These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / drivers / clocksource / i8253.c

diff --git a/kernel/drivers/clocksource/i8253.c b/kernel/drivers/clocksource/i8253.c
index 14ee3ef..0efd36e 100644 (file)
--- a/kernel/drivers/clocksource/i8253.c
+++ b/kernel/drivers/clocksource/i8253.c
@@ -100,44 +100,40 @@ int __init clocksource_i8253_init(void)
 #endif
 
 #ifdef CONFIG_CLKEVT_I8253
-/*
- * Initialize the PIT timer.
- *
- * This is also called after resume to bring the PIT into operation again.
- */
-static void init_pit_timer(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
+static int pit_shutdown(struct clock_event_device *evt)
 {
+       if (!clockevent_state_oneshot(evt) && !clockevent_state_periodic(evt))
+               return 0;
+
        raw_spin_lock(&i8253_lock);
 
-       switch (mode) {
-       case CLOCK_EVT_MODE_PERIODIC:
-               /* binary, mode 2, LSB/MSB, ch 0 */
-               outb_p(0x34, PIT_MODE);
-               outb_p(PIT_LATCH & 0xff , PIT_CH0);     /* LSB */
-               outb_p(PIT_LATCH >> 8 , PIT_CH0);               /* MSB */
-               break;
-
-       case CLOCK_EVT_MODE_SHUTDOWN:
-       case CLOCK_EVT_MODE_UNUSED:
-               if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
-                   evt->mode == CLOCK_EVT_MODE_ONESHOT) {
-                       outb_p(0x30, PIT_MODE);
-                       outb_p(0, PIT_CH0);
-                       outb_p(0, PIT_CH0);
-               }
-               break;
-
-       case CLOCK_EVT_MODE_ONESHOT:
-               /* One shot setup */
-               outb_p(0x38, PIT_MODE);
-               break;
-
-       case CLOCK_EVT_MODE_RESUME:
-               /* Nothing to do here */
-               break;
-       }
+       outb_p(0x30, PIT_MODE);
+       outb_p(0, PIT_CH0);
+       outb_p(0, PIT_CH0);
+
+       raw_spin_unlock(&i8253_lock);
+       return 0;
+}
+
+static int pit_set_oneshot(struct clock_event_device *evt)
+{
+       raw_spin_lock(&i8253_lock);
+       outb_p(0x38, PIT_MODE);
+       raw_spin_unlock(&i8253_lock);
+       return 0;
+}
+
+static int pit_set_periodic(struct clock_event_device *evt)
+{
+       raw_spin_lock(&i8253_lock);
+
+       /* binary, mode 2, LSB/MSB, ch 0 */
+       outb_p(0x34, PIT_MODE);
+       outb_p(PIT_LATCH & 0xff, PIT_CH0);      /* LSB */
+       outb_p(PIT_LATCH >> 8, PIT_CH0);        /* MSB */
+
        raw_spin_unlock(&i8253_lock);
+       return 0;
 }
 
 /*
@@ -160,10 +156,11 @@ static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
  * it can be solely used for the global tick.
  */
 struct clock_event_device i8253_clockevent = {
-       .name           = "pit",
-       .features       = CLOCK_EVT_FEAT_PERIODIC,
-       .set_mode       = init_pit_timer,
-       .set_next_event = pit_next_event,
+       .name                   = "pit",
+       .features               = CLOCK_EVT_FEAT_PERIODIC,
+       .set_state_shutdown     = pit_shutdown,
+       .set_state_periodic     = pit_set_periodic,
+       .set_next_event         = pit_next_event,
 };
 
 /*
@@ -172,8 +169,10 @@ struct clock_event_device i8253_clockevent = {
  */
 void __init clockevent_i8253_init(bool oneshot)
 {
-       if (oneshot)
+       if (oneshot) {
                i8253_clockevent.features |= CLOCK_EVT_FEAT_ONESHOT;
+               i8253_clockevent.set_state_oneshot = pit_set_oneshot;
+       }
        /*
         * Start pit with the boot cpu mask. x86 might make it global
         * when it is used as broadcast device later.