Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / char / dtlk.c
diff --git a/kernel/drivers/char/dtlk.c b/kernel/drivers/char/dtlk.c
new file mode 100644 (file)
index 0000000..65a8d96
--- /dev/null
@@ -0,0 +1,663 @@
+/*                                              -*- linux-c -*-
+ * dtlk.c - DoubleTalk PC driver for Linux
+ *
+ * Original author: Chris Pallotta <chris@allmedia.com>
+ * Current maintainer: Jim Van Zandt <jrv@vanzandt.mv.com>
+ * 
+ * 2000-03-18 Jim Van Zandt: Fix polling.
+ *  Eliminate dtlk_timer_active flag and separate dtlk_stop_timer
+ *  function.  Don't restart timer in dtlk_timer_tick.  Restart timer
+ *  in dtlk_poll after every poll.  dtlk_poll returns mask (duh).
+ *  Eliminate unused function dtlk_write_byte.  Misc. code cleanups.
+ */
+
+/* This driver is for the DoubleTalk PC, a speech synthesizer
+   manufactured by RC Systems (http://www.rcsys.com/).  It was written
+   based on documentation in their User's Manual file and Developer's
+   Tools disk.
+
+   The DoubleTalk PC contains four voice synthesizers: text-to-speech
+   (TTS), linear predictive coding (LPC), PCM/ADPCM, and CVSD.  It
+   also has a tone generator.  Output data for LPC are written to the
+   LPC port, and output data for the other modes are written to the
+   TTS port.
+
+   Two kinds of data can be read from the DoubleTalk: status
+   information (in response to the "\001?" interrogation command) is
+   read from the TTS port, and index markers (which mark the progress
+   of the speech) are read from the LPC port.  Not all models of the
+   DoubleTalk PC implement index markers.  Both the TTS and LPC ports
+   can also display status flags.
+
+   The DoubleTalk PC generates no interrupts.
+
+   These characteristics are mapped into the Unix stream I/O model as
+   follows:
+
+   "write" sends bytes to the TTS port.  It is the responsibility of
+   the user program to switch modes among TTS, PCM/ADPCM, and CVSD.
+   This driver was written for use with the text-to-speech
+   synthesizer.  If LPC output is needed some day, other minor device
+   numbers can be used to select among output modes.
+
+   "read" gets index markers from the LPC port.  If the device does
+   not implement index markers, the read will fail with error EINVAL.
+
+   Status information is available using the DTLK_INTERROGATE ioctl.
+
+ */
+
+#include <linux/module.h>
+
+#define KERNEL
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/errno.h>       /* for -EBUSY */
+#include <linux/ioport.h>      /* for request_region */
+#include <linux/delay.h>       /* for loops_per_jiffy */
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#include <asm/io.h>            /* for inb_p, outb_p, inb, outb, etc. */
+#include <asm/uaccess.h>       /* for get_user, etc. */
+#include <linux/wait.h>                /* for wait_queue */
+#include <linux/init.h>                /* for __init, module_{init,exit} */
+#include <linux/poll.h>                /* for POLLIN, etc. */
+#include <linux/dtlk.h>                /* local header file for DoubleTalk values */
+
+#ifdef TRACING
+#define TRACE_TEXT(str) printk(str);
+#define TRACE_RET printk(")")
+#else                          /* !TRACING */
+#define TRACE_TEXT(str) ((void) 0)
+#define TRACE_RET ((void) 0)
+#endif                         /* TRACING */
+
+static DEFINE_MUTEX(dtlk_mutex);
+static void dtlk_timer_tick(unsigned long data);
+
+static int dtlk_major;
+static int dtlk_port_lpc;
+static int dtlk_port_tts;
+static int dtlk_busy;
+static int dtlk_has_indexing;
+static unsigned int dtlk_portlist[] =
+{0x25e, 0x29e, 0x2de, 0x31e, 0x35e, 0x39e, 0};
+static wait_queue_head_t dtlk_process_list;
+static DEFINE_TIMER(dtlk_timer, dtlk_timer_tick, 0, 0);
+
+/* prototypes for file_operations struct */
+static ssize_t dtlk_read(struct file *, char __user *,
+                        size_t nbytes, loff_t * ppos);
+static ssize_t dtlk_write(struct file *, const char __user *,
+                         size_t nbytes, loff_t * ppos);
+static unsigned int dtlk_poll(struct file *, poll_table *);
+static int dtlk_open(struct inode *, struct file *);
+static int dtlk_release(struct inode *, struct file *);
+static long dtlk_ioctl(struct file *file,
+                      unsigned int cmd, unsigned long arg);
+
+static const struct file_operations dtlk_fops =
+{
+       .owner          = THIS_MODULE,
+       .read           = dtlk_read,
+       .write          = dtlk_write,
+       .poll           = dtlk_poll,
+       .unlocked_ioctl = dtlk_ioctl,
+       .open           = dtlk_open,
+       .release        = dtlk_release,
+       .llseek         = no_llseek,
+};
+
+/* local prototypes */
+static int dtlk_dev_probe(void);
+static struct dtlk_settings *dtlk_interrogate(void);
+static int dtlk_readable(void);
+static char dtlk_read_lpc(void);
+static char dtlk_read_tts(void);
+static int dtlk_writeable(void);
+static char dtlk_write_bytes(const char *buf, int n);
+static char dtlk_write_tts(char);
+/*
+   static void dtlk_handle_error(char, char, unsigned int);
+ */
+
+static ssize_t dtlk_read(struct file *file, char __user *buf,
+                        size_t count, loff_t * ppos)
+{
+       unsigned int minor = iminor(file_inode(file));
+       char ch;
+       int i = 0, retries;
+
+       TRACE_TEXT("(dtlk_read");
+       /*  printk("DoubleTalk PC - dtlk_read()\n"); */
+
+       if (minor != DTLK_MINOR || !dtlk_has_indexing)
+               return -EINVAL;
+
+       for (retries = 0; retries < loops_per_jiffy; retries++) {
+               while (i < count && dtlk_readable()) {
+                       ch = dtlk_read_lpc();
+                       /*        printk("dtlk_read() reads 0x%02x\n", ch); */
+                       if (put_user(ch, buf++))
+                               return -EFAULT;
+                       i++;
+               }
+               if (i)
+                       return i;
+               if (file->f_flags & O_NONBLOCK)
+                       break;
+               msleep_interruptible(100);
+       }
+       if (retries == loops_per_jiffy)
+               printk(KERN_ERR "dtlk_read times out\n");
+       TRACE_RET;
+       return -EAGAIN;
+}
+
+static ssize_t dtlk_write(struct file *file, const char __user *buf,
+                         size_t count, loff_t * ppos)
+{
+       int i = 0, retries = 0, ch;
+
+       TRACE_TEXT("(dtlk_write");
+#ifdef TRACING
+       printk(" \"");
+       {
+               int i, ch;
+               for (i = 0; i < count; i++) {
+                       if (get_user(ch, buf + i))
+                               return -EFAULT;
+                       if (' ' <= ch && ch <= '~')
+                               printk("%c", ch);
+                       else
+                               printk("\\%03o", ch);
+               }
+               printk("\"");
+       }
+#endif
+
+       if (iminor(file_inode(file)) != DTLK_MINOR)
+               return -EINVAL;
+
+       while (1) {
+               while (i < count && !get_user(ch, buf) &&
+                      (ch == DTLK_CLEAR || dtlk_writeable())) {
+                       dtlk_write_tts(ch);
+                       buf++;
+                       i++;
+                       if (i % 5 == 0)
+                               /* We yield our time until scheduled
+                                  again.  This reduces the transfer
+                                  rate to 500 bytes/sec, but that's
+                                  still enough to keep up with the
+                                  speech synthesizer. */
+                               msleep_interruptible(1);
+                       else {
+                               /* the RDY bit goes zero 2-3 usec
+                                  after writing, and goes 1 again
+                                  180-190 usec later.  Here, we wait
+                                  up to 250 usec for the RDY bit to
+                                  go nonzero. */
+                               for (retries = 0;
+                                    retries < loops_per_jiffy / (4000/HZ);
+                                    retries++)
+                                       if (inb_p(dtlk_port_tts) &
+                                           TTS_WRITABLE)
+                                               break;
+                       }
+                       retries = 0;
+               }
+               if (i == count)
+                       return i;
+               if (file->f_flags & O_NONBLOCK)
+                       break;
+
+               msleep_interruptible(1);
+
+               if (++retries > 10 * HZ) { /* wait no more than 10 sec
+                                             from last write */
+                       printk("dtlk: write timeout.  "
+                              "inb_p(dtlk_port_tts) = 0x%02x\n",
+                              inb_p(dtlk_port_tts));
+                       TRACE_RET;
+                       return -EBUSY;
+               }
+       }
+       TRACE_RET;
+       return -EAGAIN;
+}
+
+static unsigned int dtlk_poll(struct file *file, poll_table * wait)
+{
+       int mask = 0;
+       unsigned long expires;
+
+       TRACE_TEXT(" dtlk_poll");
+       /*
+          static long int j;
+          printk(".");
+          printk("<%ld>", jiffies-j);
+          j=jiffies;
+        */
+       poll_wait(file, &dtlk_process_list, wait);
+
+       if (dtlk_has_indexing && dtlk_readable()) {
+               del_timer(&dtlk_timer);
+               mask = POLLIN | POLLRDNORM;
+       }
+       if (dtlk_writeable()) {
+               del_timer(&dtlk_timer);
+               mask |= POLLOUT | POLLWRNORM;
+       }
+       /* there are no exception conditions */
+
+       /* There won't be any interrupts, so we set a timer instead. */
+       expires = jiffies + 3*HZ / 100;
+       mod_timer(&dtlk_timer, expires);
+
+       return mask;
+}
+
+static void dtlk_timer_tick(unsigned long data)
+{
+       TRACE_TEXT(" dtlk_timer_tick");
+       wake_up_interruptible(&dtlk_process_list);
+}
+
+static long dtlk_ioctl(struct file *file,
+                      unsigned int cmd,
+                      unsigned long arg)
+{
+       char __user *argp = (char __user *)arg;
+       struct dtlk_settings *sp;
+       char portval;
+       TRACE_TEXT(" dtlk_ioctl");
+
+       switch (cmd) {
+
+       case DTLK_INTERROGATE:
+               mutex_lock(&dtlk_mutex);
+               sp = dtlk_interrogate();
+               mutex_unlock(&dtlk_mutex);
+               if (copy_to_user(argp, sp, sizeof(struct dtlk_settings)))
+                       return -EINVAL;
+               return 0;
+
+       case DTLK_STATUS:
+               portval = inb_p(dtlk_port_tts);
+               return put_user(portval, argp);
+
+       default:
+               return -EINVAL;
+       }
+}
+
+/* Note that nobody ever sets dtlk_busy... */
+static int dtlk_open(struct inode *inode, struct file *file)
+{
+       TRACE_TEXT("(dtlk_open");
+
+       nonseekable_open(inode, file);
+       switch (iminor(inode)) {
+       case DTLK_MINOR:
+               if (dtlk_busy)
+                       return -EBUSY;
+               return nonseekable_open(inode, file);
+
+       default:
+               return -ENXIO;
+       }
+}
+
+static int dtlk_release(struct inode *inode, struct file *file)
+{
+       TRACE_TEXT("(dtlk_release");
+
+       switch (iminor(inode)) {
+       case DTLK_MINOR:
+               break;
+
+       default:
+               break;
+       }
+       TRACE_RET;
+       
+       del_timer_sync(&dtlk_timer);
+
+       return 0;
+}
+
+static int __init dtlk_init(void)
+{
+       int err;
+
+       dtlk_port_lpc = 0;
+       dtlk_port_tts = 0;
+       dtlk_busy = 0;
+       dtlk_major = register_chrdev(0, "dtlk", &dtlk_fops);
+       if (dtlk_major < 0) {
+               printk(KERN_ERR "DoubleTalk PC - cannot register device\n");
+               return dtlk_major;
+       }
+       err = dtlk_dev_probe();
+       if (err) {
+               unregister_chrdev(dtlk_major, "dtlk");
+               return err;
+       }
+       printk(", MAJOR %d\n", dtlk_major);
+
+       init_waitqueue_head(&dtlk_process_list);
+
+       return 0;
+}
+
+static void __exit dtlk_cleanup (void)
+{
+       dtlk_write_bytes("goodbye", 8);
+       msleep_interruptible(500);              /* nap 0.50 sec but
+                                                  could be awakened
+                                                  earlier by
+                                                  signals... */
+
+       dtlk_write_tts(DTLK_CLEAR);
+       unregister_chrdev(dtlk_major, "dtlk");
+       release_region(dtlk_port_lpc, DTLK_IO_EXTENT);
+}
+
+module_init(dtlk_init);
+module_exit(dtlk_cleanup);
+
+/* ------------------------------------------------------------------------ */
+
+static int dtlk_readable(void)
+{
+#ifdef TRACING
+       printk(" dtlk_readable=%u@%u", inb_p(dtlk_port_lpc) != 0x7f, jiffies);
+#endif
+       return inb_p(dtlk_port_lpc) != 0x7f;
+}
+
+static int dtlk_writeable(void)
+{
+       /* TRACE_TEXT(" dtlk_writeable"); */
+#ifdef TRACINGMORE
+       printk(" dtlk_writeable=%u", (inb_p(dtlk_port_tts) & TTS_WRITABLE)!=0);
+#endif
+       return inb_p(dtlk_port_tts) & TTS_WRITABLE;
+}
+
+static int __init dtlk_dev_probe(void)
+{
+       unsigned int testval = 0;
+       int i = 0;
+       struct dtlk_settings *sp;
+
+       if (dtlk_port_lpc | dtlk_port_tts)
+               return -EBUSY;
+
+       for (i = 0; dtlk_portlist[i]; i++) {
+#if 0
+               printk("DoubleTalk PC - Port %03x = %04x\n",
+                      dtlk_portlist[i], (testval = inw_p(dtlk_portlist[i])));
+#endif
+
+               if (!request_region(dtlk_portlist[i], DTLK_IO_EXTENT, 
+                              "dtlk"))
+                       continue;
+               testval = inw_p(dtlk_portlist[i]);
+               if ((testval &= 0xfbff) == 0x107f) {
+                       dtlk_port_lpc = dtlk_portlist[i];
+                       dtlk_port_tts = dtlk_port_lpc + 1;
+
+                       sp = dtlk_interrogate();
+                       printk("DoubleTalk PC at %03x-%03x, "
+                              "ROM version %s, serial number %u",
+                              dtlk_portlist[i], dtlk_portlist[i] +
+                              DTLK_IO_EXTENT - 1,
+                              sp->rom_version, sp->serial_number);
+
+                        /* put LPC port into known state, so
+                          dtlk_readable() gives valid result */
+                       outb_p(0xff, dtlk_port_lpc); 
+
+                        /* INIT string and index marker */
+                       dtlk_write_bytes("\036\1@\0\0012I\r", 8);
+                       /* posting an index takes 18 msec.  Here, we
+                          wait up to 100 msec to see whether it
+                          appears. */
+                       msleep_interruptible(100);
+                       dtlk_has_indexing = dtlk_readable();
+#ifdef TRACING
+                       printk(", indexing %d\n", dtlk_has_indexing);
+#endif
+#ifdef INSCOPE
+                       {
+/* This macro records ten samples read from the LPC port, for later display */
+#define LOOK                                   \
+for (i = 0; i < 10; i++)                       \
+  {                                            \
+    buffer[b++] = inb_p(dtlk_port_lpc);                \
+    __delay(loops_per_jiffy/(1000000/HZ));             \
+  }
+                               char buffer[1000];
+                               int b = 0, i, j;
+
+                               LOOK
+                               outb_p(0xff, dtlk_port_lpc);
+                               buffer[b++] = 0;
+                               LOOK
+                               dtlk_write_bytes("\0012I\r", 4);
+                               buffer[b++] = 0;
+                               __delay(50 * loops_per_jiffy / (1000/HZ));
+                               outb_p(0xff, dtlk_port_lpc);
+                               buffer[b++] = 0;
+                               LOOK
+
+                               printk("\n");
+                               for (j = 0; j < b; j++)
+                                       printk(" %02x", buffer[j]);
+                               printk("\n");
+                       }
+#endif                         /* INSCOPE */
+
+#ifdef OUTSCOPE
+                       {
+/* This macro records ten samples read from the TTS port, for later display */
+#define LOOK                                   \
+for (i = 0; i < 10; i++)                       \
+  {                                            \
+    buffer[b++] = inb_p(dtlk_port_tts);                \
+    __delay(loops_per_jiffy/(1000000/HZ));  /* 1 us */ \
+  }
+                               char buffer[1000];
+                               int b = 0, i, j;
+
+                               mdelay(10);     /* 10 ms */
+                               LOOK
+                               outb_p(0x03, dtlk_port_tts);
+                               buffer[b++] = 0;
+                               LOOK
+                               LOOK
+
+                               printk("\n");
+                               for (j = 0; j < b; j++)
+                                       printk(" %02x", buffer[j]);
+                               printk("\n");
+                       }
+#endif                         /* OUTSCOPE */
+
+                       dtlk_write_bytes("Double Talk found", 18);
+
+                       return 0;
+               }
+               release_region(dtlk_portlist[i], DTLK_IO_EXTENT);
+       }
+
+       printk(KERN_INFO "DoubleTalk PC - not found\n");
+       return -ENODEV;
+}
+
+/*
+   static void dtlk_handle_error(char op, char rc, unsigned int minor)
+   {
+   printk(KERN_INFO"\nDoubleTalk PC - MINOR: %d, OPCODE: %d, ERROR: %d\n", 
+   minor, op, rc);
+   return;
+   }
+ */
+
+/* interrogate the DoubleTalk PC and return its settings */
+static struct dtlk_settings *dtlk_interrogate(void)
+{
+       unsigned char *t;
+       static char buf[sizeof(struct dtlk_settings) + 1];
+       int total, i;
+       static struct dtlk_settings status;
+       TRACE_TEXT("(dtlk_interrogate");
+       dtlk_write_bytes("\030\001?", 3);
+       for (total = 0, i = 0; i < 50; i++) {
+               buf[total] = dtlk_read_tts();
+               if (total > 2 && buf[total] == 0x7f)
+                       break;
+               if (total < sizeof(struct dtlk_settings))
+                       total++;
+       }
+       /*
+          if (i==50) printk("interrogate() read overrun\n");
+          for (i=0; i<sizeof(buf); i++)
+          printk(" %02x", buf[i]);
+          printk("\n");
+        */
+       t = buf;
+       status.serial_number = t[0] + t[1] * 256; /* serial number is
+                                                    little endian */
+       t += 2;
+
+       i = 0;
+       while (*t != '\r') {
+               status.rom_version[i] = *t;
+               if (i < sizeof(status.rom_version) - 1)
+                       i++;
+               t++;
+       }
+       status.rom_version[i] = 0;
+       t++;
+
+       status.mode = *t++;
+       status.punc_level = *t++;
+       status.formant_freq = *t++;
+       status.pitch = *t++;
+       status.speed = *t++;
+       status.volume = *t++;
+       status.tone = *t++;
+       status.expression = *t++;
+       status.ext_dict_loaded = *t++;
+       status.ext_dict_status = *t++;
+       status.free_ram = *t++;
+       status.articulation = *t++;
+       status.reverb = *t++;
+       status.eob = *t++;
+       status.has_indexing = dtlk_has_indexing;
+       TRACE_RET;
+       return &status;
+}
+
+static char dtlk_read_tts(void)
+{
+       int portval, retries = 0;
+       char ch;
+       TRACE_TEXT("(dtlk_read_tts");
+
+       /* verify DT is ready, read char, wait for ACK */
+       do {
+               portval = inb_p(dtlk_port_tts);
+       } while ((portval & TTS_READABLE) == 0 &&
+                retries++ < DTLK_MAX_RETRIES);
+       if (retries > DTLK_MAX_RETRIES)
+               printk(KERN_ERR "dtlk_read_tts() timeout\n");
+
+       ch = inb_p(dtlk_port_tts);      /* input from TTS port */
+       ch &= 0x7f;
+       outb_p(ch, dtlk_port_tts);
+
+       retries = 0;
+       do {
+               portval = inb_p(dtlk_port_tts);
+       } while ((portval & TTS_READABLE) != 0 &&
+                retries++ < DTLK_MAX_RETRIES);
+       if (retries > DTLK_MAX_RETRIES)
+               printk(KERN_ERR "dtlk_read_tts() timeout\n");
+
+       TRACE_RET;
+       return ch;
+}
+
+static char dtlk_read_lpc(void)
+{
+       int retries = 0;
+       char ch;
+       TRACE_TEXT("(dtlk_read_lpc");
+
+       /* no need to test -- this is only called when the port is readable */
+
+       ch = inb_p(dtlk_port_lpc);      /* input from LPC port */
+
+       outb_p(0xff, dtlk_port_lpc);
+
+       /* acknowledging a read takes 3-4
+          usec.  Here, we wait up to 20 usec
+          for the acknowledgement */
+       retries = (loops_per_jiffy * 20) / (1000000/HZ);
+       while (inb_p(dtlk_port_lpc) != 0x7f && --retries > 0);
+       if (retries == 0)
+               printk(KERN_ERR "dtlk_read_lpc() timeout\n");
+
+       TRACE_RET;
+       return ch;
+}
+
+/* write n bytes to tts port */
+static char dtlk_write_bytes(const char *buf, int n)
+{
+       char val = 0;
+       /*  printk("dtlk_write_bytes(\"%-*s\", %d)\n", n, buf, n); */
+       TRACE_TEXT("(dtlk_write_bytes");
+       while (n-- > 0)
+               val = dtlk_write_tts(*buf++);
+       TRACE_RET;
+       return val;
+}
+
+static char dtlk_write_tts(char ch)
+{
+       int retries = 0;
+#ifdef TRACINGMORE
+       printk("  dtlk_write_tts(");
+       if (' ' <= ch && ch <= '~')
+               printk("'%c'", ch);
+       else
+               printk("0x%02x", ch);
+#endif
+       if (ch != DTLK_CLEAR)   /* no flow control for CLEAR command */
+               while ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0 &&
+                      retries++ < DTLK_MAX_RETRIES)    /* DT ready? */
+                       ;
+       if (retries > DTLK_MAX_RETRIES)
+               printk(KERN_ERR "dtlk_write_tts() timeout\n");
+
+       outb_p(ch, dtlk_port_tts);      /* output to TTS port */
+       /* the RDY bit goes zero 2-3 usec after writing, and goes
+          1 again 180-190 usec later.  Here, we wait up to 10
+          usec for the RDY bit to go zero. */
+       for (retries = 0; retries < loops_per_jiffy / (100000/HZ); retries++)
+               if ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0)
+                       break;
+
+#ifdef TRACINGMORE
+       printk(")\n");
+#endif
+       return 0;
+}
+
+MODULE_LICENSE("GPL");