These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / drivers / gpu / drm / exynos / exynos_drm_drv.h
index 29e3fb7..f1eda7f 100644 (file)
 #define MAX_PLANE      5
 #define MAX_FB_BUFFER  4
 
+#define DEFAULT_WIN    0
+
 #define to_exynos_crtc(x)      container_of(x, struct exynos_drm_crtc, base)
 #define to_exynos_plane(x)     container_of(x, struct exynos_drm_plane, base)
 
-/* This enumerates device type. */
-enum exynos_drm_device_type {
-       EXYNOS_DEVICE_TYPE_NONE,
-       EXYNOS_DEVICE_TYPE_CRTC,
-       EXYNOS_DEVICE_TYPE_CONNECTOR,
-};
-
 /* this enumerates display type. */
 enum exynos_drm_output_type {
        EXYNOS_DISPLAY_TYPE_NONE,
@@ -51,28 +46,17 @@ enum exynos_drm_output_type {
  *     - the unit is screen coordinates.
  * @src_y: offset y on a framebuffer to be displayed.
  *     - the unit is screen coordinates.
- * @src_width: width of a partial image to be displayed from framebuffer.
- * @src_height: height of a partial image to be displayed from framebuffer.
- * @fb_width: width of a framebuffer.
- * @fb_height: height of a framebuffer.
+ * @src_w: width of a partial image to be displayed from framebuffer.
+ * @src_h: height of a partial image to be displayed from framebuffer.
  * @crtc_x: offset x on hardware screen.
  * @crtc_y: offset y on hardware screen.
- * @crtc_width: window width to be displayed (hardware screen).
- * @crtc_height: window height to be displayed (hardware screen).
- * @mode_width: width of screen mode.
- * @mode_height: height of screen mode.
+ * @crtc_w: window width to be displayed (hardware screen).
+ * @crtc_h: window height to be displayed (hardware screen).
  * @h_ratio: horizontal scaling ratio, 16.16 fixed point
  * @v_ratio: vertical scaling ratio, 16.16 fixed point
- * @refresh: refresh rate.
- * @scan_flag: interlace or progressive way.
- *     (it could be DRM_MODE_FLAG_*)
- * @bpp: pixel size.(in bit)
- * @pixel_format: fourcc pixel format of this overlay
  * @dma_addr: array of bus(accessed by dma) address to the memory region
  *           allocated for a overlay.
  * @zpos: order of overlay layer(z position).
- * @enabled: enabled or not.
- * @resume: to resume or not.
  *
  * this structure is common to exynos SoC and its contents would be copied
  * to hardware specific overlay info.
@@ -82,90 +66,34 @@ struct exynos_drm_plane {
        struct drm_plane base;
        unsigned int src_x;
        unsigned int src_y;
-       unsigned int src_width;
-       unsigned int src_height;
-       unsigned int fb_width;
-       unsigned int fb_height;
+       unsigned int src_w;
+       unsigned int src_h;
        unsigned int crtc_x;
        unsigned int crtc_y;
-       unsigned int crtc_width;
-       unsigned int crtc_height;
-       unsigned int mode_width;
-       unsigned int mode_height;
+       unsigned int crtc_w;
+       unsigned int crtc_h;
        unsigned int h_ratio;
        unsigned int v_ratio;
-       unsigned int refresh;
-       unsigned int scan_flag;
-       unsigned int bpp;
-       unsigned int pitch;
-       uint32_t pixel_format;
        dma_addr_t dma_addr[MAX_FB_BUFFER];
        unsigned int zpos;
-
-       bool enabled:1;
-       bool resume:1;
-};
-
-/*
- * Exynos DRM Display Structure.
- *     - this structure is common to analog tv, digital tv and lcd panel.
- *
- * @create_connector: initialize and register a new connector
- * @remove: cleans up the display for removal
- * @mode_fixup: fix mode data comparing to hw specific display mode.
- * @mode_set: convert drm_display_mode to hw specific display mode and
- *           would be called by encoder->mode_set().
- * @check_mode: check if mode is valid or not.
- * @dpms: display device on or off.
- * @commit: apply changes to hw
- */
-struct exynos_drm_display;
-struct exynos_drm_display_ops {
-       int (*create_connector)(struct exynos_drm_display *display,
-                               struct drm_encoder *encoder);
-       void (*remove)(struct exynos_drm_display *display);
-       void (*mode_fixup)(struct exynos_drm_display *display,
-                               struct drm_connector *connector,
-                               const struct drm_display_mode *mode,
-                               struct drm_display_mode *adjusted_mode);
-       void (*mode_set)(struct exynos_drm_display *display,
-                               struct drm_display_mode *mode);
-       int (*check_mode)(struct exynos_drm_display *display,
-                               struct drm_display_mode *mode);
-       void (*dpms)(struct exynos_drm_display *display, int mode);
-       void (*commit)(struct exynos_drm_display *display);
-};
-
-/*
- * Exynos drm display structure, maps 1:1 with an encoder/connector
- *
- * @list: the list entry for this manager
- * @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI.
- * @encoder: encoder object this display maps to
- * @connector: connector object this display maps to
- * @ops: pointer to callbacks for exynos drm specific functionality
- * @ctx: A pointer to the display's implementation specific context
- */
-struct exynos_drm_display {
-       struct list_head list;
-       enum exynos_drm_output_type type;
-       struct drm_encoder *encoder;
-       struct drm_connector *connector;
-       struct exynos_drm_display_ops *ops;
+       struct drm_framebuffer *pending_fb;
 };
 
 /*
  * Exynos drm crtc ops
  *
- * @dpms: control device power.
- * @mode_fixup: fix mode data before applying it
+ * @enable: enable the device
+ * @disable: disable the device
  * @commit: set current hw specific display mode to hw.
  * @enable_vblank: specific driver callback for enabling vblank interrupt.
  * @disable_vblank: specific driver callback for disabling vblank interrupt.
  * @wait_for_vblank: wait for vblank interrupt to make sure that
  *     hardware overlay is updated.
- * @win_commit: apply hardware specific overlay data to registers.
- * @win_disable: disable hardware specific overlay.
+ * @atomic_check: validate state
+ * @atomic_begin: prepare a window to receive a update
+ * @atomic_flush: mark the end of a window update
+ * @update_plane: apply hardware specific overlay data to registers.
+ * @disable_plane: disable hardware specific overlay.
  * @te_handler: trigger to transfer video image at the tearing effect
  *     synchronization signal if there is a page flip request.
  * @clock_enable: optional function enabling/disabling display domain clock,
@@ -175,16 +103,22 @@ struct exynos_drm_display {
  */
 struct exynos_drm_crtc;
 struct exynos_drm_crtc_ops {
-       void (*dpms)(struct exynos_drm_crtc *crtc, int mode);
-       bool (*mode_fixup)(struct exynos_drm_crtc *crtc,
-                               const struct drm_display_mode *mode,
-                               struct drm_display_mode *adjusted_mode);
+       void (*enable)(struct exynos_drm_crtc *crtc);
+       void (*disable)(struct exynos_drm_crtc *crtc);
        void (*commit)(struct exynos_drm_crtc *crtc);
        int (*enable_vblank)(struct exynos_drm_crtc *crtc);
        void (*disable_vblank)(struct exynos_drm_crtc *crtc);
        void (*wait_for_vblank)(struct exynos_drm_crtc *crtc);
-       void (*win_commit)(struct exynos_drm_crtc *crtc, unsigned int zpos);
-       void (*win_disable)(struct exynos_drm_crtc *crtc, unsigned int zpos);
+       int (*atomic_check)(struct exynos_drm_crtc *crtc,
+                           struct drm_crtc_state *state);
+       void (*atomic_begin)(struct exynos_drm_crtc *crtc,
+                             struct exynos_drm_plane *plane);
+       void (*update_plane)(struct exynos_drm_crtc *crtc,
+                            struct exynos_drm_plane *plane);
+       void (*disable_plane)(struct exynos_drm_crtc *crtc,
+                             struct exynos_drm_plane *plane);
+       void (*atomic_flush)(struct exynos_drm_crtc *crtc,
+                             struct exynos_drm_plane *plane);
        void (*te_handler)(struct exynos_drm_crtc *crtc);
        void (*clock_enable)(struct exynos_drm_crtc *crtc, bool enable);
 };
@@ -201,8 +135,10 @@ struct exynos_drm_crtc_ops {
  *     drm framework doesn't support multiple irq yet.
  *     we can refer to the crtc to current hardware interrupt occurred through
  *     this pipe value.
- * @dpms: store the crtc dpms value
+ * @enabled: if the crtc is enabled or not
  * @event: vblank event that is currently queued for flip
+ * @wait_update: wait all pending planes updates to finish
+ * @pending_update: number of pending plane updates in this crtc
  * @ops: pointer to callbacks for exynos drm specific functionality
  * @ctx: A pointer to the crtc's implementation specific context
  */
@@ -210,9 +146,9 @@ struct exynos_drm_crtc {
        struct drm_crtc                 base;
        enum exynos_drm_output_type     type;
        unsigned int                    pipe;
-       unsigned int                    dpms;
-       wait_queue_head_t               pending_flip_queue;
        struct drm_pending_vblank_event *event;
+       wait_queue_head_t               wait_update;
+       atomic_t                        pending_update;
        const struct exynos_drm_crtc_ops        *ops;
        void                            *ctx;
 };
@@ -238,6 +174,9 @@ struct drm_exynos_file_private {
  * @da_space_size: size of device address space.
  *     if 0 then default value is used for it.
  * @pipe: the pipe number for this crtc/manager.
+ * @pending: the crtcs that have pending updates to finish
+ * @lock: protect access to @pending
+ * @wait: wait an atomic commit to finish
  */
 struct exynos_drm_private {
        struct drm_fb_helper *fb_helper;
@@ -253,6 +192,11 @@ struct exynos_drm_private {
        unsigned long da_space_size;
 
        unsigned int pipe;
+
+       /* for atomic commit */
+       u32                     pending;
+       spinlock_t              lock;
+       wait_queue_head_t       wait;
 };
 
 /*
@@ -293,47 +237,30 @@ int exynos_drm_device_subdrv_remove(struct drm_device *dev);
 int exynos_drm_subdrv_open(struct drm_device *dev, struct drm_file *file);
 void exynos_drm_subdrv_close(struct drm_device *dev, struct drm_file *file);
 
-#ifdef CONFIG_DRM_EXYNOS_IPP
-int exynos_platform_device_ipp_register(void);
-void exynos_platform_device_ipp_unregister(void);
-#else
-static inline int exynos_platform_device_ipp_register(void) { return 0; }
-static inline void exynos_platform_device_ipp_unregister(void) {}
-#endif
-
-
 #ifdef CONFIG_DRM_EXYNOS_DPI
-struct exynos_drm_display * exynos_dpi_probe(struct device *dev);
-int exynos_dpi_remove(struct exynos_drm_display *display);
+struct drm_encoder *exynos_dpi_probe(struct device *dev);
+int exynos_dpi_remove(struct drm_encoder *encoder);
+int exynos_dpi_bind(struct drm_device *dev, struct drm_encoder *encoder);
 #else
-static inline struct exynos_drm_display *
+static inline struct drm_encoder *
 exynos_dpi_probe(struct device *dev) { return NULL; }
-static inline int exynos_dpi_remove(struct exynos_drm_display *display)
+static inline int exynos_dpi_remove(struct drm_encoder *encoder)
+{
+       return 0;
+}
+static inline int exynos_dpi_bind(struct drm_device *dev,
+                                 struct drm_encoder *encoder)
 {
        return 0;
 }
 #endif
 
-#ifdef CONFIG_DRM_EXYNOS_VIDI
-int exynos_drm_probe_vidi(void);
-void exynos_drm_remove_vidi(void);
-#else
-static inline int exynos_drm_probe_vidi(void) { return 0; }
-static inline void exynos_drm_remove_vidi(void) {}
-#endif
-
-/* This function creates a encoder and a connector, and initializes them. */
-int exynos_drm_create_enc_conn(struct drm_device *dev,
-                               struct exynos_drm_display *display);
-
-int exynos_drm_component_add(struct device *dev,
-                               enum exynos_drm_device_type dev_type,
-                               enum exynos_drm_output_type out_type);
+int exynos_atomic_commit(struct drm_device *dev, struct drm_atomic_state *state,
+                        bool async);
 
-void exynos_drm_component_del(struct device *dev,
-                               enum exynos_drm_device_type dev_type);
 
 extern struct platform_driver fimd_driver;
+extern struct platform_driver exynos5433_decon_driver;
 extern struct platform_driver decon_driver;
 extern struct platform_driver dp_driver;
 extern struct platform_driver dsi_driver;
@@ -346,4 +273,5 @@ extern struct platform_driver fimc_driver;
 extern struct platform_driver rotator_driver;
 extern struct platform_driver gsc_driver;
 extern struct platform_driver ipp_driver;
+extern struct platform_driver mic_driver;
 #endif