These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / drivers / bluetooth / Kconfig

diff --git a/kernel/drivers/bluetooth/Kconfig b/kernel/drivers/bluetooth/Kconfig
index ed5c273..ec6af15 100644 (file)
--- a/kernel/drivers/bluetooth/Kconfig
+++ b/kernel/drivers/bluetooth/Kconfig
@@ -4,11 +4,20 @@ menu "Bluetooth device drivers"
 
 config BT_INTEL
        tristate
+       select REGMAP
 
 config BT_BCM
        tristate
        select FW_LOADER
 
+config BT_RTL
+       tristate
+       select FW_LOADER
+
+config BT_QCA
+       tristate
+       select FW_LOADER
+
 config BT_HCIBTUSB
        tristate "HCI USB driver"
        depends on USB
@@ -32,6 +41,17 @@ config BT_HCIBTUSB_BCM
 
          Say Y here to compile support for Broadcom protocol.
 
+config BT_HCIBTUSB_RTL
+       bool "Realtek protocol support"
+       depends on BT_HCIBTUSB
+       select BT_RTL
+       default y
+       help
+         The Realtek protocol support enables firmware and configuration
+         download support for Realtek Bluetooth controllers.
+
+         Say Y here to compile support for Realtek protocol.
+
 config BT_HCIBTSDIO
        tristate "HCI SDIO driver"
        depends on MMC
@@ -117,6 +137,7 @@ config BT_HCIUART_3WIRE
 config BT_HCIUART_INTEL
        bool "Intel protocol support"
        depends on BT_HCIUART
+       select BT_HCIUART_H4
        select BT_INTEL
        help
          The Intel protocol support enables Bluetooth HCI over serial
@@ -135,6 +156,19 @@ config BT_HCIUART_BCM
 
          Say Y here to compile support for Broadcom protocol.
 
+config BT_HCIUART_QCA
+       bool "Qualcomm Atheros protocol support"
+       depends on BT_HCIUART
+       select BT_HCIUART_H4
+       select BT_QCA
+       help
+         The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
+         over serial port interface(H4) between controller and host.
+         This protocol is required for UART clock control for QCA Bluetooth
+         devices.
+
+         Say Y here to compile support for QCA protocol.
+
 config BT_HCIBCM203X
        tristate "HCI BCM203x USB driver"
        depends on USB
@@ -149,7 +183,8 @@ config BT_HCIBCM203X
 
 config BT_HCIBPA10X
        tristate "HCI BPA10x USB driver"
-       depends on USB
+       depends on USB && BT_HCIUART
+       select BT_HCIUART_H4
        help
          Bluetooth HCI BPA10x USB driver.
          This driver provides support for the Digianswer BPA 100/105 Bluetooth
@@ -242,7 +277,7 @@ config BT_MRVL
          The core driver to support Marvell Bluetooth devices.
 
          This driver is required if you want to support
-         Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897.
+         Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
 
          Say Y here to compile Marvell Bluetooth driver
          into the kernel or say M to compile it as module.
@@ -256,7 +291,7 @@ config BT_MRVL_SDIO
          The driver for Marvell Bluetooth chipsets with SDIO interface.
 
          This driver is required if you want to use Marvell Bluetooth
-         devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897
+         devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
          chipsets are supported.
 
          Say Y here to compile support for Marvell BT-over-SDIO driver