--- /dev/null
+/*
+ * drivers/base/power/clock_ops.c - Generic clock manipulation PM callbacks
+ *
+ * Copyright (c) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/pm_clock.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#ifdef CONFIG_PM
+
+enum pce_status {
+ PCE_STATUS_NONE = 0,
+ PCE_STATUS_ACQUIRED,
+ PCE_STATUS_ENABLED,
+ PCE_STATUS_ERROR,
+};
+
+struct pm_clock_entry {
+ struct list_head node;
+ char *con_id;
+ struct clk *clk;
+ enum pce_status status;
+};
+
+/**
+ * pm_clk_enable - Enable a clock, reporting any errors
+ * @dev: The device for the given clock
+ * @ce: PM clock entry corresponding to the clock.
+ */
+static inline int __pm_clk_enable(struct device *dev, struct pm_clock_entry *ce)
+{
+ int ret;
+
+ if (ce->status < PCE_STATUS_ERROR) {
+ ret = clk_enable(ce->clk);
+ if (!ret)
+ ce->status = PCE_STATUS_ENABLED;
+ else
+ dev_err(dev, "%s: failed to enable clk %p, error %d\n",
+ __func__, ce->clk, ret);
+ }
+
+ return ret;
+}
+
+/**
+ * pm_clk_acquire - Acquire a device clock.
+ * @dev: Device whose clock is to be acquired.
+ * @ce: PM clock entry corresponding to the clock.
+ */
+static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
+{
+ if (!ce->clk)
+ ce->clk = clk_get(dev, ce->con_id);
+ if (IS_ERR(ce->clk)) {
+ ce->status = PCE_STATUS_ERROR;
+ } else {
+ clk_prepare(ce->clk);
+ ce->status = PCE_STATUS_ACQUIRED;
+ dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
+ }
+}
+
+static int __pm_clk_add(struct device *dev, const char *con_id,
+ struct clk *clk)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ struct pm_clock_entry *ce;
+
+ if (!psd)
+ return -EINVAL;
+
+ ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+ if (!ce)
+ return -ENOMEM;
+
+ if (con_id) {
+ ce->con_id = kstrdup(con_id, GFP_KERNEL);
+ if (!ce->con_id) {
+ dev_err(dev,
+ "Not enough memory for clock connection ID.\n");
+ kfree(ce);
+ return -ENOMEM;
+ }
+ } else {
+ if (IS_ERR(ce->clk) || !__clk_get(clk)) {
+ kfree(ce);
+ return -ENOENT;
+ }
+ ce->clk = clk;
+ }
+
+ pm_clk_acquire(dev, ce);
+
+ spin_lock_irq(&psd->lock);
+ list_add_tail(&ce->node, &psd->clock_list);
+ spin_unlock_irq(&psd->lock);
+ return 0;
+}
+
+/**
+ * pm_clk_add - Start using a device clock for power management.
+ * @dev: Device whose clock is going to be used for power management.
+ * @con_id: Connection ID of the clock.
+ *
+ * Add the clock represented by @con_id to the list of clocks used for
+ * the power management of @dev.
+ */
+int pm_clk_add(struct device *dev, const char *con_id)
+{
+ return __pm_clk_add(dev, con_id, NULL);
+}
+
+/**
+ * pm_clk_add_clk - Start using a device clock for power management.
+ * @dev: Device whose clock is going to be used for power management.
+ * @clk: Clock pointer
+ *
+ * Add the clock to the list of clocks used for the power management of @dev.
+ * It will increment refcount on clock pointer, use clk_put() on it when done.
+ */
+int pm_clk_add_clk(struct device *dev, struct clk *clk)
+{
+ return __pm_clk_add(dev, NULL, clk);
+}
+
+/**
+ * __pm_clk_remove - Destroy PM clock entry.
+ * @ce: PM clock entry to destroy.
+ */
+static void __pm_clk_remove(struct pm_clock_entry *ce)
+{
+ if (!ce)
+ return;
+
+ if (ce->status < PCE_STATUS_ERROR) {
+ if (ce->status == PCE_STATUS_ENABLED)
+ clk_disable(ce->clk);
+
+ if (ce->status >= PCE_STATUS_ACQUIRED) {
+ clk_unprepare(ce->clk);
+ clk_put(ce->clk);
+ }
+ }
+
+ kfree(ce->con_id);
+ kfree(ce);
+}
+
+/**
+ * pm_clk_remove - Stop using a device clock for power management.
+ * @dev: Device whose clock should not be used for PM any more.
+ * @con_id: Connection ID of the clock.
+ *
+ * Remove the clock represented by @con_id from the list of clocks used for
+ * the power management of @dev.
+ */
+void pm_clk_remove(struct device *dev, const char *con_id)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ struct pm_clock_entry *ce;
+
+ if (!psd)
+ return;
+
+ spin_lock_irq(&psd->lock);
+
+ list_for_each_entry(ce, &psd->clock_list, node) {
+ if (!con_id && !ce->con_id)
+ goto remove;
+ else if (!con_id || !ce->con_id)
+ continue;
+ else if (!strcmp(con_id, ce->con_id))
+ goto remove;
+ }
+
+ spin_unlock_irq(&psd->lock);
+ return;
+
+ remove:
+ list_del(&ce->node);
+ spin_unlock_irq(&psd->lock);
+
+ __pm_clk_remove(ce);
+}
+
+/**
+ * pm_clk_init - Initialize a device's list of power management clocks.
+ * @dev: Device to initialize the list of PM clocks for.
+ *
+ * Initialize the lock and clock_list members of the device's pm_subsys_data
+ * object.
+ */
+void pm_clk_init(struct device *dev)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ if (psd)
+ INIT_LIST_HEAD(&psd->clock_list);
+}
+
+/**
+ * pm_clk_create - Create and initialize a device's list of PM clocks.
+ * @dev: Device to create and initialize the list of PM clocks for.
+ *
+ * Allocate a struct pm_subsys_data object, initialize its lock and clock_list
+ * members and make the @dev's power.subsys_data field point to it.
+ */
+int pm_clk_create(struct device *dev)
+{
+ return dev_pm_get_subsys_data(dev);
+}
+
+/**
+ * pm_clk_destroy - Destroy a device's list of power management clocks.
+ * @dev: Device to destroy the list of PM clocks for.
+ *
+ * Clear the @dev's power.subsys_data field, remove the list of clock entries
+ * from the struct pm_subsys_data object pointed to by it before and free
+ * that object.
+ */
+void pm_clk_destroy(struct device *dev)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ struct pm_clock_entry *ce, *c;
+ struct list_head list;
+
+ if (!psd)
+ return;
+
+ INIT_LIST_HEAD(&list);
+
+ spin_lock_irq(&psd->lock);
+
+ list_for_each_entry_safe_reverse(ce, c, &psd->clock_list, node)
+ list_move(&ce->node, &list);
+
+ spin_unlock_irq(&psd->lock);
+
+ dev_pm_put_subsys_data(dev);
+
+ list_for_each_entry_safe_reverse(ce, c, &list, node) {
+ list_del(&ce->node);
+ __pm_clk_remove(ce);
+ }
+}
+
+/**
+ * pm_clk_suspend - Disable clocks in a device's PM clock list.
+ * @dev: Device to disable the clocks for.
+ */
+int pm_clk_suspend(struct device *dev)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ struct pm_clock_entry *ce;
+ unsigned long flags;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (!psd)
+ return 0;
+
+ spin_lock_irqsave(&psd->lock, flags);
+
+ list_for_each_entry_reverse(ce, &psd->clock_list, node) {
+ if (ce->status < PCE_STATUS_ERROR) {
+ if (ce->status == PCE_STATUS_ENABLED)
+ clk_disable(ce->clk);
+ ce->status = PCE_STATUS_ACQUIRED;
+ }
+ }
+
+ spin_unlock_irqrestore(&psd->lock, flags);
+
+ return 0;
+}
+
+/**
+ * pm_clk_resume - Enable clocks in a device's PM clock list.
+ * @dev: Device to enable the clocks for.
+ */
+int pm_clk_resume(struct device *dev)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ struct pm_clock_entry *ce;
+ unsigned long flags;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (!psd)
+ return 0;
+
+ spin_lock_irqsave(&psd->lock, flags);
+
+ list_for_each_entry(ce, &psd->clock_list, node)
+ __pm_clk_enable(dev, ce);
+
+ spin_unlock_irqrestore(&psd->lock, flags);
+
+ return 0;
+}
+
+/**
+ * pm_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the pm_domain member of that object is copied to the device's
+ * pm_domain field and its con_ids member is used to populate the device's list
+ * of PM clocks, depending on @action.
+ *
+ * If the device's pm_domain field is already populated with a value different
+ * from the one stored in the struct pm_clk_notifier_block object, the function
+ * does nothing.
+ */
+static int pm_clk_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct pm_clk_notifier_block *clknb;
+ struct device *dev = data;
+ char **con_id;
+ int error;
+
+ dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+ clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+ switch (action) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (dev->pm_domain)
+ break;
+
+ error = pm_clk_create(dev);
+ if (error)
+ break;
+
+ dev->pm_domain = clknb->pm_domain;
+ if (clknb->con_ids[0]) {
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ pm_clk_add(dev, *con_id);
+ } else {
+ pm_clk_add(dev, NULL);
+ }
+
+ break;
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (dev->pm_domain != clknb->pm_domain)
+ break;
+
+ dev->pm_domain = NULL;
+ pm_clk_destroy(dev);
+ break;
+ }
+
+ return 0;
+}
+
+#else /* !CONFIG_PM */
+
+/**
+ * enable_clock - Enable a device clock.
+ * @dev: Device whose clock is to be enabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void enable_clock(struct device *dev, const char *con_id)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, con_id);
+ if (!IS_ERR(clk)) {
+ clk_prepare_enable(clk);
+ clk_put(clk);
+ dev_info(dev, "Runtime PM disabled, clock forced on.\n");
+ }
+}
+
+/**
+ * disable_clock - Disable a device clock.
+ * @dev: Device whose clock is to be disabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void disable_clock(struct device *dev, const char *con_id)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, con_id);
+ if (!IS_ERR(clk)) {
+ clk_disable_unprepare(clk);
+ clk_put(clk);
+ dev_info(dev, "Runtime PM disabled, clock forced off.\n");
+ }
+}
+
+/**
+ * pm_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the con_ids member of that object is used to enable or disable
+ * the device's clocks, depending on @action.
+ */
+static int pm_clk_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct pm_clk_notifier_block *clknb;
+ struct device *dev = data;
+ char **con_id;
+
+ dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+ clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+ switch (action) {
+ case BUS_NOTIFY_BIND_DRIVER:
+ if (clknb->con_ids[0]) {
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ enable_clock(dev, *con_id);
+ } else {
+ enable_clock(dev, NULL);
+ }
+ break;
+ case BUS_NOTIFY_UNBOUND_DRIVER:
+ if (clknb->con_ids[0]) {
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ disable_clock(dev, *con_id);
+ } else {
+ disable_clock(dev, NULL);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+#endif /* !CONFIG_PM */
+
+/**
+ * pm_clk_add_notifier - Add bus type notifier for power management clocks.
+ * @bus: Bus type to add the notifier to.
+ * @clknb: Notifier to be added to the given bus type.
+ *
+ * The nb member of @clknb is not expected to be initialized and its
+ * notifier_call member will be replaced with pm_clk_notify(). However,
+ * the remaining members of @clknb should be populated prior to calling this
+ * routine.
+ */
+void pm_clk_add_notifier(struct bus_type *bus,
+ struct pm_clk_notifier_block *clknb)
+{
+ if (!bus || !clknb)
+ return;
+
+ clknb->nb.notifier_call = pm_clk_notify;
+ bus_register_notifier(bus, &clknb->nb);
+}
Code Review / kvmfornfv.git / blobdiff