S5P_CORE_LOCAL_PWR_EN);
}
-void __iomem *cpu_boot_reg_base(void)
+static void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM5;
boot_reg = cpu_boot_reg_base();
if (!boot_reg)
- return ERR_PTR(-ENODEV);
+ return IOMEM_ERR_PTR(-ENODEV);
if (soc_is_exynos4412())
boot_reg += 4*cpu;
else if (soc_is_exynos5420() || soc_is_exynos5800())
*
* Currently this is needed only when booting secondary CPU on Exynos3250.
*/
-static void exynos_core_restart(u32 core_id)
+void exynos_core_restart(u32 core_id)
{
u32 val;
val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG;
pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id));
- pr_info("CPU%u: Software reset\n", core_id);
pmu_raw_writel(EXYNOS_CORE_PO_RESET(core_id), EXYNOS_SWRESET);
}
raw_spin_unlock(&boot_lock);
}
+int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr)
+{
+ int ret;
+
+ /*
+ * Try to set boot address using firmware first
+ * and fall back to boot register if it fails.
+ */
+ ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
+ if (ret && ret != -ENOSYS)
+ goto fail;
+ if (ret == -ENOSYS) {
+ void __iomem *boot_reg = cpu_boot_reg(core_id);
+
+ if (IS_ERR(boot_reg)) {
+ ret = PTR_ERR(boot_reg);
+ goto fail;
+ }
+ __raw_writel(boot_addr, boot_reg);
+ ret = 0;
+ }
+fail:
+ return ret;
+}
+
+int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr)
+{
+ int ret;
+
+ /*
+ * Try to get boot address using firmware first
+ * and fall back to boot register if it fails.
+ */
+ ret = call_firmware_op(get_cpu_boot_addr, core_id, boot_addr);
+ if (ret && ret != -ENOSYS)
+ goto fail;
+ if (ret == -ENOSYS) {
+ void __iomem *boot_reg = cpu_boot_reg(core_id);
+
+ if (IS_ERR(boot_reg)) {
+ ret = PTR_ERR(boot_reg);
+ goto fail;
+ }
+ *boot_addr = __raw_readl(boot_reg);
+ ret = 0;
+ }
+fail:
+ return ret;
+}
+
static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
boot_addr = virt_to_phys(exynos4_secondary_startup);
- /*
- * Try to set boot address using firmware first
- * and fall back to boot register if it fails.
- */
- ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
- if (ret && ret != -ENOSYS)
+ ret = exynos_set_boot_addr(core_id, boot_addr);
+ if (ret)
goto fail;
- if (ret == -ENOSYS) {
- void __iomem *boot_reg = cpu_boot_reg(core_id);
-
- if (IS_ERR(boot_reg)) {
- ret = PTR_ERR(boot_reg);
- goto fail;
- }
- __raw_writel(boot_addr, boot_reg);
- }
call_firmware_op(cpu_boot, core_id);
udelay(10);
}
+ if (pen_release != -1)
+ ret = -ETIMEDOUT;
+
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
boot_addr = virt_to_phys(exynos4_secondary_startup);
- ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
- if (ret && ret != -ENOSYS)
+ ret = exynos_set_boot_addr(core_id, boot_addr);
+ if (ret)
break;
- if (ret == -ENOSYS) {
- void __iomem *boot_reg = cpu_boot_reg(core_id);
-
- if (IS_ERR(boot_reg))
- break;
- __raw_writel(boot_addr, boot_reg);
- }
}
}