--- /dev/null
+/*
+ * Chip register definitions for PCILynx chipset. Based on pcilynx.h
+ * from the Linux 1394 drivers, but modified a bit so the names here
+ * match the specification exactly (even though they have weird names,
+ * like xxx_OVER_FLOW, or arbitrary abbreviations like SNTRJ for "sent
+ * reject" etc.)
+ */
+
+#define PCILYNX_MAX_REGISTER 0xfff
+#define PCILYNX_MAX_MEMORY 0xffff
+
+#define PCI_LATENCY_CACHELINE 0x0c
+
+#define MISC_CONTROL 0x40
+#define MISC_CONTROL_SWRESET (1<<0)
+
+#define SERIAL_EEPROM_CONTROL 0x44
+
+#define PCI_INT_STATUS 0x48
+#define PCI_INT_ENABLE 0x4c
+/* status and enable have identical bit numbers */
+#define PCI_INT_INT_PEND (1<<31)
+#define PCI_INT_FRC_INT (1<<30)
+#define PCI_INT_SLV_ADR_PERR (1<<28)
+#define PCI_INT_SLV_DAT_PERR (1<<27)
+#define PCI_INT_MST_DAT_PERR (1<<26)
+#define PCI_INT_MST_DEV_TO (1<<25)
+#define PCI_INT_INT_SLV_TO (1<<23)
+#define PCI_INT_AUX_TO (1<<18)
+#define PCI_INT_AUX_INT (1<<17)
+#define PCI_INT_P1394_INT (1<<16)
+#define PCI_INT_DMA4_PCL (1<<9)
+#define PCI_INT_DMA4_HLT (1<<8)
+#define PCI_INT_DMA3_PCL (1<<7)
+#define PCI_INT_DMA3_HLT (1<<6)
+#define PCI_INT_DMA2_PCL (1<<5)
+#define PCI_INT_DMA2_HLT (1<<4)
+#define PCI_INT_DMA1_PCL (1<<3)
+#define PCI_INT_DMA1_HLT (1<<2)
+#define PCI_INT_DMA0_PCL (1<<1)
+#define PCI_INT_DMA0_HLT (1<<0)
+/* all DMA interrupts combined: */
+#define PCI_INT_DMA_ALL 0x3ff
+
+#define PCI_INT_DMA_HLT(chan) (1 << (chan * 2))
+#define PCI_INT_DMA_PCL(chan) (1 << (chan * 2 + 1))
+
+#define LBUS_ADDR 0xb4
+#define LBUS_ADDR_SEL_RAM (0x0<<16)
+#define LBUS_ADDR_SEL_ROM (0x1<<16)
+#define LBUS_ADDR_SEL_AUX (0x2<<16)
+#define LBUS_ADDR_SEL_ZV (0x3<<16)
+
+#define GPIO_CTRL_A 0xb8
+#define GPIO_CTRL_B 0xbc
+#define GPIO_DATA_BASE 0xc0
+
+#define DMA_BREG(base, chan) (base + chan * 0x20)
+#define DMA_SREG(base, chan) (base + chan * 0x10)
+
+#define PCL_NEXT_INVALID (1<<0)
+
+/* transfer commands */
+#define PCL_CMD_RCV (0x1<<24)
+#define PCL_CMD_RCV_AND_UPDATE (0xa<<24)
+#define PCL_CMD_XMT (0x2<<24)
+#define PCL_CMD_UNFXMT (0xc<<24)
+#define PCL_CMD_PCI_TO_LBUS (0x8<<24)
+#define PCL_CMD_LBUS_TO_PCI (0x9<<24)
+
+/* aux commands */
+#define PCL_CMD_NOP (0x0<<24)
+#define PCL_CMD_LOAD (0x3<<24)
+#define PCL_CMD_STOREQ (0x4<<24)
+#define PCL_CMD_STORED (0xb<<24)
+#define PCL_CMD_STORE0 (0x5<<24)
+#define PCL_CMD_STORE1 (0x6<<24)
+#define PCL_CMD_COMPARE (0xe<<24)
+#define PCL_CMD_SWAP_COMPARE (0xf<<24)
+#define PCL_CMD_ADD (0xd<<24)
+#define PCL_CMD_BRANCH (0x7<<24)
+
+/* BRANCH condition codes */
+#define PCL_COND_DMARDY_SET (0x1<<20)
+#define PCL_COND_DMARDY_CLEAR (0x2<<20)
+
+#define PCL_GEN_INTR (1<<19)
+#define PCL_LAST_BUFF (1<<18)
+#define PCL_LAST_CMD (PCL_LAST_BUFF)
+#define PCL_WAITSTAT (1<<17)
+#define PCL_BIGENDIAN (1<<16)
+#define PCL_ISOMODE (1<<12)
+
+#define DMA0_PREV_PCL 0x100
+#define DMA1_PREV_PCL 0x120
+#define DMA2_PREV_PCL 0x140
+#define DMA3_PREV_PCL 0x160
+#define DMA4_PREV_PCL 0x180
+#define DMA_PREV_PCL(chan) (DMA_BREG(DMA0_PREV_PCL, chan))
+
+#define DMA0_CURRENT_PCL 0x104
+#define DMA1_CURRENT_PCL 0x124
+#define DMA2_CURRENT_PCL 0x144
+#define DMA3_CURRENT_PCL 0x164
+#define DMA4_CURRENT_PCL 0x184
+#define DMA_CURRENT_PCL(chan) (DMA_BREG(DMA0_CURRENT_PCL, chan))
+
+#define DMA0_CHAN_STAT 0x10c
+#define DMA1_CHAN_STAT 0x12c
+#define DMA2_CHAN_STAT 0x14c
+#define DMA3_CHAN_STAT 0x16c
+#define DMA4_CHAN_STAT 0x18c
+#define DMA_CHAN_STAT(chan) (DMA_BREG(DMA0_CHAN_STAT, chan))
+/* CHAN_STATUS registers share bits */
+#define DMA_CHAN_STAT_SELFID (1<<31)
+#define DMA_CHAN_STAT_ISOPKT (1<<30)
+#define DMA_CHAN_STAT_PCIERR (1<<29)
+#define DMA_CHAN_STAT_PKTERR (1<<28)
+#define DMA_CHAN_STAT_PKTCMPL (1<<27)
+#define DMA_CHAN_STAT_SPECIALACK (1<<14)
+
+#define DMA0_CHAN_CTRL 0x110
+#define DMA1_CHAN_CTRL 0x130
+#define DMA2_CHAN_CTRL 0x150
+#define DMA3_CHAN_CTRL 0x170
+#define DMA4_CHAN_CTRL 0x190
+#define DMA_CHAN_CTRL(chan) (DMA_BREG(DMA0_CHAN_CTRL, chan))
+/* CHAN_CTRL registers share bits */
+#define DMA_CHAN_CTRL_ENABLE (1<<31)
+#define DMA_CHAN_CTRL_BUSY (1<<30)
+#define DMA_CHAN_CTRL_LINK (1<<29)
+
+#define DMA0_READY 0x114
+#define DMA1_READY 0x134
+#define DMA2_READY 0x154
+#define DMA3_READY 0x174
+#define DMA4_READY 0x194
+#define DMA_READY(chan) (DMA_BREG(DMA0_READY, chan))
+
+#define DMA_GLOBAL_REGISTER 0x908
+
+#define FIFO_SIZES 0xa00
+
+#define FIFO_CONTROL 0xa10
+#define FIFO_CONTROL_GRF_FLUSH (1<<4)
+#define FIFO_CONTROL_ITF_FLUSH (1<<3)
+#define FIFO_CONTROL_ATF_FLUSH (1<<2)
+
+#define FIFO_XMIT_THRESHOLD 0xa14
+
+#define DMA0_WORD0_CMP_VALUE 0xb00
+#define DMA1_WORD0_CMP_VALUE 0xb10
+#define DMA2_WORD0_CMP_VALUE 0xb20
+#define DMA3_WORD0_CMP_VALUE 0xb30
+#define DMA4_WORD0_CMP_VALUE 0xb40
+#define DMA_WORD0_CMP_VALUE(chan) (DMA_SREG(DMA0_WORD0_CMP_VALUE, chan))
+
+#define DMA0_WORD0_CMP_ENABLE 0xb04
+#define DMA1_WORD0_CMP_ENABLE 0xb14
+#define DMA2_WORD0_CMP_ENABLE 0xb24
+#define DMA3_WORD0_CMP_ENABLE 0xb34
+#define DMA4_WORD0_CMP_ENABLE 0xb44
+#define DMA_WORD0_CMP_ENABLE(chan) (DMA_SREG(DMA0_WORD0_CMP_ENABLE, chan))
+
+#define DMA0_WORD1_CMP_VALUE 0xb08
+#define DMA1_WORD1_CMP_VALUE 0xb18
+#define DMA2_WORD1_CMP_VALUE 0xb28
+#define DMA3_WORD1_CMP_VALUE 0xb38
+#define DMA4_WORD1_CMP_VALUE 0xb48
+#define DMA_WORD1_CMP_VALUE(chan) (DMA_SREG(DMA0_WORD1_CMP_VALUE, chan))
+
+#define DMA0_WORD1_CMP_ENABLE 0xb0c
+#define DMA1_WORD1_CMP_ENABLE 0xb1c
+#define DMA2_WORD1_CMP_ENABLE 0xb2c
+#define DMA3_WORD1_CMP_ENABLE 0xb3c
+#define DMA4_WORD1_CMP_ENABLE 0xb4c
+#define DMA_WORD1_CMP_ENABLE(chan) (DMA_SREG(DMA0_WORD1_CMP_ENABLE, chan))
+/* word 1 compare enable flags */
+#define DMA_WORD1_CMP_MATCH_OTHERBUS (1<<15)
+#define DMA_WORD1_CMP_MATCH_BROADCAST (1<<14)
+#define DMA_WORD1_CMP_MATCH_BUS_BCAST (1<<13)
+#define DMA_WORD1_CMP_MATCH_LOCAL_NODE (1<<12)
+#define DMA_WORD1_CMP_MATCH_EXACT (1<<11)
+#define DMA_WORD1_CMP_ENABLE_SELF_ID (1<<10)
+#define DMA_WORD1_CMP_ENABLE_MASTER (1<<8)
+
+#define LINK_ID 0xf00
+#define LINK_ID_BUS(id) (id<<22)
+#define LINK_ID_NODE(id) (id<<16)
+
+#define LINK_CONTROL 0xf04
+#define LINK_CONTROL_BUSY (1<<29)
+#define LINK_CONTROL_TX_ISO_EN (1<<26)
+#define LINK_CONTROL_RX_ISO_EN (1<<25)
+#define LINK_CONTROL_TX_ASYNC_EN (1<<24)
+#define LINK_CONTROL_RX_ASYNC_EN (1<<23)
+#define LINK_CONTROL_RESET_TX (1<<21)
+#define LINK_CONTROL_RESET_RX (1<<20)
+#define LINK_CONTROL_CYCMASTER (1<<11)
+#define LINK_CONTROL_CYCSOURCE (1<<10)
+#define LINK_CONTROL_CYCTIMEREN (1<<9)
+#define LINK_CONTROL_RCV_CMP_VALID (1<<7)
+#define LINK_CONTROL_SNOOP_ENABLE (1<<6)
+
+#define CYCLE_TIMER 0xf08
+
+#define LINK_PHY 0xf0c
+#define LINK_PHY_READ (1<<31)
+#define LINK_PHY_WRITE (1<<30)
+#define LINK_PHY_ADDR(addr) (addr<<24)
+#define LINK_PHY_WDATA(data) (data<<16)
+#define LINK_PHY_RADDR(addr) (addr<<8)
+
+#define LINK_INT_STATUS 0xf14
+#define LINK_INT_ENABLE 0xf18
+/* status and enable have identical bit numbers */
+#define LINK_INT_LINK_INT (1<<31)
+#define LINK_INT_PHY_TIME_OUT (1<<30)
+#define LINK_INT_PHY_REG_RCVD (1<<29)
+#define LINK_INT_PHY_BUSRESET (1<<28)
+#define LINK_INT_TX_RDY (1<<26)
+#define LINK_INT_RX_DATA_RDY (1<<25)
+#define LINK_INT_IT_STUCK (1<<20)
+#define LINK_INT_AT_STUCK (1<<19)
+#define LINK_INT_SNTRJ (1<<17)
+#define LINK_INT_HDR_ERR (1<<16)
+#define LINK_INT_TC_ERR (1<<15)
+#define LINK_INT_CYC_SEC (1<<11)
+#define LINK_INT_CYC_STRT (1<<10)
+#define LINK_INT_CYC_DONE (1<<9)
+#define LINK_INT_CYC_PEND (1<<8)
+#define LINK_INT_CYC_LOST (1<<7)
+#define LINK_INT_CYC_ARB_FAILED (1<<6)
+#define LINK_INT_GRF_OVER_FLOW (1<<5)
+#define LINK_INT_ITF_UNDER_FLOW (1<<4)
+#define LINK_INT_ATF_UNDER_FLOW (1<<3)
+#define LINK_INT_IARB_FAILED (1<<0)
Code Review / kvmfornfv.git / blobdiff