#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/sys_soc.h>
-#include <linux/timex.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/irqchip/arm-vic.h>
#include <linux/reboot.h>
#include <linux/usb/ohci_pdriver.h>
+#include <linux/random.h>
#include <mach/hardware.h>
#include <linux/platform_data/video-ep93xx.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/time.h>
#include "soc.h"
iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
}
-
-/*************************************************************************
- * Timer handling for EP93xx
- *************************************************************************
- * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and
- * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
- * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz,
- * is free-running, and can't generate interrupts.
- *
- * The 508 kHz timers are ideal for use for the timer interrupt, as the
- * most common values of HZ divide 508 kHz nicely. We pick one of the 16
- * bit timers (timer 1) since we don't need more than 16 bits of reload
- * value as long as HZ >= 8.
- *
- * The higher clock rate of timer 4 makes it a better choice than the
- * other timers for use in gettimeoffset(), while the fact that it can't
- * generate interrupts means we don't have to worry about not being able
- * to use this timer for something else. We also use timer 4 for keeping
- * track of lost jiffies.
- */
-#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7)
-#define EP93XX_TIMER123_CONTROL_MODE (1 << 6)
-#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3)
-#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8)
-#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
-
-#define EP93XX_TIMER123_CLOCK 508469
-#define EP93XX_TIMER4_CLOCK 983040
-
-#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1)
-#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ)
-
-static unsigned int last_jiffy_time;
-
-static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
-{
- /* Writing any value clears the timer interrupt */
- __raw_writel(1, EP93XX_TIMER1_CLEAR);
-
- /* Recover lost jiffies */
- while ((signed long)
- (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
- >= TIMER4_TICKS_PER_JIFFY) {
- last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
- timer_tick();
- }
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction ep93xx_timer_irq = {
- .name = "ep93xx timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = ep93xx_timer_interrupt,
-};
-
-static u32 ep93xx_gettimeoffset(void)
-{
- int offset;
-
- offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
-
- /*
- * Timer 4 is based on a 983.04 kHz reference clock,
- * so dividing by 983040 gives the fraction of a second,
- * so dividing by 0.983040 converts to uS.
- * Refactor the calculation to avoid overflow.
- * Finally, multiply by 1000 to give nS.
- */
- return (offset + (53 * offset / 3072)) * 1000;
-}
-
-void __init ep93xx_timer_init(void)
-{
- u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
- EP93XX_TIMER123_CONTROL_CLKSEL;
-
- arch_gettimeoffset = ep93xx_gettimeoffset;
-
- /* Enable periodic HZ timer. */
- __raw_writel(tmode, EP93XX_TIMER1_CONTROL);
- __raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
- __raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
- EP93XX_TIMER1_CONTROL);
-
- /* Enable lost jiffy timer. */
- __raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
- EP93XX_TIMER4_VALUE_HIGH);
-
- setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
-}
-
-
/*************************************************************************
* EP93xx IRQ handling
*************************************************************************/
if (id != id2)
return "invalid";
+ /* Toss the unique ID into the entropy pool */
+ add_device_randomness(&id2, 4);
+ add_device_randomness(&id3, 4);
+ add_device_randomness(&id4, 4);
+ add_device_randomness(&id5, 4);
+
snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id),
"%08x%08x%08x%08x", id2, id3, id4, id5);
Code Review / kvmfornfv.git / blobdiff