#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
+#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77843-private.h>
#include <linux/module.h>
#include <linux/platform_device.h>
struct max77843_muic_info {
struct device *dev;
- struct max77843 *max77843;
+ struct max77693_dev *max77843;
struct extcon_dev *edev;
struct mutex mutex;
MAX77843_MUIC_CHG_GND,
};
-enum {
- MAX77843_CABLE_USB = 0,
- MAX77843_CABLE_USB_HOST,
- MAX77843_CABLE_TA,
- MAX77843_CABLE_CHARGE_DOWNSTREAM,
- MAX77843_CABLE_FAST_CHARGER,
- MAX77843_CABLE_SLOW_CHARGER,
- MAX77843_CABLE_MHL,
- MAX77843_CABLE_MHL_TA,
- MAX77843_CABLE_JIG_USB_ON,
- MAX77843_CABLE_JIG_USB_OFF,
- MAX77843_CABLE_JIG_UART_ON,
- MAX77843_CABLE_JIG_UART_OFF,
-
- MAX77843_CABLE_NUM,
-};
-
-static const char *max77843_extcon_cable[] = {
- [MAX77843_CABLE_USB] = "USB",
- [MAX77843_CABLE_USB_HOST] = "USB-HOST",
- [MAX77843_CABLE_TA] = "TA",
- [MAX77843_CABLE_CHARGE_DOWNSTREAM] = "CHARGER-DOWNSTREAM",
- [MAX77843_CABLE_FAST_CHARGER] = "FAST-CHARGER",
- [MAX77843_CABLE_SLOW_CHARGER] = "SLOW-CHARGER",
- [MAX77843_CABLE_MHL] = "MHL",
- [MAX77843_CABLE_MHL_TA] = "MHL-TA",
- [MAX77843_CABLE_JIG_USB_ON] = "JIG-USB-ON",
- [MAX77843_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
- [MAX77843_CABLE_JIG_UART_ON] = "JIG-UART-ON",
- [MAX77843_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
+static const unsigned int max77843_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_CHG_USB_DCP,
+ EXTCON_CHG_USB_CDP,
+ EXTCON_CHG_USB_FAST,
+ EXTCON_CHG_USB_SLOW,
+ EXTCON_DISP_MHL,
+ EXTCON_JIG,
+ EXTCON_NONE,
};
struct max77843_muic_irq {
static int max77843_muic_set_path(struct max77843_muic_info *info,
u8 val, bool attached)
{
- struct max77843 *max77843 = info->max77843;
+ struct max77693_dev *max77843 = info->max77843;
int ret = 0;
unsigned int ctrl1, ctrl2;
if (attached)
ctrl1 = val;
else
- ctrl1 = CONTROL1_SW_OPEN;
+ ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN;
ret = regmap_update_bits(max77843->regmap_muic,
MAX77843_MUIC_REG_CONTROL1,
- CONTROL1_COM_SW, ctrl1);
+ MAX77843_MUIC_CONTROL1_COM_SW, ctrl1);
if (ret < 0) {
dev_err(info->dev, "Cannot switch MUIC port\n");
return ret;
adc = info->status[MAX77843_MUIC_STATUS1] &
MAX77843_MUIC_STATUS1_ADC_MASK;
- adc >>= STATUS1_ADC_SHIFT;
+ adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT;
switch (group) {
case MAX77843_CABLE_GROUP_ADC:
/* Get VBVolt register bit */
gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
MAX77843_MUIC_STATUS2_VBVOLT_MASK);
- gnd_type >>= STATUS2_VBVOLT_SHIFT;
+ gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT;
/* Offset of GND cable */
gnd_type |= MAX77843_MUIC_GND_USB_HOST;
switch (gnd_cable_type) {
case MAX77843_MUIC_GND_USB_HOST:
case MAX77843_MUIC_GND_USB_HOST_VB:
- ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_USB,
+ attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "USB-HOST", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX77843_MUIC_GND_MHL_VB:
case MAX77843_MUIC_GND_MHL:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "MHL", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
break;
default:
dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
int cable_type, bool attached)
{
int ret;
+ u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN;
dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
attached ? "attached" : "detached", cable_type);
switch (cable_type) {
case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
- ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
- if (ret < 0)
- return ret;
- extcon_set_cable_state(info->edev, "JIG-USB-OFF", attached);
- break;
case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
- ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
- if (ret < 0)
- return ret;
- extcon_set_cable_state(info->edev, "JIG-USB-ON", attached);
+ path = MAX77843_MUIC_CONTROL1_SW_USB;
break;
case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
- ret = max77843_muic_set_path(info, CONTROL1_SW_UART, attached);
- if (ret < 0)
- return ret;
- extcon_set_cable_state(info->edev, "JIG-UART-OFF", attached);
+ path = MAX77843_MUIC_CONTROL1_SW_UART;
break;
default:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
- if (ret < 0)
- return ret;
- break;
+ return -EINVAL;
}
+ ret = max77843_muic_set_path(info, path, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+
return 0;
}
switch (chg_type) {
case MAX77843_MUIC_CHG_USB:
- ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_USB,
+ attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "USB", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
break;
case MAX77843_MUIC_CHG_DOWNSTREAM:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev,
- "CHARGER-DOWNSTREAM", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+ attached);
break;
case MAX77843_MUIC_CHG_DEDICATED:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "TA", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_500MA:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "SLOW-CHAREGER", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+ attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_1A:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "FAST-CHARGER", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+ attached);
break;
case MAX77843_MUIC_CHG_GND:
gnd_type = max77843_muic_get_cable_type(info,
/* Charger cable on MHL accessory is attach or detach */
if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
- extcon_set_cable_state(info->edev, "MHL-TA", true);
+ extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ true);
else if (gnd_type == MAX77843_MUIC_GND_MHL)
- extcon_set_cable_state(info->edev, "MHL-TA", false);
+ extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ false);
break;
case MAX77843_MUIC_CHG_NONE:
break;
"failed to detect %s accessory (chg_type:0x%x)\n",
attached ? "attached" : "detached", chg_type);
- max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
return -EINVAL;
}
{
struct max77843_muic_info *info = container_of(work,
struct max77843_muic_info, irq_work);
- struct max77843 *max77843 = info->max77843;
+ struct max77693_dev *max77843 = info->max77843;
int ret = 0;
mutex_lock(&info->mutex);
{
struct max77843_muic_info *info = container_of(to_delayed_work(work),
struct max77843_muic_info, wq_detcable);
- struct max77843 *max77843 = info->max77843;
+ struct max77693_dev *max77843 = info->max77843;
int chg_type, adc, ret;
bool attached;
static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
enum max77843_muic_adc_debounce_time time)
{
- struct max77843 *max77843 = info->max77843;
+ struct max77693_dev *max77843 = info->max77843;
int ret;
switch (time) {
ret = regmap_update_bits(max77843->regmap_muic,
MAX77843_MUIC_REG_CONTROL4,
MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
- time << CONTROL4_ADCDBSET_SHIFT);
+ time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT);
if (ret < 0) {
dev_err(info->dev, "Cannot write MUIC regmap\n");
return ret;
return 0;
}
-static int max77843_init_muic_regmap(struct max77843 *max77843)
+static int max77843_init_muic_regmap(struct max77693_dev *max77843)
{
int ret;
static int max77843_muic_probe(struct platform_device *pdev)
{
- struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
struct max77843_muic_info *info;
unsigned int id;
int i, ret;
max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
/* Set initial path for UART */
- max77843_muic_set_path(info, CONTROL1_SW_UART, true);
+ max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true);
/* Check revision number of MUIC device */
ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
/* Support virtual irq domain for max77843 MUIC device */
INIT_WORK(&info->irq_work, max77843_muic_irq_work);
+ /* Clear IRQ bits before request IRQs */
+ ret = regmap_bulk_read(max77843->regmap_muic,
+ MAX77843_MUIC_REG_INT1, info->status,
+ MAX77843_MUIC_IRQ_NUM);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to Clear IRQ bits\n");
+ goto err_muic_irq;
+ }
+
for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) {
struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i];
unsigned int virq = 0;
static int max77843_muic_remove(struct platform_device *pdev)
{
struct max77843_muic_info *info = platform_get_drvdata(pdev);
- struct max77843 *max77843 = info->max77843;
+ struct max77693_dev *max77843 = info->max77843;
cancel_work_sync(&info->irq_work);
regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
Code Review / kvmfornfv.git / blobdiff