--- /dev/null
+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ * Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+
+#include <drm/drmP.h>
+#include "framebuffer.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "gma_display.h"
+#include "power.h"
+#include "cdv_device.h"
+
+static bool cdv_intel_find_dp_pll(const struct gma_limit_t *limit,
+ struct drm_crtc *crtc, int target,
+ int refclk, struct gma_clock_t *best_clock);
+
+
+#define CDV_LIMIT_SINGLE_LVDS_96 0
+#define CDV_LIMIT_SINGLE_LVDS_100 1
+#define CDV_LIMIT_DAC_HDMI_27 2
+#define CDV_LIMIT_DAC_HDMI_96 3
+#define CDV_LIMIT_DP_27 4
+#define CDV_LIMIT_DP_100 5
+
+static const struct gma_limit_t cdv_intel_limits[] = {
+ { /* CDV_SINGLE_LVDS_96MHz */
+ .dot = {.min = 20000, .max = 115500},
+ .vco = {.min = 1800000, .max = 3600000},
+ .n = {.min = 2, .max = 6},
+ .m = {.min = 60, .max = 160},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 58, .max = 158},
+ .p = {.min = 28, .max = 140},
+ .p1 = {.min = 2, .max = 10},
+ .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14},
+ .find_pll = gma_find_best_pll,
+ },
+ { /* CDV_SINGLE_LVDS_100MHz */
+ .dot = {.min = 20000, .max = 115500},
+ .vco = {.min = 1800000, .max = 3600000},
+ .n = {.min = 2, .max = 6},
+ .m = {.min = 60, .max = 160},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 58, .max = 158},
+ .p = {.min = 28, .max = 140},
+ .p1 = {.min = 2, .max = 10},
+ /* The single-channel range is 25-112Mhz, and dual-channel
+ * is 80-224Mhz. Prefer single channel as much as possible.
+ */
+ .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14},
+ .find_pll = gma_find_best_pll,
+ },
+ { /* CDV_DAC_HDMI_27MHz */
+ .dot = {.min = 20000, .max = 400000},
+ .vco = {.min = 1809000, .max = 3564000},
+ .n = {.min = 1, .max = 1},
+ .m = {.min = 67, .max = 132},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 65, .max = 130},
+ .p = {.min = 5, .max = 90},
+ .p1 = {.min = 1, .max = 9},
+ .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
+ .find_pll = gma_find_best_pll,
+ },
+ { /* CDV_DAC_HDMI_96MHz */
+ .dot = {.min = 20000, .max = 400000},
+ .vco = {.min = 1800000, .max = 3600000},
+ .n = {.min = 2, .max = 6},
+ .m = {.min = 60, .max = 160},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 58, .max = 158},
+ .p = {.min = 5, .max = 100},
+ .p1 = {.min = 1, .max = 10},
+ .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
+ .find_pll = gma_find_best_pll,
+ },
+ { /* CDV_DP_27MHz */
+ .dot = {.min = 160000, .max = 272000},
+ .vco = {.min = 1809000, .max = 3564000},
+ .n = {.min = 1, .max = 1},
+ .m = {.min = 67, .max = 132},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 65, .max = 130},
+ .p = {.min = 5, .max = 90},
+ .p1 = {.min = 1, .max = 9},
+ .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 10},
+ .find_pll = cdv_intel_find_dp_pll,
+ },
+ { /* CDV_DP_100MHz */
+ .dot = {.min = 160000, .max = 272000},
+ .vco = {.min = 1800000, .max = 3600000},
+ .n = {.min = 2, .max = 6},
+ .m = {.min = 60, .max = 164},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 58, .max = 162},
+ .p = {.min = 5, .max = 100},
+ .p1 = {.min = 1, .max = 10},
+ .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 10},
+ .find_pll = cdv_intel_find_dp_pll,
+ }
+};
+
+#define _wait_for(COND, MS, W) ({ \
+ unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
+ int ret__ = 0; \
+ while (!(COND)) { \
+ if (time_after(jiffies, timeout__)) { \
+ ret__ = -ETIMEDOUT; \
+ break; \
+ } \
+ if (W && !in_dbg_master()) \
+ msleep(W); \
+ } \
+ ret__; \
+})
+
+#define wait_for(COND, MS) _wait_for(COND, MS, 1)
+
+
+int cdv_sb_read(struct drm_device *dev, u32 reg, u32 *val)
+{
+ int ret;
+
+ ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+ if (ret) {
+ DRM_ERROR("timeout waiting for SB to idle before read\n");
+ return ret;
+ }
+
+ REG_WRITE(SB_ADDR, reg);
+ REG_WRITE(SB_PCKT,
+ SET_FIELD(SB_OPCODE_READ, SB_OPCODE) |
+ SET_FIELD(SB_DEST_DPLL, SB_DEST) |
+ SET_FIELD(0xf, SB_BYTE_ENABLE));
+
+ ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+ if (ret) {
+ DRM_ERROR("timeout waiting for SB to idle after read\n");
+ return ret;
+ }
+
+ *val = REG_READ(SB_DATA);
+
+ return 0;
+}
+
+int cdv_sb_write(struct drm_device *dev, u32 reg, u32 val)
+{
+ int ret;
+ static bool dpio_debug = true;
+ u32 temp;
+
+ if (dpio_debug) {
+ if (cdv_sb_read(dev, reg, &temp) == 0)
+ DRM_DEBUG_KMS("0x%08x: 0x%08x (before)\n", reg, temp);
+ DRM_DEBUG_KMS("0x%08x: 0x%08x\n", reg, val);
+ }
+
+ ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+ if (ret) {
+ DRM_ERROR("timeout waiting for SB to idle before write\n");
+ return ret;
+ }
+
+ REG_WRITE(SB_ADDR, reg);
+ REG_WRITE(SB_DATA, val);
+ REG_WRITE(SB_PCKT,
+ SET_FIELD(SB_OPCODE_WRITE, SB_OPCODE) |
+ SET_FIELD(SB_DEST_DPLL, SB_DEST) |
+ SET_FIELD(0xf, SB_BYTE_ENABLE));
+
+ ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+ if (ret) {
+ DRM_ERROR("timeout waiting for SB to idle after write\n");
+ return ret;
+ }
+
+ if (dpio_debug) {
+ if (cdv_sb_read(dev, reg, &temp) == 0)
+ DRM_DEBUG_KMS("0x%08x: 0x%08x (after)\n", reg, temp);
+ }
+
+ return 0;
+}
+
+/* Reset the DPIO configuration register. The BIOS does this at every
+ * mode set.
+ */
+void cdv_sb_reset(struct drm_device *dev)
+{
+
+ REG_WRITE(DPIO_CFG, 0);
+ REG_READ(DPIO_CFG);
+ REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N);
+}
+
+/* Unlike most Intel display engines, on Cedarview the DPLL registers
+ * are behind this sideband bus. They must be programmed while the
+ * DPLL reference clock is on in the DPLL control register, but before
+ * the DPLL is enabled in the DPLL control register.
+ */
+static int
+cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
+ struct gma_clock_t *clock, bool is_lvds, u32 ddi_select)
+{
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int pipe = gma_crtc->pipe;
+ u32 m, n_vco, p;
+ int ret = 0;
+ int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+ int ref_sfr = (pipe == 0) ? SB_REF_DPLLA : SB_REF_DPLLB;
+ u32 ref_value;
+ u32 lane_reg, lane_value;
+
+ cdv_sb_reset(dev);
+
+ REG_WRITE(dpll_reg, DPLL_SYNCLOCK_ENABLE | DPLL_VGA_MODE_DIS);
+
+ udelay(100);
+
+ /* Follow the BIOS and write the REF/SFR Register. Hardcoded value */
+ ref_value = 0x68A701;
+
+ cdv_sb_write(dev, SB_REF_SFR(pipe), ref_value);
+
+ /* We don't know what the other fields of these regs are, so
+ * leave them in place.
+ */
+ /*
+ * The BIT 14:13 of 0x8010/0x8030 is used to select the ref clk
+ * for the pipe A/B. Display spec 1.06 has wrong definition.
+ * Correct definition is like below:
+ *
+ * refclka mean use clock from same PLL
+ *
+ * if DPLLA sets 01 and DPLLB sets 01, they use clock from their pll
+ *
+ * if DPLLA sets 01 and DPLLB sets 02, both use clk from DPLLA
+ *
+ */
+ ret = cdv_sb_read(dev, ref_sfr, &ref_value);
+ if (ret)
+ return ret;
+ ref_value &= ~(REF_CLK_MASK);
+
+ /* use DPLL_A for pipeB on CRT/HDMI */
+ if (pipe == 1 && !is_lvds && !(ddi_select & DP_MASK)) {
+ DRM_DEBUG_KMS("use DPLLA for pipe B\n");
+ ref_value |= REF_CLK_DPLLA;
+ } else {
+ DRM_DEBUG_KMS("use their DPLL for pipe A/B\n");
+ ref_value |= REF_CLK_DPLL;
+ }
+ ret = cdv_sb_write(dev, ref_sfr, ref_value);
+ if (ret)
+ return ret;
+
+ ret = cdv_sb_read(dev, SB_M(pipe), &m);
+ if (ret)
+ return ret;
+ m &= ~SB_M_DIVIDER_MASK;
+ m |= ((clock->m2) << SB_M_DIVIDER_SHIFT);
+ ret = cdv_sb_write(dev, SB_M(pipe), m);
+ if (ret)
+ return ret;
+
+ ret = cdv_sb_read(dev, SB_N_VCO(pipe), &n_vco);
+ if (ret)
+ return ret;
+
+ /* Follow the BIOS to program the N_DIVIDER REG */
+ n_vco &= 0xFFFF;
+ n_vco |= 0x107;
+ n_vco &= ~(SB_N_VCO_SEL_MASK |
+ SB_N_DIVIDER_MASK |
+ SB_N_CB_TUNE_MASK);
+
+ n_vco |= ((clock->n) << SB_N_DIVIDER_SHIFT);
+
+ if (clock->vco < 2250000) {
+ n_vco |= (2 << SB_N_CB_TUNE_SHIFT);
+ n_vco |= (0 << SB_N_VCO_SEL_SHIFT);
+ } else if (clock->vco < 2750000) {
+ n_vco |= (1 << SB_N_CB_TUNE_SHIFT);
+ n_vco |= (1 << SB_N_VCO_SEL_SHIFT);
+ } else if (clock->vco < 3300000) {
+ n_vco |= (0 << SB_N_CB_TUNE_SHIFT);
+ n_vco |= (2 << SB_N_VCO_SEL_SHIFT);
+ } else {
+ n_vco |= (0 << SB_N_CB_TUNE_SHIFT);
+ n_vco |= (3 << SB_N_VCO_SEL_SHIFT);
+ }
+
+ ret = cdv_sb_write(dev, SB_N_VCO(pipe), n_vco);
+ if (ret)
+ return ret;
+
+ ret = cdv_sb_read(dev, SB_P(pipe), &p);
+ if (ret)
+ return ret;
+ p &= ~(SB_P2_DIVIDER_MASK | SB_P1_DIVIDER_MASK);
+ p |= SET_FIELD(clock->p1, SB_P1_DIVIDER);
+ switch (clock->p2) {
+ case 5:
+ p |= SET_FIELD(SB_P2_5, SB_P2_DIVIDER);
+ break;
+ case 10:
+ p |= SET_FIELD(SB_P2_10, SB_P2_DIVIDER);
+ break;
+ case 14:
+ p |= SET_FIELD(SB_P2_14, SB_P2_DIVIDER);
+ break;
+ case 7:
+ p |= SET_FIELD(SB_P2_7, SB_P2_DIVIDER);
+ break;
+ default:
+ DRM_ERROR("Bad P2 clock: %d\n", clock->p2);
+ return -EINVAL;
+ }
+ ret = cdv_sb_write(dev, SB_P(pipe), p);
+ if (ret)
+ return ret;
+
+ if (ddi_select) {
+ if ((ddi_select & DDI_MASK) == DDI0_SELECT) {
+ lane_reg = PSB_LANE0;
+ cdv_sb_read(dev, lane_reg, &lane_value);
+ lane_value &= ~(LANE_PLL_MASK);
+ lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
+ cdv_sb_write(dev, lane_reg, lane_value);
+
+ lane_reg = PSB_LANE1;
+ cdv_sb_read(dev, lane_reg, &lane_value);
+ lane_value &= ~(LANE_PLL_MASK);
+ lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
+ cdv_sb_write(dev, lane_reg, lane_value);
+ } else {
+ lane_reg = PSB_LANE2;
+ cdv_sb_read(dev, lane_reg, &lane_value);
+ lane_value &= ~(LANE_PLL_MASK);
+ lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
+ cdv_sb_write(dev, lane_reg, lane_value);
+
+ lane_reg = PSB_LANE3;
+ cdv_sb_read(dev, lane_reg, &lane_value);
+ lane_value &= ~(LANE_PLL_MASK);
+ lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
+ cdv_sb_write(dev, lane_reg, lane_value);
+ }
+ }
+ return 0;
+}
+
+static const struct gma_limit_t *cdv_intel_limit(struct drm_crtc *crtc,
+ int refclk)
+{
+ const struct gma_limit_t *limit;
+ if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ /*
+ * Now only single-channel LVDS is supported on CDV. If it is
+ * incorrect, please add the dual-channel LVDS.
+ */
+ if (refclk == 96000)
+ limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96];
+ else
+ limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100];
+ } else if (gma_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+ gma_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
+ if (refclk == 27000)
+ limit = &cdv_intel_limits[CDV_LIMIT_DP_27];
+ else
+ limit = &cdv_intel_limits[CDV_LIMIT_DP_100];
+ } else {
+ if (refclk == 27000)
+ limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_27];
+ else
+ limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_96];
+ }
+ return limit;
+}
+
+/* m1 is reserved as 0 in CDV, n is a ring counter */
+static void cdv_intel_clock(int refclk, struct gma_clock_t *clock)
+{
+ clock->m = clock->m2 + 2;
+ clock->p = clock->p1 * clock->p2;
+ clock->vco = (refclk * clock->m) / clock->n;
+ clock->dot = clock->vco / clock->p;
+}
+
+static bool cdv_intel_find_dp_pll(const struct gma_limit_t *limit,
+ struct drm_crtc *crtc, int target,
+ int refclk,
+ struct gma_clock_t *best_clock)
+{
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ struct gma_clock_t clock;
+
+ switch (refclk) {
+ case 27000:
+ if (target < 200000) {
+ clock.p1 = 2;
+ clock.p2 = 10;
+ clock.n = 1;
+ clock.m1 = 0;
+ clock.m2 = 118;
+ } else {
+ clock.p1 = 1;
+ clock.p2 = 10;
+ clock.n = 1;
+ clock.m1 = 0;
+ clock.m2 = 98;
+ }
+ break;
+
+ case 100000:
+ if (target < 200000) {
+ clock.p1 = 2;
+ clock.p2 = 10;
+ clock.n = 5;
+ clock.m1 = 0;
+ clock.m2 = 160;
+ } else {
+ clock.p1 = 1;
+ clock.p2 = 10;
+ clock.n = 5;
+ clock.m1 = 0;
+ clock.m2 = 133;
+ }
+ break;
+
+ default:
+ return false;
+ }
+
+ gma_crtc->clock_funcs->clock(refclk, &clock);
+ memcpy(best_clock, &clock, sizeof(struct gma_clock_t));
+ return true;
+}
+
+#define FIFO_PIPEA (1 << 0)
+#define FIFO_PIPEB (1 << 1)
+
+static bool cdv_intel_pipe_enabled(struct drm_device *dev, int pipe)
+{
+ struct drm_crtc *crtc;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct gma_crtc *gma_crtc = NULL;
+
+ crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+ gma_crtc = to_gma_crtc(crtc);
+
+ if (crtc->primary->fb == NULL || !gma_crtc->active)
+ return false;
+ return true;
+}
+
+void cdv_disable_sr(struct drm_device *dev)
+{
+ if (REG_READ(FW_BLC_SELF) & FW_BLC_SELF_EN) {
+
+ /* Disable self-refresh before adjust WM */
+ REG_WRITE(FW_BLC_SELF, (REG_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN));
+ REG_READ(FW_BLC_SELF);
+
+ gma_wait_for_vblank(dev);
+
+ /* Cedarview workaround to write ovelay plane, which force to leave
+ * MAX_FIFO state.
+ */
+ REG_WRITE(OV_OVADD, 0/*dev_priv->ovl_offset*/);
+ REG_READ(OV_OVADD);
+
+ gma_wait_for_vblank(dev);
+ }
+
+}
+
+void cdv_update_wm(struct drm_device *dev, struct drm_crtc *crtc)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+
+ /* Is only one pipe enabled? */
+ if (cdv_intel_pipe_enabled(dev, 0) ^ cdv_intel_pipe_enabled(dev, 1)) {
+ u32 fw;
+
+ fw = REG_READ(DSPFW1);
+ fw &= ~DSP_FIFO_SR_WM_MASK;
+ fw |= (0x7e << DSP_FIFO_SR_WM_SHIFT);
+ fw &= ~CURSOR_B_FIFO_WM_MASK;
+ fw |= (0x4 << CURSOR_B_FIFO_WM_SHIFT);
+ REG_WRITE(DSPFW1, fw);
+
+ fw = REG_READ(DSPFW2);
+ fw &= ~CURSOR_A_FIFO_WM_MASK;
+ fw |= (0x6 << CURSOR_A_FIFO_WM_SHIFT);
+ fw &= ~DSP_PLANE_C_FIFO_WM_MASK;
+ fw |= (0x8 << DSP_PLANE_C_FIFO_WM_SHIFT);
+ REG_WRITE(DSPFW2, fw);
+
+ REG_WRITE(DSPFW3, 0x36000000);
+
+ /* ignore FW4 */
+
+ /* Is pipe b lvds ? */
+ if (gma_crtc->pipe == 1 &&
+ gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ REG_WRITE(DSPFW5, 0x00040330);
+ } else {
+ fw = (3 << DSP_PLANE_B_FIFO_WM1_SHIFT) |
+ (4 << DSP_PLANE_A_FIFO_WM1_SHIFT) |
+ (3 << CURSOR_B_FIFO_WM1_SHIFT) |
+ (4 << CURSOR_FIFO_SR_WM1_SHIFT);
+ REG_WRITE(DSPFW5, fw);
+ }
+
+ REG_WRITE(DSPFW6, 0x10);
+
+ gma_wait_for_vblank(dev);
+
+ /* enable self-refresh for single pipe active */
+ REG_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+ REG_READ(FW_BLC_SELF);
+ gma_wait_for_vblank(dev);
+
+ } else {
+
+ /* HW team suggested values... */
+ REG_WRITE(DSPFW1, 0x3f880808);
+ REG_WRITE(DSPFW2, 0x0b020202);
+ REG_WRITE(DSPFW3, 0x24000000);
+ REG_WRITE(DSPFW4, 0x08030202);
+ REG_WRITE(DSPFW5, 0x01010101);
+ REG_WRITE(DSPFW6, 0x1d0);
+
+ gma_wait_for_vblank(dev);
+
+ dev_priv->ops->disable_sr(dev);
+ }
+}
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int cdv_intel_panel_fitter_pipe(struct drm_device *dev)
+{
+ u32 pfit_control;
+
+ pfit_control = REG_READ(PFIT_CONTROL);
+
+ /* See if the panel fitter is in use */
+ if ((pfit_control & PFIT_ENABLE) == 0)
+ return -1;
+ return (pfit_control >> 29) & 0x3;
+}
+
+static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int pipe = gma_crtc->pipe;
+ const struct psb_offset *map = &dev_priv->regmap[pipe];
+ int refclk;
+ struct gma_clock_t clock;
+ u32 dpll = 0, dspcntr, pipeconf;
+ bool ok;
+ bool is_crt = false, is_lvds = false, is_tv = false;
+ bool is_hdmi = false, is_dp = false;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *connector;
+ const struct gma_limit_t *limit;
+ u32 ddi_select = 0;
+ bool is_edp = false;
+
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ struct gma_encoder *gma_encoder =
+ gma_attached_encoder(connector);
+
+ if (!connector->encoder
+ || connector->encoder->crtc != crtc)
+ continue;
+
+ ddi_select = gma_encoder->ddi_select;
+ switch (gma_encoder->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = true;
+ break;
+ case INTEL_OUTPUT_TVOUT:
+ is_tv = true;
+ break;
+ case INTEL_OUTPUT_ANALOG:
+ is_crt = true;
+ break;
+ case INTEL_OUTPUT_HDMI:
+ is_hdmi = true;
+ break;
+ case INTEL_OUTPUT_DISPLAYPORT:
+ is_dp = true;
+ break;
+ case INTEL_OUTPUT_EDP:
+ is_edp = true;
+ break;
+ default:
+ DRM_ERROR("invalid output type.\n");
+ return 0;
+ }
+ }
+
+ if (dev_priv->dplla_96mhz)
+ /* low-end sku, 96/100 mhz */
+ refclk = 96000;
+ else
+ /* high-end sku, 27/100 mhz */
+ refclk = 27000;
+ if (is_dp || is_edp) {
+ /*
+ * Based on the spec the low-end SKU has only CRT/LVDS. So it is
+ * unnecessary to consider it for DP/eDP.
+ * On the high-end SKU, it will use the 27/100M reference clk
+ * for DP/eDP. When using SSC clock, the ref clk is 100MHz.Otherwise
+ * it will be 27MHz. From the VBIOS code it seems that the pipe A choose
+ * 27MHz for DP/eDP while the Pipe B chooses the 100MHz.
+ */
+ if (pipe == 0)
+ refclk = 27000;
+ else
+ refclk = 100000;
+ }
+
+ if (is_lvds && dev_priv->lvds_use_ssc) {
+ refclk = dev_priv->lvds_ssc_freq * 1000;
+ DRM_DEBUG_KMS("Use SSC reference clock %d Mhz\n", dev_priv->lvds_ssc_freq);
+ }
+
+ drm_mode_debug_printmodeline(adjusted_mode);
+
+ limit = gma_crtc->clock_funcs->limit(crtc, refclk);
+
+ ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk,
+ &clock);
+ if (!ok) {
+ DRM_ERROR("Couldn't find PLL settings for mode! target: %d, actual: %d",
+ adjusted_mode->clock, clock.dot);
+ return 0;
+ }
+
+ dpll = DPLL_VGA_MODE_DIS;
+ if (is_tv) {
+ /* XXX: just matching BIOS for now */
+/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
+ dpll |= 3;
+ }
+/* dpll |= PLL_REF_INPUT_DREFCLK; */
+
+ if (is_dp || is_edp) {
+ cdv_intel_dp_set_m_n(crtc, mode, adjusted_mode);
+ } else {
+ REG_WRITE(PIPE_GMCH_DATA_M(pipe), 0);
+ REG_WRITE(PIPE_GMCH_DATA_N(pipe), 0);
+ REG_WRITE(PIPE_DP_LINK_M(pipe), 0);
+ REG_WRITE(PIPE_DP_LINK_N(pipe), 0);
+ }
+
+ dpll |= DPLL_SYNCLOCK_ENABLE;
+/* if (is_lvds)
+ dpll |= DPLLB_MODE_LVDS;
+ else
+ dpll |= DPLLB_MODE_DAC_SERIAL; */
+ /* dpll |= (2 << 11); */
+
+ /* setup pipeconf */
+ pipeconf = REG_READ(map->conf);
+
+ pipeconf &= ~(PIPE_BPC_MASK);
+ if (is_edp) {
+ switch (dev_priv->edp.bpp) {
+ case 24:
+ pipeconf |= PIPE_8BPC;
+ break;
+ case 18:
+ pipeconf |= PIPE_6BPC;
+ break;
+ case 30:
+ pipeconf |= PIPE_10BPC;
+ break;
+ default:
+ pipeconf |= PIPE_8BPC;
+ break;
+ }
+ } else if (is_lvds) {
+ /* the BPC will be 6 if it is 18-bit LVDS panel */
+ if ((REG_READ(LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
+ pipeconf |= PIPE_8BPC;
+ else
+ pipeconf |= PIPE_6BPC;
+ } else
+ pipeconf |= PIPE_8BPC;
+
+ /* Set up the display plane register */
+ dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+ if (pipe == 0)
+ dspcntr |= DISPPLANE_SEL_PIPE_A;
+ else
+ dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+ dspcntr |= DISPLAY_PLANE_ENABLE;
+ pipeconf |= PIPEACONF_ENABLE;
+
+ REG_WRITE(map->dpll, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE);
+ REG_READ(map->dpll);
+
+ cdv_dpll_set_clock_cdv(dev, crtc, &clock, is_lvds, ddi_select);
+
+ udelay(150);
+
+
+ /* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+ if (is_lvds) {
+ u32 lvds = REG_READ(LVDS);
+
+ lvds |=
+ LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP |
+ LVDS_PIPEB_SELECT;
+ /* Set the B0-B3 data pairs corresponding to
+ * whether we're going to
+ * set the DPLLs for dual-channel mode or not.
+ */
+ if (clock.p2 == 7)
+ lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+ else
+ lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+ /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+ * appropriately here, but we need to look more
+ * thoroughly into how panels behave in the two modes.
+ */
+
+ REG_WRITE(LVDS, lvds);
+ REG_READ(LVDS);
+ }
+
+ dpll |= DPLL_VCO_ENABLE;
+
+ /* Disable the panel fitter if it was on our pipe */
+ if (cdv_intel_panel_fitter_pipe(dev) == pipe)
+ REG_WRITE(PFIT_CONTROL, 0);
+
+ DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+ drm_mode_debug_printmodeline(mode);
+
+ REG_WRITE(map->dpll,
+ (REG_READ(map->dpll) & ~DPLL_LOCK) | DPLL_VCO_ENABLE);
+ REG_READ(map->dpll);
+ /* Wait for the clocks to stabilize. */
+ udelay(150); /* 42 usec w/o calibration, 110 with. rounded up. */
+
+ if (!(REG_READ(map->dpll) & DPLL_LOCK)) {
+ dev_err(dev->dev, "Failed to get DPLL lock\n");
+ return -EBUSY;
+ }
+
+ {
+ int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+ REG_WRITE(map->dpll_md, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+ }
+
+ REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) |
+ ((adjusted_mode->crtc_htotal - 1) << 16));
+ REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) |
+ ((adjusted_mode->crtc_hblank_end - 1) << 16));
+ REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) |
+ ((adjusted_mode->crtc_hsync_end - 1) << 16));
+ REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) |
+ ((adjusted_mode->crtc_vtotal - 1) << 16));
+ REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) |
+ ((adjusted_mode->crtc_vblank_end - 1) << 16));
+ REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) |
+ ((adjusted_mode->crtc_vsync_end - 1) << 16));
+ /* pipesrc and dspsize control the size that is scaled from,
+ * which should always be the user's requested size.
+ */
+ REG_WRITE(map->size,
+ ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
+ REG_WRITE(map->pos, 0);
+ REG_WRITE(map->src,
+ ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+ REG_WRITE(map->conf, pipeconf);
+ REG_READ(map->conf);
+
+ gma_wait_for_vblank(dev);
+
+ REG_WRITE(map->cntr, dspcntr);
+
+ /* Flush the plane changes */
+ {
+ const struct drm_crtc_helper_funcs *crtc_funcs =
+ crtc->helper_private;
+ crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+ }
+
+ gma_wait_for_vblank(dev);
+
+ return 0;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
+
+/* FIXME: why are we using this, should it be cdv_ in this tree ? */
+
+static void i8xx_clock(int refclk, struct gma_clock_t *clock)
+{
+ clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+ clock->p = clock->p1 * clock->p2;
+ clock->vco = refclk * clock->m / (clock->n + 2);
+ clock->dot = clock->vco / clock->p;
+}
+
+/* Returns the clock of the currently programmed mode of the given pipe. */
+static int cdv_intel_crtc_clock_get(struct drm_device *dev,
+ struct drm_crtc *crtc)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int pipe = gma_crtc->pipe;
+ const struct psb_offset *map = &dev_priv->regmap[pipe];
+ u32 dpll;
+ u32 fp;
+ struct gma_clock_t clock;
+ bool is_lvds;
+ struct psb_pipe *p = &dev_priv->regs.pipe[pipe];
+
+ if (gma_power_begin(dev, false)) {
+ dpll = REG_READ(map->dpll);
+ if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+ fp = REG_READ(map->fp0);
+ else
+ fp = REG_READ(map->fp1);
+ is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN);
+ gma_power_end(dev);
+ } else {
+ dpll = p->dpll;
+ if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+ fp = p->fp0;
+ else
+ fp = p->fp1;
+
+ is_lvds = (pipe == 1) &&
+ (dev_priv->regs.psb.saveLVDS & LVDS_PORT_EN);
+ }
+
+ clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
+ clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
+ clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
+
+ if (is_lvds) {
+ clock.p1 =
+ ffs((dpll &
+ DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT);
+ if (clock.p1 == 0) {
+ clock.p1 = 4;
+ dev_err(dev->dev, "PLL %d\n", dpll);
+ }
+ clock.p2 = 14;
+
+ if ((dpll & PLL_REF_INPUT_MASK) ==
+ PLLB_REF_INPUT_SPREADSPECTRUMIN) {
+ /* XXX: might not be 66MHz */
+ i8xx_clock(66000, &clock);
+ } else
+ i8xx_clock(48000, &clock);
+ } else {
+ if (dpll & PLL_P1_DIVIDE_BY_TWO)
+ clock.p1 = 2;
+ else {
+ clock.p1 =
+ ((dpll &
+ DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
+ }
+ if (dpll & PLL_P2_DIVIDE_BY_4)
+ clock.p2 = 4;
+ else
+ clock.p2 = 2;
+
+ i8xx_clock(48000, &clock);
+ }
+
+ /* XXX: It would be nice to validate the clocks, but we can't reuse
+ * i830PllIsValid() because it relies on the xf86_config connector
+ * configuration being accurate, which it isn't necessarily.
+ */
+
+ return clock.dot;
+}
+
+/** Returns the currently programmed mode of the given pipe. */
+struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
+ struct drm_crtc *crtc)
+{
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int pipe = gma_crtc->pipe;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct psb_pipe *p = &dev_priv->regs.pipe[pipe];
+ const struct psb_offset *map = &dev_priv->regmap[pipe];
+ struct drm_display_mode *mode;
+ int htot;
+ int hsync;
+ int vtot;
+ int vsync;
+
+ if (gma_power_begin(dev, false)) {
+ htot = REG_READ(map->htotal);
+ hsync = REG_READ(map->hsync);
+ vtot = REG_READ(map->vtotal);
+ vsync = REG_READ(map->vsync);
+ gma_power_end(dev);
+ } else {
+ htot = p->htotal;
+ hsync = p->hsync;
+ vtot = p->vtotal;
+ vsync = p->vsync;
+ }
+
+ mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+ if (!mode)
+ return NULL;
+
+ mode->clock = cdv_intel_crtc_clock_get(dev, crtc);
+ mode->hdisplay = (htot & 0xffff) + 1;
+ mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
+ mode->hsync_start = (hsync & 0xffff) + 1;
+ mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
+ mode->vdisplay = (vtot & 0xffff) + 1;
+ mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
+ mode->vsync_start = (vsync & 0xffff) + 1;
+ mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
+
+ drm_mode_set_name(mode);
+ drm_mode_set_crtcinfo(mode, 0);
+
+ return mode;
+}
+
+const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = {
+ .dpms = gma_crtc_dpms,
+ .mode_fixup = gma_crtc_mode_fixup,
+ .mode_set = cdv_intel_crtc_mode_set,
+ .mode_set_base = gma_pipe_set_base,
+ .prepare = gma_crtc_prepare,
+ .commit = gma_crtc_commit,
+ .disable = gma_crtc_disable,
+};
+
+const struct drm_crtc_funcs cdv_intel_crtc_funcs = {
+ .save = gma_crtc_save,
+ .restore = gma_crtc_restore,
+ .cursor_set = gma_crtc_cursor_set,
+ .cursor_move = gma_crtc_cursor_move,
+ .gamma_set = gma_crtc_gamma_set,
+ .set_config = gma_crtc_set_config,
+ .destroy = gma_crtc_destroy,
+};
+
+const struct gma_clock_funcs cdv_clock_funcs = {
+ .clock = cdv_intel_clock,
+ .limit = cdv_intel_limit,
+ .pll_is_valid = gma_pll_is_valid,
+};
Code Review / kvmfornfv.git / blobdiff