--- /dev/null
+/*
+ * OMAP DPLL clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+#include "clock.h"
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+ defined(CONFIG_SOC_DRA7XX)
+static const struct clk_ops dpll_m4xen_ck_ops = {
+ .enable = &omap3_noncore_dpll_enable,
+ .disable = &omap3_noncore_dpll_disable,
+ .recalc_rate = &omap4_dpll_regm4xen_recalc,
+ .round_rate = &omap4_dpll_regm4xen_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+ .set_parent = &omap3_noncore_dpll_set_parent,
+ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent,
+ .determine_rate = &omap4_dpll_regm4xen_determine_rate,
+ .get_parent = &omap2_init_dpll_parent,
+};
+#else
+static const struct clk_ops dpll_m4xen_ck_ops = {};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) || \
+ defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) || \
+ defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
+static const struct clk_ops dpll_core_ck_ops = {
+ .recalc_rate = &omap3_dpll_recalc,
+ .get_parent = &omap2_init_dpll_parent,
+};
+
+static const struct clk_ops dpll_ck_ops = {
+ .enable = &omap3_noncore_dpll_enable,
+ .disable = &omap3_noncore_dpll_disable,
+ .recalc_rate = &omap3_dpll_recalc,
+ .round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+ .set_parent = &omap3_noncore_dpll_set_parent,
+ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent,
+ .determine_rate = &omap3_noncore_dpll_determine_rate,
+ .get_parent = &omap2_init_dpll_parent,
+};
+
+static const struct clk_ops dpll_no_gate_ck_ops = {
+ .recalc_rate = &omap3_dpll_recalc,
+ .get_parent = &omap2_init_dpll_parent,
+ .round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+ .set_parent = &omap3_noncore_dpll_set_parent,
+ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent,
+ .determine_rate = &omap3_noncore_dpll_determine_rate,
+};
+#else
+static const struct clk_ops dpll_core_ck_ops = {};
+static const struct clk_ops dpll_ck_ops = {};
+static const struct clk_ops dpll_no_gate_ck_ops = {};
+const struct clk_hw_omap_ops clkhwops_omap3_dpll = {};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2
+static const struct clk_ops omap2_dpll_core_ck_ops = {
+ .get_parent = &omap2_init_dpll_parent,
+ .recalc_rate = &omap2_dpllcore_recalc,
+ .round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap2_reprogram_dpllcore,
+};
+#else
+static const struct clk_ops omap2_dpll_core_ck_ops = {};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static const struct clk_ops omap3_dpll_core_ck_ops = {
+ .get_parent = &omap2_init_dpll_parent,
+ .recalc_rate = &omap3_dpll_recalc,
+ .round_rate = &omap2_dpll_round_rate,
+};
+#else
+static const struct clk_ops omap3_dpll_core_ck_ops = {};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static const struct clk_ops omap3_dpll_ck_ops = {
+ .enable = &omap3_noncore_dpll_enable,
+ .disable = &omap3_noncore_dpll_disable,
+ .get_parent = &omap2_init_dpll_parent,
+ .recalc_rate = &omap3_dpll_recalc,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+ .set_parent = &omap3_noncore_dpll_set_parent,
+ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent,
+ .determine_rate = &omap3_noncore_dpll_determine_rate,
+ .round_rate = &omap2_dpll_round_rate,
+};
+
+static const struct clk_ops omap3_dpll_per_ck_ops = {
+ .enable = &omap3_noncore_dpll_enable,
+ .disable = &omap3_noncore_dpll_disable,
+ .get_parent = &omap2_init_dpll_parent,
+ .recalc_rate = &omap3_dpll_recalc,
+ .set_rate = &omap3_dpll4_set_rate,
+ .set_parent = &omap3_noncore_dpll_set_parent,
+ .set_rate_and_parent = &omap3_dpll4_set_rate_and_parent,
+ .determine_rate = &omap3_noncore_dpll_determine_rate,
+ .round_rate = &omap2_dpll_round_rate,
+};
+#endif
+
+static const struct clk_ops dpll_x2_ck_ops = {
+ .recalc_rate = &omap3_clkoutx2_recalc,
+};
+
+/**
+ * _register_dpll - low level registration of a DPLL clock
+ * @hw: hardware clock definition for the clock
+ * @node: device node for the clock
+ *
+ * Finalizes DPLL registration process. In case a failure (clk-ref or
+ * clk-bypass is missing), the clock is added to retry list and
+ * the initialization is retried on later stage.
+ */
+static void __init _register_dpll(struct clk_hw *hw,
+ struct device_node *node)
+{
+ struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw);
+ struct dpll_data *dd = clk_hw->dpll_data;
+ struct clk *clk;
+
+ dd->clk_ref = of_clk_get(node, 0);
+ dd->clk_bypass = of_clk_get(node, 1);
+
+ if (IS_ERR(dd->clk_ref) || IS_ERR(dd->clk_bypass)) {
+ pr_debug("clk-ref or clk-bypass missing for %s, retry later\n",
+ node->name);
+ if (!ti_clk_retry_init(node, hw, _register_dpll))
+ return;
+
+ goto cleanup;
+ }
+
+ /* register the clock */
+ clk = clk_register(NULL, &clk_hw->hw);
+
+ if (!IS_ERR(clk)) {
+ omap2_init_clk_hw_omap_clocks(clk);
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ kfree(clk_hw->hw.init->parent_names);
+ kfree(clk_hw->hw.init);
+ return;
+ }
+
+cleanup:
+ kfree(clk_hw->dpll_data);
+ kfree(clk_hw->hw.init->parent_names);
+ kfree(clk_hw->hw.init);
+ kfree(clk_hw);
+}
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_ATAGS)
+void __iomem *_get_reg(u8 module, u16 offset)
+{
+ u32 reg;
+ struct clk_omap_reg *reg_setup;
+
+ reg_setup = (struct clk_omap_reg *)®
+
+ reg_setup->index = module;
+ reg_setup->offset = offset;
+
+ return (void __iomem *)reg;
+}
+
+struct clk *ti_clk_register_dpll(struct ti_clk *setup)
+{
+ struct clk_hw_omap *clk_hw;
+ struct clk_init_data init = { NULL };
+ struct dpll_data *dd;
+ struct clk *clk;
+ struct ti_clk_dpll *dpll;
+ const struct clk_ops *ops = &omap3_dpll_ck_ops;
+ struct clk *clk_ref;
+ struct clk *clk_bypass;
+
+ dpll = setup->data;
+
+ if (dpll->num_parents < 2)
+ return ERR_PTR(-EINVAL);
+
+ clk_ref = clk_get_sys(NULL, dpll->parents[0]);
+ clk_bypass = clk_get_sys(NULL, dpll->parents[1]);
+
+ if (IS_ERR_OR_NULL(clk_ref) || IS_ERR_OR_NULL(clk_bypass))
+ return ERR_PTR(-EAGAIN);
+
+ dd = kzalloc(sizeof(*dd), GFP_KERNEL);
+ clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+ if (!dd || !clk_hw) {
+ clk = ERR_PTR(-ENOMEM);
+ goto cleanup;
+ }
+
+ clk_hw->dpll_data = dd;
+ clk_hw->ops = &clkhwops_omap3_dpll;
+ clk_hw->hw.init = &init;
+ clk_hw->flags = MEMMAP_ADDRESSING;
+
+ init.name = setup->name;
+ init.ops = ops;
+
+ init.num_parents = dpll->num_parents;
+ init.parent_names = dpll->parents;
+
+ dd->control_reg = _get_reg(dpll->module, dpll->control_reg);
+ dd->idlest_reg = _get_reg(dpll->module, dpll->idlest_reg);
+ dd->mult_div1_reg = _get_reg(dpll->module, dpll->mult_div1_reg);
+ dd->autoidle_reg = _get_reg(dpll->module, dpll->autoidle_reg);
+
+ dd->modes = dpll->modes;
+ dd->div1_mask = dpll->div1_mask;
+ dd->idlest_mask = dpll->idlest_mask;
+ dd->mult_mask = dpll->mult_mask;
+ dd->autoidle_mask = dpll->autoidle_mask;
+ dd->enable_mask = dpll->enable_mask;
+ dd->sddiv_mask = dpll->sddiv_mask;
+ dd->dco_mask = dpll->dco_mask;
+ dd->max_divider = dpll->max_divider;
+ dd->min_divider = dpll->min_divider;
+ dd->max_multiplier = dpll->max_multiplier;
+ dd->auto_recal_bit = dpll->auto_recal_bit;
+ dd->recal_en_bit = dpll->recal_en_bit;
+ dd->recal_st_bit = dpll->recal_st_bit;
+
+ dd->clk_ref = clk_ref;
+ dd->clk_bypass = clk_bypass;
+
+ if (dpll->flags & CLKF_CORE)
+ ops = &omap3_dpll_core_ck_ops;
+
+ if (dpll->flags & CLKF_PER)
+ ops = &omap3_dpll_per_ck_ops;
+
+ if (dpll->flags & CLKF_J_TYPE)
+ dd->flags |= DPLL_J_TYPE;
+
+ clk = clk_register(NULL, &clk_hw->hw);
+
+ if (!IS_ERR(clk))
+ return clk;
+
+cleanup:
+ kfree(dd);
+ kfree(clk_hw);
+ return clk;
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+ defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) || \
+ defined(CONFIG_SOC_AM43XX)
+/**
+ * _register_dpll_x2 - Registers a DPLLx2 clock
+ * @node: device node for this clock
+ * @ops: clk_ops for this clock
+ * @hw_ops: clk_hw_ops for this clock
+ *
+ * Initializes a DPLL x 2 clock from device tree data.
+ */
+static void _register_dpll_x2(struct device_node *node,
+ const struct clk_ops *ops,
+ const struct clk_hw_omap_ops *hw_ops)
+{
+ struct clk *clk;
+ struct clk_init_data init = { NULL };
+ struct clk_hw_omap *clk_hw;
+ const char *name = node->name;
+ const char *parent_name;
+
+ parent_name = of_clk_get_parent_name(node, 0);
+ if (!parent_name) {
+ pr_err("%s must have parent\n", node->name);
+ return;
+ }
+
+ clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+ if (!clk_hw)
+ return;
+
+ clk_hw->ops = hw_ops;
+ clk_hw->hw.init = &init;
+
+ init.name = name;
+ init.ops = ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ /* register the clock */
+ clk = clk_register(NULL, &clk_hw->hw);
+
+ if (IS_ERR(clk)) {
+ kfree(clk_hw);
+ } else {
+ omap2_init_clk_hw_omap_clocks(clk);
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ }
+}
+#endif
+
+/**
+ * of_ti_dpll_setup - Setup function for OMAP DPLL clocks
+ * @node: device node containing the DPLL info
+ * @ops: ops for the DPLL
+ * @ddt: DPLL data template to use
+ *
+ * Initializes a DPLL clock from device tree data.
+ */
+static void __init of_ti_dpll_setup(struct device_node *node,
+ const struct clk_ops *ops,
+ const struct dpll_data *ddt)
+{
+ struct clk_hw_omap *clk_hw = NULL;
+ struct clk_init_data *init = NULL;
+ const char **parent_names = NULL;
+ struct dpll_data *dd = NULL;
+ int i;
+ u8 dpll_mode = 0;
+
+ dd = kzalloc(sizeof(*dd), GFP_KERNEL);
+ clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+ init = kzalloc(sizeof(*init), GFP_KERNEL);
+ if (!dd || !clk_hw || !init)
+ goto cleanup;
+
+ memcpy(dd, ddt, sizeof(*dd));
+
+ clk_hw->dpll_data = dd;
+ clk_hw->ops = &clkhwops_omap3_dpll;
+ clk_hw->hw.init = init;
+ clk_hw->flags = MEMMAP_ADDRESSING;
+
+ init->name = node->name;
+ init->ops = ops;
+
+ init->num_parents = of_clk_get_parent_count(node);
+ if (init->num_parents < 1) {
+ pr_err("%s must have parent(s)\n", node->name);
+ goto cleanup;
+ }
+
+ parent_names = kzalloc(sizeof(char *) * init->num_parents, GFP_KERNEL);
+ if (!parent_names)
+ goto cleanup;
+
+ for (i = 0; i < init->num_parents; i++)
+ parent_names[i] = of_clk_get_parent_name(node, i);
+
+ init->parent_names = parent_names;
+
+ dd->control_reg = ti_clk_get_reg_addr(node, 0);
+
+ /*
+ * Special case for OMAP2 DPLL, register order is different due to
+ * missing idlest_reg, also clkhwops is different. Detected from
+ * missing idlest_mask.
+ */
+ if (!dd->idlest_mask) {
+ dd->mult_div1_reg = ti_clk_get_reg_addr(node, 1);
+#ifdef CONFIG_ARCH_OMAP2
+ clk_hw->ops = &clkhwops_omap2xxx_dpll;
+ omap2xxx_clkt_dpllcore_init(&clk_hw->hw);
+#endif
+ } else {
+ dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
+ if (IS_ERR(dd->idlest_reg))
+ goto cleanup;
+
+ dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
+ }
+
+ if (IS_ERR(dd->control_reg) || IS_ERR(dd->mult_div1_reg))
+ goto cleanup;
+
+ if (dd->autoidle_mask) {
+ dd->autoidle_reg = ti_clk_get_reg_addr(node, 3);
+ if (IS_ERR(dd->autoidle_reg))
+ goto cleanup;
+ }
+
+ if (of_property_read_bool(node, "ti,low-power-stop"))
+ dpll_mode |= 1 << DPLL_LOW_POWER_STOP;
+
+ if (of_property_read_bool(node, "ti,low-power-bypass"))
+ dpll_mode |= 1 << DPLL_LOW_POWER_BYPASS;
+
+ if (of_property_read_bool(node, "ti,lock"))
+ dpll_mode |= 1 << DPLL_LOCKED;
+
+ if (dpll_mode)
+ dd->modes = dpll_mode;
+
+ _register_dpll(&clk_hw->hw, node);
+ return;
+
+cleanup:
+ kfree(dd);
+ kfree(parent_names);
+ kfree(init);
+ kfree(clk_hw);
+}
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+ defined(CONFIG_SOC_DRA7XX)
+static void __init of_ti_omap4_dpll_x2_setup(struct device_node *node)
+{
+ _register_dpll_x2(node, &dpll_x2_ck_ops, &clkhwops_omap4_dpllmx);
+}
+CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock",
+ of_ti_omap4_dpll_x2_setup);
+#endif
+
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
+static void __init of_ti_am3_dpll_x2_setup(struct device_node *node)
+{
+ _register_dpll_x2(node, &dpll_x2_ck_ops, NULL);
+}
+CLK_OF_DECLARE(ti_am3_dpll_x2_clock, "ti,am3-dpll-x2-clock",
+ of_ti_am3_dpll_x2_setup);
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static void __init of_ti_omap3_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1,
+ .enable_mask = 0x7,
+ .autoidle_mask = 0x7,
+ .mult_mask = 0x7ff << 8,
+ .div1_mask = 0x7f,
+ .max_multiplier = 2047,
+ .max_divider = 128,
+ .min_divider = 1,
+ .freqsel_mask = 0xf0,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock",
+ of_ti_omap3_dpll_setup);
+
+static void __init of_ti_omap3_core_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1,
+ .enable_mask = 0x7,
+ .autoidle_mask = 0x7,
+ .mult_mask = 0x7ff << 16,
+ .div1_mask = 0x7f << 8,
+ .max_multiplier = 2047,
+ .max_divider = 128,
+ .min_divider = 1,
+ .freqsel_mask = 0xf0,
+ };
+
+ of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock",
+ of_ti_omap3_core_dpll_setup);
+
+static void __init of_ti_omap3_per_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1 << 1,
+ .enable_mask = 0x7 << 16,
+ .autoidle_mask = 0x7 << 3,
+ .mult_mask = 0x7ff << 8,
+ .div1_mask = 0x7f,
+ .max_multiplier = 2047,
+ .max_divider = 128,
+ .min_divider = 1,
+ .freqsel_mask = 0xf00000,
+ .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock",
+ of_ti_omap3_per_dpll_setup);
+
+static void __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1 << 1,
+ .enable_mask = 0x7 << 16,
+ .autoidle_mask = 0x7 << 3,
+ .mult_mask = 0xfff << 8,
+ .div1_mask = 0x7f,
+ .max_multiplier = 4095,
+ .max_divider = 128,
+ .min_divider = 1,
+ .sddiv_mask = 0xff << 24,
+ .dco_mask = 0xe << 20,
+ .flags = DPLL_J_TYPE,
+ .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock",
+ of_ti_omap3_per_jtype_dpll_setup);
+#endif
+
+static void __init of_ti_omap4_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1,
+ .enable_mask = 0x7,
+ .autoidle_mask = 0x7,
+ .mult_mask = 0x7ff << 8,
+ .div1_mask = 0x7f,
+ .max_multiplier = 2047,
+ .max_divider = 128,
+ .min_divider = 1,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock",
+ of_ti_omap4_dpll_setup);
+
+static void __init of_ti_omap5_mpu_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1,
+ .enable_mask = 0x7,
+ .autoidle_mask = 0x7,
+ .mult_mask = 0x7ff << 8,
+ .div1_mask = 0x7f,
+ .max_multiplier = 2047,
+ .max_divider = 128,
+ .dcc_mask = BIT(22),
+ .dcc_rate = 1400000000, /* DCC beyond 1.4GHz */
+ .min_divider = 1,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
+}
+CLK_OF_DECLARE(of_ti_omap5_mpu_dpll_clock, "ti,omap5-mpu-dpll-clock",
+ of_ti_omap5_mpu_dpll_setup);
+
+static void __init of_ti_omap4_core_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1,
+ .enable_mask = 0x7,
+ .autoidle_mask = 0x7,
+ .mult_mask = 0x7ff << 8,
+ .div1_mask = 0x7f,
+ .max_multiplier = 2047,
+ .max_divider = 128,
+ .min_divider = 1,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock",
+ of_ti_omap4_core_dpll_setup);
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+ defined(CONFIG_SOC_DRA7XX)
+static void __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1,
+ .enable_mask = 0x7,
+ .autoidle_mask = 0x7,
+ .mult_mask = 0x7ff << 8,
+ .div1_mask = 0x7f,
+ .max_multiplier = 2047,
+ .max_divider = 128,
+ .min_divider = 1,
+ .m4xen_mask = 0x800,
+ .lpmode_mask = 1 << 10,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock",
+ of_ti_omap4_m4xen_dpll_setup);
+
+static void __init of_ti_omap4_jtype_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1,
+ .enable_mask = 0x7,
+ .autoidle_mask = 0x7,
+ .mult_mask = 0xfff << 8,
+ .div1_mask = 0xff,
+ .max_multiplier = 4095,
+ .max_divider = 256,
+ .min_divider = 1,
+ .sddiv_mask = 0xff << 24,
+ .flags = DPLL_J_TYPE,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock",
+ of_ti_omap4_jtype_dpll_setup);
+#endif
+
+static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1,
+ .enable_mask = 0x7,
+ .mult_mask = 0x7ff << 8,
+ .div1_mask = 0x7f,
+ .max_multiplier = 2047,
+ .max_divider = 128,
+ .min_divider = 1,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock",
+ of_ti_am3_no_gate_dpll_setup);
+
+static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1,
+ .enable_mask = 0x7,
+ .mult_mask = 0x7ff << 8,
+ .div1_mask = 0x7f,
+ .max_multiplier = 4095,
+ .max_divider = 256,
+ .min_divider = 2,
+ .flags = DPLL_J_TYPE,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock",
+ of_ti_am3_jtype_dpll_setup);
+
+static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1,
+ .enable_mask = 0x7,
+ .mult_mask = 0x7ff << 8,
+ .div1_mask = 0x7f,
+ .max_multiplier = 2047,
+ .max_divider = 128,
+ .min_divider = 1,
+ .flags = DPLL_J_TYPE,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock,
+ "ti,am3-dpll-no-gate-j-type-clock",
+ of_ti_am3_no_gate_jtype_dpll_setup);
+
+static void __init of_ti_am3_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1,
+ .enable_mask = 0x7,
+ .mult_mask = 0x7ff << 8,
+ .div1_mask = 0x7f,
+ .max_multiplier = 2047,
+ .max_divider = 128,
+ .min_divider = 1,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup);
+
+static void __init of_ti_am3_core_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .idlest_mask = 0x1,
+ .enable_mask = 0x7,
+ .mult_mask = 0x7ff << 8,
+ .div1_mask = 0x7f,
+ .max_multiplier = 2047,
+ .max_divider = 128,
+ .min_divider = 1,
+ .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+ };
+
+ of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock",
+ of_ti_am3_core_dpll_setup);
+
+static void __init of_ti_omap2_core_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .enable_mask = 0x3,
+ .mult_mask = 0x3ff << 12,
+ .div1_mask = 0xf << 8,
+ .max_divider = 16,
+ .min_divider = 1,
+ };
+
+ of_ti_dpll_setup(node, &omap2_dpll_core_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_omap2_core_dpll_clock, "ti,omap2-dpll-core-clock",
+ of_ti_omap2_core_dpll_setup);
Code Review / kvmfornfv.git / blobdiff