config ARM64
def_bool y
+ select ACPI_CCA_REQUIRED if ACPI
select ACPI_GENERIC_GSI if ACPI
select ACPI_REDUCED_HARDWARE_ONLY if ACPI
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select ARM_GIC_V2M if PCI_MSI
select ARM_GIC_V3
select ARM_GIC_V3_ITS if PCI_MSI
+ select ARM_PSCI_FW
select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
select COMMON_CLK
select CPU_PM if (SUSPEND || CPU_IDLE)
select DCACHE_WORD_ACCESS
+ select EDAC_SUPPORT
+ select FRAME_POINTER
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
- select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select GENERIC_CLOCKEVENTS_BROADCAST
select GENERIC_CPU_AUTOPROBE
select GENERIC_EARLY_IOREMAP
+ select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_BITREVERSE
select HAVE_ARCH_JUMP_LABEL
+ select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP && !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
select HAVE_ARCH_KGDB
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_C_RECORDMCOUNT
select HAVE_CC_STACKPROTECTOR
select HAVE_CMPXCHG_DOUBLE
+ select HAVE_CMPXCHG_LOCAL
select HAVE_DEBUG_BUGVERBOSE
select HAVE_DEBUG_KMEMLEAK
select HAVE_DMA_API_DEBUG
select HAVE_RCU_TABLE_FREE
select HAVE_PREEMPT_LAZY
select HAVE_SYSCALL_TRACEPOINTS
+ select IOMMU_DMA if IOMMU_SUPPORT
select IRQ_DOMAIN
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_RELA
config RWSEM_XCHGADD_ALGORITHM
def_bool y
+config GENERIC_BUG
+ def_bool y
+ depends on BUG
+
+config GENERIC_BUG_RELATIVE_POINTERS
+ def_bool y
+ depends on GENERIC_BUG
+
config GENERIC_HWEIGHT
def_bool y
config NEED_SG_DMA_LENGTH
def_bool y
+config SMP
+ def_bool y
+
config SWIOTLB
def_bool y
config PGTABLE_LEVELS
int
+ default 2 if ARM64_16K_PAGES && ARM64_VA_BITS_36
default 2 if ARM64_64K_PAGES && ARM64_VA_BITS_42
default 3 if ARM64_64K_PAGES && ARM64_VA_BITS_48
default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39
- default 4 if ARM64_4K_PAGES && ARM64_VA_BITS_48
+ default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47
+ default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48
source "init/Kconfig"
source "kernel/Kconfig.freezer"
-menu "Platform selection"
-
-config ARCH_EXYNOS
- bool
- help
- This enables support for Samsung Exynos SoC family
-
-config ARCH_EXYNOS7
- bool "ARMv8 based Samsung Exynos7"
- select ARCH_EXYNOS
- select COMMON_CLK_SAMSUNG
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_S3C_RTC if RTC_CLASS
- select PINCTRL
- select PINCTRL_EXYNOS
-
- help
- This enables support for Samsung Exynos7 SoC family
-
-config ARCH_FSL_LS2085A
- bool "Freescale LS2085A SOC"
- help
- This enables support for Freescale LS2085A SOC.
-
-config ARCH_MEDIATEK
- bool "Mediatek MT65xx & MT81xx ARMv8 SoC"
- select ARM_GIC
- select PINCTRL
- help
- Support for Mediatek MT65xx & MT81xx ARMv8 SoCs
-
-config ARCH_QCOM
- bool "Qualcomm Platforms"
- select PINCTRL
- help
- This enables support for the ARMv8 based Qualcomm chipsets.
-
-config ARCH_SEATTLE
- bool "AMD Seattle SoC Family"
- help
- This enables support for AMD Seattle SOC Family
-
-config ARCH_TEGRA
- bool "NVIDIA Tegra SoC Family"
- select ARCH_HAS_RESET_CONTROLLER
- select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
- select CLKSRC_MMIO
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- select PINCTRL
- select RESET_CONTROLLER
- help
- This enables support for the NVIDIA Tegra SoC family.
-
-config ARCH_TEGRA_132_SOC
- bool "NVIDIA Tegra132 SoC"
- depends on ARCH_TEGRA
- select PINCTRL_TEGRA124
- select USB_ULPI if USB_PHY
- select USB_ULPI_VIEWPORT if USB_PHY
- help
- Enable support for NVIDIA Tegra132 SoC, based on the Denver
- ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC,
- but contains an NVIDIA Denver CPU complex in place of
- Tegra124's "4+1" Cortex-A15 CPU complex.
-
-config ARCH_SPRD
- bool "Spreadtrum SoC platform"
- help
- Support for Spreadtrum ARM based SoCs
-
-config ARCH_THUNDER
- bool "Cavium Inc. Thunder SoC Family"
- help
- This enables support for Cavium's Thunder Family of SoCs.
-
-config ARCH_VEXPRESS
- bool "ARMv8 software model (Versatile Express)"
- select ARCH_REQUIRE_GPIOLIB
- select COMMON_CLK_VERSATILE
- select POWER_RESET_VEXPRESS
- select VEXPRESS_CONFIG
- help
- This enables support for the ARMv8 software model (Versatile
- Express).
-
-config ARCH_XGENE
- bool "AppliedMicro X-Gene SOC Family"
- help
- This enables support for AppliedMicro X-Gene SOC Family
-
-config ARCH_ZYNQMP
- bool "Xilinx ZynqMP Family"
- help
- This enables support for Xilinx ZynqMP Family
-
-endmenu
+source "arch/arm64/Kconfig.platforms"
menu "Bus support"
If unsure, say Y.
+config ARM64_ERRATUM_834220
+ bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault"
+ depends on KVM
+ default y
+ help
+ This option adds an alternative code sequence to work around ARM
+ erratum 834220 on Cortex-A57 parts up to r1p2.
+
+ Affected Cortex-A57 parts might report a Stage 2 translation
+ fault as the result of a Stage 1 fault for load crossing a
+ page boundary when there is a permission or device memory
+ alignment fault at Stage 1 and a translation fault at Stage 2.
+
+ The workaround is to verify that the Stage 1 translation
+ doesn't generate a fault before handling the Stage 2 fault.
+ Please note that this does not necessarily enable the workaround,
+ as it depends on the alternative framework, which will only patch
+ the kernel if an affected CPU is detected.
+
+ If unsure, say Y.
+
config ARM64_ERRATUM_845719
bool "Cortex-A53: 845719: a load might read incorrect data"
depends on COMPAT
If unsure, say Y.
+config CAVIUM_ERRATUM_22375
+ bool "Cavium erratum 22375, 24313"
+ default y
+ help
+ Enable workaround for erratum 22375, 24313.
+
+ This implements two gicv3-its errata workarounds for ThunderX. Both
+ with small impact affecting only ITS table allocation.
+
+ erratum 22375: only alloc 8MB table size
+ erratum 24313: ignore memory access type
+
+ The fixes are in ITS initialization and basically ignore memory access
+ type and table size provided by the TYPER and BASER registers.
+
+ If unsure, say Y.
+
+config CAVIUM_ERRATUM_23154
+ bool "Cavium erratum 23154: Access to ICC_IAR1_EL1 is not sync'ed"
+ default y
+ help
+ The gicv3 of ThunderX requires a modified version for
+ reading the IAR status to ensure data synchronization
+ (access to icc_iar1_el1 is not sync'ed before and after).
+
+ If unsure, say Y.
+
endmenu
help
This feature enables 4KB pages support.
+config ARM64_16K_PAGES
+ bool "16KB"
+ help
+ The system will use 16KB pages support. AArch32 emulation
+ requires applications compiled with 16K (or a multiple of 16K)
+ aligned segments.
+
config ARM64_64K_PAGES
bool "64KB"
help
This feature enables 64KB pages support (4KB by default)
allowing only two levels of page tables and faster TLB
- look-up. AArch32 emulation is not available when this feature
- is enabled.
+ look-up. AArch32 emulation requires applications compiled
+ with 64K aligned segments.
endchoice
choice
prompt "Virtual address space size"
default ARM64_VA_BITS_39 if ARM64_4K_PAGES
+ default ARM64_VA_BITS_47 if ARM64_16K_PAGES
default ARM64_VA_BITS_42 if ARM64_64K_PAGES
help
Allows choosing one of multiple possible virtual address
space sizes. The level of translation table is determined by
a combination of page size and virtual address space size.
+config ARM64_VA_BITS_36
+ bool "36-bit" if EXPERT
+ depends on ARM64_16K_PAGES
+
config ARM64_VA_BITS_39
bool "39-bit"
depends on ARM64_4K_PAGES
bool "42-bit"
depends on ARM64_64K_PAGES
+config ARM64_VA_BITS_47
+ bool "47-bit"
+ depends on ARM64_16K_PAGES
+
config ARM64_VA_BITS_48
bool "48-bit"
config ARM64_VA_BITS
int
+ default 36 if ARM64_VA_BITS_36
default 39 if ARM64_VA_BITS_39
default 42 if ARM64_VA_BITS_42
+ default 47 if ARM64_VA_BITS_47
default 48 if ARM64_VA_BITS_48
config CPU_BIG_ENDIAN
help
Say Y if you plan on running a kernel in big-endian mode.
-config SMP
- bool "Symmetric Multi-Processing"
- help
- This enables support for systems with more than one CPU. If
- you say N here, the kernel will run on single and
- multiprocessor machines, but will use only one CPU of a
- multiprocessor machine. If you say Y here, the kernel will run
- on many, but not all, single processor machines. On a single
- processor machine, the kernel will run faster if you say N
- here.
-
- If you don't know what to do here, say N.
-
config SCHED_MC
bool "Multi-core scheduler support"
- depends on SMP
help
Multi-core scheduler support improves the CPU scheduler's decision
making when dealing with multi-core CPU chips at a cost of slightly
config SCHED_SMT
bool "SMT scheduler support"
- depends on SMP
help
Improves the CPU scheduler's decision making when dealing with
MultiThreading at a cost of slightly increased overhead in some
config NR_CPUS
int "Maximum number of CPUs (2-4096)"
range 2 4096
- depends on SMP
# These have to remain sorted largest to smallest
default "64"
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
- depends on SMP
+ select GENERIC_IRQ_MIGRATION
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
source kernel/Kconfig.preempt
-
-config UP_LATE_INIT
- def_bool y
- depends on !SMP
-
-config HZ
- int
- default 100
+source kernel/Kconfig.hz
config ARCH_HAS_HOLES_MEMORYMODEL
def_bool y if SPARSEMEM
def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
config HW_PERF_EVENTS
- bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS
- default y
- help
- Enable hardware performance counter support for perf events. If
- disabled, perf events will use software events only.
+ def_bool y
+ depends on ARM_PMU
config SYS_SUPPORTS_HUGETLBFS
def_bool y
def_bool y
config ARCH_WANT_HUGE_PMD_SHARE
- def_bool y if !ARM64_64K_PAGES
+ def_bool y if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
config HAVE_ARCH_TRANSPARENT_HUGEPAGE
def_bool y
config FORCE_MAX_ZONEORDER
int
default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE)
+ default "12" if (ARM64_16K_PAGES && TRANSPARENT_HUGEPAGE)
default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
+ We make sure that we can allocate upto a HugePage size for each configuration.
+ Hence we have :
+ MAX_ORDER = (PMD_SHIFT - PAGE_SHIFT) + 1 => PAGE_SHIFT - 2
+
+ However for 4K, we choose a higher default value, 11 as opposed to 10, giving us
+ 4M allocations matching the default size used by generic code.
menuconfig ARMV8_DEPRECATED
bool "Emulate deprecated/obsolete ARMv8 instructions"
If unsure, say Y
endif
+menu "ARMv8.1 architectural features"
+
+config ARM64_HW_AFDBM
+ bool "Support for hardware updates of the Access and Dirty page flags"
+ default y
+ help
+ The ARMv8.1 architecture extensions introduce support for
+ hardware updates of the access and dirty information in page
+ table entries. When enabled in TCR_EL1 (HA and HD bits) on
+ capable processors, accesses to pages with PTE_AF cleared will
+ set this bit instead of raising an access flag fault.
+ Similarly, writes to read-only pages with the DBM bit set will
+ clear the read-only bit (AP[2]) instead of raising a
+ permission fault.
+
+ Kernels built with this configuration option enabled continue
+ to work on pre-ARMv8.1 hardware and the performance impact is
+ minimal. If unsure, say Y.
+
+config ARM64_PAN
+ bool "Enable support for Privileged Access Never (PAN)"
+ default y
+ help
+ Privileged Access Never (PAN; part of the ARMv8.1 Extensions)
+ prevents the kernel or hypervisor from accessing user-space (EL0)
+ memory directly.
+
+ Choosing this option will cause any unprotected (not using
+ copy_to_user et al) memory access to fail with a permission fault.
+
+ The feature is detected at runtime, and will remain as a 'nop'
+ instruction if the cpu does not implement the feature.
+
+config ARM64_LSE_ATOMICS
+ bool "Atomic instructions"
+ help
+ As part of the Large System Extensions, ARMv8.1 introduces new
+ atomic instructions that are designed specifically to scale in
+ very large systems.
+
+ Say Y here to make use of these instructions for the in-kernel
+ atomic routines. This incurs a small overhead on CPUs that do
+ not support these instructions and requires the kernel to be
+ built with binutils >= 2.25.
+
+endmenu
+
endmenu
menu "Boot options"
config COMPAT
bool "Kernel support for 32-bit EL0"
- depends on !ARM64_64K_PAGES || EXPERT
+ depends on ARM64_4K_PAGES || EXPERT
select COMPAT_BINFMT_ELF
select HAVE_UID16
select OLD_SIGSUSPEND3
the user helper functions, VFP support and the ptrace interface are
handled appropriately by the kernel.
- If you also enabled CONFIG_ARM64_64K_PAGES, please be aware that you
- will only be able to execute AArch32 binaries that were compiled with
- 64k aligned segments.
+ If you use a page size other than 4KB (i.e, 16KB or 64KB), please be aware
+ that you will only be able to execute AArch32 binaries that were compiled
+ with page size aligned segments.
If you want to execute 32-bit userspace applications, say Y.
Code Review / kvmfornfv.git / blobdiff