Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / devfreq / event / exynos-ppmu.h

diff --git a/kernel/drivers/devfreq/event/exynos-ppmu.h b/kernel/drivers/devfreq/event/exynos-ppmu.h
new file mode 100644 (file)
index 0000000..4e831d4
--- /dev/null
+++ b/kernel/drivers/devfreq/event/exynos-ppmu.h
@@ -0,0 +1,93 @@
+/*
+ * exynos_ppmu.h - EXYNOS PPMU header file
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Author : Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __EXYNOS_PPMU_H__
+#define __EXYNOS_PPMU_H__
+
+enum ppmu_state {
+       PPMU_DISABLE = 0,
+       PPMU_ENABLE,
+};
+
+enum ppmu_counter {
+       PPMU_PMNCNT0 = 0,
+       PPMU_PMNCNT1,
+       PPMU_PMNCNT2,
+       PPMU_PMNCNT3,
+
+       PPMU_PMNCNT_MAX,
+};
+
+enum ppmu_event_type {
+       PPMU_RO_BUSY_CYCLE_CNT  = 0x0,
+       PPMU_WO_BUSY_CYCLE_CNT  = 0x1,
+       PPMU_RW_BUSY_CYCLE_CNT  = 0x2,
+       PPMU_RO_REQUEST_CNT     = 0x3,
+       PPMU_WO_REQUEST_CNT     = 0x4,
+       PPMU_RO_DATA_CNT        = 0x5,
+       PPMU_WO_DATA_CNT        = 0x6,
+       PPMU_RO_LATENCY         = 0x12,
+       PPMU_WO_LATENCY         = 0x16,
+};
+
+enum ppmu_reg {
+       /* PPC control register */
+       PPMU_PMNC               = 0x00,
+       PPMU_CNTENS             = 0x10,
+       PPMU_CNTENC             = 0x20,
+       PPMU_INTENS             = 0x30,
+       PPMU_INTENC             = 0x40,
+       PPMU_FLAG               = 0x50,
+
+       /* Cycle Counter and Performance Event Counter Register */
+       PPMU_CCNT               = 0x100,
+       PPMU_PMCNT0             = 0x110,
+       PPMU_PMCNT1             = 0x120,
+       PPMU_PMCNT2             = 0x130,
+       PPMU_PMCNT3_HIGH        = 0x140,
+       PPMU_PMCNT3_LOW         = 0x150,
+
+       /* Bus Event Generator */
+       PPMU_BEVT0SEL           = 0x1000,
+       PPMU_BEVT1SEL           = 0x1100,
+       PPMU_BEVT2SEL           = 0x1200,
+       PPMU_BEVT3SEL           = 0x1300,
+       PPMU_COUNTER_RESET      = 0x1810,
+       PPMU_READ_OVERFLOW_CNT  = 0x1810,
+       PPMU_READ_UNDERFLOW_CNT = 0x1814,
+       PPMU_WRITE_OVERFLOW_CNT = 0x1850,
+       PPMU_WRITE_UNDERFLOW_CNT = 0x1854,
+       PPMU_READ_PENDING_CNT   = 0x1880,
+       PPMU_WRITE_PENDING_CNT  = 0x1884
+};
+
+/* PMNC register */
+#define PPMU_PMNC_CC_RESET_SHIFT       2
+#define PPMU_PMNC_COUNTER_RESET_SHIFT  1
+#define PPMU_PMNC_ENABLE_SHIFT         0
+#define PPMU_PMNC_START_MODE_MASK      BIT(16)
+#define PPMU_PMNC_CC_DIVIDER_MASK      BIT(3)
+#define PPMU_PMNC_CC_RESET_MASK                BIT(2)
+#define PPMU_PMNC_COUNTER_RESET_MASK   BIT(1)
+#define PPMU_PMNC_ENABLE_MASK          BIT(0)
+
+/* CNTENS/CNTENC/INTENS/INTENC/FLAG register */
+#define PPMU_CCNT_MASK                 BIT(31)
+#define PPMU_PMCNT3_MASK               BIT(3)
+#define PPMU_PMCNT2_MASK               BIT(2)
+#define PPMU_PMCNT1_MASK               BIT(1)
+#define PPMU_PMCNT0_MASK               BIT(0)
+
+/* PPMU_PMNCTx/PPMU_BETxSEL registers */
+#define PPMU_PMNCT(x)                  (PPMU_PMCNT0 + (0x10 * x))
+#define PPMU_BEVTxSEL(x)               (PPMU_BEVT0SEL + (0x100 * x))
+
+#endif /* __EXYNOS_PPMU_H__ */