_update_connector_atomic_state(dev);
}
static void
pipe_config->pipe_bpp = connector->base.display_info.bpc*3;
}
- /* Clamp bpp to 8 on screens without EDID 1.4 */
- if (connector->base.display_info.bpc == 0 && bpp > 24) {
- DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n",
- bpp);
- pipe_config->pipe_bpp = 24;
+ /* Clamp bpp to default limit on screens without EDID 1.4 */
+ if (connector->base.display_info.bpc == 0) {
+ int type = connector->base.connector_type;
+ int clamp_bpp = 24;
+
+ /* Fall back to 18 bpp when DP sink capability is unknown. */
+ if (type == DRM_MODE_CONNECTOR_DisplayPort ||
+ type == DRM_MODE_CONNECTOR_eDP)
+ clamp_bpp = 18;
+
+ if (bpp > clamp_bpp) {
+ DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of %d\n",
+ bpp, clamp_bpp);
+ pipe_config->pipe_bpp = clamp_bpp;
+ }
}
}
static int
compute_baseline_pipe_bpp(struct intel_crtc *crtc,
- struct drm_framebuffer *fb,
struct intel_crtc_state *pipe_config)
{
struct drm_device *dev = crtc->base.dev;
struct drm_atomic_state *state;
- struct intel_connector *connector;
+ struct drm_connector *connector;
+ struct drm_connector_state *connector_state;
int bpp, i;
- switch (fb->pixel_format) {
- case DRM_FORMAT_C8:
- bpp = 8*3; /* since we go through a colormap */
- break;
- case DRM_FORMAT_XRGB1555:
- case DRM_FORMAT_ARGB1555:
- /* checked in intel_framebuffer_init already */
- if (WARN_ON(INTEL_INFO(dev)->gen > 3))
- return -EINVAL;
- case DRM_FORMAT_RGB565:
- bpp = 6*3; /* min is 18bpp */
- break;
- case DRM_FORMAT_XBGR8888:
- case DRM_FORMAT_ABGR8888:
- /* checked in intel_framebuffer_init already */
- if (WARN_ON(INTEL_INFO(dev)->gen < 4))
- return -EINVAL;
- case DRM_FORMAT_XRGB8888:
- case DRM_FORMAT_ARGB8888:
- bpp = 8*3;
- break;
- case DRM_FORMAT_XRGB2101010:
- case DRM_FORMAT_ARGB2101010:
- case DRM_FORMAT_XBGR2101010:
- case DRM_FORMAT_ABGR2101010:
- /* checked in intel_framebuffer_init already */
- if (WARN_ON(INTEL_INFO(dev)->gen < 4))
- return -EINVAL;
+ if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)))
bpp = 10*3;
- break;
- /* TODO: gen4+ supports 16 bpc floating point, too. */
- default:
- DRM_DEBUG_KMS("unsupported depth\n");
- return -EINVAL;
- }
+ else if (INTEL_INFO(dev)->gen >= 5)
+ bpp = 12*3;
+ else
+ bpp = 8*3;
+
pipe_config->pipe_bpp = bpp;
state = pipe_config->base.state;
/* Clamp display bpp to EDID value */
- for (i = 0; i < state->num_connector; i++) {
- if (!state->connectors[i])
- continue;
-
- connector = to_intel_connector(state->connectors[i]);
- if (state->connector_states[i]->crtc != &crtc->base)
+ for_each_connector_in_state(state, connector, connector_state, i) {
+ if (connector_state->crtc != &crtc->base)
continue;
- connected_sink_compute_bpp(connector, pipe_config);
+ connected_sink_compute_bpp(to_intel_connector(connector),
+ pipe_config);
}
return bpp;
struct intel_crtc_state *pipe_config,
const char *context)
{
- DRM_DEBUG_KMS("[CRTC:%d]%s config for pipe %c\n", crtc->base.base.id,
- context, pipe_name(crtc->pipe));
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_plane *plane;
+ struct intel_plane *intel_plane;
+ struct intel_plane_state *state;
+ struct drm_framebuffer *fb;
+
+ DRM_DEBUG_KMS("[CRTC:%d]%s config %p for pipe %c\n", crtc->base.base.id,
+ context, pipe_config, pipe_name(crtc->pipe));
DRM_DEBUG_KMS("cpu_transcoder: %c\n", transcoder_name(pipe_config->cpu_transcoder));
DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n",
pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
pipe_config->fdi_m_n.tu);
- DRM_DEBUG_KMS("dp: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
+ DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
pipe_config->has_dp_encoder,
+ pipe_config->lane_count,
pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
pipe_config->dp_m_n.tu);
- DRM_DEBUG_KMS("dp: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
+ DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
pipe_config->has_dp_encoder,
+ pipe_config->lane_count,
pipe_config->dp_m2_n2.gmch_m,
pipe_config->dp_m2_n2.gmch_n,
pipe_config->dp_m2_n2.link_m,
DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock);
DRM_DEBUG_KMS("pipe src size: %dx%d\n",
pipe_config->pipe_src_w, pipe_config->pipe_src_h);
+ DRM_DEBUG_KMS("num_scalers: %d, scaler_users: 0x%x, scaler_id: %d\n",
+ crtc->num_scalers,
+ pipe_config->scaler_state.scaler_users,
+ pipe_config->scaler_state.scaler_id);
DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
pipe_config->gmch_pfit.control,
pipe_config->gmch_pfit.pgm_ratios,
pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
-}
-
-static bool encoders_cloneable(const struct intel_encoder *a,
- const struct intel_encoder *b)
-{
- /* masks could be asymmetric, so check both ways */
- return a == b || (a->cloneable & (1 << b->type) &&
- b->cloneable & (1 << a->type));
-}
-
-static bool check_single_encoder_cloning(struct intel_crtc *crtc,
- struct intel_encoder *encoder)
-{
- struct drm_device *dev = crtc->base.dev;
- struct intel_encoder *source_encoder;
-
- for_each_intel_encoder(dev, source_encoder) {
- if (source_encoder->new_crtc != crtc)
- continue;
- if (!encoders_cloneable(encoder, source_encoder))
- return false;
+ if (IS_BROXTON(dev)) {
+ DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, ebb4: 0x%x,"
+ "pll0: 0x%x, pll1: 0x%x, pll2: 0x%x, pll3: 0x%x, "
+ "pll6: 0x%x, pll8: 0x%x, pll9: 0x%x, pll10: 0x%x, pcsdw12: 0x%x\n",
+ pipe_config->ddi_pll_sel,
+ pipe_config->dpll_hw_state.ebb0,
+ pipe_config->dpll_hw_state.ebb4,
+ pipe_config->dpll_hw_state.pll0,
+ pipe_config->dpll_hw_state.pll1,
+ pipe_config->dpll_hw_state.pll2,
+ pipe_config->dpll_hw_state.pll3,
+ pipe_config->dpll_hw_state.pll6,
+ pipe_config->dpll_hw_state.pll8,
+ pipe_config->dpll_hw_state.pll9,
+ pipe_config->dpll_hw_state.pll10,
+ pipe_config->dpll_hw_state.pcsdw12);
+ } else if (IS_SKYLAKE(dev)) {
+ DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: "
+ "ctrl1: 0x%x, cfgcr1: 0x%x, cfgcr2: 0x%x\n",
+ pipe_config->ddi_pll_sel,
+ pipe_config->dpll_hw_state.ctrl1,
+ pipe_config->dpll_hw_state.cfgcr1,
+ pipe_config->dpll_hw_state.cfgcr2);
+ } else if (HAS_DDI(dev)) {
+ DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: wrpll: 0x%x spll: 0x%x\n",
+ pipe_config->ddi_pll_sel,
+ pipe_config->dpll_hw_state.wrpll,
+ pipe_config->dpll_hw_state.spll);
+ } else {
+ DRM_DEBUG_KMS("dpll_hw_state: dpll: 0x%x, dpll_md: 0x%x, "
+ "fp0: 0x%x, fp1: 0x%x\n",
+ pipe_config->dpll_hw_state.dpll,
+ pipe_config->dpll_hw_state.dpll_md,
+ pipe_config->dpll_hw_state.fp0,
+ pipe_config->dpll_hw_state.fp1);
}
- return true;
-}
-
-static bool check_encoder_cloning(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct intel_encoder *encoder;
+ DRM_DEBUG_KMS("planes on this crtc\n");
+ list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
+ intel_plane = to_intel_plane(plane);
+ if (intel_plane->pipe != crtc->pipe)
+ continue;
- for_each_intel_encoder(dev, encoder) {
- if (encoder->new_crtc != crtc)
+ state = to_intel_plane_state(plane->state);
+ fb = state->base.fb;
+ if (!fb) {
+ DRM_DEBUG_KMS("%s PLANE:%d plane: %u.%u idx: %d "
+ "disabled, scaler_id = %d\n",
+ plane->type == DRM_PLANE_TYPE_CURSOR ? "CURSOR" : "STANDARD",
+ plane->base.id, intel_plane->pipe,
+ (crtc->base.primary == plane) ? 0 : intel_plane->plane + 1,
+ drm_plane_index(plane), state->scaler_id);
continue;
+ }
- if (!check_single_encoder_cloning(crtc, encoder))
- return false;
+ DRM_DEBUG_KMS("%s PLANE:%d plane: %u.%u idx: %d enabled",
+ plane->type == DRM_PLANE_TYPE_CURSOR ? "CURSOR" : "STANDARD",
+ plane->base.id, intel_plane->pipe,
+ crtc->base.primary == plane ? 0 : intel_plane->plane + 1,
+ drm_plane_index(plane));
+ DRM_DEBUG_KMS("\tFB:%d, fb = %ux%u format = 0x%x",
+ fb->base.id, fb->width, fb->height, fb->pixel_format);
+ DRM_DEBUG_KMS("\tscaler:%d src (%u, %u) %ux%u dst (%u, %u) %ux%u\n",
+ state->scaler_id,
+ state->src.x1 >> 16, state->src.y1 >> 16,
+ drm_rect_width(&state->src) >> 16,
+ drm_rect_height(&state->src) >> 16,
+ state->dst.x1, state->dst.y1,
+ drm_rect_width(&state->dst), drm_rect_height(&state->dst));
}
-
- return true;
}
-static bool check_digital_port_conflicts(struct drm_device *dev)
+static bool check_digital_port_conflicts(struct drm_atomic_state *state)
{
- struct intel_connector *connector;
+ struct drm_device *dev = state->dev;
+ struct drm_connector *connector;
unsigned int used_ports = 0;
/*
* list to detect the problem on ddi platforms
* where there's just one encoder per digital port.
*/
- for_each_intel_connector(dev, connector) {
- struct intel_encoder *encoder = connector->new_encoder;
+ drm_for_each_connector(connector, dev) {
+ struct drm_connector_state *connector_state;
+ struct intel_encoder *encoder;
- if (!encoder)
+ connector_state = drm_atomic_get_existing_connector_state(state, connector);
+ if (!connector_state)
+ connector_state = connector->state;
+
+ if (!connector_state->best_encoder)
continue;
- WARN_ON(!encoder->new_crtc);
+ encoder = to_intel_encoder(connector_state->best_encoder);
+
+ WARN_ON(!connector_state->crtc);
switch (encoder->type) {
unsigned int port_mask;
clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
{
struct drm_crtc_state tmp_state;
+ struct intel_crtc_scaler_state scaler_state;
+ struct intel_dpll_hw_state dpll_hw_state;
+ enum intel_dpll_id shared_dpll;
+ uint32_t ddi_pll_sel;
+ bool force_thru;
+
+ /* FIXME: before the switch to atomic started, a new pipe_config was
+ * kzalloc'd. Code that depends on any field being zero should be
+ * fixed, so that the crtc_state can be safely duplicated. For now,
+ * only fields that are know to not cause problems are preserved. */
- /* Clear only the intel specific part of the crtc state */
tmp_state = crtc_state->base;
+ scaler_state = crtc_state->scaler_state;
+ shared_dpll = crtc_state->shared_dpll;
+ dpll_hw_state = crtc_state->dpll_hw_state;
+ ddi_pll_sel = crtc_state->ddi_pll_sel;
+ force_thru = crtc_state->pch_pfit.force_thru;
+
memset(crtc_state, 0, sizeof *crtc_state);
+
crtc_state->base = tmp_state;
+ crtc_state->scaler_state = scaler_state;
+ crtc_state->shared_dpll = shared_dpll;
+ crtc_state->dpll_hw_state = dpll_hw_state;
+ crtc_state->ddi_pll_sel = ddi_pll_sel;
+ crtc_state->pch_pfit.force_thru = force_thru;
}
-static struct intel_crtc_state *
+static int
intel_modeset_pipe_config(struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- struct drm_display_mode *mode,
- struct drm_atomic_state *state)
+ struct intel_crtc_state *pipe_config)
{
- struct drm_device *dev = crtc->dev;
+ struct drm_atomic_state *state = pipe_config->base.state;
struct intel_encoder *encoder;
- struct intel_connector *connector;
+ struct drm_connector *connector;
struct drm_connector_state *connector_state;
- struct intel_crtc_state *pipe_config;
- int plane_bpp, ret = -EINVAL;
+ int base_bpp, ret = -EINVAL;
int i;
bool retry = true;
- if (!check_encoder_cloning(to_intel_crtc(crtc))) {
- DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
- return ERR_PTR(-EINVAL);
- }
-
- if (!check_digital_port_conflicts(dev)) {
- DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n");
- return ERR_PTR(-EINVAL);
- }
-
- pipe_config = intel_atomic_get_crtc_state(state, to_intel_crtc(crtc));
- if (IS_ERR(pipe_config))
- return pipe_config;
-
clear_intel_crtc_state(pipe_config);
- pipe_config->base.crtc = crtc;
- drm_mode_copy(&pipe_config->base.adjusted_mode, mode);
- drm_mode_copy(&pipe_config->base.mode, mode);
-
pipe_config->cpu_transcoder =
(enum transcoder) to_intel_crtc(crtc)->pipe;
- pipe_config->shared_dpll = DPLL_ID_PRIVATE;
/*
* Sanitize sync polarity flags based on requested ones. If neither
(DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
- /* Compute a starting value for pipe_config->pipe_bpp taking the source
- * plane pixel format and any sink constraints into account. Returns the
- * source plane bpp so that dithering can be selected on mismatches
- * after encoders and crtc also have had their say. */
- plane_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
- fb, pipe_config);
- if (plane_bpp < 0)
+ base_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
+ pipe_config);
+ if (base_bpp < 0)
goto fail;
/*
* adjust it according to limitations or connector properties, and also
* a chance to reject the mode entirely.
*/
- for (i = 0; i < state->num_connector; i++) {
- connector = to_intel_connector(state->connectors[i]);
- if (!connector)
- continue;
-
- connector_state = state->connector_states[i];
+ for_each_connector_in_state(state, connector, connector_state, i) {
if (connector_state->crtc != crtc)
continue;
goto encoder_retry;
}
- pipe_config->dither = pipe_config->pipe_bpp != plane_bpp;
- DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
- plane_bpp, pipe_config->pipe_bpp, pipe_config->dither);
+ /* Dithering seems to not pass-through bits correctly when it should, so
+ * only enable it on 6bpc panels. */
+ pipe_config->dither = pipe_config->pipe_bpp == 6*3;
+ DRM_DEBUG_KMS("hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
+ base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
- return pipe_config;
fail:
- return ERR_PTR(ret);
-}
-
-/* Computes which crtcs are affected and sets the relevant bits in the mask. For
- * simplicity we use the crtc's pipe number (because it's easier to obtain). */
-static void
-intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes,
- unsigned *prepare_pipes, unsigned *disable_pipes)
-{
- struct intel_crtc *intel_crtc;
- struct drm_device *dev = crtc->dev;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
- struct drm_crtc *tmp_crtc;
-
- *disable_pipes = *modeset_pipes = *prepare_pipes = 0;
-
- /* Check which crtcs have changed outputs connected to them, these need
- * to be part of the prepare_pipes mask. We don't (yet) support global
- * modeset across multiple crtcs, so modeset_pipes will only have one
- * bit set at most. */
- for_each_intel_connector(dev, connector) {
- if (connector->base.encoder == &connector->new_encoder->base)
- continue;
-
- if (connector->base.encoder) {
- tmp_crtc = connector->base.encoder->crtc;
-
- *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
- }
-
- if (connector->new_encoder)
- *prepare_pipes |=
- 1 << connector->new_encoder->new_crtc->pipe;
- }
-
- for_each_intel_encoder(dev, encoder) {
- if (encoder->base.crtc == &encoder->new_crtc->base)
- continue;
-
- if (encoder->base.crtc) {
- tmp_crtc = encoder->base.crtc;
-
- *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
- }
-
- if (encoder->new_crtc)
- *prepare_pipes |= 1 << encoder->new_crtc->pipe;
- }
-
- /* Check for pipes that will be enabled/disabled ... */
- for_each_intel_crtc(dev, intel_crtc) {
- if (intel_crtc->base.state->enable == intel_crtc->new_enabled)
- continue;
-
- if (!intel_crtc->new_enabled)
- *disable_pipes |= 1 << intel_crtc->pipe;
- else
- *prepare_pipes |= 1 << intel_crtc->pipe;
- }
-
-
- /* set_mode is also used to update properties on life display pipes. */
- intel_crtc = to_intel_crtc(crtc);
- if (intel_crtc->new_enabled)
- *prepare_pipes |= 1 << intel_crtc->pipe;
-
- /*
- * For simplicity do a full modeset on any pipe where the output routing
- * changed. We could be more clever, but that would require us to be
- * more careful with calling the relevant encoder->mode_set functions.
- */
- if (*prepare_pipes)
- *modeset_pipes = *prepare_pipes;
-
- /* ... and mask these out. */
- *modeset_pipes &= ~(*disable_pipes);
- *prepare_pipes &= ~(*disable_pipes);
-
- /*
- * HACK: We don't (yet) fully support global modesets. intel_set_config
- * obies this rule, but the modeset restore mode of
- * intel_modeset_setup_hw_state does not.
- */
- *modeset_pipes &= 1 << intel_crtc->pipe;
- *prepare_pipes &= 1 << intel_crtc->pipe;
-
- DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
- *modeset_pipes, *prepare_pipes, *disable_pipes);
-}
-
-static bool intel_crtc_in_use(struct drm_crtc *crtc)
-{
- struct drm_encoder *encoder;
- struct drm_device *dev = crtc->dev;
-
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
- if (encoder->crtc == crtc)
- return true;
-
- return false;
+ return ret;
}
static void
-intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
+intel_modeset_update_crtc_state(struct drm_atomic_state *state)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_encoder *intel_encoder;
- struct intel_crtc *intel_crtc;
- struct drm_connector *connector;
-
- intel_shared_dpll_commit(dev_priv);
-
- for_each_intel_encoder(dev, intel_encoder) {
- if (!intel_encoder->base.crtc)
- continue;
-
- intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
-
- if (prepare_pipes & (1 << intel_crtc->pipe))
- intel_encoder->connectors_active = false;
- }
-
- intel_modeset_commit_output_state(dev);
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ int i;
/* Double check state. */
- for_each_intel_crtc(dev, intel_crtc) {
- WARN_ON(intel_crtc->base.state->enable != intel_crtc_in_use(&intel_crtc->base));
- WARN_ON(intel_crtc->new_config &&
- intel_crtc->new_config != intel_crtc->config);
- WARN_ON(intel_crtc->base.state->enable != !!intel_crtc->new_config);
- }
-
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (!connector->encoder || !connector->encoder->crtc)
- continue;
-
- intel_crtc = to_intel_crtc(connector->encoder->crtc);
-
- if (prepare_pipes & (1 << intel_crtc->pipe)) {
- struct drm_property *dpms_property =
- dev->mode_config.dpms_property;
-
- connector->dpms = DRM_MODE_DPMS_ON;
- drm_object_property_set_value(&connector->base,
- dpms_property,
- DRM_MODE_DPMS_ON);
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
- intel_encoder = to_intel_encoder(connector->encoder);
- intel_encoder->connectors_active = true;
- }
+ /* Update hwmode for vblank functions */
+ if (crtc->state->active)
+ crtc->hwmode = crtc->state->adjusted_mode;
+ else
+ crtc->hwmode.crtc_clock = 0;
}
-
}
static bool intel_fuzzy_clock_check(int clock1, int clock2)
base.head) \
if (mask & (1 <<(intel_crtc)->pipe))
+static bool
+intel_compare_m_n(unsigned int m, unsigned int n,
+ unsigned int m2, unsigned int n2,
+ bool exact)
+{
+ if (m == m2 && n == n2)
+ return true;
+
+ if (exact || !m || !n || !m2 || !n2)
+ return false;
+
+ BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX);
+
+ if (m > m2) {
+ while (m > m2) {
+ m2 <<= 1;
+ n2 <<= 1;
+ }
+ } else if (m < m2) {
+ while (m < m2) {
+ m <<= 1;
+ n <<= 1;
+ }
+ }
+
+ return m == m2 && n == n2;
+}
+
+static bool
+intel_compare_link_m_n(const struct intel_link_m_n *m_n,
+ struct intel_link_m_n *m2_n2,
+ bool adjust)
+{
+ if (m_n->tu == m2_n2->tu &&
+ intel_compare_m_n(m_n->gmch_m, m_n->gmch_n,
+ m2_n2->gmch_m, m2_n2->gmch_n, !adjust) &&
+ intel_compare_m_n(m_n->link_m, m_n->link_n,
+ m2_n2->link_m, m2_n2->link_n, !adjust)) {
+ if (adjust)
+ *m2_n2 = *m_n;
+
+ return true;
+ }
+
+ return false;
+}
+
static bool
intel_pipe_config_compare(struct drm_device *dev,
struct intel_crtc_state *current_config,
- struct intel_crtc_state *pipe_config)
+ struct intel_crtc_state *pipe_config,
+ bool adjust)
{
+ bool ret = true;
+
+#define INTEL_ERR_OR_DBG_KMS(fmt, ...) \
+ do { \
+ if (!adjust) \
+ DRM_ERROR(fmt, ##__VA_ARGS__); \
+ else \
+ DRM_DEBUG_KMS(fmt, ##__VA_ARGS__); \
+ } while (0)
+
#define PIPE_CONF_CHECK_X(name) \
if (current_config->name != pipe_config->name) { \
- DRM_ERROR("mismatch in " #name " " \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
"(expected 0x%08x, found 0x%08x)\n", \
current_config->name, \
pipe_config->name); \
- return false; \
+ ret = false; \
}
#define PIPE_CONF_CHECK_I(name) \
if (current_config->name != pipe_config->name) { \
- DRM_ERROR("mismatch in " #name " " \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
"(expected %i, found %i)\n", \
current_config->name, \
pipe_config->name); \
- return false; \
+ ret = false; \
+ }
+
+#define PIPE_CONF_CHECK_M_N(name) \
+ if (!intel_compare_link_m_n(¤t_config->name, \
+ &pipe_config->name,\
+ adjust)) { \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
+ "(expected tu %i gmch %i/%i link %i/%i, " \
+ "found tu %i, gmch %i/%i link %i/%i)\n", \
+ current_config->name.tu, \
+ current_config->name.gmch_m, \
+ current_config->name.gmch_n, \
+ current_config->name.link_m, \
+ current_config->name.link_n, \
+ pipe_config->name.tu, \
+ pipe_config->name.gmch_m, \
+ pipe_config->name.gmch_n, \
+ pipe_config->name.link_m, \
+ pipe_config->name.link_n); \
+ ret = false; \
+ }
+
+#define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) \
+ if (!intel_compare_link_m_n(¤t_config->name, \
+ &pipe_config->name, adjust) && \
+ !intel_compare_link_m_n(¤t_config->alt_name, \
+ &pipe_config->name, adjust)) { \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
+ "(expected tu %i gmch %i/%i link %i/%i, " \
+ "or tu %i gmch %i/%i link %i/%i, " \
+ "found tu %i, gmch %i/%i link %i/%i)\n", \
+ current_config->name.tu, \
+ current_config->name.gmch_m, \
+ current_config->name.gmch_n, \
+ current_config->name.link_m, \
+ current_config->name.link_n, \
+ current_config->alt_name.tu, \
+ current_config->alt_name.gmch_m, \
+ current_config->alt_name.gmch_n, \
+ current_config->alt_name.link_m, \
+ current_config->alt_name.link_n, \
+ pipe_config->name.tu, \
+ pipe_config->name.gmch_m, \
+ pipe_config->name.gmch_n, \
+ pipe_config->name.link_m, \
+ pipe_config->name.link_n); \
+ ret = false; \
}
/* This is required for BDW+ where there is only one set of registers for
#define PIPE_CONF_CHECK_I_ALT(name, alt_name) \
if ((current_config->name != pipe_config->name) && \
(current_config->alt_name != pipe_config->name)) { \
- DRM_ERROR("mismatch in " #name " " \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
"(expected %i or %i, found %i)\n", \
current_config->name, \
current_config->alt_name, \
pipe_config->name); \
- return false; \
+ ret = false; \
}
#define PIPE_CONF_CHECK_FLAGS(name, mask) \
if ((current_config->name ^ pipe_config->name) & (mask)) { \
- DRM_ERROR("mismatch in " #name "(" #mask ") " \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name "(" #mask ") " \
"(expected %i, found %i)\n", \
current_config->name & (mask), \
pipe_config->name & (mask)); \
- return false; \
+ ret = false; \
}
#define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
- DRM_ERROR("mismatch in " #name " " \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
"(expected %i, found %i)\n", \
current_config->name, \
pipe_config->name); \
- return false; \
+ ret = false; \
}
#define PIPE_CONF_QUIRK(quirk) \
PIPE_CONF_CHECK_I(has_pch_encoder);
PIPE_CONF_CHECK_I(fdi_lanes);
- PIPE_CONF_CHECK_I(fdi_m_n.gmch_m);
- PIPE_CONF_CHECK_I(fdi_m_n.gmch_n);
- PIPE_CONF_CHECK_I(fdi_m_n.link_m);
- PIPE_CONF_CHECK_I(fdi_m_n.link_n);
- PIPE_CONF_CHECK_I(fdi_m_n.tu);
+ PIPE_CONF_CHECK_M_N(fdi_m_n);
PIPE_CONF_CHECK_I(has_dp_encoder);
+ PIPE_CONF_CHECK_I(lane_count);
if (INTEL_INFO(dev)->gen < 8) {
- PIPE_CONF_CHECK_I(dp_m_n.gmch_m);
- PIPE_CONF_CHECK_I(dp_m_n.gmch_n);
- PIPE_CONF_CHECK_I(dp_m_n.link_m);
- PIPE_CONF_CHECK_I(dp_m_n.link_n);
- PIPE_CONF_CHECK_I(dp_m_n.tu);
-
- if (current_config->has_drrs) {
- PIPE_CONF_CHECK_I(dp_m2_n2.gmch_m);
- PIPE_CONF_CHECK_I(dp_m2_n2.gmch_n);
- PIPE_CONF_CHECK_I(dp_m2_n2.link_m);
- PIPE_CONF_CHECK_I(dp_m2_n2.link_n);
- PIPE_CONF_CHECK_I(dp_m2_n2.tu);
- }
- } else {
- PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_m, dp_m2_n2.gmch_m);
- PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_n, dp_m2_n2.gmch_n);
- PIPE_CONF_CHECK_I_ALT(dp_m_n.link_m, dp_m2_n2.link_m);
- PIPE_CONF_CHECK_I_ALT(dp_m_n.link_n, dp_m2_n2.link_n);
- PIPE_CONF_CHECK_I_ALT(dp_m_n.tu, dp_m2_n2.tu);
- }
+ PIPE_CONF_CHECK_M_N(dp_m_n);
+
+ if (current_config->has_drrs)
+ PIPE_CONF_CHECK_M_N(dp_m2_n2);
+ } else
+ PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2);
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay);
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal);
DRM_MODE_FLAG_NVSYNC);
}
- PIPE_CONF_CHECK_I(pipe_src_w);
- PIPE_CONF_CHECK_I(pipe_src_h);
+ PIPE_CONF_CHECK_X(gmch_pfit.control);
+ /* pfit ratios are autocomputed by the hw on gen4+ */
+ if (INTEL_INFO(dev)->gen < 4)
+ PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
+ PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits);
- /*
- * FIXME: BIOS likes to set up a cloned config with lvds+external
- * screen. Since we don't yet re-compute the pipe config when moving
- * just the lvds port away to another pipe the sw tracking won't match.
- *
- * Proper atomic modesets with recomputed global state will fix this.
- * Until then just don't check gmch state for inherited modes.
- */
- if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_INHERITED_MODE)) {
- PIPE_CONF_CHECK_I(gmch_pfit.control);
- /* pfit ratios are autocomputed by the hw on gen4+ */
- if (INTEL_INFO(dev)->gen < 4)
- PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
- PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
- }
+ if (!adjust) {
+ PIPE_CONF_CHECK_I(pipe_src_w);
+ PIPE_CONF_CHECK_I(pipe_src_h);
+
+ PIPE_CONF_CHECK_I(pch_pfit.enabled);
+ if (current_config->pch_pfit.enabled) {
+ PIPE_CONF_CHECK_X(pch_pfit.pos);
+ PIPE_CONF_CHECK_X(pch_pfit.size);
+ }
- PIPE_CONF_CHECK_I(pch_pfit.enabled);
- if (current_config->pch_pfit.enabled) {
- PIPE_CONF_CHECK_I(pch_pfit.pos);
- PIPE_CONF_CHECK_I(pch_pfit.size);
+ PIPE_CONF_CHECK_I(scaler_state.scaler_id);
}
/* BDW+ don't expose a synchronous way to read the state */
PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
PIPE_CONF_CHECK_X(dpll_hw_state.wrpll);
+ PIPE_CONF_CHECK_X(dpll_hw_state.spll);
PIPE_CONF_CHECK_X(dpll_hw_state.ctrl1);
PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr1);
PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr2);
#undef PIPE_CONF_CHECK_FLAGS
#undef PIPE_CONF_CHECK_CLOCK_FUZZY
#undef PIPE_CONF_QUIRK
+#undef INTEL_ERR_OR_DBG_KMS
- return true;
+ return ret;
}
static void check_wm_state(struct drm_device *dev)
}
/* cursor */
- hw_entry = &hw_ddb.cursor[pipe];
- sw_entry = &sw_ddb->cursor[pipe];
+ hw_entry = &hw_ddb.plane[pipe][PLANE_CURSOR];
+ sw_entry = &sw_ddb->plane[pipe][PLANE_CURSOR];
if (skl_ddb_entry_equal(hw_entry, sw_entry))
continue;
}
static void
-check_connector_state(struct drm_device *dev)
+check_connector_state(struct drm_device *dev,
+ struct drm_atomic_state *old_state)
{
- struct intel_connector *connector;
+ struct drm_connector_state *old_conn_state;
+ struct drm_connector *connector;
+ int i;
+
+ for_each_connector_in_state(old_state, connector, old_conn_state, i) {
+ struct drm_encoder *encoder = connector->encoder;
+ struct drm_connector_state *state = connector->state;
- for_each_intel_connector(dev, connector) {
/* This also checks the encoder/connector hw state with the
* ->get_hw_state callbacks. */
- intel_connector_check_state(connector);
+ intel_connector_check_state(to_intel_connector(connector));
- I915_STATE_WARN(&connector->new_encoder->base != connector->base.encoder,
- "connector's staged encoder doesn't match current encoder\n");
+ I915_STATE_WARN(state->best_encoder != encoder,
+ "connector's atomic encoder doesn't match legacy encoder\n");
}
}
for_each_intel_encoder(dev, encoder) {
bool enabled = false;
- bool active = false;
- enum pipe pipe, tracked_pipe;
+ enum pipe pipe;
DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
encoder->base.base.id,
encoder->base.name);
- I915_STATE_WARN(&encoder->new_crtc->base != encoder->base.crtc,
- "encoder's stage crtc doesn't match current crtc\n");
- I915_STATE_WARN(encoder->connectors_active && !encoder->base.crtc,
- "encoder's active_connectors set, but no crtc\n");
-
for_each_intel_connector(dev, connector) {
- if (connector->base.encoder != &encoder->base)
+ if (connector->base.state->best_encoder != &encoder->base)
continue;
enabled = true;
- if (connector->base.dpms != DRM_MODE_DPMS_OFF)
- active = true;
+
+ I915_STATE_WARN(connector->base.state->crtc !=
+ encoder->base.crtc,
+ "connector's crtc doesn't match encoder crtc\n");
}
- /*
- * for MST connectors if we unplug the connector is gone
- * away but the encoder is still connected to a crtc
- * until a modeset happens in response to the hotplug.
- */
- if (!enabled && encoder->base.encoder_type == DRM_MODE_ENCODER_DPMST)
- continue;
I915_STATE_WARN(!!encoder->base.crtc != enabled,
"encoder's enabled state mismatch "
"(expected %i, found %i)\n",
!!encoder->base.crtc, enabled);
- I915_STATE_WARN(active && !encoder->base.crtc,
- "active encoder with no crtc\n");
- I915_STATE_WARN(encoder->connectors_active != active,
- "encoder's computed active state doesn't match tracked active state "
- "(expected %i, found %i)\n", active, encoder->connectors_active);
-
- active = encoder->get_hw_state(encoder, &pipe);
- I915_STATE_WARN(active != encoder->connectors_active,
- "encoder's hw state doesn't match sw tracking "
- "(expected %i, found %i)\n",
- encoder->connectors_active, active);
-
- if (!encoder->base.crtc)
- continue;
-
- tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
- I915_STATE_WARN(active && pipe != tracked_pipe,
- "active encoder's pipe doesn't match"
- "(expected %i, found %i)\n",
- tracked_pipe, pipe);
+ if (!encoder->base.crtc) {
+ bool active;
+ active = encoder->get_hw_state(encoder, &pipe);
+ I915_STATE_WARN(active,
+ "encoder detached but still enabled on pipe %c.\n",
+ pipe_name(pipe));
+ }
}
}
static void
-check_crtc_state(struct drm_device *dev)
+check_crtc_state(struct drm_device *dev, struct drm_atomic_state *old_state)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *crtc;
struct intel_encoder *encoder;
- struct intel_crtc_state pipe_config;
+ struct drm_crtc_state *old_crtc_state;
+ struct drm_crtc *crtc;
+ int i;
- for_each_intel_crtc(dev, crtc) {
- bool enabled = false;
- bool active = false;
+ for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_crtc_state *pipe_config, *sw_config;
+ bool active;
+
+ if (!needs_modeset(crtc->state) &&
+ !to_intel_crtc_state(crtc->state)->update_pipe)
+ continue;
- memset(&pipe_config, 0, sizeof(pipe_config));
+ __drm_atomic_helper_crtc_destroy_state(crtc, old_crtc_state);
+ pipe_config = to_intel_crtc_state(old_crtc_state);
+ memset(pipe_config, 0, sizeof(*pipe_config));
+ pipe_config->base.crtc = crtc;
+ pipe_config->base.state = old_state;
DRM_DEBUG_KMS("[CRTC:%d]\n",
- crtc->base.base.id);
-
- I915_STATE_WARN(crtc->active && !crtc->base.state->enable,
- "active crtc, but not enabled in sw tracking\n");
+ crtc->base.id);
- for_each_intel_encoder(dev, encoder) {
- if (encoder->base.crtc != &crtc->base)
- continue;
- enabled = true;
- if (encoder->connectors_active)
- active = true;
- }
+ active = dev_priv->display.get_pipe_config(intel_crtc,
+ pipe_config);
- I915_STATE_WARN(active != crtc->active,
- "crtc's computed active state doesn't match tracked active state "
- "(expected %i, found %i)\n", active, crtc->active);
- I915_STATE_WARN(enabled != crtc->base.state->enable,
- "crtc's computed enabled state doesn't match tracked enabled state "
- "(expected %i, found %i)\n", enabled,
- crtc->base.state->enable);
+ /* hw state is inconsistent with the pipe quirk */
+ if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
+ (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
+ active = crtc->state->active;
- active = dev_priv->display.get_pipe_config(crtc,
- &pipe_config);
+ I915_STATE_WARN(crtc->state->active != active,
+ "crtc active state doesn't match with hw state "
+ "(expected %i, found %i)\n", crtc->state->active, active);
- /* hw state is inconsistent with the pipe quirk */
- if ((crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
- (crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
- active = crtc->active;
+ I915_STATE_WARN(intel_crtc->active != crtc->state->active,
+ "transitional active state does not match atomic hw state "
+ "(expected %i, found %i)\n", crtc->state->active, intel_crtc->active);
- for_each_intel_encoder(dev, encoder) {
+ for_each_encoder_on_crtc(dev, crtc, encoder) {
enum pipe pipe;
- if (encoder->base.crtc != &crtc->base)
- continue;
- if (encoder->get_hw_state(encoder, &pipe))
- encoder->get_config(encoder, &pipe_config);
+
+ active = encoder->get_hw_state(encoder, &pipe);
+ I915_STATE_WARN(active != crtc->state->active,
+ "[ENCODER:%i] active %i with crtc active %i\n",
+ encoder->base.base.id, active, crtc->state->active);
+
+ I915_STATE_WARN(active && intel_crtc->pipe != pipe,
+ "Encoder connected to wrong pipe %c\n",
+ pipe_name(pipe));
+
+ if (active)
+ encoder->get_config(encoder, pipe_config);
}
- I915_STATE_WARN(crtc->active != active,
- "crtc active state doesn't match with hw state "
- "(expected %i, found %i)\n", crtc->active, active);
+ if (!crtc->state->active)
+ continue;
- if (active &&
- !intel_pipe_config_compare(dev, crtc->config, &pipe_config)) {
+ sw_config = to_intel_crtc_state(crtc->state);
+ if (!intel_pipe_config_compare(dev, sw_config,
+ pipe_config, false)) {
I915_STATE_WARN(1, "pipe state doesn't match!\n");
- intel_dump_pipe_config(crtc, &pipe_config,
+ intel_dump_pipe_config(intel_crtc, pipe_config,
"[hw state]");
- intel_dump_pipe_config(crtc, crtc->config,
+ intel_dump_pipe_config(intel_crtc, sw_config,
"[sw state]");
}
}
}
}
-void
-intel_modeset_check_state(struct drm_device *dev)
+static void
+intel_modeset_check_state(struct drm_device *dev,
+ struct drm_atomic_state *old_state)
{
check_wm_state(dev);
- check_connector_state(dev);
+ check_connector_state(dev, old_state);
check_encoder_state(dev);
- check_crtc_state(dev);
+ check_crtc_state(dev, old_state);
check_shared_dpll_state(dev);
}
* one to the value.
*/
if (IS_GEN2(dev)) {
- const struct drm_display_mode *mode = &crtc->config->base.adjusted_mode;
+ const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
int vtotal;
- vtotal = mode->crtc_vtotal;
- if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ vtotal = adjusted_mode->crtc_vtotal;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
vtotal /= 2;
crtc->scanline_offset = vtotal - 1;
crtc->scanline_offset = 1;
}
-static struct intel_crtc_state *
-intel_modeset_compute_config(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_framebuffer *fb,
- struct drm_atomic_state *state,
- unsigned *modeset_pipes,
- unsigned *prepare_pipes,
- unsigned *disable_pipes)
-{
- struct drm_device *dev = crtc->dev;
- struct intel_crtc_state *pipe_config = NULL;
- struct intel_crtc *intel_crtc;
- int ret = 0;
-
- ret = drm_atomic_add_affected_connectors(state, crtc);
- if (ret)
- return ERR_PTR(ret);
-
- intel_modeset_affected_pipes(crtc, modeset_pipes,
- prepare_pipes, disable_pipes);
-
- for_each_intel_crtc_masked(dev, *disable_pipes, intel_crtc) {
- pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
- if (IS_ERR(pipe_config))
- return pipe_config;
-
- pipe_config->base.enable = false;
- }
-
- /*
- * Note this needs changes when we start tracking multiple modes
- * and crtcs. At that point we'll need to compute the whole config
- * (i.e. one pipe_config for each crtc) rather than just the one
- * for this crtc.
- */
- for_each_intel_crtc_masked(dev, *modeset_pipes, intel_crtc) {
- /* FIXME: For now we still expect modeset_pipes has at most
- * one bit set. */
- if (WARN_ON(&intel_crtc->base != crtc))
- continue;
-
- pipe_config = intel_modeset_pipe_config(crtc, fb, mode, state);
- if (IS_ERR(pipe_config))
- return pipe_config;
-
- intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
- "[modeset]");
- }
-
- return intel_atomic_get_crtc_state(state, to_intel_crtc(crtc));;
-}
-
-static int __intel_set_mode_setup_plls(struct drm_device *dev,
- unsigned modeset_pipes,
- unsigned disable_pipes)
+static void intel_modeset_clear_plls(struct drm_atomic_state *state)
{
+ struct drm_device *dev = state->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
- unsigned clear_pipes = modeset_pipes | disable_pipes;
+ struct intel_shared_dpll_config *shared_dpll = NULL;
struct intel_crtc *intel_crtc;
- int ret = 0;
+ struct intel_crtc_state *intel_crtc_state;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ int i;
if (!dev_priv->display.crtc_compute_clock)
- return 0;
-
- ret = intel_shared_dpll_start_config(dev_priv, clear_pipes);
- if (ret)
- goto done;
-
- for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
- struct intel_crtc_state *state = intel_crtc->new_config;
- ret = dev_priv->display.crtc_compute_clock(intel_crtc,
- state);
- if (ret) {
- intel_shared_dpll_abort_config(dev_priv);
- goto done;
- }
- }
-
-done:
- return ret;
-}
-
-static int __intel_set_mode(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- int x, int y, struct drm_framebuffer *fb,
- struct intel_crtc_state *pipe_config,
- unsigned modeset_pipes,
- unsigned prepare_pipes,
- unsigned disable_pipes)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_display_mode *saved_mode;
- struct intel_crtc_state *crtc_state_copy = NULL;
- struct intel_crtc *intel_crtc;
- int ret = 0;
-
- saved_mode = kmalloc(sizeof(*saved_mode), GFP_KERNEL);
- if (!saved_mode)
- return -ENOMEM;
-
- crtc_state_copy = kmalloc(sizeof(*crtc_state_copy), GFP_KERNEL);
- if (!crtc_state_copy) {
- ret = -ENOMEM;
- goto done;
- }
-
- *saved_mode = crtc->mode;
-
- if (modeset_pipes)
- to_intel_crtc(crtc)->new_config = pipe_config;
-
- /*
- * See if the config requires any additional preparation, e.g.
- * to adjust global state with pipes off. We need to do this
- * here so we can get the modeset_pipe updated config for the new
- * mode set on this crtc. For other crtcs we need to use the
- * adjusted_mode bits in the crtc directly.
- */
- if (IS_VALLEYVIEW(dev)) {
- valleyview_modeset_global_pipes(dev, &prepare_pipes);
-
- /* may have added more to prepare_pipes than we should */
- prepare_pipes &= ~disable_pipes;
- }
-
- ret = __intel_set_mode_setup_plls(dev, modeset_pipes, disable_pipes);
- if (ret)
- goto done;
-
- for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
- intel_crtc_disable(&intel_crtc->base);
-
- for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
- if (intel_crtc->base.state->enable)
- dev_priv->display.crtc_disable(&intel_crtc->base);
- }
-
- /* crtc->mode is already used by the ->mode_set callbacks, hence we need
- * to set it here already despite that we pass it down the callchain.
- *
- * Note we'll need to fix this up when we start tracking multiple
- * pipes; here we assume a single modeset_pipe and only track the
- * single crtc and mode.
- */
- if (modeset_pipes) {
- crtc->mode = *mode;
- /* mode_set/enable/disable functions rely on a correct pipe
- * config. */
- intel_crtc_set_state(to_intel_crtc(crtc), pipe_config);
-
- /*
- * Calculate and store various constants which
- * are later needed by vblank and swap-completion
- * timestamping. They are derived from true hwmode.
- */
- drm_calc_timestamping_constants(crtc,
- &pipe_config->base.adjusted_mode);
- }
-
- /* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
- intel_modeset_update_state(dev, prepare_pipes);
-
- modeset_update_crtc_power_domains(pipe_config->base.state);
-
- /* Set up the DPLL and any encoders state that needs to adjust or depend
- * on the DPLL.
- */
- for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
- struct drm_plane *primary = intel_crtc->base.primary;
- int vdisplay, hdisplay;
-
- drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
- ret = primary->funcs->update_plane(primary, &intel_crtc->base,
- fb, 0, 0,
- hdisplay, vdisplay,
- x << 16, y << 16,
- hdisplay << 16, vdisplay << 16);
- }
-
- /* Now enable the clocks, plane, pipe, and connectors that we set up. */
- for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
- update_scanline_offset(intel_crtc);
-
- dev_priv->display.crtc_enable(&intel_crtc->base);
- }
-
- /* FIXME: add subpixel order */
-done:
- if (ret && crtc->state->enable)
- crtc->mode = *saved_mode;
-
- if (ret == 0 && pipe_config) {
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
- /* The pipe_config will be freed with the atomic state, so
- * make a copy. */
- memcpy(crtc_state_copy, intel_crtc->config,
- sizeof *crtc_state_copy);
- intel_crtc->config = crtc_state_copy;
- intel_crtc->base.state = &crtc_state_copy->base;
-
- if (modeset_pipes)
- intel_crtc->new_config = intel_crtc->config;
- } else {
- kfree(crtc_state_copy);
- }
-
- kfree(saved_mode);
- return ret;
-}
-
-static int intel_set_mode_pipes(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- int x, int y, struct drm_framebuffer *fb,
- struct intel_crtc_state *pipe_config,
- unsigned modeset_pipes,
- unsigned prepare_pipes,
- unsigned disable_pipes)
-{
- int ret;
+ return;
- ret = __intel_set_mode(crtc, mode, x, y, fb, pipe_config, modeset_pipes,
- prepare_pipes, disable_pipes);
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ int dpll;
- if (ret == 0)
- intel_modeset_check_state(crtc->dev);
+ intel_crtc = to_intel_crtc(crtc);
+ intel_crtc_state = to_intel_crtc_state(crtc_state);
+ dpll = intel_crtc_state->shared_dpll;
- return ret;
-}
+ if (!needs_modeset(crtc_state) || dpll == DPLL_ID_PRIVATE)
+ continue;
-static int intel_set_mode(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- int x, int y, struct drm_framebuffer *fb,
- struct drm_atomic_state *state)
-{
- struct intel_crtc_state *pipe_config;
- unsigned modeset_pipes, prepare_pipes, disable_pipes;
- int ret = 0;
+ intel_crtc_state->shared_dpll = DPLL_ID_PRIVATE;
- pipe_config = intel_modeset_compute_config(crtc, mode, fb, state,
- &modeset_pipes,
- &prepare_pipes,
- &disable_pipes);
+ if (!shared_dpll)
+ shared_dpll = intel_atomic_get_shared_dpll_state(state);
- if (IS_ERR(pipe_config)) {
- ret = PTR_ERR(pipe_config);
- goto out;
+ shared_dpll[dpll].crtc_mask &= ~(1 << intel_crtc->pipe);
}
-
- ret = intel_set_mode_pipes(crtc, mode, x, y, fb, pipe_config,
- modeset_pipes, prepare_pipes,
- disable_pipes);
- if (ret)
- goto out;
-
-out:
- return ret;
}
-void intel_crtc_restore_mode(struct drm_crtc *crtc)
+/*
+ * This implements the workaround described in the "notes" section of the mode
+ * set sequence documentation. When going from no pipes or single pipe to
+ * multiple pipes, and planes are enabled after the pipe, we need to wait at
+ * least 2 vblanks on the first pipe before enabling planes on the second pipe.
+ */
+static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
{
- struct drm_device *dev = crtc->dev;
- struct drm_atomic_state *state;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
- struct drm_connector_state *connector_state;
-
- state = drm_atomic_state_alloc(dev);
- if (!state) {
- DRM_DEBUG_KMS("[CRTC:%d] mode restore failed, out of memory",
- crtc->base.id);
- return;
- }
+ struct drm_crtc_state *crtc_state;
+ struct intel_crtc *intel_crtc;
+ struct drm_crtc *crtc;
+ struct intel_crtc_state *first_crtc_state = NULL;
+ struct intel_crtc_state *other_crtc_state = NULL;
+ enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
+ int i;
- state->acquire_ctx = dev->mode_config.acquire_ctx;
+ /* look at all crtc's that are going to be enabled in during modeset */
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ intel_crtc = to_intel_crtc(crtc);
- /* The force restore path in the HW readout code relies on the staged
- * config still keeping the user requested config while the actual
- * state has been overwritten by the configuration read from HW. We
- * need to copy the staged config to the atomic state, otherwise the
- * mode set will just reapply the state the HW is already in. */
- for_each_intel_encoder(dev, encoder) {
- if (&encoder->new_crtc->base != crtc)
+ if (!crtc_state->active || !needs_modeset(crtc_state))
continue;
- for_each_intel_connector(dev, connector) {
- if (connector->new_encoder != encoder)
- continue;
-
- connector_state = drm_atomic_get_connector_state(state, &connector->base);
- if (IS_ERR(connector_state)) {
- DRM_DEBUG_KMS("Failed to add [CONNECTOR:%d:%s] to state: %ld\n",
- connector->base.base.id,
- connector->base.name,
- PTR_ERR(connector_state));
- continue;
- }
-
- connector_state->crtc = crtc;
- connector_state->best_encoder = &encoder->base;
+ if (first_crtc_state) {
+ other_crtc_state = to_intel_crtc_state(crtc_state);
+ break;
+ } else {
+ first_crtc_state = to_intel_crtc_state(crtc_state);
+ first_pipe = intel_crtc->pipe;
}
}
- intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->primary->fb,
- state);
-
- drm_atomic_state_free(state);
-}
-
-#undef for_each_intel_crtc_masked
-
-static void intel_set_config_free(struct intel_set_config *config)
-{
- if (!config)
- return;
-
- kfree(config->save_connector_encoders);
- kfree(config->save_encoder_crtcs);
- kfree(config->save_crtc_enabled);
- kfree(config);
-}
+ /* No workaround needed? */
+ if (!first_crtc_state)
+ return 0;
-static int intel_set_config_save_state(struct drm_device *dev,
- struct intel_set_config *config)
-{
- struct drm_crtc *crtc;
- struct drm_encoder *encoder;
- struct drm_connector *connector;
- int count;
+ /* w/a possibly needed, check how many crtc's are already enabled. */
+ for_each_intel_crtc(state->dev, intel_crtc) {
+ struct intel_crtc_state *pipe_config;
- config->save_crtc_enabled =
- kcalloc(dev->mode_config.num_crtc,
- sizeof(bool), GFP_KERNEL);
- if (!config->save_crtc_enabled)
- return -ENOMEM;
+ pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
+ if (IS_ERR(pipe_config))
+ return PTR_ERR(pipe_config);
- config->save_encoder_crtcs =
- kcalloc(dev->mode_config.num_encoder,
- sizeof(struct drm_crtc *), GFP_KERNEL);
- if (!config->save_encoder_crtcs)
- return -ENOMEM;
+ pipe_config->hsw_workaround_pipe = INVALID_PIPE;
- config->save_connector_encoders =
- kcalloc(dev->mode_config.num_connector,
- sizeof(struct drm_encoder *), GFP_KERNEL);
- if (!config->save_connector_encoders)
- return -ENOMEM;
+ if (!pipe_config->base.active ||
+ needs_modeset(&pipe_config->base))
+ continue;
- /* Copy data. Note that driver private data is not affected.
- * Should anything bad happen only the expected state is
- * restored, not the drivers personal bookkeeping.
- */
- count = 0;
- for_each_crtc(dev, crtc) {
- config->save_crtc_enabled[count++] = crtc->state->enable;
- }
+ /* 2 or more enabled crtcs means no need for w/a */
+ if (enabled_pipe != INVALID_PIPE)
+ return 0;
- count = 0;
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- config->save_encoder_crtcs[count++] = encoder->crtc;
+ enabled_pipe = intel_crtc->pipe;
}
- count = 0;
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- config->save_connector_encoders[count++] = connector->encoder;
- }
+ if (enabled_pipe != INVALID_PIPE)
+ first_crtc_state->hsw_workaround_pipe = enabled_pipe;
+ else if (other_crtc_state)
+ other_crtc_state->hsw_workaround_pipe = first_pipe;
return 0;
}
-static void intel_set_config_restore_state(struct drm_device *dev,
- struct intel_set_config *config)
+static int intel_modeset_all_pipes(struct drm_atomic_state *state)
{
- struct intel_crtc *crtc;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
- int count;
-
- count = 0;
- for_each_intel_crtc(dev, crtc) {
- crtc->new_enabled = config->save_crtc_enabled[count++];
-
- if (crtc->new_enabled)
- crtc->new_config = crtc->config;
- else
- crtc->new_config = NULL;
- }
-
- count = 0;
- for_each_intel_encoder(dev, encoder) {
- encoder->new_crtc =
- to_intel_crtc(config->save_encoder_crtcs[count++]);
- }
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ int ret = 0;
- count = 0;
- for_each_intel_connector(dev, connector) {
- connector->new_encoder =
- to_intel_encoder(config->save_connector_encoders[count++]);
- }
-}
+ /* add all active pipes to the state */
+ for_each_crtc(state->dev, crtc) {
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
-static bool
-is_crtc_connector_off(struct drm_mode_set *set)
-{
- int i;
+ if (!crtc_state->active || needs_modeset(crtc_state))
+ continue;
- if (set->num_connectors == 0)
- return false;
+ crtc_state->mode_changed = true;
- if (WARN_ON(set->connectors == NULL))
- return false;
+ ret = drm_atomic_add_affected_connectors(state, crtc);
+ if (ret)
+ break;
- for (i = 0; i < set->num_connectors; i++)
- if (set->connectors[i]->encoder &&
- set->connectors[i]->encoder->crtc == set->crtc &&
- set->connectors[i]->dpms != DRM_MODE_DPMS_ON)
- return true;
+ ret = drm_atomic_add_affected_planes(state, crtc);
+ if (ret)
+ break;
+ }
- return false;
+ return ret;
}
-static void
-intel_set_config_compute_mode_changes(struct drm_mode_set *set,
- struct intel_set_config *config)
+static int intel_modeset_checks(struct drm_atomic_state *state)
{
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret;
- /* We should be able to check here if the fb has the same properties
- * and then just flip_or_move it */
- if (is_crtc_connector_off(set)) {
- config->mode_changed = true;
- } else if (set->crtc->primary->fb != set->fb) {
- /*
- * If we have no fb, we can only flip as long as the crtc is
- * active, otherwise we need a full mode set. The crtc may
- * be active if we've only disabled the primary plane, or
- * in fastboot situations.
- */
- if (set->crtc->primary->fb == NULL) {
- struct intel_crtc *intel_crtc =
- to_intel_crtc(set->crtc);
-
- if (intel_crtc->active) {
- DRM_DEBUG_KMS("crtc has no fb, will flip\n");
- config->fb_changed = true;
- } else {
- DRM_DEBUG_KMS("inactive crtc, full mode set\n");
- config->mode_changed = true;
- }
- } else if (set->fb == NULL) {
- config->mode_changed = true;
- } else if (set->fb->pixel_format !=
- set->crtc->primary->fb->pixel_format) {
- config->mode_changed = true;
- } else {
- config->fb_changed = true;
- }
+ if (!check_digital_port_conflicts(state)) {
+ DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n");
+ return -EINVAL;
}
- if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
- config->fb_changed = true;
-
- if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
- DRM_DEBUG_KMS("modes are different, full mode set\n");
- drm_mode_debug_printmodeline(&set->crtc->mode);
- drm_mode_debug_printmodeline(set->mode);
- config->mode_changed = true;
- }
+ /*
+ * See if the config requires any additional preparation, e.g.
+ * to adjust global state with pipes off. We need to do this
+ * here so we can get the modeset_pipe updated config for the new
+ * mode set on this crtc. For other crtcs we need to use the
+ * adjusted_mode bits in the crtc directly.
+ */
+ if (dev_priv->display.modeset_calc_cdclk) {
+ unsigned int cdclk;
- DRM_DEBUG_KMS("computed changes for [CRTC:%d], mode_changed=%d, fb_changed=%d\n",
- set->crtc->base.id, config->mode_changed, config->fb_changed);
-}
+ ret = dev_priv->display.modeset_calc_cdclk(state);
-static int
-intel_modeset_stage_output_state(struct drm_device *dev,
- struct drm_mode_set *set,
- struct intel_set_config *config,
- struct drm_atomic_state *state)
-{
- struct intel_connector *connector;
- struct drm_connector_state *connector_state;
- struct intel_encoder *encoder;
- struct intel_crtc *crtc;
- int ro;
+ cdclk = to_intel_atomic_state(state)->cdclk;
+ if (!ret && cdclk != dev_priv->cdclk_freq)
+ ret = intel_modeset_all_pipes(state);
- /* The upper layers ensure that we either disable a crtc or have a list
- * of connectors. For paranoia, double-check this. */
- WARN_ON(!set->fb && (set->num_connectors != 0));
- WARN_ON(set->fb && (set->num_connectors == 0));
+ if (ret < 0)
+ return ret;
+ } else
+ to_intel_atomic_state(state)->cdclk = dev_priv->cdclk_freq;
- for_each_intel_connector(dev, connector) {
- /* Otherwise traverse passed in connector list and get encoders
- * for them. */
- for (ro = 0; ro < set->num_connectors; ro++) {
- if (set->connectors[ro] == &connector->base) {
- connector->new_encoder = intel_find_encoder(connector, to_intel_crtc(set->crtc)->pipe);
- break;
- }
- }
+ intel_modeset_clear_plls(state);
- /* If we disable the crtc, disable all its connectors. Also, if
- * the connector is on the changing crtc but not on the new
- * connector list, disable it. */
- if ((!set->fb || ro == set->num_connectors) &&
- connector->base.encoder &&
- connector->base.encoder->crtc == set->crtc) {
- connector->new_encoder = NULL;
+ if (IS_HASWELL(dev))
+ return haswell_mode_set_planes_workaround(state);
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
- connector->base.base.id,
- connector->base.name);
- }
+ return 0;
+}
+/**
+ * intel_atomic_check - validate state object
+ * @dev: drm device
+ * @state: state to validate
+ */
+static int intel_atomic_check(struct drm_device *dev,
+ struct drm_atomic_state *state)
+{
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ int ret, i;
+ bool any_ms = false;
- if (&connector->new_encoder->base != connector->base.encoder) {
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] encoder changed, full mode switch\n",
- connector->base.base.id,
- connector->base.name);
- config->mode_changed = true;
- }
- }
- /* connector->new_encoder is now updated for all connectors. */
+ ret = drm_atomic_helper_check_modeset(dev, state);
+ if (ret)
+ return ret;
- /* Update crtc of enabled connectors. */
- for_each_intel_connector(dev, connector) {
- struct drm_crtc *new_crtc;
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ struct intel_crtc_state *pipe_config =
+ to_intel_crtc_state(crtc_state);
- if (!connector->new_encoder)
- continue;
+ memset(&to_intel_crtc(crtc)->atomic, 0,
+ sizeof(struct intel_crtc_atomic_commit));
- new_crtc = connector->new_encoder->base.crtc;
+ /* Catch I915_MODE_FLAG_INHERITED */
+ if (crtc_state->mode.private_flags != crtc->state->mode.private_flags)
+ crtc_state->mode_changed = true;
- for (ro = 0; ro < set->num_connectors; ro++) {
- if (set->connectors[ro] == &connector->base)
- new_crtc = set->crtc;
+ if (!crtc_state->enable) {
+ if (needs_modeset(crtc_state))
+ any_ms = true;
+ continue;
}
- /* Make sure the new CRTC will work with the encoder */
- if (!drm_encoder_crtc_ok(&connector->new_encoder->base,
- new_crtc)) {
- return -EINVAL;
- }
- connector->new_encoder->new_crtc = to_intel_crtc(new_crtc);
+ if (!needs_modeset(crtc_state))
+ continue;
- connector_state =
- drm_atomic_get_connector_state(state, &connector->base);
- if (IS_ERR(connector_state))
- return PTR_ERR(connector_state);
+ /* FIXME: For only active_changed we shouldn't need to do any
+ * state recomputation at all. */
- connector_state->crtc = new_crtc;
- connector_state->best_encoder = &connector->new_encoder->base;
+ ret = drm_atomic_add_affected_connectors(state, crtc);
+ if (ret)
+ return ret;
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
- connector->base.base.id,
- connector->base.name,
- new_crtc->base.id);
- }
+ ret = intel_modeset_pipe_config(crtc, pipe_config);
+ if (ret)
+ return ret;
- /* Check for any encoders that needs to be disabled. */
- for_each_intel_encoder(dev, encoder) {
- int num_connectors = 0;
- for_each_intel_connector(dev, connector) {
- if (connector->new_encoder == encoder) {
- WARN_ON(!connector->new_encoder->new_crtc);
- num_connectors++;
- }
+ if (i915.fastboot &&
+ intel_pipe_config_compare(state->dev,
+ to_intel_crtc_state(crtc->state),
+ pipe_config, true)) {
+ crtc_state->mode_changed = false;
+ to_intel_crtc_state(crtc_state)->update_pipe = true;
}
- if (num_connectors == 0)
- encoder->new_crtc = NULL;
- else if (num_connectors > 1)
- return -EINVAL;
+ if (needs_modeset(crtc_state)) {
+ any_ms = true;
- /* Only now check for crtc changes so we don't miss encoders
- * that will be disabled. */
- if (&encoder->new_crtc->base != encoder->base.crtc) {
- DRM_DEBUG_KMS("[ENCODER:%d:%s] crtc changed, full mode switch\n",
- encoder->base.base.id,
- encoder->base.name);
- config->mode_changed = true;
+ ret = drm_atomic_add_affected_planes(state, crtc);
+ if (ret)
+ return ret;
}
- }
- /* Now we've also updated encoder->new_crtc for all encoders. */
- for_each_intel_connector(dev, connector) {
- connector_state =
- drm_atomic_get_connector_state(state, &connector->base);
- if (IS_ERR(connector_state))
- return PTR_ERR(connector_state);
- if (connector->new_encoder) {
- if (connector->new_encoder != connector->encoder)
- connector->encoder = connector->new_encoder;
- } else {
- connector_state->crtc = NULL;
- }
+ intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
+ needs_modeset(crtc_state) ?
+ "[modeset]" : "[fastset]");
}
- for_each_intel_crtc(dev, crtc) {
- crtc->new_enabled = false;
-
- for_each_intel_encoder(dev, encoder) {
- if (encoder->new_crtc == crtc) {
- crtc->new_enabled = true;
- break;
- }
- }
- if (crtc->new_enabled != crtc->base.state->enable) {
- DRM_DEBUG_KMS("[CRTC:%d] %sabled, full mode switch\n",
- crtc->base.base.id,
- crtc->new_enabled ? "en" : "dis");
- config->mode_changed = true;
- }
+ if (any_ms) {
+ ret = intel_modeset_checks(state);
- if (crtc->new_enabled)
- crtc->new_config = crtc->config;
- else
- crtc->new_config = NULL;
- }
+ if (ret)
+ return ret;
+ } else
+ to_intel_atomic_state(state)->cdclk =
+ to_i915(state->dev)->cdclk_freq;
- return 0;
+ return drm_atomic_helper_check_planes(state->dev, state);
}
-static void disable_crtc_nofb(struct intel_crtc *crtc)
+/**
+ * intel_atomic_commit - commit validated state object
+ * @dev: DRM device
+ * @state: the top-level driver state object
+ * @async: asynchronous commit
+ *
+ * This function commits a top-level state object that has been validated
+ * with drm_atomic_helper_check().
+ *
+ * FIXME: Atomic modeset support for i915 is not yet complete. At the moment
+ * we can only handle plane-related operations and do not yet support
+ * asynchronous commit.
+ *
+ * RETURNS
+ * Zero for success or -errno.
+ */
+static int intel_atomic_commit(struct drm_device *dev,
+ struct drm_atomic_state *state,
+ bool async)
{
- struct drm_device *dev = crtc->base.dev;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
-
- DRM_DEBUG_KMS("Trying to restore without FB -> disabling pipe %c\n",
- pipe_name(crtc->pipe));
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ int ret = 0;
+ int i;
+ bool any_ms = false;
- for_each_intel_connector(dev, connector) {
- if (connector->new_encoder &&
- connector->new_encoder->new_crtc == crtc)
- connector->new_encoder = NULL;
+ if (async) {
+ DRM_DEBUG_KMS("i915 does not yet support async commit\n");
+ return -EINVAL;
}
- for_each_intel_encoder(dev, encoder) {
- if (encoder->new_crtc == crtc)
- encoder->new_crtc = NULL;
- }
+ ret = drm_atomic_helper_prepare_planes(dev, state);
+ if (ret)
+ return ret;
- crtc->new_enabled = false;
- crtc->new_config = NULL;
-}
+ drm_atomic_helper_swap_state(dev, state);
-static int intel_crtc_set_config(struct drm_mode_set *set)
-{
- struct drm_device *dev;
- struct drm_mode_set save_set;
- struct drm_atomic_state *state = NULL;
- struct intel_set_config *config;
- struct intel_crtc_state *pipe_config;
- unsigned modeset_pipes, prepare_pipes, disable_pipes;
- int ret;
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- BUG_ON(!set);
- BUG_ON(!set->crtc);
- BUG_ON(!set->crtc->helper_private);
+ if (!needs_modeset(crtc->state))
+ continue;
- /* Enforce sane interface api - has been abused by the fb helper. */
- BUG_ON(!set->mode && set->fb);
- BUG_ON(set->fb && set->num_connectors == 0);
+ any_ms = true;
+ intel_pre_plane_update(intel_crtc);
- if (set->fb) {
- DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
- set->crtc->base.id, set->fb->base.id,
- (int)set->num_connectors, set->x, set->y);
- } else {
- DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
+ if (crtc_state->active) {
+ intel_crtc_disable_planes(crtc, crtc_state->plane_mask);
+ dev_priv->display.crtc_disable(crtc);
+ intel_crtc->active = false;
+ intel_disable_shared_dpll(intel_crtc);
+ }
}
- dev = set->crtc->dev;
+ /* Only after disabling all output pipelines that will be changed can we
+ * update the the output configuration. */
+ intel_modeset_update_crtc_state(state);
- ret = -ENOMEM;
- config = kzalloc(sizeof(*config), GFP_KERNEL);
- if (!config)
- goto out_config;
+ if (any_ms) {
+ intel_shared_dpll_commit(state);
- ret = intel_set_config_save_state(dev, config);
- if (ret)
- goto out_config;
+ drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
+ modeset_update_crtc_power_domains(state);
+ }
- save_set.crtc = set->crtc;
- save_set.mode = &set->crtc->mode;
- save_set.x = set->crtc->x;
- save_set.y = set->crtc->y;
- save_set.fb = set->crtc->primary->fb;
+ /* Now enable the clocks, plane, pipe, and connectors that we set up. */
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ bool modeset = needs_modeset(crtc->state);
+ bool update_pipe = !modeset &&
+ to_intel_crtc_state(crtc->state)->update_pipe;
+ unsigned long put_domains = 0;
- /* Compute whether we need a full modeset, only an fb base update or no
- * change at all. In the future we might also check whether only the
- * mode changed, e.g. for LVDS where we only change the panel fitter in
- * such cases. */
- intel_set_config_compute_mode_changes(set, config);
+ if (modeset && crtc->state->active) {
+ update_scanline_offset(to_intel_crtc(crtc));
+ dev_priv->display.crtc_enable(crtc);
+ }
- state = drm_atomic_state_alloc(dev);
- if (!state) {
- ret = -ENOMEM;
- goto out_config;
- }
+ if (update_pipe) {
+ put_domains = modeset_get_crtc_power_domains(crtc);
- state->acquire_ctx = dev->mode_config.acquire_ctx;
+ /* make sure intel_modeset_check_state runs */
+ any_ms = true;
+ }
- ret = intel_modeset_stage_output_state(dev, set, config, state);
- if (ret)
- goto fail;
+ if (!modeset)
+ intel_pre_plane_update(intel_crtc);
- pipe_config = intel_modeset_compute_config(set->crtc, set->mode,
- set->fb, state,
- &modeset_pipes,
- &prepare_pipes,
- &disable_pipes);
- if (IS_ERR(pipe_config)) {
- ret = PTR_ERR(pipe_config);
- goto fail;
- } else if (pipe_config) {
- if (pipe_config->has_audio !=
- to_intel_crtc(set->crtc)->config->has_audio)
- config->mode_changed = true;
+ drm_atomic_helper_commit_planes_on_crtc(crtc_state);
- /*
- * Note we have an issue here with infoframes: current code
- * only updates them on the full mode set path per hw
- * requirements. So here we should be checking for any
- * required changes and forcing a mode set.
- */
+ if (put_domains)
+ modeset_put_power_domains(dev_priv, put_domains);
+
+ intel_post_plane_update(intel_crtc);
}
- intel_update_pipe_size(to_intel_crtc(set->crtc));
+ /* FIXME: add subpixel order */
- if (config->mode_changed) {
- ret = intel_set_mode_pipes(set->crtc, set->mode,
- set->x, set->y, set->fb, pipe_config,
- modeset_pipes, prepare_pipes,
- disable_pipes);
- } else if (config->fb_changed) {
- struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
- struct drm_plane *primary = set->crtc->primary;
- int vdisplay, hdisplay;
+ drm_atomic_helper_wait_for_vblanks(dev, state);
+ drm_atomic_helper_cleanup_planes(dev, state);
- drm_crtc_get_hv_timing(set->mode, &hdisplay, &vdisplay);
- ret = primary->funcs->update_plane(primary, set->crtc, set->fb,
- 0, 0, hdisplay, vdisplay,
- set->x << 16, set->y << 16,
- hdisplay << 16, vdisplay << 16);
+ if (any_ms)
+ intel_modeset_check_state(dev, state);
- /*
- * We need to make sure the primary plane is re-enabled if it
- * has previously been turned off.
- */
- if (!intel_crtc->primary_enabled && ret == 0) {
- WARN_ON(!intel_crtc->active);
- intel_enable_primary_hw_plane(set->crtc->primary, set->crtc);
- }
+ drm_atomic_state_free(state);
- /*
- * In the fastboot case this may be our only check of the
- * state after boot. It would be better to only do it on
- * the first update, but we don't have a nice way of doing that
- * (and really, set_config isn't used much for high freq page
- * flipping, so increasing its cost here shouldn't be a big
- * deal).
- */
- if (i915.fastboot && ret == 0)
- intel_modeset_check_state(set->crtc->dev);
+ return 0;
+}
+
+void intel_crtc_restore_mode(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_atomic_state *state;
+ struct drm_crtc_state *crtc_state;
+ int ret;
+
+ state = drm_atomic_state_alloc(dev);
+ if (!state) {
+ DRM_DEBUG_KMS("[CRTC:%d] crtc restore failed, out of memory",
+ crtc->base.id);
+ return;
}
- if (ret) {
- DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
- set->crtc->base.id, ret);
-fail:
- intel_set_config_restore_state(dev, config);
+ state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
- drm_atomic_state_clear(state);
+retry:
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ ret = PTR_ERR_OR_ZERO(crtc_state);
+ if (!ret) {
+ if (!crtc_state->active)
+ goto out;
- /*
- * HACK: if the pipe was on, but we didn't have a framebuffer,
- * force the pipe off to avoid oopsing in the modeset code
- * due to fb==NULL. This should only happen during boot since
- * we don't yet reconstruct the FB from the hardware state.
- */
- if (to_intel_crtc(save_set.crtc)->new_enabled && !save_set.fb)
- disable_crtc_nofb(to_intel_crtc(save_set.crtc));
+ crtc_state->mode_changed = true;
+ ret = drm_atomic_commit(state);
+ }
- /* Try to restore the config */
- if (config->mode_changed &&
- intel_set_mode(save_set.crtc, save_set.mode,
- save_set.x, save_set.y, save_set.fb,
- state))
- DRM_ERROR("failed to restore config after modeset failure\n");
+ if (ret == -EDEADLK) {
+ drm_atomic_state_clear(state);
+ drm_modeset_backoff(state->acquire_ctx);
+ goto retry;
}
-out_config:
- if (state)
+ if (ret)
+out:
drm_atomic_state_free(state);
-
- intel_set_config_free(config);
- return ret;
}
+#undef for_each_intel_crtc_masked
+
static const struct drm_crtc_funcs intel_crtc_funcs = {
.gamma_set = intel_crtc_gamma_set,
- .set_config = intel_crtc_set_config,
+ .set_config = drm_atomic_helper_set_config,
.destroy = intel_crtc_destroy,
.page_flip = intel_crtc_page_flip,
.atomic_duplicate_state = intel_crtc_duplicate_state,
BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
}
-/**
- * intel_wm_need_update - Check whether watermarks need updating
- * @plane: drm plane
- * @state: new plane state
- *
- * Check current plane state versus the new one to determine whether
- * watermarks need to be recalculated.
- *
- * Returns true or false.
- */
-bool intel_wm_need_update(struct drm_plane *plane,
- struct drm_plane_state *state)
-{
- /* Update watermarks on tiling changes. */
- if (!plane->state->fb || !state->fb ||
- plane->state->fb->modifier[0] != state->fb->modifier[0] ||
- plane->state->rotation != state->rotation)
- return true;
-
- return false;
-}
-
/**
* intel_prepare_plane_fb - Prepare fb for usage on plane
* @plane: drm plane to prepare for
*/
int
intel_prepare_plane_fb(struct drm_plane *plane,
- struct drm_framebuffer *fb,
const struct drm_plane_state *new_state)
{
struct drm_device *dev = plane->dev;
+ struct drm_framebuffer *fb = new_state->fb;
struct intel_plane *intel_plane = to_intel_plane(plane);
- enum pipe pipe = intel_plane->pipe;
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
- unsigned frontbuffer_bits = 0;
int ret = 0;
if (!obj)
return 0;
- switch (plane->type) {
- case DRM_PLANE_TYPE_PRIMARY:
- frontbuffer_bits = INTEL_FRONTBUFFER_PRIMARY(pipe);
- break;
- case DRM_PLANE_TYPE_CURSOR:
- frontbuffer_bits = INTEL_FRONTBUFFER_CURSOR(pipe);
- break;
- case DRM_PLANE_TYPE_OVERLAY:
- frontbuffer_bits = INTEL_FRONTBUFFER_SPRITE(pipe);
- break;
- }
-
mutex_lock(&dev->struct_mutex);
if (plane->type == DRM_PLANE_TYPE_CURSOR &&
if (ret)
DRM_DEBUG_KMS("failed to attach phys object\n");
} else {
- ret = intel_pin_and_fence_fb_obj(plane, fb, new_state, NULL);
+ ret = intel_pin_and_fence_fb_obj(plane, fb, new_state, NULL, NULL);
}
if (ret == 0)
- i915_gem_track_fb(old_obj, obj, frontbuffer_bits);
+ i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
mutex_unlock(&dev->struct_mutex);
*/
void
intel_cleanup_plane_fb(struct drm_plane *plane,
- struct drm_framebuffer *fb,
const struct drm_plane_state *old_state)
{
struct drm_device *dev = plane->dev;
- struct drm_i915_gem_object *obj = intel_fb_obj(fb);
+ struct drm_i915_gem_object *obj = intel_fb_obj(old_state->fb);
- if (WARN_ON(!obj))
+ if (!obj)
return;
if (plane->type != DRM_PLANE_TYPE_CURSOR ||
!INTEL_INFO(dev)->cursor_needs_physical) {
mutex_lock(&dev->struct_mutex);
- intel_unpin_fb_obj(fb, old_state);
+ intel_unpin_fb_obj(old_state->fb, old_state);
mutex_unlock(&dev->struct_mutex);
}
}
-static int
-intel_check_primary_plane(struct drm_plane *plane,
- struct intel_plane_state *state)
+int
+skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
{
- struct drm_device *dev = plane->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc = state->base.crtc;
- struct intel_crtc *intel_crtc;
- struct drm_framebuffer *fb = state->base.fb;
- struct drm_rect *dest = &state->dst;
- struct drm_rect *src = &state->src;
- const struct drm_rect *clip = &state->clip;
- int ret;
-
- crtc = crtc ? crtc : plane->crtc;
- intel_crtc = to_intel_crtc(crtc);
-
- ret = drm_plane_helper_check_update(plane, crtc, fb,
- src, dest, clip,
- DRM_PLANE_HELPER_NO_SCALING,
- DRM_PLANE_HELPER_NO_SCALING,
- false, true, &state->visible);
- if (ret)
- return ret;
+ int max_scale;
+ struct drm_device *dev;
+ struct drm_i915_private *dev_priv;
+ int crtc_clock, cdclk;
- if (intel_crtc->active) {
- intel_crtc->atomic.wait_for_flips = true;
+ if (!intel_crtc || !crtc_state)
+ return DRM_PLANE_HELPER_NO_SCALING;
- /*
- * FBC does not work on some platforms for rotated
- * planes, so disable it when rotation is not 0 and
- * update it when rotation is set back to 0.
- *
- * FIXME: This is redundant with the fbc update done in
- * the primary plane enable function except that that
- * one is done too late. We eventually need to unify
- * this.
- */
- if (intel_crtc->primary_enabled &&
- INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
- dev_priv->fbc.crtc == intel_crtc &&
- state->base.rotation != BIT(DRM_ROTATE_0)) {
- intel_crtc->atomic.disable_fbc = true;
- }
+ dev = intel_crtc->base.dev;
+ dev_priv = dev->dev_private;
+ crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
+ cdclk = to_intel_atomic_state(crtc_state->base.state)->cdclk;
- if (state->visible) {
- /*
- * BDW signals flip done immediately if the plane
- * is disabled, even if the plane enable is already
- * armed to occur at the next vblank :(
- */
- if (IS_BROADWELL(dev) && !intel_crtc->primary_enabled)
- intel_crtc->atomic.wait_vblank = true;
- }
+ if (!crtc_clock || !cdclk)
+ return DRM_PLANE_HELPER_NO_SCALING;
- /*
- * FIXME: Actually if we will still have any other plane enabled
- * on the pipe we could let IPS enabled still, but for
- * now lets consider that when we make primary invisible
- * by setting DSPCNTR to 0 on update_primary_plane function
- * IPS needs to be disable.
- */
- if (!state->visible || !fb)
- intel_crtc->atomic.disable_ips = true;
+ /*
+ * skl max scale is lower of:
+ * close to 3 but not 3, -1 is for that purpose
+ * or
+ * cdclk/crtc_clock
+ */
+ max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock));
- intel_crtc->atomic.fb_bits |=
- INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
+ return max_scale;
+}
- intel_crtc->atomic.update_fbc = true;
+static int
+intel_check_primary_plane(struct drm_plane *plane,
+ struct intel_crtc_state *crtc_state,
+ struct intel_plane_state *state)
+{
+ struct drm_crtc *crtc = state->base.crtc;
+ struct drm_framebuffer *fb = state->base.fb;
+ int min_scale = DRM_PLANE_HELPER_NO_SCALING;
+ int max_scale = DRM_PLANE_HELPER_NO_SCALING;
+ bool can_position = false;
- if (intel_wm_need_update(plane, &state->base))
- intel_crtc->atomic.update_wm = true;
+ if (INTEL_INFO(plane->dev)->gen >= 9) {
+ /* use scaler when colorkey is not required */
+ if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
+ min_scale = 1;
+ max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state);
+ }
+ can_position = true;
}
- return 0;
+ return drm_plane_helper_check_update(plane, crtc, fb, &state->src,
+ &state->dst, &state->clip,
+ min_scale, max_scale,
+ can_position, true,
+ &state->visible);
}
static void
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc;
- struct drm_rect *src = &state->src;
-
- crtc = crtc ? crtc : plane->crtc;
- intel_crtc = to_intel_crtc(crtc);
-
- plane->fb = fb;
- crtc->x = src->x1 >> 16;
- crtc->y = src->y1 >> 16;
-
- if (intel_crtc->active) {
- if (state->visible) {
- /* FIXME: kill this fastboot hack */
- intel_update_pipe_size(intel_crtc);
-
- intel_crtc->primary_enabled = true;
-
- dev_priv->display.update_primary_plane(crtc, plane->fb,
- crtc->x, crtc->y);
- } else {
- /*
- * If clipping results in a non-visible primary plane,
- * we'll disable the primary plane. Note that this is
- * a bit different than what happens if userspace
- * explicitly disables the plane by passing fb=0
- * because plane->fb still gets set and pinned.
- */
- intel_disable_primary_hw_plane(plane, crtc);
- }
- }
-}
-
-static void intel_begin_crtc_commit(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_plane *intel_plane;
- struct drm_plane *p;
- unsigned fb_bits = 0;
-
- /* Track fb's for any planes being disabled */
- list_for_each_entry(p, &dev->mode_config.plane_list, head) {
- intel_plane = to_intel_plane(p);
-
- if (intel_crtc->atomic.disabled_planes &
- (1 << drm_plane_index(p))) {
- switch (p->type) {
- case DRM_PLANE_TYPE_PRIMARY:
- fb_bits = INTEL_FRONTBUFFER_PRIMARY(intel_plane->pipe);
- break;
- case DRM_PLANE_TYPE_CURSOR:
- fb_bits = INTEL_FRONTBUFFER_CURSOR(intel_plane->pipe);
- break;
- case DRM_PLANE_TYPE_OVERLAY:
- fb_bits = INTEL_FRONTBUFFER_SPRITE(intel_plane->pipe);
- break;
- }
-
- mutex_lock(&dev->struct_mutex);
- i915_gem_track_fb(intel_fb_obj(p->fb), NULL, fb_bits);
- mutex_unlock(&dev->struct_mutex);
- }
- }
-
- if (intel_crtc->atomic.wait_for_flips)
- intel_crtc_wait_for_pending_flips(crtc);
+ struct drm_rect *src = &state->src;
- if (intel_crtc->atomic.disable_fbc)
- intel_fbc_disable(dev);
+ crtc = crtc ? crtc : plane->crtc;
+ intel_crtc = to_intel_crtc(crtc);
- if (intel_crtc->atomic.disable_ips)
- hsw_disable_ips(intel_crtc);
+ plane->fb = fb;
+ crtc->x = src->x1 >> 16;
+ crtc->y = src->y1 >> 16;
- if (intel_crtc->atomic.pre_disable_primary)
- intel_pre_disable_primary(crtc);
+ if (!crtc->state->active)
+ return;
- if (intel_crtc->atomic.update_wm)
- intel_update_watermarks(crtc);
+ dev_priv->display.update_primary_plane(crtc, fb,
+ state->src.x1 >> 16,
+ state->src.y1 >> 16);
+}
- intel_runtime_pm_get(dev_priv);
+static void
+intel_disable_primary_plane(struct drm_plane *plane,
+ struct drm_crtc *crtc)
+{
+ struct drm_device *dev = plane->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
- /* Perform vblank evasion around commit operation */
- if (intel_crtc->active)
- intel_crtc->atomic.evade =
- intel_pipe_update_start(intel_crtc,
- &intel_crtc->atomic.start_vbl_count);
+ dev_priv->display.update_primary_plane(crtc, NULL, 0, 0);
}
-static void intel_finish_crtc_commit(struct drm_crtc *crtc)
+static void intel_begin_crtc_commit(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_crtc_state)
{
struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct drm_plane *p;
-
- if (intel_crtc->atomic.evade)
- intel_pipe_update_end(intel_crtc,
- intel_crtc->atomic.start_vbl_count);
+ struct intel_crtc_state *old_intel_state =
+ to_intel_crtc_state(old_crtc_state);
+ bool modeset = needs_modeset(crtc->state);
- intel_runtime_pm_put(dev_priv);
-
- if (intel_crtc->atomic.wait_vblank)
- intel_wait_for_vblank(dev, intel_crtc->pipe);
+ if (intel_crtc->atomic.update_wm_pre)
+ intel_update_watermarks(crtc);
- intel_frontbuffer_flip(dev, intel_crtc->atomic.fb_bits);
+ /* Perform vblank evasion around commit operation */
+ if (crtc->state->active)
+ intel_pipe_update_start(intel_crtc);
- if (intel_crtc->atomic.update_fbc) {
- mutex_lock(&dev->struct_mutex);
- intel_fbc_update(dev);
- mutex_unlock(&dev->struct_mutex);
- }
+ if (modeset)
+ return;
- if (intel_crtc->atomic.post_enable_primary)
- intel_post_enable_primary(crtc);
+ if (to_intel_crtc_state(crtc->state)->update_pipe)
+ intel_update_pipe_config(intel_crtc, old_intel_state);
+ else if (INTEL_INFO(dev)->gen >= 9)
+ skl_detach_scalers(intel_crtc);
+}
- drm_for_each_legacy_plane(p, &dev->mode_config.plane_list)
- if (intel_crtc->atomic.update_sprite_watermarks & drm_plane_index(p))
- intel_update_sprite_watermarks(p, crtc, 0, 0, 0,
- false, false);
+static void intel_finish_crtc_commit(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_crtc_state)
+{
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- memset(&intel_crtc->atomic, 0, sizeof(intel_crtc->atomic));
+ if (crtc->state->active)
+ intel_pipe_update_end(intel_crtc);
}
/**
}
const struct drm_plane_funcs intel_plane_funcs = {
- .update_plane = drm_plane_helper_update,
- .disable_plane = drm_plane_helper_disable,
+ .update_plane = drm_atomic_helper_update_plane,
+ .disable_plane = drm_atomic_helper_disable_plane,
.destroy = intel_plane_destroy,
.set_property = drm_atomic_helper_plane_set_property,
.atomic_get_property = intel_plane_atomic_get_property,
struct intel_plane *primary;
struct intel_plane_state *state;
const uint32_t *intel_primary_formats;
- int num_formats;
+ unsigned int num_formats;
primary = kzalloc(sizeof(*primary), GFP_KERNEL);
if (primary == NULL)
primary->can_scale = false;
primary->max_downscale = 1;
+ if (INTEL_INFO(dev)->gen >= 9) {
+ primary->can_scale = true;
+ state->scaler_id = -1;
+ }
primary->pipe = pipe;
primary->plane = pipe;
+ primary->frontbuffer_bit = INTEL_FRONTBUFFER_PRIMARY(pipe);
primary->check_plane = intel_check_primary_plane;
primary->commit_plane = intel_commit_primary_plane;
+ primary->disable_plane = intel_disable_primary_plane;
if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4)
primary->plane = !pipe;
- if (INTEL_INFO(dev)->gen <= 3) {
- intel_primary_formats = intel_primary_formats_gen2;
- num_formats = ARRAY_SIZE(intel_primary_formats_gen2);
+ if (INTEL_INFO(dev)->gen >= 9) {
+ intel_primary_formats = skl_primary_formats;
+ num_formats = ARRAY_SIZE(skl_primary_formats);
+ } else if (INTEL_INFO(dev)->gen >= 4) {
+ intel_primary_formats = i965_primary_formats;
+ num_formats = ARRAY_SIZE(i965_primary_formats);
} else {
- intel_primary_formats = intel_primary_formats_gen4;
- num_formats = ARRAY_SIZE(intel_primary_formats_gen4);
+ intel_primary_formats = i8xx_primary_formats;
+ num_formats = ARRAY_SIZE(i8xx_primary_formats);
}
drm_universal_plane_init(dev, &primary->base, 0,
intel_primary_formats, num_formats,
DRM_PLANE_TYPE_PRIMARY);
- if (INTEL_INFO(dev)->gen >= 4) {
- if (!dev->mode_config.rotation_property)
- dev->mode_config.rotation_property =
- drm_mode_create_rotation_property(dev,
- BIT(DRM_ROTATE_0) |
- BIT(DRM_ROTATE_180));
- if (dev->mode_config.rotation_property)
- drm_object_attach_property(&primary->base.base,
- dev->mode_config.rotation_property,
- state->base.rotation);
- }
+ if (INTEL_INFO(dev)->gen >= 4)
+ intel_create_rotation_property(dev, primary);
drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs);
return &primary->base;
}
+void intel_create_rotation_property(struct drm_device *dev, struct intel_plane *plane)
+{
+ if (!dev->mode_config.rotation_property) {
+ unsigned long flags = BIT(DRM_ROTATE_0) |
+ BIT(DRM_ROTATE_180);
+
+ if (INTEL_INFO(dev)->gen >= 9)
+ flags |= BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270);
+
+ dev->mode_config.rotation_property =
+ drm_mode_create_rotation_property(dev, flags);
+ }
+ if (dev->mode_config.rotation_property)
+ drm_object_attach_property(&plane->base.base,
+ dev->mode_config.rotation_property,
+ plane->base.state->rotation);
+}
+
static int
intel_check_cursor_plane(struct drm_plane *plane,
+ struct intel_crtc_state *crtc_state,
struct intel_plane_state *state)
{
- struct drm_crtc *crtc = state->base.crtc;
- struct drm_device *dev = plane->dev;
+ struct drm_crtc *crtc = crtc_state->base.crtc;
struct drm_framebuffer *fb = state->base.fb;
- struct drm_rect *dest = &state->dst;
- struct drm_rect *src = &state->src;
- const struct drm_rect *clip = &state->clip;
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
- struct intel_crtc *intel_crtc;
+ enum pipe pipe = to_intel_plane(plane)->pipe;
unsigned stride;
int ret;
- crtc = crtc ? crtc : plane->crtc;
- intel_crtc = to_intel_crtc(crtc);
-
- ret = drm_plane_helper_check_update(plane, crtc, fb,
- src, dest, clip,
+ ret = drm_plane_helper_check_update(plane, crtc, fb, &state->src,
+ &state->dst, &state->clip,
DRM_PLANE_HELPER_NO_SCALING,
DRM_PLANE_HELPER_NO_SCALING,
true, true, &state->visible);
if (ret)
return ret;
-
/* if we want to turn off the cursor ignore width and height */
if (!obj)
- goto finish;
+ return 0;
/* Check for which cursor types we support */
- if (!cursor_size_ok(dev, state->base.crtc_w, state->base.crtc_h)) {
+ if (!cursor_size_ok(plane->dev, state->base.crtc_w, state->base.crtc_h)) {
DRM_DEBUG("Cursor dimension %dx%d not supported\n",
state->base.crtc_w, state->base.crtc_h);
return -EINVAL;
if (fb->modifier[0] != DRM_FORMAT_MOD_NONE) {
DRM_DEBUG_KMS("cursor cannot be tiled\n");
- ret = -EINVAL;
+ return -EINVAL;
}
-finish:
- if (intel_crtc->active) {
- if (plane->state->crtc_w != state->base.crtc_w)
- intel_crtc->atomic.update_wm = true;
-
- intel_crtc->atomic.fb_bits |=
- INTEL_FRONTBUFFER_CURSOR(intel_crtc->pipe);
+ /*
+ * There's something wrong with the cursor on CHV pipe C.
+ * If it straddles the left edge of the screen then
+ * moving it away from the edge or disabling it often
+ * results in a pipe underrun, and often that can lead to
+ * dead pipe (constant underrun reported, and it scans
+ * out just a solid color). To recover from that, the
+ * display power well must be turned off and on again.
+ * Refuse the put the cursor into that compromised position.
+ */
+ if (IS_CHERRYVIEW(plane->dev) && pipe == PIPE_C &&
+ state->visible && state->base.crtc_x < 0) {
+ DRM_DEBUG_KMS("CHV cursor C not allowed to straddle the left screen edge\n");
+ return -EINVAL;
}
- return ret;
+ return 0;
+}
+
+static void
+intel_disable_cursor_plane(struct drm_plane *plane,
+ struct drm_crtc *crtc)
+{
+ intel_crtc_update_cursor(crtc, false);
}
static void
crtc = crtc ? crtc : plane->crtc;
intel_crtc = to_intel_crtc(crtc);
- plane->fb = state->base.fb;
- crtc->cursor_x = state->base.crtc_x;
- crtc->cursor_y = state->base.crtc_y;
-
- if (intel_crtc->cursor_bo == obj)
- goto update;
-
if (!obj)
addr = 0;
else if (!INTEL_INFO(dev)->cursor_needs_physical)
addr = obj->phys_handle->busaddr;
intel_crtc->cursor_addr = addr;
- intel_crtc->cursor_bo = obj;
-update:
- if (intel_crtc->active)
+ if (crtc->state->active)
intel_crtc_update_cursor(crtc, state->visible);
}
cursor->max_downscale = 1;
cursor->pipe = pipe;
cursor->plane = pipe;
+ cursor->frontbuffer_bit = INTEL_FRONTBUFFER_CURSOR(pipe);
cursor->check_plane = intel_check_cursor_plane;
cursor->commit_plane = intel_commit_cursor_plane;
+ cursor->disable_plane = intel_disable_cursor_plane;
drm_universal_plane_init(dev, &cursor->base, 0,
&intel_plane_funcs,
state->base.rotation);
}
+ if (INTEL_INFO(dev)->gen >=9)
+ state->scaler_id = -1;
+
drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);
return &cursor->base;
}
+static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
+ struct intel_crtc_state *crtc_state)
+{
+ int i;
+ struct intel_scaler *intel_scaler;
+ struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state;
+
+ for (i = 0; i < intel_crtc->num_scalers; i++) {
+ intel_scaler = &scaler_state->scalers[i];
+ intel_scaler->in_use = 0;
+ intel_scaler->mode = PS_SCALER_MODE_DYN;
+ }
+
+ scaler_state->scaler_id = -1;
+}
+
static void intel_crtc_init(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
if (!crtc_state)
goto fail;
- intel_crtc_set_state(intel_crtc, crtc_state);
+ intel_crtc->config = crtc_state;
+ intel_crtc->base.state = &crtc_state->base;
crtc_state->base.crtc = &intel_crtc->base;
+ /* initialize shared scalers */
+ if (INTEL_INFO(dev)->gen >= 9) {
+ if (pipe == PIPE_C)
+ intel_crtc->num_scalers = 1;
+ else
+ intel_crtc->num_scalers = SKL_NUM_SCALERS;
+
+ skl_init_scalers(dev, intel_crtc, crtc_state);
+ }
+
primary = intel_primary_plane_create(dev, pipe);
if (!primary)
goto fail;
intel_crtc->cursor_cntl = ~0;
intel_crtc->cursor_size = ~0;
+ intel_crtc->wm.cxsr_allowed = true;
+
BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
- INIT_WORK(&intel_crtc->mmio_flip.work, intel_mmio_flip_work_func);
-
drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
if (intel_crt_present(dev))
intel_crt_init(dev);
- if (HAS_DDI(dev)) {
+ if (IS_BROXTON(dev)) {
+ /*
+ * FIXME: Broxton doesn't support port detection via the
+ * DDI_BUF_CTL_A or SFUSE_STRAP registers, find another way to
+ * detect the ports.
+ */
+ intel_ddi_init(dev, PORT_A);
+ intel_ddi_init(dev, PORT_B);
+ intel_ddi_init(dev, PORT_C);
+ } else if (HAS_DDI(dev)) {
int found;
/*
* On SKL pre-D0 the strap isn't connected, so we assume
* it's there.
*/
- found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED;
+ found = I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
/* WaIgnoreDDIAStrap: skl */
- if (found ||
- (IS_SKYLAKE(dev) && INTEL_REVID(dev) < SKL_REVID_D0))
+ if (found || IS_SKYLAKE(dev))
intel_ddi_init(dev, PORT_A);
/* DDI B, C and D detection is indicated by the SFUSE_STRAP
intel_ddi_init(dev, PORT_C);
if (found & SFUSE_STRAP_DDID_DETECTED)
intel_ddi_init(dev, PORT_D);
+ /*
+ * On SKL we don't have a way to detect DDI-E so we rely on VBT.
+ */
+ if (IS_SKYLAKE(dev) &&
+ (dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
+ dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
+ dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi))
+ intel_ddi_init(dev, PORT_E);
+
} else if (HAS_PCH_SPLIT(dev)) {
int found;
dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
* eDP ports. Consult the VBT as well as DP_DETECTED to
* detect eDP ports.
*/
- if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED &&
+ if (I915_READ(VLV_HDMIB) & SDVO_DETECTED &&
!intel_dp_is_edp(dev, PORT_B))
- intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB,
- PORT_B);
- if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED ||
+ intel_hdmi_init(dev, VLV_HDMIB, PORT_B);
+ if (I915_READ(VLV_DP_B) & DP_DETECTED ||
intel_dp_is_edp(dev, PORT_B))
- intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
+ intel_dp_init(dev, VLV_DP_B, PORT_B);
- if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED &&
+ if (I915_READ(VLV_HDMIC) & SDVO_DETECTED &&
!intel_dp_is_edp(dev, PORT_C))
- intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC,
- PORT_C);
- if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED ||
+ intel_hdmi_init(dev, VLV_HDMIC, PORT_C);
+ if (I915_READ(VLV_DP_C) & DP_DETECTED ||
intel_dp_is_edp(dev, PORT_C))
- intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
+ intel_dp_init(dev, VLV_DP_C, PORT_C);
if (IS_CHERRYVIEW(dev)) {
- if (I915_READ(VLV_DISPLAY_BASE + CHV_HDMID) & SDVO_DETECTED)
- intel_hdmi_init(dev, VLV_DISPLAY_BASE + CHV_HDMID,
- PORT_D);
/* eDP not supported on port D, so don't check VBT */
- if (I915_READ(VLV_DISPLAY_BASE + DP_D) & DP_DETECTED)
- intel_dp_init(dev, VLV_DISPLAY_BASE + DP_D, PORT_D);
+ if (I915_READ(CHV_HDMID) & SDVO_DETECTED)
+ intel_hdmi_init(dev, CHV_HDMID, PORT_D);
+ if (I915_READ(CHV_DP_D) & DP_DETECTED)
+ intel_dp_init(dev, CHV_DP_D, PORT_D);
}
intel_dsi_init(dev);
- } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
+ } else if (!IS_GEN2(dev) && !IS_PINEVIEW(dev)) {
bool found = false;
if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
DRM_DEBUG_KMS("probing SDVOB\n");
found = intel_sdvo_init(dev, GEN3_SDVOB, true);
- if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
+ if (!found && IS_G4X(dev)) {
DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
}
- if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ if (!found && IS_G4X(dev))
intel_dp_init(dev, DP_B, PORT_B);
}
if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
- if (SUPPORTS_INTEGRATED_HDMI(dev)) {
+ if (IS_G4X(dev)) {
DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
}
- if (SUPPORTS_INTEGRATED_DP(dev))
+ if (IS_G4X(dev))
intel_dp_init(dev, DP_C, PORT_C);
}
- if (SUPPORTS_INTEGRATED_DP(dev) &&
+ if (IS_G4X(dev) &&
(I915_READ(DP_D) & DP_DETECTED))
intel_dp_init(dev, DP_D, PORT_D);
} else if (IS_GEN2(dev))
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
struct drm_i915_gem_object *obj = intel_fb->obj;
+ if (obj->userptr.mm) {
+ DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
+ return -EINVAL;
+ }
+
return drm_gem_handle_create(file, &obj->base, handle);
}
+static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb,
+ struct drm_file *file,
+ unsigned flags, unsigned color,
+ struct drm_clip_rect *clips,
+ unsigned num_clips)
+{
+ struct drm_device *dev = fb->dev;
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct drm_i915_gem_object *obj = intel_fb->obj;
+
+ mutex_lock(&dev->struct_mutex);
+ intel_fb_obj_flush(obj, false, ORIGIN_DIRTYFB);
+ mutex_unlock(&dev->struct_mutex);
+
+ return 0;
+}
+
static const struct drm_framebuffer_funcs intel_fb_funcs = {
.destroy = intel_user_framebuffer_destroy,
.create_handle = intel_user_framebuffer_create_handle,
+ .dirty = intel_user_framebuffer_dirty,
};
static
case DRM_FORMAT_ARGB8888:
break;
case DRM_FORMAT_XRGB1555:
- case DRM_FORMAT_ARGB1555:
if (INTEL_INFO(dev)->gen > 3) {
DRM_DEBUG("unsupported pixel format: %s\n",
drm_get_format_name(mode_cmd->pixel_format));
return -EINVAL;
}
break;
- case DRM_FORMAT_XBGR8888:
case DRM_FORMAT_ABGR8888:
+ if (!IS_VALLEYVIEW(dev) && INTEL_INFO(dev)->gen < 9) {
+ DRM_DEBUG("unsupported pixel format: %s\n",
+ drm_get_format_name(mode_cmd->pixel_format));
+ return -EINVAL;
+ }
+ break;
+ case DRM_FORMAT_XBGR8888:
case DRM_FORMAT_XRGB2101010:
- case DRM_FORMAT_ARGB2101010:
case DRM_FORMAT_XBGR2101010:
- case DRM_FORMAT_ABGR2101010:
if (INTEL_INFO(dev)->gen < 4) {
DRM_DEBUG("unsupported pixel format: %s\n",
drm_get_format_name(mode_cmd->pixel_format));
return -EINVAL;
}
break;
+ case DRM_FORMAT_ABGR2101010:
+ if (!IS_VALLEYVIEW(dev)) {
+ DRM_DEBUG("unsupported pixel format: %s\n",
+ drm_get_format_name(mode_cmd->pixel_format));
+ return -EINVAL;
+ }
+ break;
case DRM_FORMAT_YUYV:
case DRM_FORMAT_UYVY:
case DRM_FORMAT_YVYU:
static struct drm_framebuffer *
intel_user_framebuffer_create(struct drm_device *dev,
struct drm_file *filp,
- struct drm_mode_fb_cmd2 *mode_cmd)
+ struct drm_mode_fb_cmd2 *user_mode_cmd)
{
struct drm_i915_gem_object *obj;
+ struct drm_mode_fb_cmd2 mode_cmd = *user_mode_cmd;
obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
- mode_cmd->handles[0]));
+ mode_cmd.handles[0]));
if (&obj->base == NULL)
return ERR_PTR(-ENOENT);
- return intel_framebuffer_create(dev, mode_cmd, obj);
+ return intel_framebuffer_create(dev, &mode_cmd, obj);
}
-#ifndef CONFIG_DRM_I915_FBDEV
+#ifndef CONFIG_DRM_FBDEV_EMULATION
static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
{
}
.output_poll_changed = intel_fbdev_output_poll_changed,
.atomic_check = intel_atomic_check,
.atomic_commit = intel_atomic_commit,
+ .atomic_state_alloc = intel_atomic_state_alloc,
+ .atomic_state_clear = intel_atomic_state_clear,
};
/* Set up chip specific display functions */
haswell_crtc_compute_clock;
dev_priv->display.crtc_enable = haswell_crtc_enable;
dev_priv->display.crtc_disable = haswell_crtc_disable;
- dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_primary_plane =
skylake_update_primary_plane;
} else if (HAS_DDI(dev)) {
haswell_crtc_compute_clock;
dev_priv->display.crtc_enable = haswell_crtc_enable;
dev_priv->display.crtc_disable = haswell_crtc_disable;
- dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_primary_plane =
ironlake_update_primary_plane;
} else if (HAS_PCH_SPLIT(dev)) {
ironlake_crtc_compute_clock;
dev_priv->display.crtc_enable = ironlake_crtc_enable;
dev_priv->display.crtc_disable = ironlake_crtc_disable;
- dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_primary_plane =
ironlake_update_primary_plane;
} else if (IS_VALLEYVIEW(dev)) {
dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
dev_priv->display.crtc_enable = valleyview_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
- dev_priv->display.off = i9xx_crtc_off;
dev_priv->display.update_primary_plane =
i9xx_update_primary_plane;
} else {
dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
dev_priv->display.crtc_enable = i9xx_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
- dev_priv->display.off = i9xx_crtc_off;
dev_priv->display.update_primary_plane =
i9xx_update_primary_plane;
}
/* Returns the core display clock speed */
- if (IS_VALLEYVIEW(dev))
+ if (IS_SKYLAKE(dev))
+ dev_priv->display.get_display_clock_speed =
+ skylake_get_display_clock_speed;
+ else if (IS_BROXTON(dev))
+ dev_priv->display.get_display_clock_speed =
+ broxton_get_display_clock_speed;
+ else if (IS_BROADWELL(dev))
+ dev_priv->display.get_display_clock_speed =
+ broadwell_get_display_clock_speed;
+ else if (IS_HASWELL(dev))
+ dev_priv->display.get_display_clock_speed =
+ haswell_get_display_clock_speed;
+ else if (IS_VALLEYVIEW(dev))
dev_priv->display.get_display_clock_speed =
valleyview_get_display_clock_speed;
- else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
+ else if (IS_GEN5(dev))
+ dev_priv->display.get_display_clock_speed =
+ ilk_get_display_clock_speed;
+ else if (IS_I945G(dev) || IS_BROADWATER(dev) ||
+ IS_GEN6(dev) || IS_IVYBRIDGE(dev))
dev_priv->display.get_display_clock_speed =
i945_get_display_clock_speed;
+ else if (IS_GM45(dev))
+ dev_priv->display.get_display_clock_speed =
+ gm45_get_display_clock_speed;
+ else if (IS_CRESTLINE(dev))
+ dev_priv->display.get_display_clock_speed =
+ i965gm_get_display_clock_speed;
+ else if (IS_PINEVIEW(dev))
+ dev_priv->display.get_display_clock_speed =
+ pnv_get_display_clock_speed;
+ else if (IS_G33(dev) || IS_G4X(dev))
+ dev_priv->display.get_display_clock_speed =
+ g33_get_display_clock_speed;
else if (IS_I915G(dev))
dev_priv->display.get_display_clock_speed =
i915_get_display_clock_speed;
i865_get_display_clock_speed;
else if (IS_I85X(dev))
dev_priv->display.get_display_clock_speed =
- i855_get_display_clock_speed;
- else /* 852, 830 */
+ i85x_get_display_clock_speed;
+ else { /* 830 */
+ WARN(!IS_I830(dev), "Unknown platform. Assuming 133 MHz CDCLK\n");
dev_priv->display.get_display_clock_speed =
i830_get_display_clock_speed;
+ }
if (IS_GEN5(dev)) {
dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+ if (IS_BROADWELL(dev)) {
+ dev_priv->display.modeset_commit_cdclk =
+ broadwell_modeset_commit_cdclk;
+ dev_priv->display.modeset_calc_cdclk =
+ broadwell_modeset_calc_cdclk;
+ }
} else if (IS_VALLEYVIEW(dev)) {
- dev_priv->display.modeset_global_resources =
- valleyview_modeset_global_resources;
+ dev_priv->display.modeset_commit_cdclk =
+ valleyview_modeset_commit_cdclk;
+ dev_priv->display.modeset_calc_cdclk =
+ valleyview_modeset_calc_cdclk;
+ } else if (IS_BROXTON(dev)) {
+ dev_priv->display.modeset_commit_cdclk =
+ broxton_modeset_commit_cdclk;
+ dev_priv->display.modeset_calc_cdclk =
+ broxton_modeset_calc_cdclk;
}
switch (INTEL_INFO(dev)->gen) {
dev_priv->display.queue_flip = intel_default_queue_flip;
}
- intel_panel_init_backlight_funcs(dev);
-
mutex_init(&dev_priv->pps_mutex);
}
/* Apple Macbook 2,1 (Core 2 T7400) */
{ 0x27a2, 0x8086, 0x7270, quirk_backlight_present },
+ /* Apple Macbook 4,1 */
+ { 0x2a02, 0x106b, 0x00a1, quirk_backlight_present },
+
/* Toshiba CB35 Chromebook (Celeron 2955U) */
{ 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
/* Dell Chromebook 11 */
{ 0x0a06, 0x1028, 0x0a35, quirk_backlight_present },
+
+ /* Dell Chromebook 11 (2015 version) */
+ { 0x0a16, 0x1028, 0x0a35, quirk_backlight_present },
};
static void intel_init_quirks(struct drm_device *dev)
void intel_modeset_init_hw(struct drm_device *dev)
{
+ intel_update_cdclk(dev);
intel_prepare_ddi(dev);
-
- if (IS_VALLEYVIEW(dev))
- vlv_update_cdclk(dev);
-
intel_init_clock_gating(dev);
-
intel_enable_gt_powersave(dev);
}
}
}
- intel_init_dpio(dev);
+ intel_update_czclk(dev_priv);
+ intel_update_cdclk(dev);
intel_shared_dpll_init(dev);
intel_setup_outputs(dev);
/* Just in case the BIOS is doing something questionable. */
- intel_fbc_disable(dev);
+ intel_fbc_disable(dev_priv);
drm_modeset_lock_all(dev);
- intel_modeset_setup_hw_state(dev, false);
+ intel_modeset_setup_hw_state(dev);
drm_modeset_unlock_all(dev);
for_each_intel_crtc(dev, crtc) {
+ struct intel_initial_plane_config plane_config = {};
+
if (!crtc->active)
continue;
* can even allow for smooth boot transitions if the BIOS
* fb is large enough for the active pipe configuration.
*/
- if (dev_priv->display.get_initial_plane_config) {
- dev_priv->display.get_initial_plane_config(crtc,
- &crtc->plane_config);
- /*
- * If the fb is shared between multiple heads, we'll
- * just get the first one.
- */
- intel_find_initial_plane_obj(crtc, &crtc->plane_config);
- }
+ dev_priv->display.get_initial_plane_config(crtc,
+ &plane_config);
+
+ /*
+ * If the fb is shared between multiple heads, we'll
+ * just get the first one.
+ */
+ intel_find_initial_plane_obj(crtc, &plane_config);
}
}
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 reg, val;
+ u32 val;
if (INTEL_INFO(dev)->num_pipes == 1)
return true;
- reg = DSPCNTR(!crtc->plane);
- val = I915_READ(reg);
+ val = I915_READ(DSPCNTR(!crtc->plane));
if ((val & DISPLAY_PLANE_ENABLE) &&
(!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
return true;
}
+static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct intel_encoder *encoder;
+
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
+ return true;
+
+ return false;
+}
+
static void intel_sanitize_crtc(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
/* restore vblank interrupts to correct state */
drm_crtc_vblank_reset(&crtc->base);
if (crtc->active) {
- update_scanline_offset(crtc);
+ struct intel_plane *plane;
+
drm_crtc_vblank_on(&crtc->base);
+
+ /* Disable everything but the primary plane */
+ for_each_intel_plane_on_crtc(dev, crtc, plane) {
+ if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
+ continue;
+
+ plane->disable_plane(&plane->base, &crtc->base);
+ }
}
/* We need to sanitize the plane -> pipe mapping first because this will
* disable the crtc (and hence change the state) if it is wrong. Note
* that gen4+ has a fixed plane -> pipe mapping. */
if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
- struct intel_connector *connector;
bool plane;
DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
* Temporarily change the plane mapping and disable everything
* ... */
plane = crtc->plane;
+ to_intel_plane_state(crtc->base.primary->state)->visible = true;
crtc->plane = !plane;
- crtc->primary_enabled = true;
- dev_priv->display.crtc_disable(&crtc->base);
+ intel_crtc_disable_noatomic(&crtc->base);
crtc->plane = plane;
-
- /* ... and break all links. */
- for_each_intel_connector(dev, connector) {
- if (connector->encoder->base.crtc != &crtc->base)
- continue;
-
- connector->base.dpms = DRM_MODE_DPMS_OFF;
- connector->base.encoder = NULL;
- }
- /* multiple connectors may have the same encoder:
- * handle them and break crtc link separately */
- for_each_intel_connector(dev, connector)
- if (connector->encoder->base.crtc == &crtc->base) {
- connector->encoder->base.crtc = NULL;
- connector->encoder->connectors_active = false;
- }
-
- WARN_ON(crtc->active);
- crtc->base.state->enable = false;
- crtc->base.enabled = false;
}
if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
/* Adjust the state of the output pipe according to whether we
* have active connectors/encoders. */
- intel_crtc_update_dpms(&crtc->base);
+ if (!intel_crtc_has_encoders(crtc))
+ intel_crtc_disable_noatomic(&crtc->base);
- if (crtc->active != crtc->base.state->enable) {
+ if (crtc->active != crtc->base.state->active) {
struct intel_encoder *encoder;
/* This can happen either due to bugs in the get_hw_state
- * functions or because the pipe is force-enabled due to the
+ * functions or because of calls to intel_crtc_disable_noatomic,
+ * or because the pipe is force-enabled due to the
* pipe A quirk. */
DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
crtc->base.base.id,
crtc->base.state->enable ? "enabled" : "disabled",
crtc->active ? "enabled" : "disabled");
- crtc->base.state->enable = crtc->active;
+ WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, NULL) < 0);
+ crtc->base.state->active = crtc->active;
crtc->base.enabled = crtc->active;
/* Because we only establish the connector -> encoder ->
* actually up, hence no need to break them. */
WARN_ON(crtc->active);
- for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
- WARN_ON(encoder->connectors_active);
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
encoder->base.crtc = NULL;
- }
}
if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
{
struct intel_connector *connector;
struct drm_device *dev = encoder->base.dev;
+ bool active = false;
/* We need to check both for a crtc link (meaning that the
* encoder is active and trying to read from a pipe) and the
bool has_active_crtc = encoder->base.crtc &&
to_intel_crtc(encoder->base.crtc)->active;
- if (encoder->connectors_active && !has_active_crtc) {
+ for_each_intel_connector(dev, connector) {
+ if (connector->base.encoder != &encoder->base)
+ continue;
+
+ active = true;
+ break;
+ }
+
+ if (active && !has_active_crtc) {
DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
encoder->base.base.id,
encoder->base.name);
encoder->post_disable(encoder);
}
encoder->base.crtc = NULL;
- encoder->connectors_active = false;
/* Inconsistent output/port/pipe state happens presumably due to
* a bug in one of the get_hw_state functions. Or someplace else
i915_redisable_vga_power_on(dev);
}
-static bool primary_get_hw_state(struct intel_crtc *crtc)
+static bool primary_get_hw_state(struct intel_plane *plane)
{
- struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
+ struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
- if (!crtc->active)
- return false;
+ return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
+}
+
+/* FIXME read out full plane state for all planes */
+static void readout_plane_state(struct intel_crtc *crtc)
+{
+ struct drm_plane *primary = crtc->base.primary;
+ struct intel_plane_state *plane_state =
+ to_intel_plane_state(primary->state);
- return I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE;
+ plane_state->visible =
+ primary_get_hw_state(to_intel_plane(primary));
+
+ if (plane_state->visible)
+ crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
}
static void intel_modeset_readout_hw_state(struct drm_device *dev)
int i;
for_each_intel_crtc(dev, crtc) {
+ __drm_atomic_helper_crtc_destroy_state(&crtc->base, crtc->base.state);
memset(crtc->config, 0, sizeof(*crtc->config));
-
- crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
+ crtc->config->base.crtc = &crtc->base;
crtc->active = dev_priv->display.get_pipe_config(crtc,
crtc->config);
- crtc->base.state->enable = crtc->active;
+ crtc->base.state->active = crtc->active;
crtc->base.enabled = crtc->active;
- crtc->primary_enabled = primary_get_hw_state(crtc);
+
+ readout_plane_state(crtc);
DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
crtc->base.base.id,
encoder->base.crtc = NULL;
}
- encoder->connectors_active = false;
DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
encoder->base.base.id,
encoder->base.name,
for_each_intel_connector(dev, connector) {
if (connector->get_hw_state(connector)) {
connector->base.dpms = DRM_MODE_DPMS_ON;
- connector->encoder->connectors_active = true;
connector->base.encoder = &connector->encoder->base;
} else {
connector->base.dpms = DRM_MODE_DPMS_OFF;
connector->base.name,
connector->base.encoder ? "enabled" : "disabled");
}
+
+ for_each_intel_crtc(dev, crtc) {
+ crtc->base.hwmode = crtc->config->base.adjusted_mode;
+
+ memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
+ if (crtc->base.state->active) {
+ intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
+ intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
+ WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
+
+ /*
+ * The initial mode needs to be set in order to keep
+ * the atomic core happy. It wants a valid mode if the
+ * crtc's enabled, so we do the above call.
+ *
+ * At this point some state updated by the connectors
+ * in their ->detect() callback has not run yet, so
+ * no recalculation can be done yet.
+ *
+ * Even if we could do a recalculation and modeset
+ * right now it would cause a double modeset if
+ * fbdev or userspace chooses a different initial mode.
+ *
+ * If that happens, someone indicated they wanted a
+ * mode change, which means it's safe to do a full
+ * recalculation.
+ */
+ crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
+
+ drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
+ update_scanline_offset(crtc);
+ }
+ }
}
-/* Scan out the current hw modeset state, sanitizes it and maps it into the drm
- * and i915 state tracking structures. */
-void intel_modeset_setup_hw_state(struct drm_device *dev,
- bool force_restore)
+/* Scan out the current hw modeset state,
+ * and sanitizes it to the current state
+ */
+static void
+intel_modeset_setup_hw_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe;
intel_modeset_readout_hw_state(dev);
- /*
- * Now that we have the config, copy it to each CRTC struct
- * Note that this could go away if we move to using crtc_config
- * checking everywhere.
- */
- for_each_intel_crtc(dev, crtc) {
- if (crtc->active && i915.fastboot) {
- intel_mode_from_pipe_config(&crtc->base.mode,
- crtc->config);
- DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
- crtc->base.base.id);
- drm_mode_debug_printmodeline(&crtc->base.mode);
- }
- }
-
/* HW state is read out, now we need to sanitize this mess. */
for_each_intel_encoder(dev, encoder) {
intel_sanitize_encoder(encoder);
pll->on = false;
}
- if (IS_GEN9(dev))
+ if (IS_VALLEYVIEW(dev))
+ vlv_wm_get_hw_state(dev);
+ else if (IS_GEN9(dev))
skl_wm_get_hw_state(dev);
else if (HAS_PCH_SPLIT(dev))
ilk_wm_get_hw_state(dev);
- if (force_restore) {
- i915_redisable_vga(dev);
+ for_each_intel_crtc(dev, crtc) {
+ unsigned long put_domains;
- /*
- * We need to use raw interfaces for restoring state to avoid
- * checking (bogus) intermediate states.
- */
- for_each_pipe(dev_priv, pipe) {
- struct drm_crtc *crtc =
- dev_priv->pipe_to_crtc_mapping[pipe];
+ put_domains = modeset_get_crtc_power_domains(&crtc->base);
+ if (WARN_ON(put_domains))
+ modeset_put_power_domains(dev_priv, put_domains);
+ }
+ intel_display_set_init_power(dev_priv, false);
+}
- intel_crtc_restore_mode(crtc);
- }
- } else {
- intel_modeset_update_staged_output_state(dev);
+void intel_display_resume(struct drm_device *dev)
+{
+ struct drm_atomic_state *state = drm_atomic_state_alloc(dev);
+ struct intel_connector *conn;
+ struct intel_plane *plane;
+ struct drm_crtc *crtc;
+ int ret;
+
+ if (!state)
+ return;
+
+ state->acquire_ctx = dev->mode_config.acquire_ctx;
+
+ /* preserve complete old state, including dpll */
+ intel_atomic_get_shared_dpll_state(state);
+
+ for_each_crtc(dev, crtc) {
+ struct drm_crtc_state *crtc_state =
+ drm_atomic_get_crtc_state(state, crtc);
+
+ ret = PTR_ERR_OR_ZERO(crtc_state);
+ if (ret)
+ goto err;
+
+ /* force a restore */
+ crtc_state->mode_changed = true;
+ }
+
+ for_each_intel_plane(dev, plane) {
+ ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(state, &plane->base));
+ if (ret)
+ goto err;
+ }
+
+ for_each_intel_connector(dev, conn) {
+ ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(state, &conn->base));
+ if (ret)
+ goto err;
}
- intel_modeset_check_state(dev);
+ intel_modeset_setup_hw_state(dev);
+
+ i915_redisable_vga(dev);
+ ret = drm_atomic_commit(state);
+ if (!ret)
+ return;
+
+err:
+ DRM_ERROR("Restoring old state failed with %i\n", ret);
+ drm_atomic_state_free(state);
}
void intel_modeset_gem_init(struct drm_device *dev)
ret = intel_pin_and_fence_fb_obj(c->primary,
c->primary->fb,
c->primary->state,
- NULL);
+ NULL, NULL);
mutex_unlock(&dev->struct_mutex);
if (ret) {
DRM_ERROR("failed to pin boot fb on pipe %d\n",
to_intel_crtc(c)->pipe);
drm_framebuffer_unreference(c->primary->fb);
c->primary->fb = NULL;
+ c->primary->crtc = c->primary->state->crtc = NULL;
update_state_fb(c->primary);
+ c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
}
}
*/
drm_kms_helper_poll_fini(dev);
- mutex_lock(&dev->struct_mutex);
-
intel_unregister_dsm_handler();
- intel_fbc_disable(dev);
-
- mutex_unlock(&dev->struct_mutex);
+ intel_fbc_disable(dev_priv);
/* flush any delayed tasks or pending work */
flush_scheduled_work();
mutex_lock(&dev->struct_mutex);
intel_cleanup_gt_powersave(dev);
mutex_unlock(&dev->struct_mutex);
+
+ intel_teardown_gmbus(dev);
}
/*
Code Review / kvmfornfv.git / blobdiff